Structure-Activity Optimization of Luminescent Tb-doped LaF3 Nanoparticles

A series of Tb-doped LaF3 nanoparticles (NPs) was prepared by systematically varying the Tb doping rate from 0 to 100%. The elemental composition was confirmed by inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis, and the size, morphology, and crystal structure were determined in the solid state by transmission electron microscopy and X-ray diffractometry, while the size and ζ-potential of the NPs in solution were studied by dynamic light scattering, Taylor dispersion analysis, and laser Doppler electrophoresis. While the crystal structure appears to be hexagonal for a doping rate of up to 70%, an admixture of hexagonal and orthorhombic phases is observed for 80 and 90% Tb contents with a pure orthorhombic phase being obtained for TbF3. The spectroscopic properties of the NPs were studied for bare NPs and in the presence of dipicolinic acid as a surface-capping antenna ligand in solution. The coverage of the NPs by the ligand resulted in an increase in the luminescence lifetime of the emitting Tb centers, as a consequence of a better protection toward luminescence quenching from water molecules, as well as a large improvement in the brightness of the NPs. Taking into account the various parameters, a doping rate of 40% Tb was shown to be the best compromise for the development of such NPs for bioanalytical applications.

Near-Infrared-Responsive Rare Earth Nanoparticles for Optical Imaging and Wireless Phototherapy

Near-infrared (NIR) light is well-suited for the optical imaging and wireless phototherapy of malignant diseases because of its deep tissue penetration, low autofluorescence, weak tissue scattering, and non-invasiveness. Rare earth nanoparticles (RENPs) are promising NIR-responsive materials, owing to their excellent physical and chemical properties. The 4f electron subshell of lanthanides, the main group of rare earth elements, has rich energy-level structures. This facilitates broad-spectrum light-to-light conversion and the conversion of light to other forms of energy, such as thermal and chemical energies. In addition, the abundant loadable and modifiable sites on the surface offer favorable conditions for the functional expansion of RENPs. In this review, the authors systematically discuss the main processes and mechanisms underlying the response of RENPs to NIR light and summarize recent advances in their applications in optical imaging, photothermal therapy, photodynamic therapy, photoimmunotherapy, optogenetics, and light-responsive drug release. Finally, the challenges and opportunities for the application of RENPs in optical imaging and wireless phototherapy under NIR activation are considered.

Versatile Types of Inorganic/Organic NIR-IIa/IIb Fluorophores: From Strategic Design toward Molecular Imaging and Theranostics

In vivo imaging in the second near-infrared window (NIR-II, 1000-1700 nm), which enables us to look deeply into living subjects, is producing marvelous opportunities for biomedical research and clinical applications. Very recently, there has been an upsurge of interdisciplinary studies focusing on developing versatile types of inorganic/organic fluorophores that can be used for noninvasive NIR-IIa/IIb imaging (NIR-IIa, 1300-1400 nm; NIR-IIb, 1500-1700 nm) with near-zero tissue autofluorescence and deeper tissue penetration. This review provides an overview of the reports published to date on the design, properties, molecular imaging, and theranostics of inorganic/organic NIR-IIa/IIb fluorophores. First, we summarize the design concepts of the up-to-date functional NIR-IIa/IIb biomaterials, in the order of single-walled carbon nanotubes (SWCNTs), quantum dots (QDs), rare-earth-doped nanoparticles (RENPs), and organic fluorophores (OFs). Then, these novel imaging modalities and versatile biomedical applications brought by these superior fluorescent properties are reviewed. Finally, challenges and perspectives for future clinical translation, aiming at boosting the clinical application progress of NIR-IIa and NIR-IIb imaging technology are highlighted.

Role of heat treatment on the structural and luminescence properties of Yb3+/Ln3+ (Ln = Tm, Ho and Er) co-doped LaF3 nanoparticles

Hexagonal LaF₃:Yb³⁺/Ln³⁺ and tetragonal LaOF:Yb³⁺/Ln³⁺ (Ln = Ho, Tm, Er) have been successfully prepared via a two-step reaction, which includes a facile aqueous ligand free solution method and the following heat treatment of the as-prepared LaF₃ precursor. The phase formation evolution from LaF₃ to LaOF with different phase structures was characterized by X-ray diffraction (XRD), scanning electron microscopy, Fourier transform infrared, and Raman spectroscopy. At an annealing temperature of 500 °C pure hexagonal LaF₃:Yb³⁺/Ln³⁺ (Ln = Ho, Tm, Er) nanoparticles with an average size of 32 nm were obtained and they showed a strong visible upconversion and a modest infrared emission upon 976 nm laser excitation. Further, using an annealing temperature of 900 °C, tetragonal LaOF:Yb³⁺/Ln³⁺ (Ln = Ho, Tm, Er) nanoparticles with a size of around 44 nm were obtained (obtained from XRD) and an expressive enhancement in the emission of the VIS and near-infrared regions was observed. These results envision applications that require efficient emissions such as fluorescent and thermal images, and LaF₃ nanocrystals have recently been widely explored for applications in biological systems.

Recent Advances in Rare-Earth-Doped Nanoparticles for NIR-II Imaging and Cancer Theranostics

Fluorescence imaging in the second near infrared window (NIR-II, 1,000-1,700 nm) has been widely used in cancer diagnosis and treatment due to its high spatial resolution and deep tissue penetration depths. In this work, recent advances in rare-earth-doped nanoparticles (RENPs)-a novel kind of NIR-II nanoprobes-are presented. The main focus of this study is on the modification of RENPs and their applications in NIR-II in vitro and in vivo imaging and cancer theranostics. Finally, the perspectives and challenges of NIR-II RENPs are discussed.

Lanthanide nanoparticles with efficient near-infrared-II emission for biological applications

We discuss designing efficient NIR-II-emitting lanthanide NPs and summarize their recent progress in bioimaging, therapy, and biosensing, as well as their limitations and future opportunities.

Stable gadolinium based nanoscale lyophilized injection for enhanced MR angiography with efficient renal clearance

There is a great demand to develop high-relaxivity nanoscale contrast agents for magnetic resonance (MR) angiography with high resolution. However, there should be more focus on stability, ion leakage and excretion pathway of the intravenously injected nanoparticles, which are closely related to their clinic potentials. Herein, uniform ultrasmall-sized NaGdF₄ nanocrystal (sub-10 nm) was synthesized using a facile high temperature organic solution method, and the nanocrystals were modified by a ligand-exchange approach using PEG-PAA di-block copolymer. The PEG-PAA modified NaGdF₄ nanocrystal (denoted as ppNaGdF₄ nanocrystal) exhibited a high r₁ relaxivity which was twice of commercially used gadopentetate dimeglumine (Gd-DTPA) injection. MR angiography on rabbit using ppNaGdF₄ nanocrystal at a low dose showed enhanced vascular details and long circulation time. Lyophilized powder of ppNaGdF₄ nanocrystals have been successfully prepared without aggregation or reduction of MR performance, indicating the stability and an effective way to store this nanoscale contrast agent. No haemolysis was induced by ppNaGdF₄ nanocrystal, and an extremely low leakage of gadolinium ions was confirmed. Furthermore, efficient renal excretion was one of the clearance pathways of ppNaGdF₄ nanocrystal according to both the time dependent distribution data in blood and tissues and MR images. The in vivo toxicity evaluation further validated the great potential as a clinical agent for blood pool imaging.

Future prospects of luminescent nanomaterial based security inks: from synthesis to anti-counterfeiting applications

Counterfeiting of valuable documents, currency and branded products is a challenging problem that has serious economic, security and health ramifications for governments, businesses and consumers all over the world. It is estimated that counterfeiting represents a multi-billion dollar underground economy with counterfeit products being produced on a large scale every year. Counterfeiting is an increasingly high-tech crime and calls for high-tech solutions to prevent and deter the acts of counterfeiting. The present review briefly outlines and addresses the key challenges in this area, including the above mentioned concerns for anti-counterfeiting applications. This article describes a unique combination of all possible kinds of security ink formulations based on lanthanide doped luminescent nanomaterials, quantum dots (semiconductor and carbon based), metal organic frameworks as well as plasmonic nanomaterials for their possible use in anti-counterfeiting applications. Moreover, in this review, we have briefly discussed and described the historical background of luminescent nanomaterials, basic concepts and detailed synthesis methods along with their characterization. Furthermore, we have also discussed the methods adopted for the fabrication and design of luminescent security inks, various security printing techniques and their anti-counterfeiting applications.

Sensitized luminescence from water-soluble LaF3:Eu nanocrystals via partially-capped 1,10-phenanthroline: time-gated emission and multiple lifetimes

Novel LaF₃:Eu(5%) nanocrystals containing partially-capped 1,10-phenanthroline ligands have been obtained, which display intense phen-sensitized europium emission in water and multiple lifetimes from Eu³⁺-dopant sites.

An insight into functionalized calcium based inorganic nanomaterials in biomedicine: Trends and transitions

Over the recent years the use of biocompatible and biodegradable nanoparticles in biomedicine has become a significant priority. Calcium based ceramic nanoparticles like calcium phosphate (CaP) and calcium carbonate (CaCO3) are therefore considered as attractive carriers as they are naturally present in human body with nanosize range. Their application in tissue engineering and localized controlled delivery of bioactives for bones and teeth is well established now, but recently their use has increased significantly as carrier of bioactives through other routes also. These delivery systems have become most potential alternatives to other commonly used delivery system because of their cost effectiveness, biodegradability, chemical stability, controlled and stimuli responsive behaviour. This review comprehensively covers their characteristic features, method of preparation and applications but the thrust is to focus their recent development, functionalization and use in systemic delivery. On the same platform mineralization of other nanoparticulate delivery system which has widened their application drug delivery will be discussed. The emphasis has been given on their pH dependent properties which make them excellent carriers for tumour targeting and intracellular delivery. Finally this review also attempts to discuss their drawback which limits their clinical utility.

Europium-doped LaF3nanocrystals with organic 9-oxidophenalenone capping ligands that display visible light excitable steady-state blue and time-delayed red emission

Visible light excitable 9-oxidophenalenone-coated LaF₃:Eu NCs display steady-state blue and time-delayed red emission; capping ligands act as probes to reveal three different Eu³⁺sites with distinct emission properties.

Lanthanide upconversion nanoparticles and applications in bioassays and bioimaging: a review

Through the process of photon upconversion, trivalent lanthanide doped nanocrystals convert long-wavelength excitation radiation in the infrared or near infrared region to higher energy emission radiation from ultraviolet to infrared. Such materials offer potential for numerous advantages in analytical applications in comparison to molecular fluorophores and quantum dots. The use of IR radiation as an excitation source reduces autofluorescence and scattering of excitation radiation, which leads to a reduction of background in optical experiments. The upconverting nanocrystals offer excellent photostability and are composed of materials that are not particularly toxic to biological organisms. Excitation at long wavelengths also minimizes damage to biological materials. In this review, the different mechanisms responsible for the upconversion process, and methods that are used to synthesize and decorate upconverting nanoparticles are presented to indicate how absorption and emission can be tuned. Examples of recent applications of upconverting nanoparticles in bioassays for the detection of proteins, nucleic acids, metabolites and metal ions offer indications of analytical advantages in the development of methods of analysis. Examples include multi-color and multi-modal imaging, and the use of upconverting nanoparticles in theranostics.

Neodymium-doped LaF(3) nanoparticles for fluorescence bioimaging in the second biological window

The future perspective of fluorescence imaging for real in vivo application are based on novel efficient nanoparticles which is able to emit in the second biological window (1000-1400 nm). In this work, the potential application of Nd(3+) -doped LaF(3) (Nd(3+) :LaF(3) ) nanoparticles is reported for fluorescence bioimaging in both the first and second biological windows based on their three main emission channels of Nd(3+) ions: (4) F(3/2) →(4) I(9/2) , (4) F(3/2) →(4) I(11/2) and (4) F(3/2) →(4) I(13/2) that lead to emissions at around 910, 1050, and 1330 nm, respectively. By systematically comparing the relative emission intensities, penetration depths and subtissue optical dispersion of each transition we propose that optimum subtissue images based on Nd(3+) :LaF(3) nanoparticles are obtained by using the (4) F3/2 →(4) I11/2 (1050 nm) emission band (lying in the second biological window) instead of the traditionally used (4) F(3/2) →(4) I(9/2) (910 nm, in the first biological window). After determining the optimum emission channel, it is used to obtain both in vitro and in vivo images by the controlled incorporation of Nd(3+) :LaF(3) nanoparticles in cancer cells and mice. Nd(3+) :LaF(3)nanoparticles thus emerge as very promising fluorescent nanoprobes for bioimaging in the second biological window.

Structural, spectroscopic and cytotoxicity studies of TbF3@CeF3 and TbF3@CeF3@SiO2 nanocrystals

ABSTRACT

Terbium fluoride nanocrystals, covered by a shell, composed of cerium fluoride were synthesized by a co-precipitation method. Their complex structure was formed spontaneously during the synthesis. The surface of these core/shell nanocrystals was additionally modified by silica. The properties of TbF₃@CeF₃ and TbF₃@CeF₃@SiO₂ nanocrystals, formed in this way, were investigated. Spectroscopic studies showed that the differences between these two groups of products resulted from the presence of the SiO₂ shell. X-ray diffraction patterns confirmed the trigonal crystal structure of TbF₃@CeF₃ nanocrystals. High resolution transmission electron microscopy in connection with energy-dispersive X-ray spectroscopy showed a complex structure of the formed nanocrystals. Crystallized as small discs, 'the products', with an average diameter around 10 nm, showed an increase in the concentration of Tb³⁺ ions from surface to the core of nanocrystals. In addition to photo-physical analyses, cytotoxicity studies were performed on HSkMEC (Human Skin Microvascular Endothelial Cells) and B16F0 mouse melanoma cancer cells. The cytotoxicity of the nanomaterials was neutral for the investigated cells with no toxic or antiproliferative effect in the cell cultures, either for normal or for cancer cells. This fact makes the obtained nanocrystals good candidates for biological applications and further modifications of the SiO₂ shell.

Core/shell NaGdF4:Nd(3+)/NaGdF4 nanocrystals with efficient near-infrared to near-infrared downconversion photoluminescence for bioimaging applications

We have synthesized core/shell NaGdF(4):Nd(3+)/NaGdF(4) nanocrystals with an average size of 15 nm and exceptionally high photoluminescence (PL) quantum yield. When excited at 740 nm, the nanocrystals manifest spectrally distinguished, near-infrared to near-infrared (NIR-to-NIR) downconversion PL peaked at ∼900, ∼1050, and ∼1300 nm. The absolute quantum yield of NIR-to-NIR PL reached 40% for core-shell nanoparticles dispersed in hexane. Time-resolved PL measurements revealed that this high quantum yield was achieved through suppression of nonradiative recombination originating from surface states and cross relaxations between dopants. NaGdF(4):Nd(3+)/NaGdF(4) nanocrystals, synthesized in organic media, were further converted to be water-dispersible by eliminating the capping ligand of oleic acid. NIR-to-NIR PL bioimaging was demonstrated both in vitro and in vivo through visualization of the NIR-to-NIR PL at ∼900 nm under incoherent lamp light excitation. The fact that both excitation and the PL of these nanocrystals are in the biological window of optical transparency, combined with their high quantum efficiency, spectral sharpness, and photostability, makes these nanocrystals extremely promising as optical biomaging probes.

The unexpected structures of "core-shell" and "alloy" LnF3 nanoparticles as examined by variable energy X-ray photo-electron spectroscopy

Lanthanide fluoride nanoparticles were synthesized in aqueous media using procedures intended for a core-shell structure of Ln((1))F(3)-Ln((2))F(3), its reverse architecture, and an alloy structure. Their structures were examined by variable photon energy photo-electron spectroscopy using synchrotron radiation, along with X-ray powder diffractometry, transmission electron microscopy, energy dispersive X-ray spectroscopy, and luminescence spectroscopy. The results show that the nanoparticles intended for a core-shell structure do not have a core-shell structure, and that nanoparticles intended for an alloy structure do not always have an alloy structure. A possible explanation for this is cation exchange, a phenomenon that occurs when LnF(3) nanoparticles are exposed to another Ln(3+) ion in aqueous media, resulting in Ln(3+) ions in nanoparticles being quickly replaced by Ln(3+) ions in solution. This cation exchange effectively competes with the precipitation of LnF(3), which leads to a concentration gradient in the case of the combination of LaF(3) and GdF(3), and to nearly an alloy structure (isotropic mixture of all the ions) in the case of the combination of LaF(3) and NdF(3), regardless of the procedure used. Finally, the intended "core-shell" nanoparticles were doped with Eu(3+) to show that a non-core-shell structure can also give rise to the improvement of optical properties as compared with the corresponding core nanoparticles. These results suggest that conclusions in the literature that a core-shell structure was obtained as inferred by TEM or enhanced luminescence may not be correct.

Bimodal Fluorescence and Magnetic Resonance Imaging Using Water-Soluble Hexagonal NaYF4:Ce,Tb,Gd Nanocrystals

The present study explored the feasibility of using hexagonal-phase NaYF4:Ce,Tb,Gd nanocrystals as bimodal probes for fluorescence and magnetic resonance (MR) imaging. Using a facile and user-friendly strategy, the NaYF4:Ce,Tb,Gd nanocrystals were synthesized with good water dispensability, high quantum yield (26%), and decent MRT1relaxivity (r1=2.87 mM−1 s−1). The NaYF4:Ce,Tb,Gd NCs conjugated by folic acid presented great efficiency in fluorescence imaging of C6 glioma cellsin vitro. Meanwhile, inin vivoMR experiments on rats, the NaYF4:Ce,Tb,Gd NCs also significantly increasedT1signal in the liver, spleen, and kidney even with a low probe dose. The proposed NaYF4:Ce,Tb,Gd nanoprobes hold promise for simultaneous bimodal fluorescence and MR bioimaging.

Poly (acrylic acid)-capped lanthanide-doped BaFCl nanocrystals: synthesis and optical properties

Water-soluble lanthanide-doped BaFCl nanophosphors with the surface functionalized by a layer of poly (acrylic acid) are synthesized via a facile one-step solvothermal method. Intense long-lived luminescence is realized from visible to near-infrared (NIR) by doping with different lanthanide ions. The emission and excitation spectra of Eu(3+) indicate that the doped lanthanide ions occupy a site close to the surface of the nanoparticles. Strong NIR emissions of Nd(3+) and green luminescence of Tb(3+) using Ce(3+) as sensitizers are also achieved in BaFCl nanoparticles. The synthesized nanoparticles featuring long-lived luminescence in either visible or NIR regions may have potential applications as luminescent labels for biological applications.

Surface modification of upconverting NaYF4 nanoparticles with PEG-phosphate ligands for NIR (800 nm) biolabeling within the biological window

We present a technique for the replacement of oleate with a PEG-phosphate ligand [PEG = poly(ethylene glycol)] as an efficient method for the generation of water-dispersible NaYF(4) nanoparticles (NPs). The PEG-phosphate ligands are shown to exchange with the original oleate ligands on the surface of the NPs, resulting in water-dispersible NPs. The upconversion intensity of the NPs in aqueous environments was found to be severely quenched when compared to the original NPs in organic solvents. This is attributed to an increase in the multiphonon relaxations of the lanthanide excited state in aqueous environments due to high energy vibrational modes of water molecules. This problem could be overcome partially by the synthesis of core/shell NPs which demonstrated improved photophysical properties in water over the original core NPs. The PEG-phosphate coated upconverting NPs were then used to image a line of ovarian cancer cells (CaOV3) to demonstrate their promise in biological application.

Luminescence Decay Dynamics and Trace Biomaterials Detection Potential of Surface-Functionalized Nanoparticles

We have studied the luminescence decay and trace biomaterials detection potential of two surface-functionalized nanoparticles, poly(ethylene glycol) bis(carboxymethyl) ether-coated LaF(3):Ce,Tb (~20 nm) and thioglycolic acid-coated ZnS/Mn (~5 nm). Upon UV excitation, these nanoparticles emitted fluorescence peaking at 540 and 597 nm, respectively, in solution. Fluorescence imaging revealed that these nanoparticles targeted the trace biomaterials from fingerprints that were deposited on various nonporous solid substrates. Highly ordered, microscopic sweat pores within the friction ridges of the fingerprints were labeled with good spatial resolutions by the nanoparticles on aluminum and polymethylpentene substrates, but not on glass or quartz. In solution, these nanoparticles exhibited multicomponent fluorescence decays of resolved lifetimes ranging from nano-to microseconds and of average lifetimes of ~24 and 130 micros for the coated LaF(3):Ce,Tb and ZnS:Mn, respectively. The long microsecond-decay components are associated with the emitters at or near the nanocrystal core surface that are sensitive to the size, surface-functionalization, and solvent exposure of the nanoparticles. When the nanoparticles were bound to the surface of a solid substrate and in the dried state, a decrease in the microsecond decay lifetimes was observed, indicative of a change in the coating environment of the nanocrystal surface upon binding and solvent removal. The average decay lifetimes for the surface-bound ZnS:Mn in the dried state were ~60, 30, and 11 micros on quartz, aluminum, and polymethylpentene, respectively. These values were still 2 orders of magnitude longer than the typical fluorescence decay background of most substrates (e.g., ~0.36 micros for polymethylpentene) in trace forensic evidence detections. We conclude that coated ZnS: Mn nanoparticles hold great promise as a nontoxic labeling agent for ultrasensitive, time-gated, trace evidence detections in nanoforensic applications.

One-step synthesis of highly water-soluble LaF(3):Ln(3+) nanocrystals in methanol without using any ligands

Water-soluble infrared-to-visible fluorescent LaF(3) nanocrystals doped with different lanthanide ions (Er(3+)/Yb(3+), Eu(3+), Nd(3+), Tb(3+)) have been synthesized in methanol without using any ligands. These nanocrystals are easily dispersed in water, producing a transparent colloidal solution. The colloids of the Er(3+)/Yb(3+), Eu(3+), Nd(3+), Tb(3+) doped nanocrystals exhibit strong luminescence in the visible and near-infrared spectral regions.