Characterizing Biochar as Alternative Sorbent for Oil Spill Remediation

Adsorption Technology for PFAS Removal in Water: Comparison between Novel Carbonaceous Materials

PFASs are a variety of ecologically persistent compounds of anthropogenic origin loosely included in many industrial products. In these, the carbon chain can be fully (perfluoroalkyl substances) or partially (polyfluoroalkyl substances) fluorinated. Their ubiquitous presence in many environmental compartments over the years and their long-lasting nature have given rise to concerns about the possible adverse effects of PFASs on ecosystems and human health. Among a number of remediation technologies, adsorption has been demonstrated to be a manageable and cost-effective method for the removal of PFASs in aqueous media. This study tested two novel and eco-friendly adsorbents (pinewood and date seeds biochar) on six different PFASs (PFOS, GenX, PFHxA, PFOA, PFDA, and PFTeDA). Batch sorption tests (24 h) were carried out to evaluate the removal efficiency of each PFAS substance in relation to the two biochars. All samples of liquid phase were analyzed by a developed and then a well-established method: (i) pre-treatment (centrifugation and filtration) and (ii) determination by high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS/MS). The results evidenced a comparable adsorption capacity in both materials but greater in the long-chain PFASs. Such findings may lead to a promising path towards the use of waste-origin materials in the PFAS remediation field.

Advancements in Detection and Mitigation Strategies for Petroleum-Derived Contaminants in Aquatic Environments: A Comprehensive Review

The exponential increase in the production and transportation of petroleum-derived products observed in recent years has been driven by the escalating demand for energy, textiles, plastic-based materials, and other goods derived from petroleum. Consequently, there has been a corresponding rise in spills of these petroleum derivatives, particularly in water sources utilized for transportation or, occasionally, illegally utilized for tank cleaning or industrial equipment maintenance. Numerous researchers have proposed highly effective techniques for detecting these products, aiming to facilitate their cleanup or containment and thereby minimize environmental pollution. However, many of these techniques rely on the identification of individual compounds, which presents significant drawbacks, including complexity of handling, subjectivity, lengthy analysis times, infeasibility for in situ analysis, and high costs. In response, there has been a notable surge in the utilization of sensors or generalized profiling techniques serving as sensors to generate characteristic fingerprints of these products, thereby circumventing the aforementioned disadvantages. This review comprehensively examines the evolution of techniques employed for detecting petroleum-derived products in water samples, along with their associated advantages and disadvantages. Furthermore, the review examines current perspectives on methods for the removal and/or containment of these products from water sources, to minimize their environmental impact and the associated health repercussions on living organisms and ecosystems.

Effects of biochar immobilization of Serratia sp. F4 OR414381 on bioremediation of petroleum contamination and bacterial community composition in loess soil

Petroleum hydrocarbons pose a significant threat to human health and the environment. Biochar has increasingly been utilized for soil remediation. This study investigated the potential of biochar immobilization using Serratia sp. F4 OR414381 for the remediation of petroleum-contaminated soil through a pot experiment conducted over 90 days. The treatments in this study, denoted as IMs (maize straw biochar-immobilized Serratia sp. F4), degraded 82.5% of the total petroleum hydrocarbons (TPH), 59.23% of the aromatic, and 90.1% of the saturated hydrocarbon fractions in the loess soils. During remediation, the soil pH values decreased from 8.76 to 7.33, and the oxidation-reduction potential (ORP) increased from 156 to 229 mV. The treatment-maintained soil nutrients of the IMs were 138.94 mg/kg of NO3- -N and 92.47 mg/kg of available phosphorus (AP), as well as 11.29% of moisture content. The activities of soil dehydrogenase (SDHA) and catalase (CAT) respectively increased by 14% and 15 times compared to the CK treatment. Three key petroleum hydrocarbon degradation genes, including CYP450, AJ025, and xylX were upregulated following IMs treatment. Microbial community analysis revealed that a substantial microbial population of 1.01E+ 09 cells/g soil and oil-degrading bacteria such as Salinimicrobium, Saccharibacteria_genera_incertae_sedis, and Brevundimonas were the dominant genera in IMs treatment. This suggests that the biochar immobilized on Serratia sp. F4 OR414381 improves soil physicochemical properties and enhances interactions among microbial populations, presenting a promising and environmentally friendly approach for the stable and efficient remediation of petroleum-contaminated loess soil.

Biochar-based materials as remediation strategy in petroleum hydrocarbon-contaminated soil and water: Performances, mechanisms, and environmental impact

Petroleum contamination is considered as a major risk to the health of humans and environment. Biochars as low-cost and eco-friendly carbon materials, have been widely used for the removal of petroleum hydrocarbon in the environment. The purpose of this paper is to review the performance, mechanisms, and potential environmental toxicity of biochar, modified biochar and its integration use with other materials in petroleum contaminated soil and water. Specifically, the use of biochar in oil-contaminated water and soil as well as the factors that could influence the removal ability of biochar were systematically evaluated. In addition, the modification and integrated use of biochar for improving the removal efficiency were summarized from the aspects of sorption, biodegradation, chemical degradation, and reusability. Moreover, the functional impacts and associated ecotoxicity of pristine and modified biochars in various environments were demonstrated. Finally, some shortcoming of current approaches, and future research needs were provided for the future direction and challenges of modified biochar research. Overall, this paper gain insight into biochar application in petroleum remediation from the perspectives of performance enhancement and environmental sustainability.

Development of sludge-based activated char sorbent with enhanced hydrophobicity for oil spill cleanup

Recovery of oil spilled on surface waters by the use of sorbents remains one of the primary oil spill response options available. To improve on this response measure, we have successfully fabricated an activated char (AC) sorbent material by pyrolysis of sewage sludge (SS), a readily available waste product generated across the world from wastewater treatment plants. The inherent Fe-minerals in SS texture were converted to magnetic Fe₃O₄ particles during the pyrolysis reaction. The AC provided a unique means to recover the sorbent after the oil sorption process with a magnetic field. Meanwhile, a superhydrophobic sorbent material with a water contact angle of 152.2° was created by the treatment of AC with myristic acid which could float on the water surface. Feasibility studies at the laboratory-scale were conducted with motor oil and light crude oil to evaluate its potential use in spill response operations. Results showed a sorption capacity of about 8.5 and 10.7 g/g for motor oil and light crude oil, respectively. Following the recovery of the test oils by ethanol stripping, the material could be recycled up to 5 times with trivial loss in sorption capacity. This research proposes a framework for the development of a highly efficient sorbent material for oil spill response operations from SS waste.

Enhancing the Anaerobic Biodegradation of Petroleum Hydrocarbons in Soils with Electrically Conductive Materials

Anaerobic bioremediation is a relevant process in the management of sites contaminated by petroleum hydrocarbons. Recently, interspecies electron transfer processes mediated by conductive minerals or particles have been proposed as mechanisms through which microbial species within a community share reducing equivalents to drive the syntrophic degradation of organic substrates, including hydrocarbons. Here, a microcosm study was set up to investigate the effect of different electrically conductive materials (ECMs) in enhancing the anaerobic biodegradation of hydrocarbons in historically contaminated soil. The results of a comprehensive suite of chemical and microbiological analyses evidenced that supplementing the soil with (5% w/w) magnetite nanoparticles or biochar particles is an effective strategy to accelerate the removal of selected hydrocarbons. In particular, in microcosms supplemented with ECMs, the removal of total petroleum hydrocarbons was enhanced by up to 50% relative to unamended controls. However, chemical analyses suggested that only a partial bioconversion of contaminants occurred and that longer treatment times would have probably been required to drive the biodegradation process to completion. On the other hand, biomolecular analyses confirmed the presence of several microorganisms and functional genes likely involved in hydrocarbon degradation. Furthermore, the selective enrichment of known electroactive bacteria (i.e., Geobacter and Geothrix) in microcosms amended with ECMs, clearly pointed to a possible role of DIET (Diet Interspecies Electron Transfer) processes in the observed removal of contaminants.

Evaluation and characterization of biochar on the biogeochemical behavior of polycyclic aromatic hydrocarbons in mangrove wetlands

As the inter-tidal regions between land and ocean, mangrove ecosystems have high polycyclic aromatic hydrocarbons (PAHs) content, and the over accumulation of PAHs in mangrove wetland poses a serious ecological risk to the health of plant and living creatures. Comparison to the agricultural sources -biochar, biochar produced from wetland plant has lower O/C (molar ratio), larger N contents, higher stability and more benefits. However, whether the rhizosphere action occurs in biochar- amended sediment and how to influence the biogeochemical behavior of PAH have rarely been reported. In this context, a leaching procedure and pot experiment (60-d) were performed on migration and transformation of PAH at the sediment, and toxicity and their bioavailability in plant affected by the presence of Kandelia obovate-derived biochar in Southeast China. Root exudates amendments significantly increased the cumulative leaching-loss of pyrene by 36-51 % with or without biochar amendment via continuous diffusion and partition process, and biochar amendments decreased the bioavailability of pyrene (16.8-25.8 %) probably due to a faster pyrene sorption on inter-phase transport against desorption. The regression analysis indicated a significant relationship (p < 0.05) between leachate pH and pyrene concentrations. Notably, the bioaccumulation of pyrene on K. obovate parts had significant negative correlation (p < 0.05) to biochar. The activities of four key antioxidizes (phenylalanine ammonia-lyase, dismutases, peroxidases and catalases) were significantly decreased with the application of biochar. Moreover, biochar plays a positive role in cytochrome C release and phosphatidylserine secretion, and a combined biochar-rhizosphere approach can improve the stress tolerance and resistance of K. obovate with an enhanced synergetic effect, which could be a feasible remediation strategy for alleviating the mangrove sediment contaminated by PAH.

Prediction of Oil Sorption Capacity on Carbonized Mixtures of Shungite Using Artificial Neural Networks

Using the mixture of carbonized rice husk and shungite from the Kazakhstan Koksu deposit and the experimentally determined oil sorption capacity from contaminated soil with oil originating in the Karazhanbas oil field, a set of Artificial Neural Network (ANN) models were built for sorption predictions. The ANN architecture design, training, validation and testing methodology were performed, and the sorption capacity prediction was evaluated. The ANN models were successfully trained for capturing the sorption capacity dependence on time and on a carbonized rice husk and shungite mixture ratio for the 10% and 15% oil-contaminated soil. The best trained ANNs revealed a very good prediction capability for the testing data subset, demonstrated by the high coefficient of the determination values of R2 = 0.998 and R2 = 0.981 and the mean absolute percentage errors ranging from 1.60% to 3.16%. Furthermore, the ANN sorption models proved their interpolation ability and utility for predicting the sorption capacity for any time moments in the investigated time interval of 60 days and for new values of the shungite and rice husk mixture ratios. The ANN developed models open opportunities for planning new experiments, maximizing the sorption performance and for the design of dedicated equipment.

A review on influence of biochar amendment on soil processes and environmental remediation

Biochar is the thermal degradation product of biomass generated in an oxygen-limited environment under different pyrolysis conditions. Biochar characteristics are functions of the feedstock material and pyrolysis temperature. Depending on pyrolysis conditions biochar concentrates varying quantities of recalcitrant and labile carbon along with nutrients which in turn affect soil physiochemical properties and microbial processes. Biochar in soil balances carbon content encourages nitrogen fixation and solubilize phosphorus along with enhancing soil enzyme activity. It serves as a microhabitat for microorganisms present in soil thus influences the diversity, composition, and distribution of soil microbial communities by affecting their intra- and interspecific communication. This review provides an overview of the current knowledge about biochar characteristics, its interactions with soil, and associated biota and its role in soil remediation. In addition, this paper also discussed the factors affecting the capacity of biochar to adsorb organic pollutants following different mechanisms. Being an effective adsorbent due its high specific surface area, large porosity, and numerous surface functional groups biochar has been explored extensively in field of environment to remediate contaminated soils.

Passive electrobioremediation approaches for enhancing hydrocarbons biodegradation in contaminated soils

Electrobioremediation technologies hold considerable potential for the treatment of soils contaminated by petroleum hydrocarbons (PH), since they allow stimulating biodegradation processes with no need for subsurface chemicals injection and with little to no energy consumption. Here, a microbial electrochemical snorkel (MES) was applied for the treatment of a soil contaminated by hydrocarbons. The MES consists of direct coupling of a microbial anode with a cathode, being a single conductive, non-polarized material positioned suitably to create an electrochemical connection between the anoxic zone (the contaminated soil) and the oxic zone (the overlying oxygenated water). Soil was also supplemented with electrically conductive particles of biochar as a strategy to construct a conductive network with microbes in the soil matrix, thus extending the radius of influence of the snorkel. The results of a comprehensive suite of chemical, microbiological and ecotoxicological analyses evidenced that biochar addition, rather than the presence of a snorkel, was the determining factor in accelerating PH removal from contaminated soils, possibly accelerating syntrophic and/or cooperative metabolisms involved in the degradation of PH. The enhancement of biodegradation was mirrored by an increased abundance of anaerobic and aerobic microorganisms known to be involved in the degradation of PH and related functional genes. Plant ecotoxicity assays confirmed a reduction of soils toxicity in treatments receiving electrically conductive biochar.

Hierarchical porous mussel shells as soil amendment for oil spill remediation

In this work, a new type of micromesoporous substance was prepared with fatty alcohol-polyoxyethylene ether (AEO) surfactant freezing penetration and pyrolysis using shells as raw materials. The obtained material exhibited good adsorbability and could be added to oil-contaminated soil to adsorb the pollutant, which resulted in the regeneration of the initially polluted soil. It was determined that the main component of the developed substance was CaCO₃. Importantly, the conducted experiments revealed that the obtained mussel micromesoporous material displayed certain adsorption effects toward petroleum hydrocarbons in a diesel solution. Moreover, it was found that chemical adsorption was more optimal than physical adsorption. The soil remediation effect was the best when the content of the mussel micromesoporous material in the soil was 400 g/kg. Under these conditions, the removal rate of petroleum hydrocarbon was established at 49.38%. This study indicated that micromesoporous material has great potential in the application of oil contaminated soil remediation.

A Polyhydroxybutyrate (PHB)-Biochar Reactor for the Adsorption and Biodegradation of Trichloroethylene: Design and Startup Phase

In this work, polyhydroxy butyrate (PHB) and biochar from pine wood (PWB) are used in a mini-pilot scale biological reactor (11.3 L of geometric volume) for trichloroethylene (TCE) removal (80 mgTCE/day and 6 L/day of flow rate). The PHB-biochar reactor was realized with two sequential reactive areas to simulate a multi-reactive permeable barrier. The PHB acts as an electron donor source in the first “fermentative” area. First, the thermogravimetric (TGA) and differential scanning calorimetry (DSC) analyses were performed. The PHB-powder and pellets have different purity (96% and 93% w/w) and thermal properties. These characteristics may affect the biodegradability of the biopolymer. In the second reactive zone, the PWB works as a Dehalococcoides support and adsorption material since its affinity for chlorinated compounds and the positive effect of the “coupled adsorption and biodegradation” process has been already verified. A specific dechlorinating enriched culture has been inoculated in the PWB zone to realize a coupled adsorption and biodegradation process. Organic acids were revealed since the beginning of the test, and during the monitoring period the reductive dichlorination anaerobic pathway was observed in the first zone; no chlorinated compounds were detected in the effluent thanks to the PWB adsorption capacity.

Synthetic and Natural Surfactants for Potential Application in Mobilization of Organic Contaminants: Characterization and Batch Study

In this paper, we investigated the abilities of five sugar-based synthetic surfactants and biosurfactants from three different families (i.e., alkyl polyglycoside (APG), sophorolipid (SL), and rhamnolipid (RL)) to dissolve and mobilize non-aqueous phase liquid (NAPL) components, i.e., toluene and perchloroethylene (PCE), adsorbed on porous matrices. The objective of this study was to establish a benchmark for the selection of suitable surfactants for the flushing aquifer remediation technique. The study involved a physicochemical characterization of the surfactants to determine the critical micelle concentration (CMCs) and interfacial properties. Subsequently, a batch study, through the construction of adsorption isotherms, made it possible to evaluate the surfactants’ capacities in contaminant mobilization via the reduction of their adsorptions onto a reference adsorbent material, a pine wood biochar (PWB). The results indicate that a synthetic surfactant from the APG family with a long fatty acid chain and a di-rhamnolipid biosurfactant with a shorter hydrophobic group offered the highest efficiency values; they reduced water surface tension by up to 54.7% and 52%, respectively. These two surfactants had very low critical micelle concentrations (CMCs), 0.0071 wt% and 0.0173 wt%, respectively; this is critical from an economical point of view. The batch experiments showed that these two surfactants, at concentrations just five times their CMCs, were able to reduce the adsorption of toluene on PWB by up to 74% and 65%, and of PCE with APG and RL by up to 65% and 86%, respectively. In general, these results clearly suggest the possibility of using these two surfactants in surfactant-enhanced aquifer remediation technology.

A review of the in-situ capping amendments and modeling approaches for the remediation of contaminated marine sediments

Contaminated sediments can pose long-term risks to human beings and ecosystems as they accumulate inorganic and organic contaminants becoming a sink and source of pollution. Compared to ex-situ technologies (i.e., dredging activities and off site treatments), in-situ capping (ISC) intends to minimize contaminated sediment mobilization and impact into the water column whilst treating contamination. Literature shows that numerous types of ISC amendments in presence of both organic and inorganic pollutants are investigated, although a few are contributions whose experiments have been designed and conducted with a view to future engineering. Against this background of shortcomings, this review paper intends to investigate ISC reliability, applicability and its long-term effectiveness, by also comparing reactive and physical ISCs. Additionally, an examination of the main numerical simulations applied to ISC technology was carried out. We found that activated carbon and organoclay resulted the most studied amendments for organically contaminated sediment, whereas biochar, clay minerals, and industrial-by products were more employed in presence of sediment contaminated by metal(loids). There is no better ISC system in absolute terms, since technological performance depends on many factors and only a few experimental investigations included a long-term modeling phase to predict ISC long-term efficiency. Most of numerical models included simplified transport equations based on diffusion and adsorption, and the goodness of fitting between experimental and modeled data was not always computed. The review finally discusses new research directions such as the need for long-term applications on field-scale and cap effectiveness in presence of site-specific tidal forces and currents.

Coupled Adsorption and Biodegradation of Trichloroethylene on Biochar from Pine Wood Wastes: A Combined Approach for a Sustainable Bioremediation Strategy

Towards chlorinated solvents, the effectiveness of the remediation strategy can be improved by combining a biological approach (e.g., anaerobic reductive dechlorination) with chemical/physical treatments (e.g., adsorption). A coupled adsorption and biodegradation (CAB) process for trichloroethylene (TCE) removal is proposed in a biofilm-biochar reactor (BBR) to assess whether biochar from pine wood (PWB) can support a dechlorinating biofilm by combining the TCE (100 µM) adsorption. The BBR operated for eight months in parallel with a biofilm reactor (BR)-no PWB (biological process alone), and with an abiotic biochar reactor (ABR)-no dechlorinating biofilm (only an adsorption mechanism). Two flow rates were investigated. Compared to the BR, which resulted in a TCE removal of 86.9 ± 11.9% and 78.73 ± 19.79%, the BBR demonstrated that PWB effectively adsorbs TCE and slows down the release of its intermediates. The elimination of TCE was quantitative, with 99.61 ± 0.79% and 99.87 ± 0.51% TCE removal. Interestingly, the biomarker of the reductive dechlorination process, Dehalococcoides mccartyi, was found in the BRR (9.2 × 10⁵ 16S rRNA gene copies/g), together with the specific genes tceA, bvcA, and vcrA (8.16 × 10⁶, 1.28 × 10⁵, and 8.01 × 10³ gene copies/g, respectively). This study suggests the feasibility of biochar to support the reductive dechlorination of D. mccartyi, opening new frontiers for field-scale applications.

Novel insights into the adsorption of organic contaminants by biochar: A review

With rising concerns in the practical application of biochar for the remediation of environment influenced by various organic contaminants, a critical review to facilitate insights the crucial role that biochar has played in wastewater and polluted soil decontamination is urgently needed. This research therefore aimed to describe different intriguing dimensions of biochar interactions with organic contaminants, which including: (i) an introduction of biochar preparation and the related physicochemical properties, (ii) an overview of mechanisms and factors controlling the adsorption of organic contaminants onto biochar, and (iii) a summary of the challenges and an outlook of the further research needs in this issue. In the light of the survey consequences, the appearance of biochar indicates the potential in substituting the existing costly adsorbents, and it has been proved that biochar is one promising adsorbent for organic pollutants adsorption removal from water and soil. However, some research gaps, such as dynamic adsorption, potential environmental risks, interactions between biochar and soil microbes, novel modification techniques, need to be further investigated to facilitate its practical application. This research will be conductive to better understanding the adsorption removal of organic contaminants by biochar.

Propensity and appraisal of biochar performance in removal of oil spills: A comprehensive review

Recently, the adsorption-based environmental remediation techniques have gained a considerable attention, due to their economic viability and simplicity over other methods. Hence, detailed presentation and analysis were herein focused on describing the role of biochar in oil spill removal. Oil removal by utilizing biochar is assumed as a green-oriented concept. Biochar is a carbon-rich low-cost material with high porosity and specific surface chemistry, with a tremendous potentiality for oil removal from aqueous solutions. Oil sorption properties of biochar mainly depend on the biochar production/synthesis method, and the biomass feedstock type. In order to preserve the stability of functional groups in the structure, biochar needs to be produced/activated at low temperatures (<700 ᵒC). In general, biochar derived from biomass containing high lignin content via slow pyrolysis is more favorable for oil removal. Exceptional characteristics of biochar which intensify the oil removal capability such as hydrophobicity, oleophilicity or/and specific contaminant-surface interaction of biochar can be enhanced and be tuned by chemical and physical activation methods. Considering all the presented results, future perspectives such as the examination of biochar efficacy on oil removal efficiency in multi-element contaminated aqueous solutions to identify the best biomass feedstocks, the production protocols and large-scale field trials, are also discussed.

Combined Strategies to Prompt the Biological Reduction of Chlorinated Aliphatic Hydrocarbons: New Sustainable Options for Bioremediation Application

Groundwater remediation is one of the main objectives to minimize environmental impacts and health risks. Chlorinated aliphatic hydrocarbons contamination is prevalent and presents particularly challenging scenarios to manage with a single strategy. Different technologies can manage contamination sources and plumes, although they are usually energy-intensive processes. Interesting alternatives involve in-situ bioremediation strategies, which allow the chlorinated contaminant to be converted into non-toxic compounds by indigenous microbial activity. Despite several advantages offered by the bioremediation approaches, some limitations, like the relatively low reaction rates and the difficulty in the management and control of the microbial activity, can affect the effectiveness of a bioremediation approach. However, those issues can be addressed through coupling different strategies to increase the efficiency of the bioremediation strategy. This mini review describes different strategies to induce the reduction dechlorination reaction by the utilization of innovative strategies, which include the increase or the reduction of contaminant mobility as well as the use of innovative strategies of the reductive power supply. Subsequently, three future approaches for a greener and more sustainable intervention are proposed. In particular, two bio-based materials from renewable resources are intended as alternative, long-lasting electron-donor sources (e.g., polyhydroxyalkanoates from mixed microbial cultures) and a low-cost adsorbent (e.g., biochar from bio-waste). Finally, attention is drawn to novel bio-electrochemical systems that use electric current to stimulate biological reactions.

Phytotoxicity of petroleum hydrocarbons: Sources, impacts and remediation strategies

Extraction and exploration of petroleum hydrocarbons (PHs) to satisfy the rising world population's fossil fuel demand is playing havoc with human beings and other life forms by contaminating the ecosystem, particularly the soil. In the current review, we highlighted the sources of PHs contamination, factors affecting the PHs accumulation in soil, mechanisms of uptake, translocation and potential toxic effects of PHs on plants. In plants, PHs reduce the seed germination andnutrients translocation, and induce oxidative stress, disturb the plant metabolic activity and inhibit the plant physiology and morphology that ultimately reduce plant yield. Moreover, the defense strategy in plants to mitigate the PHs toxicity and other potential remediation techniques, including the use of organic manure, compost, plant hormones, and biochar, and application of microbe-assisted remediation, and phytoremediation are also discussed in the current review. These remediation strategies not only help to remediate PHs pollutionin the soil rhizosphere but also enhance the morphological and physiological attributes of plant and results to improve crop yield under PHs contaminated soils. This review aims to provide significant information on ecological importance of PHs stress in various interdisciplinary investigations and critical remediation techniques to mitigate the contamination of PHs in agricultural soils.

A critical review on the formation, fate and degradation of the persistent organic pollutant hexachlorocyclohexane in water systems and waste streams

The environmental impacts of persistent organic pollutants (POPs) is an increasingly prominent topic in the scientific community. POPs are stable chemicals that are accumulated in living beings and can act as endocrine disruptors or carcinogens on prolonged exposure. Although efforts have been taken to minimize or ban the use of certain POPs, their use is still widespread due to their importance in several industries. As a result, it is imperative that POPs in the ecosystem are degraded efficiently and safely in order to avoid long-lasting environmental damage. This review focuses on the degradation techniques of hexachlorocyclohexane (HCH), a pollutant that has strong adverse effects on a variety of organisms. Different technologies such as adsorption, bioremediation and advanced oxidation process have been critically analyzed in this study. All 3 techniques have exhibited near complete removal of HCH under ideal conditions, and the median removal efficiency values for adsorption, bioremediation and advanced oxidation process were found to be 80%, 93% and 82% respectively. However, it must be noted that there is no ideal HCH removal technique and the selection of removal method depends on several factors. Furthermore, the fates of HCH in the environment and challenges faced by HCH degradation have also been explained in this study. The future scope for research in this field has also received attention.

Biochar from Pine Wood, Rice Husks and Iron-Eupatorium Shrubs for Remediation Applications: Surface Characterization and Experimental Tests for Trichloroethylene Removal

Nowadays porous materials from organic waste, i.e., Biochar (BC), are receiving increased attention for environmental applications. This study adds information on three BCs that have undergone a number of studies in recent years. A Biochar from pine wood, one from rice husk and one from Eupatorium shrubs enriched with Iron, labelled as PWBC, RHBC and EuFeBC respectively, are evaluated for Trichloroethylene (TCE) removal from aqueous solution. Physical-chemical description is performed by SEM-EDS and BET analysis. The decrease of TCE over time follows a pseudo-second order kinetics with increased removal by the PWBC. Freundlich and Langmuir models well fit equilibrium test data. The optimized values of the maximum adsorbed amount, q_max (mg g⁻¹), follows this order 109.41 PWBC > 30.35 EuFeBC > 21.00 RHBC. Fixed-bed columns are also carried out. Best performance is again achieved by PWBC, which operates for a higher number of pore volume, followed by EuFeBC and RHBC. Continuous testing confirms batch studies and makes it possible to evaluate the workability of materials in configurations closer to reality. Results are promising for potential environmental application. In particular, the characterization of several classes of contaminants opens the doors to possible uses in mixed contamination cases.

Specific enrichment of hydrocarbonclastic bacteria from diesel-amended soil on biochar particles

Biochar has been proposed as a suitable biostimulant for the remediation of hydrocarbon contamination, and also has the potential to act as a carrier for hydrocarbonoclastic microorganisms which could bioaugment endogenous microbial communities. However, the evidence regarding the biostimulatory effects of biochars on hydrocarbon bioremediation is somewhat equivocal, possibly due to variability of the physicochemical properties of biochar and soil across studies. Here, we use standard biochars with defined properties produced from softwood pellets (SWP) and rice husk (RH) at pyrolysis temperatures of 550 °C or 700 °C to test the effects of biochar amendment on microbial community composition and hydrocarbon degradation in soil microcosms contaminated with diesel oil. Combining this approach for the first time with specific analysis of microbial community composition using amplicon sequence variants (ASVs), we find that oil contamination causes extreme short-term loss of soil microbial diversity, and highly-specific selection of a limited set of genera defined by 13 ASVs. Biochar ameliorates the short-term loss of diversity, and in the longer term (9 weeks), changes community composition in a type-specific manner. The majority of the 13 selected ASVs are further enriched on biochar particles, although SWP biochars perform better than RH biochar in enrichment of putative hydrocarbonoclastic Aquabacterium spp. However, complete degradation of normal (n) alkanes from the aliphatic hydrocarbon fraction is prevented in the presence of biochar amendment, possibly due to their adsorption onto the char surface. Furthermore, we show that putative hydrocarbon degraders released from diesel-amended soil can subsequently be enriched to high levels on SWP biochar particles in growth medium supplemented with diesel oil as the sole carbon source; these include selected ASVs representing the genera Rhodococcus, Aquabacterium, and Cavicella. This work suggests that use of biochar pre-enriched with endogenous, conditionally-rare hydrocarbon degrading bacteria is a promising strategy for bioaugmentation of diesel-contaminated soils.

State-of-the-Art Char Production with a Focus on Bark Feedstocks: Processes, Design, and Applications

In recent years, there has been a surge of interest in char production from lignocellulosic biomass due to the fact of char’s interesting technological properties. Global char production in 2019 reached 53.6 million tons. Barks are among the most important and understudied lignocellulosic feedstocks that have a large potential for exploitation, given bark global production which is estimated to be as high as 400 million cubic meters per year. Chars can be produced from barks; however, in order to obtain the desired char yields and for simulation of the pyrolysis process, it is important to understand the differences between barks and woods and other lignocellulosic materials in addition to selecting a proper thermochemical method for bark-based char production. In this state-of-the-art review, after analyzing the main char production methods, barks were characterized for their chemical composition and compared with other important lignocellulosic materials. Following these steps, previous bark-based char production studies were analyzed, and different barks and process types were evaluated for the first time to guide future char production process designs based on bark feedstock. The dry and wet pyrolysis and gasification results of barks revealed that application of different particle sizes, heating rates, and solid residence times resulted in highly variable char yields between the temperature range of 220 °C and 600 °C. Bark-based char production should be primarily performed via a slow pyrolysis route, considering the superior surface properties of slow pyrolysis chars.

Infiltration properties of n-alkanes in mesoporous biochar: The capacity of smokeless support for stability and energy storage

Biochar, also named biocarbon, is a solid particulate material produced from the thermal decomposition of biomass at moderate temperatures. It has progressively become the topic of scientific interest in energy storage and conversion applications due to its affordability, environment friendliness, and structural tunability. In this study, biochar (obtained 600 °C pyrolysis) was introduced as phase change materials (PCMs) support. Three different n-alkanes (such as dodecane, tetradecane, and octadecane) are used as PCMs. The PCMs were infiltrated in the biochar network via the vacuum impregnation method. Among the biochar/n-alkane composites, one from octadecane exhibited a high latent heat storage capacity of 91.5 kJ/kg, 15.7 % and 25.9 % higher than that of dodecane and tetradecane-based composites, respectively. The molecular length of the PCMs and intermolecular interaction between the functional groups play an imperative role. The infiltration ratio of PCM in the biochar reached 50.1 % with improved thermal stability and chemical compatibility. This is attributed to the favorable morphological and structural properties (e.g., large BET surface area and mesopore structure) of the biochar that resides the n-alkanes found in the nanosized chain length. Hence, this report will lay a foundation for the application of biochars in thermal energy management systems.

Biochar Adsorbents with Enhanced Hydrophobicity for Oil Spill Removal

Oil spills cause massive loss of aquatic life. Oil spill cleanup can be very expensive, have secondary environmental impacts, or be difficult to implement. This study employed five different adsorbents: (1) commercially available byproduct Douglas fir biochar (BC) (SA ∼ 695 m²/g, pore volume ∼ 0.26 cm³/g, and pore diameter ∼ 13-19.5 Å); (2) BC modified with lauric acid (LBC); (3) iron oxide-modified biochar (MBC); (4) LBC modified with iron oxide (LMBC); and (5) MBC modified with lauric acid (MLBC) for oil recovery. Transmission, engine, machine, and crude oils were used to simulate oil spills and perform adsorption experiments. All five adsorbents adsorbed large quantities of each oil in fresh and simulated seawater with only a slight pH dependence, fast kinetics (sorptive equilibrium reached before 15 min), and high regression fits to the pseudo-second-order kinetic model. The Sips isotherm model oil sorption capacities for these sorbents were in the range ∼3-11 g oil/1 g adsorbent. Lauric acid-decorated (60-2 wt %) biochars gave higher oil adsorption capacities than the undecorated biochar. Lauric acid enhances biochar hydrophobicity and its water contact angle and reduces water influx into biochar's porosity preventing it from sinking in water for 3 weeks. These features were observed even at 2% wt of lauric acid (sinks only after 2 weeks). Magnetization by magnetite nanoparticle deposition onto BC and LBC allows the recovery of the exhausted adsorbent by a magnetic field as an alternative to filtration. Oil sorption was endothermic. Recycling was demonstrated after toluene stripping. The oil-laden adsorbents' heating values were obtained, suggesting an alternative use of these spent adsorbents as a low-cost fuel after recovery, avoiding waste disposal costs. The initial and oil-laden adsorbents were characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, Brunauer-Emmet-Teller surface area, contact angle, thermogravimetric analyses, differential scanning calorimetry, vibrating sample magnetometry, elemental analysis, and X-ray photoelectron spectroscopy.

Activated carbon biochar from municipal waste as a sorptive agent for the removal of polyaromatic hydrocarbons (PAHs), phenols and petroleum based compounds in contaminated liquids

Wastewater (WW) sludge cake is problematic to dispose of with treatment unable to remove organic pollutants. Typical disposal options include landfill or deposition on agricultural land, at considerable expense and environmental impact. Pyrolysis can recycle this waste to biochar however, additional unwanted organic pollutants are generated, differing in composition and volume according to the feedstock. These pollutants can be captured in solvent impingers or 'scrubbers' to avoid environmental release but lead to alternative waste. Both activated carbon and biochar are proven clean-up methods for organic pollutants with pine wood biochar showing changes in extraction selectivity with preparation temperature. Activated carbon biochar (ACB) from pine wood has also been successfully compared as a substitute at reduced cost and improved efficacy. To our knowledge, ACB from sludge cake has remained untested along with its application to clean-up solvent scrubbers. We have investigated this material from two WW treatment plants (UK and Ghana) as a sorbent, generated at 400 and 700 °C, to minimise contamination of liquids from pyrolysis and, petrochemicals in the event of a spill. This study confirmed the use and selective production of ACB for preferential clean-up of specific pollutants. Despite high temperature pine wood ACB proving most effective in removing petrochemical mixtures (>76%) extractions of equivalent repeatability and reasonable recovery were achieved with low temperature sludge cake ACB. This re-use of waste sludge cake offers improved thermochemical (recycling) and WW process efficiency, limiting the environmental impact and overall operational costs, minimising waste for disposal.

Can biochar and designer biochar be used to remediate per- and polyfluorinated alkyl substances (PFAS) and lead and antimony contaminated soils?

Designer biochars can be used to remediate organic and inorganic contaminant polluted soils. Here, a waste timber biochar (BC), a coconut shell activated biochar (aBC) and a wood shrub iron enriched designer biochar (Fe-BC) were investigated. Per- and polyfluorinated alkyl substances (PFAS) contaminated soils with different total organic carbon (TOC) contents (1.6 and 34.2%) were amended with six doses of BC and aBC. Two shooting range soils (TOC 5.2 and 10.2%) contaminated with heavy metals (mainly Pb and Sb) were amended with four doses of BC and Fe-BC. An amendment of 20% BC reduced the PFOS leachate concentration by 86% for the low TOC soil but was not effective for the high TOC soil. An amendment of 1% aBC reduced PFOS leachate concentrations by over >96% for both soils. For the low TOC shooting range soil, a 20% amendment of BC reduced Pb and Sb leaching by 61% and 12%, respectively. An amendment of 20% Fe-BC to soil with low TOC reduced Pb and Sb leaching by 99% and 40%, respectively. The need for "designer" biochars using processes such as iron enrichment or activation should be considered depending on the TOC of the soil, the type of contaminants and remediation goals.

Biochar as low-cost sorbent of volatile fuel organic compounds: potential application to water remediation

Pyrolysis of waste materials to produce biochar is an excellent and suitable alternative supporting a circular bio-based economy. One of the properties attributed to biochar is the capacity for sorbing organic contaminants, which is determined by its composition and physicochemical characteristics. In this study, the capacity of waste-derived biochar to retain volatile fuel organic compounds (benzene, toluene, ethylbenzene and xylene (BTEX) and fuel oxygenates (FO)) from artificially contaminated water was assessed using batch-based sorption experiments. Additionally, the sorption isotherms were established. The results showed significant differences between BTEX and FO sorption on biochar, being the most hydrophobic and non-polar contaminants those showing the highest retention. Furthermore, the sorption process reflected a multilayer behaviour and a relatively high sorption capacity of the biochar materials. Langmuir and Freundlich models were adequate to describe the experimental results and to detect general differences in the sorption behaviour of volatile fuel organic compounds. It was also observed that the feedstock material and biochar pyrolysis conditions had a significant influence in the sorption process. The highest sorption capacity was found in biochars produced at high temperature (> 400 °C) and thus rich in aromatic C, such as eucalyptus and corn cob biochars. Overall, waste-derived biochar offers a viable alternative to be used in the remediation of volatile fuel organic compounds from water due to its high sorption capacity.

Cost effective and practically viable oil spillage mitigation: Comprehensive study with biochar

Biochar is carbonaceous mass that is produced from pyrolysis or gasification of biomass. It is so far majorly explored for soil remediation application, but recently it has attracted a lot of interest because of its unexplored applications in the area of adsorption. In this work, detailed study on biochars produced from two different feeds (rice husk and saw dust), at two different temperatures (450 and 550°C) and two different rates (fast and slow) of pyrolysis are discussed for oil spill mitigation. Biochar is characterized in detail by various techniques such as FTIR, ¹³C CPMAS, FESEM, RAMAN, TGA to determine the structural composition and observe the extent of pyrolysis. Tests to assess the performance of produced biochars as sorbents for oil spill mitigation have been demonstrated. The as produced biochars selectively absorbed crude oil from oil/water biphasic mixtures in various capacities.