Recent advances in biologically sensitive field-effect transistors (BioFETs)

Addressing Signal Drift and Screening for Detection of Biomarkers with Carbon Nanotube Transistors

Electrical biosensors, including transistor-based devices (i.e., BioFETs), have the potential to offer versatile biomarker detection in a simple, low-cost, scalable, and point-of-care manner. Semiconducting carbon nanotubes (CNTs) are among the most explored nanomaterial candidates for BioFETs due to their high electrical sensitivity and compatibility with diverse fabrication approaches. However, when operating in solutions at biologically relevant ionic strengths, CNT-based BioFETs suffer from debilitating levels of signal drift and charge screening, which are often unaccounted for or sidestepped (but not addressed) by testing in diluted solutions. In this work, we present an ultrasensitive CNT-based BioFET called the D4-TFT, an immunoassay with an electrical readout, which overcomes charge screening and drift-related limitations of BioFETs. In high ionic strength solution (1X PBS), the D4-TFT repeatedly and stably detects subfemtomolar biomarker concentrations in a point-of-care form factor by increasing the sensing distance in solution (Debye length) and mitigating signal drift effects. Debye length screening and biofouling effects are overcome using a poly(ethylene glycol)-like polymer brush interface (POEGMA) above the device into which antibodies are printed. Simultaneous testing of a control device having no antibodies printed over the CNT channel confirms successful detection of the target biomarker via an on-current shift caused by antibody sandwich formation. Drift in the target signal is mitigated by a combination of: (1) maximizing sensitivity by appropriate passivation alongside the polymer brush coating; (2) using a stable electrical testing configuration; and (3) enforcing a rigorous testing methodology that relies on infrequent DC sweeps rather than static or AC measurements. These improvements are realized in a relatively simple device using printed CNTs and antibodies for a low-cost, versatile platform for the ongoing pursuit of point-of-care BioFETs.

Aptamer-Based Switching System for Communication of Non-Interacting Proteins

Biological macromolecules, such as DNA, RNA, and proteins in living organisms, form an intricate network that plays a key role in many biological processes. Many attempts have been made to build new networks by connecting non-communicable proteins with network mediators, especially using antibodies. In this study, we devised an aptamer-based switching system that enables communication between non-interacting proteins. As a proof of concept, two proteins, Cas13a and T7 RNA polymerase (T7 RNAP), were rationally connected using an aptamer that specifically binds to T7 RNAP. The proposed switching system can be modulated in both signal-on and signal-off manners and its responsiveness to the target activator can be controlled by adjusting the reaction time. This study paves the way for the expansion of biological networks by mediating interactions between proteins using aptamers.

Alzheimer's Disease Biomarker Detection Using Field Effect Transistor-Based Biosensor

Alzheimer's disease (AD) is closely related to neurodegeneration, leading to dementia and cognitive impairment, especially in people aged > 65 years old. The detection of biomarkers plays a pivotal role in the diagnosis and treatment of AD, particularly at the onset stage. Field-effect transistor (FET)-based sensors are emerging devices that have drawn considerable attention due to their crucial ability to recognize various biomarkers at ultra-low concentrations. Thus, FET is broadly manipulated for AD biomarker detection. In this review, an overview of typical FET features and their operational mechanisms is described in detail. In addition, a summary of AD biomarker detection and the applicability of FET biosensors in this research field are outlined and discussed. Furthermore, the trends and future prospects of FET devices in AD diagnostic applications are also discussed.

Synthesis of a Au/Au NPs-PPy/l-CYs/ZIF-8 nanocomposite electrode for voltammetric determination of insulin in human blood

In this work, a modified electrode named Au/Au NPs-PPy/l-CYs/ZIF-8 was designed and built and simultaneously doped into electropolymerized polypyrrole (PPy) film using cyclic voltammetry (CV). Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectroscopy (EIS), and CV were used to characterize the composite films. The PPy-(ZIF-8) modified Au electrode was used to determine insulin using Square-Wave Voltammetry (SWV). It was found that the prepared zeolitic imidazolate framework-8 had excellent electrocatalytic activity towards insulin oxidation due to its unique properties. The oxidation peak current of insulin hormone increased with its concentration in the range from 1.0 to 60 nM with the linear regression equation: Ipa = 0.3421C (nM) + 3.2762 (γ = 0.998). The measurement limit was estimated to be 1 nM. While the common coexisting substances showed no interference in the response of the modified electrode to insulin, the modified electrode indicated reproducible behavior and a high level of stability during the experiments. The advantages of using these nanocomposites on the surface of modified electrodes include increased stability, good interaction between the analyte and the modified electrode, conductivity, and excellent performance due to the nanometer size of the composites. As a result, it may be particularly suitable for analytical purposes.

Interfacing Biology and Electronics with Memristive Materials

Memristive technologies promise to have a large impact on modern electronics, particularly in the areas of reconfigurable computing and artificial intelligence (AI) hardware. Meanwhile, the evolution of memristive materials alongside the technological progress is opening application perspectives also in the biomedical field, particularly for implantable and lab-on-a-chip devices where advanced sensing technologies generate a large amount of data. Memristive devices are emerging as bioelectronic links merging biosensing with computation, acting as physical processors of analog signals or in the framework of advanced digital computing architectures. Recent developments in the processing of electrical neural signals, as well as on transduction and processing of chemical biomarkers of neural and endocrine functions, are reviewed. It is concluded with a critical perspective on the future applicability of memristive devices as pivotal building blocks in bio-AI fusion concepts and bionic schemes.

Large-scale nano-biosensing technologies

Nanoscale technologies have brought significant advancements to modern diagnostics, enabling unprecedented bio-chemical sensitivities that are key to disease monitoring. At the same time, miniaturized biosensors and their integration across large areas enabled tessellating these into high-density biosensing panels, a key capability for the development of high throughput monitoring: multiple patients as well as multiple analytes per patient. This review provides a critical overview of various nanoscale biosensing technologies and their ability to unlock high testing throughput without compromising detection resilience. We report on the challenges and opportunities each technology presents along this direction and present a detailed analysis on the prospects of both commercially available and emerging biosensing technologies.

Application of Two-Dimensional Materials towards CMOS-Integrated Gas Sensors

During the last few decades, the microelectronics industry has actively been investigating the potential for the functional integration of semiconductor-based devices beyond digital logic and memory, which includes RF and analog circuits, biochips, and sensors, on the same chip. In the case of gas sensor integration, it is necessary that future devices can be manufactured using a fabrication technology which is also compatible with the processes applied to digital logic transistors. This will likely involve adopting the mature complementary metal oxide semiconductor (CMOS) fabrication technique or a technique which is compatible with CMOS due to the inherent low costs, scalability, and potential for mass production that this technology provides. While chemiresistive semiconductor metal oxide (SMO) gas sensors have been the principal semiconductor-based gas sensor technology investigated in the past, resulting in their eventual commercialization, they need high-temperature operation to provide sufficient energies for the surface chemical reactions essential for the molecular detection of gases in the ambient. Therefore, the integration of a microheater in a MEMS structure is a requirement, which can be quite complex. This is, therefore, undesirable and room temperature, or at least near-room temperature, solutions are readily being investigated and sought after. Room-temperature SMO operation has been achieved using UV illumination, but this further complicates CMOS integration. Recent studies suggest that two-dimensional (2D) materials may offer a solution to this problem since they have a high likelihood for integration with sophisticated CMOS fabrication while also providing a high sensitivity towards a plethora of gases of interest, even at room temperature. This review discusses many types of promising 2D materials which show high potential for integration as channel materials for digital logic field effect transistors (FETs) as well as chemiresistive and FET-based sensing films, due to the presence of a sufficiently wide band gap. This excludes graphene from this review, while recent achievements in gas sensing with graphene oxide, reduced graphene oxide, transition metal dichalcogenides (TMDs), phosphorene, and MXenes are examined.

Biosensors for detection of prostate cancer: a review

Diagnosis of prostate cancer (PC) has posed a challenge worldwide due to the sophisticated and costly diagnostics tools, which include DRE, TRUS, GSU, PET/CT scan, MRI, and biopsy. These diagnostic techniques are very helpful in the detection of PCs; however, all the techniques have their serious limitations. Biosensors are easier to fabricate and do not require any cutting-edge technology as required for other imaging techniques. In this regard, point-of-care (POC) biosensors are important due to their portability, convenience, low cost, and fast procedure. This review explains the various existing diagnostic tools for the detection of PCs and the limitation of these methods. It also focuses on the recent studies on biosensors technologies as an alternative to the conventional diagnostic techniques for the detection of PCs.

Technical Perspectives on Applications of Biologically Coupled Gate Field-Effect Transistors

Biosensing technologies are required for point-of-care testing (POCT). We determine some physical parameters such as molecular charge and mass, redox potential, and reflective index for measuring biological phenomena. Among such technologies, biologically coupled gate field-effect transistor (Bio-FET) sensors are a promising candidate as a type of potentiometric biosensor for the POCT because they enable the direct detection of ionic and biomolecular charges in a miniaturized device. However, we need to reconsider some technical issues of Bio-FET sensors to expand their possible use for biosensing in the future. In this perspective, the technical issues of Bio-FET sensors are pointed out, focusing on the shielding effect, pH signals, and unique parameters of FETs for biosensing. Moreover, other attractive features of Bio-FET sensors are described in this perspective, such as the integration and the semiconductive materials used for the Bio-FET sensors.

Field-Effect Transistor-Based Biosensors for Environmental and Agricultural Monitoring

The precise monitoring of environmental contaminants and agricultural plant stress factors, respectively responsible for damages to our ecosystems and crop losses, has nowadays become a topic of uttermost importance. This is also highlighted by the recent introduction of the so-called "Sustainable Development Goals" of the United Nations, which aim at reducing pollutants while implementing more sustainable food production practices, leading to a reduced impact on all ecosystems. In this context, the standard methods currently used in these fields represent a sub-optimal solution, being expensive, laboratory-based techniques, and typically requiring trained personnel with high expertise. Recent advances in both biotechnology and material science have led to the emergence of new sensing (and biosensing) technologies, enabling low-cost, precise, and real-time detection. An especially interesting category of biosensors is represented by field-effect transistor-based biosensors (bio-FETs), which enable the possibility of performing in situ, continuous, selective, and sensitive measurements of a wide palette of different parameters of interest. Furthermore, bio-FETs offer the possibility of being fabricated using innovative and sustainable materials, employing various device configurations, each customized for a specific application. In the specific field of environmental and agricultural monitoring, the exploitation of these devices is particularly attractive as it paves the way to early detection and intervention strategies useful to limit, or even completely avoid negative outcomes (such as diseases to animals or ecosystems losses). This review focuses exactly on bio-FETs for environmental and agricultural monitoring, highlighting the recent and most relevant studies. First, bio-FET technology is introduced, followed by a detailed description of the the most commonly employed configurations, the available device fabrication techniques, as well as the specific materials and recognition elements. Then, examples of studies employing bio-FETs for environmental and agricultural monitoring are presented, highlighting in detail advantages and disadvantages of available examples. Finally, in the discussion, the major challenges to be overcome (e.g., short device lifetime, small sensitivity and selectivity in complex media) are critically presented. Despite the current limitations and challenges, this review clearly shows that bio-FETs are extremely promising for new and disruptive innovations in these areas and others.

State of the Art of Chemosensors in a Biomedical Context

Healthcare is undergoing large transformations, and it is imperative to leverage new technologies to support the advent of personalized medicine and disease prevention. It is now well accepted that the levels of certain biological molecules found in blood and other bodily fluids, as well as in exhaled breath, are an indication of the onset of many human diseases and reflect the health status of the person. Blood, urine, sweat, or saliva biomarkers can therefore serve in early diagnosis of diseases such as cancer, but also in monitoring disease progression, detecting metabolic disfunctions, and predicting response to a given therapy. For most point-of-care sensors, the requirement that patients themselves can use and apply them is crucial not only regarding the diagnostic part, but also at the sample collection level. This has stimulated the development of such diagnostic approaches for the non-invasive analysis of disease-relevant analytes. Considering these timely efforts, this review article focuses on novel, sensitive, and selective sensing systems for the detection of different endogenous target biomarkers in bodily fluids as well as in exhaled breath, which are associated with human diseases.

Two-Dimensional Field-Effect Transistor Sensors: The Road toward Commercialization

The evolutionary success in information technology has been sustained by the rapid growth of sensor technology. Recently, advances in sensor technology have promoted the ambitious requirement to build intelligent systems that can be controlled by external stimuli along with independent operation, adaptivity, and low energy expenditure. Among various sensing techniques, field-effect transistors (FETs) with channels made of two-dimensional (2D) materials attract increasing attention for advantages such as label-free detection, fast response, easy operation, and capability of integration. With atomic thickness, 2D materials restrict the carrier flow within the material surface and expose it directly to the external environment, leading to efficient signal acquisition and conversion. This review summarizes the latest advances of 2D-materials-based FET (2D FET) sensors in a comprehensive manner that contains the material, operating principles, fabrication technologies, proof-of-concept applications, and prototypes. First, a brief description of the background and fundamentals is provided. The subsequent contents summarize physical, chemical, and biological 2D FET sensors and their applications. Then, we highlight the challenges of their commercialization and discuss corresponding solution techniques. The following section presents a systematic survey of recent progress in developing commercial prototypes. Lastly, we summarize the long-standing efforts and prospective future development of 2D FET-based sensing systems toward commercialization.

A new approach towards the Debye length challenge for specific and label-free biological sensing based on field-effect transistors

Biologically-modified field-effect transistors (BioFETs) are promising platforms for specific and label-free biosensing due to their sub-micron footprint suitable for multiplexing in ultra-small samples, low noise levels, inherent amplification, etc. Debye screening length is a well-recognized challenge for any BioFET-based technology. The screening length is the smallest at the double layer, where the solution ion population is higher than the bulk population. One way to address the small double layer screening length is to electrostatically modify the potential drop across the solution such as to minimize the potential drop over the double layer. This will decrease the population of the double layer ions and increase the screening length. However, this is not possible with BioFETs as voltage application to the reference electrode simultaneously affects both the double layer and the BioFET conducting channel. The current study addresses the screening length challenge with the novel Meta-Nano-Channel (MNC) BioFET. The MNC BioFET, which is fabricated in a complementary-metal-oxide-silicon (CMOS) process, allows decoupling of the electrostatics of the double layer from the electrodynamics of the conducting channel. The study explores the mechanism of sensing with the MNC BioFET, and demonstrates how the double layer can be electrostatically tuned in order to optimize the screening length without affecting the conducting channel. Finally, specific and label-free sensing of 10 ng ml^-1 prostate specific antigen (PSA) is demonstrated. It is shown that by electrostatically increasing the double layer screening length, the sensing signal increases from 70 mV to 133 mV.

Differential pulse voltammetry and chronoamperometry as analytical tools for epinephrine detection using a tyrosinase-based electrochemical biosensor

The main goal of the presented study was to design a biosensor-based system for epinephrine (EP) detection using a poly-thiophene derivative and tyrosinase as a biorecognition element. We compared two different electroanalytical techniques to select the most prominent technique for analyzing the neurotransmitter. The prepared biosensor system exhibited good parameters; the differential pulse (DPV) technique presented a wide linear range (1–20 μM and 30–200 μM), with a low detection limit (0.18 nM and 1.03 nM). In the case of chronoamperometry (CA), a high signal-to-noise ratio and lower reproducibility were observed, causing a less broad linear range (10–200 μM) and a higher detection limit (125 nM). Therefore, the DPV technique was used for the calculation of sensitivity (0.0011 μA mM⁻¹ cm⁻²), stability (49 days), and total surface coverage (4.18 × 10⁻¹² mol cm⁻²). The biosensor also showed very high selectivity in the presence of common interfering species (i.e. ascorbic acid, uric acid, norepinephrine, dopamine) and was successfully applied for EP determination in a pharmaceutical sample.

GCE/poly-4,4′-bBT/tyrosinase biosensor for epinephrine was constructed. Comparison of differential pulse voltammetry (DPV) and chronoamperometry was performed. DPV showed more reproducible results giving high selectivity, sensitivity, stability.

Chemically Induced pH Perturbations for Analyzing Biological Barriers Using Ion-Sensitive Field-Effect Transistors

Potentiometric pH measurements have long been used for the bioanalysis of biofluids, tissues, and cells. A glass pH electrode and ion-sensitive field-effect transistor (ISFET) can measure the time course of pH changes in a microenvironment as a result of physiological and biological activities. However, the signal interpretation of passive pH sensing is difficult because many biological activities influence the spatiotemporal distribution of pH in the microenvironment. Moreover, time course measurement suffers from stability because of gradual drifts in signaling. To address these issues, an active method of pH sensing was developed for the analysis of the cell barrier in vitro. The microenvironmental pH is temporarily perturbed by introducing a low concentration of weak acid (NH₄⁺) or base (CH₃COO⁻) to cells cultured on the gate insulator of ISFET using a superfusion system. Considering the pH perturbation originates from the semi-permeability of lipid bilayer plasma membranes, induced proton dynamics are used for analyzing the biomembrane barriers against ions and hydrated species following interaction with exogenous reagents. The unique feature of the method is the sensitivity to the formation of transmembrane pores as small as a proton (H⁺), enabling the analysis of cell–nanomaterial interactions at the molecular level. The new modality of cell analysis using ISFET is expected to be applied to nanomedicine, drug screening, and tissue engineering.

Fabrication, Characterization, and Modeling of an Aluminum Oxide-Gate Ion-Sensitive Field-Effect Transistor-Based pH Sensor

The ion-sensitive field-effect transistor (ISFET) is a popular technology utilized for pH sensing applications. In this work, we have presented the fabrication, characterization, and electrochemical modeling of an aluminum oxide (Al₂O₃)-gate ISFET-based pH sensor. The sensor is fabricated using well-established metal-oxide-semiconductor (MOS) unit processes with five steps of photolithography, and the sensing film is patterned using the lift-off process. The Al₂O₃ sensing film is deposited over the gate area using pulsed-DC magnetron-assisted reactive sputtering technique in order to improve the sensor performance. The material characterization of sensing film has been done using x-ray diffraction, field-emission scanning electron microscopy, energy-dispersive spectroscopy, and x-ray photoelectron spectroscopy techniques. The sensor has been packaged using thick-film technology and encapsulated by a dam-and-fill approach. The packaged device has been tested in various pH buffer solutions, and a sensitivity of nearly 42.1 mV/pH has been achieved. A simulation program with integrated circuit emphasis (SPICE) macromodel of the Al₂O₃-gate ISFET is empirically derived from the experimental results, and the extracted electrochemical parameters have been reported. The drift and hysteresis characteristics of the Al₂O₃-gate ISFET were also studied, and the obtained drift rates for different pH buffer solutions of 4, 7, and 10 are 0.136 μA/min, 0.124 μA/min, and 0.108 μA/min, respectively. A hysteresis of nearly 5.806 μA has been obtained. The developed sensor has high sensitivity along with low drift and hysteresis.

Graphene and carbon nanotubes interfaced electrochemical nanobiosensors for the detection of SARS-CoV-2 (COVID-19) and other respiratory viral infections: A review

Recent COVID-19 pandemic has claimed millions of lives due to lack of a rapid diagnostic tool. Global scientific community is now making joint efforts on developing rapid and accurate diagnostic tools for early detection of viral infections to preventing future outbreaks. Conventional diagnostic methods for virus detection are expensive and time consuming. There is an immediate requirement for a sensitive, reliable, rapid and easy-to-use Point-of-Care (PoC) diagnostic technology. Electrochemical biosensors have the potential to fulfill these requirements, but they are less sensitive for sensing viruses/viral infections. However, sensitivity and performance of these electrochemical platforms can be improved by integrating carbon nanostructure, such as graphene and carbon nanotubes (CNTs). These nanostructures offer excellent electrical property, biocompatibility, chemical stability, mechanical strength and, large surface area that are most desired in developing PoC diagnostic tools for detecting viral infections with speed, sensitivity, and cost-effectiveness. This review summarizes recent advancements made toward integrating graphene/CNTs nanostructures and their surface modifications useful for developing new generation of electrochemical nanobiosensors for detecting viral infections. The review also provides prospects and considerations for extending the graphene/CNTs based electrochemical transducers into portable and wearable PoC tools that can be useful in preventing future outbreaks and pandemics.

Multiplexed all-solid-state ion-sensitive light-addressable potentiometric sensor (ISLAPS) system based on silicone-rubber for physiological ions detection

Light-addressable potentiometric sensor (LAPS) has been widely used in biomedical applications since its advent. As a member of the potentiometric sensors, ion-sensitive LAPS (ISLAPS) can be obtained by modifying ion selective sensing membrane on the sensor surface. Compared with the conventional ion-selective electrodes (ISEs) with liquid contact, the all-solid-state ISEs have more advantages such as easy maintenance, more convenient for miniaturization and practical applications. However, the commonly used ion-sensitive membrane (ISM) matrix like PVC has many limitations such as poor adhesion to silicone-based sensor and easy overflow of the plasticizer from the membrane. In this work, LAPS was combined with a variety of ionophore-doped all-solid-state silicone-rubber ISMs for the first time, to establish a program-controlled multiplexed ISLAPS system for physiological ions (Na⁺, K⁺, Ca²⁺ and H⁺) detection. The silicone-rubber ISMs have better adhesion to silicon-based sensors without containing plasticizers, which can avoid the plasticizer pollution and improve the long-term stability. A layer of poly(3-octylthiophene-2,5-diyl) (P3OT) was pre-modified on the sensor surface to inhibit the formation of an aqueous layer and improve the sensor lifetime. With the aid of a translation stage, the light spot automatically illuminated the detection sites in sequence, and the response of the four ions could be obtained in one measurement within 1 min. The proposed multiplexed ISLAPS has good sensitivity with micromolar limit of detection (LOD), good selectivity and long-term stability (more than 3 months). The results of the real Dulbecco's Modified Eagle Medium (DMEM) sample detection proved that the ISLAPS system can be used for the physiological ions detection, and is promising to realize a multi-parameter microphysiometer.

CuO Nanoparticles Decorated ZnO Nanorods Based Extended-Gate Field-Effect-Transistor (EGFET) for Enzyme-Free Glucose Sensing Application

In this work, CuO nanoparticles (NPs) decorated zinc oxide nanorods (ZnO NRs) on fluorine-doped tin oxide (FTO) substrate has been used as a working electrode. This working electrode has been used as an extended gate for field-effect transistor. The main objective is to use the EGFET (extended gate field effect transistor) as a glucose sensor. The proposed glucose sensor has good sensitivity of 6.643 mV/mM with a wide range of linearity (1mM-8mM) which covers the glucose level of human blood ranging from 4.4 mM to 6.6 mM. This novel concept of the glucose sensing using CuO NPs decorated ZnO nanorods based EGFET may be explored for sensing other saccharides such as mannose, fructose, and sucrose. This vertically grown ZnO nanorods decorated with CuO NPs based electrode gives reliable selectivity, good repeatability, and more stability. The performance of proposed sensor is also compared with commercially available glucose sensors. The sensitivity performance of the glucose sensor also confirms the capability to detect the glucose level from human blood and serum.

Evolution of Supramolecular Systems Towards Next-Generation Biosensors

Supramolecular materials, which rely on dynamic non-covalent interactions, present a promising approach to advance the capabilities of currently available biosensors. The weak interactions between supramolecular monomers allow for adaptivity and responsiveness of supramolecular or self-assembling systems to external stimuli. In many cases, these characteristics improve the performance of recognition units, reporters, or signal transducers of biosensors. The facile methods for preparing supramolecular materials also allow for straightforward ways to combine them with other functional materials and create multicomponent sensors. To date, biosensors with supramolecular components are capable of not only detecting target analytes based on known ligand affinity or specific host-guest interactions, but can also be used for more complex structural detection such as chiral sensing. In this Review, we discuss the advancements in the area of biosensors, with a particular highlight on the designs of supramolecular materials employed in analytical applications over the years. We will first describe how different types of supramolecular components are currently used as recognition or reporter units for biosensors. The working mechanisms of detection and signal transduction by supramolecular systems will be presented, as well as the important hierarchical characteristics from the monomers to assemblies that contribute to selectivity and sensitivity. We will then examine how supramolecular materials are currently integrated in different types of biosensing platforms. Emerging trends and perspectives will be outlined, specifically for exploring new design and platforms that may bring supramolecular sensors a step closer towards practical use for multiplexed or differential sensing, higher throughput operations, real-time monitoring, reporting of biological function, as well as for environmental studies.

Solution-Gated Ultrathin Channel Indium Tin Oxide-Based Field-Effect Transistor Fabricated by a One-Step Procedure that Enables High-Performance Ion Sensing and Biosensing

In this paper, we propose a one-step procedure for fabricating a solution-gated ultrathin channel indium tin oxide (ITO)-based field-effect transistor (FET) biosensor, thus providing an ″all-by-ITO″ technology. A thin-film sheet was placed on both ends of a metal shadow mask, which were contacted with a glass substrate. That is, the bottom of the metal shadow mask corresponding to the channel was slightly raised from the substrate, resulting in the creeping of some particles into the gap during sputtering. Owing to this modified metal shadow mask, a thin ITO channel (<30-40 nm) and thick ITO source/drain electrodes (ca. 100 nm) were simultaneously fabricated during the one-step sputtering. The thickness of ITO films was critical for them to be semiconductive, depending on the maximum depletion width (∼30-40 nm for the ITO channel), similarly to 2D materials. The ultrathin ITO channel worked as an ion-sensitive membrane as well owing to the intrinsic oxidated surface directly contacting with an electrolyte solution. The solution-gated 20-nm-thick channel ITO-based FET, with a steep subthreshold slope (SS) of 55 mV/dec (pH 7.41) attributable to the electric double-layer capacitance at the electrolyte solution/channel interface and the absence of interfacial traps among electrodes formed in one step, demonstrated an ideal pH responsivity (∼56 mV/pH), resulting in the real-time monitoring of cellular respiration and the long-term stability of electrical properties for 1 month. Moreover, the chemical modification of the ITO channel surface is expected to contribute to biomolecular recognition with ultrahigh sensitivity owing to the remarkably steep SS, which provided the exponential pH sensitivity in the subthreshold regime. Our new device produced in this one-step manner has a great future potential in bioelectronics.

Ionic contrast across a lipid membrane for Debye length extension: towards an ultimate bioelectronic transducer

Despite technological advances in biomolecule detections, evaluation of molecular interactions via potentiometric devices under ion-enriched solutions has remained a long-standing problem. To avoid severe performance degradation of bioelectronics by ionic screening effects, we cover probe surfaces of field effect transistors with a single film of the supported lipid bilayer, and realize respectable potentiometric signals from receptor-ligand bindings irrespective of ionic strength of bulky solutions by placing an ion-free water layer underneath the supported lipid bilayer. High-energy X-ray reflectometry together with the circuit analysis and molecular dynamics simulation discovered biochemical findings that effective electrical signals dominantly originated from the sub-nanoscale conformational change of lipids in the course of receptor-ligand bindings. Beyond thorough analysis on the underlying mechanism at the molecular level, the proposed supported lipid bilayer-field effect transistor platform ensures the world-record level of sensitivity in molecular detection with excellent reproducibility regardless of molecular charges and environmental ionic conditions.

Hydrogel facilitated bioelectronic integration

The recent advances in bio-integratable electronics are creating new opportunities for investigating and directing biologically significant processes, yet their performance to date is still limited by the inherent physiochemical and signaling mismatches at the heterogeneous interfaces. Hydrogels represent a unique category of materials to bridge the gap between biological and electronic systems because of their structural/functional similarity to biological tissues and design versatility to accommodate cross-system communication. In this review, we discuss the latest progress in the engineering of hydrogel interfaces for bioelectronics development that promotes (1) structural compatibility, where the mechanical and chemical properties of hydrogels can be modulated to achieve coherent, chronically stable biotic-abiotic junctions; and (2) interfacial signal transduction, where the charge and mass transport within the hydrogel mediators can be rationally programmed to condition/amplify the bioderived signals and enhance the electrical/electrochemical coupling. We will further discuss the application of functional hydrogels in complex physiological environments for bioelectronic integration across different scales/biological levels. These ongoing research efforts have the potential to blur the distinction between living systems and artificial electronics, and ultimately decode and regulate biological functioning for both fundamental inquiries and biomedical applications.

A review of BioFET's basic principles and materials for biomedical applications

Interest in biomolecular sensors for diagnosis of early diseases and prognosis of the diseases is increasing day by day. Among them, FET-based sensors are very useful in that of their versatile operating characteristics using various materials. Herein, after addressing the basic principles of BioFET, we conduct an overall review of BioFET on two of the main structural elements: transducing materials and probes. Transducing materials were classified into graphene, carbon nanotube, silicon, MOF, etc., and probes were classified into antibodies, enzymes, aptamers, etc.. The important elements in designing BioFETs, such as electrical properties of each material, Debye length, and fabrication process are introduced along with their respective structures and materials. After the review of each of these structures and characteristics, examples are discussed along with sensitivity, selectivity, and limit of detection. In addition to the operating aspects of the senser, novel processes, treatments, and materials that can be considered for various purposes are also introduced. Based on the understanding, an overview of diverse examples is given by dividing the applications of BioFET into three main types: antigen sensing, biomarker sensing, and drug effect monitoring. Focusing on these general reviews, we conclude how the future direction of development will move forward and what the main challenge is.

Optimal field-effect transistor operation for high-resolution biochemical measurements

Field-effect transistors (FETs) are powerful tools for sensitive measurements of numerous biomarkers (e.g., proteins, nucleic acids, and antigen) and gaseous species. Most research studies in this field focused on building discrete devices with high performance. We show that instrumentation that is commonly used in multiple areas of physics and engineering can greatly improve the performance of measurement systems that embed FET-based transducers for biological applications. We review the state-of-the-art instrumentation in the field as applied to sensing with FETs. We show how high-performance dual-gate 2D FETs that we recently developed, when operated using closed-loop proportional-integral-derivative control, can drastically improve both the sensitivity and resolution. We further show that this closed-loop control approach can be extended to commonly used single-gate silicon FETs. The generalizability of the results will allow their application to virtually any previously developed FET-based sensor. Finally, we provide insight into further optimization and performance benefits that can be extracted by using the closed-loop feedback approach for applications in biosensing.

Solid State Sensors for Hydrogen Peroxide Detection

Hydrogen peroxide (H2O2) is a key molecule in numerous physiological, industrial, and environmental processes. H2O2 is monitored using various methods like colorimetry, luminescence, fluorescence, and electrochemical methods. Here, we aim to provide a comprehensive review of solid state sensors to monitor H2O2. The review covers three categories of sensors: chemiresistive, conductometric, and field effect transistors. A brief description of the sensing mechanisms of these sensors has been provided. All three sensor types are evaluated based on the sensing parameters like sensitivity, limit of detection, measuring range and response time. We highlight those sensors which have advanced the field by using innovative materials or sensor fabrication techniques. Finally, we discuss the limitations of current solid state sensors and the future directions for research and development in this exciting area.

Recent advances in bioelectronics chemistry

Research in bioelectronics is highly interdisciplinary, with many new developments being based on techniques from across the physical and life sciences. Advances in our understanding of the fundamental chemistry underlying the materials used in bioelectronic applications have been a crucial component of many recent discoveries. In this review, we highlight ways in which a chemistry-oriented perspective may facilitate novel and deep insights into both the fundamental scientific understanding and the design of materials, which can in turn tune the functionality and biocompatibility of bioelectronic devices. We provide an in-depth examination of several developments in the field, organized by the chemical properties of the materials. We conclude by surveying how some of the latest major topics of chemical research may be further integrated with bioelectronics.

Graphene field-effect transistors as bioanalytical sensors: design, operation and performance

Graphene field-effect transistors (GFETs) are emerging as bioanalytical sensors, in which their responsive electrical conductance is used to perform quantitative analyses of biologically-relevant molecules such as DNA, proteins, ions and small molecules. This review provides a detailed evaluation of reported approaches in the design, operation and performance assessment of GFET biosensors. We first dissect key design elements of these devices, along with most common approaches for their fabrication. We compare possible modes of operation of GFETs as sensors, including transfer curves, output curves and time series as well as their integration in real-time or a posteriori protocols. Finally, we review performance metrics reported for the detection and quantification of bioanalytes, and discuss limitations and best practices to optimize the use of GFETs as bioanalytical sensors.

Detecting DNA and RNA and Differentiating Single-Nucleotide Variations via Field-Effect Transistors

We detect short oligonucleotides and distinguish between sequences that differ by a single base, using label-free, electronic field-effect transistors (FETs). Our sensing platform utilizes ultrathin-film indium oxide FETs chemically functionalized with single-stranded DNA (ssDNA). The ssDNA-functionalized semiconducting channels in FETs detect fully complementary DNA sequences and differentiate these sequences from those having different types and locations of single base-pair mismatches. Changes in charge associated with surface-bound ssDNA vs double-stranded DNA (dsDNA) alter FET channel conductance to enable detection due to differences in DNA duplex stability. We illustrate the capability of ssDNA-FETs to detect complementary RNA sequences and to distinguish from RNA sequences with single nucleotide variations. The development and implementation of electronic biosensors that rapidly and sensitively detect and differentiate oligonucleotides present new opportunities in the fields of disease diagnostics and precision medicine.

Biocompatible and flexible paper-based metal electrode for potentiometric wearable wireless biosensing

A paper-based electrode is a very attractive component for a disposable, nontoxic, and flexible biosensor. In particular, wearable biosensors, which have recently been attracting interest, not only require these characteristics of paper-based electrodes but must also be able to detect various ions and biomolecules in biological fluids. In this paper, we demonstrate the detection ability of paper-based metal electrodes for wearable biosensors as part of a wireless potentiometric measurement system, focusing on the detection of pH and sodium ions. The paper-based metal electrodes were obtained by simply coating a silicone-rubber-coated paper sheet with a Au (/Cr) thin film by sputtering then modifying it with different functional membranes such as an oxide membrane (Ta₂O₅) and a fluoropolysilicone (FPS)-based Na⁺-sensitive membrane, corresponding to the targeted ions. Satisfactory and stable detection sensitivities of the modified paper-based Au electrodes were obtained over several weeks even when they were bent to a radius of curvature in the range of 6.5 to 25 mm, assuming use in a flexible body patch biosensor. Moreover, the Na⁺ concentration in a sweat sample was evaluated using the paper-based Au electrode with the FPS-based Na⁺-sensitive membrane in a wireless and real-time manner while the electrode was bent. Thus, owing to their complex mesh structure, flexible paper sheets should be suitable for use as potentiometric electrodes for wearable wireless biosensors.

ISFET and Dex-AgNPs based portable sensor for reusable and real-time determinations of concanavalin A and glucose on smartphone

In this paper, a portable real-time sensing device was built for Concanavalin A (Con A) and glucose detection using a smartphone. The ion-sensitive field-effect transistor (ISFET) functioning at a low working point was selected as a small-size, low-power transducer, and dextran-capped silver nanoparticles (Dex-AgNPs) served as sensitive nanoprobes on the ISFET gate. Using the affinity between Con A and carbohydrates, Con A can be captured, and thus directly detected by the ISFET/Dex-AgNPs unit; then glucose can be determined indirectly by removing Con A from the ISFET/Dex-AgNPs/Con A unit via competition with dextran. The mechanism of this competition does less harm to the sensor, allows the reusability of the sensing device, and overcomes the Debye screening of the FET device in saline solutions. Powered by a button cell, the handheld device attains excellent Con A (0.16 ng mL^-1) and glucose (10 nM) detection limit, and can practically be used for at least 20 days.

Detecting Protein-Ligand Interaction from Integrated Transient Induced Molecular Electronic Signal (i-TIMES)

Quantitative information about protein-ligand interactions is central to drug discovery. To obtain the quintessential reaction dissociation constant, ideally measurements of reactions should be performed without perturbations by molecular labeling or immobilization. The technique of transient induced molecular electrical signal (TIMES) has provided a promising technique to meet such requirements, and its performance in a microfluidic environment further offers the potential for high throughput and reduced consumption of reagents. In this work, we further the development by using integrated TIMES signal (i-TIMES) to greatly enhance the accuracy and reproducibility of the measurement. While the transient response may be of interest, the integrated signal directly measures the total amount of surface charge density resulted from molecules near the surface of electrode. The signals enable quantitative characterization of protein-ligand interactions. We have demonstrated the feasibility of i-TIMES technique using different biomolecules including lysozyme, N,N',N″-triacetylchitotriose (TriNAG), aptamer, p-aminobenzamidine (pABA), bovine pancreatic ribonuclease A (RNaseA), and uridine-3'-phosphate (3'UMP). The results show i-TIMES is a simple and accurate technique that can bring tremendous value to drug discovery and research of intermolecular interactions.

Electrostatically Governed Debye Screening Length at the Solution-Solid Interface for Biosensing Applications

Biosensors based on field-effect devices (bioFETs) offer numerous advantages over current technologies and therefore have attracted immense research over the decades. However, short Debye screening length in highly ionic physiological solutions remains the main obstacle for bioFET realization. This challenge becomes considerably more acute at the electrolyte-oxide interface of the sensing area due to high ion concentration induced by the charged amphoteric sites, which prohibits any attempt to employ the field-effect mechanism to "sense" any charged biomolecules. In this work, we present an electrostatic approach by which the double layer (DL) excess ion concentration is removed, thus forcing the DL ion concentration to match the bulk concentration, which subsequently forces bulk screening length at the DL, thereby "exposing" target biomolecules to the underlying bioFET. To this end, we employ local tunable surface electric fields, introduced to the DL using surface passivated-metal electrodes. We examine numerically and analytically the effect of these electric fields on the DL ion distribution. We also numerically demonstrate the feasibility of the proposed approach for a fully depleted silicon-on-insulator based bioFET and show how the threshold voltage shift induced by the presence of target molecules increases by almost two orders of magnitude upon the removal of the surface excess ion population.

Fabrication and Plasma Modification of Nanofibrous Tissue Engineering Scaffolds

This paper provides a comprehensive overview of nanofibrous structures for tissue engineering purposes and the role of non-thermal plasma technology (NTP) within this field. Special attention is first given to nanofiber fabrication strategies, including thermally-induced phase separation, molecular self-assembly, and electrospinning, highlighting their strengths, weaknesses, and potentials. The review then continues to discuss the biodegradable polyesters typically employed for nanofiber fabrication, while the primary focus lies on their applicability and limitations. From thereon, the reader is introduced to the concept of NTP and its application in plasma-assisted surface modification of nanofibrous scaffolds. The final part of the review discusses the available literature on NTP-modified nanofibers looking at the impact of plasma activation and polymerization treatments on nanofiber wettability, surface chemistry, cell adhesion/proliferation and protein grafting. As such, this review provides a complete introduction into NTP-modified nanofibers, while aiming to address the current unexplored potentials left within the field.

Phenylalanine Monitoring via Aptamer-Field-Effect Transistor Sensors

Determination of the amino acid phenylalanine is important for lifelong disease management in patients with phenylketonuria, a genetic disorder in which phenylalanine accumulates and persists at levels that alter brain development and cause permanent neurological damage and cognitive dysfunction. Recent approaches for treating phenylketonuria focus on injectable medications that efficiently break down phenylalanine but sometimes result in detrimentally low phenylalanine levels. We have identified new DNA aptamers for phenylalanine in two formats, initially as fluorescent sensors and then, incorporated with field-effect transistors (FETs). Aptamer-FET sensors detected phenylalanine over a wide range of concentrations (fM to mM). para-Chlorophenylalanine, which inhibits the enzyme that converts phenylalanine to tyrosine, was used to induce hyperphenylalaninemia during brain development in mice. Aptamer-FET sensors were specific for phenylalanine versus para-chlorophenylalanine and differentiated changes in mouse serum phenylalanine at levels expected in patients. Aptamer-FETs can be used to investigate models of hyperphenylalanemia in the presence of structurally related enzyme inhibitors, as well as naturally occurring amino acids. Nucleic acid-based receptors that discriminate phenylalanine analogs, some that differ by a single substituent, indicate a refined ability to identify aptamers with binding pockets tailored for high affinity and specificity. Aptamers of this type integrated into FETs enable rapid, electronic, label-free phenylalanine sensing.

Deoxyribonucleic-acid-sensitive Polycrystalline Diamond Solution-gate Field-effect Transistor with a Carboxyl-terminated Boron-doped Channel

This paper describes a deoxyribonucleic-acid-sensitive electrolyte solution-gate field-effect transistor (SGFET) sensor utilizing a partial carboxyl-terminated boron-doped polycrystalline diamond surface as a linker to connect a deoxyribonucleic acid (DNA) probe. A high density of carboxyl termination on the polycrystalline diamond surface that was employed as a FET channel was achieved using a vacuum ultraviolet system with oxygen gas. A single-stranded DNA probe was immobilized on the polycrystalline diamond channel via amino coupling. The current-voltage characteristics of the polycrystalline diamond SGFET sensor was examined with bias voltages within its potential voltage window. The characteristics of the drain-source current verses the drain-source voltage showed a pinch-off, a shift voltage of up to 40 mV with a coefficient of variation of 4 - 11% was obtained between hybridization and denaturation. In addition, a single nucleotide mutation of DNA sequence was selectively recognized by the shift voltage up to ca. 10 mV.

Molecular-Charge-Contact-Based Ion-Sensitive Field-Effect Transistor Sensor in Microfluidic System for Protein Sensing

In this paper, we demonstrate the possibility of direct protein sensing beyond the Debye length limit using a molecular-charge-contact (MCC)-based ion-sensitive field-effect transistor (ISFET) sensor combined with a microfluidic device. Different from the MCC method previously reported, biotin-coated magnetic beads are set on the gate insulator of an ISFET using a button magnet before the injection of target molecules such as streptavidin. Then, the streptavidin—a biotin interaction, used as a model of antigen—antibody reaction is expected at the magnetic beads/gate insulator nanogap interface, changing the pH at the solution/dielectric interface owing to the weak acidity of streptavidin. In addition, the effect of the pH or ionic strength of the measurement solutions on the electrical signals of the MCC-based ISFET sensor is investigated. Furthermore, bound/free (B/F) molecule separation with a microfluidic device is very important to obtain an actual electrical signal based on the streptavidin–biotin interaction. Platforms based on the MCC method are suitable for exploiting the advantages of ISFETs as pH sensors, that is, direct monitoring systems for antigen–antibody reactions in the field of in vitro diagnostics.

Biologically Coupled Gate Field-Effect Transistors Meet in Vitro Diagnostics

In this paper, recent works on biologically coupled gate field-effect transistor (bio-FET) sensors are introduced and compared to provide a perspective. Most biological phenomena are closely related to behaviors of ions and biomolecules. This is why biosensing devices for detecting ionic and biomolecular charges contribute to the direct analysis of biological phenomena in a label-free and enzyme-free manner. Potentiometric biosensors such as bio-FET sensors, which allow the direct detection of these charges on the basis of the field effect, meet this requirement and have been developed as simple devices for in vitro diagnostics (IVD). A variety of biological ionic behaviors generated by biomolecular recognition events and cellular activities are being targeted for clinical diagnostics as well as the study of neuroscience using the bio-FET sensors. To realize these applications, bioelectrical interfaces should be formed between the electrolyte solution and the gate electrode by modifying artificially synthesized and biomimetic membranes, resulting in the selective detection of targets based on intrinsic molecular charges. Various types of semiconducting materials, not only inorganic semiconductors but also organic semiconductors, can be selected for use in bio-FET sensors, depending on the application field. In addition, a semiconductor integrated circuit device is ideal for the massively parallel detection of multiple samples. Thus, platforms based on bio-FET sensors are suitable for use in simple and miniaturized electrical circuit systems for IVD to enable the prevention and early detection of diseases.

High Aspect Ratio Fin-Ion Sensitive Field Effect Transistor: Compromises toward Better Electrochemical Biosensing

The development of next generation medicines demands more sensitive and reliable label-free sensing able to cope with increasing needs of multiplexing and shorter times to results. Field effect transistor-based biosensors emerge as one of the main possible technologies to cover the existing gap. The general trend for the sensors has been miniaturization with the expectation of improving sensitivity and response time but presenting issues with reproducibility and noise level. Here we propose a Fin-Field Effect Transistor (FinFET) with a high height to width aspect ratio for electrochemical biosensing solving the issue of nanosensors in terms of reproducibility and noise, while keeping the fast response time. We fabricated different devices and characterized their performance with their response to the pH changes that fitted to a Nernst-Poisson model. The experimental data were compared with simulations of devices with different aspect ratio, establishing an advantage in linearity and lower device resistance to provide higher current signals for the FinFETs with higher aspect ratio. In addition, these FinFETs promise the optimization of reliability and efficiency in terms of limits of detection for which the interplay of the size and geometry of the sensor with the diffusion of the analytes plays a pivotal role.

A Review of the Construction of Nano-Hybrids for Electrochemical Biosensing of Glucose

Continuous progress in the domain of nano and material science has led to modulation of the properties of nanomaterials in a controlled and desired fashion. In this sense, nanomaterials, including carbon-based materials, metals and metal oxides, and composite/hybrid materials have attracted extensive interest with regard to the construction of electrochemical biosensors. The modification of a working electrode with a combination of two or three nanomaterials in the form of nano-composite/nano-hybrids has revealed good results with very good reproducibility, stability, and improved sensitivity. This review paper is focused on discussing the possible constructs of nano-hybrids and their subsequent use in the construction of electrochemical glucose biosensors.

Emerging biosensor platforms for the assessment of water-borne pathogens

Pathogens are key contaminants in water that are responsible for the generation of various water-borne diseases, and include viruses, fungi, bacteria, and protozoan parasites. The pathogenic effects of these species in water depend on their shape, size, composition, and structure. The resulting water-borne diseases are a serious threat to the environment, including to humans and animals, and are directly responsible for environmental deterioration and pollution. The potential presence of these pathogens requires sensitive, powerful, efficient, and ideally real-time monitoring methods for their reproducible quantification. Conventional methods for pathogen detection mainly rely on time-consuming enrichment steps followed by biochemical identification strategies, which require assay times ranging from 24 h to up to a week. However, in recent years, significant efforts have been made towards the development of biosensing technologies enabling rapid and close-to-real-time detection of water-borne pathogens. This review summarizes recent developments in biosensors and sensing systems based on a variety of transducer technologies for water-quality monitoring, with specific focus on rapid pathogen detection.