The structure of nanotubes formed by diphenylalanine, the core recognition motif of Alzheimer's β-amyloid polypeptide

Au(I) complexes installed on a self-assembled peptide efficiently catalyze intramolecular cyclization reactions

Self-assembled peptides are used for diverse applications in the biomedical and technological fields. The morphology and function of the assembled systems are dictated by the peptide sequence and length. In this work, a supramolecular catalyst was obtained upon self-assembly of the diphenylalanine peptide conjugated to a triphenylphosphine Au(I) complex in acetonitrile. The assembled molecules were characterized by spectroscopic techniques and by scanning electron microscopy. The activity of the catalyst was tested on two substrates in cyclization reactions. The morphology and the dimensions of the assembled systems vary depending on the presence of a carboxyl versus an amide C-terminal end. The catalyst efficiently promotes intramolecular cyclization reactions. Results obtained encourage the use of self-assembled peptides for the obtainment of new and efficient catalysts.

Peptide hydrogen-bonded organic frameworks

Hydrogen-bonded porous frameworks (HPFs) are versatile porous crystalline frameworks with diverse applications. However, designing chiral assemblies or biocompatible materials poses significant challenges. Peptide-based hydrogen-bonded porous frameworks (P-HPFs) are an exciting alternative to conventional HPFs due to their intrinsic chirality, tunability, biocompatibility, and structural diversity. Flexible, ultra-short peptide-based P-HPFs (composed of 3 or fewer amino acids) exhibit adaptable porous topologies that can accommodate a variety of guest molecules and capture hazardous greenhouse gases. Longer, folded peptides present challenges and opportunities in designing P-HPFs. This review highlights recent developments in P-HPFs using ultra-short peptides, folded peptides, and foldamers, showcasing their utility for gas storage, chiral recognition, chiral separation, and medical applications. It also addresses design challenges and future directions in the field.

Supramolecular Hydrogels and Water Channels of Differing Diameters from Dipeptide Isomers

Dipeptides stereoisomers and regioisomers composed of norleucine (Nle) and phenylalanine (Phe) self-assemble into hydrogels under physiological conditions that are suitable for cell culture. The supramolecular behavior, however, differs as the packing modes comprise amphipathic layers or water channels, whose diameter is defined by either four or six dipeptide molecules. A variety of spectroscopy, microscopy, and synchrotron-radiation-based techniques unveil fine details of intermolecular interactions that pinpoint the relationship between the chemical structure and ability to form supramolecular architectures that define soft biomaterials.

Conformational preference of dipeptide zwitterions in aqueous solvents

Proper description of solvent effects is challenging for theoretical methods, particularly if the solute is a zwitterion. Here, a series of theoretical procedures are used to determine the preferred solvated conformations of twelve hydrophobic dipeptides (Leu-Leu, Leu-Phe, Phe-Leu, Ile-Leu, Phe-Phe, Ala-Val, Val-Ala, Ala-Ile, Ile-Ala, Ile-Val, Val-Ile and Val-Val) in the zwitterionic state. First, the accuracy of density functional theory (DFT), combined with different implicit solvent models, for describing zwitterions in aqueous solvent is assessed by comparing the predicted against the experimental glycine tautomerization energy, i.e., the energetic difference between canonical and zwitterionic glycine in aqueous solvents. It is found that among the tested solvation schemes, the charge-asymmetric nonlocally determined local-electric solvation model (CANDLE) predicts an energetic difference in excellent agreement with the experimental value. Next, DFT-CANDLE is used to determine the most favorable solvated conformation for each of the investigated dipeptide zwitterions. The CANDLE-solvated structures are obtained by exploring the conformational space of each dipeptide zwitterion concatenating DFT calculations, in vacuum, with classical molecular dynamics simulations, in explicit solvents, and DFT calculations including explicit water molecules. It is found that the energetically most favorable conformations are similar to those of the dipeptide zwitterions in their respective crystal structures. Such structural agreement is indicative of the DFT-CANDLE accomplishment of the description of solvated zwitterions, and suggests that these biomolecules self-assemble as quasi-rigid objects.

Protein Nanotubes as Advanced Material Platforms and Delivery Systems

Protein nanotubes (PNTs) as state-of-the-art nanocarriers are promising for various potential applications both in the food and pharmaceutical industries. Derived from edible starting sources like α-lactalbumin, lysozyme, and ovalbumin, PNTs bear properties of biocompatibility and biodegradability. Their large specific surface area and hydrophobic core facilitate chemical modification and loading of bioactive substances, respectively. Moreover, their enhanced permeability and penetration ability across biological barriers such as intestinal mucus, extracellular matrix, and thrombus clot, make it promising platforms for health-related applications. Most importantly, their simple preparation processes enable large-scale production, supporting applications in the biomedical and nanotechnological fields. Understanding the self-assembly principles is crucial for controlling their morphology, size, and shape, and thus provides the ground to a multitude of applications. Here, the current state-of-the-art of PNTs including their building materials, physicochemical properties, and self-assembly mechanisms are comprehensively reviewed. The advantages and limitations, as well as challenges and prospects for their successful applications in biomaterial and pharmaceutical sectors are then discussed and highlighted. Potential cytotoxicity of PNTs and the need of regulations as critical factors for enabling in vivo applications are also highlighted. In the end, a brief summary and future prospects for PNTs as advanced platforms and delivery systems are included.

De novo designed aliphatic and aromatic peptides assemble into amyloid-like cytotoxic supramolecular nanofibrils

Peptides are very interesting biomolecules that upon self-association form a variety of thermodynamically stable supramolecular structures of nanometric dimension e.g. nanotubes, nanorods, nanovesicles, nanofibrils, nanowires and many others. Herein, we report six peptide molecules having a general chemical structure, H-Gaba-X-X-OH (Gaba: γ-aminobutyric acid, X: amino acid). Out of these six peptides, three are aromatic and the others are aliphatic. Atomic force microscopic (AFM) studies reveal that except peptide 6 (H-Gaba-Trp-Trp-OH), all the reported peptides adopt nanofibrillar morphology upon aggregation in aqueous medium. These supramolecular assemblies can recognize amyloid-specific molecular probe congo red (CR) and thioflavine t (ThT) and exhibit all the characteristic properties of amyloids. The MTT cell viability assay reveals that the toxicity of both aliphatic and aromatic peptides increases with increasing concentration of the peptides to both cancer (HeLa) and non-cancer (HEK 293) cells. Of note, the aromatic peptides show a slightly higher cytotoxic effect compared to the aliphatic peptides. Overall, the studies highlight the self-assembling nature of the de novo designed aliphatic and aromatic peptides and pave the way towards elucidating the intricacies of pathogenic amyloid assemblies.

New Insight into the Structural Nature of Diphenylalanine Nanotube through Comparison with Amyloid Assemblies

Diphenylalanine (FF) nanotubes are a star material in the field of peptide self-assembly and have demonstrated numerous intriguing applications. Due to its resemblance to amyloid assembly, the FF nanotube is widely regarded as a simplified mimic of amyloids. Yet, whether FF nanotube truly possesses amyloid structure remains an open question. To better understand the structural nature of FF nanotube, we herein performed a comparative structural investigation between FF nanotube and typical amyloid systems by Aβ1-40, Aβ1-42, Aβ16-22, Aβ13-23, α-synuclein, and lysozyme using Fourier transform infrared spectroscopy. Through this comparative investigation, we obtained clear evidence to support that the FF nanotube does not possess a β-sheet structure, a key structural characteristic of amyloid assembly, thus revealing the non-amyloid structural nature of the FF nanotube. At last, in light of our new finding, we further discussed the unique self-assembly behaviors of FF during nanotube formation and the implications of our work for FF nanotube related applications.

Structural and vibrational analysis of glycyl-L-phenylalanine and phase transition under high-pressure

The structural and vibrational properties of the glycyl-L-phenylalanine dipeptide were investigated using vibrational spectroscopy (Raman and infrared) and first-principle calculations. Raman spectroscopy measurements were performed between 100 and 3200 cm-1 and infrared spectroscopy from 100 and 3200 cm-1 under ambient conditions. The conformational analysis of the zwitterionic form of the dipeptide was performed using the B3LYP functional, the 6-311++ base set and the Polarizable Continuum Model of solvation, determining the lowest energy conformation and assigning the vibrational modes. The effect of pressure on the glycyl-1-phenylalanine crystal was investigated using the Raman spectroscopy between 0.0 and -7.1 GPa in the spectral region of 100 - 3200 cm-1. As a result, conformational changes around 1.0 GPa were observed in the lattice modes and in some internal modes, showing a reorganization of the molecule in the crystal. In the decompression process, it was observed that the conformational change is reversible and the original Raman spectrum is recoverd.

Development of fluorophores for the detection of oligomeric aggregates of amyloidogenic proteins found in neurodegenerative diseases

Alzheimer's disease and Parkinson's disease are the two most common neurodegenerative diseases globally. These neurodegenerative diseases have characteristic late-stage symptoms allowing for differential diagnosis; however, they both share the presence of misfolded protein aggregates which appear years before clinical manifestation. Historically, research has focused on the detection of higher-ordered aggregates (or amyloids); however, recent evidence has shown that the oligomeric state of these protein aggregates plays a greater role in disease pathology, resulting in increased efforts to detect oligomers to aid in disease diagnosis. In this review, we summarize some of the exciting new developments towards the development of fluorescent probes that can detect oligomeric aggregates of amyloidogenic proteins present in Alzheimer's and Parkinson's disease patients.

Photocontrolled Reversibly Chiral-Ordered Assembly Based on Cucurbituril

Chirality transfer and regulation, accompanied by morphology transformation, arouse widespread interest for application in materials and biological science. Here, a photocontrolled supramolecular chiral switch is fabricated from chiral diphenylalanine (l-Phe-l-Phe, FF) modified with naphthalene (2), achiral dithienylethene (DTE) photoswitch (1), and cucurbit[8]uril (CB[8]). Chirality transfer from the chiral FF moiety of 2 to a charge-transfer (CT) heterodimer consisting of achiral guest 1 and achiral naphthalene (NP) in 2 has been unprecedented achieved via the encapsulation of CB[8]. On the contrary, chirality transfer from chiral FF to NP cannot be conducted in only guest 2. Crucially, induced circular dichroism of the heterodimer can be further modulated by distinct light, attributing to reversible photoisomerization of the DTE. Meanwhile, topological nanostructures are changed from one-dimensional (1D) nanofibers to two-dimensional (2D) nanosheets in the orderly assembling process of the heterodimer, which further achieved reversible interconversion between 2D nanosheets and 1D nanorods with tunable-induced chirality stimulated by diverse light.

Advancements in Biosensors Based on the Assembles of Small Organic Molecules and Peptides

Over the past few decades, molecular self-assembly has witnessed tremendous progress in a variety of biosensing and biomedical applications. In particular, self-assembled nanostructures of small organic molecules and peptides with intriguing characteristics (e.g., structure tailoring, facile processability, and excellent biocompatibility) have shown outstanding potential in the development of various biosensors. In this review, we introduced the unique properties of self-assembled nanostructures with small organic molecules and peptides for biosensing applications. We first discussed the applications of such nanostructures in electrochemical biosensors as electrode supports for enzymes and cells and as signal labels with a large number of electroactive units for signal amplification. Secondly, the utilization of fluorescent nanomaterials by self-assembled dyes or peptides was introduced. Thereinto, typical examples based on target-responsive aggregation-induced emission and decomposition-induced fluorescent enhancement were discussed. Finally, the applications of self-assembled nanomaterials in the colorimetric assays were summarized. We also briefly addressed the challenges and future prospects of biosensors based on self-assembled nanostructures.

Atomic Insight on Inhibition of Fibrillization of Dipeptides by Replacement of Phenylalanine with Tryptophan

Tryptophan (Trp) conjugates destabilize amyloid fibrils responsible for amyloidoses. However, the mechanism of such destabilization is obscure. Herein the self-assembly of four synthesized Trp-containing dipeptides Boc-xxx-Trp-OMe (xxx: Val, Leu, Ile, and Phe) has been investigated and compared with the existing report on their Phe congeners. Two among them are the C-terminal tryptophan analogs of Boc-Val-Phe-OMe (VF, Aβ_18-19) and Boc-Phe-Phe-OMe (FF, Aβ_19-20), part of the central hydrophobic region of amyloid-β (Aβ_1-42). While Boc-Val-Trp-OMe (VW), Boc-Leu-Trp-OMe (LW), Boc-Ile-Trp-OMe (IW), and Boc-Phe-Trp-OMe (FW) displayed a spherical morphology in FESEM and AFM images, the corresponding phenylalanine-containing dipeptides displayed various fibrous structures. Single-crystal X-ray diffraction (SC-XRD) indicated that peptides VW and IW exhibited structures containing parallel β-sheet, cross-β-structure, sheet-like layer structure, and helical arrangement in the solid state. Interestingly, peptide FW displayed inverse γ-turn conformation (similar to open-turn structure), antiparallel β-sheet structure, columnar structure, supramolecular nanozipper structure, sheet-like layer arrangement, and helical architecture in the solid state. The open-turn conformation and nanozipper structure formation by FW may be the first example of a dipeptide that forms such structures. The minute but consistent differences in molecular packing at the atomic level between Trp and Phe congeners may be responsible for their remarkably different supramolecular structure generation. This molecular-level structural analysis may be helpful for the de novo design of peptide nanostructures and therapeutics. Similar studies by the Debasish Haldar group are reported, but they investigated the inhibition of fibrillization of dipeptides by tyrosine and interactions are expectedly different.

Effect of the spacer on the structure and self-assembly of FF peptide mimetics

We have designed and synthesized a series of FF peptide mimetics with conformationally rigid and flexible spacers to study the effect of spacers on their structure and self-assembly. The results help in understanding biomolecular aggregation and provide a strategy to obtain fractal pattern materials. From X-ray single crystal analysis, the m-diaminobenzene appended FF peptide mimetic adopts a duplex structure stabilized by multiple intermolecular hydrogen bonds. There is also a water molecule bridging between two strands of the duplex. Moreover, the duplex is stabilized by three face-to-face, face-to-edge and edge-to-edge π-π interactions. The duplex formation is also supported by mass spectrometry. In higher order packing, the dimeric subunits further self-assembled to form a complex sheet-like structure stabilized by multiple intermolecular hydrogen bonding and π-π stacking interactions. Moreover, the 1,4-butadiene and m-xylylenediamine appended FF peptide mimetics form stimuli-responsive organogels in a wide range of solvents including methanol. The rheology data of FF peptide mimetic gels as a function of angular frequency and oscillatory strain also supported the formation of strong physically crosslinked gels. The FE-SEM images of the xerogels obtained from different organic solvents show that the network morphology of FF peptide mimetics varies depending on the nature of the solvents.

Identification of heterochirality-mediated stereochemical interactions in peptide architectures

In this work, we illustrate a strategy for constructing heterochiral peptide architectures with distinct structural, mechanical and thermal characteristics. A series of nanotube structures based on diphenylalanine (FF) and its chiral derivatives were examined. Pronounced effects relating to heterochirality on mechanostability and thermal stability can be identified. The homochiral peptide FF and its enantiomer ff formed nanotubes with high thermal and mechanical stabilities (Young's modulus: 20.3 ± 5.9 GPa for FF and 21.2 ± 4.7 GPa for ff). In contrast, heterochiral nanotubes formed by Ff and fF manifest superstructures along the axial direction with differed thermal and mechanical strength (Young's modulus: 7.3 ± 2.4 GPa for Ff and 8.3 ± 2.1 GPa for fF). Combining their single-crystal XRD structure and in silico results, it was demonstrated that the spatial orientations of aromatic moieties were subtly changed by heterochirality of peptide building blocks, which led to intramolecular face-to-face interactions. As the result, both intermolecular axial and interchannel interactions in heterochiral nanotubes were weakened as reflected in the strikingly deteriorated mechanical and thermal stabilities. Conversely, two aromatic side chains of the homochiral peptides were staggered and formed interdigitated steric zippers, which served as strong glues that secured the robustness of nanotubes in both axial and radial orientation. Furthermore, the generality of the heterochiral-mediated stereochemical effects was demonstrated in other "FF class" dipeptides, including fluorinated Ff, FW and FL. Our results unequivocally revealed the relationship between amino acid chirality, peptide molecule packing, and physical stabilities of "FF class" dipeptide self-assembled materials and provide valuable molecular insights into chirality-mediated stereochemical interactions in determining the properties of peptide architectures.

Aromatic Zipper Topology Dictates Water-Responsive Actuation in Phenylalanine-Based Crystals

Water-responsive (WR) materials that reversibly deform in response to relative humidity (RH) changes are gaining increasing interest for their potential in energy harvesting and soft robotics applications. Despite progress, there are significant gaps in the understanding of how supramolecular structure underpins the reconfiguration and performance of WR materials. Here, three crystals are compared based on the amino acid phenylalanine (F) that contain water channels and F packing domains that are either layered (F), continuously connected (phenylalanyl-phenylalanine, FF), or isolated (histidyl-tyrosyl-phenylalanine, HYF). Hydration-induced reconfiguration is analyzed through changes in hydrogen-bond interactions and aromatic zipper topology. F crystals show the greatest WR deformation (WR energy density of 19.8 MJ m^-3 ) followed by HYF (6.5 MJ m^-3 ), while FF exhibits no observable response. The difference in water-responsiveness strongly correlates to the deformability of aromatic regions, with FF crystals being too stiff to deform, whereas HYF is too soft to efficiently transfer water tension to external loads.  These findings reveal aromatic topology design rules for WR crystals and provide insight into general mechanisms of high-performance WR actuation. Moreover, the best-performing crystal, F emerges as an efficient WR material for applications at scale and low cost.

Short Peptide Self-Assembly in the Martini Coarse-Grain Force Field Family

ConspectusPivotal to the success of any computational experiment is the ability to make reliable predictions about the system under study and the time required to yield these results. Biomolecular interactions is one area of research that sits in every camp of resolution vs the time required, from the quantum mechanical level to in vivo studies. At an approximate midpoint, there is coarse-grained molecular dynamics, for which the Martini force fields have become the most widely used, fast enough to simulate the entire membrane of a mitochondrion though lacking atom-specific precision. While many force fields have been parametrized to account for a specific system under study, the Martini force field has aimed at casting a wider net with more generalized bead types that have demonstrated suitability for broad use and reuse in applications from protein-graphene oxide coassembly to polysaccharides interactions.In this Account, the progressive (Martini versions 1 through 3) and peripheral (Sour Martini, constant pH, Martini Straight, Dry Martini, etc.) developmental trajectory of the Martini force field will be analyzed in terms of self-assembling systems with a focus on short (two to three amino acids) peptide self-assembly in aqueous environments. In particular, this will focus on the effects of the Martini solvent model and compare how changes in bead definitions and mapping have effects on different systems. Considerable effort in the development of Martini has been expended to reduce the "stickiness" of amino acids to better simulate proteins in bilayers. We have included in this Account a short study of dipeptide self-assembly in water, using all mainstream Martini force fields, to examine their ability to reproduce this behavior. The three most recently released versions of Martini and variations in their solvents are used to simulate in triplicate all 400 dipeptides of the 20 gene-encoded amino acids. The ability of the force fields to model the self-assembly of the dipeptides in aqueoues environments is determined by the measurement of the aggregation propensity, and additional descriptors are used to gain further insight into the dipeptide aggregates.

Silver-Nanoparticle-Embedded Short Amphiphilic Peptide Nanostructures and Their Plausible Application to Reduce Bacterial Infections

The microbiota-gut-brain axis (GBA) plays a critical role in the development of neurodegenerative diseases. Dysbiosis of the intestinal microbiome causes a significant alteration in the gut microbiota of Alzheimer's disease (AD) patients, followed by neuroinflammatory processes. Thus, AD beginning in the gut is closely related to an imbalance in gut microbiota, and hence a multidomain approach to reduce this imbalance by exerting positive effects on the gut microbiota is needed. In one example, a tyrosine-based short peptide amphiphile (sPA) was used to synthesize antibacterial AgNPs-sPA nanostructures. Such nanostructures showed high biocompatibility and low cytotoxicity, and therefore work as model drug delivery agents for addressing local bacterial infections. These may have therapeutic value for the treatment of microbiota-triggered progression of neurodegenerative diseases.

Nanotubes and water-channels from self-assembling dipeptides

Dipeptides are attractive building blocks for biomaterials in light of their inherent biocompatibility, biodegradability, and simplicity of preparation. Since the discovery of diphenylalanine (Phe-Phe) self-assembling ability into nanotubes, research efforts have been devoted towards the identification of other dipeptide sequences capable of forming these interesting nanomorphologies, although design rules towards nanotube formation are still elusive. In this review, we analyze the dipeptide sequences reported thus far for their ability to form nanotubes, which often feature water-filled supramolecular channels as revealed by single-crystal X-ray diffraction, as well as their properties, and their potential biological applications, which span from drug delivery and regenerative medicine, to bioelectronics and bioimaging.

A near-infrared probe for detecting and interposing amyloid beta oligomerization in early Alzheimer's disease

BACKGROUND

The misfolding and deposition of amyloid beta (Aβ) in human brain is the main hallmark of Alzheimer's disease (AD) pathology. One of the drivers of Alzheimer´s pathogenesis is the production of soluble oligomeric Aβ, which could potentially serve as a biomarker of AD.

METHODS

Given that the diphenylalanine (FF) at the C-terminus of Aβ fragments plays a key role in inducing the AD pathology, based on the hydrophobic structure of FF, we synthesized a near-infrared BF2-dipyrrolmethane fluorescent imaging probe (NB) to detect both soluble and insoluble Aβ.

RESULTS

We found that NB not only binds Aβ, particularly oligomeric Aβ, but also interposes self-assembly of Aβ through π-π interaction between NB and FF.

CONCLUSION

This work holds great promise in the early detection of AD and may also provide an innovative approach to decelerate and even halt AD onset and progression.

Influence of central sidechain on self-assembly of glycine-x-glycine peptides

Low molecular weight gelators (LMWGs) are the subject of intense research for a range of biomedical and engineering applications. Peptides are a special class of LMWG, which offer infinite sequence possibilities and, therefore, engineered properties. This work examines the propensity of the GxG peptide family, where x denotes a guest residue, to self-assemble into fibril networks via changes in pH and ethanol concentration. These triggers for gelation are motivated by recent work on GHG and GAG, which unexpectedly self-assemble into centimeter long fibril networks with unique rheological properties. The propensity of GxG peptides to self-assemble, and the physical and chemical properties of the self-assembled structures are characterized by microscopy, spectroscopy, rheology, and X-ray diffraction. Interestingly, we show that the number, length, size, and morphology of the crystalline self-assembled aggregates depend significantly on the x-residue chemistry and the solution conditions, i.e. pH, temperature, peptide concentration, etc. The different x-residues allow us to probe the importance of different peptide interactions, e.g. π-π stacking, hydrogen bonding, and hydrophobicity, on the formation of fibrils. We conclude that fibril formation requires π-π stacking interactions in pure water, while hydrogen bonding can form fibrils in the presence of ethanol-water solutions. These results validate and support theoretical arguments on the propensity for self-assembly and leads to a better understanding of the relationship between peptide chemistry and fibril self-assembly. Overall, GxG peptides constitute a unique family of peptides, whose characterization will aid in advancing our understanding of self-assembly driving forces for fibril formation in peptide systems.

Conformational switch and multiple supramolecular structures of a newly identified self-assembling protein-mimetic peptide from Pseudomonas aeruginosa YeaZ protein

Protein-mimetic peptides (PMPs) are shorter sequences of self-assembling proteins, that represent remarkable building blocks for the generation of bioinspired functional supramolecular structures with multiple applications. The identification of novel aminoacidic sequences that permit the access to valuable biocompatible materials is an attractive area of research. In this work, in silico analysis of the Pseudomonas aeruginosa YeaZ protein (PaYeaZ) led to the identification of a tetradecapeptide that represents the shortest sequence responsible for the YeaZ-YeaZ dimer formation. Based on its sequence, an innovative 20-meric peptide, called PMP-2, was designed, synthesized, and characterized in terms of secondary structure and self-assembly properties. PMP-2 conserves a helical character and self-assembles into helical nanofibers in non-polar solvents (DMSO and trifluoroethanol), as well as in dilute (0.5 mM) aqueous solutions. In contrast, at higher concentrations (>2 mM) in water, a conformational transition from α-helix to β-sheet occurs, which is accompanied by the Protein-mimetic peptide aggregation into 2D-sheets and formation supramolecular gel in aqueous environment. Our findings reveal a newly identified Protein-mimetic peptide that could turn as a promising candidate for future material applications.

Atomistic Pictures of Self-Assembled Helical Peptide Nanofibers

Spontaneous self-assembly of peptides has been at the forefront of supramolecular chemistry and materials science research over the last two decades. Despite the wealth of information on the morphology of the assembled objects, atomic resolution details of molecular arrangements inside them are largely unknown. In this paper, we investigated non-covalent assemblies of zwitterionic l-phenylalanine tripeptides in water using all-atom explicit-solvent molecular dynamics computer simulations. Our studies produced atomistic pictures of spontaneously assembled nanofibers composed of hundreds of peptide molecules. The dimensions of the nanofibers varied from 10 to 18 nm, with irregular helical twists along the long axes. Previously published experimental data, acquired under similar conditions, provided direct validation of the fibrous morphology and indirect support for the non-trivial helicity observed in our simulations. Quantitative analyses of peptide-water and peptide-peptide interactions revealed heterogeneous local environments of molecules across the nanometer length scales. The combination of electrostatic, hydrogen bonding, van der Waals, and hydrophobic interactions, adopted by a single molecule, was dependent on its relative position inside the fiber. Despite the presence of three hydrophobic phenyl groups, very few molecules were found to be completely shielded from the surrounding water, indicating a subtle role of the hydrophobic effect. Limited conformational flexibility of the tripeptide, along with bare electrostatic interactions, appeared to play a crucial role in the emergence of fibrous morphology of the nanostructures. Our analyses led us to formulate plausible qualitative explanations of the assembly behavior in terms of thermodynamic driving forces and kinetic considerations. We established a clear relationship between details of chemical interactions operating within few molecules and characteristics of the self-assembled states at much longer length scales.

Triboelectric Generator Based on Oriented Self-Assembled Peptide Microbelts

Along with piezoelectric nanogenerators, triboelectric nanogenerators (TENGs) collecting energy from mechanical vibrations proved to be simple, low-cost, and efficient sources of electricity for various applications. In view of possible biomedical applications, the search for TENGs made of biomolecular and biocompatible materials is demanding. Diphenylalanine (FF) microstructures are promising for these applications due to their unique characteristics and ability to form various morphologies (microribbons, spherical vesicles, fibrils, micro- and nanotubes, nanorods, etc.). In this work, we developed a contact-separate mode TENG based on arrays of oriented FF microbelts deposited by dip-coating technique and studied their performance under various temperature treatments. We show that these TENGs outperform piezoelectric nanogenerators based on FF microbelts in terms of short-circuit current (I_SC), open-circuit voltage (V_OC), and output power. It was found that bound water captured in FF nanochannels mainly affects V_OC, whereas mobile water increases I_SC. We also found that the cyclization of FF molecules increases the performance of TENG likely due to an increase in surface energy and surface flattening.

Looking into a crystal ball: printing and patterning self-assembled peptide nanostructures

The solution processability of organic semiconductors and conjugated polymers along with the advent of nanomaterials as conducting inks have revolutionized next-generation flexible consumer electronics. Another equally important class of nanomaterials, self-assembled peptides, heralded as next-generation materials for bioelectronics, have a lot of potential in printed technology. In this minireview, we address the self-assembly process in dipeptides, their application in electronics, and recent progress in three-dimensional printing. The prospect of a generalizable path for nanopatterning self-assembled peptides using ice lithography and its challenges are further discussed.

Self-Assembly and Gelation Study of Dipeptide Isomers with Norvaline and Phenylalanine

Dipeptides have emerged as attractive building blocks for supramolecular materials thanks to their low-cost, inherent biocompatibility, ease of preparation, and environmental friendliness as they do not persist in the environment. In particular, hydrophobic amino acids are ideal candidates for self-assembly in polar and green solvents, as a certain level of hydrophobicity is required to favor their aggregation and reduce the peptide solubility. In this work, we analyzed the ability to self-assemble and the gel of dipeptides based on the amino acids norvaline (Nva) and phenylalanine (Phe), studying all their combinations and not yielding to enantiomers, which display the same physicochemical properties, and hence the same self-assembly behavior in achiral environments as those studied herein. A single-crystal X-ray diffraction of all the compounds revealed fine details over their molecular packing and non-covalent interactions.

Three-Dimensional Printing of Dipeptides with Spatioselective Programming of Crystallinity for Multilevel Anticounterfeiting

The functionalities of peptide microstructures and nanostructures can be enhanced by controlling their crystallinity. Gaining control over the crystallinity within the desired structure, however, remains a challenge. We have developed a three-dimensional (3D) printing method that enables spatioselective programming of the crystallinity of diphenylalanine (FF) dipeptide microarchitectures. A femtoliter ink meniscus is used to spatially control reprecipitation self-assembly, enabling the printing of a freestanding FF microstructure with programmed shape and crystallinity. The self-assembly crystallization of FF can be switched on and off at will by controlling the evaporation of the binary solvent. The evaporation-dependent crystallization was theoretically studied by the numerical simulation of supersaturation fields in the meniscus. We found that a 3D-printed FF microarchitecture with spatially programmed crystallinity can carry a 3D digital optical anisotropy pattern, applicable to generating polarization-encoded anticounterfeiting labels. This crystallinity-controlled additive manufacturing will pave the new way for facilitating the creation of peptide-based devices.

Enhancing the optical response and biosensing capabilities of bioinspired peptide micro-waveguides exploiting chromatic aberration

Bioinspired peptide waveguides of mesoscopic length scales have established a new paradigm in photonics with possible applications in precision bioimaging, sensing, and diagnostics. Here, we improve the efficiency of coupling various constituent colors of a white light source into single self-assembled microtube-shaped passive peptide waveguides by employing chromatic aberration. Thus, we use a chromatically aberrated microscope objective lens to couple light into peptide waveguides. Using both numerical simulation and experiments, we show that the waveguide response displays higher quality factor, wavelength selectivity, and axial coupling range compared to a chromatically corrected standard plan-fluoritic objective lens. We also demonstrate absorption and refractive index-based sensing by studying the changes in the optical responses of the peptide tubes in the presence of a wide concentration range of the absorptive Congo red, and the nonabsorptive Coumarin dyes. The former understandably display a much higher response than the latter due to the low finesse of the waveguides. We obtain a detection limit of around 10 nM for Congo red, and 10 mM for Coumarin. Our study opens up possibilities for deploying such peptide microtubes for various biosensing applications utilizing spectral and waveguide characteristics.

ß-Sheet Induced Helical Self-Assembly Structure Formation by Dityrosine Dipeptide: Crystallographic Evidence and Other Biophysical Studies

Self-assembled structures derived from short peptides are a versatile class of organic building blocks which have shown great potential in a wide range of domains. In the current study, side-chain protected dityrosine based short peptide (TP) was synthesized, and its conformation accompanied by a self-assembly pattern was investigated through several spectroscopic studies and single crystal X-ray analysis. The single crystal X-ray analysis of TP confirmed that it exhibited a ß-sheet pattern which further self-assembled to form ß-sheet-promoted helical architectures by various noncovalent interactions. To the best of our knowledge, this is the first crystallographic report of a side-chain protected dityrosine based short peptide adopting ß-sheet-promoted helical structures. Morphological analysis of TP also revealed ß-sheet as well as helical conformations. NMR study suggested that both amide hydrogens of TP are involved in intermolecular hydrogen bonding. Moreover, CD spectroscopy established the self-assembly phenomenon of TP in the solution state by showing both corresponding ß-sheet and α-helix bands. Hirshfeld surface analysis and DFT study also concluded similar results. These kinds of small peptide units mimicking important protein secondary structures like helical assembly would be of pivotal significance as they may act as small peptidomimetics, mimicking the protein "Hotspot" area.

Aromatic interactions directing peptide nano-assembly

Self-assembly is a process of spontaneous organization of molecules as a result of non-covalent interactions. Organized self-assembly at the nano level is emerging as a powerful tool in the bottom-up fabrication of functional nanostructures for targeted applications. Aromatic π-π stacking plays a significant role by facilitating the persistent supramolecular association of individual subunits to the self-assembled structures of high stability. Understanding, the supramolecular chemistry of the materials interacting through aromatic interactions, is of tremendous interest in not only constructing functional materials but also in revealing the mechanism of molecular assembly in living organisms. This chapter aims to focus on understanding the potential role of π-π interactions in directing and regulating the self-assembly of peptide nanostructures. The scope of the chapter starts with an outline of the history and mechanism of the aromatic π-π interactions. It progresses through the design strategy for the assembly of peptides containing aromatic rings, the conditions affecting the aromatic stacking interactions, their resulting nanoassemblies, properties, and applications. The properties and applications of the supramolecular materials formed through the aromatic stacking interactions are highlighted to provide an increased understanding of the role of weak interactions in the design and construction of novel functional materials.

Chirality-Dependent Copper-Diphenylalanine Assemblies with Tough Layered Structure and Enhanced Catalytic Performance

Chiral regulation to prepare functional materials has aroused considerable interest in recent years. However, little is known on the effect of chirality of ligands in the metal-organic coordination assembly process. We report the self-assembly of diphenylalanine peptide (Phe-Phe, FF), the core fragment of Aβ protein, with metal copper ion (Cu²⁺) into metal-organic assemblies with chirality-encoded structures and properties. The chirality-dependent metal-dipeptide assembles with different morphologies and supramolecular chirality were obtained by facile changing of the FF chirality. Single-crystal results indicate that (L)-FF coordinated with Cu²⁺ into a cross-chain structure with a five-coordinated style, while the racemates of (L+D)-FF with Cu²⁺ crystallized into an (L)-Cu²⁺-(D)-Cu²⁺ alternated four-coordinating structure, enabling a higher mechanical and catalytic performance. The Young's modulus of (L+D)-FF-Cu is as high as 34.36 GPa, which is 2.45 times higher than that of (L)-FF-Cu. Furthermore, both of them follow the characteristic enzyme kinetics and show higher catalytic activity than natural laccase at the same mass concentration. Specifically, the calculated catalytic efficiency (k_cat/K_M) of (L+D)-FF-Cu is 1.14 times higher than that of (L)-FF-Cu, and the (L+D)-FF-Cu shows significantly enhanced stability and reusability compared with (L)-FF-Cu. The results reveal that highly functional materials could be constructed by encoding the chirality of molecular building blocks.

Structural Properties of Phenylalanine-Based Dimers Revealed Using IR Action Spectroscopy

Peptide segments with phenylalanine residues are commonly found in proteins that are related to neurodegenerative diseases. However, the self-assembly of phenylalanine-based peptides can be also functional. Peptides containing phenylalanine residues with different side caps, composition, and chemical alteration can form different types of nanostructures that find many applications in technology and medicine. Various studies have been performed in order to explain the remarkable stability of the resulting nanostructures. Here, we study the early stages of self-assembly of two phenylalanine derived peptides in the gas phase using IR action spectroscopy. Our focus lies on the identification of the key intra- and intermolecular interactions that govern the formation of the dimers. The far-IR region allowed us to distinguish between structural families and to assign the 2-(2-amino-2-phenylacetamido)-2-phenylacetic acid (PhgPhg) dimer to a very symmetric structure with two intermolecular hydrogen bonds and its aromatic rings folded away from the backbone. By comparison with the phenylalanine-based peptide cyclic L-phenylalanyl-L-phenylalanine (cyclo-FF), we found that the linear FF dimer likely adopts a less ordered structure. However, when one more phenylalanine residue is added (FFF), a more structurally organized dimer is formed with several intermolecular hydrogen bonds.

Structures of synthetic helical filaments and tubes based on peptide and peptido-mimetic polymers

Synthetic peptide and peptido-mimetic filaments and tubes represent a diverse class of nanomaterials with a broad range of potential applications, such as drug delivery, vaccine development, synthetic catalyst design, encapsulation, and energy transduction. The structures of these filaments comprise supramolecular polymers based on helical arrangements of subunits that can be derived from self-assembly of monomers based on diverse structural motifs. In recent years, structural analyses of these materials at near-atomic resolution (NAR) have yielded critical insights into the relationship between sequence, local conformation, and higher-order structure and morphology. This structural information offers the opportunity for development of new tools to facilitate the predictable and reproduciblede novodesign of synthetic helical filaments. However, these studies have also revealed several significant impediments to the latter process – most notably, the common occurrence of structural polymorphism due to the lability of helical symmetry in structural space. This article summarizes the current state of knowledge on the structures of designed peptide and peptido-mimetic filamentous assemblies, with a focus on structures that have been solved to NAR for which reliable atomic models are available.

Molecular Dynamics Simulation Study of the Self-Assembly of Phenylalanine Peptide Nanotubes

In this paper, we propose and use a new approach for a relatively simple technique for conducting MD simulation (MDS) of various molecular nanostructures, determining the trajectory of the MD run and forming the final structure using external force actions. A molecular dynamics manipulator (MD manipulator) is a controlled MDS type. As an example, the applicability of the developed algorithm for assembling peptide nanotubes (PNT) from linear phenylalanine (F or Phe) chains of different chirality is presented. The most adequate regimes for the formation of nanotubes of right chirality D from the initial L-F and nanotubes of left chirality L of their initial dipeptides D-F modes were determined. We use the method of a mixed (vector–scalar) product of the vectors of the sequence of dipole moments of phenylalanine molecules located along the nanotube helix to calculate the magnitude and sign of chirality of self-assembled helical phenylalanine nanotubes, which shows the validity of the proposed approach. As result, all data obtained correspond to the regularity of the chirality sign change of the molecular structures with a hierarchical complication of their organization.

Structural control in the nanoassembly of the tungsten and molybdenum dithiolene complex analog

A strategy for precisely tuning the self-assembly of tungsten and molybdenum dithiolene complexes to nanoflowers and nanopolyhedra is put forward.

Self-Assembling Peptides: From Design to Biomedical Applications

Self-assembling peptides could be considered a novel class of agents able to harvest an array of micro/nanostructures that are highly attractive in the biomedical field. By modifying their amino acid composition, it is possible to mime several biological functions; when assembled in micro/nanostructures, they can be used for a variety of purposes such as tissue regeneration and engineering or drug delivery to improve drug release and/or stability and to reduce side effects. Other significant advantages of self-assembled peptides involve their biocompatibility and their ability to efficiently target molecular recognition sites. Due to their intrinsic characteristics, self-assembled peptide micro/nanostructures are capable to load both hydrophobic and hydrophilic drugs, and they are suitable to achieve a triggered drug delivery at disease sites by inserting in their structure's stimuli-responsive moieties. The focus of this review was to summarize the most recent and significant studies on self-assembled peptides with an emphasis on their application in the biomedical field.

Dipeptide Nanostructure Assembly and Dynamics via in Situ Liquid-Phase Electron Microscopy

In this paper, we report the in situ growth of FF nanotubes examined via liquid-cell transmission electron microscopy (LCTEM). This direct, high spatial, and temporal resolution imaging approach allowed us to observe the growth of peptide-based nanofibrillar structures through directional elongation. Furthermore, the radial growth profile of FF nanotubes through the addition of monomers perpendicular to the tube axis has been observed in real-time with sufficient resolution to directly observe the increase in diameter. Our study demonstrates that the kinetics, dynamics, structure formation, and assembly mechanism of these supramolecular assemblies can be directly monitored using LCTEM. The performance of the peptides and the assemblies they form can be verified and evaluated using post-mortem techniques including time-of-flight secondary ion mass spectrometry (ToF-SIMS).

Modeling of Self-Assembled Peptide Nanotubes and Determination of Their Chirality Sign Based on Dipole Moment Calculations

The chirality quantification is of great importance in structural biology, where the differences in proteins twisting can provide essentially different physiological effects. However, this aspect of the chirality is still poorly studied for helix-like supramolecular structures. In this work, a method for chirality quantification based on the calculation of scalar triple products of dipole moments is suggested. As a model structure, self-assembled nanotubes of diphenylalanine (FF) made of L- and D-enantiomers were considered. The dipole moments of FF molecules were calculated using semi-empirical quantum-chemical method PM3 and the Amber force field method. The obtained results do not depend on the used simulation and calculation method, and show that the D-FF nanotubes are twisted tighter than L-FF. Moreover, the type of chirality of the helix-like nanotube is opposite to that of the initial individual molecule that is in line with the chirality alternation rule general for different levels of hierarchical organization of molecular systems. The proposed method can be applied to study other helix-like supramolecular structures.

Systematic Method for the Exploration, Representation, and Classification of the Diphenylalanine Solvatomorphic Space

An understanding of the conditions that govern the self-assembly process of peptides is a fundamental step toward the design of new nanostructures that possess interesting properties. In this work, we first synthesize and explore extensively diphenylalanine (FF) self-assembling crystals formed in different solvents (i.e., solvatomorphs) using polarized optical microscopy and transmission electron microscopy. Then, we develop a numerical method that allows an unambiguous classification of the solvatomorphs through a K-means automatic clustering method. In addition, we generate a two-dimensional (2D) representation of the solvatomorphic space together with the clustering results via a principal component analysis (PCA). The classification is based on structural similarities of solvatomorphs as revealed by the analysis of their respective infrared spectra. Among the 20 samples considered, 4 clear clusters are extracted within which the compounds show very similar crystalline structures. The information extracted allows us to assign many of the peaks that appear in the complex IR spectra of the samples considered. The implementation of the overall procedure we propose, i.e., "GAULOIS" and "REFRACT-R", is transferable to other types of spectra and paves the way for a systematic, fast, and accurate classification method applicable to various types of experimental spectroscopic data.

Synthesis, Characterization and Evaluation of Peptide Nanostructures for Biomedical Applications

There is a challenging need for the development of new alternative nanostructures that can allow the coupling and/or encapsulation of therapeutic/diagnostic molecules while reducing their toxicity and improving their circulation and in-vivo targeting. Among the new materials using natural building blocks, peptides have attracted significant interest because of their simple structure, relative chemical and physical stability, diversity of sequences and forms, their easy functionalization with (bio)molecules and the possibility of synthesizing them in large quantities. A number of them have the ability to self-assemble into nanotubes, -spheres, -vesicles or -rods under mild conditions, which opens up new applications in biology and nanomedicine due to their intrinsic biocompatibility and biodegradability as well as their surface chemical reactivity via amino- and carboxyl groups. In order to obtain nanostructures suitable for biomedical applications, the structure, size, shape and surface chemistry of these nanoplatforms must be optimized. These properties depend directly on the nature and sequence of the amino acids that constitute them. It is therefore essential to control the order in which the amino acids are introduced during the synthesis of short peptide chains and to evaluate their in-vitro and in-vivo physico-chemical properties before testing them for biomedical applications. This review therefore focuses on the synthesis, functionalization and characterization of peptide sequences that can self-assemble to form nanostructures. The synthesis in batch or with new continuous flow and microflow techniques will be described and compared in terms of amino acids sequence, purification processes, functionalization or encapsulation of targeting ligands, imaging probes as well as therapeutic molecules. Their chemical and biological characterization will be presented to evaluate their purity, toxicity, biocompatibility and biodistribution, and some therapeutic properties in vitro and in vivo. Finally, their main applications in the biomedical field will be presented so as to highlight their importance and advantages over classical nanostructures.

Understanding the unusual stiffness of hydrophobic dipeptide crystals

The hydrophobic diphenylalanine peptide crystal is known to be unusually stiff, with an experimental Young's modulus in the range of 19-27 GPa. Here it is shown by means of density functional theory calculations that phenylalanine-leucine, leucine-phenylalanine, alanine-valine, valine-alanine and valine-valine hydrophobic dipeptide crystals are also unusually stiff, with Young's moduli in the range of 19.7-33.3 GPa. To further our understanding of the origin of that unusual stiffness, a linear correlation is established between Young's modulus and the strength and orientation of the hydrogen bond network developed along the crystals, showing that stiffness in these materials is primarily dictated by hydrogen bonding.

Construction and Piezoelectric Properties of a Single-Peptide Nanotube Composed of Cyclic β-peptides with Helical Peptides on the Side Chains

To develop nanopiezoelectronics, it is necessary to investigate the relationship between the sizes and piezoelectric properties of the material. Peptide nanotubes (PNTs) composed of cyclic β-peptides have been studied as leading candidates for nanopiezoelectric materials. The current drawback of PNTs is aggregation to form a PNT bundle structure due to strong dipole-dipole interactions between PNTs. Here, we report the construction and piezoelectric properties of single PNTs without nonspecific aggregation by side-chain modification of helical peptides. A cyclic tri-β-peptide with a helical peptide was prepared by multiple-step liquid-phase peptide synthesis and assembled into PNTs by the vapor diffusion method. These nanotubes were characterized by polarized light microscopy and Fourier transform infrared (FTIR) spectroscopy. Additionally, atomic force microscopy (AFM) topographic images showed nanotubes with a height of 4 nm, which corresponds to the diameter of a PNT on a gold-coated mica substrate, indicating that a single PNT was prepared successfully. The converted piezoelectric response of a single PNT was determined to be 1.39 ± 0.12 pm/V. This value was consistent with that of a PNT bundle, which reveals that the piezoelectricity of PNTs is induced by deformation of their cyclic skeletons and is independent of the bundled structure. This finding not only demonstrates a new molecular design strategy to construct these smallest piezoelectric biomaterials by controlling the supramolecular hierarchical structures but also provides insights into the correlation between molecular assembly morphology and size-dependent piezoelectric properties.

Peptide-Based Electrospun Fibers: Current Status and Emerging Developments

Electrospinning is a well-known, straightforward, and versatile technique, widely used for the preparation of fibers by electrifying a polymer solution. However, a high molecular weight is not essential for obtaining uniform electrospun fibers; in fact, the primary criterion to succeed is the presence of sufficient intermolecular interactions, which function similar to chain entanglements. Some small molecules able to self-assemble have been electrospun from solution into fibers and, among them, peptides containing both natural and non-natural amino acids are of particular relevance. Nowadays, the use of peptides for this purpose is at an early stage, but it is gaining more and more interest, and we are now witnessing the transition from basic research towards applications. Considering the novelty in the relevant processing, the aim of this review is to analyze the state of the art from the early 2000s on. Moreover, advantages and drawbacks in using peptides as the main or sole component for generating electrospun nanofibers will be discussed. Characterization techniques that are specifically targeted to the produced peptide fibers are presented.

Supramolecular Dipeptide-Based Near-Infrared Fluorescent Nanotubes for Cellular Mitochondria Targeted Imaging and Early Apoptosis

Herein, we have designed and synthesized unsymmetrical visible Cy-3 and near-infrared (NIR) Cy-5 chromophores anchoring mitochondria targeting functional group conjugated with a Phe-Phe dipeptide by a microwave-assisted Fmoc solid phase peptide synthesis method on Wang resin. These dipeptide-based Cy-3-TPP/FF as well as Cy-5-TPP/FF molecules self-assemble to form fluorescent nanotubes in solution, and it has been confirmed by TEM, SEM, and AFM. The Cy-3-TPP/FF and Cy-5-TPP/FF molecules in solution exhibit narrow excitation as well as emission bands in the visible and NIR region, respectively. These lipophilic cationic fluorescent peptide molecules spontaneously and selectively accumulate inside the mitochondria of human carcinoma cells that have been experimentally validated by live cell confocal laser scanning microscopy and display a high Pearson's correlation coefficient in a colocalization assay. Live cell multicolor confocal imaging using the NIR Cy-5-TPP/FF in combination with other organelle specific dye is also accomplished. Moreover, these lipophilic dipeptide-based cationic molecules reach the critical aggregation concentration inside the mitochondria because of the extremely negative inner mitochondrial membrane potential [(ΔΨ_m)_cancer ≈ -220 mV] and form supramolecular nanotubes which are accountable for malignant mitochondria targeted early apoptosis. The early apoptosis is arrested using Cy-5-TPP/FF and confirmed by annexin V-FITC/PI apoptosis detection assay.

Amyloid-Like Aggregation in Diseases and Biomaterials: Osmosis of Structural Information

The discovery that the polypeptide chain has a remarkable and intrinsic propensity to form amyloid-like aggregates endowed with an extraordinary stability is one of the most relevant breakthroughs of the last decades in both protein/peptide chemistry and structural biology. This observation has fundamental implications, as the formation of these assemblies is systematically associated with the insurgence of severe neurodegenerative diseases. Although the ability of proteins to form aggregates rich in cross-β structure has been highlighted by recent studies of structural biology, the determination of the underlying atomic models has required immense efforts and inventiveness. Interestingly, the progressive molecular and structural characterization of these assemblies has opened new perspectives in apparently unrelated fields. Indeed, the self-assembling through the cross-β structure has been exploited to generate innovative biomaterials endowed with promising mechanical and spectroscopic properties. Therefore, this structural motif has become the fil rouge connecting these diversified research areas. In the present review, we report a chronological recapitulation, also performing a survey of the structural content of the Protein Data Bank, of the milestones achieved over the years in the characterization of cross-β assemblies involved in the insurgence of neurodegenerative diseases. A particular emphasis is given to the very recent successful elucidation of amyloid-like aggregates characterized by remarkable molecular and structural complexities. We also review the state of the art of the structural characterization of cross-β based biomaterials by highlighting the benefits of the osmosis of information between these two research areas. Finally, we underline the new promising perspectives that recent successful characterizations of disease-related amyloid-like assemblies can open in the biomaterial field.

Morphology, energetics and growth kinetics of diphenylalanine fibres

Diphenylalanine (FF) has been shown to self-assemble from water into heterogeneous fibres that are among the stiffest biomaterials known. How and why the fibres form has, however, not been clear. In this work, the nucleation and growth of FF fibres was investigated in a combined experimental and theoretical study. Scanning electron microscopy and optical microscopy showed FF fibre morphology to be hollow tubes of varying widths with occasional endcaps. Molecular dynamics simulations of FF nanostructures based on the bulk crystalline geometry demonstrated that axial growth stablilises the fibres and that structures with different widths show similar stabilities, in accord with the wide range of fibre widths observed experimentally. Linear dichroism (LD) spectroscopy was used to determine the thermal stability of the fibres, showing that FF solutions are fully monomeric at 70 °C and that fibres begin to form at ∼40 °C upon cooling. The LD kinetic studies indicated a nucleation-driven assembly with subsequent fibre growth, but a secondary nucleation process is required to explain the data.

Peptide Nanomaterials for Drug Delivery Applications

Self-assembled peptides have been shown to form well-defined nanostructures which display outstanding characteristics for many biomedical applications and especially in controlled drug delivery. Such biomaterials are becoming increasingly popular due to routine, standardized methods of synthesis, high biocompatibility, biodegradability and ease of upscale. Moreover, one can modify the structure at the molecular level to form various nanostructures with a wide range of applications in the field of medicine. Through environmental modifications such as changes in pH and ionic strength and the introduction of enzymes or light, it is possible to trigger self-assembly and design a host of different self-assembled nanostructures. The resulting nanostructures include nanotubes, nanofibers, hydrogels and nanovesicles which all display a diverse range of physico-chemical and mechanical properties. Depending on their design, peptide self-assembling nanostructures can be manufactured with improved biocompatibility and in vivo stability and the ability to encapsulate drugs with the capacity for sustained drug delivery. These molecules can act as carriers for drug molecules to ferry cargo intracellularly and respond to stimuli changes for both hydrophilic and hydrophobic drugs. This review explores the types of self-assembling nanostructures, the effects of external stimuli on and the mechanisms behind the assembly process, and applications for such technology in drug delivery.