Fast urinary screening for paracetamol using on-line microwave assisted hydrolysis and spectrophotometric detection

Spectrophotometric flow injection procedure to indirect determination of paracetamol in pharmaceutical formulations using o-tolidine as reagent

A spectrophotometric flow injection method for the determination of paracetamol in pharmaceutical formulations is proposed. The procedure was based on the oxidation of paracetamol by sodium hypochloride and the determination of the excess of this oxidant using o-tolidine dichloride as chromogenic reagent at 430 nm. The analytical curve was linear in the paracetamol concentration range from 8.50 x 10-6 to 2.51 x 10-4 mol L-1 with a detection limit of 5.0 x 10-6 mol L-1. The relative standard deviation was smaller than 1.2% for 1.20 x 10-4 mol L-1 paracetamol solution (n = 10). The results obtained for paracetamol in pharmaceutical formulations using the proposed flow injection method and those obtained using a USP Pharmacopoeia method are in agreement at the 95% confidence level.

Simpler spectrophotometric assay of paracetamol in tablets and urine samples

A very fast, economical and simpler direct spectrophotometric method was investigated for paracetamol (PC) determination in aqueous medium without using any chemical reagents. The method is based on the photo-absorption of the analyte at 243 nm after dissolution in water. The change in structure of PC after addition of water was studied by comparing the corresponding FTIR spectra. Optimization studies were conducted by using a 5 microg ml(-1) standard solution of the analyte. Various parameters studied include, time for stability and measurement of spectra, effect of HCl, NaOH, CH(3)COOH and NH(3) for change in absorbance and shift in spectra, interference by some analgesic drugs and some polar solvents and temperature effect. After optimization, Beer's law was obeyed in the range of 0.3-20 microg ml(-1) PC solution with a correlation coefficient of 0.9999 and detection limit of 0.1 microg ml(-1). The newly developed method was successfully applied for PC determination in some locally available tablets and urine samples. The proposed method is very useful for quick analysis of various types of solid and liquid samples containing PC.

Modified tubular electrode in a multi-commutated flow system

This work describes the construction of a Nafion coated glassy carbon tubular electrode and its use, coupled to a multi-commutated flow system, for the voltammetric determination of acetaminophen in serum and pharmaceutical formulations. The modification of the electrode enhanced the analytical signal intensity and, simultaneously, prevented the electrode surface fouling. The multi-commutated system conferred high versatility to the manifold, allowing it to be easily adjusted to each determination without the need to introduce any physical reconfiguration. The on line enzymatic hydrolysis of acetaminophen, giving rise to 4-aminophenol, allowed the problem of interferences resulting from the oxidation of the matrix serum constituents to be overcome. The method presented a linear range up to 5.0 x 10(-4) mol l(-1) with a detection limit of 1.7 x 10(-5) mol l(-1), a sampling rate of 24 determinations per hour and a repeatability (expressed in relative standard deviation) always lower than 3%. The method was applied to serum samples and pharmaceutical formulations and no statistically significant difference between the results obtained by the proposed method and by the reference methods was found, for a confidence level of 95%.

Determination of paracetamol: historical evolution

Paracetamol is a common analgesic and antipyretic drug that is used for the relief of fever, headaches and other minor aches and pains. Their determination in pharmaceuticals is of paramount importance, since an overdose of paracetamol can cause fulminating hepatic necrosis and other toxic effects. Many analytical methodologies have been proposed for the determination of paracetamol. The aim of the present study is to evaluate the utility of different techniques for quantification of paracetamol content in pharmaceutical formulations and biological samples.

Spectrophotometric Determination of Paracetamol in Urine with Tetrahydroxycalix[4]arene as a Coupling Reagent and Preconcentration with Triton X-114 Using Cloud Point Extraction

In the present paper, conventional spectrophotometry in conjunction with cloud point extraction-preconcentration were investigated as alternative methods for paracetamol (PCT) assay in urine samples. Cloud point extraction (CPE) was employed for the preconcentration of p-aminophenol (PAP) prior to spectrophotometric determination using the non-ionic surfactant Triton X-114 (TX-114) as an extractant. The developed methods were based on acidic hydrolysis of PCT to PAP, which reacted at room temperature with 25,26,27,28-tetrahydroxycalix[4]arene (CAL4) in the presence of an oxidant (KIO(4)) to form an blue colored product. The PAP-CAL4 blue dye formed was subsequently entrapped in the surfactant micelles of Triton X-114. Cloud point phase separation with the aid of Triton X-114 induced by addition of Na(2)SO(4) solution was performed at room temperature as an advantage over other CPE assays requiring elevated temperatures. The 580 nm-absorbance maximum of the formed product was shifted bathochromically to 590 nm with CPE. The working range of 1.5-12 microg ml(-1) achieved by conventional spectrophotometry was reduced down to 0.14-1.5 microg ml(-1) with cloud point extraction, which was lower than those of most literature flow-through assays that also suffer from nonspecific absorption in the UV region. By preconcentrating 10 ml sample solution, a detection limit as low as 40.0 ng ml(-1) was obtained after a single-step extraction, achieving a preconcentration factor of 10. The stoichiometric composition of the dye was found to be 1 : 4 (PAP : CAL4). The impact of a number of parameters such as concentrations of CAL4, KIO(4), Triton X-100 (TX-100), and TX-114, extraction temperature, time periods for incubation and centrifugation, and sample volume were investigated in detail. The determination of PAP in the presence of paracetamol in micellar systems under these conditions is limited. The established procedures were successfully adopted for the determination of PCT in urine samples. Since the drug is rapidly absorbed and excreted largely in urine and its high doses have been associated with lethal hepatic necrosis and renal failure, development of a rapid, sensitive and selective assay of PCT is of vital importance for fast urinary screening and antidote administration before applying more sophisticated, but costly and laborious hyphenated instrumental techniques of HPLC-SPE-NMR-MS.

Spectrophotometric determination of paracetamol with microwave assisted alkaline hydrolysis

A novel and rapid spectrophotometric method for the determination of paracetamol is proposed in this paper. The proposed method is based on the microwave assisted alkaline hydrolysis of paracetamol to p-aminophenol that reacts with S2- in the presence of Fe3+ as oxidant to produce a methylene blue-like dye having an absorptivity maximum at 540 nm. The experiment showed that paracetamol could be hydrolysed quantitatively to p-aminophenol in only 1.5 min under radiation power 640 W using a microwave in NaOH medium. The system obeys Beer's law in the range of 0-3.0 x 10(-4) mol l(-1) paracetamol. The molar absorptivity and Sandell's sensitivity were found to be 3.2 x 10(-3) l mol(-1) cm(-1) and 0.047 microg cm(-2), respectively. The relative standard deviation (n=11) was 1.7% for 8.0 x 10(-5) mol l(-1) paracetamol. The method has been applied successfully to analysis of paracetamol in pharmaceutical preparation.

Development of the second-order derivative UV spectrophotometric method for direct determination of paracetamol in urine intended for biopharmaceutical characterisation of drug products

Paracetamol is a widely used nonsalicylate analgesic and antipyretic drug. The existing methods for the determination of paracetamol in biological fluids are mainly HPLC techniques, although there are some reported methods based on spectrophotometric determinations. However, all these methods involve some extraction or derivatisation procedures. In the present study the UV spectra of investigated samples were recorded over the wavelength range 220-400 nm (lambda step 0.21 nm; scan speed 60 nm/min) and second-order derivative spectra were calculated. Second-order derivative spectra of different blank urine samples displayed the presence of a zero-crossing point at 245-247 nm defined as lambdazc. The zero-order absorption spectra of paracetamol in water displays maximum absorbance at 243 nm, while in second derivative spectra, a minimum peak at 246 nm was observed. Therefore, the application of zero-crossing technique to the second-derivative UV absorption spectrum should be useful for the determination of paracetamol using 2Dlambdazc. The proposed method enables determination of total paracetamol in urine directly and simply by reading the 2Dlambdazc of the diluted samples. The obtained results were in good accordance with published data on cumulative urinary excretion after per oral administration of paracetamol obtained applying different spectrophotometric methods of determination. It could be useful for biopharmaceutical characterisation of drug products (monitoring of the levels of paracetamol in urine in bioavailability testing, for the evaluation of in vitro-in vivo correlation and screening of different formulations during drug product development).