Modifying the liquid/liquid interface: pores, particles and deposition

Emission Control by Molecular Manipulation of Double-Paddled Binuclear PtII Complexes at the Air-Water Interface

Molecular functions depend on conformations and motions of the corresponding molecular species. An air-water interface is a suitable asymmetric field for the control of molecular conformations and motions under a small applied force. In this work, double-paddled binuclear Pt^II complexes containing pyrazole rings linked by alkyl spacers were synthesized and their orientations and emission properties dynamically manipulated at the air-water interface. The complexes emerge from water with concurrent variation of interface orientation of the planes of the Pt^II complexes from perpendicular to parallel during mechanical compression suggesting a unique 'submarine emission'. Phosphorescence of the complexes is quenched at the air-water interface prior to monolayer formation with intensities subsequently rapidly increasing during monolayer compression. These results indicate that asymmetric reactions and motions might be controlled by applying mechanical force at the air-water interface.

Cation and anion electrochemically assisted solid-state transformations of malachite green

The possibility of the electrochemical promotion of different solid-to-solid transformations including the performance of successive cation and anion insertion processes has been tested using malachite green, a triphenylmethane dye, in contact with aqueous NaCl electrolyte. Electrochemical data using the voltammetry of microparticles methodology reveal significant differences with the solution phase electrochemistry of the dye. Voltammetric data, combined with atomic force microscopy, focusing ion beam-field emission scanning electron microscopy, and high-resolution field emission scanning electron microscopy permit characterization of the oxidative dissolution, oxidation with anion insertion, reduction with cation insertion and reduction with anion issue processes, whose thermochemical aspects, involving separate ion and electron transport contributions, are discussed.

ZIF-8 nanoparticles thin film at an oil–water interface as an electrocatalyst for the methanol oxidation reaction without the application of noble metals

Monodispersed and nano-sized ZIF-8 was synthesized at an oil–water interface for the first time and applied as an electrocatalyst for the methanol oxidation reaction in an alkaline medium.

Electrodeposition of Gold Nanostructures at the Interface of a Pickering Emulsion

The controlled electrodeposition of nanoparticles at the surface of an emulsion droplet offers enticing possibilities in regards to the formation of intricate structures or fine control over the locus or duration of nanoparticle growth. In this work we develop electrochemical control over the spontaneous reduction of aqueous phase Au(III) by heterogeneous electron transfer from decamethylferrocene present in an emulsion droplet - resulting in the growth of nanoparticles. As gold is a highly effective conduit for the passage of electrical current, even on the nanoscale, the deposition significantly enhances the current response for the single electron transfer of decamethylferrocene when acting as a redox indicator. The nanostructures formed at the surface of the emulsion droplets were imaged by cryo-TEM, providing an insight into the types of structures that may form when stabilised by the interface alone, and how the structures are able to conduct electrons.

Investigation of modified nanopore arrays using FIB/SEM tomography

FIB/SEM tomography and energy dispersive X-ray (EDX) spectroscopy are employed to study the interface between two immiscible electrolyte solutions at nanopore arrays, which were electrochemically modified by silica.

Characteristics of nanocrystalline thin films of cadmium sulphide deposited at the water-oil interface

Thin films of nanocrystalline CdS were obtained at the water-toluene interface by reacting cadmium diethyldithiocarbamate in toluene with aq. Na₂S. Three parameters unique to the topical deposition scheme: the effect of column heights, stirring and the action of molecular surfactants are systematically investigated. The obtained nanocrystalline aggregates are characterized by scanning- and transmission electron microscopy, X-ray diffraction and profilometric measurements. Conditions for obtaining smooth device quality thin films have been identified during these experiments.

Synthesis of Gold Nanoparticles Using the Interface of an Emulsion Droplet

A facile and rapid method for synthesizing single crystal gold spherical or platelet (nonspherical) particles is reported. The reaction takes place at the interface of two immiscible liquids where the reducing agent decamethylferrocene (DmFc) was initially added to hexane and gold chloride (AuCl₄^-) to an aqueous phase. The reaction is spontaneous at room temperature, leading to the creation of Au nanoparticles (AuNP). A flow focusing microfluidic chip was used to create emulsion droplets, allowing the same reaction to take place within a series of microreactors. The technique allows the number of droplets, their diameter, and even the concentration of reactants in both phases to be controlled. The size and shape of the AuNP are dependent upon the concentration of the reactants and the size of the droplets. By tuning the reaction parameters, the synthesized nanoparticles vary from nanometer to micrometer sized spheres or platelets. The surfactant used to stabilize the emulsion was also shown to influence the particle shape. Finally, the addition of other nanoparticles within the droplet allows for core@shell particles to be readily formed, and we believe this could be a versatile platform for the large scale production of core@shell particles.

Sinking a Granular Raft

We report experiments that yield new insights on the behavior of granular rafts at an oil-water interface. We show that these particle aggregates can float or sink depending on dimensionless parameters taking into account the particle densities and size and the densities of the two fluids. We characterize the raft shape and stability and propose a model to predict its shape and maximum length to remain afloat. Finally we find that wrinkles and folds appear along the raft due to compression by its own weight, which can trigger destabilization. These features are characteristics of an elastic instability, which we discuss, including the limitations of our model.

Electrochemical Investigation of Adsorption of Single-Wall Carbon Nanotubes at a Liquid/Liquid Interface

There is much interest in understanding the interfacial properties of carbon nanotubes, particularly at water/oil interfaces. Here, the adsorption of single-wall carbon nanotubes (SWCNTs) at the water/1,2-dichloroethane (DCE) interface, and the subsequent investigation of the influence of the adsorbed nanotube layer on interfacial ion transfer, is studied by using the voltammetric transfer of tetramethylammonium (TMA+) and hexafluorophosphate (PF6-) as probe ions. The presence of the interfacial SWCNT layer significantly suppresses the transfer of both ions across the interface, with a greater degree of selectivity towards the PF6- ion. This effect was attributed both to the partial blocking of the interface by the SWCNTs and to the potential dependant adsorption of background electrolyte ions on the surface of the SWCNTs, as confirmed by X-ray photoelectron spectroscopy, which is caused by an electrostatic interaction between the interfacial SWCNTs and the transferring ion.

Over 75% incident-photon-to-current efficiency without solid electrodes

The highest IPCE value recorded for nanoparticles electrically decoupled from solid electrodes is presented. The highly versatile concept underpinning this work, based on polarizable interfaces between two immiscible electrolyte solutions, can be extended to a wide range of photoactive colloidal systems.

Bisferrocenyl-functionalized pseudopeptides: access to separated ionic and electronic contributions for electrochemical anion sensing

Pseudopeptidic receptors containing ferrocene fragments have been prepared and their response to a series of anions was measured by a voltammetry of microparticles methodology.

Dendritic nanofibers of gold formed by the electron transfer at the interface between water and a highly hydrophobic ionic liquid

Novel nanostructures, dendritic nanofibers of gold, have been found to be formedviaan electron-transfer reaction at the ionic liquid–water interface, instead of the more conventional oil–water interface.

Recent developments in electrochemistry at the interface between two immiscible electrolyte solutions for ion sensing

The most recent developments on electrochemical sensing of ions at the liquid–liquid interface are reviewed here.

Fabrication of metal nanoelectrodes by interfacial reactions

Despite great improvements in the past decades, the controllable fabrication of metal nanoelectrodes still remains very challenging. In this work, a simple and general way to fabricate metal nanoelectrodes (Ag, Au, and Pt) is developed. On the basis of interfacial reactions at nano-liquid/liquid interfaces supported at nanopipettes, the nanoparticles can be formed in situ and have been used to block the orifices of pipettes to make nanoelectrodes. The effect of the driving force for interfacial reaction at the liquid/liquid interface, the ratio of redox species in organic and aqueous phases, and the surface charge of the inner wall of a pipette have been studied. The fabricated nanoelectrodes have been characterized by scanning electron microscopy (SEM) and electrochemical techniques. A silver electrode with about 10 nm in radius has been employed as the scanning electrochemical microscopy (SECM) probe to explore the thickness of a water/nitrobenzene (W/NB) interface, and this value is equal to 0.8 ± 0.1 nm (n = 5). This method of fabrication of nanoelectrodes can be extended to other metal or semiconductor electrodes.

Composite PET membrane with nanostructured Ag/AgTCNQ Schottky junctions: electrochemical nanofabrication and charge-transfer properties

Large-area nanostructured Ag/Ag-tetracyanoquinodimethane (TCNQ) Schottky junctions are fabricated electrochemically on a mesoporous polyethylene terephthalate (PET) membrane-supported water/1, 2-dichloroethane (DCE) interface. When the interface is polarized, Ag(+) ions transfer across the PET membrane from the aqueous phase and are reduced to form metallic Ag on the PET membrane, which reacts further with tetracyanoquinodimethane (TCNQ) in the DCE phase to form nanostructured Ag/AgTCNQ Schottky junctions. Once the mesoporous membrane is blocked by metallic Ag, a bipolar mechanism is proposed to explain the successive growth of AgTCNQ nanorods and Ag film on each side of the PET membrane. Due to the well-formed nanostructure of Ag/AgTCNQ Schottky junctions, the direct electrochemical behavior is observed, which is essential to explain the physicochemical mechanism of its electric performance. Moreover, the composite PET membrane with nanostructured Ag/AgTCNQ Schottky junctions is tailorable and can be assembled directly into electric devices without any pretreatment.

In situ X-ray studies of adlayer-induced crystal nucleation at the liquid-liquid interface

Crystal nucleation and growth at a liquid-liquid interface is studied on the atomic scale by in situ Å-resolution X-ray scattering methods for the case of liquid Hg and an electrochemical dilute electrolyte containing Pb(2+), F(-), and Br(-) ions. In the regime negative of the Pb amalgamation potential Φ(rp) = -0.70 V, no change is observed from the surface-layered structure of pure Hg. Upon potential-induced release of Pb(2+) from the Hg bulk at Φ > Φ(rp), the formation of an intriguing interface structure is observed, comprising a well-defined 7.6-Å-thick adlayer, decorated with structurally related 3D crystallites. Both are identified by their diffraction peaks as PbFBr, preferentially aligned with their axis along the interface normal. X-ray reflectivity shows the adlayer to consist of a stack of five ionic layers, forming a single-unit-cell-thick crystalline PbFBr precursor film, which acts as a template for the subsequent quasiepitaxial 3D crystal growth. This growth behavior is assigned to the combined action of electrostatic and short-range chemical interactions.

Simple Ion Transfer at Liquid|Liquid Interfaces

The main aspects related to the charge transfer reactions occurring at the interface between two immiscible electrolyte solutions (ITIES) are described. The particular topics to be discussed involve simple ion transfer. Focus is given on theoretical approaches, numerical simulations, and experimental methodologies. Concerning the theoretical procedures, different computational simulations related to simple ion transfer are reviewed. The main conclusions drawn from the most accepted models are described and analyzed in regard to their relevance for explaining different aspects of ion transfer. We describe numerical simulations implementing different approaches for solving the differential equations associated with the mass transport and charge transfer. These numerical simulations are correlated with selected experimental results; their usefulness in designing new experiments is summarized. Finally, many practical applications can be envisaged regarding the determination of physicochemical properties, electroanalysis, drug lipophilicity, and phase-transfer catalysis.

Strategies for the fabrication of porous platinum electrodes

Porous platinum is of high technological importance due to its various applications in fuel cells, sensors, stimulation electrodes, mechanical actuators and catalysis in general. Based on a discussion of the general principles behind the reduction of platinum salts and corresponding deposition processes this article discusses techniques available for platinum electrode fabrication. The numerous, different strategies available to fabricate platinum electrodes are reviewed and discussed in the context of their tuning parameters, strengths and weaknesses. These strategies comprise bottom-up approaches as well as top-down approaches. In bottom-up approaches nanoparticles are synthesized in a fi rst step by chemical, photochemical or sonochemical means followed by an electrode formation step by e.g. thin fi lm technology or network formation to create a contiguous and conducting solid electrode structure. In top-down approaches fabrication starts with an already conductive electrode substrate. Corresponding strategies enable the fabrication of substrate-based electrodes by e.g. electrodeposition or the fabrication of self-supporting electrodes by dealloying. As a further top-down strategy, this review describes methods to decorate porous metals other than platinum with a surface layer of platinum. This way, fabrication methods not performable with platinum can be applied to the fabrication of platinum electrodes with the special benefit of low platinum consumption.

Growth of nanocrystals and thin films at the water-oil interface

The use of the water-oil interface provides significant advantages in the synthesis of inorganic nanostructures. Employing the water-toluene interface, luminescent CdS nanocrystals have been obtained at a relatively modest temperature of 35 degrees C. The diameters of the particulates can be varied between 1.0 and 5.0 nm. In addition, we have devised a new method for transferring thin films at the water-toluene interface onto solid substrates. Using this method, thin films consisting of Au and Ag nanocrystals spread over very large areas (square centimetres) are obtained in a single step. These films are directly usable as ingredients of functional devices. We show this by constructing a working amine sensor based on films of Au nanocrystals. The materials obtained have been characterized by X-ray diffraction, scanning and transmission electron microscopy, absorption and emission spectroscopy and charge transport measurements.

Electrodeposition of Metals for Micro- and Nanostructuring at Interfaces between Solid, Liquid and Gaseous Conductors: Dendrites, Whiskers and Nanoparticles

Electrodeposition of a metal requires the reduction of metal ions by electrons and can in principle occur at any interface or in any boundary region between two electrically conducting phases with different ionic transference numbers. Here we summarize and review metal deposition at all possible five interfaces: solid|solid (short s|s), liquid|liquid (l|l), solid|liquid (s|l), solid|gas (s|g), liquid|gas (l|g), emphasizing processes at less studied interfaces. Cathodic deposition of a metal from a liquid electrolyte (s|l interface) is the most typical case and forms the basis of numerous applied galvanic processes. The equivalent deposition of a metal on a solid electrolyte (s|s interface) is much less usual, but phenomenologically identical. The deposition processes of a metal at the interface between two liquid electrolytes, or between a gaseous conductor and either a solid or a liquid conductor form three other possible situations. Examples for these five general cases (the s|l interface is only briefly treated) are reviewed and discussed with respect to the growth kinetics and the product morphology. Nano-sized memory devices, switches, electron beam induced formation of metals on solid electrolytes and plasma-cathodic metal deposition from ionic liquids, where in the first place the very low vapour pressure of ionic liquids facilitates the application of low-temperature plasmas, are discussed as possible new and unusual applications of electrochemical metal deposition.