Comparison of structurally analogous Zn2, Co2, and Mg2catalysts for the polymerization of cyclic esters

An aniline-bridged bis(pyrazolyl)alkane ligand for dizinc-catalysed ring-opening polymerization

We report an aniline ligand (1) with two bis(pyrazolyl)alkane arms, and its cationic, dizinc complexes. XRD, NMR, and modelling of the dizinc complexes resulted in an unprecedented, dynamic μ-anilide core. Compared with published μ-phenolate analogues, our μ-anilide complexes show higher activity and divergent counterion trends in ring-opening polymerization of rac-lactide.

Cooperative effects of Schiff base binuclear zinc complexes on the synthesis of aliphatic and semi-aromatic polyesters

In this paper, we use mono- and bimetallic complexes based on Earth-abundant, cheap and benign zinc for the synthesis of sustainable aliphatic and semi-aromatic polyesters. Tridentate and hexadentate aldimine-thioetherphenolate ligands were used to obtain the desired zinc complexes by the reaction of proligands with opportune equivalents of zinc bis[bis(trimethylsilyl)amide]. The obtained bimetallic complexes 1 and 2 and the monometallic complex 3 were used as catalysts in the Ring-Opening Polymerization (ROP) of landmark cyclic esters, such as ε-caprolactone and lactide, and in the Ring-Opening COPolymerization (ROCOP) of cyclohexene oxide and phthalic anhydride under different reaction conditions. All catalysts were active in these two classes of reactions, showing good control of the polymerization processes. Interestingly, the bimetallic complexes have higher activity compared to their monometallic counterparts, highlighting the cooperation between the two zinc centers.

Cooperative Initiation in a Dinuclear Indium Complex for CO2 Epoxide Copolymerization

Dinuclear indium complexes have been synthesized and characterized. These include neutral and cationic indium complexes supported by a Schiff base ligand bearing a binaphthol linker. The new compounds were investigated for alternating copolymerization of CO₂ and cyclohexene oxide. In particular, the neutral indium chloride complex (±)-[(O_NapN_iN)InCl₂]₂ (4) showed high conversion of cyclohexene oxide and selectivity for poly(cyclohexene carbonate) formation without cocatalysts at 80 °C under various CO₂ pressures (2-30 bar). Importantly, the reactivity of the dinuclear indium chloride complex 4 is drastically different from that of the mononuclear indium chloride complex (±)-(NN_iO_tBu)InCl₂ (5), suggesting a cooperative initiation mechanism involving the two indium centers in 4.

Raman Study of Block Copolymers of Methyl Ethylene Phosphate with Caprolactone and L-lactide

We present an in-depth analysis of Raman spectra of novel block copolymers of methyl ethylene phosphate (MeOEP) with caprolactone (CL) and L-lactide (LA), recorded with the excitation wavelengths of 532 and 785 nm. The experimental peak positions, relative intensities and profiles of the poly(methyl ethylene phosphate) (PMeOEP), polycaprolactone (PCL) and poly(L-lactide) (PLA) bands in the spectra of the copolymers and in the spectra of the PMeOEP, PCL and PLA homopolymers turn out to be very similar. This clearly indicates the similarity between the conformational and phase compositions of PMeOEP, PCL and PLA parts in molecules of the copolymers and in the PMeOEP, PCL and PLA homopolymers. Experimental ratios of the peak intensities of PMeOEP bands at 737 and 2963 cm^-1 and the PCL bands at 1109, 1724 and 2918 cm^-1 can be used for the estimation of the PCL-b-PMeOEP copolymers chemical composition. Even though only one sample of the PMeOEP-b-PLA copolymers was experimentally studied in this work, we assume that the ratios of the peak intensities of PLA bands at 402, 874 and 1768 cm^-1 and the PMeOEP band at 737 cm^-1 can be used to characterize the copolymer chemical composition.

Niobium and Tantalum complexes derived from the acids Ph2C(X)CO2H (X = OH, NH2): synthesis, structure and ROP capability

Tetranuclear [M4(OEt)8(L1)4(μ-O)2] and dinuclear [M2(OEt)4(L2H2)4(μ-O)] complexes (M = Nb, Ta) derived from benzilic acid (L1H2) and diphenylglycine (L2H3) have been structurally characterized and are capable of the ROP of μ-caprolactone and rac-lactide.

Trianionic binucleating bis(trityl)/aryloxide ligands and their lithium, magnesium, and zinc complexes

A series of lithium complexes with trianionic bis(trityl)/aryloxide ligands were prepared by triple deprotonation of phenols with two ortho-diarylmethyl substituents. Transmetalation with one of the lithium complexes via salt metathesis resulted in the synthesis of corresponding Mg and Zn complexes, which showed distinct coordination stoichiometry and structures. The metal complexes were characterized by multi-nuclear NMR, UV–vis, and infrared spectroscopy. Additionally, the redox property of a trilithium compound was investigated by electrochemical methods. X-ray crystallography revealed that the new bis(trityl)/aryloxide ligands could simultaneously bind to two nearby metal centers both in chelating κ2-O,C fashion, making themselves rare examples of tridentate binucleating alkyl/aryloxo scaffolds.

Study on the Magneto-Structural Correlation of a New Dinuclear Cobalt(II) Complex with Double μ-Phenoxo Bridges

A new μ-phenoxo-bridged dinuclear cobalt(II) complex, [Co₂(L)₂(acac)₂(H₂O)] (1), has been synthesized by employing a new ligand, (4-methyl-2-formyl-6-(((2-trifluoromethyl)phenyl)methyliminomethyl) phenol) (HL). Structural analysis of complex 1 reveals that the geometry around cobalt centers is best described as a distorted octahedron and the distance of cobalt neighbors is 3.128(0) Å. The magnetic property studies indicate that complex 1 exhibits strong spin-orbit coupling effects and weak ferromagnetic coupling between two high-spin Co(II) centers linked by double μ-O_phenoxo bridges, with J = 1.87(2) cm^-1. The studies show that not only the Co-O-Co angle affects the alignment of the cobalt spins but also the dihedral angle between the CoOCo plane and the phenyl plane plays an important role in the magnetic coupling in this [Co₂O₂] system. Thus, the small bridging angles (96.96(11) and 96.91(11)°) and the large dihedral angles between the CoOCo plane and the phenyl plane (63.0(1) and 30.6(1)°) induce intramolecular ferromagnetic exchange interaction in complex 1.

Syntheses, structures and catalytic activity of tetranuclear Mg complexes in the ROP of cyclic esters under industrially relevant conditions

Tetranuclear magnesium imino(phenolate) complexes Mg₄(L^1–4)₄ are excellent catalysts for the ROP of bulk rac-lactide and ε-caprolactone under industrially relevant conditions.

Bimetallic and trimetallic zinc amino-bis(phenolate) complexes for ring-opening polymerization of rac-lactide

Di- and trinuclear zinc complexes of an amino-bis(phenolate) ligand show good lactide polymerization activity in both solution and melt.

Magnesium and zinc complexes bearing NNO-tridentate ketiminate ligands: synthesis, structures and catalysis in the ring-opening polymerization of lactides

Magnesium and zinc complexes bearing pyrazoline-derived ketiminate ligands, [(L^1–3)₂M₂(μ-OBn)₂] and [M(L)₂] proceed through the “coordination–insertion” mechanism in the ROP of lactides.

β-Pyridylenolate zinc catalysts for the ring-opening homo- and copolymerization of ε-caprolactone and lactides

Eleven zinc β-quinolylenolates with varying substituents have been synthesized, and some of these complexes are excellent catalysts for the ring-opening homo- and copolymerization of ε-CL and LAs.

The Role of Nitrogen Donors in Zinc Catalysts for Lactide Ring-Opening Polymerization

The electronic effects of nitrogen donors in zinc catalysts for ring-opening polymerization of cyclic esters were investigated. Alkyl and benzyloxy zinc complexes supported by tridentate diamino- and aminoimino phenolate ligands were synthesized, and their solid-state and solution structures characterized. The solution-state structures showed that the alkyl complexes are mononuclear, while the alkoxy complexes are dimeric with the ligands coordinated with different denticities depending on the nature of the ligand donors. The catalytic activities of these compounds toward the ring-opening polymerization of racemic lactide were studied and showed that catalysts with secondary and imine nitrogen donors are more active than analogues with tertiary amines.

Dinucleating Ligand Platforms Supporting Indium and Zinc Catalysts for Cyclic Ester Polymerization

The synthesis of the first alkoxide-bridged indium complex supported by a chiral dinucleating ligand platform (1), along with its zinc analogue (2), is reported. Both complexes are synthesized in a one-pot reaction starting from a chiral dinucleating bis(diamino)phenolate ligand platform, sodium ethoxide, and respective metal salts. The dinucleating indium analogue (7) based on an achiral ligand backbone is also reported. Indium complexes bearing either the chiral or achiral ligand catalyze the ring-opening polymerization of racemic lactide (rac-LA) to afford highly heterotactic poly(lactic acid) (PLA; Pr > 0.85). The indium complex bearing an achiral ligand affords essentially atactic PLA from meso-LA. The role of the dinucleating ligand structure in catalyst synthesis and polymerization activity is discussed.

Magnesium amino-bis(phenolato) complexes for the ring-opening polymerization of rac-lactide

Magnesium compounds of tetradentate amino-bis(phenolato) ligands, Mg[L1] (1) and Mg[L2] (2) (where [L1] = 2-pyridyl-N,N-bis(2-methylene-4-methoxy-6-tert-butylphenolato), and [L2] = dimethylaminoethylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenolato)) were prepared. The proligands, H2[L1] and H2[L2] were reacted with di(n-butyl)magnesium in toluene to give the desired compounds in high yields. Compounds 1 and 2 exhibit dimeric structures in solutions of non-coordinating solvents as observed by NMR spectroscopy and in the solid state as shown by the single crystal X-ray structure of 2. These compounds exhibit good activity for rac-lactide polymerization in solution and in molten lactide.

Synthesis and catalytic application of magnesium complexes bearing pendant indolyl ligands

Three novel indole-based ligand precursors [HIndPh(R), R = methoxy, HIndPh(OMe) (); thiomethoxy, HIndPh(SMe) (); and N,N'-dimethylamino, HIndPh(NMe2) ()] have been synthesized via Sonogashira and cyclization reactions with moderate to high yield. Reactions of these ligand precursors with 0.6 equivalent of Mg(n)Bu2 in THF afforded the magnesium bis-indolyl complexes , respectively. All the ligand precursors and related magnesium complexes have been characterized by NMR spectroscopy and elemental analyses. The molecular structures are reported for compounds and . Under optimized conditions, compound demonstrates efficient catalytic activities towards the ring opening polymerization of l-lactide and ε-caprolactone in the presence of BnOH.

Magnesium and aluminum complexes bearing bis(5,6,7-trihydro quinolyl)-fused benzodiazepines for ε-caprolactone polymerization

New bis(5,6,7-trihydroquinolyl)-fused benzodiazepine ligands were synthesized and used to form dinuclear magnesium and aluminum complexes which showed efficient catalytic activity toward the ROP of ε-CL.

A unique cooperative catalytic system carrying metallic iron and 2-hydroxyethyl 2-bromoisobutyrate for the controlled/living ring-opening polymerization of ε-caprolactone

Iron and 2-hydroxyethyl 2-bromoisobutyrate cooperatively initiates the ε-caprolactone polymerization, yielding polymers with high molecular weight and narrow molecular weight distribution.

Diastereoselective synthesis of chiral aminophenolate magnesium complexes and their application in the stereoselective polymerization of rac-lactide and rac-β-butyrolactone

A series of magnesium silylamido complexes supported by chiral aminophenolate ligands were synthesized, and their catalytic behaviors toward the ring-opening polymerization of rac-lactide (LA) and rac-β-butyrolactone (BBL) were explored.

Efficient Diethylzinc/Gallic Acid and Diethylzinc/Gallic Acid Ester Catalytic Systems for the Ring-Opening Polymerization of rac-Lactide

Polylactide (PLA) represents one of the most promising biomedical polymers due to its biodegradability, bioresorbability and good biocompatibility. This work highlights the synthesis and characterization of PLAs using novel diethylzinc/gallic acid (ZnEt₂/GAc) and diethylzinc/propyl gallate (ZnEt₂/PGAc) catalytic systems that are safe for human body. The results of the ring-opening polymerization (ROP) of rac-lactide (rac-LA) in the presence of zinc-based catalytic systems have shown that, depending on the reaction conditions, "predominantly isotactic", disyndiotactic or atactic PLA can be obtained. Therefore, the controlled and stereoselective ROP of rac-LA is discussed in detail in this paper.

Different mechanisms at different temperatures for the ring-opening polymerization of lactide catalyzed by binuclear magnesium and zinc alkoxides

Two binuclear magnesium and zinc alkoxides supported by a bis-salalen type dinucleating heptadentate Schiff base ligand were synthesized and fully characterized. The two complexes are efficient initiators for the ring-opening polymerization (ROP) of L-lactide, affording polymers with narrow polydispersities and desirable molecular weights. Interestingly, the mechanisms for the ROP of lactide are different at different temperatures. At a high temperature of 130 °C, a coordination-insertion mechanism is reasonable for the bulk melt polymerization of lactide. At a low temperature, the alkoxide cannot initiate the ROP reaction; however, upon the addition of external benzyl alcohol into the system, the ROP of lactide can smoothly proceed via an "activated monomer" mechanism. In addition, these complexes display slight stereo-selectivity for the ring-opening polymerization of rac-lactide, affording partially isotactic polylactide in toluene with a Pm value of 0.59.

Ring-opening polymerization of rac-lactide mediated by tetrametallic lithium and sodium diamino-bis(phenolate) complexes

Sodium complex contains interesting intramolecular η⁶-arene interaction and shows excellent catalytic behaviour for polymerization of lactide.

Zinc and cobalt complexes based on tripodal ligands: synthesis, structure and reactivity toward lactide

The coordination chemistry of a series of pro-ligands ([L¹]-[L⁶]) with cobalt and zinc derivatives has been studied. All complexes have been characterized by multinuclear NMR, elemental analysis, and by single-crystal X-ray diffraction studies. Polymerization of rac-lactide takes place at 130 °C in the presence of cobalt and zinc complexes to yield polymers under solvent free conditions with controlled molecular masses and narrow polydispersities.