Metal nanoparticle—conjugated polymer nanocomposites

Nanomaterials as multimodal photothermal agents (PTAs) against 'Superbugs'

Superbugs, also known as multidrug-resistant bacteria, have become a lethal and persistent threat due to their unresponsiveness toward conventional antibiotics. The main reason for this is that superbugs can rapidly mutate and restrict any foreign drug/molecule in their vicinity. Herein, nanomaterial-mediated therapies have set their path and shown burgeoning efficiency toward the ablation of superbugs. Notably, treatment modalities like photothermal therapy (PTT) have shown prominence in killing multidrug-resistant bacteria with their ability to generate local heat shock-mediated hyperthermia in such species. However, photothermal treatment has some serious limitations, such as high cost, complexity, and even toxicity to some extent. Hence, it is important to resolve such shortcomings of PTTs as they provide substantial tissue penetration. This is why multimodal PTTs have emerged and taken over this domain of research for the past few years. In this work, we have summarized and critically reviewed such exceptional works of recent times and provided a perspective to enhance their efficiencies. Profoundly, we discuss the design rationales of some novel photothermal agents (PTAs) and shed light on their mechanisms. Finally, challenges for PTT-derived multimodal therapy are presented, and capable synergistic bactericidal prospects are anticipated.

A new biocompatible silver/polypyrrole composite with in vitro antitumor activity

We used an in situ chemical oxidation method to prepare a new composite of silver nanoparticles (AgNPs) with polypyrrole (PPy), whose properties were optimized through a 2³-factorial design of the synthesis conditions. The successful formation of the AgNPs/PPy composite was confirmed by UV-Visible and FTIR spectroscopies. Transmission electron microscopy revealed the presence of AgNPs smaller than 100 nm, dispersed into the PPy matrix. This hybrid composite exhibits a blue fluorescence emission after excitation in the ultraviolet region. In MTT assays, the AgNPs/PPy composite exhibited low cytotoxicity toward non-tumoral cell lines (fibroblast, Vero, and macrophages) and selectively inhibited the viability of HeLa cells. The AgNPs/PPy composite induces ultrastructural changes in HeLa cells that are consistent with the noticeable selectivity exhibited toward them when compared to its action against non-tumoral cell lineages. Also, the AgNPs/PPy exhibited a hemolytic activity below 14% for all blood groups tested, at concentrations up to 125 μg/mL. These results suggest that the AgNPs/PPy composite has a promising potential for use as an antitumoral agent.

Polymers and Plastics Modified Electrodes for Biosensors: A Review

Polymer materials offer several advantages as supports of biosensing platforms in terms of flexibility, weight, conformability, portability, cost, disposability and scope for integration. The present study reviews the field of electrochemical biosensors fabricated on modified plastics and polymers, focusing the attention, in the first part, on modified conducting polymers to improve sensitivity, selectivity, biocompatibility and mechanical properties, whereas the second part is dedicated to modified "environmentally friendly" polymers to improve the electrical properties. These ecofriendly polymers are divided into three main classes: bioplastics made from natural sources, biodegradable plastics made from traditional petrochemicals and eco/recycled plastics, which are made from recycled plastic materials rather than from raw petrochemicals. Finally, flexible and wearable lab-on-a-chip (LOC) biosensing devices, based on plastic supports, are also discussed. This review is timely due to the significant advances achieved over the last few years in the area of electrochemical biosensors based on modified polymers and aims to direct the readers to emerging trends in this field.

Incorporated plant extract fabricated silver/poly-D,l-lactide-co-glycolide nanocomposites for antimicrobial based wound healing

Polymeric nanocomposites have gained extensive attention in modern nanotechnology by reason of its design, flexibility, sole applications and lower life cycle costs. Preparation of composites using spreading of inorganic metal nanoparticles in organic polymeric matrices has plenty of scope and applications in the biomedical field. Poly-D,l-lactide-co-glycolide (PLGA) is an appreciated polymer for composites preparation because of its non-toxic and promising biodistribution. The consideration of metal nanoparticles has extended rapidly with the presence of new nanocomposites into a range of products and technologies. Compared to bulk materials the synthesized metal nanoparticles have unique character and biomedical uses due to its shape, size, and huge surface to volume ratio. Among different inorganic metal nanoparticles, silver nanoparticles (Ag NPs) have dominated in the biomedical field owing to its diverse potential applications including imaging, sensor, diagnosis and disease treatment. Further, medicinal plant extract mediated Ag NPs shown superior advantages and its antimicrobial based wound healing prospective has been established. However, not much information on plant extract mediated Ag NPs integrated PLGA nanocomposites wound healing applications. In the present review, we discussed necessity, preparation, characterization and antimicrobial based wound healing mechanism of incorporated plant extract mediated silver/PLGA nanocomposites.

Regioselective thiocyanation of corroles and the synthesis of gold nanoparticle-corrole assemblies

Herein we demonstrate a synthetic protocol for the regioselective thiocyanation of corroles. To the best of our knowledge, thiocyanato appended corrole has never been reported earlier. The resulting thiocyanato appended corrole turned out to be a good corrole based precursor for the facile synthesis of thiol protected gold nanoparticles (Au NPs). The ligand system acts as a good bidentate framework and passivates the gold surface. A strong electronic interaction between the corrole and the gold nanoparticles is manifested by their unique photo physical properties and it also confirms that the binding through β-substitutions has a more pronounced effect even though the corrole rings are face-off to the gold surface.

Rapid in situ synthesis of polymer-metal nanocomposite films in several seconds using a CO2 laser

We demonstrate the rapid in situ synthesis of polymer-metal nanocomposite films using a CO2 laser at 10.6 μm. The mechanism of our method is that the precursor of the metal nanoparticles, i.e., the metallic ions, is very rapidly reduced in the laser-heated polymer matrix without any reducing agent. Unlike other known laser-induced reduction methods using UV lasers, which produce radicals to promote reduction, the CO2 laser energy is mainly absorbed by the glass substrate, and the laser-heated substrate heats the polymer matrix through heat diffusion to promote reduction. The superiority of the use of CO2 lasers over nanosecond visible~UV lasers is also demonstrated in terms of the damage to the film. The developed method can be a new alternative to quickly synthesize a variety of polymer-metal nanocomposite films.

Synthesis of Poly(3,4-ethylenedioxythiophene)-Platinum and Poly(3,4-ethylenedioxythiophene)-Poly(styrenesulfonate) Hybrid Fibers by Alternating Current Bipolar Electropolymerization

Alternating current (ac) bipolar electropolymerization of 3,4-ethylenedioxythiophene (EDOT) was performed in the presence of hexachloroplatinate ([PtCl₆]^2-) or poly(styrenesulfonate) (PSS). We demonstrated that both [PtCl₆]^2- and PSS were successfully incorporated into electrogenerated poly(3,4-ethylenedioxythiophene) (PEDOT) as dopants to offer hybrid fibers composed of (i) PEDOT and platinum nanoparticles (PtNPs) (PEDOT-Pt hybrid fibers) and (ii) PEDOT and PSS (PEDOT-PSS hybrid fibers), respectively, in one step, grown from the very edges of Au wires used as bipolar electrodes (BPEs).

Enhanced protection of PDMS-embedded palladium catalysts by co-embedding of sulphide-scavengers

For Pd-containing hydrodechlorination catalysts, coating with poly(dimethyl siloxane) (PDMS) was proposed earlier as promising protection scheme against poisoning. The PDMS coating can effectively repel non-permeating poisons (such as SO₃^2-) retaining the hydrodechlorination Pd activity. In the present study, the previously achieved protection efficiency was enhanced by incorporation of sulphide scavengers into the polymer. The embedded scavengers were able to bind permeating non-ionic poisons (such as H₂S) during their passage through PDMS prior to Pd contact which ensured an extended catalyst lifetime. Three scavenger types forming non-permeable sulphur species from H₂S - alkaline, oxidative or iron-based compounds - were either incorporated into single-layer coats around individual Pd/Al₂O₃ particles or into a second layer above Pd-containing PDMS films (Pd-PDMS). Hydrodechlorination and hydrogenation were chosen as model reactions, carried out in batch and continuous-flow reactors. Batch tests with all scavenger-containing catalysts showed extended Pd protection compared to scavenger-free catalysts. Solid alkaline compounds (Ca(OH)₂, NaOH, CaO) and MnO₂ showed the highest instantaneous scavenger efficiencies (retained Pd activity=30-60%), while iron-based catalysts, such as nano zero-valent iron (nZVI) or ferrocene (FeCp₂), proved less efficient (1-10%). When stepwise poisoning was applied, the protection efficiency of iron-based and oxidizing compounds was higher in the long term than that of alkaline solids. Long-term experiments in mixed-flow reactors were performed with selected scavengers, revealing the following trend of protection efficiency: CaO₂>Ca(OH)₂>FeCp₂. Under field-simulating conditions using a fixed-bed reactor, the combination of sulphide pre-oxidation in the water phase by H₂O₂ and local scavenger-enhanced Pd protection was successful. The oxidizing agent H₂O₂ does not disturb the Pd-catalysed reduction, while the PDMS-incorporated scavenger considerably extends the catalyst life in the presence of H₂S. This work demonstrates that the scavenger-based protection strategy is an effective means to increase the resistance of PDMS-embedded Pd against permeating poisons.

Fabrication and Unique Optical Properties of Two-Dimensional Silver Nanorod Arrays with Nanometer Gaps on a Silicon Substrate from a Self-Assembled Template of Diblock Copolymer

A periodic array of nanoholes was fabricated via the self-assembly of a polystyrene(PS)-b-poly(methyl methacrylate) (PMMA) block copolymer (BCP) on a silicon substrate and selective etching of the PMMA moieties. Silver nanorods (AgNRs) were then selectively deposited in the nanoholes by a galvanic displacement reaction where the pattern was hexagonally aligned according to the template. The diameter of AgNRs was controlled by changing the immersion time. Optical measurements of the AgNR arrays revealed that the extinction peak was split into two because of the electromagnetically induced transparency effect. In addition, the AgNR arrays showed a surface-enhanced Raman scattering response and were successfully transferred from a silicon substrate to a transparent and flexible polymer film while retaining the rod arrangement.

In situ synthesis and characterization of silver/polymer nanocomposites by thermal cationic polymerization processes at room temperature: initiating systems based on organosilanes and starch nanocrystals

New methods for the preparation of silver nanoparticles/polymer nanocomposite materials by thermal cationic polymerization of ε-caprolactone (ε-CL) or α-pinene oxide (α-PO) at room temperature (RT) and under air were developed. The new initiating systems were based on silanes (Si), starch nanocrystals (StN) and metal salts. Excellent polymerization profiles were revealed. It was shown that silver nanoparticles (Ag(0) NPs) were in situ formed and that the addition of StN improves the polymerization efficiency. The as-synthesized nanocomposite materials contained spherical nanoparticles homogeneously dispersed in the polymer matrices. Polymers and nanoparticles were characterized by gel permeation chromatography (GPC), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV-vis spectroscopy. A coherent picture of the involved chemical mechanisms is presented.

Synthesis of Conducting Polymer-Metal Nanoparticle Hybrids Exploiting RAFT Polymerization

The direct covalent attachment of conducting polymers (CP) to nanoparticles (NP) to form CP-NP nanohybrids is of great interest for optoelectronic device applications. Hybrids formed by covalently anchoring CP to NP, rather than traditional blending or bilayer approaches, is highly desirable. CP-NP nanohybrids have increased interfacial surface area between the two components, facilitating rapid exciton diffusion at the p-n heterojunction. These materials take advantage of the facile solution processability, lightweight characteristics, flexibility, and mechanical strength associated with CPs, and the broad spectral absorption, photostability, and high charge carrier mobility of NPs. We demonstrate the ability to polymerize a hole transporting (HT) polymer utilizing reversible-addition-fragmentation chain transfer (RAFT) polymerization and its subsequent rapid aminolysis to yield a thiol-terminated HT polymer. Subsequent facile attachment to gold (Au) and silver (Ag) NPs and cadmium selenide (CdSe) quantum dots (QDs), to form a number of CP-NP systems is demonstrated and characterized. CP-NP nanohybrids show broad spectral absorptions ranging from UV through visible to the near IR, and their facile synthesis and purification could allow for large scale industrial applications.

Preparing a pseudo-solid by the reinforcement of a polydentate thioether using silver nanoparticles

The design of networks from polymers and noble metal nanoparticles requires thorough control over topological polymer-particle arrangements. This study explores the interaction between a linear polydentate poly(propylene sulfide) (PPrS) ligand and silver nanoparticles (AgNPs) with an aim to study its effect on mechanical and viscoelastic properties. Very low amounts (0.30 vol%) of silver nanoparticles lead to significant mechanical reinforcement of PPrS, yielding viscoelastic properties of an unfastened network with solid-like elastic responses on mechanical stimulation. The materials are made by ring-opening anionic polymerization of propylene sulfide to yield high molar mass PPrS with a total of 593 thioether functionalities per chain, followed by a simple in situ "grafting to" method to homogeneously incorporate AgNPs into the polymer matrix. From investigations on the chain dynamics using dynamic rheology it is concluded that well-dispersed AgNPs impose additional topological constraints on the polymer chains. Calculations of the statistical interparticle distances support a tele-bridging polymer-particle arrangement.

Conjugated polymer P3HT–Au hybrid nanostructures for enhancing photocatalytic activity

Organic–inorganic hybrid nanostructures for designing new optical based materials for efficient photocatalysis.

Magneto-responsive nanocomposites: preparation and integration of magnetic nanoparticles into films, capsules, and gels

This review reports on the latest developments in the field of magnetic nanocomposites, with a special focus on the potentials introduced by the incorporation of magnetic nanoparticles into polymer and supramolecular matrices. The general notions and the state of the art of nanocomposite materials are summarized and the results reported in the literature over the last decade on magnetically responsive films, capsules and gels are reviewed. The most promising concepts that have inspired the design of magneto-responsive nanocomposites are illustrated through remarkable examples where the integration of magnetic nanoparticles into organic architectures has successfully taken to the development of responsive multifunctional materials.

Enzymes as bionanoreactors: glucose oxidase for the synthesis of catalytic Au nanoparticles and Au nanoparticle–polyaniline nanocomposites

Biogenic synthesis of Au nanoparticles and Au nanoparticle–polyaniline composite could be accomplished taking advantage of the reducing and catalytic activity of glucose oxidase.

Synthesis, characterization and adsorption properties of nanostructured hybrid materials modified by boron and zirconium

The adsorption properties of two new nanostructured hybrid materials containing B2O3 and ZrO2 were studied. The new organic-inorganic materials were synthesized via a sol-gel method. As a modifying agent, a quantity of 10 wt.% Zr(OPr)4 or B(OCH3)3 was added. The structure of the hybrid materials was investigated by means of (Fourier transform infrared spectroscopy (FTIR), x-ray diffractometry (XRD), scanning electron microscopy (SEM), (atomic force microscopy (AFM) and nuclear magnetic resonance spectroscopy (NMR). Based on the obtained data, the most probable cross-linking mechanism for the derived gels was proposed. The characterization of texture parameters of both materials was carried out with the use of low-temperature adsorption of nitrogen. Adsorption of Cu(II), Fe(III), Cr(III), Cd(II) and Pb(II) ions on both materials was investigated using multi-component solutions with different concentrations and acidity by means of the batch method. Kinetics of adsorption was also investigated. Pseudo-first order, pseudo-second order and intraparticle diffusion models were used to analyze kinetic data. The adsorption was significantly affected by the pH value. Equilibrium data were fitted to linear Langmuir, Freundlich and Dubinin-Radushkevich models and maximum adsorption capacities were calculated.

A highly efficient and extensively reusable "dip catalyst" based on a silver-nanoparticle-embedded polymer thin film

Achieving a harmonious combination of the efficiency of homogeneous catalysts with the reusability of heterogeneous catalysts is a fundamental and challenging problem. Metal nanoparticles in a suitable matrix offer a potential solution. However an ideal design is yet to be realized, because the critical requirements of facile access to the catalyst, its durability, and ease of retrieval and reuse are difficult to reconcile. We report herein a multilayer free-standing thin-film catalyst based on silver nanoparticles, generated in situ inside poly(vinyl alcohol) by using a facile protocol, which shows excellent efficiency and extensive reusability in the prototypical reaction, the reduction of 4-nitrophenol by sodium borohydride. The "dip catalyst" film, which can start/stop the reaction instantaneously by mere insertion/removal, is used 30 times leading to a total turnover number (TON) of ≈3390, which is unprecedented for this reaction. The efficiency of the catalyst is reduced only marginally at the end of these runs, promising further extended usage. The unique advantage of convenient catalyst monitoring is illustrated by the periodic spectroscopic and microscopic examinations of the thin film, which revealed the basis of its durability. The demonstrated potential of metal-nanoparticle-embedded polymer thin films, coupled with their versatility and ease of fabrication, promises extensive applications in chemical catalysis.