Design of fluorescent materials for chemical sensing

Recent advances in photoluminescent fluorescent probe technology for food flavor compounds analysis

The real-time, precise qualitative and quantitative sensing of food flavor compounds is crucial for ensuring food safety, quality, and consumer acceptance. As indicators for food flavor labeling, it is vital to delve deep into the specific ingredient and content of food flavor compounds to assess the food flavor quality, but still facing huge challenges. Photoluminescent fluorescent probe technology, with fast detection and high sensitivity, has shown immense potentials in detecting food flavor compounds. In this review, the classification and optical sensing mechanism of photoluminescent fluorescent probe technology are described in detail. Besides, challenges in applying photoluminescent fluorescent probe technology to analyze food flavor compounds are outlined to indicate future research directions. We hope this review can provide an insight for the applications of photoluminescent fluorescent probe technology in the evaluation of food flavor quality in future.

Fast detection of tryptamine in meat products with azide-functionalized covalent organic frameworks confined in molecularly imprinted polymers

Tryptamine is a biogenic amine that affects organoleptic quality through the generation of off-odours in foods. Herein, imine-based covalent organic frameworks (COFs) were synthesized via Schiff base reactions and postmodified with click chemistry to generate azide-functionalized COFs with tunable azide units on the walls. The combination of molecular imprinting with COFs enabled the specific recognition of the targets. The resulting optosensing system (azide-functionalized COFs@MIPs) was used as a sample-to-answer analyser for detecting tryptamine (detection time within 10 min). A linear relationship was observed for the fluorescence response to tryptamine concentrations in the range of 3-120 μg L-1, with a limit of detection of 1.74 μg L-1. The recoveries for spiked samples were satisfactory, with relative standard deviations <9.90%. The optosensing system is a potential tool for the quantitative detection of tryptamine in meat products because of its lower cost, shorter processing time, and simpler processing steps compared to conventional chromatographic techniques.

Aggregation-Induced Emission Enhancement and Solid-State Photoswitching of Crystalline Carbazole N-Salicylidene Anilines

The development of fluorescent stimuli-responsive organic materials has attracted substantial interest due to their increasing optoelectronic applications. This study systematically introduces fluorine atoms on one end of carbazole-based N-salicylidene anilines 5a-5f to elucidate the impact in their solution and solid-state photophysics. The addition of fluorine atoms at one end of the molecule induced significant changes, for example, a reduction in the quantum yield (QY) fluorescence emission in solution, going from QY near unity in compound 5a (QY ∼ 100%) to a negligible emission in 5f (QY < 1%). Similarly, compound 5a showed a very strong aggregation-induced enhancement emission behavior, whereas compounds with a higher fluorine content were almost quenched. Furthermore, the crystalline solid-state photoisomerization in N-salicylidene anilines is not trivial, and only compounds with three (5e) and five fluorine atoms (5f) exhibited reversible solid-state photoisomerization under 405 nm light source irradiation. We propose that the presence of the arene-perfluoroarene interaction in the crystalline array facilitates the latter behavior. Our findings present a comprehensive study of crystal engineering for the obtention of photoswitchable crystalline materials and adjustable photophysics response, paving the way for its implementation in other systems.

A captivating approach to elevate the detection of Al3+ ions incorporates the utilization of a tripodal receptor intricately embellishing the surface of zinc oxide

The FDA (Food and Drug Administration, (USA)) lists ZnO as a material that is widely acknowledged to be safe. ZnO NPs with a range of tiny particle sizes were made using the precipitation process. ZnO nanoparticles' surface is embellished with a tripodal sensor containing naphthol units. The assembly with the same receptor decorated on ZnO NPs is contrasted with the cation detection capabilities of the purified tripodal receptor. The UV-visible spectrophotometric analysis was conducted to study the state transitions of the receptor and the decorated ZnO receptor. A positive selectivity to Al3+ cations is determined by the fluorescence study under ideal circumstances. The particle size and surface morphologies are determined by DLS and SEM analysis for the same receptor - TP1 and embellished with a tripodal receptor TP2. Using a fluorescence switch-on Photoinduced Electron Transfer (PET) mechanism, the receptor coated on ZnO detects the presence of Al3+ ions with specificity. The binding constant value was determined using the B-H plot equation. Binding stoichiometry for [TP1-Al3+, TP2-Al3+] showed a 1:1 ratio. The fluorescence switches ON-OFF process of the ZnO surface adorned - TP2 with Tripodal receptor- TP1 was used to create molecular logic gates, which can function as a module for sensors and molecular switches. The addition of Na2EDTA in the solution of the [TP1; TP2 - Al3+] complex resulted in a noticeable reduction in the emission of fluorescence. This finding offers compelling support for the reversibility of the chemosensor. To enable the practical application of this sensor, we have developed a cassette containing receptors TP1 and TP2. Successfully, it can detect Al3+ metal ions. We performed a comprehensive assessment of the dependability and appropriateness of our approach in measuring the concentration of Al3+ ions in wastewater produced by important industrial procedures.

Biosensors; a novel concept in real-time detection of autophagy

Autophagy is an early-stage response with self-degradation properties against several insulting conditions. To date, the critical role of autophagy has been well-documented in physiological and pathological conditions. This process involves various signaling and functional biomolecules, which are involved in different steps of the autophagic response. During recent decades, a range of biochemical analyses, chemical assays, and varied imaging techniques have been used for monitoring this pathway. Due to the complexity and dynamic aspects of autophagy, the application of the conventional methodology for following autophagic progression is frequently associated with a mistake in discrimination between a complete and incomplete autophagic response. Biosensors provide a de novo platform for precise and accurate analysis of target molecules in different biological settings. It has been suggested that these devices are applicable for real-time monitoring and highly sensitive detection of autophagy effectors. In this review article, we focus on cutting-edge biosensing technologies associated with autophagy detection.

Multiwall Carbon Nanotubes/Spherical Glassy Carbon as Environmentally Friendly Adsorption Materials Utilized in Adsorptive Stripping Voltammetry for the Determination of Trace Amounts of Ga(III)

This work presents a proposal for an adsorptive stripping voltammetric (AdSV) method for gallium(III) determination at an eco-friendly multiwall carbon nanotube/spherical glassy carbon (MWCNT/SGC) electrode modified with a lead film. The operational factors influencing the sensitivity of the AdSV procedure were thoroughly investigated, and their most favorable values were chosen (0.1 mol L-1 acetate buffer solution pH = 5.6; 7 × 10-5 mol L-1 Pb(II); 2 × 10-4 mol L-1 cupferron; potential/time of lead film formation: -1.9 V/30 s; potential/time of Ga(III)-cupferron adsorption: -0.75 V/30 s). The newly developed MWCNT/SGCE has proven to be a competitive substrate to the glassy carbon electrode to create a lead film electrode, since it allows the determination of gallium in a wider range of concentrations from 3 × 10-9 to 4 × 10-7 mol L-1 with a lower limit of detection equal to 9.5 × 10-10 mol L-1. The elaborated procedure has been shown to be highly selective and insensitive to the presence of an even 100-fold excess of most of the ions commonly found in environmental waters. The MWCNT/SGC sensor, which can maintain >95% of its original response after 70 days of use, has been successfully applied for the detection of gallium in water samples with the relative standard deviation (RSD) ranging from 4.5% to 6.2% (n = 3) and recoveries in the range from 95.3% to 104.9%.

Pesticides luminescent sensing by a Tb3+-doped Zn metal-organic framework with selectivity towards parathion

Organophosphorus pesticides (OPPs) such as parathion have extensive uses in agriculture and household applications. Chronic exposure to these pesticides can cause severe health and environmental issues. Therefore, a current ecological concern is associated with accumulating these noxious OPPs in food and water sources. In this work, a new Tb3+-doped Zn-LMOF (Zn-LMOF= (3D) {[Zn3(1,4 benzenedicarboxylate)3(EtOH)2]·(EtOH)0.6}∞) was synthesized by a solvent-free reaction between the Zn-LMOF and the salt TbCl3·6H2O using a high-speed ball milling. The Tb@Zn-LMOF was thoroughly characterized by multiple spectroscopic tools, including Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy, and studied in-depth as a luminescent sensor for a series of pesticides (parathion, malathion, methalaxil, carbofuran, iprodione, captan and glyphosate) in aqueous methanol. The Tb@Zn-LMOF is a long-lived green-emitting compound with luminescence originated by an efficient antenna effect from the excited energy levels of Zn-LMOF toward the 5D state of Tb3+ ions, as it is displayed by its strong emission bands at 488, 545, 585, and 620 nm and a lifetime of 1.01 ms upon excitation at 290 nm. Additions of pesticides to a neutral methanolic dispersion of Tb@Zn-LMOF modified its green emission intensity with a pronounced selectivity toward parathion within the micromolar concentration range. The detection limit for parathion was calculated to be 3.04 ± 0.2 μM for Tb@Zn-LMOF. Based on 31P NMR and mass spectrometry studies, it is attributed to the release of lanthanide ions from Tb@Zn-LMOF with the simultaneous formation of a Tb3+-parathion complex.

Recent Advances in Construction Strategies for Fluorescence Sensing Films

A year ago, film-based fluorescent sensors (FFSs) were recognized in the "IUPAC Top Ten Emerging Technologies in Chemistry 2022" due to their extensive application in detecting hidden explosives, illicit drugs, and volatile organic compounds. These sensors offer high sensitivity, specificity, immunity to light scattering, and noninvasiveness. The core of FFSs is the construction of high-performance fluorescent sensing films, which are dependent on the processes of "energy transfer" and "mass transfer" in the active layer and involve complex interactions between sensing molecules and analytes. This Perspective focuses on the latest strategies in constructing these films, emphasizing the design of sensing molecules with various innovative features and structures that enhance the mass transfer efficiency. Additionally, it discusses the ongoing challenges and potential advancements in the field of FFSs.

Thiourea-Based Receptors for Anion Recognition and Signaling

This work reports on two thiourea-based receptors with pyridine and amine units including 1-naphthyl (MT1N) and 4-nytrophenyl (MT4N) as signaling units. For both compounds, their affinity and signaling ability toward various anions of different geometry and basicity in DMSO were studied using UV-vis, fluorescence, and 1H NMR techniques. Anion recognition studies revealed that both MT1N and MT4N have, in general, high affinities toward basic anions. In this regard, a higher acidity of the MT4N receptor was demonstrated. Furthermore, MT4N has a higher affinity for fluoride (log K1 = 5.98) than for the other anions and can effectively detect it through colorimetric changes that can be monitored by the UV-vis technique. The interaction between receptors and anions mainly involves the hydrogens of the amino and thiourea groups of the former. Complementary single-crystal X-ray diffraction studies and molecular modeling at the DFT level were also performed.

Rare Earth -MOFs: From Synthesis to Their Deployment for Amine-Sensing Application in Aqueous Media

The pursuit of developing sensors, characterized by their fluorescence-intensity enhancement or "turn-on" behavior, for accurately detecting noxious small molecules, such as amines, at minimal levels remains a significant challenge. Metal-organic frameworks (MOFs) have emerged as promising candidates as sensors as a result of their diverse structural features and tunable properties. This study introduces the rational synthesis of a new highly coordinated (6,12)-connected rare earth (RE) alb-MOF-3, by combining the nonanuclear 12-connected hexagonal prismatic building units, [RE9(μ3-O)2(μ3-X)12(OH)2(H2O)7(O2C-)12], with the 6-connected rigid trigonal prismatic extended triptycene ligand. The resulting Y-alb-MOF-3 material is distinguished by its high microporosity and Brunauer-Emmett-Teller surface area of approximately 1282 m2/g, which offers notable hydrolytic stability. Remarkably, it demonstrates selective detection capabilities for primary aliphatic amines in aqueous media, as evidenced by fluorescence turn-on behavior and photoluminescence (PL) titration measurements. This work emphasizes the potential of MOFs as sensors in advancing their selectivity and sensitivity toward various analytes.

Naphthalene Diimide-Based Orange Emitting Luminogen: A Fluorometric Probe for Thiol Sensing through the Click Reaction

Fluorometric sensors have gained considerable attention in various fields, including environmental monitoring, biomedical research, and clinical diagnostics. This article delineates the fabrication of an orange emitting naphthalene diimide (NDI) derivative consisting of maleimide moiety (NDI-mal) for fluorometric sensing of thiols. Spherical shaped organic nanoparticles (∼100-150 nm) were constructed by NDI-mal in dimethyl sulfoxide (DMSO)/dimethylformamide (DMF)-water through J-type aggregation. NDI-mal displayed self-assembly driven aggregation-induced emission (AIE) through excimer formation at λem= 588 nm at fw = 99 vol % DMSO/DMF-water. Naphthyl residue at both terminals of NDI-mal facilitates intramolecular charge transfer (ICT) from the donor naphthyl residue to the acceptor NDI core. The fluorescence intensity of NDI-mal fluorescent organic nanoparticles (FONPs) got quenched in the presence of thiols due to thiol-maleimide adduct formation (Michael addition). NDI-mal FONPs selectively probed thiol functionalized small molecules (4-aminothiophenol), biomolecules (glutathione (GSH)), and proteins (reduced BSA) with high sensitivity having a limit of detection of 15.3 nM, 6.0 nM, and 9.2 ng/mL, respectively. Importantly, thiol sensing was selective against analogous small molecules, biomolecules, and proteins devoid of thiol moieties. Cellular imaging demonstrated selective diagnosis of cancer cells by NDI-mal FONPs through quenching of its emission upon interaction with thiols in B16F10 cells due to the high abundance of GSH in cancer cells compared to NIH3T3 cells. NDI-mal FONPs emitted their native fluorescence inside cells subjected to reactive oxygen species mediated thiol oxidation via Fenton's reaction. Notably, GSH-maleimide adduct formation by NDI-mal FONPs displayed notable therapeutic efficacy against cancer cells having ∼2.4-fold higher killing of B16F10 in comparison to NIH3T3 cells possibly through oxidative stress induced apoptosis owing to the depletion in the GSH level. Thus, NDI-mal AIE-gen successfully emerged as a selective and sensitive probe toward thiols through thiol-maleimide click chemistry with therapeutic ability against cancer cells in the absence of systematic intervention.

Naphthalimide-Based AIEgens for Sensing Protein Disulfide Isomerase through Thiol-Disulfide Redox Exchange

Aggregation-induced emission (AIE)-based fluorescent organic nanoparticles (FONPs) with distinctive characteristics are emerging as superior sensors due to their facile fabrication, high signal-to-noise ratio, and good biocompatibility. The present article delineates the detection and analysis of the redox behavior of the protein disulfide isomerase (PDI) enzyme by exploitation of the AIE of novel naphthalimide (NI) derivatives having thiol (-SH) and disulfide (-S-S-) moieties. Self-aggregated spherical-shaped organic nanoparticles were prepared by synthesized NI-based amphiphiles (NISH, NISS, NINSS, and TNINSH) through J-type aggregation in DMSO-water (fw = 99 vol %). Naphthyl residue containing NI-derived amphiphiles (NINSS and TNINSH) exhibited AIE (blue and yellow) at 470 and 550 nm, respectively, in DMSO-water (fw = 99 vol %). NINSS and TNINSH FONPs were suitably utilized in sensing PDI through their redox nature of thiol-disulfide exchange. Fluorescence quenching of NINSS FONPs was observed due to reduction of disulfide to thiol by PDI, whereas emission intensity was progressively red-shifted and enhanced ("Dual-AIE") for TNINSH (containing ER-targeting N-tosylethylenediamine), owing to oxidation of thiol to disulfide by PDI. NINSS and TNINSH FONPs were found to be highly efficient in sensing PDI through the AIE-based "fluorescence off/on" mechanism having limits of detection of ∼12.6-17.7 and ∼11.7-16.5 ng/mL, respectively. In vitro cell imaging for NIH3T3 (noncancer) and B16F10 (melanoma) cells with NINSS and TNINSH FONPs displayed excellent diagnosis of eukaryotic cells upon interaction with indigenous PDI. Notably, detection of cancer cells was more sensitive over the noncancerous cells by these FONPs due to overexpression of PDI within cancer cells.

Receptor-based detection of microplastics and nanoplastics: Current and future

Plastic pollution is an emerging environmental concern, gaining significant attention worldwide. They are classified into microplastics (MP; defined from 1 μm to 5 mm) and smaller nanoplastics (NP; <1 μm). NPs may pose higher ecological risks than MPs. Various microscopic and spectroscopic techniques have been used to detect MPs, and the same methods have occasionally been used for NPs. However, they are not based on receptors, which provide high specificity in most biosensing applications. Receptor-based micro/nanoplastics (MNP) detection can provide high specificity, distinguishing MNPs from the environmental samples and, more importantly, identifying the plastic types. It can also offer a low limit of detection (LOD) required for environmental screening. Such receptors are expected to detect NPs specifically at the molecular level. This review categorizes the receptors into cells, proteins, peptides, fluorescent dyes, polymers, and micro/nanostructures. Detection techniques used with these receptors are also summarized and categorized. There is plenty of room for future research to test for broader classes of environmental samples and many plastic types, to lower the LOD, and to apply the current techniques for NPs. Portable and handheld MNP detection should also be demonstrated for field use since the current demonstrations primarily utilized laboratory instruments. Detection on microfluidic platforms will also be crucial in miniaturizing and automating the assay and, eventually, collecting an extensive database to support machine learning-based classification of MNP types.

Synthesis and luminescence monitoring of iridium(III) complex-functionalized gold nanoparticles and their application for determination of gold(III) ions

A new method is presented for the one-step synthesis and real-time monitoring of iridium(III) complex-functionalized AuNPs from the precursor gold(III) chloride (AuCl₃). The functionalized AuNPs with an average size of 8 - 20 nm were obtained by the reduction of Au³⁺ ions by the alkyne group of iridium(III) complexes, which was accompanied by the anchoring iridium(III) complexes on the surface of the nanoparticles. Meanwhile, the luminescence of the iridium(III) complexes was effectively quenched due to distance-dependent fluorescence quenching by AuNPs, thereby enabling luminescence monitoring of the formation process of the functionalized AuNPs and obtaining scattering information and spectral information in real time. Moreover, this method was applied to the determination of Au³⁺ ions in buffer with a limit of detection of 0.38 μM at 700 nm in luminescence mode, while the detection limit for absorbance was 10.04 μM. Importantly, the multimodal detection strategy alleviates interference from other metal ions. Furthermore, the iridium(III) alkyne complexes were capable of imaging mitochondrial Au³⁺ ions in living cells. Taken together, this work opens a new avenue for convenient synthesis and monitoring formation of functionalized AuNPs, and also provides a tool for selective determination of Au³⁺ ions in solution and in cellulo.

Synthesis and Application of Fluorescent Polymer Micro- and Nanoparticles

Fluorescent polymer particles have witnessed an increasing interest in recent years, owing to their fascinating physicochemical properties as well as wide-ranging applications. In this review, the state-of-the-art research progress of fluorescent polymer particles in the past five years is summarized. First, the synthesis protocols for fluorescent polymer particles, including emulsion polymerization, precipitation polymerization, dispersion polymerization, suspension polymerization, nanoprecipitation, self-assembly, and post-polymerization modification, are presented in detail. Then, the applications of the resulting beguiling particles in anticounterfeiting, chemical sensing, and biomedicine, are illustrated. Finally, the challenges and opportunities that exist in the field are pointed out. This review aims to offer important guidance and stimulate more research attention to this rapidly developing field.

Hybrid films composed of ethyl(hydroxyethyl)cellulose and silica xerogel functionalized with a fluorogenic chemosensor for the detection of mercury in water

Ethyl(hydroxyethyl)cellulose (EHEC) and a silica-based xerogel (SBX) were functionalized with a (18-crown-6)-styrylpyridine precursor (1) to obtain the modified polymers EHEC-1 and SBX-1, respectively. Films were obtained and the resulting materials were used as fluorogenic devices for the detection of Hg²⁺ in water. The films produced from EHEC-1 showed high water retention, making it difficult to apply as a reusable optical chemosensor. Since SBXs are recognized in the literature for their hydrophobicity, a hybrid film composed of EHEC and SBX-1 which did not show water retention was produced and characterized. This system showed rapid response time, outstanding selectivity compared to several other studied metal ions, and sensitivity for the detection of Hg²⁺ in water. The detection limit for this material using fluorescence technique was 2 ppb (∼10^-8 mol L^-1). The reversibility of the complex formed between EHEC-SBX-1 film and Hg²⁺ was demonstrated by the addition of cysteine to the medium. The result obtained also allowed the assembly of INHIBIT and IMPLICATION molecular logic gates, using Hg²⁺ and cysteine as inputs. The results described in this article have important significance in the development of novel reversible fluorogenic chemosensors and adsorbent materials for the effective removal of Hg²⁺ ions.

Unraveling the Strong Fluorescence Enhancement of HPBI Molecules by ZIF-8 Colloidal Suspensions via Adsorption Analysis

Enhancing the fluorescence of organic dye by colloidal particles is one of the most promising routes to optimize fluorescence detection. However, in addition to metallic particles, which serve as the most frequently used particles and have been found to employ the plasmonic resonance to provide strong fluorescence enhancement, neither new types of colloidal particles nor new fluorescence mechanisms have been intensively explored in recent years. In this work, strongly enhanced fluorescence was observed when 2-(2-hydroxyphenyl)-1H-benzimidazole (HPBI) molecules were simply mixed with zeolitic imidazolate framework-8 (ZIF-8) colloidal suspensions. Moreover, the enhancement factor ΔI = I_HPBI+ZIF-8/I_HPBI does not increase accordingly with the increasing amount of HPBI. To find out how the strong fluorescence was triggered and affected by the amount of HPBI, multiple techniques were applied to analyze the adsorption behavior. By combining analytical ultracentrifugation with first-principles calculations, we proposed that HPBI molecules were adsorbed onto the surface of ZIF-8 particles coordinatively and electrostatically, depending on the concentration of HPBI molecules. The coordinative adsorption would result in a new kind of fluorescence emitter. The new fluorescence emitters tend to distribute on the outer surface of ZIF-8 particles periodically. The distance between each fluorescence emitter is fixed and much smaller than the wavelength of the excitation light. Thus, it can be concluded that collective spontaneous emission might be triggered.

Synthesis of Pyrazolo[1,5-a]pyridinyl, Pyrazolo[1,5-a]quinolinyl, and Pyrazolo[5,1-a]isoquinolinyl Sulfonyl Fluorides via a [3 + 2] Annulation

A [3 + 2] cycloaddition reaction of N-aminopyridines, N-aminoquinolines, and N-aminoisoquinolines with 1-bromoethene-1-sulfonyl fluoride (BESF) was performed to obtain optimum yields of various useful pyrazolo[1,5-a]pyridinyl, pyrazolo[1,5-a]quinolinyl, and pyrazolo[5,1-a]isoquinolinyl sulfonyl fluorides (43-90% yield). The transformation process showed broad substrate specificity, mild reaction conditions, and operational simplicity. Therefore, the reaction has great applicable value in the field of medicinal chemistry and other disciplines.

Zinc status in public health: exploring emerging research trends through bibliometric analysis of the historical context from 1978 to 2022

The current study aims to provide a roadmap for future research by analyzing the research structures and trends in scholarly publications related to the status of zinc in public health. Only journal articles published between 1978 and 2022 are included in the refined bibliographical outputs retrieved from the Web of Science (WoS) database. The first section announces findings based on WoS categories, such as discipline heterogeneity, times cited and publications over time, and citation reports. The second section then employs VoSViewer software for bibliometric analysis, which includes a thorough examination of co-authorship among researchers, organizations, and countries and a count of all bibliographic databases among documents. The final section discusses the research's weaknesses and strengths in zinc status, public health, and potential future directions; 7158 authors contributed to 1730 papers (including 339 with publications, more than three times). "Keen, C.L." is a researcher with the most publications and a better understanding of zinc status in public health. Meanwhile, the USA has been the epicenter of research on the status of zinc in public health due to the highest percentage of publications with the most citations and collaboration with the rest of the world, with the top institution being the University of California, Davis. Future research can be organized collaboratively based on hot topics from co-occurrence network mapping and bibliographic couplings to improve zinc status and protect public health.

Efficient Optosensing of Hippuric Acid in the Undiluted Human Urine with Hydrophilic "Turn-On"-Type Fluorescent Hollow Molecularly Imprinted Polymer Microparticles

The development of complex biological sample-compatible fluorescent molecularly imprinted polymers (MIPs) with improved performances is highly important for their real-world bioanalytical and biomedical applications. Herein, we report on the first hydrophilic "turn-on"-type fluorescent hollow MIP microparticles capable of directly, highly selectively, and rapidly optosensing hippuric acid (HA) in the undiluted human urine samples. These fluorescent hollow MIP microparticles were readily obtained through first the synthesis of core-shell-corona-structured nitrobenzoxadiazole (NBD)-labeled hydrophilic fluorescent MIP microspheres by performing one-pot surface-initiated atom transfer radical polymerization on the preformed "living" silica particles and subsequent removal of their silica core via hydrofluoric acid etching. They showed "turn-on" fluorescence and high optosensing selectivity and sensitivity toward HA in the artificial urine (the limit of detection = 0.097 μM) as well as outstanding photostability and reusability. Particularly, they exhibited much more stable aqueous dispersion ability, significantly faster optosensing kinetics, and higher optosensing sensitivity than their solid counterparts. They were also directly used for quantifying HA in the undiluted human urine with good recoveries (96.0%-102.0%) and high accuracy (RSD ≤ 4.0%), even in the presence of several analogues of HA. Such fluorescent hollow MIP microparticles hold much promise for rapid and accurate HA detection in the clinical diagnostic field.

Luminescent Polymer Composites for Optical Fiber Sensors

Optical fiber sensors incorporating luminescent materials are useful for detecting physical parameters and biochemical species. Fluorescent materials integrated on the tips of optical fibers, for example, provide a means to perform fluorescence thermometry while monitoring the intensity or the spectral variations of the fluorescence signal. Similarly, certain molecules can be tracked by monitoring their characteristic emission in the UV wavelength range. A key element for these sensing approaches is the luminescent composite, which may be obtained upon allocating luminescent nanomaterials in glass or polymer hosts. In this work, we explore the fluorescence features of two composites incorporating lanthanide-doped fluorescent powders using polydimethylsiloxane (PDMS) as a host. The composites are obtained by a simple mixing procedure and can be subsequently deposited onto the end faces of optical fibers via dip coating or molding. Whereas one of the composites has shown to be useful for the fabrication of fiber optic temperature sensors, the other shows promising result for detection of UV radiation. The performance of both composites is first evaluated for the fabrication of membranes by examining features such as fluorescent stability. We further explore the influence of parameters such as particle concentration and density on the fluorescence features of the polymer blends. Finally, we demonstrate the incorporation of these PDMS fluorescent composites onto optical fibers and evaluate their sensing capabilities.

Fluorescent Carbon Dots for Super-Resolution Microscopy

Conventional fluorescence microscopy is limited by the optical diffraction of light, which results in a spatial resolution of about half of the light's wavelength, approximately to 250-300 nm. The spatial resolution restricts the utilization of microscopes for studying subcellular structures. In order to improve the resolution and to shatter the diffraction limit, two general approaches were developed: a spatially patterned excitation method and a single-molecule localization strategy. The success of super-resolution imaging relies on bright and easily accessible fluorescent probes with special properties. Carbon dots, due to their unique properties, have been used for super-resolution imaging. Considering the importance and fast development of this field, this work focuses on the recent progress and applications of fluorescent carbon dots as probes for super-resolution imaging. The properties of carbon dots for super-resolution microscopy (SRM) are analyzed and discussed. The conclusions and outlook on this topic are also presented.

Carbon dot-based molecularly imprinted fluorescent nanopomegranate for selective detection of quinoline in coking wastewater

Quinoline, as a refractory and toxic organic pollutant in coking wastewater, causes great harm to the environment and human health even in trace amount. To realize the selective and sensitive detection of quinoline in coking wastewater, a novel molecularly imprinted fluorescent nanopomegranate with carbon dots (CDs) as seeds and fluorescence source (CD-MIP) was prepared, using quinoline as the template, and N-(β-aminoethyl)-γ-aminopropyl trimethoxysilane (KH792) as the monomer. The preparation and detection conditions of CD-MIP were systematically optimized. The structure and detection performance of CD-MIP were investigated in detail. The resulting CD-MIP exhibits excellent photoluminescence performance, high detection sensitivity, good selectivity and reproducibility towards quinoline. Under the optimized conditions, the fluorescence intensity of CD-MIP shows a satisfying linearity with quinoline concentration in the range of 20-200 mg/L with a detection limit of 6.7 mg/L. Owing to the existence of imprinted cavities that highly match with quinoline, a high imprinting factor (3.46) for CD-MIP was obtained. In addition, CD-MIP represents a greater affinity towards quinoline than towards other analogues, as well as an outstanding anti-interference capability. For trace analysis in real coking wastewater, CD-MIP also gives satisfactory results. Therefore, CD-MIP shows promising application in the selective detection of trace quinoline in wastewater.

Water-soluble polymers with aggregation-induced emission and ultra-long room temperature phosphorescence

Achieving sky blue fluorescence emission and durable green RTP emission materials under air conditions by free radical polymerization.

Sialyl-Tn Antigen-Imprinted Dual Fluorescent Core-Shell Nanoparticles for Ratiometric Sialyl-Tn Antigen Detection and Dual-Color Labeling of Cancer Cells

Sialyl-Tn (STn or sialyl-Thomsen-nouveau) is a carbohydrate antigen expressed by more than 80% of human carcinomas. We here report a strategy for ratiometric STn detection and dual-color cancer cell labeling, particularly, by molecularly imprinted polymers (MIPs). Imprinting was based on spectroscopic studies of a urea-containing green-fluorescent monomer 1 and STn-Thr-Na (sodium salt of Neu5Acα2-6GalNAcα-O-Thr). A few-nanometer-thin green-fluorescent polymer shell, in which STn-Thr-Na was imprinted with 1, other comonomers, and a cross-linker, was synthesized from the surface of red-emissive carbon nanodot (R-CND)-doped silica nanoparticles, resulting in dual fluorescent STn-MIPs. Dual-color labeling of cancer cells was achieved since both red and green emissions were detected in two separate channels of the microscope and an improved accuracy was obtained in comparison with single-signal MIPs. The flow cytometric cell analysis showed that the binding of STn-MIPs was significantly higher (p < 0.001) than that of non-imprinted polymer (NIP) control particles within the same cell line, allowing to distinguish populations. Based on the modularity of the luminescent core-fluorescent MIP shell architecture, the concept can be transferred in a straightforward manner to other target analytes.

Fluorescent Covalent Organic Frameworks: A Promising Material Platform for Explosive Sensing

Covalent organic frameworks (COFs) are a novel class of porous crystalline organic materials with organic small molecule units connected by strong covalent bonds and extending in two- or three-dimension in an ordered mode. The tunability, porosity, and crystallinity have endowed covalent organic frameworks the capability of multi-faceted functionality. Introduction of fluorophores into their backbones or side-chains creates emissive covalent organic frameworks. Compared with common fluorescent organic solid materials, COFs possess several intrinsic advantages being as a type of irreplaceable fluorescence materials mainly because its highly developed pore structures can accommodate various types of guest analytes by specific or non-specific chemical bonding and non-bonding interaction. Developments in fluorescent COFs have provided opportunities to enhance sensing performance. Moreover, due to its inherent rigidified structures and fixed conformations, the intramolecular rotation, vibration, and motion occurred in common organic small molecules, and organic solid systems can be greatly inhibited. This inhibition decreases the decay of excited-state energy as heat and blocks the non-radiative quenching channel. Thus, fluorescent COFs can be designed, synthesized, and precisely tuned to exhibit optimal luminescence properties in comparison with common homogeneous dissolved organic small molecule dyes and can even compete with the currently mainstream organic solid semiconductor-based luminescence materials. This mini-review discusses the major design principle and the state-of-the-art paragon examples of fluorescent COFs and their typical applications in the detection and monitoring of some key explosive chemicals by fluorescence analysis. The challenges and the future direction of fluorescent COFs are also covered in detail in the concluding section.

A Fluorescent Cage for Supramolecular Sensing of 3-Nitrotyrosine in Human Blood Serum

3-Nitrotyrosine (NT) is generated by the action of peroxynitrite and other reactive nitrogen species (RNS), and as a consequence it is accumulated in inflammation-associated conditions. This is particularly relevant in kidney disease, where NT concentration in blood is considerably high. Therefore, NT is a crucial biomarker of renal damage, although it has been underestimated in clinical diagnosis due to the lack of an appropriate sensing method. Herein we report the first fluorescent supramolecular sensor for such a relevant compound: Fluorescence by rotational restriction of tetraphenylethenes (TPE) in a covalent cage is selectively quenched in human blood serum by 3-nitrotyrosine (NT) that binds to the cage with high affinity, allowing a limit of detection within the reported physiological concentrations of NT in chronic kidney disease.

Fluorescence turn on amine detection in a cationic covalent organic framework

Ionic covalent organic frameworks (iCOFs) are new examples of porous materials and have shown great potential for various applications. When functionalized with suitable emission sites, guest uptake via the ionic moieties of iCOFs can cause a significant change in luminescence, making them excellent candidates for chemosensors. In here, we present a luminescence sensor in the form of an ionic covalent organic framework (TGH⁺•PD) composed of guanidinium and phenanthroline moieties for the detection of ammonia and primary aliphatic amines. TGH⁺•PD exhibits strong emission enhancement in the presence of selective primary amines due to the suppression of intramolecular charge transfer (ICT) with an ultra-low detection limit of 1.2 × 10^‒7 M for ammonia. The presence of ionic moieties makes TGH⁺•PD highly dispersible in water, while deprotonation of the guanidinium moiety by amines restricts its ICT process and signals their presence by enhanced fluorescence emission. The presence of ordered pore walls introduces size selectivity among analyte molecules, and the iCOF has been successfully used to monitor meat products that release biogenic amine vapors upon decomposition due to improper storage.

Ionic covalent organic frameworks (iCOFs) are new examples of porous materials and show great potential for various applications. Here, the authors demonstrate functionalization of an iCOFs with suitable emission sites and application as chemosensor for amine detection with high sensitivity which can be used to monitor meat spoilage.

Recent Development in Coordination Compounds as a Sensor for Cyanide Ions in Biological and Environmental Segments

Rapid detection of toxic ions has taken great attention in the last few decades due to its importance in maintaining a greener environment for human beings. The extreme toxicity of cyanide (CN-) ions is a great environmental concern as its continued industrial use generates interest in facile and sensitive methods for CN- ions detection. Since CN- ions act as a ligand in coordination chemistry which rapidly coordinates with suitable metals and forms complexes, this ability was mainly explored in its detection. It also attacks the central metal in coordination compounds and gives a fluorimetric response. Coordination compounds behave as a sensor for the detection of important ions like CN- ions and have gained great attention due to their facile synthesis, multianalyte detection, clear detection and low detection limit. Recently, considerable efforts have been devoted to the detection and quantification of hazardous multianalyte using a single probe. Cu2+ complexes are the main complexes used for CN- ions detection; however, the complexes of many other metals are also used as sensors. Four basic types of interaction have been discussed in coordination compound sensors for CN- detection. The performances of different sensors are compared with one another and the sensors which have the lowest detection limit are highlighted. This review comprises the progress made by coordination compounds as sensors for the detection of CN- ions in the last six years (2015-2021). To the best of our knowledge, there is no review on coordination compounds as a sensor for CN- ions during this period. [Figure: see text].

Construction of fluorescent logic gates for the detection of mercury(II) and ciprofloxacin based on phycocyanin

Chemical pollutants such as heavy metals and antibiotics in the environment pose a huge threat to humans and animals. Our studies have demonstrated that the fluorescence of phycocyanin showed quenching responses towards both mercury (Hg2+) and ciprofloxacin (CIP), which acted in accordance with the "OR" molecular logic gate. In order to discriminate Hg2+ and CIP in application scenarios, cysteine (Cys) was utilized to design another "INHIBIT" logic gate, in which Hg2+ and Cys were the two inputs. Thus, an intelligent biosensor with dual-target identification capacity was successfully developed by using a fluorescent natural protein in an ingenious logic gate system.

Lanthanide-organic pincer hosts with allosteric-controlled metal ion binding specificity

A series of lanthanide-organic pincer hosts were synthesized, which showed allosteric-controlled metal ion binding selectivities due to the lanthanide-induced subtle changes of the central vacant binding site.

Pomegranate Punica granatum peel waste as a naked-eye natural colorimetric sensor for the detection and determination of Fe+3 and I- ions in water

The utilization of renewable and abundant agricultural waste such as Pomegranate (Punica granatum L.) peel extract has been developed wherein a simple extraction of dried peel in water offered a natural sensor; ensuing yellowish solution comprising phenolic compounds reacted explicitly to detect Fe⁺³ and I^- solutions by naked-eye. The UV-Vis absorption spectrum of the resulting extracted mixture was drastically changed toward the longer wavelengths only after the addition of the Fe³⁺ and I^- while there was no discernible spectral change due to the addition of a broad range of other common cations and anions. In the case of Fe³⁺ and I^-, the transformation can be followed by the naked eye in the concentration range of 5 × 10^-4 M and 1 × 10^-2 M, respectively. An acceptable and reasonable detection with 47.05426 μM efficiency was attained in comparison to other Fe³⁺ indicators such as ferroin.

Supramolecular self-assembly mediated aggregation-induced emission of fluorene-derived cyanostilbenes: multifunctional probes for live cell-imaging

The first discovery of aggregation-induced emission (AIE), whereby luminogen aggregation plays a positive role in enhancing the light-emission efficiency, has piqued the interest of many researchers as it opens up a new avenue for the exploration of practically beneficial luminescent materials. Diverse AIE-active luminogens (or AIEgens) with tunable emission colours and very high quantum yields (up to unity) in the solid state have been extensively utilised in a broad range of fields including optoelectronics, energy and bioscience. In this article, we describe novel fluorene-based fluorogens that exhibit bright emission in the solid-state, mechanical stimuli-responsive optical properties and aggregation-induced emissive ability, and were able to modulate their donor and acceptor properties. The target compounds were synthesized by a Knoevenagel condensation followed by Suzuki cross-coupling reaction, which tends to result in good yields. The target cyanostilbenes (4a-4d) show different reversibly switched states with high contrast through morphology modulation and demonstrate solvatochromic, vapochromic, and AIE properties. These results strongly suggest that compound 4d has better properties than the other derivatives (4a-c) due to the presence of extended donor-acceptor ability. Moreover, density-functional theory (DFT) calculations strongly support the UV-Vis and fluorescence spectral studies. The formation of nano-flakes and cuboid-shaped nanocrystals was further confirmed by FE-SEM and AFM studies. The synthesized compound 4d displayed very bright emission in the solid state and in the aggregate state as compared with the other derivatives (4a-4c). These results might be due to the presence of high-color contrast, which is an advantage for elucidation and overcomes the challenges exhibited in live-cell imaging applications. Moreover, an MTT assay on live A549 cells incubated with the target compound (4d) showed very low cytotoxicity even at high concentrations.

Study on Photophysical Properties of Novel Fluorescent Phenanthroimidazole-Thiadiazole Hybrid Derivatives

Phenanthroimidazole-thiadiazole hybrid derivatives, which are new heterocyclic compounds with fluorescence properties, were synthesized by designing a two-step reaction mechanism and their photophysical properties were investigated. The synthesized derivatives were purified and their structures were elucidated by ATR-IR, ¹H-NMR, elemental analysis and HR-MS methods. In the next stage of the study, the absorption and emission spectra of the synthesized new phenanthroimidazole-thiadiazole hybrid derivatives were determined by UV-Vis and fluorescence spectroscopy. Stokes' shifts, molar extinction coefficients (ε), singlet energy levels (Es), quantum yield (ϕ_f), lifetimes (τ), the radiative (k_r) and the nonradiative (k_nr) constant for new hybrid derivatives were measured in DMSO. In addition, aggregation measurements, which is an important parameter that changes the photophysical properties were performed and for these compounds, structure: photophysical properties were discussed.

Metal Complexes of Porphyrinoids Containing Nonpyrrolic Heterocycles

The replacement of one or more pyrrolic building block(s) of a porphyrin by a nonpyrrolic heterocycle leads to the formation of so-called pyrrole-modified porphyrins (PMPs), porphyrinoids of broad structural variability. The wide range of coordination environments (type, number, charge, and architecture of the donor atoms) that the pyrrole-modified frameworks provide to the central metal ions, the frequent presence of donor atoms at their periphery, and their often observed nonplanarity or conformational flexibility distinguish the complexes of the PMPs clearly from those of the traditional square-planar, dianionic, N₄-coordinating (hydro)porphyrins. Their different coordination properties suggest their utilization in areas beyond which regular metalloporphyrins are suitable. Following a general introduction to the synthetic methodologies available to generate pyrrole-modified porphyrins, their general structure, history, coordination chemistry, and optical properties, this Review highlights the chemical, electronic (optical), and structural differences of specific classes of metalloporphyrinoids containing nonpyrrolic heterocycles. The focus is on macrocycles with similar "tetrapyrrolic" architectures as porphyrins, thusly excluding the majority of expanded porphyrins. We highlight the relevance and application of these metal complexes in biological and technical fields as chemosensors, catalysts, photochemotherapeutics, or imaging agents. This Review provides an introduction to the field of metallo-PMPs as well as a comprehensive snapshot of the current state of the art of their synthesis, structures, and properties. It also aims to provide encouragement for the further study of these intriguing and structurally versatile metalloporphyrinoids.

Plastic Waste Precursor-Derived Fluorescent Carbon and Construction of Ternary FCs@CuO@TiO2 Hybrid Photocatalyst for Hydrogen Production and Sensing Application

A sustainable nexus between renewable energy production and plastic abatement is imperative for overall sustainable development. In this regard, this study aims to develop a cheaper and environmentally friendly nexus between plastic waste management, wastewater treatment, and renewable hydrogen production. Fluorescent carbon (FCs) were synthesized from commonly used LDPE (low-density polyethylene) by a facile hydrothermal approach. Optical absorption study revealed an absorption edge around 300 nm and two emission bands at 430 and 470 nm. The morphological analysis showed two different patterns of FCs, a thin sheet with 2D morphology and elongated particles. The sheet-shaped particles are 0.5 μm in size, while as for elongated structures, the size varies from 0.5 to 1 μm. The as-synthesized FCs were used for the detection of metal ions (reference as Cu2+ ions) in water. The fluorescence intensity of FCs versus Cu2+ ions depicts its upright analytical ability with a limit of detection (LOD) reaching 86.5 nM, which is considerably lesser than earlier reported fluorescence probes derived from waste. After the sensing of Cu2+, the as-obtained FCs@Cu2+ was mixed with TiO2 to form a ternary FCs@CuO@TiO2 composite. This ternary composite was utilized for photocatalytic hydrogen production from water under 1.5 AM solar light irradiation. The H2 evolution rate was found to be ~1800 μmolg−1, which is many folds compared to the bare FCs. Moreover, the optimized FCs@CuO@TiO2 ternary composite showed a photocurrent density of ~2.40 mA/cm2 at 1 V vs. Ag/AgCl, in 1 M Na2SO4 solution under the illumination of simulated solar light. The achieved photocurrent density corresponds to the solar-to-hydrogen (STH) efficiency of ~0.95%. The efficiency is due to the fluorescence nature of FCs and the synergistic effect of CuO embedded in TiO2, which enhances the optical absorption of the composite by reaching the bandgap of 2.44 eV, apparently reducing the recombination rate, which was confirmed by optoelectronic, structural, and spectroscopic characterizations.