Multi-reservoir device for detecting a soluble cancer biomarker

Involvement of human chorionic gonadotropin in regulating vasculogenic mimicry and hypoxia-inducible factor-1α expression in ovarian cancer cells

BACKGROUND

Human chorionic gonadotropin (hCG) can play a crucial role in angiogenesis. In the present study, we focused on hCG to gain insight into its potential effects on vasculogenic mimicry (VM) in ovarian cancer cells.

METHODS

Ovarian cancer OVCAR-3 cells were incubated with different concentrations of recombinant hCG in 3-dimensional cultures. VM was identified by morphological observations and vascular endothelial cell marker detection in OVCAR-3 cells. Expression of hCG, hypoxia-inducible factor-1α (HIF-1α), and the endothelial cell markers CD31, VEGF, and factor VIII were detected by reverse transcription polymerase chain reaction and western blotting. The effect of hCG on endothelial cell-marker expression in ovarian cancer cells was further explored using small interfering RNA (siRNA) and plasmid-based approaches.

RESULTS

Incubation of OVCAR-3 cells with recombinant hCG induced vessel-like network formation, which was accompanied by significant elevation of vascular marker expression. Attenuation of hCG expression by siRNA in OVCAR-3 cells suppressed the expression of endothelial cell markers and HIF-1α by tumour cells. Overexpression of hCG in OVCAR-3 cells resulted in increased expression of endothelial cell markers and HIF-1α.

CONCLUSIONS

HCG was crucial for changing the phenotype of OVCAR-3 cells to endothelial-like cells. The effect of hCG induction on VM in ovarian cancer cells is potentially associated with HIF-1α.

Homogeneous Biosensing Based on Magnetic Particle Labels

The growing availability of biomarker panels for molecular diagnostics is leading to an increasing need for fast and sensitive biosensing technologies that are applicable to point-of-care testing. In that regard, homogeneous measurement principles are especially relevant as they usually do not require extensive sample preparation procedures, thus reducing the total analysis time and maximizing ease-of-use. In this review, we focus on homogeneous biosensors for the in vitro detection of biomarkers. Within this broad range of biosensors, we concentrate on methods that apply magnetic particle labels. The advantage of such methods lies in the added possibility to manipulate the particle labels by applied magnetic fields, which can be exploited, for example, to decrease incubation times or to enhance the signal-to-noise-ratio of the measurement signal by applying frequency-selective detection. In our review, we discriminate the corresponding methods based on the nature of the acquired measurement signal, which can either be based on magnetic or optical detection. The underlying measurement principles of the different techniques are discussed, and biosensing examples for all techniques are reported, thereby demonstrating the broad applicability of homogeneous in vitro biosensing based on magnetic particle label actuation.

Effects of HCG on human epithelial ovarian cancer vasculogenic mimicry formation in vivo

Ovarian cancer is the leading cause of mortality due to gynecological malignancy, and vasculogenic mimicry (VM) formation is correlated with poor prognosis. In a previous study, the present authors observed that human chorionic gonadotropin (HCG) could promote VM formation in three-dimensional OVCAR-3 cell cultures. In order to investigate whether HCG could promote VM formation in ovarian cancer in vivo, the role of OVCAR-3 cells overexpressing or depleted of chorionic gonadotropin, beta polypeptide 5 (CGB5, which is the fifth subunit of β-HCG and was identified as the key part of HCG) were injected into nude mice in the present study, while BeWo cells were used as a positive control. The results demonstrated that overexpressed CGB5 promoted xenografts tumor formation in nude mice, and the results of hematoxylin and eosin and cluster of differentiation (CD)34-periodic acid-Schiff dual staining revealed that CGB5 promoted VM formation. Furthermore, reverse transcription-polymerase chain reaction and immunochemistry staining demonstrated that the expression of the vascular markers CD31, vascular endothelial growth factor and factor VIII was also upregulated in the CGB5-overexpressing xenografts tumors. In addition, the expression of luteinizing hormone receptor (LHR), the receptor of CGB5, was increased in CGB5-overexpressing cells. In conclusion, CGB5 may promote tumor growth and VM formation via activation of the LHR signal transduction pathway, which may support a novel strategy for ovarian cancer therapy.

Miniaturized, biopsy-implantable chemical sensor with wireless, magnetic resonance readout

Biopsy is an important diagnostic tool for a broad range of conditions. Cancer diagnoses, for example, are confirmed using tissue explanted with biopsy. Here we demonstrate a miniaturized wireless sensor that can be implanted during a biopsy procedure and return chemical information from within the body. Power and readout are wireless via weak magnetic resonant coupling to an external reader. The sensor is filled with responsive nuclear magnetic resonance (NMR) contrast agents for chemical sensitivity, and on-board circuitry constrains the NMR measurement to the contents. This sensor enables longitudinal monitoring of the same location, and its simple readout mechanism is ideal for applications not requiring the spatial information available through imaging techniques. We demonstrated the operation of this sensor by measuring two metabolic markers, both in vitro and in vivo: pH in flowing fluid for over 25 days and in a xenograft tumor model in mice, and oxygen in flowing gas and in a rat hind-limb constriction experiment. The results suggest that this in vivo sensing platform is generalizable to other available NMR contrast agents. These sensors have potential for use in biomedicine, environmental monitoring and quality control applications.

Surface treatments for microfluidic biocompatibility

Microfluidic systems allow small volumes of liquids to be manipulated, either by being passed through channels or moved around as liquid droplets. Such systems have been developed to separate, purify, analyze, and deliver molecules to reaction zones. Although volumes are small, reaction rates, catalysis, mixing, and heat transfer can be high, enabling the accurate sensing of tiny quantities of agents and the synthesis of novel products. The incorporation of multiple components, such as pumps, valves, mixers, and heaters, onto a single microfluidic platform has brought about the field of lab-on-a-chip devices or micro total analysis systems (μTAS). Although used in the research laboratory for numerous years, few of these devices have made it into the commercial market, due to their complexity of fabrication and limited choice of material. As the dimensions of these systems become smaller, interfacial interactions begin to dominate in terms of device performance. Appropriate selection of bulk materials, or the application of surface coatings, can allow control over surface properties, such as the adsorption of (bio)molecules. Here we review current microfluidic technology in terms of biocompatibility issues, examining the use of modification strategies to improve device longevity and performance.

Colloidal nanomaterial-based immunoassay

Nanomaterials have been widely developed for their use in nanomedicine, especially for immunoassay-based diagnosis. In this review we focus on the use of nanomaterials as a nanoplatform for colloidal immunoassays. While conventional heterogeneous immunoassays suffer from mass transfer limitations and consequently long assay time, colloidal immunosupports allow target capture in the entire volume, thus speeding up reaction kinetics and shortening assay time. Owing to their wide range of chemical and physical properties, nanomaterials are an interesting candidate for immunoassay development. The most popular colloidal nanomaterials for colloidal immunoassays will be discussed, as well as their influence on immune reactions. Recent advances in nanomaterial applications for different formats of immunoassays will be reported, such as nanomaterial-based indirect immunoassays, optical-based agglutination immunoassays, resonance energy transfer-based immunoassays and magnetic relaxation-based immunoassays. Finally, the future of using nanomaterials for homogeneous immunoassays dedicated to clinical diagnosis will be discussed.

A cerium oxide nanoparticle-based device for the detection of chronic inflammation via optical and magnetic resonance imaging

Monitoring of microenvironmental parameters is critical in healthcare and disease management. Harnessing the antioxidant activity of nanoceria and the imaging capabilities of iron oxide nanoparticles in a device setup, we were able to image changes in the device's aqueous milieu. The device was able to convey and process changes in the microenvironment's pH and reactive oxygen species' concentration, distinguishing physiological from abnormal levels. As a result under physiological and transient inflammatory conditions, the device's fluorescence and magnetic resonance signals, emanating from multimodal iron oxide nanoparticles, were similar. However, under chronic inflammatory conditions that are usually associated with high local concentrations of reactive oxygen species and pH decrease, the device's output was considerably different. Specifically, the device's fluorescence emission significantly decreased, while the magnetic resonance signal T2 increased. Further studies identified that the changes in the device's output are attributed to inactivation of the sensing component's nanoceria that prevents it from successfully scavenging the generated free radicals. Interestingly, the buildup of free radical excess led to polymerization of the iron oxide nanoparticle's coating, with concomitant formation of micron size aggregates. Our studies indicate that a nanoceria-based device can be utilized for the monitoring of pro-inflammatory biomarkers, having important applications in the management of numerous ailments while eliminating nanoparticle toxicity issues.

Role of hCG in vasculogenic mimicry in OVCAR-3 ovarian cancer cell line

OBJECTIVES

Vasculogenic mimicry (VM) is induced by hypoxia in 3-dimensional culture of ovarian cancer cells. By using this 3D model system, we explored the expression of human chorionic gonadotropin (hCG) and its effects on VM formation in ovarian cancer cell line OVCAR-3 both under normoxic and hypoxic conditions.

METHODS

Vasculogenic mimicry was identified by morphological observation and detection of vascular cell marker expressed by OVCAR-3. Potential formation of tumor channels was observed by light microscopy and scanning electron microscopy. Expression of vascular cell marker CD31, vascular endothelial growth factor, and Factor VIII were detected by flow cytometry, immunochemistry, and Western blot. Expression of hCG was investigated by enzyme-linked immunosorbent assay, chemiluminescence immunoassay, real-time polymerase chain reaction (PCR), and Western blot. Expression of hypoxia-inducible factor-1α (HIF-1α) was detected by real-time PCR, Western blot, and blocked by small interference RNA. Incubation of OVCAR-3 with recombinant hCG was used to evaluate its effect on VM formation. The specificity of the effect of hCG was assessed by inhibition with the neutralizing anti-hCG antibody.

RESULTS

OVCAR-3 cells formed vessel-like network structures and expressed vascular marker significantly under hypoxia in 3D. The expression level of hCG under hypoxia was significantly higher than that under normoxia. Attenuating hypoxia-inducible factor (HIF)-1α expression via small interference RNA resulted in a significantly decreased hCG expression in OVCAR-3, which indicated that the effect of hypoxia on hCG expression was mediated through HIF-1α. Treatment of OVCAR-3 with 5000 mU/mL hCG resulted in the presence of tumor cell-lined vasculature and significant elevation in vascular marker expression, even under normoxia. Expression level of vascular marker and HIF-1α in OVCAR-3 increased in response to hCG treatment in a dose-dependent manner. The effect of hCG was inhibited by the neutralizing anti-hCG antibody.

CONCLUSIONS

Human chorionic gonadotropin has the potential to induce VM in OVCAR-3. Human chorionic gonadotropin might have synergistic hypoxia-induced effect on vascular marker and HIF-1α expression.

Particles and microfluidics merged: perspectives of highly sensitive diagnostic detection

There is a growing need for diagnostic technologies that provide laboratories with solutions that improve quality, enhance laboratory system productivity, and provide accurate detection of a broad range of infectious diseases and cancers. Recent advances in micro- and nanoscience and engineering, in particular in the areas of particles and microfluidic technologies, have advanced the "lab-on-a-chip" concept towards the development of a new generation of point-of-care diagnostic devices that could significantly enhance test sensitivity and speed. In this review, we will discuss many of the recent advances in microfluidics and particle technologies with an eye towards merging these two technologies for application in medical diagnostics. Although the potential diagnostic applications are virtually unlimited, the most important applications are foreseen in the areas of biomarker research, cancer diagnosis, and detection of infectious microorganisms.

Current trends in nanobiosensor technology

The development of tools and processes used to fabricate, measure, and image nanoscale objects has lead to a wide range of work devoted to producing sensors that interact with extremely small numbers (or an extremely small concentration) of analyte molecules. These advances are particularly exciting in the context of biosensing, where the demands for low concentration detection and high specificity are great. Nanoscale biosensors, or nanobiosensors, provide researchers with an unprecedented level of sensitivity, often to the single molecule level. The use of biomolecule-functionalized surfaces can dramatically boost the specificity of the detection system, but can also yield reproducibility problems and increased complexity. Several nanobiosensor architectures based on mechanical devices, optical resonators, functionalized nanoparticles, nanowires, nanotubes, and nanofibers have been demonstrated in the lab. As nanobiosensor technology becomes more refined and reliable, it is likely it will eventually make its way from the lab to the clinic, where future lab-on-a-chip devices incorporating an array of nanobiosensors could be used for rapid screening of a wide variety of analytes at low cost using small samples of patient material.

Scaling of transverse nuclear magnetic relaxation due to magnetic nanoparticle aggregation

The aggregation of superparamagnetic iron oxide (SPIO) nanoparticles decreases the transverse nuclear magnetic resonance (NMR) relaxation time T2CP of adjacent water molecules measured by a Carr-Purcell-Meiboom-Gill (CPMG) pulse-echo sequence. This effect is commonly used to measure the concentrations of a variety of small molecules. We perform extensive Monte Carlo simulations of water diffusing around SPIO nanoparticle aggregates to determine the relationship between T2CP and details of the aggregate. We find that in the motional averaging regime T2CP scales as a power law with the number N of nanoparticles in an aggregate. The specific scaling is dependent on the fractal dimension d of the aggregates. We find T2CP∝N-0.44 for aggregates with d = 2.2, a value typical of diffusion limited aggregation. We also find that in two-nanoparticle systems, T2CP is strongly dependent on the orientation of the two nanoparticles relative to the external magnetic field, which implies that it may be possible to sense the orientation of a two-nanoparticle aggregate. To optimize the sensitivity of SPIO nanoparticle sensors, we propose that it is best to have aggregates with few nanoparticles, close together, measured with long pulse-echo times.

Magnetic nanoparticle biosensors

One of the major challenges in medicine is the rapid and accurate measurement of protein biomarkers, cells, and pathogens in biological samples. A number of new diagnostic platforms have recently been developed to measure biomolecules and cells with high sensitivity that could enable early disease detection or provide valuable insights into biology at the systems level. Most biological samples exhibit negligible magnetic susceptibility; therefore, magnetic nanoparticles have been used for diverse applications including biosensing, magnetic separation, and thermal ablation therapy. This review focuses on the use of magnetic nanoparticles for detection of biomolecules and cells based on magnetic resonance effects using a general detection platform termed diagnostic magnetic resonance (DMR). DMR technology encompasses numerous assay configurations and sensing principles, and to date magnetic nanoparticle biosensors have been designed to detect a wide range of targets including DNA/mRNA, proteins, enzymes, drugs, pathogens, and tumor cells. The core principle behind DMR is the use of magnetic nanoparticles as proximity sensors that modulate the spin-spin relaxation time of neighboring water molecules, which can be quantified using clinical MRI scanners or benchtop nuclear magnetic resonance (NMR) relaxometers. Recently, the capabilities of DMR technology were advanced considerably with the development of miniaturized, chip-based NMR (microNMR) detector systems that are capable of performing highly sensitive measurements on microliter sample volumes and in multiplexed format. With these and future advances in mind, DMR biosensor technology holds considerable promise to provide a high-throughput, low-cost, and portable platform for large scale molecular and cellular screening in clinical and point-of-care settings.

Magnetic nanoparticle sensors

Many types of biosensors employ magnetic nanoparticles (diameter = 5–300 nm) or magnetic particles (diameter = 300–5,000 nm) which have been surface functionalized to recognize specific molecular targets. Here we cover three types of biosensors that employ different biosensing principles, magnetic materials, and instrumentation. The first type consists of magnetic relaxation switch assay-sensors, which are based on the effects magnetic particles exert on water proton relaxation rates. The second type consists of magnetic particle relaxation sensors, which determine the relaxation of the magnetic moment within the magnetic particle. The third type is magnetoresistive sensors, which detect the presence of magnetic particles on the surface of electronic devices that are sensitive to changes in magnetic fields on their surface. Recent improvements in the design of magnetic nanoparticles (and magnetic particles), together with improvements in instrumentation, suggest that magnetic material-based biosensors may become widely used in the future.

Implantable diagnostic device for cancer monitoring

Biopsies provide required information to diagnose cancer but, because of their invasiveness, they are difficult to use for managing cancer therapy. The ability to repeatedly sample the local environment for tumor biomarker, chemotherapeutic agent, and tumor metabolite concentrations could improve early detection of metastasis and personalized therapy. Here we describe an implantable diagnostic device that senses the local in vivo environment. This device, which could be left behind during biopsy, uses a semi-permeable membrane to contain nanoparticle magnetic relaxation switches. A cell line secreting a model cancer biomarker produced ectopic tumors in mice. The transverse relaxation time (T(2)) of devices in tumor-bearing mice was 20+/-10% lower than devices in control mice after 1 day by magnetic resonance imaging (p<0.01). Short term applications for this device are numerous, including verification of successful tumor resection. This may represent the first continuous monitoring device for soluble cancer biomarkers in vivo.

Microfabricated implants for applications in therapeutic delivery, tissue engineering, and biosensing

By adapting microfabrication techniques originally developed in the microelectronics industry novel devices for drug delivery, tissue engineering and biosensing have been engineered for in vivo use. Implant microfabrication uses a broad range of techniques including photolithography, and micromachining to create devices with features ranging from 0.1 to hundreds of microns with high aspect ratios and precise features. Microfabrication offers device feature scale that is relevant to the tissues and cells to which they are applied, as well as offering ease of en masse fabrication, small device size, and facile incorporation of integrated circuit technology. Utilizing these methods, drug delivery applications have been developed for in vivo use through many delivery routes including intravenous, oral, and transdermal. Additionally, novel microfabricated tissue engineering approaches propose therapies for the cardiovascular, orthopedic, and ocular systems, among others. Biosensing devices have been designed to detect a variety of analytes and conditions in vivo through both enzymatic-electrochemical reactions and sensor displacement through mechanical loading. Overall, the impact of microfabricated devices has had an impact over a broad range of therapies and tissues. This review addresses many of these devices and highlights their fabrication as well as discusses materials relevant to microfabrication techniques.

Electrode chemistry yields a nanoparticle-based NMR sensor for calcium

Magnetic nanoparticles (NPs) have been used to obtain NMR-based sensors for analytes ranging from small molecules to viruses by the conjugation of biomolecules (antibodies, proteins, oligonucleotides) to the surface of NPs. In the presence of an analyte, the NPs form clusters that alter the relaxation time of the surrounding water protons. Here, we show that an organic molecule that binds calcium ions of nonbiological origin, rather than a biomolecule, can be employed to modify the surface of a magnetic NP. When calcium ions are added, they induce NP clustering, providing an NMR-based sensor for these ions. Our work suggests that the many chemistries of nonbiological origin, such as those employed for ion-selective electrodes, can be adapted to obtain NMR-based sensors for ions.

Amino alcohol-based degradable poly(ester amide) elastomers

Currently available synthetic biodegradable elastomers are primarily composed of crosslinked aliphatic polyesters, which suffer from deficiencies including (1) high crosslink densities, which results in exceedingly high stiffness, (2) rapid degradation upon implantation, or (3) limited chemical moieties for chemical modification. Herein, we have developed poly(1,3-diamino-2-hydroxypropane-co-polyol sebacate)s, a new class of synthetic, biodegradable elastomeric poly(ester amide)s composed of crosslinked networks based on an amino alcohol. These crosslinked networks feature tensile Young's modulus on the order of 1MPa and reversable elongations up to 92%. These polymers exhibit in vitro and in vivo biocompatibility. These polymers have projected degradation half-lives up to 20 months in vivo.