CuFeS2 as a Very Stable High-Capacity Anode Material for Sodium-Ion Batteries: A Multimethod Approach for Elucidation of the Complex Reaction Mechanisms during Discharge and Charge Processes

Highly crystalline CuFeS₂ containing earth-abundant and environmentally friendly elements prepared via a high-temperature synthesis exhibits an excellent electrochemical performance as an anode material in sodium-ion batteries. The initial specific capacity of 460 mAh g^-1 increases to 512 mAh g^-1 in the 150th cycle and then decreases to a still very high value of 444 mAh g^-1 at 0.5 A g^-1 in the remaining 550 cycles. Even for a large current density, a pronounced cycling stability is observed. Here, we demonstrate that combining the results of X-ray powder diffraction experiments, pair distribution function analysis, and ²³Na NMR and Mössbauer spectroscopy investigations performed at different stages of discharging and charging processes allows elucidation of very complex reaction mechanisms. In the first step after uptake of 1 Na/CuFeS₂, nanocrystalline NaCuFeS₂ is formed as an intermediate phase, which surprisingly could be recovered during charging. On increasing the Na content, Cu⁺ is reduced to nanocrystalline Cu, while nanocrystalline Na₂S and nanosized elemental Fe are formed in the discharged state. After charging, the main crystalline phase is NaCuFeS₂. At the 150th cycle, the mechanisms clearly changed, and in the charged state, nanocrystalline Cu_xS phases are observed. At later stages of cycling, the mechanisms are altered again: NaF, Cu₂S, and Cu_7.2S₄ appeared in the discharged state, while NaF and Cu₅FeS₄ are observed in the charged state. In contrast to a typical conversion reaction, nanocrystalline phases play the dominant role, which are responsible for the high reversible capacity and long-term stability.

Structural Evolution of Layered Manganese Oxysulfides during Reversible Electrochemical Lithium Insertion and Copper Extrusion

The electrochemical lithiation and delithiation of the layered oxysulfide Sr₂MnO₂Cu_4-δS₃ has been investigated by using a combination of in situ powder X-ray diffraction and ex situ neutron powder diffraction, X-ray absorption and ⁷Li NMR spectroscopy, together with a range of electrochemical experiments. Sr₂MnO₂Cu_4-δS₃ consists of [Sr₂MnO₂] perovskite-type cationic layers alternating with highly defective antifluorite-type [Cu_4-δS₃] (δ ≈ 0.5) anionic layers. It undergoes a combined displacement/intercalation (CDI) mechanism on reaction with Li, where the inserted Li replaces Cu, forming Li₄S₃ slabs and Cu⁺ is reduced and extruded as metallic particles. For the initial 2-3% of the first discharge process, the vacant sites in the sulfide layer are filled by Li; Cu extrusion then accompanies further insertion of Li. Mn^2.5+ is reduced to Mn²⁺ during the first half of the discharge. The overall charging process involves the removal of Li and re-insertion of Cu into the sulfide layers with re-oxidation of Mn²⁺ to Mn^2.5+. However, due to the different diffusivities of Li and Cu, the processes operating on charge are quite different from those operating during the first discharge: charging to 2.75 V results in the removal of most of the Li, little reinsertion of Cu, and good capacity retention. A charge to 3.75 V is required to fully reinsert Cu, which results in significant changes to the sulfide sublattice during the following discharge and poor capacity retention. This detailed structure-property investigation will promote the design of new functional electrodes with improved device performance.

Relating voltage and thermal safety in Li-ion battery cathodes: a high-throughput computational study

High voltage and high thermal safety are desirable characteristics of cathode materials, but difficult to achieve simultaneously DFT calculations on >1400 Li ion battery cathode materials indicate a complex inverse relationship between voltage and thermal safety.

Electrochemical properties of nanostructured copper hydroxysulfate mineral brochantite upon reaction with lithium

Cu-containing conversion electrodes have received much study as high capacity electrodes for lithium-ion batteries, but many suffer from poor reversibility. The electrochemical properties of the copper hydroxysulfate compound, Cu4(OH)6SO4, more commonly known as the mineral brochantite and as a patina constituent on the Statue of Liberty, were investigated. Nanostructured brochantite was synthesized using precipitation and microwave-assisted hydrothermal reactions and evaluated in half-cells with Li metal counter electrodes. Reversible capacities >400 mAh/g corresponding to the 2 electron reduction of Cu(2+) and discharge potential of 1.8 V versus Li/Li(+) were observed in brochantite with a nanoplate morphology. Detailed characterization using X-ray diffraction, scanning and transmission electron microscopy, and X-ray photoelectron spectroscopy was performed to better understand the conversion process.