Influence of Chitosan on the Viability of Encapsulated and Dehydrated Formulations of Vegetative Cells of Actinomycetes

This study focuses on developing an encapsulated and dehydrated formulation of vegetative actinobacteria cells for an efficient application in sustainable agriculture, both as a fungicidal agent in crop protection and as a growth-stimulating agent in plants. Three strains of actinobacteria were used: one from a collection (Streptomyces sp.) and two natives to agricultural soil, which were identified as S3 and S6. Vegetative cells propagated in a specific liquid medium for mycelium production were encapsulated in various alginate-chitosan composites produced by extrusion. Optimal conditions for cell encapsulation were determined, and cell damage from air-drying at room temperature was evaluated. The fresh and dehydrated composites were characterized by porosity, functional groups, size and shape, and their ability to protect the immobilized vegetative cells' viability. Actinomycetes were immobilized in capsules of 2.1-2.7 mm diameter with a sphericity index ranging from 0.058 to 0.112. Encapsulation efficiency ranged from 50% to 88%, and cell viability after drying varied between 44% and 96%, depending on the composite type, strain, and airflow. Among the three immobilized and dried strains, S3 and S6 showed greater resistance to encapsulation and drying with a 4 L·min-1 airflow when immobilized in coated and core-shell composites. Encapsulation in alginate-chitosan matrices effectively protects vegetative actinobacteria cells during dehydration, maintaining their viability and functionality for agricultural applications.

TMT-based quantitative proteomic analysis reveals eggshell matrix protein changes correlated with eggshell quality in Jing Tint 6 laying hens of different ages

The decline in eggshell quality resulting from aging hens poses a threat to the financial benefits of the egg industry. The deterioration of eggshell quality with age can be attributed to changes in its ultrastructure and chemical composition. Specific matrix proteins in eggshells have a role in controlling crystal growth and regulating structural organization. However, the variations in ultrastructure and organic matrix of eggshells in aging hens remain poorly understood. This study assessed the physical traits, mechanical quality, chemical content, as well as the microstructural and nanostructural properties of eggs from Jing Tint 6 hens at 38, 58, 78, and 108 wk of age. Subsequently, a quantitative proteomic analysis was conducted to identify differences in protein abundance in eggshells between the ages of 38 and 108 wk. The results indicated a notable decline in shell thickness, breaking strength, index, fracture toughness, and stiffness in the 108-wk-age group compared to the other groups (P < 0.05). The ultrastructure variations primarily involved an increased ratio of the mammillary layer and a reduced thickness of the effective layer of eggshell in the 108-wk-age group (P < 0.05). However, no significant differences in eggshell compositions were observed among the various age groups (P > 0.05). Proteomic analysis revealed the identification of 76 differentially expressed proteins (DEPs) in the eggshells of the 38-wk-age group and 108-wk-age group, which comprised proteins associated with biomineralization, calcium ion binding, immunity, as well as protein synthesis and folding. The downregulation of ovocleidin-116, osteopontin, and calcium-ion-related proteins, together with the upregulation of ovalbumin, lysozyme C, and antimicrobial proteins, has the potential to influence the structural organization of the eggshell. Therefore, the deterioration of eggshell quality with age may be attributed to the alterations in ultrastructure and the abundance of matrix proteins.

Unmasking pipefish otolith using synchrotron-based scanning X-ray fluorescence

Scientists use otoliths to trace fish life history, especially fish migrations. Otoliths incorporate signatures of individual growth and environmental use. For many species, distinct increment patterns in the otolith are difficult to discern; thus, questions remain about crucial life history information. To unravel the history of such species, we use synchrotron-based scanning X-ray fluorescence. It allows the mapping of elements on the entire otolith at a high spatial resolution. It gives access to precise fish migration history by tagging landmark signature for environmental transition and it also characterises localised growth processes at a mineral level. Freshwater pipefish, which are of conservation concern, have otoliths that are small and fragile. Growth increments are impossible to identify and count; therefore, there is a major lack of knowledge about their life history. We confirm for the first time, by mapping strontium that the two tropical pipefish species studied are diadromous (transition freshwater/marine/freshwater). Mapping of other elements uncovered the existence of different migratory routes during the marine phase. Another major breakthrough is that we can chemically count growth increments solely based on sulphur signal as it is implicated in biomineralization processes. This novel method circumvents reader bias issues and enables age estimation even for otoliths with seemingly untraceable increments. The high spatial resolution elemental mapping methods push back limits of studies on life traits or stock characterisation.

Chitosan as a Canvas for Studies of Macromolecular Controls on CaCO3 Biological Crystallization

A mechanistic understanding of how macromolecules, typically as an organic matrix, nucleate and grow crystals to produce functional biomineral structures remains elusive. Advances in structural biology indicate that polysaccharides (e.g., chitin) and negatively charged proteoglycans (due to carboxyl, sulfate, and phosphate groups) are ubiquitous in biocrystallization settings and play greater roles than currently recognized. This review highlights studies of CaCO₃ crystallization onto chitinous materials and demonstrates that a broader understanding of macromolecular controls on mineralization has not emerged. With recent advances in biopolymer chemistry, it is now possible to prepare chitosan-based hydrogels with tailored functional group compositions. By deploying these characterized compounds in hypothesis-based studies of nucleation rate, quantitative relationships between energy barrier to crystallization, macromolecule composition, and solvent structuring can be determined. This foundational knowledge will help researchers understand composition-structure-function controls on mineralization in living systems and tune the designs of new materials for advanced applications.

Cyclodextrin-Calcium Carbonate Micro- to Nano-Particles: Targeting Vaterite Form and Hydrophobic Drug Loading/Release

Tailor-made and designed micro- and nanocarriers can bring significant benefits over their traditional macroscopic counterparts in drug delivery applications. For the successful loading and subsequent release of bioactive compounds, carriers should present a high loading capacity, trigger release mechanisms, biodegradability and biocompatibility. Hydrophobic drug molecules can accumulate in fat tissues, resulting in drawbacks for the patient's recovery. To address these issues, we propose to combine the advantageous features of both host molecules (cyclodextrin) and calcium carbonate (CaCO₃) particles in order to load hydrophobic chemicals. Herein, hybrid cyclodextrin-CaCO₃ micro- to nano-particles have been fabricated by combining Na₂CO₃ solution and CaCl₂ solution in the presence of an additive, namely poly (vinylsulfonic acid) (PVSA) or glycerol (gly). By investigating experimental parameters and keeping the Na₂CO₃ and CaCl₂ concentrations constant (0.33 M), we have evidenced that the PVSA or gly concentration and mixing time have a direct impact on the final cyclodextrine-CaCO₃ particle size. Indeed, by increasing the concentration of PVSA (5 mM to 30 mM) or gly (0.7 mM to 4 mM) or the reaction time (from 10 min to 4 h), particles with a size of 200 nm could be reached. Interestingly, the vaterite or calcite form could also be selected, according to the experimental conditions. We hypothesised that the incorporation of PVSA or gly into the precipitation reaction might reduce the nucleation rate by sequestering Ca²⁺. The obtained particles have been found to keep their crystal structure and surface charge after storage in aqueous media for at least 6 months. In the context of improving the therapeutic benefit of hydrophobic drugs, the developed particles were used to load the hydrophobic drug tocopherol acetate. The resulting particles are biocompatible and highly stable in a physiological environment (pH 7.4, 0.15 M NaCl). A selective release of the cargo is observed in acidic media (pH lower than 5).

Cortical bone material / compositional properties in growing children and young adults aged 1.5-23 years, as a function of gender, age, metabolic activity, and growth spurt

Bone material / compositional properties are significant determinants of bone quality, thus strength. Raman spectroscopic analysis provides information on the quantity and quality of all three bone tissue components (mineral, organic matrix, and tissue water). The overwhelming majority of the published reports on the subject concern adults. We have previously reported on these properties in growing children and young adults, in the cancellous compartment. The purpose of the present study was to create normative reference data of bone material / compositional properties for children and young adults, in the cortical compartment. We performed Raman (Senterra (Bruker Optik GmbH), 50× objective, with an excitation of 785 nm (100 mW) and a lateral resolution of ~0.6 μm) microspectroscopic analysis of transiliac bone samples from 54 individuals between 1.5 and 23 years of age, with no known metabolic bone disease, and which have been previously used to establish histomorphometric, bone mineralization density distribution, and cancellous bone quality reference values. The bone quality indices that were determined were: mineral/matrix ratio (MM) from the integrated areas of the v₂PO₄ (410-460 cm^-1) and the amide III (1215-1300 cm^-1) bands, tissue water in nanopores approximated by the ratio of the integrated spectral area ~ 494-509 cm^-1 to Amide III band, the glycosaminoglycan (GAG) content (ratio of integrated area 1365-1390 cm^-1 to the Amide III band, the sulfated proteoglycan (sPG) content as the ratio of the integrated peaks ~1062 cm^-1 and 1365-1390 cm^-1, the pyridinoline (Pyd) content estimated from the ratio of the absorbance height at 1660 cm^-1 / area of the amide I (1620-1700 cm^-1) band, and the mineral maturity / crystallinity (MMC) estimated from the inverse of the full width at half height of the v₁PO₄ (930-980 cm^-1) band. Analyses were performed at the three distinct cortical surfaces (endosteal, osteonal, periosteal) at specific anatomical microlocations, namely the osteoid, and the three precisely known tissue ages based on the presence of fluorescence double labels. Measurements were also taken in interstitial bone, a much older tissue that has undergone extensive secondary mineralization. Overall, significant dependencies of the measured parameters on tissue age were observed, while at any given tissue age, sex and subject age were minimal confounders. The established Raman database in the cortical compartments complements the previously published one in cancellous bone, and provides healthy baseline bone quality indices that may serve as a valuable tool to identify alterations due to pediatric disease.

Engineered Cell-Secreted Extracellular Matrix Modulates Cell Spheroid Mechanosensing and Amplifies Their Response to Inductive Cues for the Formation of Mineralized Tissues

The clinical translation of mesenchymal stromal cell (MSC)-based therapies remains challenging due to rapid cell death and poor control over cell behavior. Compared to monodisperse cells, the aggregation of MSCs into spheroids increases their tissue-forming potential by promoting cell-cell interactions. However, MSCs initially lack engagement with an endogenous extracellular matrix (ECM) when formed into spheroids. Previously the instructive nature of an engineered, cell-secreted ECM is demonstrated to promote survival and differentiation of adherent MSCs. Herein, it is hypothesized that the incorporation of this cell-secreted ECM during spheroid aggregation would enhance MSC osteogenic potential by promoting cell-matrix and cell-cell interactions. ECM-loaded spheroids contained higher collagen and glycosaminoglycan content, and MSCs exhibited increased mechanosensitivity to ECM through Yes-associated protein (YAP) activation via integrin α2β1 binding. ECM-loaded spheroids sustained greater MSC viability and proliferation and are more responsive to soluble cues for lineage-specific differentiation than spheroids without ECM or loaded with collagen. The encapsulation of ECM-loaded spheroids in instructive alginate gels resulted in spheroid fusion and enhanced osteogenic differentiation. These results highlight the clinical potential of ECM-loaded spheroids as building blocks for the repair of musculoskeletal tissues.

Fabrication and applications of bioactive chitosan-based organic-inorganic hybrid materials: A review

Organic-inorganic hybrid materials like bone, shells, and teeth can be found in nature, which are usually composed of biomacromolecules and nanoscale inorganic ingredients. Synergy of organic-inorganic components in hybrid materials render them outstanding and versatile performance. Chitosan is commonly used organic materials in bionic hybrid materials since its bioactive properties and could be controllable tailored by various means to meet complex conditions in different applications. Among these fabrication means, hybridization was favored for its convenience and efficiency. This review discusses three kinds of chitosan-based hybrid materials: hybridized with hydroxyapatite, calcium carbonate, and clay respectively, which are the representative of phosphate, carbonate, and hydrous aluminosilicates. Here, we reported the latest developments of the preparation methods, composition, structure and applications of these bioactive hybrid materials, especially in the biomedical field. Despite the great progress was made in bioactive organic-inorganic hybrid materials based on chitosan, some challenges and specific directions are still proposed for future development in this review.

Recent advances of emerging green chitosan-based biomaterials with potential biomedical applications: A review

Chitosan is the most abundant natural biopolymer, after cellulose. It is mainly derived from the fungi, shrimp's shells, and exoskeleton of crustaceans, through the deacetylation of chitin. The ecological sustainability associated with its exercise and the flexibility of chitosan owing to its active functional hydroxyl and amino groups makes it a promising candidate for a wide range of applications through a variety of modifications. The biodegradability and biocompatibility of chitosan and its derivatives along with their various chemical functionalities make them promising carriers for pharmaceutical, nutritional, medicinal, environmental, agriculture, drug delivery, and biotechnology applications. The present work aims to provide a detailed and organized description of modified chitosan and its derivatives-based nanomaterials for biomedical applications. We addressed the biological and physicochemical benefits of nanocomposite materials made up of chitosan and its derivatives in various formulations, including improved physicochemical stability and cells/tissue interaction, controlled drug release, and increased bioavailability and efficacy in clinical practice. Moreover, several modification techniques and their effective utilization are also reviewed and collected in this review.

Effect of hormone replacement therapy on bone formation quality and mineralization regulation mechanisms in early postmenopausal women

Post-menopausal osteoporosis is characterized by a negative imbalance between bone formation and bone resorption resulting in a net bone loss, increasing the risk of fracture. One of the earliest interventions to protect against this was hormonal replacement therapy (HRT). Bone strength depends on both the amount and quality of bone, the latter including compositional / material and structural properties. Bone compositional / material properties are greatly dependent on both patient-, and tissue-age. Raman spectroscopy is an analytical tool ideally suited for the determination of bone compositional / material properties as a function of tissue age as it is capable of analyzing areas ~1 × 1 μm² in tetracycline labeled bone forming areas. Using such analysis of humeri from an ovariectomized primate animal model, we reported that loss of estrogen results in alteration in the mineralization regulation mechanisms by osteoid organic matrix attributes at actively forming bone surfaces. In the present work, we used Raman microspectroscopic techniques to compare osteoid and youngest mineralized tissue composition, as well as relationships between osteoid organic matrix quality and quality attributes of the earliest mineralized tissue in paired iliac crest biopsies obtained from early postmenopausal women before and after two years of HRT therapy. Significant correlations between osteoid proteoglycans, sulfated proteoglycans, pyridinoline, and earliest mineralized tissue mineral content were observed, suggesting that in addition to changes in bone turnover rates, HRT affects the osteoid composition, mineralization regulation mechanisms, and potentially fibrillogenesis.

Interplay of microbial communities with mineral environments in coralline algae

Coralline algae are worldwide carbonate builders, considered to be foundational species and biodiversity hotspots. Coralline habitats face increasing pressure from human activities and effects related to Global Change, yet their ecological properties and adaptive responses remain poorly understood. The relationships of the algal microbiota with the mineral bioconstructions, as well as plasticity and resilience of coralline holobionts in a changing environment, are of particular interest. In the Gulf of California, Neogoniolithon trichotomum (Rhodophyta) is the main carbonate builder in tidal pools. We performed a multi-disciplinary assessment of the N. trichotomum microstructure using XRD, SEM microscopy and SR-FTIR spectromicroscopy. In the algal perithallus, magnesium-calcite and aragonite were spatially segregated and embedded in a polysaccharide matrix (rich in sulfated polysaccharides). Mg-calcites (18-19 mol% Mg) were the main mineral components of the thallus overall, followed by iron carbonates related to dolomite (ankerite) and siderite. Minerals of late evaporitic sequences (sylvite and bischofite) were also present, suggesting potential halophilic microenvironments within the algal thalli. The diverse set of abundant halophilic, halotolerant and oligotrophic taxa, whose abundance increase in the summer, further suggests this condition. We created an integrated model, based on environmental parameters and the microbiota distribution, that identified temperature and nutrient availability (particularly nitrate and silicate) as the main parameters related to specific taxa patterns. Among these, Hahella, Granulossicoccus, Ferrimonas, Spongiibacteraceae and cyanobacterial Xenococcaceae and Nostocaceae change significantly between seasons. These bacterial components might play relevant roles in algal plasticity and adaptive responses to a changing environment. This study contributes to the understanding of the interplay of the prokaryotic microbiota with the mineral microenvironments of coralline algae. Because of their carbonates with potential resistance to dissolution in a higher pCO₂ world and their seasonally dynamic bacteria, coralline algae are relevant targets to study coastal resilience and carbonated systems responses to changing environments.

Design and evaluation of collagen-inspired mineral-hydrogel nanocomposites for bone regeneration

Bone loss due to trauma and tumors remains a serious clinical concern. Due to limited availability and disease transmission risk with autografts and allografts, calcium phosphate bone fillers and growth factor-based substitute bone grafts are currently used in the clinic. However, substitute grafts lack bone regeneration potential when used without growth factors. When used along with the added growth factors, they lead to unwanted side effects such as uncontrolled bone growth. Collagen-based hydrogel grafts available on the market fail to provide structural guidance to native cells due to high water-solubility and faster degradation. To overcome these limitations, we employed bioinspired material design and fabricated three different hydrogels with structural features similar to native collagen at multiple length-scales. These hydrogels fabricated using polyionic complexation of oppositely charged natural polysaccharides exhibited multi-scale architecture mimicking nanoscale banding pattern, and microscale fibrous structure of native collagen. All three hydrogels promoted biomimetic apatite-like mineral deposition in vitro elucidating crystalline structure on the surface while amorphous calcium phosphate inside the hydrogels resulting in mineral-hydrogel nanocomposites. When evaluated in a non-load bearing critical size mouse calvaria defect model, chitosan - kappa carrageenan mineral-hydrogel nanocomposites enhanced bone regeneration without added growth factors compared to empty defect as well as widely used marketed collagen scaffolds. Histological assessment of the regenerated bone revealed improved healing and tissue remodeling with mineral-hydrogel nanocomposites. Overall, these collagen-inspired mineral-hydrogel nanocomposites showed multi-scale hierarchical structure and can potentially serve as promising bioactive hydrogel to promote bone regeneration. STATEMENT OF SIGNIFICANCE: Hydrogels, especially collagen, are widely used in bone tissue engineering. Collagen fibrils play arguably the most important role during natural bone development. Its multi-scale hierarchical structure to form fibers from fibrils and electrostatic charges enable mineral sequestration, nucleation, and growth. However, bulk collagen hydrogels exhibit limited bone regeneration and are mostly used as carriers for highly potent growth factors such as bone morphogenic protein-2, which increase the risk of uncontrolled bone growth. Thus, there is an unmet clinical need for a collagen-inspired biomaterial that can recreate structural hierarchy, mineral sequestration ability, and stimulate recruitment of host progenitor cells to facilitate bone regeneration. Here, we propose collagen-inspired bioactive mineral-hydrogel nanocomposites as a growth factor-free approach to guide and enhance bone regeneration.

Macro-to-nanoscale investigation of wall-plate joints in the acorn barnacle Semibalanus balanoides: correlative imaging, biological form and function, and bioinspiration

Correlative imaging combines information from multiple modalities (physical-chemical-mechanical properties) at various length scales (centimetre to nanometre) to understand the complex biological materials across dimensions (2D-3D). Here, we have used numerous coupled systems: X-ray microscopy (XRM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), optical light microscopy (LM) and focused ion beam (FIB-SEM) microscopy to ascertain the microstructural and crystallographic properties of the wall-plate joints in the barnacle Semibalanus balanoides. The exoskeleton is composed of six interlocking wall plates, and the interlocks between neighbouring plates (alae) allow barnacles to expand and grow while remaining sealed and structurally strong. Our results indicate that the ala contain functionally graded orientations and microstructures in their crystallography, which has implications for naturally functioning microstructures, potential natural strengthening and preferred oriented biomineralization. Elongated grains at the outer edge of the ala are oriented perpendicularly to the contact surface, and the c-axis rotates with the radius of the ala. Additionally, we identify for the first time three-dimensional nanoscale ala pore networks revealing that the pores are only visible at the tip of the ala and that pore thickening occurs on the inside (soft bodied) edge of the plates. The pore networks appear to have the same orientation as the oriented crystallography, and we deduce that the pore networks are probably organic channels and pockets, which are involved with the biomineralization process. Understanding these multiscale features contributes towards an understanding of the structural architecture in barnacles, but also their consideration for bioinspiration of human-made materials. The work demonstrates that correlative methods spanning different length scales, dimensions and modes enable the extension of the structure-property relationships in materials to form and function of organisms.

Modulation of calcium oxalate dihydrate growth by phosphorylated osteopontin peptides

Osteopontin (OPN) is a significant component of kidney stone matrix and a key modulator of stone formation. Here, we investigated the effects of different phosphorylated states of a synthesized peptide of OPN (the ASARM peptide; acidic, serine- and aspartate-rich motif) on calcium oxalate dihydrate (COD) crystals, a major mineral phase of kidney stones. In vitro, phosphorylated OPN-ASARM peptides strongly inhibited COD crystal growth in solution as compared to the nonphosphorylated state, with increasing inhibitory potency correlating with the degree of peptide phosphorylation. Scanning electron microscopy revealed that the inhibition from the phosphopeptides resulted in distinctive, rosette-like crystal aggregates called spherulites. The OPN-ASARM peptides preferentially bound and specifically inhibited the {1 1 0} crystallographic faces of COD, as identified by combining atomic force microscopy and computational simulation approaches. These {1 1 0} surfaces of COD have high lattice calcium occupancy (exposure), providing preferential binding sites for the highly acidic peptides; binding and inhibition by OPN-ASARM peptides at the {1 1 0} faces led to crystal aggregation and intergrowth. The crystal spherulite formations obtained in vitro when using the most phosphorylated form of OPN-ASARM peptide at a high concentration, resembled crystal morphologies observed in vivo in a rat model of urolithiasis, in which crystal deposits in the kidney contain abundant OPN as revealed by immunogold labeling. A mechanistic model for spherulite formation is proposed based on the symmetry and crystallographic structure of COD, where the phosphate groups of OPN-ASARM bind to calcium atoms at [1 1 1] step risers on the COD {1 1 0} surface, inducing the periodic emergence of new COD crystals to form spherulites.

Retrosynthesis of CaCO3 via amorphous precursor particles using gastroliths of the Red Claw lobster (Cherax quadricarinatus)

Gastroliths are highly calcified structures formed in the cardiac stomach wall of crustaceans for the temporary storage of amorphous CaCO₃ (ACC). The gastrolithic ACC is stabilized by the presence of biomolecules, and represents a novel model for research into biomineralization. For the first time, an in vitro biomimetic retrosynthesis of scaffolds of gastrolithic matrices with CaCO₃ is presented. With the help of synthetic polyacrylic (PAA) and phytic (PA) acids, amorphous precursor particles were stabilized in double (DD) and gas (GD) diffusion crystallization assays. The presence of these synthetic molecules as efficient inhibitors of nucleation and growth of CaCO₃, and the use of biological gastrolith scaffolds as confined reaction environments determined the kinetics of crystallization, and controlled the morphogenesis of CaCO₃. The formation of ACC particles was demonstrated and their crystallization was followed by light microscopy, scanning and transmission electron microscopy, and electron diffraction.

Plasma-enhanced chemical vapor deposition of n-heptane and methyl methacrylate for potential cell alignment applications

Plasma-enhanced chemical vapor deposited polymers (plasma polymers) are promising candidates for biomaterials applications. In the present study, plasma deposition as a fast and easily scalable method was adapted to deposit coatings from n-heptane and methyl methacrylate monomers onto glass substrates. Linear patterns with line and groove widths between 1.25 and 160 μm were introduced by degrative UV-lithography for cell alignment. Differential interference contrast optical microscopy, profilometry and atomic force microscopy revealed that the patterned surfaces had a smooth, homogeneous appearance and a pattern height of 8 and 45 nm for plasma deposited n-heptane and methyl methacrylate, respectively. UV-lithography increased the oxygen content on the surface drastically as shown by X-ray photoelectron spectroscopy. After immersion in simulated body fluid for 21 days, the pattern was still intact, and the ester groups were also maintained for the most part as shown by infrared spectroscopy. To test the coatings' potential applicability for biomaterial surfaces in a preliminary experiment, we cultured murine preosteoblastic MC3T3-E1 cells on these coatings. Light and electron microscopically, a normal spindle-shaped and aligned cell morphology was observed. At the mRNA level, cells showed no signs of diminished proliferation or elevated expression of apoptosis markers. In conclusion, plasma-enhanced chemical vapor deposited polymers can be patterned with a fast and feasible method and might be suitable materials to guide cell alignment.

Embedded proteins and sacrificial bonds provide the strong adhesive properties of gastroliths

The adhesive properties of gastroliths from a freshwater crayfish (Cherax quadricarinatus) were quantified by colloidal probe atomic force microscopy (AFM) between heavily demineralized gastrolith microparticles and gastrolith substrates of different composition. Combined AFM and transmission electron microscopy studies demonstrated that the sequential detachment and large adhesion energies that characterise the adhesive behaviour of a native gastrolith substrate are dominated by sacrificial bonds between chitin fibres and between chitin fibres and CaCO(3). The sacrificial bonds were shown to be strongly related to the gastrolith proteins and when the majority of these proteins were removed by ethylenediaminetetraacetic acid (EDTA), the sequential detachment disappeared and the adhesive energy was reduced by more than two orders of magnitude.

Bio-inspired synthesis: understanding and exploitation of the crystallization process from amorphous precursors

Many biominerals, such as mollusk nacre, sea urchin, bone and teeth, are found to form by an amorphous precursor pathway, and these biominerals have remarkable properties, which are better than their artificial material counterparts that are formed at high temperatures and high pressures. More than ever, synthesizing technologically relevant materials following nature's way with a specific size, shape, orientation, organization, and complex form has been a focus of ongoing interest due to the increasing need for low cost and environmentally friendly approaches to processing advanced materials. Herein, we present recent developments in the crystallization process from amorphous precursors by primarily drawing on results from our own laboratory, and discuss some unique characteristics from the transformation process that can be exploited for the design and synthesis of artificial functional materials.

A novel approach for the characterisation of proteoglycans and biosynthetic enzymes in a snail model

Proteoglycans encompass a heterogeneous group of glycoconjugates where proteins are substituted with linear, highly negatively charged glycosaminoglycan chains. Sulphated glycosaminoglycans are ubiquitous to the animal kingdom of the Eukarya domain. Information on the distribution and characterisation of proteoglycans in invertebrate tissues is limited and restricted to a few species. By the use of multidimensional protein identification technology and immunohistochemistry, this study shows for the first time the presence and tissue localisation of different proteoglycans, such as perlecan, aggrecan, and heparan sulphate proteoglycan, amongst others, in organs of the gastropoda Achatina fulica. Through a proteomic analysis of Golgi proteins and immunohistochemistry of tissue sections, we detected the machinery involved in glycosaminoglycan biosynthesis, related to polymer formation (polymerases), as well as secondary modifications (sulphation and uronic acid epimerization). Therefore, this work not only identifies both the proteoglycan core proteins and glycosaminoglycan biosynthetic enzymes in invertebrates but also provides a novel method for the study of glycosaminoglycan and proteoglycan evolution.

Mineralogical signatures of stone formation mechanisms

The mechanisms involved in biomineralization are modulated through interactions with organic matrix. In the case of stone formation, the role of the organic macromolecules in the complex urinary environment is not clear, but the presence of mineralogical 'signatures' suggests that some aspects of stone formation may result from a non-classical crystallization process that is induced by acidic proteins. An amorphous precursor has been detected in many biologically controlled mineralization reactions, which is thought to be regulated by non-specific interactions between soluble acidic proteins and mineral ions. Using in vitro model systems, we find that a liquid-phase amorphous mineral precursor induced by acidic polypeptides can lead to crystal textures that resemble those found in Randall's plaque and kidney stones. This polymer-induced liquid-precursor process leads to agglomerates of coalesced mineral spherules, dense-packed spherulites with concentric laminations, mineral coatings and 'cements', and collagen-associated mineralization. Through the use of in vitro model systems, the mechanisms involved in the formation of these crystallographic features may be resolved, enhancing our understanding of the potential role(s) that proteins play in stone formation.

Acid polysaccharide-induced amorphous calcium carbonate (ACC) films: colloidal nanoparticle self-organization process

Amorphous calcium carbonate (ACC) plays important roles in biomineralization, and its synthesis in vitro has been of keen interest in the field of biomimetic materials. In this report, we describe the synthesis of ACC films using a novel acid polysaccharide, maleic chitosan, as an additive. We prepared the films by directly depositing them onto TEM grids and examined them using polarized optical microscopy (POM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) combined with selected area electron diffraction (SAED). This enabled us to examine their formation and mesostructure without introducing artifacts. We observed that, in the presence of maleic chitosan, the ACC films are formed through a particle buildup process, with aggregation and coalescence occurring simultaneously. Nanoparticles with a size of less than 10 nm appear to be the basic units responsible for such self-organization. We suggest that the acid polysaccharide plays an important role in forming and stabilizing these nanoparticles, and we propose a colloidal nanoparticle self-organization model to explain the formation of the ACC films.

Influence of conducting polymers based on carboxylated polyaniline on in vitro CaCO3 crystallization

Conducting polymers are interesting materials of technological applications, while the use of polymers as additives controlling crystal nucleation and growth is a fast growing research field. In the present article, we make a first step in combining both topics and report the effect of conducting polymer derivatives, which are based on carboxylated polyanilines (c-PANIs), on in vitro CaCO3 crystallization by the Kitano and gas diffusion method. This is the first example of the mineralization control of CaCO3 by a rigid carboxylated polymer. Both the concentration of c-PANI and the presence of carboxylate groups have a strong influence on the CaCO3 crystallization behavior and crystal morphology. X-ray diffraction (XRD) analysis shows crystalline calcite particles confirmed by FTIR spectra. pH and Ca2+ measurements during CaCO3 crystallization utilizing the Kitano and a constant-pH approach show a defined nucleation period of CaCO3 particles. The measurements allow for the calculation of the supersaturation time development, and the kinetic data can be combined with time-dependent light microscopy. The presence of c-PANIs delays the time of nucleation indicative of calcite nucleation inhibition. Microscopy illustrates the morphologies of CaCO3 crystals at all crystallization stages, from homogeneous spherical amorphous CaCO3 (ACC) particles corresponding to the first steps of crystallization to transition stage calcite crystals also involving a dissolution-recrystallization process in a late stage of crystallization. The data show that it is not possible to conclude the crystallization mechanism even for a very simple additive controlled crystallization process without time-resolved microscopic data supplemented by the analysis of the species present in the solution. Finally, fluorescence analysis indicates that conducting polymer derivatives can be incorporated into precipitated calcite particles. This gives rise to CaCO3 particles with novel and interesting optical properties.

Observation of an organic-inorganic lattice match during biomimetic growth of (001)-oriented calcite crystals under floating sulfate monolayers

Macromolecular layers rich in amino acids and with some sulfated polysaccharides appear to control oriented calcite growth in living organisms. Calcite crystals nucleating under floating acid monolayers have been found to be unoriented on average. We have now observed directly, using in situ grazing incidence X-ray diffraction, that there is a 1:1 match between the monolayer unit cell and the unit cell of the (001) plane of calcite. Thus, sulfate head groups appear to act as templates for the growth of (001)-oriented calcite crystals, which is the orientation commonly found in biominerals.

Calcium carbonate particle growth depending on coupling among adjacent layers in hybrid LB/LbL films

There are practical and academic situations that justify the study of calcium carbonate crystallization and especially of systems that are associated with organic matrices and a confined medium. Despite the fact that many different matrices have been studied, the use of well-behaved, thin organic films may provide new knowledge about this system. In this work, we have studied the growth of calcium carbonate particles on well-defined organic matrices that were formed by layer-by-layer (LbL) polyelectrolyte films deposited on phospholipid Langmuir-Blodgett films (LB). We were able to change the surface electrical charge density of the LB films by changing the proportions of a negatively charged lipid, the sodium salt of dimyristoyl-sn-glycero-phosphatidyl acid (DMPA), and a zwitterionic lipid, dimyristoyl-sn-glycero-phosphatidylethanolamine (DMPE). This affects the subsequent polyelectrolyte LbL film deposition, which also changes the the nature of the bonding (electrostatic interaction or hydrogen bonding). This approach allowed for the formation of calcium carbonate particles of different final shapes, roughnesses, and sizes. The masses of deposited lipids, polyelectrolytes, and calcium cabonate were quantified by the quartz crystal microbalance technique. The structures of obtained particles were analyzed by scanning electron microscopy.

Identification of a novel matrix protein contained in a protein aggregate associated with collagen in fish otoliths

In the biomineralization processes, proteins are thought to control the polymorphism and morphology of the crystals by forming complexes of structural and mineral-associated proteins. To identify such proteins, we have searched for proteins that may form high-molecular-weight (HMW) aggregates in the matrix of fish otoliths that have aragonite and vaterite as their crystal polymorphs. By screening a cDNA library of the trout inner ear using an antiserum raised against whole otolith matrix, a novel protein, named otolith matrix macromolecule-64 (OMM-64), was identified. The protein was found to have a molecular mass of 64 kDa, and to contain two tandem repeats and a Glu-rich region. The structure of the protein and that of its DNA are similar to those of starmaker, a protein involved in the polymorphism control in the zebrafish otoliths [Söllner C, Burghammer M, Busch-Nentwich E, Berger J, Schwarz H, Riekel C & Nicolson T (2003) Science302, 282-286]. (45)Ca overlay analysis revealed that the Glu-rich region has calcium-binding activity. Combined analysis by western blotting and deglycosylation suggested that OMM-64 is present in an HMW aggregate with heparan sulfate chains. Histological observations revealed that OMM-64 is expressed specifically in otolith matrix-producing cells and deposited onto the otolith. Moreover, the HMW aggregate binds to the inner ear-specific short-chain collagen otolin-1, and the resulting complex forms ring-like structures in the otolith matrix. Overall, OMM-64, by forming a calcium-binding aggregate that binds to otolin-1 and forming matrix protein architectures, may be involved in the control of crystal morphology during otolith biomineralization.

The two-step mode of growth in the scleractinian coral skeletons from the micrometre to the overall scale

It has been known since the 19th century that coral skeletons are built of aragonite crystals with taxonomy-linked arrangements, but the way by which each coral species controls this crystallization process remains an unsolved question. The problem became still more intriguing when it was shown that isotopic compositions of coral aragonite were subject to taxonomy-linked influences (the "vital effect"). On the other hand, presence of an organic component in coral skeletons is also long known, but localization of these compounds is admittedly restricted to particular structures called "centres of calcifications." Fibres, the largely predominant part of the coral skeletons, are usually considered as purely mineral units. In this paper, it is shown that in both "centres of calcification" and fibres, organic compounds are associated with the mineral material at a deep structural level. A series of variously scaled observations and localized measurements allow recognition of the presence of an organic component at the nanometre scale. Far from being a freely operating process, crystallization of coral fibres is thus permanently controlled by the polyp basal ectoderm through a cyclic two-step process acting at the micrometre-scale. The biomineralization cycle begins by secretion of a proteoglycan matrix. As the composition of these sugars-proteins assemblages has been shown taxonomy dependent, the hypothesis can be made that multiple and long recognized specificities of coral skeletons are linked to this biochemically driven crystallization process. Additionally, this new concept of the biomineralization process in coral skeletons provides us with an access to the long term evolution of the Scleractinia. Remarkably, results of a skeleton-based approach using microstructural criteria (i.e., the spatial relationships of "centres of calcification" and the three-dimensional arrangements of fibres), are consistent with a molecular phylogenetic analysis carried out on the same species. Clearly, at the overall ontogenic level, the two-step growth mode of coral skeletons is also a valuable tool to reconstruct the evolutionary history of Scleractinia.

Selective crystallization of calcium salts by poly(acrylate)-grafted chitosan

The biopolymer chitosan was chemically modified by grafting polyacrylamide or polyacrylic acid in a homogeneous aqueous phase using potassium persulfate (KPS) as redox initiator system in the presence of N,N-methylene-bis-acrylamide as a crosslinking agent. The influence of the grafted chitosan on calcium salts crystallization in vitro was studied using the sitting-drop method. By using polyacrylamide grafted chitosan as substrate, rosette-like CaSO4 crystals were observed. This was originated by the presence of sulfate coming from the initiator KPS. By comparing crystallization on pure chitosan and on grafted chitosan, a dramatic influence of the grafted polymer on the crystalline habit of both salts was observed. Substrates prepared by combining sulfate with chitosan or sulfate with polyacrylamide did not produce similar CaSO4 morphologies. Moreover, small spheres or donut-shaped CaCO3 crystals on polyacrylic acid grafted chitosan were generated. The particular morphology of CaCO3 crystals depends also on other synthetic parameters such as the molecular weight of the chitosan sample and the KPS concentration.

Purification and Characterization of a Vaterite-Inducing Peptide, Pelovaterin, from the Eggshells ofPelodiscussinensis(Chinese Soft-Shelled Turtle)

Proteins play a crucial role in the biomineralization of hard tissues such as eggshells. We report here the purification, characterization, and in vitro mineralization studies of a peptide, pelovaterin, extracted from eggshells of a soft-shelled turtle. It is a glycine-rich peptide with 42 amino acid residues and three disulfide bonds. When tested in vitro, the peptide induced the formation of a metastable vaterite phase. The floret-shaped morphology formed at a lower concentration ( approximately 1 microM) was transformed into spherical particles at higher concentrations (>500 microM). The solution properties of the peptide are investigated by circular dichroism (CD), fluorescence emission spectroscopy, and dynamic light scattering (DLS) experiments. The conformation of pelovaterin changed from an unordered state at a low concentration to a beta-sheet structure at high concentrations. Fluorescence emission studies indicated that the quantum yield is significantly decreased at higher concentrations, accompanied by a blue shift in the emission maximum. At higher concentrations a red-edge excitation shift was observed, indicating the restricted mobility of the peptide. On the basis of these observations, we discuss the presence of a peptide concentration-dependent monomer-multimer equilibrium in solution and its role in controlling the nucleation, growth, and morphology of CaCO(3) crystals. This is the first peptide known to induce the nucleation and stabilization of the vaterite phase in solution.