Green Formulation of Spironolactone Loaded Chitosan-Coated Nano Lipid Carrier for Treatment of Acne Vulgaris: A Randomized Double-Blind Clinical Trial

Purpose

Spironolactone (SPN), which is classified as an anti-androgen, has demonstrated efficacy in treating acne. This study aimed to utilize ultrasonication to create a chitosan-coated nano lipid carrier (NLC) for enhancing the delivery of SPN to the skin and treating acne.

Methods

Various hydrophilic-lipophilic balance (HLB) values were investigated to optimize the SPN-NLCs. Photon correlation spectroscopy, attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC) were employed to characterize the solid state of SPN in nanoparticle form. Additionally, the optimized formulation was used in a double-blind, randomized clinical trial.

Results

Reducing the HLB of the surfactant mixtures resulted in a reduction in the size of SPNNLCs. The formula with the smallest particle diameter (238.4±0.74 nm) and the lowest HLB value (9.65) exhibited the highest encapsulation efficiency (EE) of 79.88±1.807%. Coating the optimized SPN-NLC with chitosan increased the diameter, polydispersity index (PDI), zeta potential (ZP), and EE. In vitro skin absorption studies demonstrated sustained release profiles for chitosan-coated SPN-NLC. In the double-blind trial, a gel containing chitosan-coated SPN-NLC effectively treated mild to moderate acne vulgaris, leading to improved healing and reduced lesion count after 8 weeks of therapy compared to the placebo. It successfully addressed both non-inflammatory and inflammatory lesions without adverse effects on the skin.

Conclusion

The findings indicate that chitosan-coated SPN-NLCs have the potential as nanoparticles for targeted SPN delivery to the skin, offering novel options for the treatment of acne vulgaris.

Chitosan and Its Derivatives: Preparation and Antibacterial Properties

This comprehensive review illuminates the various methods of chitosan extraction, its antibacterial properties, and its multifarious applications in diverse sectors. We delve into chemical, physical, biological, hybrid, and green extraction techniques, each of which presents unique advantages and disadvantages. The choice of method is dictated by multiple variables, including the desired properties of chitosan, resource availability, cost, and environmental footprint. We explore the intricate relationship between chitosan's antibacterial activity and its properties, such as cationic density, molecular weight, water solubility, and pH. Furthermore, we spotlight the burgeoning applications of chitosan-based materials like films, nanoparticles, nonwoven materials, and hydrogels across the food, biomedical, and agricultural sectors. The review concludes by highlighting the promising future of chitosan, underpinned by technological advancements and growing sustainability consciousness. However, the critical challenges of optimizing chitosan's production for sustainability and efficiency remain to be tackled.

Chitosan-Based Nanocomposites for Glyphosate Detection Using Surface Plasmon Resonance Sensor

This article describes an optical method based on the association of surface plasmon resonance (SPR) with chitosan (CS) film and its nanocomposites, including zinc oxide (ZnO) or graphene oxide (GO) for glyphosate detection. CS and CS/ZnO or CS/GO thin films were deposited on an Au chip using the spin coating technique. The characterization, morphology, and composition of these films were performed by Fourier-transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), and contact angle technique. Sensor preparation conditions including the cross-linking and mobile phase (pH and salinity) were investigated and thoroughly optimized. Results showed that the CS/ZnO thin-film composite provides the highest sensitivity for glyphosate sensing with a low detection limit of 8 nM and with high reproducibility. From the Langmuir-type adsorption model and the effect of ionic strength, the adsorption mechanisms of glyphosate could be controlled by electrostatic and steric interaction with possible formation of 1:1 outer-sphere surface complexes. The selectivity of the optical method was investigated with respect to the sorption of glyphosate metabolite (aminomethylphosphonic acid) (AMPA), glufosinate, and one of the glufonisate metabolites (3-methyl-phosphinico-propionic acid) (MPPA). Results showed that the SPR sensor offers a very good selectivity for glyphosate, but the competition of other molecules could still occur in aqueous systems.

Polysaccharides as the Sensing Material for Metal Ion Detection-Based Optical Sensor Applications

The incorporation of a proper sensing material towards the construction of high selectivity optical sensing devices is vital. Polysaccharides, such as chitosan and carrageenan, are among the bio-based sensing materials that are extensively employed due to their remarkable physicochemical attributes. This paper highlights the critical aspects of the design of suitable polysaccharides for the recognition of specific analytes through physical and chemical modifications of polysaccharide structure. Such modifications lead to the enhancement of physicochemical properties of polysaccharides and optical sensor performance. Chitosan and carrageenan are two materials that possess excellent features which are capable of sensing target analytes via various interactions. The interaction between polysaccharides and analytes is dependent on the availability of functional groups in their structure. The integration of polysaccharides with various optical sensing techniques further improves optical sensor performance. The application of polysaccharides as sensing materials in various optical sensing techniques is also highlighted, particularly for metal ion sensing.

Development of Biopolymer and Conducting Polymer-Based Optical Sensors for Heavy Metal Ion Detection

Great efforts have been devoted to the invention of environmental sensors as the amount of water pollution has increased in recent decades. Chitosan, cellulose and nanocrystalline cellulose are examples of biopolymers that have been intensively studied due to their potential applications, particularly as sensors. Furthermore, the rapid use of conducting polymer materials as a sensing layer in environmental monitoring has also been developed. Thus, the incorporation of biopolymer and conducting polymer materials with various methods has shown promising potential with sensitively and selectively toward heavy metal ions. In this feature paper, selected recent and updated investigations are reviewed on biopolymer and conducting polymer-based materials in sensors aimed at the detection of heavy metal ions by optical methods. This review intends to provide sufficient evidence of the potential of polymer-based materials as sensing layers, and future outlooks are considered in developing surface plasmon resonance as an excellent and valid sensor for heavy metal ion detection.

Determining the Subnanometer Thickness of the Water-Depletion Layer at the Interface between Water and the Hydrophobic Substrate

Surface plasmon resonance (SPR) is one of the most popular and powerful techniques for label-free detecting and quantitatively analyzing the interfacial refractive index (RI). So far, most of the SPR measurements are mainly applied to detect the relative change of RI upon biological and chemical events occurring at the interface, while the determinations on the absolute value of RI remains challenging. However, the absolute value of RI has become increasingly urgent in some cases, such as the existence and physical properties of the water depletion layer (WDL). WDL refers to a subnanometer-thick layer with reduced density between water and the hydrophobic substrate. The detailed explanations of how water meets hydrophobic surface have been studied by several kinds of techniques for decades but it remains under debate. In this work, we successfully established a method to measure the absolute RI at a gold-liquid interface by surface plasmon resonance microscopy (SPRM) and 2D Fourier transformation image processing and further applied this method to study the existence and physical nature of WDL. It was found that a 0.6 nm thick WDL existed at the interface of water and the hydrophobic substrate, leading to a reduced refractive index of 1.3295 ± 0.0006 compared with the standard value of 1.3325. Our results further indicated that the WDL consisted of a uniform layer rather than numerous isolated surface nanobubbles that distributed at the interface with high density.

Ochratoxin A detection in coffee by competitive inhibition assay using chitosan-based surface plasmon resonance compact system

This study demonstrates the evaluation of ochratoxin A (OTA) in coffee on compact surface plasmon resonance (SPR) biosensors based on crosslinked chitosan and carboxymethyl chitosan nanomatrix substrates. Ochratoxin A is a toxic secondary metabolite widely produced by Aspergillus and Penicillium fungi and requires regular quantification and detection in food samples. The gold coated SPR chips were synthesized with chitosan and carboxymethyl chitosan through spin coating technique. The SPR nanomatrix chips were used for the immobilization of ochratoxin A-bovine serum albumin (OTA-BSA) conjugate to develop a competitive inhibition immunoassay. The monoclonal ochratoxin A antibodies (mAb-OTA) were used as biological receptors for the detection of OTA in buffer and coffee samples. The limit of detection (LOD) in coffee for chitosan (CS) and carboxymethyl chitosan (CMC) substrates was 5.7 ng/mL and 3.8 ng/mL, respectively. Compact surface plasmon resonance (SPR) system based on chitosan-based (CS-AU) nanomatrix substrates provides a platform for the detection of ochratoxin A with high sensitivity, accuracy, ease-of-use and cost-effectiveness. This compact SPR system can be used at farm and industrial levels for the detection of OTA in food matrices.

Binding Affinity of a Highly Sensitive Au/Ag/Au/Chitosan-Graphene Oxide Sensor Based on Direct Detection of Pb2+ and Hg2+ Ions

The study of binding affinity is essential in surface plasmon resonance (SPR) sensing because it allows researchers to quantify the affinity between the analyte and immobilised ligands of an SPR sensor. In this study, we demonstrate the derivation of the binding affinity constant, K, for Pb²⁺ and Hg²⁺ ions according to their SPR response using a gold/silver/gold/chitosan-graphene oxide (Au/Ag/Au/CS-GO) sensor for the concentration range of 0.1-5 ppm. The higher affinity of Pb²⁺ to binding with the CS-GO sensor explains the outstanding sensitivity of 2.05 °ppm^-1 against 1.66 °ppm^-1 of Hg²⁺. The maximum signal-to-noise ratio (SNR) upon detection of Pb²⁺ is 1.53, and exceeds the suggested logical criterion of an SNR. The Au/Ag/Au/CS-GO SPR sensor also exhibits excellent repeatability in Pb²⁺ due to the strong bond between its functional groups and this cation. The adsorption data of Pb²⁺ and Hg²⁺ on the CS-GO sensor fits well with the Langmuir isotherm model where the affinity constant, K, of Pb²⁺ and Hg²⁺ ions is computed. The affinity of Pb²⁺ ions to the Au/Ag/Au/CS-GO sensor is significantly higher than that of Hg²⁺ based on the value of K, 7 × 10⁵ M^-1 and 4 × 10⁵ M^-1, respectively. The higher shift in SPR angles due to Pb²⁺ and Hg²⁺ compared to Cr³⁺, Cu²⁺ and Zn²⁺ ions also reveals the greater affinity of the CS-GO SPR sensor to them, thus supporting the rationale for obtaining K for these two heavy metals. This study provides a better understanding on the sensing performance of such sensors in detecting heavy metal ions.

A glycosylation strategy to develop a low toxic naphthalimide fluorescent probe for the detection of Fe3+in aqueous medium

A glycosylation strategy based on click chemistry was employed to develop a naphthalimide-based Fe³⁺fluorescent probe with low cytotoxicity and good water-solubility.

A metal-responsive interdigitated bilayer for selective quantification of mercury(ii) traces by surface plasmon resonance

An innovative design of reusable SPR chips allowing the quantitative and selective determination of mercury(ii) at the ppt level is reported.

Optical sensor: a promising strategy for environmental and biomedical monitoring of ionic species

In this review, we cover the recent developments in fluorogenic and chromogenic sensors for Cu²⁺, Fe²⁺/Fe³⁺, Zn²⁺and Hg²⁺.

Environmental applications of chitosan and its derivatives

Chitosan originates from the seafood processing industry and is one of the most abundant of bio-waste materials. Chitosan is a by-product of the alkaline deacetylation process of chitin. Chemically, chitosan is a polysaccharide that is soluble in acidic solution and precipitates at higher pHs. It has great potential for certain environmental applications, such as remediation of organic and inorganic contaminants, including toxic metals and dyes in soil, sediment and water, and development of contaminant sensors. Traditionally, seafood waste has been the primary source of chitin. More recently, alternative sources have emerged such as fungal mycelium, mushroom and krill wastes, and these new sources of chitin and chitosan may overcome seasonal supply limitations that have existed. The production of chitosan from the above-mentioned waste streams not only reduces waste volume, but alleviates pressure on landfills to which the waste would otherwise go. Chitosan production involves four major steps, viz., deproteination, demineralization, bleaching and deacetylation. These four processes require excessive usage of strong alkali at different stages, and drives chitosan's production cost up, potentially making the application of high-grade chitosan for commercial remediation untenable. Alternate chitosan processing techniques, such as microbial or enzymatic processes, may become more cost-effective due to lower energy consumption and waste generation. Chitosan has proved to be versatile for so many environmental applications, because it possesses certain key functional groups, including - OH and -NH2 . However, the efficacy of chitosan is diminished at low pH because of its increased solubility and instability. These deficiencies can be overcome by modifying chitosan's structure via crosslinking. Such modification not only enhances the structural stability of chitosan under low pH conditions, but also improves its physicochemical characteristics, such as porosity, hydraulic conductivity, permeability, surface area and sorption capacity. Crosslinked chitosan is an excellent sorbent for trace metals especially because of the high flexibility of its structural stability. Sorption of trace metals by chitosan is selective and independent of the size and hardness of metal ions, or the physical form of chitosan (e.g., film, powder and solution). Both -OH and -NH2 groups in chitosan provide vital binding sites for complexing metal cations. At low pH, -NH3 + groups attract and coagulate negatively charged contaminants such as metal oxyanions, humic acids and dye molecules. Grafting certain functional molecules into the chitin structure improves sorption capacity and selectivity for remediating specific metal ions. For example, introducing sulfur and nitrogen donor ligands to chitosan alters the sorption preference for metals. Low molecular weight chitosan derivatives have been used to remediate metal contaminated soil and sediments. They have also been applied in permeable reactive barriers to remediate metals in soil and groundwater. Both chitosan and modified chitosan have been used to phytoremediate metals; however, the mechanisms by which they assist in mobilizing metals are not yet well understood. In addition, microbes have been used in combination with chitosan to remediate metals (e.g., Cu and Zn) in contaminated soils. Chitosan has also been used to remediate organic contaminants, such as oil-based wastewater, dyes, tannins, humic acids, phenols, bisphenoi-A, p-benzoquinone, organo-phosphorus insecticides, among others. Chitosan has also been utilized to develop optical and electrochemical sensors for in-situ detection of trace contaminants. In sensor technology, naturally-derived chitosan is used primarily as an immobilizing agent that results from its enzyme compatibility, and stabilizing effect on nanoparticles. Contaminant-sensing agents, such as enzymes, microbes and nanoparticles, have been homogeneously immobilized in chitosan gels by using coagulating (e.g., alginate, phosphate) or crosslinking agents (e.g., GA, ECH). Such immobilization maintains the stability of sensing elements in the chitosan gel phase, and prevents inactivation and loss of the sensing agent. In this review, we have shown that chitosan, an efficient by-product of a waste biomaterial, has great potential for many environmental applications. With certain limitations, chitosan and its derivatives can be used for remediating contaminated soil and wastewater. Notwithstanding, further research is needed to enhance the physicochemical properties of chitosan and mitigate its deficiencies.

Chitosan as a sustainable organocatalyst: a concise overview

Increased demand for more sustainable materials and chemical processes has tremendously advanced the use of polysaccharides, which are natural biopolymers, in domains such as adsorption, catalysis, and as an alternative chemical feedstock. Among these biopolymers, the use of chitosan, which is obtained by deacetylation of natural chitin, is on the increase due to the presence of amino groups on the polymer backbone that makes it a natural cationic polymer. The ability of chitosan-based materials to form open-network, macroporous, high-surface-area hydrogels with accessible basic surface sites has enabled their use not only as macrochelating ligands for active metal catalysts and as a support to disperse nanosized particles, but also as a direct organocatalyst. This review provides a concise overview of the use of native and modified chitosan, possessing different textural properties and chemical properties, as organocatalysts. Organocatalysis with chitosan is primarily focused on carbon-carbon bond-forming reactions, multicomponent heterocycle formation reactions, biodiesel production, and carbon dioxide fixation through [3+2] cycloaddition. Furthermore, the chiral, helical organization of the chitosan skeleton lends itself to use in enantioselective catalysis. Chitosan derivatives generally display reactivity similar to homogeneous bases, ionic liquids, and organic and inorganic salts. However, the introduction of cooperative acid-base interactions at active sites substantially enhances reactivity. These functional biopolymers can also be easily recovered and reused several times under solvent-free conditions. These accomplishments highlight the important role that natural biopolymers play in furthering more sustainable chemistry.

Novel and green synthesis of high-fluorescent carbon dots originated from honey for sensing and imaging

An innovative and green strategy to synthesize carbon dots (CDs) with a quantum yield (QY) of nearly 19.8% has been successfully established for the first time. Subsequently, the possible fluorescence (FL) mechanism was elucidated by fluorescence, UV-vis, high resolution transmission electron microscope (HR-TEM), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses. Significantly, not only the precursor of CDs and whole synthesis procedure was green, but also the CDs obtained here exhibited various advantages including high fluorescent QY, excellent photostability, non-toxicity and satisfactory stability. Additionally, the CDs were employed for assaying Fe(3+) based on direct interactions between Fe(3+) and − COOH, − OH and − NH2 of CDs, resulting in aggregations that facilitate to quench their fluorescence. The decrease of fluorescence intensity permitted detections of Fe(3+) in a linear range of 5.0 × 10(-9)-1.0 × 10(-4)mol/L, with a detection limit of 1.7 × 10(-9)mol/L at a signal-to-noise ratio of 3, suggesting a promising assay for Fe(3+). Eventually, the CDs were applied for cell imaging and coding, demonstrating their potential towards diverse applications.

A simple small size and low cost sensor based on surface plasmon resonance for selective detection of Fe(III)

A simple, small size, and low cost sensor based on a Deferoxamine Self Assembled Monolayer (DFO-SAM) and Surface Plasmon Resonance (SPR) transduction, in connection with a Plastic Optical Fiber (POF), has been developed for the selective detection of Fe(III). DFO-SAM sensors based on appropriate electrochemical techniques can be frequently found in the scientific literature. In this work, we present the first example of a DFO-SAM sensor based on SPR in an optical fiber. The SPR sensing platform was realized by removing the cladding of a plastic optical fiber along half the circumference, spin coating a buffer of Microposit S1813 photoresist on the exposed core, and finally sputtering a thin gold film. The hydroxamate siderophore deferoxamine (DFO), having high binding affinity for Fe(III), is then used in its immobilized form, as self-assembled monolayer on the gold layer surface of the POF sensor. The results showed that the DFO-SAM-POF-sensor was able to sense the formation of the Fe(III)/DFO complex in the range of concentrations between 1 μm and 50 μm with a linearity range from 0 to 30 μm of Fe(III). The selectivity of the sensor was also proved by interference tests.

T7 bacteriophage induced changes of gold nanoparticle morphology: biopolymer capped gold nanoparticles as versatile probes for sensitive plasmonic biosensors

The morphological changes of gold nanoparticles induced by T7 virus (bacteriophage) and the determination of its femtomolar concentration by a plasmonic method are presented.

A REVERSIBLE OPTICAL SENSOR BASED ON CHITOSAN FILM FOR THE SELECTIVE DETECTION OF COPPER IONS

Heavy metals greatly influence animal physiology, even at small doses. Among these metals, the copper ion is of great concern due to its effects on humans and wide applications in industry. Compared to atomic absorption spectroscopy and inductively coupled plasma-mass spectrometry, which destroy the samples that are analyzed, optical techniques do not decompose the analyte and have become a popular field of recent research. In this paper, we combined a novel optical detector that did not require sample-labeling, called surface plasmon resonance (SPR), with chitosan to detect copper ions by modifying the functional groups of chitosan through pH modification. Compared to other optical detectors, the SPR system was relatively fast and involved fewer experimental confounding factors. The three-dimensional structure of chitosan was used to obtain lower detection limits. Moreover, modification of the chitosan functional groups resulted in efficient regeneration by controlling the pH. A detection limit of 0.1 μM was obtained (linear range: 0.5–10 μM, R2 = 0.976), and the specificity was certified by comparing the copper ion with six other ions. Additionally, we successfully regenerated the SPR chips by modifying the functional groups. In conclusion, the chitosan–SPR system detected copper ions with improved detection limits using a quick and simple regeneration method.

Voltage-controlled metal binding on polyelectrolyte-functionalized nanopores

Most of the research in the field of nanopore-based platforms is focused on monitoring ion currents and forces as individual molecules translocate through the nanopore. Molecular gating, however, can occur when target analytes interact with receptors appended to the nanopore surface. Here we show that a solid state nanopore functionalized with polyelectrolytes can reversibly bind metal ions, resulting in a reversible, real-time signal that is concentration dependent. Functionalization of the sensor is based on electrostatic interactions, requires no covalent bond formation, and can be monitored in real time. Furthermore, we demonstrate how the applied voltage can be employed to tune the binding properties of the sensor. The sensor has wide-ranging applications and, its simplest incarnation can be used to study binding thermodynamics using purely electrical measurements with no need for labeling.

Grading the commercial optical biosensor literature-Class of 2008: 'The Mighty Binders'

Optical biosensor technology continues to be the method of choice for label-free, real-time interaction analysis. But when it comes to improving the quality of the biosensor literature, education should be fundamental. Of the 1413 articles published in 2008, less than 30% would pass the requirements for high-school chemistry. To teach by example, we spotlight 10 papers that illustrate how to implement the technology properly. Then we grade every paper published in 2008 on a scale from A to F and outline what features make a biosensor article fabulous, middling or abysmal. To help improve the quality of published data, we focus on a few experimental, analysis and presentation mistakes that are alarmingly common. With the literature as a guide, we want to ensure that no user is left behind.