Multifunctional polymeric micelles with folate-mediated cancer cell targeting and pH-triggered drug releasing properties for active intracellular drug delivery

Revolutionizing targeting precision: microfluidics-enabled smart microcapsules for tailored delivery and controlled release

As promising delivery systems, smart microcapsules have garnered significant attention owing to their targeted delivery loaded with diverse active materials. By precisely manipulating fluids on the micrometer scale, microfluidic has emerged as a powerful tool for tailoring delivery systems based on potential applications. The desirable characteristics of smart microcapsules are associated with encapsulation capacity, targeted delivery capability, and controlled release of encapsulants. In this review, we briefly describe the principles of droplet-based microfluidics for smart microcapsules. Subsequently, we summarize smart microcapsules as delivery systems for efficient encapsulation and focus on target delivery patterns, including passive targets, active targets, and microfluidics-assisted targets. Additionally, based on release mechanisms, we review controlled release modes adjusted by smart membranes and on/off gates. Finally, we discuss existing challenges and potential implications associated with smart microcapsules.

Non-activated Esters as Reactive Handles in Direct Post-Polymerization Modification

Non-activated esters are prominently featured functional groups in polymer science, as ester functional monomers display great structural diversity and excellent compatibility with a wide range of polymerization mechanisms. Yet, their direct use as a reactive handle in post-polymerization modification has been typically avoided due to their low reactivity, which impairs the quantitative conversion typically desired in post-polymerization modification reactions. While activated ester approaches are a well-established alternative, the modification of non-activated esters remains a synthetic and economically valuable opportunity. In this review, we discuss past and recent efforts in the utilization of non-activated ester groups as a reactive handle to facilitate transesterification and aminolysis/amidation reactions, and the potential of the developed methodologies in the context of macromolecular engineering.

Concentration and temperature dependent interactions and state diagram of dispersions of copolymer microgels

We investigate by means of small angle neutron scattering experiments and numerical simulations the interactions and inter-particle arrangements of concentrated dispersions of copolymer poly(N-isopropylacrylamide)-poly(ethylene glycol methyl ether methacrylate) (PNIPAM-PEGMA) microgels across the volume phase transition (VPT). The scattering data of moderately concentrated dispersions are accurately modeled at all temperatures by using a star polymer form factor and static structure factors calculated from the effective potential obtained from simulations. Interestingly, for temperatures below the VPT temperature (VPTT), the radius of gyration and blob size of the particles significantly decrease with increasing the effective packing fraction in the non-overlapping regime. This is attributed to the presence of charges in the system associated with the use of an ionic initiator in the synthesis. Simulations using the experimentally corroborated interaction potential are used to explore the state diagram in a wide range of effective packing fractions. Below and slightly above the VPTT, the system undergoes an arrest transition mainly driven by the soft repulsion between the particles. Only well above the VPTT the system is found to phase separate before arresting. Our results highlight the versatility and potential of copolymer PNIPAM-PEGMA microgels to explore different kinds of arrested states balancing attraction and repulsion by changing temperature and packing fraction.

Natural and Synthetic Micelles for Delivery of Small Molecule Drugs, Imaging Agents and Nucleic Acids

The poor solubility, lack of targetability, quick renal clearance, and degradability of many therapeutic and imaging agents strongly limit their applications inside the human body. Amphiphilic copolymers having self-assembling properties can form core-shell structures called micelles, a promising nanocarrier for hydrophobic drugs, plasmid DNA, oligonucleotides, small interfering RNAs (siRNAs) and imaging agents. Fabrication of micelles loaded with different pharmaceutical agents provides numerous advantages including therapeutic efficacy, diagnostic sensitivity, and controlled release to the desired tissues. Moreover, due to their smaller particle size (10-100 nm) and modified surfaces with different functional groups (such as ligands) help them to accumulate easily in the target location, enhancing cellular uptake and reducing unwanted side effects. Furthermore, the release of the encapsulated agents may also be triggered from stimuli-sensitive micelles at different physiological conditions or by an external stimulus. In this review article, we discuss the recent advancement in formulating and targeting different natural and synthetic micelles including block copolymer micelles, cationic micelles, and dendrimers-, polysaccharide- and protein-based micelles for the delivery of different therapeutic and diagnostic agents. Finally, their applications, outcomes, and future perspectives have been summarized.

Design of Bio-Responsive Hyaluronic Acid-Doxorubicin Conjugates for the Local Treatment of Glioblastoma

Glioblastoma is an unmet clinical need. Local treatment strategies offer advantages, such as the possibility to bypass the blood–brain barrier, achieving high drug concentrations at the glioblastoma site, and consequently reducing systemic toxicity. In this study, we evaluated the feasibility of using hyaluronic acid (HA) for the local treatment of glioblastoma. HA was conjugated to doxorubicin (DOX) with distinct bio-responsive linkers (direct amide conjugation HA-NH-DOX), direct hydrazone conjugation (HA-Hz-DOX), and adipic hydrazone (HA-AdpHz-DOX). All HA-DOX conjugates displayed a small size (less than 30 nm), suitable for brain diffusion. HA-Hz-DOX showed the best performance in killing GBM cells in both 2D and 3D in vitro models and displayed superior activity in a subcutaneous GL261 tumor model in vivo compared to free DOX and other HA-DOX conjugates. Altogether, these results demonstrate the feasibility of HA as a polymeric platform for the local treatment of glioblastoma and the importance of rationally designing conjugates.

Encapsulation of polyprodrugs enables an efficient and controlled release of dexamethasone

Water-soluble low molecular weight drugs, such as the synthetic glucocorticoid dexamethasone (DXM), can easily leak out of nanocarriers after encapsulation due to their hydrophilic nature and small size. This can lead to a reduced therapeutic efficacy and therefore to unwanted adverse effects on healthy tissue. Targeting DXM to inflammatory cells of the liver like Kupffer cells or macrophages is a promising approach to minimize typical side effects. Therefore, a controlled transport to the cells of interest and selective on-site release is crucial. Aim of this study was the development of a DXM-phosphate-based polyprodrug and the encapsulation in silica nanocontainers (SiO₂ NCs) for the reduction of inflammatory responses in liver cells. DXM was copolymerized with a linker molecule introducing pH-cleavable hydrazone bonds in the backbone and obtaining polyprodrugs (PDXM). Encapsulation of PDXMs into SiO₂ NCs provided a stable confinement avoiding uncontrolled leakage. PDXMs were degraded under acidic conditions and subsequently released out of SiO₂ NCs. Biological studies showed significantly enhanced anti-inflammatory capacity of the polyprodrug nanoformulations over non-encapsulated DXM or soluble polyprodrugs. These results demonstrate the advantage of combining the polyprodrug strategy with nanocarrier-mediated delivery for enhanced control of the delivery of water-soluble low molecular weight drugs.

Preparation and Characterization of Palladium Derivate-Loaded Micelle Formulation in Vitro as an Innovative Therapy Option against Non-Small Cell Lung Cancer Cells

Nanoparticles have been used in cancer treatments to target tumor and reduce side effects. In this study, we aimed to increase the effectiveness of palladium(II) complex [PdCl(terpy)](sac) ⋅ 2H₂ O, which previously showed anticancer potential, by preparing the nanoparticle formulation. An inhalable micellar dispersion containing a palladium(II) complex (PdNP) was prepared and its physicochemical characteristics were evaluated using in vitro tests. Morphology, size and surface charges of particle and loading/encapsulation efficiency of PdNP were analyzed by scanning electron microscopy, zeta sizer and inductively coupled plasma mass spectrometry while aerosol properties of PdNP were measured by the next generation impactor. A549 and H1299 non-small lung cancer cell types were used for cytotoxicity using SRB and ATP assays. Fluorescent staining and M30 antigen assay were carried out for cell death evaluation. Apoptosis was confirmed by flow cytometry analyses. SEM, particle size, and zeta potential results showed the particles have inhalable properties. The amount of the palladium(II) complex loaded into the particles was quantified which indicated high encapsulation efficiencies (97 %). The micellar dispersion expected to reach the alveolar region and the brachial region was determined 35 % and 47 %, respectively. PdNP showed an anti-growth effect by increasing reactive oxygen species that is followed by the induction of mitochondria-dependent apoptosis that is evidenced by pyknotic nuclei and M30 antigen level increments and disruption of polarization of membrane in mitochondria (Δψm). The results show that PdNP might be a promising inhalable novel complex to be used in non-small cell lung cancer, which warrants animal studies in further.

Nanoformulations of Drugs Based on Biodegradable Lactide Copolymers with Various Molecular Structures and Architectures

Modern pharmaceutics are actively developing towards the design of targeted drugs. The development of selectively acting formulations requires the creation of smart delivery systems based on carriers that would first find the target cells and enter them and then release the active substance locally. Nanoparticles of biocompatible and biodegradable polymers can be effectively used as such carriers. Flexible regulation of the molecular structure and architecture of polymers, as well as the modification of nanoparticles with vector molecules, allows one to construct carrier particles for the development of nanoformulations for active agents of various nature. This review presents the main approaches to the design of nanoformulations for targeted delivery, describes the methods for the preparation and study of nanoparticles based on hydrophobic and amphiphilic biodegradable lactide polymers, and discusses the effect of the molecular structure and preparation conditions on the characteristics of nanoparticles in detail. Some results of research in this area of the Kurchatov complex of NBIСS nature-like technologies are also presented.

PEG-polyaminoacid based micelles for controlled release of doxorubicin: Rational design, safety and efficacy study

A library of amphiphilic monomethoxypolyethylene glycol (mPEG) terminating polyaminoacid co-polymers able to self-assemble into colloidal systems was screened for the delivery and controlled release of doxorubicin (Doxo). mPEG-Glu/Leu random co-polymers were generated by Ring Opening Polymerization from 5 kDa mPEG-NH₂ macroinitiator using 16:0:1, 8:8:1, 6:10:1, 4:12:1 γ-benzyl glutamic acid carboxy anhydride monomer/leucine N-carboxy anhydride monomer/PEG molar ratios. Glutamic acid was selected for chemical conjugation of Doxo, while leucine units were introduced in the composition of the polyaminoacid block as spacer between adjacent glutamic repeating units to minimize the steric hindrance that could impede the Doxo conjugation and to promote the polymer self-assembly by virtue of the aminoacid hydrophobicity. The benzyl ester protecting the γ-carboxyl group of glutamic acid was quantitatively displaced with hydrazine to yield mPEG_5kDa-b-(hydGlu_m-r-Leu_n). Doxo was conjugated to the diblock co-polymers through pH-sensitive hydrazone bond. The Doxo derivatized co-polymers obtained with a 16:0:1, 8:8:1, 6:10:1 Glu/Leu/PEG ratios self-assembled into 30-40 nm spherical nanoparticles with neutral zeta-potential and CMC in the range of 4-7 μM. At pH 5.5, mimicking endosome environment, the carriers containing leucine showed a faster Doxo release than at pH 7.4, mimicking the blood conditions. Doxo-loaded colloidal formulations showed a dose dependent cytotoxicity on two cancer cell lines, CT26 murine colorectal carcinoma and 4T1 murine mammary carcinoma with IC₅₀ slightly higher than those of free Doxo. The carrier assembled with the polymer containing 6:10:1 hydGlu/Leu/PEG molar ratio {mPEG_5kDa-b-[(Doxo-hydGlu)₆-r-Leu₁₀]} was selected for subsequent in vitro and in vivo investigations. Confocal imaging on CT26 cell line showed that intracellular fate of the carrier involves a lysosomal trafficking pathway. The intratumor or intravenous injection to CT26 and 4T1 subcutaneous tumor bearing mice yielded higher antitumor activity compared to free Doxo. Furthermore, mPEG_5kDa-b-[(Doxo-hydGlu)₆-r-Leu₁₀] displayed a better safety profile when compared to commercially available Caelyx®.

Stimulus-cleavable chemistry in the field of controlled drug delivery

This review comprehensively summarises stimulus-cleavable linkers from various research areas and their cleavage mechanisms, thus provides an insightful guideline to extend their potential applications to controlled drug release from nanomaterials.

Ternary Polypeptide Nanoparticles with Improved Encapsulation, Sustained Release, and Enhanced In Vitro Efficacy of Carfilzomib

PURPOSE

To develop a new nanoparticle formulation for a proteasome inhibitor Carfilzomib (CFZ) to improve its stability and efficacy for future in vivo applications.

METHODS

CFZ-loaded ternary polypeptide nanoparticles (CFZ/tPNPs) were prepared by using heptakis(6-amino-6-deoxy)-β-cyclodextrin(hepta-hydrochloride) (HaβCD) and azido-poly(ethylene glycol)-block-poly(L-glutamic acid sodium salt) (N₃-PEG-PLE). The process involved ternary (hydrophobic/ionic/supramolecular) interactions in three steps: 1) CFZ was entrapped in the cavity of HaβCD by hydrophobic interaction, 2) the drug-cyclodextrin inclusion complexes were mixed with N₃-PEG-PLE to form polyion complex nanoparticles, and 3) the nanoparticles were modified with fluorescent dyes (AFDye 647) for imaging and/or epithelial cell adhesion molecule (EpCAM) antibodies for cancer cell targeting. CFZ/tPNPs were characterized for particle size, surface charge, drug release, stability, intracellular uptake, proteasome inhibition, and in vitro cytotoxicity.

RESULTS

tPNPs maintained an average particle size of 50 nm after CFZ entrapment, EpCAM conjugation, and freeze drying. tPNPs achieved high aqueous solubility of CFZ (>1 mg/mL), sustained drug release (t_1/2 = 6.46 h), and EpCAM-mediated cell targeting, which resulted in increased intracellular drug accumulation, prolonged proteasome inhibition, and enhanced cytotoxicity of CFZ in drug-resistant DLD-1 colorectal cancer cells.

CONCLUSIONS

tPNPs improved stability and efficacy of CFZ in vitro, and these results potentiate effective cancer treatment using CFZ/tPNPs in future vivo studies.

Developments of Smart Drug-Delivery Systems Based on Magnetic Molecularly Imprinted Polymers for Targeted Cancer Therapy: A Short Review

Cancer therapy is still a huge challenge, as especially chemotherapy shows several drawbacks like low specificity to tumor cells, rapid elimination of drugs, high toxicity and lack of aqueous solubility. The combination of molecular imprinting technology with magnetic nanoparticles provides a new class of smart hybrids, i.e., magnetic molecularly imprinted polymers (MMIPs) to overcome limitations in current cancer therapy. The application of these complexes is gaining more interest in therapy, due to their favorable properties, namely, the ability to be guided and to generate slight hyperthermia with an appropriate external magnetic field, alongside the high selectivity and loading capacity of imprinted polymers toward a template molecule. In cancer therapy, using the MMIPs as smart-drug-delivery robots can be a promising alternative to conventional direct administered chemotherapy, aiming to enhance drug accumulation/penetration into the tumors while fewer side effects on the other organs. Overview: In this review, we state the necessity of further studies to translate the anticancer drug-delivery systems into clinical applications with high efficiency. This work relates to the latest state of MMIPs as smart-drug-delivery systems aiming to be used in chemotherapy. The application of computational modeling toward selecting the optimum imprinting interaction partners is stated. The preparation methods employed in these works are summarized and their attainment in drug-loading capacity, release behavior and cytotoxicity toward cancer cells in the manner of in vitro and in vivo studies are stated. As an essential issue toward the development of a body-friendly system, the biocompatibility and toxicity of the developed drug-delivery systems are discussed. We conclude with the promising perspectives in this emerging field. Areas covered: Last ten years of publications (till June 2020) in magnetic molecularly imprinted polymeric nanoparticles for application as smart-drug-delivery systems in chemotherapy.

On Complex Coacervate Core Micelles: Structure-Function Perspectives

The co-assembly of ionic-neutral block copolymers with oppositely charged species produces nanometric colloidal complexes, known, among other names, as complex coacervates core micelles (C3Ms). C3Ms are of widespread interest in nanomedicine for controlled delivery and release, whilst research activity into other application areas, such as gelation, catalysis, nanoparticle synthesis, and sensing, is increasing. In this review, we discuss recent studies on the functional roles that C3Ms can fulfil in these and other fields, focusing on emerging structure-function relations and remaining knowledge gaps.

Polymeric Nanocarriers of Drug Delivery Systems in Cancer Therapy

Conventional chemotherapy is the most common therapeutic method for treating cancer by the application of small toxic molecules thatinteract with DNA and causecell death. Unfortunately, these chemotherapeutic agents are non-selective and can damage both cancer and healthy tissues,producing diverse side effects, andthey can have a short circulation half-life and limited targeting. Many synthetic polymers have found application as nanocarriers of intelligent drug delivery systems (DDSs). Their unique physicochemical properties allow them to carry drugs with high efficiency,specificallytarget cancer tissue and control drug release. In recent years, considerable efforts have been made to design smart nanoplatforms, including amphiphilic block copolymers, polymer-drug conjugates and in particular pH- and redox-stimuli-responsive nanoparticles (NPs). This review is focused on a new generation of polymer-based DDSs with specific chemical functionalities that improve their hydrophilicity, drug loading and cellular interactions.Recentlydesigned multifunctional DDSs used in cancer therapy are highlighted in this review.

Nanogels as drug-delivery systems: a comprehensive overview

Nanogels have attracted considerable attention as nanoscopic drug carriers, particularly for site-specific or time-controlled delivery of bioactive mediators. A high diversity of polymer systems and the simple modification of their physicochemical features have provided multipurpose forms of nanogel preparations. Nanogels have outstandingly high stability, drug loading ability, biologic consistence, good permeation capability and can be responsive to environmental stimuli. Great potential has been shown by nanogels in many fields including delivery of genes, chemotherapy drugs, diagnosis, targeting of specific organs and several others. This review focuses mainly on different types of nanogels, methods of preparation including methods of drug loading, different modes of biodegradation mechanisms as well as main mechanisms of drug release from nanogels. Recent applications of nanogels are also briefly discussed and exemplified.

A novel radiolabeled graft polymer: Investigation of the radiopharmaceutical potential using Albino Wistar rats

Fe₃O₄ magnetic graft-Lys-poly(HEMA) was synthesized, labeled with ^99mTc for the first time and its radiopharmaceutical potential was investigated using animal models in this study. Quality control procedures were carried out using thin layer radiochromatography. The labeling yield of radiolabeled polymer was found to be about 100%. Then, stability and lipophilicity were determined. The lipophilicity of ^99mTc labeled Fe₃O₄ graft-Lys-poly(HEMA) was found to be 3.77. The serum stability experiments demonstrated that approximately 100% of radiolabeled polymer existed as an intact complex in the rat serum within 240 min. Biodistribution of radiolabeled magnetic graft-Lys-poly(HEMA) was performed on female Albino Wistar rats by scintigraphy and biodistribution studies. High uptake was seen in the stomach, the pancreas, brain, ovarian, intestines and the breast.

PEG-Derivatized Dual-Functional Nanomicelles for Improved Cancer Therapy

Polymeric micelles have attracted considerable attention for effective delivery of poorly water-soluble cancer drugs. Polyethylene glycol (PEG), which has been approved for human use by the US Food and Drug Administration, is the most commonly used hydrophilic component of polymeric micelles because it is biocompatible and biodegradable. One disadvantage of traditional polymeric micelles is that they include a large amount of inert carrier materials, which do not contribute to therapeutic activity but increase cost and toxicity risk. A better alternative may be "dual-functional" micellar carriers, in which the hydrophobic carrier material (conjugated to PEG) has intrinsic therapeutic activity that complements, or even synergizes with, the antitumor activity of the drug cargo. This review summarizes recent progress in the development of PEG-derivatized dual-functional nanomicelles and surveys the evidence of their feasibility and promise for cancer therapy.

Enhancement of Binding Affinity of Folate to Its Receptor by Peptide Conjugation

(1) Background: The folate receptor (FR) is a target for cancer treatment and detection. Expression of the FR is restricted in normal cells but overexpressed in many types of tumors. Folate was conjugated with peptides for enhancing binding affinity to the FR. (2) Materials and Methods: For conjugation, folate was coupled with propargyl or dibenzocyclooctyne, and 4-azidophenylalanine was introduced in peptides for “click” reactions. We measured binding kinetics including the rate constants of association (k_a) and dissociation (k_d) of folate-peptide conjugates with purified FR by biolayer interferometry. After optimization of the conditions for the click reaction, we successfully conjugated folate with designed peptides. (3) Results: The binding affinity, indicated by the equilibrium dissociation constant (K_D), of folate toward the FR was enhanced by peptide conjugation. The enhanced FR binding affinity by peptide conjugation is a result of an increase in the number of interaction sites. (4) Conclusion: Such peptide-ligand conjugates will be important in the design of ligands with higher affinity. These high affinity ligands can be useful for targeted drug delivery system.

Strontium Sulfite: A New pH-Responsive Inorganic Nanocarrier to Deliver Therapeutic siRNAs to Cancer Cells

Inorganic nanoparticles hold great potential in the area of precision medicine, particularly for treating cancer owing to their unique physicochemical properties, biocompatibility and improved pharmacokinetics properties compared to their organic counterparts. Here we introduce strontium sulfite nanoparticles as new pH-responsive inorganic nanocarriers for efficient transport of siRNAs into breast cancer cells. We employed the simplest nanoprecipitation method to generate the strontium sulfite nanoparticles (SSNs) and demonstrated the dramatic roles of NaCl and d-glucose in particle growth stabilization in order to produce even smaller nanosize particles (Na-Glc-SSN) with high affinity towards negatively charged siRNA, enabling it to efficiently enter the cancer cells. Moreover, the nanoparticles were found to be degraded with a small drop in pH, suggesting their potential capability to undergo rapid dissolution at endosomal pH so as to release the payload. While these particles were found to be nontoxic to the cells, they showed higher potency in facilitating cancer cell death through intracellular delivery and release of oncogene-specific siRNAs targeting ros1 and egfr1 mRNA transcripts, than the strontium sulfite particles prepared in absence of NaCl and d-glucose, as confirmed by growth inhibition assay. The mouse plasma binding analysis by Q-TOF LC-MS/MS demonstrated less protein binding to smaller particles of Na-Glc-SSNs. The biodistribution studies of the particles after 4 h of treatment showed Na-Glc-SSNs had less off-target distribution than SSNs, and after 24 h, all siRNAs were cleared from all major organs except the tumors. ROS1 siRNA with its potential therapeutic role in treating 4T1-induced breast tumor was selected for subsequent in vivo tumor regression study, revealing that ROS1 siRNA-loaded SSNs exerted more significant anti-tumor effects than Na-Glc-SSNs carrying the same siRNA following intravenous administration, without any systemic toxicity. Thus, strontium sulfite emerged as a powerful siRNA delivery tool with potential applications in cancer gene therapy.

ortho-Chlorination of phenoxy 1,2-dioxetane yields superior chemiluminescent probes for in vitro and in vivo imaging

A recent methodology, developed by our group, has enabled a dramatic improvement in the emissive nature of the excited species, formed during the chemiexcitation of dioxetanes under physiological conditions. This approach has resulted in the discovery of distinct phenoxy-dioxetane luminophores that produce a chemiluminescence signal via a direct-mode of emission. Here, we show a significant pK_a effect of our new phenoxy-dioxetanes on their chemiexcitation and on their ability to serve as chemiluminescent turn-ON probes for biological applications. Using an appropriate phenoxy-dioxetane probe with a direct-mode of emission, we were able to image β-galactosidase activity, in cancer cells and in tumor-bearing mice. To the best of our knowledge, this is the first example to demonstrate in vitro and in vivo endogenous enzymatic chemiluminescence images obtained by a single-component phenoxy-dioxetane probe. We anticipate that our strategy, for the design and synthesis of such distinct luminophores, will assist in providing new effective turn-ON probes for non-invasive intravital chemiluminescence imaging techniques.

Polymeric nanogels as drug delivery systems

The present review focuses on the description of the design, synthesis and physico-chemical and biological evaluation of polymer nanogels. Nanogels are robust swollen cross-linked polymer nanoparticles that can be used as highly efficient and biodegradable carriers for the transport of drugs in controlled drug delivery. In this article, various types of nanogels are described and methods for their preparation discussed. The possibility of using synthesized nanosystems for targeting are reviewed to show the potential of tailored structures to reach either solid tumor tissue or direct tumor cells. Finally, the methods for encapsulation or attachment of biologically active molecules, e.g. drugs, proteins, are described and compared.

Synthesis of crosslinkable diblock terpolymers PDPA-b-P(NMS-co-OEG) and preparation of shell-crosslinked pH/redox-dual responsive micelles as smart nanomaterials

Crosslinked polymer nanomaterials have attracted great attention due to their stability and highly controllable drug delivery; herein, a series of well-defined amphiphilic PDPA-b-P(NMS-co-OEG) diblock terpolymers (P1–P3) were designed and prepared via RAFT polymerization and were self-assembled into non-cross-linked (NCL) nanomicelles, which were further prepared into shell-cross-linked (SCL) micelles via cystamine-based in situ shell cross-linking. Using P3 as an optimized polymer, SCL-P3 micelles were prepared, which demonstrated remarkable pH/redox-dual responsive behaviour. For drug delivery, camptothecin (CPT)-loaded SCL-P3 micelles were prepared and showed much higher CPT-loading capability than their NCL-P3 counterparts. Notably, the SCL-P3 micelles showed good synergistic pH/redox-dual responsive CPT release properties, making them potential “smart” nanocarriers for drug delivery.

A series of well-defined amphiphilic PDPA-b-P(NMS-co-OEG) diblock terpolymers were prepared via RAFT polymerization and self-assembled into non-cross-linked nanomicelles, and then shell-cross-linked micelles via cystamine-based in situ shell cross-linking.

Novel target NIR-fluorescent polymer for living tumor cell imaging

A novel NIR-diblock copolymer, PMMA-b-P(GATH-co-BOD), with efficient cancer targeting abilities and excellent biocompatibility was synthesized in this study.

Advances in Receptor-Mediated, Tumor-Targeted Drug Delivery

Receptor-mediated drug delivery presents an opportunity to enhance therapeutic efficiency by accumulating drug within the tissue of interest and reducing undesired, off-target effects. In cancer, receptor overexpression is a platform for binding and inhibiting pathways that shape biodistribution, toxicity, cell binding and uptake, and therapeutic function. This review will identify tumor-targeted drug delivery vehicles and receptors that show promise for clinical translation based on quantitative in vitro and in vivo data. The authors describe the rationale to engineer a targeted drug delivery vehicle based on the ligand, chemical conjugation method, and type of drug delivery vehicle. Recent advances in multivalent targeting and ligand organization on tumor accumulation are discussed. Revolutionizing receptor-mediated drug delivery may be leveraged in the therapeutic delivery of chemotherapy, gene editing tools, and epigenetic drugs.

Nanomedicine for anticancer and antimicrobial treatment: an overview

Nanoparticle-based treatment has become a potential therapeutic approach. The nanosize of these particles provides them with unique physicochemical properties and enhances their interaction with the biological system. Nanomaterials have the potential to overcome some of the major issues in the clinical world which may include cancer treatment and may be utilised to resolve the major problem of drug resistance in infection control. These particles are being used to improve present therapeutics by virtue of their shape, size and diverse intrinsic as well as chemical properties. The authors have discussed the use of nanoparticles in cancer treatment, infections caused by multidrug-resistant microbial strains and biofilm inhibition along with the detailed description of the current status of nanomaterials in the field of medicine.

Dual-triggered drug-release vehicles for synergistic cancer therapy

Cancer is a complex and tenacious disease. Drug-delivery systems in combination with multimodal therapy strategies are very promising candidates for cancer theranostic applications. In this study, a new drug-delivery vehicle that combine human serum albumin (HSA)- and poly(sodium 4-styrenesulfonate) (PSS)-coated gold nanorod nanoparticles(GNR/PSS/HSA NPs) was developed for synergistic cancer therapy. Doxorubicin (DOX) was loaded onto GNR/PSS/HSA NPs, by electrostatic and hydrophobic forces, to create multimodal DOX@GNR/PSS/HSA NPs. DOX@GNR/PSS/HSA NPs were found to be highly biocompatible and stable in physiological solutions. Furthermore, GNR/PSS/HSA NPs with or without DOX were designed to exhibit strong absorbance in the near-infrared region and high photothermal conversion efficiency. Therefore, bimodal DOX release from DOX@GNR/PSS/HSA NPs could be triggered by an acidic pH and by near-infrared irradiation after NPs preferentially accumulated at tumor sites, leading to a significant chemotherapeutic effect. Moreover, DOX@GNR/PSS/HSA NPs were designed to be applied during chemo- and photo-thermal combination therapy and exhibited a synergistic anticancer effect that was superior to the effect of monotherapy, from both in vitro and in vivo results. These results suggest that DOX@GNR/PSS/HSA NPs are a strong candidate for a nanoplatform for future antitumor therapeutic strategies.

Multifunctional approaches utilizing polymeric micelles to circumvent multidrug resistant tumors

The concerns impeding the success of chemotherapy in cancer is descending efficacy of drugs due to the development of multiple drug resistance (MDR). The current efforts employed to overcome MDR have failed or are limited to only preliminary in-vitro investigations. Nanotechnology is at the forefront of the drug delivery research, playing pivotal role in chemotherapy and diagnosis, thereby providing innovative approaches for the management of the disease with minimal side effects. Recently, polymeric micelles (PMs) have witnessed significant developments in cancer therapy. PMs are self-assembled colloidal particles, with a hydrophilic head and a long hydrophobic tail, which enhance the solubility, permeability and bioavailability of drugs, due to the unique features of reaching higher concentration in the biological system, above critical micellar concentration. One of the effective approaches to improve the efficacy of chemotherapy and overcome drug resistance would be to employ multifunctional approach (combination of stimuli-responsive, utilization of drug resistance modulators and combination therapy) using PMs as drug delivery systems. Actively targeted, stimuli-sensitive and multifunctional approaches involve using single and/or combination of approaches (pH-responsive, temperature regulated, reduction-sensitive, ultrasound etc.) to combat drug resistant. The review will describe PMs, types of copolymers used in PMs, preparation and characterization of PMs. A comprehensive list of PMs tested in clinical trials is discussed. Lastly, this review covers stimuli-sensitive and multifunctional approaches to overcome MDR in cancer utilizing PMs.

Block Copolymer Micelles in Nanomedicine Applications

Polymeric micelles are demonstrating high potential as nanomedicines capable of controlling the distribution and function of loaded bioactive agents in the body, effectively overcoming biological barriers, and various formulations are engaged in intensive preclinical and clinical testing. This Review focuses on polymeric micelles assembled through multimolecular interactions between block copolymers and the loaded drugs, proteins, or nucleic acids as translationable nanomedicines. The aspects involved in the design of successful micellar carriers are described in detail on the basis of the type of polymer/payload interaction, as well as the interplay of micelles with the biological interface, emphasizing on the chemistry and engineering of the block copolymers. By shaping these features, polymeric micelles have been propitious for delivering a wide range of therapeutics through effective sensing of targets in the body and adjustment of their properties in response to particular stimuli, modulating the activity of the loaded drugs at the targeted sites, even at the subcellular level. Finally, the future perspectives and imminent challenges for polymeric micelles as nanomedicines are discussed, anticipating to spur further innovations.

Synergistically Enhanced Antimetastasis Effects by Honokiol-Loaded pH-Sensitive Polymer-Doxorubicin Conjugate Micelles

In an effort to prevent metastasis of breast tumor cells- at the same time of inhibiting tumor growth with less toxic side effects, honokiol (HNK) was encapsulated into pH-sensitive polymeric micelles based on the conjugate of poly(2-ethyl-2-oxazoline)-poly(d,l-lactide) (PEOz-PLA) with doxorubicin (DOX), denoted as PEOz-PLA-imi-DOX. PEOz-PLA-imi-DOX was successfully synthesized by connecting DOX to the hydrophobic end of PEOz-PLA via acid-cleavable benzoic imine linker. HNK-loaded conjugate micelles (HNK/PP-DOX-PM) with a size of 21 nm and homogeneous spherical shape exhibited high drug-loading capacity. PEOz-PLA-imi-DOX and HNK/PP-DOX-PM displayed faster release of DOX at pH 5.0 than at pH 7.4. As anticipated, PEOz-PLA-imi-DOX maintained cytotoxicity of DOX against MDA-MB-231 cells. The synergistically enhanced in vitro antitumor effect of HNK/PP-DOX-PM was confirmed by their synergetic inhibition of MDA-MB-231 cell growth. Furthermore, the efficient prevention of tumor metastasis by HNK/PP-DOX-PM was testified by in vitro anti-invasion, wound healing and antimigration assessment in MDA-MB-231 cells, and in vivo bioluminescence imaging in nude mice. The suppression of growth and metastasis of tumor cells by HNK/PP-DOX-PM was attributed to the synergistic effect of pH-triggered drug release and HNK-aroused inhibition of matrix metalloproteinases and epithelial-mesenchymal transition, respectively. In addition, HNK/PP-DOX-PM exhibited superior biosafety than physically encapsulated dual-drug micelles. Consequently, the fabricated HNK/PP-DOX-PM may have great potential for safe and effective suppression of tumor growth and metastasis.

Designing Smart Polymer Conjugates for Controlled Release of Payloads

Incorporating labile bonds inside polymer backbone and side chains yields interesting polymer materials that are responsive to change of environmental stimuli. Drugs can be conjugated to various polymers through different conjugation linkages and spacers. One of the key factors influencing the release profile of conjugated drugs is the hydrolytic stability of the conjugated linkage. Generally, the hydrolysis of acid-labile linkages, including acetal, imine, hydrazone, and to some extent β-thiopropionate, are relatively fast and the conjugated drug can be completely released in the range of several hours to a few days. The cleavage of ester linkages are usually slow, which is beneficial for continuous and prolonged release. Another key structural factor is the water solubility of polymer-drug conjugates. Generally, the release rate from highly water-soluble prodrugs is fast. In prodrugs with large hydrophobic segments, the hydrophobic drugs are usually located in the hydrophobic core of micelles and nanoparticles, which limits the access to the water, hence lowering significantly the hydrolysis rate. Finally, self-immolative polymers are also an intriguing new class of materials. New synthetic pathways are needed to overcome the fact that much of the small molecules produced upon degradation are not active molecules useful for biomedical applications.

Polypeptide self-assemblies: nanostructures and bioapplications

Polypeptide copolymers can self-assemble into diverse aggregates. The morphology and structure of aggregates can be varied by changing molecular architectures, self-assembling conditions, and introducing secondary components such as polymers and nanoparticles. Polypeptide self-assemblies have gained significant attention because of their potential applications as delivery vehicles for therapeutic payloads and as additives in the biomimetic mineralization of inorganics. This review article provides an overview of recent advances in nanostructures and bioapplications related to polypeptide self-assemblies. We highlight recent contributions to developing strategies for the construction of polypeptide assemblies with increasing complexity and novel functionality that are suitable for bioapplications. The relationship between the structure and properties of the polypeptide aggregates is emphasized. Finally, we briefly outline our perspectives and discuss the challenges in the field.

Calcium carbonate end-capped, folate-mediated Fe3O4@mSiO2 core-shell nanocarriers as targeted controlled-release drug delivery system

Magnetic mesoporous silica nanospheres (MMSN) were prepared and the surface was modified with cancer cell-specific ligand folic acid. Calcium carbonate was then employed as acid-activated gatekeepers to cap the mesopores of the MMSN, namely, MMSN-FA-CaCO₃. The formation of the MMSN-FA-CaCO₃ was proved by several characterization techniques, viz. transmission electron microscopy, zeta potential measurement, Fourier transform infrared spectroscopy, BET surface area measurement, and UV-Vis spectroscopy. Daunomycin was successfully loaded in the MMSN-FA-CaCO₃ and the system exhibited sensitive pH stimuli-responsive release characteristics under blood or tumor microenvironment. Cellular uptake by folate receptor (FR)-overexpressing HeLa cells of the MMSN-FA-CaCO₃ was higher than that by non-folated-conjugated ones. Intracellular-uptake studies revealed preferential uptake of these nanoparticles into FR-positive [FR(+)] HeLa than FR-negative [FR(-)]A549 cell lines. DAPI stain experiment showed high apoptotic rate of MMSN-FA-DNM-CaCO₃ to HeLa cells. The present data suggest that the CaCO₃ coating and folic acid modification of MMSN are able to create a targeted, pH-sensitive template for drug delivery system with application in cancer therapy.

Rolipram-Loaded Polymeric Micelle Nanoparticle Reduces Secondary Injury after Rat Compression Spinal Cord Injury

Among the complex pathophysiological events following spinal cord injury (SCI), one of the most important molecular level consequences is a dramatic reduction in neuronal cyclic adenosine monophosphate (cAMP) levels. Many studies shown that rolipram (Rm), a phosphodiesterase IV inhibitor, can protect against secondary cell death, reduce inflammatory cytokine levels and immune cell infiltration, and increase white matter sparing and functional improvement. Previously, we developed a polymeric micelle nanoparticle, poly(lactide-co-glycolide)-graft-polyethylenimine (PgP), for combinatorial delivery of therapeutic nucleic acids and drugs for SCI repair. In this study, we evaluated PgP as an Rm delivery carrier for SCI repair. Rolipram's water solubility was increased ∼6.8 times in the presence of PgP, indicating drug solubilization in the micelle hydrophobic core. Using hypoxia as an in vitro SCI model, Rm-loaded PgP (Rm-PgP) restored cAMP levels and increased neuronal cell survival of cerebellar granular neurons. The potential efficacy of Rm-PgP was evaluated in a rat compression SCI model. After intraspinal injection, 1,1'-dioctadecyl-3,3,3',3'-tetramethyl indotricarbocyanine Iodide-loaded PgP micelles were retained at the injection site for up to 5 days. Finally, we show that a single injection of Rm-PgP nanoparticles restored cAMP in the SCI lesion site and reduced apoptosis and the inflammatory response. These results suggest that PgP may offer an efficient and translational approach to delivering Rm as a neuroprotectant following SCI.

Injectable hydrogels for delivering biotherapeutic molecules

To date, numerous delivery systems based on either organic or inorganic material have been developed to achieve efficient and sustained delivery of therapeutics. Hydrogels, which are three dimensional networks of crosslinked hydrophilic polymers, have a significant role in solving the clinical and pharmacological limitations of present systems because of their biocompatibility, ease of preparation and unique physical properties such as a tunable porous nature and affinity for biological fluids. Development of an in situ forming injectable hydrogel system has allowed excellent spatial and temporal control, unlike systemically administered therapeutics. Injectable hydrogel systems can offset difficulties with conventional hydrogel-based drug delivery systems in the clinic by forming a drug/gene delivery or cell-growing depot in the body with a single injection, thereby enabling patient compliance and comfort. Carbohydrate polymers are widely used for the synthesis of injectable in situ-forming hydrogels because of ready availability, presence of modifiable functional groups, biocompatibility and other physiochemical properties. In this review, we discuss different aspects of injectable hydrogels, such as bulk hydrogels/macrogels, microgels, and nanogels derived from natural polymers, and their importance in the delivery of therapeutics such as genes, drugs, cells or other biomolecules and how these revolutionary systems can complement existing therapeutic delivery systems.

Homing in on an intracellular target for delivery of loaded nanoparticles functionalized with a histone deacetylase inhibitor

Functionalized nanoparticles (NPs) are usually used to enhance cellular penetration for targeted drug delivery that can improve efficacy and reduce side effects. However, it is difficult to exploit intracellular targets for similar delivery applications. Herein we describe the targeted delivery of functionalized NPs by homing in on an intracellular target, histone deacetylases (HDACs). Specifically, a modified poly-lactide-co-glycolideacid (FPLGA) was yielded by conjugation with an HDAC inhibitor. Subsequently, FPLGA was used to prepare functionalized FPLGA NPs. Compared to unmodified NPs, FPLGA NPs were more efficiently uptaken or retained by MCF-7 cells and showed longer retention time intracellular. In vivo fluorescence imaging also revealed that they had a higher accumulation and a slower elimination than unmodified NPs. FPLGA NPs loaded with paclitaxel exhibited superior anticancer efficacy compared with unmodified NPs. These results offer a promising approach for intracellular drug delivery through elevating the concentration of NPs.

Nanoparticle-macrophage interactions: A balance between clearance and cell-specific targeting

The surface properties of nanoparticles (NPs) are a major factor that influences how these nanomaterials interact with biological systems. Interactions between NPs and macrophages of the reticuloendothelial system (RES) can reduce the efficacy of NP diagnostics and therapeutics. Traditionally, to limit NP clearance by the RES system, the NP surface is neutralized with molecules like poly(ethylene glycol) (PEG) which are known to resist protein adsorption and RES clearance. Unfortunately, PEG modification is not without drawbacks including difficulties with the synthesis and associations with immune reactions. To overcome some of these obstacles, we neutralized the NP surface by acetylation and compared this modification to PEGylation for RES clearance and tumor-specific targeting. We found that acetylation was comparable to PEGylation in reducing RES clearance. Additionally, we found that dendrimer acetylation did not impact folic acid (FA)-mediated targeting of tumor cells whereas PEG surface modification reduced the targeting ability of the NP. These results clarify the impact of different NP surface modifications on RES clearance and cell-specific targeting and provide insights into the design of more effective NPs.

Stimuli-Regulated Smart Polymeric Systems for Gene Therapy

The physiological condition of the human body is a composite of different environments, each with its own parameters that may differ under normal, as well as diseased conditions. These environmental conditions include factors, such as pH, temperature and enzymes that are specific to a type of cell, tissue or organ or a pathological state, such as inflammation, cancer or infection. These conditions can act as specific triggers or stimuli for the efficient release of therapeutics at their destination by overcoming many physiological and biological barriers. The efficacy of conventional treatment modalities can be enhanced, side effects decreased and patient compliance improved by using stimuli-responsive material that respond to these triggers at the target site. These stimuli or triggers can be physical, chemical or biological and can be internal or external in nature. Many smart/intelligent stimuli-responsive therapeutic gene carriers have been developed that can respond to either internal stimuli, which may be normally present, overexpressed or present in decreased levels, owing to a disease, or to stimuli that are applied externally, such as magnetic fields. This review focuses on the effects of various internal stimuli, such as temperature, pH, redox potential, enzymes, osmotic activity and other biomolecules that are present in the body, on modulating gene expression by using stimuli-regulated smart polymeric carriers.