Synthetic models of the active site of catechol oxidase: mechanistic studies

Position of substituents directs the electron transfer properties of entatic state complexes: new insights from guanidine-quinoline copper complexes

In a previous study, we showed that the properties and the ability as an entatic state model of copper guanidine quinoline complexes are significantly influenced by a methyl or methyl ester substituent in the 2-position. To prove the importance of the 2-position of the substituent, two novel guanidine quinoline ligands with a methyl or methyl ester substituent in the 4-position and the corresponding copper complexes were synthesized and characterized in this study. The influence of the substituent position on the copper complexes was investigated with various experimental and theoretical methods. The molecular structures of the copper complexes were examined in the solid state by single-crystal X-ray diffraction (SCXRD) and by density functional theory (DFT) calculations indicating a strong dependency on the substituent position compared to the systems substituted in the 2-position from the previous study. Further, the significantly different influence on the donor properties in dependency on the substituent position was analyzed with natural bond orbital (NBO) calculations. By the determination of the redox potentials, the impact on the electrochemical stabilization was examined. With regard to further previously analyzed guanidine quinoline copper complexes, the electrochemical stabilization was correlated with the charge-transfer energies calculated by NBO analysis and ground state energies, revealing the substituent influence and enabling a comparatively easy and accurate possibility for the theoretical calculation of the relative redox potential. Finally, the electron transfer properties were quantified by determining the electron self-exchange rates via the Marcus theory and by theoretical calculation of the reorganization energies via Nelsen's four-point method. The results gave important insights into the dependency between the ability of the copper complexes as entatic state model and the type and position of the substituent.

Approach of a small protein to the biomimetic bis-(μ-oxo) dicopper active-site installed in MOF-808 pores with restricted access perturbs substrate selectivity of oxidase nanozyme

Advances in nanozymes have taken shape over the past few years in several domains. However, persisting challenging limitations of selectivity, specificity, and efficiency necessitate careful attention to aid in the development of next-generation artificial enzymes. Despite nanozymes having significant therapeutic and biotechnological prospects, the multienzyme mimetic activities can compromise their intended applications. Furthermore, the lack of substrate selectivity can hamper crucial biological pathways. While working on addressing the challenges of nanozymes, in this work, we aim to highlight the interplay between the substrates and bis-(μ-oxo) dicopper active site-installed MOF-808 for selectively mimicking oxidase. This oxidase mimetic with a small pore-aperture (1.4 nm), similar to the opening of enzyme binding pockets, projects a tight control over the dynamics and the reactivity of substrates, making it distinct from the general oxidase nanozymes. Interestingly, the design and the well-regulated activity of this nanozyme effectively thwart DNA from approaching the active site, thereby preventing its oxidative damage. Crucially, we also show that despite these merits, the oxidase selectivity is compromised by small proteins such as cytochrome c (Cyt c), having dimensions larger than the pore aperture of MOF-808. This reaction lucidly produces water molecules as a result of four electron transfer to an oxygen molecule. Such unintended side reactivities warrant special attention as they can perturb redox processes and several cellular energy pathways. Through this study, we provide a close look at designing next-generation artificial enzymes that can address the complex challenges for their utility in advanced applications.

A Bioinspired Copper-Pair Catalyst in Metal-Organic Frameworks for Molecular Dioxygen Activation and Aerobic Oxidative C-N Coupling

Open Cu sites were loaded to the UiO-67 metal-organic framework (MOF) skeleton by introduction of flexible Cu-binding pyridylmethylamine (pyma) side chains to the biphenyldicarboxylate linkers. Distance between Cu centers in the MOF pores was tuned by controlling the density of metal-binding side chains. "Interacted" Cu-pair or "isolated" monomeric Cu sites were achieved with high and low (pyma)Cu side chain loading, respectively. Spectroscopic and theoretical studies indicate that "interacted" Cu pairs can effectively bind and activate molecular dioxygen to form Cu2O2 clusters, which showed high catalytic activity for aerobic oxidative C-N coupling. On the contrary, MOF catalyst bearing isolated monomeric Cu sites only showed modest catalytic activity. Enhancement in catalytic performance for the Cu-pair catalyst is attributed to the remote synergistic effect of the paired Cu site, which binds molecular dioxygen and cleaves the O═O bond in a collaborative manner. This work demonstrates that noncovalently interacted metal-pair sites can effectively activate inert small molecules and promote heterogeneous catalytic processes.

Self-Cascade Ce-MOF-818 Nanozyme for Sequential Hydrolysis and Oxidation

Mimicking efficient biocatalytic cascades using nanozymes has gained enormous attention in catalytic chemistry, but it remains challenging to develop a nanozyme-based cascade system to sequentially perform the desired reactions. Particularly, the integration of sequential hydrolysis and oxidation reactions into nanozyme-based cascade systems has not yet been achieved, despite their significant roles in various domains. Herein, a self-cascade Ce-MOF-818 nanozyme for sequential hydrolysis and oxidation reactions is developed. Ce-MOF-818 is the first Ce(IV)-based heterometallic metal-organic framework constructed through the coordination of Ce and Cu to distinct groups. It is successfully synthesized using an improved solvothermal method, overcoming the challenge posed by the significant difference in the binding speeds of Ce and Cu to ligands. With excellent organophosphate hydrolase-like (Km = 42.3 µM, Kcat = 0.0208 min-1 ) and catechol oxidase-like (Km = 2589 µM, Kcat = 1.25 s-1 ) activities attributed to its bimetallic active centers, Ce-MOF-818 serves as a promising self-cascade platform for sequential hydrolysis and oxidation. Notably, its catalytic efficiency surpasses that of physically mixed nanozymes by approximately fourfold, owning to the close integration of active sites. The developed hydrolysis-oxidation self-cascade nanozyme has promising potential applications in catalytic chemistry and provides valuable insights into the rational design of nanozyme-based cascade systems.

Role of Labile Methanol on the Bio-inspired Catalytic Activity of a Zn(II)-based Compound: An Experimental and Theoretical Investigation

Two Zn(II)-based compounds, [Zn2 L1 (OAc)3 (MeOH)] (1) and [Zn2 L2 (OAc)3 ]n (2), have been reported where HL1 is (E)-4-bromo-2-methoxy-6-(((2-morpholino ethyl)imino) methyl)phenol and HL2 is (E)-4-bromo-2-methoxy-6-(((2-(piperazine-1-yle)ethyl)imino)methyl) phenol. Single-crystal X-ray diffraction (SCXRD) analysis unveils vivid change in structural arrangements and dimensionality from 1 to 2 due to change in coordinated atom from oxygen to nitrogen of the ligands. SCXRD study shows that compound 1 is dinuclear but compound 2 has a 1-dimensional polymeric structure having helical chain. Structural diversity greatly influences the catalytic activity. Compound 1 acts as excellent catalyst for conversion of 3, 5-di-tert-butyl catechol (3, 5-DTBC) to 3, 5-di-tert-butylbenzoquinone (3, 5-DTBQ) with the turnover number (kcat ) value of 34.94 sec-1 . Further, compound 1 reveals phosphatase like activity for conversion of disodium salt of (4-nitrophenyl)-phosphate hexahydrate to p-nitrophenolate with the kcat value of 24.64 sec-1 . Interestingly, compound 2 does not show any catalytic activity. To correlate this distinctly different catalytic behavior of two compounds, DFT calculation was carried out. The calculation reveals that detachment of coordinated methanol from coordination sphere of zinc in compound 1 is energetically favourable which creates room for substrate binding, resulting in high catalytic activity. By contrast, in compound 2, detachment of piperazine or Zn-O of -COOH group is energetically unfavourable, resulting in no catalytic activity.

Deciphering the effect of amine versus imine ligands of copper(II) complexes in 2-aminophenol oxidation

A series of amine (1-6) and imine (5',6') based copper(II) complexes with tridentate (NNO) ligand donors were synthesized and characterized using modern analytical techniques. All the complexes were subjected to 2-aminophenol (OAP) oxidation to form 2-aminophenoxazin-3-one, as a functional analogue of an enzyme, phenoxazinone synthase. In addition, a critical comparison of the reactivity using the amine-based complexes with their respective imine counterparts was achieved in both experimental as well as theoretical studies. For instance, the kinetic measurement revealed that the imine-based copper(II) complexes (kcat, 2.4 × 105-6.2 × 106 h-1) are better than amine-based (kcat, 6.3 × 104-3.9 × 105 h-1) complexes. The complex-substrate adducts [Cu(L3)(OAP)] (7) and [Cu(L3')(OAP)] (7') were characterized for both systems by mass spectrometry. Further, the DFT study was performed with amine- (3) and imine- (3') based copper(II) complexes, to compare their efficacy in the oxidation of OAP. The mechanistic investigations reveal that the key elementary step to determine the reactivity of 3 and 3' is the proton-coupled electron transfer (PCET) step occurring from the intermediates 7/7'. Further, the computed HOMO-LUMO energy gap of 7' was smaller than 7 by 0.8 eV, which indicates the facile PCET compared to that of 7. Moreover, the coupling of the OAP moiety using imine-complexes (ΔGR.E = -5.8 kcal/mol) was found to be thermodynamically more favorable than amine complexes (ΔGR.E = +3.3 kcal/mol). Overall, the theoretical findings are in good agreement with the experimental results.

High-Valent Ni and Cu Complexes of a Tetraanionic Bis(amidateanilido) Ligand

High-valent metal species are often invoked as intermediates during enzymatic and synthetic catalytic cycles. Anionic donors are often required to stabilize such high-valent states by forming strong bonds with the Lewis acidic metal centers while decreasing their oxidation potentials. In this report, we discuss the synthesis of two high-valent metal complexes [ML]+ in which the NiIII and CuIII centers are ligated by a new tetradentate, tetraanionic bis(amidateanilido) ligand. [ML]+, obtained via chemical oxidation of ML, exhibits UV-vis-NIR, EPR, and XANES spectra characteristic of square planar, high-valent MIII species, suggesting the locus of oxidation for both [ML]+ is predominantly metal-based. This is supported by theoretical analyses, which also support the observed visible transitions as ligand-to-metal charge transfer transitions characteristic of square planar, high-valent MIII species. Notably, [ML]+ can also be obtained via O2 oxidation of ML due to its remarkably negative oxidation potentials (CuL/[CuL]+: -1.16 V, NiL/[NiL]+: -1.01 V vs Fc/Fc+ in MeCN). This demonstrates the exceptionally strong donating nature of the tetraanionic bis(amidateanilido) ligation and its ability to stabilize high-valent metal centers..

Fluorescent dyes based on rhodamine derivatives for bioimaging and therapeutics: recent progress, challenges, and prospects

Since their inception, rhodamine dyes have been extensively applied in biotechnology as fluorescent markers or for the detection of biomolecules owing to their good optical physical properties. Accordingly, they have emerged as a powerful tool for the visualization of living systems. In addition to fluorescence bioimaging, the molecular design of rhodamine derivatives with disease therapeutic functions (e.g., cancer and bacterial infection) has recently attracted increased research attention, which is significantly important for the construction of molecular libraries for diagnostic and therapeutic integration. However, reviews focusing on integrated design strategies for rhodamine dye-based diagnosis and treatment and their wide application in disease treatment are extremely rare. In this review, first, a brief history of the development of rhodamine fluorescent dyes, the transformation of rhodamine fluorescent dyes from bioimaging to disease therapy, and the concept of optics-based diagnosis and treatment integration and its significance to human development are presented. Next, a systematic review of several excellent rhodamine-based derivatives for bioimaging, as well as for disease diagnosis and treatment, is presented. Finally, the challenges in practical integration of rhodamine-based diagnostic and treatment dyes and the future outlook of clinical translation are also discussed.

A supramolecular metalloenzyme possessing robust oxidase-mimetic catalytic function

Enzymes fold into unique three-dimensional structures to distribute their reactive amino acid residues, but environmental changes can disrupt their essential folding and lead to irreversible activity loss. The de novo synthesis of enzyme-like active sites is challenging due to the difficulty of replicating the spatial arrangement of functional groups. Here, we present a supramolecular mimetic enzyme formed by self-assembling nucleotides with fluorenylmethyloxycarbonyl (Fmoc)-modified amino acids and copper. This catalyst exhibits catalytic functions akin those of copper cluster-dependent oxidases, and catalytic performance surpasses to date-reported artificial complexes. Our experimental and theoretical results reveal the crucial role of periodic arrangement of amino acid components, enabled by fluorenyl stacking, in forming oxidase-mimetic copper clusters. Nucleotides provide coordination atoms that enhance copper activity by facilitating the formation of a copper-peroxide intermediate. The catalyst shows thermophilic behavior, remaining active up to 95 °C in an aqueous environment. These findings may aid the design of advanced biomimetic catalysts and offer insights into primordial redox enzymes.

Improving Theaflavin-3,3'-digallate Production Efficiency Optimization by Transition State Conformation of Polyphenol Oxidase

Theaflavins (TFs) are good for health because of their bioactivities. Enzymatic synthesis of TFs has garnered much attention; however, the source and activity of the enzymes needed limit their wide application. In this study, a microbial polyphenol oxidase from Bacillus megaterium was screened for the synthesis of theaflavin-3,3'-digallate (TFDG). Based on structural and mechanistic analyses of the enzyme, the O-O bond dissociation was identified as the rate-determining step. To address this issue, a transition state (TS) conformation optimization strategy was adopted to stabilize the spatial conformation of the O-O bond dissociation, which improved the catalytic efficiency of tyrosinase. Under the optimum transformation conditions of pH 4.0, temperature 25 °C, (-)-epigallocatechin gallate/epicatechin gallate molar ratio of 2:1, and time of 30 min, Mu₄ (BmTyr^V218A/R209S) produced 960.36 mg/L TFDG with a 44.22% conversion rate, which was 6.35-fold higher than that of the wild type. Thus, the method established has great potential in the synthesis of TFDG and other TFs.

Magneto-structural maps and bridged-ligand effect for dichloro-bridged dinuclear copper(ii) complexes: a theoretical perspective

Theoretical understanding of magneto-structural correlations in dichloro-bridged dicopper(ii) complexes can guide the design of magnetic materials having broad-scale applications. However, previous reports suggest these correlations are complicated and unclear. To clarify possible correlations, magnetic coupling constants (J _calc) of variants of a representative {Cu-(μ-Cl)₂-Cu} complex A were calculated through BS-DFT. The variation of the Cu-(μ-Cl)-Cu angle (α), Cu⋯Cu distance (R ₀), and Cu-Cl-Cu-Cl dihedral angle (τ) followed by structural optimization and calculation of the magnetic coupling constant (J _calc) revealed several trends. J _calc increased linearly with R ₀ and τ, and initially increased and then decreased with α. Further, bridging ligand effects on J _calc for dicopper(ii) complexes were evaluated through BS-DFT; the results revealed that J _calc increased with increasing ligand field strength (I^- < Br^- < Cl^- < N₃ ^- < F^-). Furthermore, a linear relationship was found between the spin density of the bridging ligand and J _calc.

Copper(ii) and silver(i) complexes with dimethyl 6-(pyrazine-2-yl)pyridine-3,4-dicarboxylate (py-2pz): the influence of the metal ion on the antimicrobial potential of the complex

Dimethyl 6-(pyrazine-2-yl)pyridine-3,4-dicarboxylate (py-2pz) was used as a ligand for the synthesis of new copper(ii) and silver(i) complexes, [CuCl2(py-2pz)]2 (1), [Cu(CF3SO3)(H2O)(py-2pz)2]CF3SO3·2H2O (2), [Ag(py-2pz)2]PF6 (3) and {[Ag(NO3)(py-2pz)]·0.5H2O} n (4). The complexes were characterized by spectroscopic and electrochemical methods, while their structures were determined by single crystal X-ray diffraction analysis. The X-ray analysis revealed the bidentate coordination mode of py-2pz to the corresponding metal ion via its pyridine and pyrazine nitrogen atoms in all complexes, while in polynuclear complex 4, the heterocyclic pyrazine ring of one py-2pz additionally behaves as a bridging ligand between two Ag(i) ions. DFT calculations were performed to elucidate the structures of the investigated complexes in solution. The antimicrobial potential of the complexes 1-4 was evaluated against two bacterial (Pseudomonas aeruginosa and Staphylococcus aureus) and two Candida (C. albicans and C. parapsilosis) species. Silver(i) complexes 3 and 4 have shown good antibacterial and antifungal properties with minimal inhibitory concentration (MIC) values ranging from 4.9 to 39.0 μM (3.9-31.2 μg mL-1). All complexes inhibited the filamentation of C. albicans and hyphae formation, while silver(i) complexes 3 and 4 had also the ability to inhibit the biofilm formation process of this fungus. The binding affinity of the complexes 1-4 with calf thymus DNA (ct-DNA) and bovine serum albumin (BSA) was studied by fluorescence emission spectroscopy to clarify the mode of their antimicrobial activity. Catechol oxidase biomimetic catalytic activity of copper(ii) complexes 1 and 2 was additionally investigated by using 3,5-di-tert-butylcatechol (3,5-DTBC) and o-aminophenol (OAP) as substrates.

Catalysis and Electron Transfer in De Novo Designed Metalloproteins

One of the hallmark advances in our understanding of metalloprotein function is showcased in our ability to design new, non-native, catalytically active protein scaffolds. This review highlights progress and milestone achievements in the field of de novo metalloprotein design focused on reports from the past decade with special emphasis on de novo designs couched within common subfields of bioinorganic study: heme binding proteins, monometal- and dimetal-containing catalytic sites, and metal-containing electron transfer sites. Within each subfield, we highlight several of what we have identified as significant and important contributions to either our understanding of that subfield or de novo metalloprotein design as a discipline. These reports are placed in context both historically and scientifically. General suggestions for future directions that we feel will be important to advance our understanding or accelerate discovery are discussed.

Reaction of N-Acetylcysteine with Cu2+: Appearance of Intermediates with High Free Radical Scavenging Activity: Implications for Anti-/Pro-Oxidant Properties of Thiols

We studied the kinetics of the reaction of N-acetyl-l-cysteine (NAC or RSH) with cupric ions at an equimolar ratio of the reactants in aqueous acid solution (pH 1.4−2) using UV/Vis absorption and circular dichroism (CD) spectroscopies. Cu2+ showed a strong catalytic effect on the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) radical (ABTSr) consumption and autoxidation of NAC. Difference spectra revealed the formation of intermediates with absorption maxima at 233 and 302 nm (ε302/Cu > 8 × 103 M−1 cm−1) and two positive Cotton effects centered at 284 and 302 nm. These intermediates accumulate during the first, O2-independent, phase of the NAC autoxidation. The autocatalytic production of another chiral intermediate, characterized by two positive Cotton effects at 280 and 333 nm and an intense negative one at 305 nm, was observed in the second reaction phase. The intermediates are rapidly oxidized by added ABTSr; otherwise, they are stable for hours in the reaction solution, undergoing a slow pH- and O2-dependent photosensitive decay. The kinetic and spectral data are consistent with proposed structures of the intermediates as disulfide-bridged dicopper(I) complexes of types cis-/trans-CuI2(RS)2(RSSR) and CuI2(RSSR)2. The electronic transitions observed in the UV/Vis and CD spectra are tentatively attributed to Cu(I) → disulfide charge transfer with an interaction of the transition dipole moments (exciton coupling). The catalytic activity of the intermediates as potential O2 activators via Cu(II) peroxo-complexes is discussed. A mechanism for autocatalytic oxidation of Cu(I)−thiolates promoted by a growing electronically coupled −[CuI2(RSSR)]n− polymer is suggested. The obtained results are in line with other reported observations regarding copper-catalyzed autoxidation of thiols and provide new insight into these complicated, not yet fully understood systems. The proposed hypotheses point to the importance of the Cu(I)−disulfide interaction, which may have a profound impact on biological systems.

Fluorescence "Turn-Off" and Colorimetric Sensor for Fe2+, Fe3+, and Cu2+ Ions Based on a 2,5,7-Triarylimidazopyridine Scaffold

Two cyanoimidazopyridine-based sensors (SS1 and SS2) were explored for the colorimetric and fluorometric detection of Fe2+, Fe3+, and Cu2+ ions in the semi-aqueous medium. The "turn-off" fluorescence response of both sensors to these ions was due to the restriction in internal charge transfer. Job's plot and semi-empirical calculations revealed that SS1 and SS2 complexed with Cu2+ ions in a 1:1 ratio and Fe2+/3+ ions in a 2:1 ratio, respectively. The sensors were found to have high binding constant (K a) values and low detection limit values. FMO analysis using the semi-empirical quantum mechanics method revealed the decrease in energy gap after complexation with metal ions. Sensor-coated filter paper strips were prepared and analyzed, where the color changes in the strips could be utilized for the real-time detection of Fe2+, Fe3+, and Cu2+ ions.

Synthesis and crystal structures of two tri- and tetra-heterometallic Ni(ii)–Mn(ii)/Ni(ii)–Co(iii) complexes from two different Ni(ii)-containing metalloligands: effective catalytic oxidase activity and Schottky device approach

The development of tri- and tetra-nuclear heterometallic Ni(ii)–Mn(ii)/Ni(ii)–Co(iii) complexes with effective catalytic oxidase activity and the Schottky device approach.

Tris(Imidazolyl) Dicopper(I) Complex and its Reactivity to Exert Catalytic Oxidation of Sterically Hindered Phenol Substrates via a [Cu2O]2+ Core

The Cu ion ligated with histidine residues is a common active site motif of various Cu-containing metalloenzymes exerting versatile catalytic oxidation reactions. Due to the scarce of structurally characterized biomimetic...

Pentanuclear MII–MnII (M = Ni and Cu) complexes of N2O2 donor ligands with a variation of carboxylate anions: syntheses, structures, magnetic properties and catecholase-like activities

One NiII2MnII3 and two CuII2MnII3 complexes have been synthesized using N2O2 donor ligands. The former complex exhibits spin crossover at 2 K temperature. All the complexes exhibit catecholase-like activities.

Colorimetric determination of cysteine and copper based on the peroxidase-like activity of Prussian blue nanocubes

Prussian blue nanocubes were synthesized via a hydrothermal method. Significantly, the redox couple Ni3+/Ni2+ provided rich oxidation and reduction reactions, which enhance catalytic activity. Furthermore, PBNCs mimic peroxidase activity which could oxidise colourless tetramethyl benzidine (TMB) to a blue colour (TMB+) in the presence of H2O2. Thus, it can be used as a colorimetric sensing platform for detecting cysteine and Cu2+. The addition of cysteine to a TMB + PBNCs sensing system decreases the intensity of the blue colour in the solution with a decrease in the absorption peak at 652 nm in the UV visible spectrum. Subsequently, the addition of Cu2+ into the TMB + PBNCs + Cys sensing system increases the intensity of the blue colour due to complex formation of Cu and cysteine. Therefore, the change in intensity of the blue colour of TMB is directly proportional to the concentration of Cys and Cu2+. As a result, this sensing system is highly sensitive and selective with an effective low detection limit of 0.002 mM for cysteine and 0.0181 mM for Cu2+. Furthermore, this method was applied to the detection of cysteine and copper in spiked real samples and gave satisfactory results.

A chromophore-supported structural and functional model of dinuclear copper enzymes, for facilitating mechanism of action studies

Type III dicopper centres are the heart of the reactive sites of enzymes that catalyze the oxidation of catechols. Numerous synthetic model complexes have been prepared to uncover the fundamental chemistry involved in these processes, but progress is still lagging much behind that for heme enzymes. One reason is that the latter gain very much from the informative spectroscopic features of their porphyrin-based metal-chelating ligand. We now introduce sapphyrin-chelated dicopper complexes and show that they may be isolated in different oxidation states and coordination geometries, with distinctive colors and electronic spectra due to the heme-like ligands. The dicopper(i) complex 1-Cu2 was characterized by ¹H and ¹⁹F NMR spectroscopy of the metal-chelating sapphyrin, the oxygenated dicopper(ii) complex 1-Cu2O2 by EPR, and crystallographic data was obtained for the tetracopper(ii)-bis-sapphyrin complex [1-Cu2O2]2. This uncovered a non-heme [Cu₄(OH)₄]⁴⁻ cluster, held together with the aid of two sapphyrin ligands, with structural features reminiscent of those of catechol oxidase. Biomimetic activity was demonstrated by the 1-Cu2O2 catalyzed aerobic oxidation of catechol to quinone; the sapphyrin ligand aided very much in gaining information about reactive intermediates and the rate-limiting step of the reaction.

Di-copper chelation by sapphyrin facilitates reaction mechanism investigations and characterization of reactive intermediates regarding biomimetic catechol oxidation.

Catechol oxidation promoted by bridging phenoxo moieties in a bis(μ-phenoxo)-bridged dicopper(ii) complex

A dinuclear copper(ii) complex [Cu₂(papy)₂(CH₃OH)₂] has been synthesized by reaction of one equiv. of Cu(OAc)₂·2H₂O with one equiv. of the tetradentate tripodal ligand H₂papy [N-(2-hydroxybenzyl)-N-(2-picolyl)glycine] and has been characterized by various spectroscopic techniques and its solid state structure has been confirmed by X-ray crystal structure analysis. The single-crystal structure of the complex reveals that the two copper centers are hexa-coordinated and bridged by two O-atoms of the phenoxo moieties. The variable temperature magnetic susceptibility measurement of the complex reveals weak ferromagnetic interactions among the Cu(ii) ions with a J value of 1.1 cm⁻¹. The catecholase activity of the complex has been investigated spectrophotometrically using 3,5-di-tert-butyl catechol as a model substrate in methanol solvent under aerobic conditions. The Michaelis–Menten kinetic treatment has been applied using different excess substrate concentrations. The parameters obtained from the catecholase activity by the complex are K_M 2.97 × 10⁻⁴ M, V_max 2 × 10⁻⁴ M s⁻¹, and k_cat 7.2 × 10³ h⁻¹. A reaction mechanism has been proposed based on experimental findings and theoretical calculations. The catechol substrate binds to dicopper(ii) centers and subsequently two electrons are transferred to the metal centers from the substrate. The bridging phenoxo moieties participate as a Brønsted base by accepting protons from catechol during the catalytic cycle and thereby facilitating the catechol oxidation process.

A bis(μ-phenoxo)-bridged dicopper(ii) complex capable of oxidizing catechol with the highest efficiency amongst any bis(μ-phenoxo)-bridged dicopper(ii) complexes is reported.

Effect of structural variation on enzymatic activity in tetranuclear (Cu4) clusters with defective cubane core

The stimulus to the modeling of enzyme functioning sites comes from their potential to give insight into the natural enzyme's mechanistic pathways, ascertain the role of that different metal ion in the active site and construct better catalysts motivated by nature. The presence of metal ion leads to the activation of molecular oxygen in the metalloenzymes. The metalloenzymes such as the catechol oxidase (CO) enzyme that oxidizes the catechol to corresponding quinones which eventually protect damage tissues from plant and pathogen. Thus, the design and characterization of catalysts used as selectively and efficiently oxidation reactions have grown to be unique challenges for modern inorganic chemists. In this work, two novel tetranuclear complexes (1 and 2) have been synthesized in excellent yield. The complexes were characterized using various spectroscopic techniques such as FTIR, UV-Visible and PXRD pattern. The structure of 1 and 2 was elucidated by SC-XRD (single crystal X-ray diffraction) analysis. The magnetic study reveals the presence of the antiferromagnetic nature of 1 and 2. Both 1 and 2 shows a very good catecholase-like activity by oxidizing the catechol to analogous quinone in methanolic solution. Thus, a structure-activity relationship can further help us design other substituted tetranuclear complexes with enhanced catecholase like activity.Communicated by Ramaswamy H. Sarma.

Vanadium aminophenolates in catechol oxidation: conformity with Finke's common catalyst hypothesis

Six known aminophenolate vanadium complexes V1-V6 were examined in 3,5-di-tert-butylcatechol (1, 3,5-DTBC) oxidation. From the complexes V1-V5 have been previously shown to demonstrate catechol oxidase (catecholase) like behavior, catalytically oxidizing 1 to 3,5-di-tert-butyl-1,2-benzoquinone (2, 3,5-DTBQ). A critical re-evaluation of V1-V5, including V6 not assessed earlier, in the aerobic oxidation of 1 has revealed that several catechol dioxygenase products are obtained in addition to 2, which is produced partly by autoxidation. Mechanistic investigations into the V1-V6 catalyzed oxidation of 1 by EPR, negative mode ESI-MS and 51V NMR, in addition to semi-quantitative product distribution analyses with GC and column chromatography afford compelling evidence in support of the "common catalyst hypothesis" earlier proposed by Finke and co-workers. During the reaction, V1-V6 are partially converted in situ by H2O2 assisted leaching to vanadium catecholate complexes [V(3,5-DTBC)2(3,5-DTBSQ˙)] and [VO(3,5-DTBC)(3,5-DTBSQ˙)], where 3,5-DTBSQ˙ = 3,5-di-tert-butyl-1,2-semiquinone, the latter of which has been implicated as the common true active catalyst in catechol dioxygenation as per the common catalyst hypothesis. The results herein suggest that vanadium aminophenolate complexes are sensitive to H2O2 mediated leaching in the presence of strong σ and π donating ligands such as 1 and 2. Furthermore, based on these results, the use of vanadium aminophenolate complexes as catechol oxidase mimics is not as warranted as previously understood.

Structure, DFT studies and evaluation of catechol oxidase (CO) mimic activity of mononuclear Co(II) complexes derived from aminoalcohols: an experimental and theoretical approach

The impetus to modeling of enzyme mimics comes from their potential to provide insight to the alternate mechanistic pathways of the native enzymes. The present study demonstrates the syntheses and characterization of two different cobalt(II) complexes, [Co(pdm)(Phen)Cl]Cl·H₂O (1) and [Co(pmmH)₂(SCN)₂] (2) with the aminoalcohol ligands such as pyridine-2,6-dimethanol (pdmH₂) or 2-pyridinemonomethanol (pmmH) and their assessment as catechol oxidase (CO) enzyme mimic. Single Crystal X-ray diffraction and powder X-ray diffraction data suggest the octahedral environment around the Co(II) ion and the complexes form extensive 1D or 2D propagating network as a result of non-covalent interactions (O···H and C-H···π). TD-DFT calculations were used to explain the spectral bands obtained during the UV-Vis absorption studies and it is ascertained that the transitions were mainly of the intra-ligand charge transfer (ILCT) type. The catecholase biomimetic catalytic activity of the synthesized complexes has been investigated in detail and the kinetics is also performed. The results obtained show that both the complexes catalyze the aerobic oxidation of catechol to the corresponding o-quinone. The K_cat value for 1 is 106.99 h^‒1 and for 2 is 90.32 h^‒1 in methanol. It may be mentioned here that 1 and 2 are effective catalysts, with the order of activity being 1 > 2. The order of enzymatic activity is well justified by CV and DFT studies.Communicated by Ramaswamy H. Sarma.

Synthesis of Ni(ii)-Mn(ii) complexes using a new mononuclear Ni(ii) complex of an unsymmetrical N2O3 donor ligand: structures, magnetic properties and catalytic oxidase activity

A new Ni(ii) complex [NiL] (complex 1) of an asymmetrically di-condensed N₂O₃ donor Schiff base ligand, N-salicylidene-N'-3-methoxysalicylidene-1,3-propanediamine (H₂L), has been synthesized and utilized for the synthesis of three heterometallic complexes, [(NiL)₂Mn(NCS)₂(CH₃OH)₂]·CH₃OH (2) [(NiL)₂Mn(N(CN)₂)₂(CH₃OH)₂]·CH₃OH (3) and [(NiL)₂Mn₂(N₃)₂(μ_1,1-N₃)₂(CH₃OH)₂] (4). Single crystal X-ray diffraction analyses show that complexes 2 and 3 have linear trinuclear structures where two tridentate O₃ donor (NiL) units are coordinated to the central octahedral Mn(ii) centre, whereas complex 4 has a centrosymmetric tetranuclear structure where two binuclear (NiL)Mn units are linked via two phenoxido and two μ_1,1-N₃ bridges. Among the heterometallic complexes (2-4), only 4 is active towards the catalytic oxidation of 3,5-di-tert-butylcatechol to the corresponding quinone. The turnover number for the aerobic oxidation of 3,5-DTBC is 935 h^-1. ESI-mass spectra have been recorded to scrutinize the mechanistic pathway of this catalytic reaction. Variable temperature magnetic susceptibility measurements suggest that complexes 2-4 are antiferromagnetically coupled with coupling constants (J) of -4.84 and -5.23 cm^-1 for complexes 2 and 3, respectively and J₁ = -2.20 cm^-1, J₂ = 1.13 cm^-1 and J₃ = -1.12 cm^-1 for complex 4. DFT calculations have been used to rationalize the magnetic super-exchange in complexes 2-4, by computing the theoretical coupling constants and analyzing the spin density plots.

A Copper-Containing Polyoxometalate-Based Metal-Organic Framework as an Efficient Catalyst for Selective Catalytic Oxidation of Alkylbenzenes

A copper-containing polyoxometalate-based metal-organic framework (POMOF), Cu^I₁₂Cl₂(trz)₈[HPW₁₂O₄₀] (HENU-7, HENU = Henan University; trz = 1,2,4-triazole), has been successfully synthesized and well-characterized. In addition, the excellent catalytic ability of HENU-7 has been proved by the selective oxidation of diphenylmethane. Under the optimal conditions, the diphenylmethane conversion obtained over HENU-7 is 96%, while the selectivity to benzophenone is 99%, which outperforms most noble-metal-free POM-based catalysts. Moreover, HENU-7 is stable to reuse for five runs without an obvious loss in activity and also can catalyze the oxidation of different benzylic C-H with satisfactory conversions and selectivities, which implied the significant catalytic activity and recyclability.

Synthesis and crystal structure of catena-poly[[tetra-μ-acetato-copper(II)]-μ-6-eth-oxy-N 2,N 4-bis-[2-(pyridin-2-yl)eth-yl]-1,3,5-triazine-2,4-di-amine]

The title compound, [Cu2(C19H23N7O)(C2H3O2)4] n , was obtained via reaction of copper(II) acetate with the coordinating ligand, 6-eth-oxy-N 2,N 4-bis-[2-(pyridin-2-yl)eth-yl]-1,3,5-triazine-2,4-di-amine. The crystallized product adopts the monoclinic P21/c space group. The metal core exhibits a paddle-wheel structure typical for dicopper tetra-acetate units, with triazine and pyridyl nitro-gen atoms from different ligands coordinating to the two axial positions of the paddle wheel in an asymmetric manner. This forms a coordination polymer with the segments of the polymer created by the c-glide of the P21/c setting of the space group. The resulting chains running along the c-axis direction are held together by intra-molecular N-H⋯O hydrogen bonding. These chains are further packed by dispersion forces, producing an extended three-dimensional structure.