Determination of diphenylamine stabilizer and its nitrated derivatives in smokeless gunpowder using a tandem MS method

A feasibility study of direct analysis in real time-mass spectrometry for screening organic gunshot residues from various substrates

This study reports the use of direct analysis in real time-mass spectrometry (DART-MS) for the detection of organic gunshot residues (OGSR) in a variety of matrices of interest for forensics, customs, and homeland security. Detection limits ranged from (0.075 to 12) ng, with intra- and inter-day reproducibility below 0.0012% CV. The collection of mass spectra at multiple in-source collision-induced dissociation (is-CID) voltages produced distinctive mass spectral signatures with varying levels of fragmentation and allowed differentiation of isomers. To test method performance, a collection of 330 authentic specimens from various substrates were analyzed - (1) neat smokeless powders, (2) spent cartridge cases, (3) burnt particles removed from clothing via carbon stubs or (4) with tweezers, and hand samples from (5) non-shooters, and (6) shooters. A subset of hand specimens (n = 80) was further analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) for confirmation and comparison. Seven types of ammunition from five manufacturers and two calibers were monitored for OGSR profiles with similar compositions observed for paired sets (e.g., unburnt smokeless powder and the respective residues on spent cartridges, clothing, and hands). No false positives were observed across all datasets. A 100% true positive rate (TPR) was observed for all substrates except the shooters' hands. Depending on the ammunition type and classification criteria, the shooters' hands exhibited a TPR ranging from 19% to 73%. The results show that DART-MS is feasible and versatile for fast screening of OGSR across various substrates but may benefit from alternative approaches to improve detection at trace levels.

Chemical Analysis of Gunpowder and Gunshot Residues

The identification of firearms is of paramount importance for investigating crimes involving firearms, as it establishes the link between a particular firearm and firearm-related elements found at a crime scene, such as projectiles and cartridge cases. This identification relies on the visual comparison of such elements against reference samples from suspect firearms or those existing in databases. Whenever this approach is not possible, the chemical analysis of the gunpowder and gunshot residue can provide additional information that may assist in establishing a link between samples retrieved at a crime scene and those from a suspect or in the identification of the corresponding model and manufacturer of the ammunition used. The most commonly used method for the chemical analysis of gunshot residue is scanning electron microscopy with energy dispersive X-ray, which focuses on the inorganic elements present in ammunition formulation, particularly heavy metals. However, a change in the legal paradigm is pushing changes in these formulations to remove heavy metals due to their potential for environmental contamination and the health hazards they represent. For this reason, the importance of the analysis of organic compounds is leading to the adoption of a different set of analytical methodologies, mostly based on spectroscopy and chromatography. This manuscript reviews the constitution of primer and gunpowder formulations and the analytical methods currently used for detecting, characterising, and identifying their compounds. In addition, this contribution also explores how the information provided by these methodologies can be used in ammunition identification and how it is driving the development of novel applications within forensic ballistics.

Vapor Signatures of Double-Base Smokeless Powders and Gunshot Residues for Supporting Canine Odor Imprinting

Non-intrusive means to detect concealed firearms based on magnetometry are widely accepted and employed worldwide. Explosive detection canines can also detect concealed firearms provided that they are imprinted on materials that may be related to firearms such as nitroglycerin in double-base smokeless powders. However, there are hundreds of possible smokeless powder formulations across various manufacturers, presenting a challenge for trained canines to generalize across all possible powder compositions. In response, this paper reports a set of potential imprinting vapor(s) that may help detection canines generalize across a variety of double-base smokeless powders and gunshot residues. Statistical analysis was conducted on the smokeless powder database maintained by the National Center for Forensic Science, and headspace measurements targeting nitroglycerin and diphenylamine were collected from several powders. In addition, measurements were taken to track nitroglycerin and diphenylamine vapor concentration changes over time on the spent casings and gun barrels of four types of ammunition. The observed vapor concentration mixing ratios for nitroglycerin and diphenylamine from residues were in the part-per-billion to part-per-trillion range, which would be challenging to detect for many field-deployed explosive vapor detectors and indicate continued importance of canines for forensic investigation and crime prevention. Analyses suggest four potential vapor compositions for imprinting. For unburnt powders, 90% nitroglycerin and 10% diphenylamine appear adequate for most powders, and 90% dinitrotoluene and 10% diphenylamine is a possible candidate to increase generalization to powders that contain dinitrotoluene instead of nitroglycerin. 100% nitroglycerin appears adequate for many gunshot residues (GSRs). Diphenylamine may be present in some GSRs, and equal compositions of nitroglycerin and diphenylamine may be adequate for imprinting against these residues as they age (this study tracked signatures up to 7 weeks after discharge).

Magnetic nanoparticle modified electrodes for voltammetric determination of propellant stabiliser diphenylamine

The overall aim of the work was to advance electrochemical devices capable of analysis of forensically relevant residues using rapid electrochemical sensor technology. In order to achieve this, electrochemical detection of the propellant stabiliser diphenylamine (DPA) was achieved via voltammetry with signal enhancement realised in the presence of iron oxide nanoparticle modified transducers. This allowed both mechanistic and analytical evaluation with the aim to achieve the required selectivity and sensitivity for reliable detection. DPA electrochemistry was examined at glassy carbon electrodes in aqueous (3:7 methanol: sodium acetate pH 4.3) electrolyte via potential sweeping, with an irreversible wave at E_p = 0.67 V vs. Ag/AgCl. The diffusion coefficient (D) for the oxidation process was calculated as 1.43 × 10^-6 cm² s^-1 with αn_a = 0.7. DPA electrochemistry in a non aqueous methanol/acetonitrile electrolyte resulted in a D value of 5.47 × 10^-8 cm² s^-1 with αn_a = 0.5. Electrochemical preparation of magnetic iron oxide nanoparticles was achieved via electrooxidation of an iron anode in the presence of an amine surfactant followed by characterisation with SEM/EDX, XRD, FTIR and thermal analysis. A surface confined layer of these magnetic nanoparticles served to positively influence the response to DPA while impeding formation of surface confined oxidation products, with generation of an improved analytical signal - sensitivity 1.13× 10^-3 A cm^-2 mM^-1 relative to bare electrode response (9.80 × 10^-4 A cm^-2 mM^-1) over the range 0.5-50 μM DPA using differential pulse voltammetry, with LOD 3.51 × 10^-6 M and LOQ 1.17 × 10^-5 M. Real sample analysis involved recovery and differential pulse voltammetry of unburnt and burnt gunshot residue with DPA qualitative and quantitative analysis.

Use of micro, capillary, and nano liquid chromatography for forensic analysis

The use of micro, capillary, and nano liquid chromatography systems for forensic analysis has excellent potential. In a field where sample size is often limited, several studies have presented the viability of capillary columns with microflow and nanoflow, and when using mass spectrometric analysis limits of detection can be improved. Reduction in flow rates result in significant reduction in operating costs. Recent advances in miniaturized liquid chromatography systems also aim at in-laboratory and on-site detection, which have already been applied to forensic drug cases. This critical review will discuss the advantages, disadvantages, and applicability of microflow and nano liquid chromatography. In this regard, included in this article is a discussion of some promising areas not yet applied to forensic research.

Armed with the Facts: A Method for the Analysis of Smokeless Powders by Ambient Mass Spectrometry

The work presented here follows several others in investigating what capabilities, if any, ambient mass spectrometry might have toward the analysis of compounds commonly associated with smokeless propellant powders. This family of instrumental techniques has attracted curiosity from the field of forensic science due to its desirable properties such as rapid collection of information-rich data, combined with minimal requirements for sample mass and preparation. Experiments were conducted with a "Direct Sample Analysis" ion source integrated with a time-of-flight mass spectrometer. The ionization behaviors of nitroglycerin, methyl and ethyl centralite, akardite, diphenylamine, nitrosodiphenylamine, and nitrated diphenylamine derivatives were investigated specifically, with accurate-mass data presented for each. Diphenylamine standards were used to demonstrate the performance of this instrument, which exhibited good response linearity across 1 order of magnitude and sub-nanogram detection limits. Thirty smokeless powder extracts, recovered from ammunition potentially in circulation within Australia, were analyzed to determine whether the technique is appropriate for rapid analysis of smokeless powder particles. Results demonstrated that the technique might be applied to compare individual particles with each other or to a database. Such a capability may be of value in the examination of explosive devices containing smokeless powder, postblast residues therefrom, or muzzle discharge from a close-range shooting. However, when efforts were made to detect residues from the hands of a volunteer shooter, only some returned positive results, and a high background signal from the sample collection stub indicates that detection using this instrument is thus far insufficiently reliable.

Simple sonochemical synthesis of lanthanum tungstate (La2(WO4)3) nanoparticles as an enhanced electrocatalyst for the selective electrochemical determination of anti-scald-inhibitor diphenylamine

In this work, lanthanum tungstate (La₂(WO₄)₃) nanoparticles (NPs) were synthesized by facile sonochemical method (elmasonic P, under-sonication 37/100 kHz, ~60 W energy) and utilized as an electrode material for the selective and sensitive electrochemical determination of anti-scald inhibitor diphenylamine (DPA). The synthesized La₂(WO₄)₃ NPs were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDAX), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) analyses. The results revealed that the sonochemically synthesized La₂(WO₄)₃ nanoparticles were with high crystallinity and uniformly distributed nanoparticles like structure. The as-prepared lanthanum tungstate NPs exhibited an excellent electrocatalytic behavior for DPA determination with the lowest detection limit of 0.0024 µM, wide linear range response of 0.01-58.06 µM and a remarkable sensitivity of 1.021 µA µM^-1 cm^-2. Furthermore, La₂(WO₄)₃ NPs showed a good recovery to DPA in apple juice sample. Besides, the electrochemical mechanism of the DPA oxidation reaction was provided in detail.

Applications of Direct Injection Soft Chemical Ionisation-Mass Spectrometry for the Detection of Pre-blast Smokeless Powder Organic Additives

Analysis of smokeless powders is of interest from forensics and security perspectives. This article reports the detection of smokeless powder organic additives (in their pre-detonation condition), namely the stabiliser diphenylamine and its derivatives 2-nitrodiphenylamine and 4-nitrodiphenylamine, and the additives (used both as stabilisers and plasticisers) methyl centralite and ethyl centralite, by means of swab sampling followed by thermal desorption and direct injection soft chemical ionisation-mass spectrometry. Investigations on the product ions resulting from the reactions of the reagent ions H₃O⁺ and O₂⁺ with additives as a function of reduced electric field are reported. The method was comprehensively evaluated in terms of linearity, sensitivity and precision. For H₃O⁺, the limits of detection (LoD) are in the range of 41-88 pg of additive, for which the accuracy varied between 1.5 and 3.2%, precision varied between 3.7 and 7.3% and linearity showed R² ≥ 0.9991. For O₂⁺, LoD are in the range of 72 to 1.4 ng, with an accuracy of between 2.8 and 4.9% and a precision between 4.5 and 8.6% and R² ≥ 0.9914. The validated methodology was applied to the analysis of commercial pre-blast gun powders from different manufacturers. Graphical Abstract.

Estimating Diphenylamine in Gunshot Residues from a New Tool for Identifying both Inorganic and Organic Residues in the Same Sample

A method involving the collection and determination of organic and inorganic gunshot residues on hands using on-line in-tube solid-phase microextraction (IT-SPME) coupled to miniaturized capillary liquid chromatography with diode array detection (CapLC-DAD) and scanning electron microscopy coupled to energy dispersion X-ray (SEM-EDX), respectively, for quantifying both residues was developed. The best extraction efficiency for diphenylamine (DPA) as the main target among organic residues was achieved by using a dry cotton swab followed by vortex-assisted extraction with water, which permits preservation of inorganic residues. Factors such as the nature and length of the IT-SPME extractive phase and volume of the sample processed were investigated and optimized to achieve high sensitivity: 90 cm of TRB-35 (35% diphenyl, 65% polydimethylsiloxane) capillary column and 1.8 mL of the processed sample were selected for the IT-SPME. Satisfactory limit of detection of the method for analysis of DPA deposited on shooters’ hands (0.3 ng) and precision (intra-day relative standard deviation, 9%) were obtained. The utility of the described approach was tested by analyzing several samples of shooters’ hands. Diphenylamine was found in 81% of the samples analyzed. Inorganic gunshot residues analyzed by SEM-EDX were also studied in cotton swab and lift tape kit samplers. Optical microscopy was used to see the inorganic gunshot residues in the cotton swab samplers. The lift tape kits provided lesser sensitivity for DPA than dry cotton swabs—around fourteen times. The possibility of environmental and occupational sources could be eliminated when DPA was found together with inorganic residues. Then, the presence of inorganic and organic residues in a given sample could be used as evidence in judicial proceedings in the forensic field.

Electrochemical sensing of free radical antioxidant diphenylamine cations (DPAH˙+) with carbon interlaced nanoflake-assembled MgxNi9−xS8 microspheres

The detection and control of free radical antioxidant diphenylamine cations (DPAH˙⁺), a typical organic industrial waste water byproduct, is important for environmental safety and protection.

Novel molecularly imprinted polymer based on β-cyclodextrin@graphene oxide: Synthesis and application for selective diphenylamine determination

A sensitive and selective molecularly imprinted polymer (MIP) for the determination of diphenylamine (DPA) was developed based on host-guest interactions of a cyclodextrin-based polymer which possesses an inherent affinity for the target. The proposed GO@MIP has been prepared using the graphene oxide (GO) sheets as surface of polymerization, DPA as target molecule, β-cyclodextrin (β-CD) and acrylamide (AM) as functional monomers, azobisisobutyronitrile (AIBN) as initiator and N, N methylene bisacrylamide (MBAm) as crosslinker which denoted as GO@MIP nanocomposite. The MIP sites were formed by the inclusion complex through interaction of DPA and β-CD, followed by extraction of target. The resulting GO@MIP nanocomposite possess a fast adsorption kinetics, highly improved imprinting effect, high adsorption capacity, and it can be applied to fast extraction of DPA. The resultant GO@MIP nanocomposite was characterized using the Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) scanning electron microscope (SEM) and energy-dispersive spectroscopy (EDS) analysis. On the other hand, the non-imprinted polymer (GO@NIP nanocomposite) has been synthesized and was used in the adsorption experiments. The MIP exhibited good affinity with a maximum adsorption capacity of 95.98mgg^-1 and excellent selectivity toward DPA than other structural analogues such as 2-amino benzophenone and dithizone.

Charge Separation and Catalytic Activity of Fe3 O4 @Ag "Nanospheres"

Nanospheres of Ag-coated Fe3 O4 were successfully synthesized and characterized. Photocatalytic properties of Fe3 O4 @Ag composites have been investigated using steady-state studies and laser pulse excitations. Accumulation of the electrons in the Ag shell was detected from the shift in the surface plasmon band from 430 to 405 nm, which was discharged when an electron acceptor such as O2 , Thionine (TH) or C60 was introduced into the system. Charge equilibration with redox couple such as C60 (●-) /C60 indicated the ability of these core-shell structures to carry out photocatalytic reduction reactions. As well, outer Ag layer could boost charge separation in magnetic core through dual effects of Schottky junction and localized surface plasmonic resonance (LSPR)-powered band gap breaking effect under sunlight irradiation; resulted in higher photocatalytic degradation of diphenylamine (DPA). The maximum photocatalytic degradation rate was achieved at optimum amount of Ag-NP loading to products. Adsorption studies confirmed that degradation of DPA dominantly occurred in solution. Moderately renewability of the nanocatalysts under sunlight was due to oxidation and dissolution of the outer Ag layer.

Skin permeation of organic gunshot residue: implications for sampling and analysis

Traditional gunshot residue (GSR) analysis is based on detection of particulates formed from metals found in the primer. Recent concerns regarding the interpretation of GSR evidence has led to interest in alternatives such as the organic constituents (organic gunshot residue, OGSR) found in propellants. Previous work has shown OGSR to be detectable on hands for several hours after a firing event, and given the lipophilic nature of these compounds, it was expected that losses due to secondary transfer (an issue with GSR particulates) would be negligible. However, other loss mechanisms have been identified, specifically skin permeation and evaporation. This paper describes experimental and modeling studies used to elucidate characteristics of skin permeation of 5 compounds present in OGSR. Pharmaceutical methods were adapted to characterize skin permeation using a skin surrogate and Franz diffusion cells. The amount of compounds deposited on skin after an authentic firing event (1 and 2 shots) was experimentally determined and applied for the permeation experiments. A fully validated selected ion monitoring GC/MS method was developed for quantitative analysis, and easily accessible online tools were employed for modeling. Results showed that OGSR residues should be detectable on skin for many hours after a firing event of as few as one or two shots, with detection capability being a function of the efficacy of sampling and sample preparation and the instrumental method employed. The permeation rates of the OGSR compounds were sufficiently different to suggest the potential to develop methods to approximate time-since-deposition.

Detection of gunshot residues using mass spectrometry

In recent years, forensic scientists have become increasingly interested in the detection and interpretation of organic gunshot residues (OGSR) due to the increasing use of lead- and heavy metal-free ammunition. This has also been prompted by the identification of gunshot residue- (GSR-) like particles in environmental and occupational samples. Various techniques have been investigated for their ability to detect OGSR. Mass spectrometry (MS) coupled to a chromatographic system is a powerful tool due to its high selectivity and sensitivity. Further, modern MS instruments can detect and identify a number of explosives and additives which may require different ionization techniques. Finally, MS has been applied to the analysis of both OGSR and inorganic gunshot residue (IGSR), although the "gold standard" for analysis is scanning electron microscopy with energy dispersive X-ray microscopy (SEM-EDX). This review presents an overview of the technical attributes of currently available MS and ionization techniques and their reported applications to GSR analysis.

A fast liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QToF-MS) method for the identification of organic explosives and propellants

A fast, highly specific and sensitive method for the detection of an extensive list of organic explosives and propellants using an optimised Liquid Chromatography Quadrupole Time-of-Flight Mass Spectrometry (LC-QToF-MS) procedure has been developed. Analyte specific information including retention time, adduct accurate mass and fragmentation data was firstly collected using both positive and negative ion Atmospheric Pressure Chemical Ionisation (APCI) and entered into a Personal Compound Database/Library (PCDL). The custom PCDL can then be used to screen any sample for the presence of organic explosives and propellants, generating a match score for any identified compounds. To date over 50 organic explosives and propellants have been characterised and entered into the database representing those likely to be encountered in forensic and environmental samples and also a range of specialist explosives.

Analysis of gunshot residue and associated materials--a review

A comprehensive review of the scientific literature on gunshot residue (GSR) is presented. Aspects of both inorganic and organic GSR are discussed, from formation and distribution, to sample collection, preparation, and analysis using a variety of techniques. The interpretation of GSR results is also considered including issues surrounding the contamination, distribution, and transfer of GSR. Potential problems with ulterior sources of GSR like particles have been reported in the literature. For example, particles from environmental and occupational sources have been highlighted as exhibiting similar chemical and morphological characteristics to GSR. These findings are put into context with regard to interpreting samples. A move toward a "case by case" approach is argued to be more preferable to a "formal" classification system where possible. The analysis of both inorganic and organic compositions of residue samples as well as morphological considerations is considered to be a more ideal approach to GSR analysis, wherever practicable.

Degradation of diphenylamine by persulfate: Performance optimization, kinetics and mechanism

The degradation of diphenylamine (DPA) in aqueous solution by persulfate is investigated. Effects of pH, persulfate concentration, ionic strength, temperature and catalytic ions Fe(3+) and Ag(+) on the degradation efficiency of DPA by persulfate are examined in batch experiments. The degradation of DPA by persulfate is found to follow the pseudo-first-order kinetic model. Increasing the reaction temperature or persulfate concentration may significantly accelerate the DPA degradation. Fe(3+) and Ag(+) ions can enhance the degradation of DPA, and Ag(+) ion is more efficient than Fe(3+) ion. However, the increase of either the pH value or ionic strength will decrease the rate of DPA degradation. N-Phenyl-4-quinoneimine, N-carboxyl-4-quinoneimine, 4-quinoneimine and oxalic acid are identified as the major intermediates of DPA degradation, and a primary pathway for the degradation of DPA is proposed. The degradation of DPA in surface water, groundwater and seawater is also tested by persulfate, and more than 90% of DPA can be degraded at room temperature in 45min at an initial concentration of 20mgL(-1).

Fluorescence Characteristics of Some Dehydroabietic Acid-Based Arylamines

Absorption spectra and fluorescence data in nonpolar solvents are reported for seven novel dehydroabietic acid-based diarylamines, which have potential as components of hole transport layers for molecular electronic devices. This bulky group has been found to improve the possibilities for film formation of these compounds, and in this study we show that this does not significantly affect their fluorescence characteristics, which are similar to diphenylamine.

Development of a Quantitative LC-MS/MS Method for the Analysis of Common Propellant Powder Stabilizers in Gunshot Residue

In traditional scanning electron microscopy/energy dispersive X-ray analysis of gunshot residue (GSR), one has to cope more and more frequently with limitations of this technique due to the use of lead-free ammunition or ammunition lacking heavy metals. New methods for the analysis of the organic components of common propellant powder stabilizers were developed based on liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). A multiple reactions monitoring scanning method was created for the screening of akardite II, ethylcentralite, diphenylamine, methylcentralite, N-nitrosodiphenylamine, 2-nitrodiphenylamine, and 4-nitrodiphenylamine, present in standards mixtures. Five out of seven of these target compounds can be selectively identified and distinguished from the two others with a high accuracy. Samples from the hands of a shooter were collected by swabbing and underwent solid phase extraction prior to analysis. Detection limits ranging from 5 to 115 mug injected were achieved. Results from several firing trials show that the LC-MS/MS method is suitable for the detection of stabilizers in samples collected following the firing of 9 mm Para ammunitions.

Detection of gunpowder stabilizers with ion mobility spectrometry

This study is the first reported ion mobility detection of ethyl centralite and diphenylamine (DPA) smokeless gunpowder stabilizers, together with the nitroso and nitro derivatives of diphenylamine. First, the applicability of the ion mobility spectrometry (IMS) for the substances of interest was determined. The existence of numerous peaks, both in positive and negative modes, clearly demonstrates the success of these experiments. All mono and di-nitro derivatives of DPA tested were detected with this method. Unfortunately, many of the ions generated were not accurately identified. However, reduced mobility constants representative of each ion generated under defined operating conditions could be used for purpose of compound identification. The method was then successfully tested on real gunpowder samples. By the use of IMS, we managed to establish a rapid, simple and sensitive screening method for the detection and identification of smokeless gunpowder organic components.

Characterization of gunpowder samples using time-of-flight secondary ion mass spectrometry (TOF-SIMS)

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) was utilized to obtain characteristic mass spectra from three different smokeless powders and six different black powder samples. In these mass spectra, peaks indicative of both the organic and inorganic additive constituents in the gunpowders were observed. TOF-SIMS was able to successfully differentiate between the different black and smokeless gunpowder samples analyzed with the aid of principal components analysis (PCA), a multivariate statistical analysis approach often used to reduce the dimensionality of complex data. TOF-SIMS was also used to obtain information about the spatial distribution of the various additives contained within the gunpowder samples. SIMS imaging demonstrated that that the samples could potentially be characterized by their 2-D structure, which varied from sample to sample. These results clearly demonstrate the feasibility of utilizing TOF-SIMS as a tool for the characterization and differentiation of gunpowder samples for general forensic applications.

Mobile phase influence on electrospray ionization for the analysis of smokeless powders by gradient reversed phase high-performance liquid chromatography-ESIMS

The solution parameters associated with gradient elution reversed phase high-performance liquid chromatography (HPLC) were characterized by evaluating the electrospray ionization mass spectrometry (ESIMS) response of selected smokeless powder additives. Using direct liquid infusion, the positive ion ESIMS responses were determined for three general classes of powder constituents: dialkylphthalate acid esters, N,N'-dialkyl-N,N'-diphenyl urea based stabilizers and nitroso-, nitro-, and dinitro- derivatives of diphenylamine. The relative ESIMS intensities of the powder components were investigated as a function of three solution parameters: ammonium acetate concentration, pH, and percent methanol. The effect of the ammonium acetate concentration demonstrates that the electrolyte is required for efficient ionization and the ESIMS intensity was optimal at a concentration of 2mM for the selected compounds, except 2,4'-dinitrodiphenylamine. The aqueous solution pH, corresponding to the available protons in solution, did not have a significant effect on the ESIMS intensity of the analytes. The percent methanol was evaluated with both decreasing and constant electrolyte concentrations to demonstrate the effects of droplet stability and ion transfer into the gas phase. These findings were applied to the analysis of the selected smokeless powder additives using HPLC-ESIMS to illustrate increased sensitivity for the protonated molecules.

Diphenylamine and derivatives in the environment: a review

Diphenylamine (DPA) is a compound from the third European Union (EU) list of priority pollutants. It was assigned by the EU to Germany to assess and control its environmental risks. DPA and derivatives are most commonly used as stabilizers in nitrocellulose-containing explosives and propellants, in the perfumery, and as antioxidants in the rubber and elastomer industry. DPA is also widely used to prevent post-harvest deterioration of apple and pear crops. DPA is a parent compound of many derivatives, which are used for the production of dyes, pharmaceuticals, photography chemicals and further small-scale applications. Diphenylamines are still produced worldwide by the chemical industries. First reports showed that DPA was found in soil and groundwater. Some ecotoxicological studies demonstrated the potential hazard of various diphenylamines to the aquatic environment and to bacteria and animals. Studies on the biodegradability of DPA and its derivatives are very sparse. Therefore, further investigation is required to determine the complete dimension of the potential environmental hazard and to introduce possible (bio)remediation techniques for sites that are contaminated with this class of compounds. This is the first detailed review on DPA and some derivatives summarizing their environmental relevance as it is published in the literature so far and this review will recommend conducting further research in the future.

Gradient reversed-phase liquid chromatographic-electrospray ionization mass spectrometric method for the comparison of smokeless powders

A gradient reversed-phase liquid chromatographic-electrospray ionization mass spectrometric (LC-ESIMS) method was developed to determine compositional variation in the organic additives of smokeless powders. The method was optimized for the separation and detection of selected powder constituents, including diphenylamine, along with isomers of its nitroso and nitro derivatives, centralite I and II, in addition to dialkylphthalate acid esters. A series of commercially available smokeless powders was prepared by organic liquid extraction and characterized using the LC-ESIMS method. The results demonstrate the differentiation of smokeless powders by their additive profile.