Mechanistic study of the atomic layer deposition of cobalt: a combined mass spectrometric and computational approach

Cobaltcarbonyl-tert-butylacetylene (CCTBA) is a conventional precursor for the selective atomic layer deposition of Co onto silicon surfaces. However, a limited understanding of the deposition mechanism of such cobalt precursors curbs rational improvements on their design for increased efficiency and tuneable selectivity. The impact of using a less reactive internal alkyne instead of a terminal alkyne was investigated using experimental and computational methods. Using electrospray-ionization mass spectrometry, the formation of CCTBA analogs and their gas phase decomposition pathways were studied. Decomposition experiments show very similar decomposition pathways between the two complexes. The internal alkyne dissociates from the Co complex at slightly lower energies than the terminal alkyne, suggesting that an internal alkynyl ligand may be more suited to low temperature ALD. In addition, transition state calculations using the nudged elastic band method confirm an increased reaction barrier between the internal alkyne and the Si-H surface bonds on Si(111). These results suggests that using a less reactive internal alkyne will result in fewer embedded carbon impurities during deposition onto Si wafers. DFT calculations using the PBE functional and periodic boundary conditions also predict increased surface binding with the metal centers of the internal alkynyl complex.

A fixed-charge model of the N-protomer of 4-aminobenzoic acid to facilitate the study of the unimolecular and bimolecular chemistry of its "neutral" carboxylic acid group

RATIONALE

There are a growing number of examples of protomers formed via electrospray ionization (ESI) that do not fragment under mobile proton conditions, giving rise to distinct tandem mass spectra. To model the N-protomer of 4-aminobenzoic acid, here we study the gas-phase unimolecular and bimolecular chemistry of the 4-(carboxyphenyl)trimethylammonium ion.

METHODS

4-(Carboxyphenyl)trimethylammonium iodide was synthesized, purified via recrystallization and transferred to the gas phase via ESI. 4-(Carboxyphenyl)trimethylammonium ion, 7, was mass selected and subjected to collision-induced dissociation and ion-molecule reactions in a linear ion trap mass spectrometer.

RESULTS

The major fragmentation channel for the fixed-charge cation 7 is methyl radical loss, whereas loss of trimethylamine and CO2 represents minor pathways. The free carboxylic acid functional group of 7 is unreactive toward a number of neutral reagents (methanol, acetone, acetonitrile, and N,N'-diisopropylcarbodiimide). 7 reacts very slowly with trimethylborate via addition-elimination, consistent with density functional theory (DFT) calculations that show this reaction is slightly endothermic. The deuterated cation 7(D) undergoes slow D/H exchange with ethanol, and DFT calculations reveal that a flip-flop mechanism operates.

CONCLUSIONS

The free carboxylic group of 7 is not very reactive toward neutral reagents in the gas phase.

Free N-heterocyclic carbenes from Brønsted acidic ionic liquids: Direct detection by electrospray ionization mass spectrometry

RATIONALE

The occurrence of N-heterocyclic carbenes in imidazolium-based ionic liquids has long been discussed, but no spectroscopic evidence has been reported yet due to their transient nature. The insertion of an ionizable acid group into the cation scaffold of an ionic liquid which acts as a charge tag allows for the direct detection of free carbenes by mass spectrometry.

METHODS

Three different Brønsted acidic ionic liquids were synthesized: 1-methyl-3-carboxymethylimidazolium chloride (MAICl), 1-methyl-3-carboxymethylimidazolium acetate (MAIAc) and the corresponding 2-(3-methyl-1H-imidazol-3-ium-1-yl)acetate zwitterion (MAI - H). The speciation of these compounds was then analysed by electrospray ionization ion-trap mass spectrometry in the negative ion mode.

RESULTS

The C2-H deprotonation of the imidazolium cation leading to the formation of the corresponding carbene is highly affected by the basic properties of the counter-anion. In the case of MAICl and MAI - H ionic liquids, no charged species corresponding to the free N-heterocyclic carbene was detected. On the contrary, in the presence of a sufficiently basic anion, such as acetate of MAIAc ionic liquid, an intense signal related to the free carbenic species was observed without the addition of an external base.

CONCLUSIONS

In situ formation of free N-heterocyclic carbenes from Brønsted acidic ionic liquids was demonstrated, highlighting the crucial role of anion basicity in promoting the C2-H proton abstraction from imidazolium cations with a carboxylic side chain.

A mechanistic investigation of the Pd-catalyzed cross-coupling between N-tosylhydrazones and aryl halides

The cross-coupling of N-tosylhydrazones and aryl halides forms carbon-carbon bonds, producing 1,1-disubstituted alkenes. Though it has proven extremely useful in several fields of chemistry, its mechanism remains experimentally unexplored. Combining benchtop NMR and real-time mass spectrometry afforded the ability to monitor the catalytic intermediates as well as the rate of product formation.

How and Why to Investigate Multicomponent Reactions Mechanisms? A Critical Review

We review the most innovative efforts and greatest challenges faced when elucidating multicomponent reactions (MCRs) mechanisms. When compared to traditional reactions, the often two or more concurrent reactions pathways and the greater number of possible intermediates in MCRs turn their mechanistic investigation both a harder and trickier task. The common approaches used to investigate reaction mechanisms are often unable to clarify MCRs mechanisms; hence few but clever approaches are currently used to determine these mechanisms and to depict their key transformations. Their complexity has required most innovative approaches and the use of a number of unique techniques that have shed light over the favored pathway selected from the myriad of alternatives theoretically available for MCRs. This review focuses on the most successful efforts applied by a few leading groups to perform these puzzlingly investigations.

Disulfonated xantphos for mass spectrometric mechanistic analysis

Xantphos is a wide bite angle bisphosphine ligand that finds wide application in catalysis. Tracking its behavior during reactions under realistic reaction conditions can be difficult at low concentrations, and although electrospray ionization mass spectrometry (ESI-MS) is effective at real-time monitoring of catalytic reactions, it can only observe ions. Accordingly, we experimented with the dianionic disulfonated version of xantphos as a charged tag for mechanistic analysis. It proved to behave exactly as hoped, providing good intensity and enabled the direct study of both an initial binding event (to copper, very fast) and a subsequent transfer to another metal (palladium). Its dianionic nature makes it especially promising for the study of reactions in which metals change charge state, because a cationic metal complex with an anionic ligand is an invisible zwitterion, whereas a dianionic ligand would instead make the same cationic complex appear due to the overall charge of −1. As such, disulfonated xantphos holds genuine promise as a mechanistic probe in real time analysis using mass spectrometry.

Charge-Tagged N-Heterocyclic Carbenes (NHCs): Revealing the Hidden Side of NHC-Catalysed Reactions through Electrospray Ionization Mass Spectrometry

N-heterocyclic carbenes (NHCs) are key intermediates in a variety of chemical reactions. Owing to their transient nature, the interception and characterization of these reactive species have always been challenging. Similarly, the study of reaction mechanisms in which carbenes act as catalysts is still an active research field. This Minireview describes the contribution of electrospray ionization mass spectrometry (ESI-MS) to the detection of charge-tagged NHCs resulting from the insertion of an ionic group into the molecular scaffold. The use of different mass spectrometric techniques, combined with the charge-tagging strategy, allowed clarification of the involvement of NHCs in archetypal reactions and the study of their intrinsic chemistry.

Homogeneous and heterogeneous molecular catalysts for electrochemical reduction of carbon dioxide

Carbon dioxide (CO2) is a greenhouse gas whose presence in the atmosphere significantly contributes to climate change. Developing sustainable, cost-effective pathways to convert CO2 into higher value chemicals is essential to curb its atmospheric presence. Electrochemical CO2 reduction to value-added chemicals using molecular catalysis currently attracts a lot of attention, since it provides an efficient and promising way to increase CO2 utilization. Introducing amino groups as substituents to molecular catalysts is a promising approach towards improving capture and reduction of CO2. This review explores recently developed state-of-the-art molecular catalysts with a focus on heterogeneous and homogeneous amine molecular catalysts for electroreduction of CO2. The relationship between the structural properties of the molecular catalysts and CO2 electroreduction will be highlighted in this review. We will also discuss recent advances in the heterogeneous field by examining different immobilization techniques and their relation with molecular structure and conductive effects.

Molecular catalysis of CO2 reduction: recent advances and perspectives in electrochemical and light-driven processes with selected Fe, Ni and Co aza macrocyclic and polypyridine complexes

Earth-abundant Fe, Ni, and Co aza macrocyclic and polypyridine complexes have been thoroughly investigated for CO2 electrochemical and visible-light-driven reduction. Since the first reports in the 1970s, an enormous body of work has been accumulated regarding the two-electron two-proton reduction of the gas, along with mechanistic and spectroscopic efforts to rationalize the reactivity and establish guidelines for structure-reactivity relationships. The ability to fine tune the ligand structure and the almost unlimited possibilities of designing new complexes have led to highly selective and efficient catalysts. Recent efforts toward developing hybrid systems upon combining molecular catalysts with conductive or semi-conductive materials have converged to high catalytic performances in water solutions, to the inclusion of these catalysts into CO2 electrolyzers and photo-electrochemical devices, and to the discovery of catalytic pathways beyond two electrons. Combined with the continuous mechanistic efforts and new developments for in situ and in operando spectroscopic studies, molecular catalysis of CO2 reduction remains a highly creative approach.

Gas-phase studies of copper(I)-mediated CO2 extrusion followed by insertion of the heterocumulenes CS2 or phenylisocyanate

The gas-phase extrusion-insertion reactions of the copper complex [bathophenanthroline (Bphen)CuI (O2 CC6 H5 )]2- , generated via electrospray ionization, was studied in a linear ion trap mass spectrometer with the combination of collision-induced dissociation (CID) and ion-molecule reaction (IMR) events. Multistage mass spectrometry (MSn ) experiments and density functional theory (DFT) demonstrated that extrusion of carbon dioxide from [(Bphen)Cu(O2 CC6 H5 )]2- (CID) gives the organometallic intermediate [(Bphen)Cu(C6 H5 )]2- , which subsequently reacts with carbon disulfide (IMR) via insertion to yield [(Bphen)Cu (SC(S)C6 H5 )]2- . The fragmentation of the product ion resulted in the formation of [Bphen]2- , [(Bphen)Cu]- and C6 H5 CS2 - under CID conditions. The formation of the latter two charge separation products thus provides evidence of C-C bond formation in the IMR step. Although analogous studies with isocyanate, which is isoelectronic with CS2 , showed a poor reactivity in the gas phase, the mechanistic understanding obtained from these model studies encourages future development of a solution phase protocol for the synthesis of amides from carboxylic acids and isocyanates mediated by copper(I) complexes.

Photoexcited Pd(ii) auxiliaries enable light-induced control in C(sp3)-H bond functionalisation

Herein we report the photophysical and photochemical properties of palladacycle complexes derived from 8-aminoquinoline ligands, commonly used auxiliaries in C–H activation. Spectroscopic, electrochemical and computational studies reveal that visible light irradiation induces a mixed LLCT/MLCT charge transfer providing access to synthetically relevant Pd(iii)/Pd(iv) redox couples. The Pd(ii) complex undergoes photoinduced electron transfer with alkyl halides generating C(sp³)–H halogenation products rather than C–C bond adducts. Online photochemical ESI-MS analysis implicates participation of a mononuclear Pd(iii) species which promotes C–X bond formation via a distinct Pd(iii)/Pd(iv) pathway. To demonstrate the synthetic utility, we developed a general method for inert C(sp³)–H bond bromination, chlorination and iodination with alkyl halides. This new strategy in auxiliary-directed C–H activation provides predictable and controllable access to distinct reactivity pathways proceeding via Pd(iii)/Pd(iv) redox couples induced by visible light irradiation.

Visible light irradiation of 8-aminoquinoline Pd(ii) complexes initiates photoinduced electron transfer with alkyl halides, affording C–H halogenation over C–C bond adducts. A method for inert C(sp³)–H bond halogenation (Br, Cl and I) is reported.

Step-by-step real time monitoring of a catalytic amination reaction

The multiple reaction monitoring mode of a triple quadrupole mass spectrometer is used to examine the Buchwald-Hartwig amination reaction at 0.1% catalyst loading in real-time using sequential addition of reagents to probe the individual steps in the cycle. This is a powerful new method for probing reactions under realistic conditions.

One macrocyclic ligand, four oxidation states: A 16-atom ringed dianionic tetra-NHC macrocycle and its Cr(II) through Cr(V) complexes

Despite chromium being among the first transition metals ever reported to bind to an NHC, chromium NHC complexes, especially in mid and high oxidation states, have received scant attention. Herein, the synthesis, characterization, and reactivity of a series of Cr(II) to Cr(V) complexes bearing a 16-atom ringed dianionic tetra-NHC macrocycle are reported. The Cr(II) dimer is diamagnetic and displays a very short Cr-Cr quadruple bond, unprecedented for Cr-NHC complexes to date. Oxidative cleavage of the Cr-Cr bond leads to the formation of a highly stable diamagnetic Cr(IV) oxo complex. Similar reactions with organic azides lead to paramagnetic Cr(IV) imide complexes. Notably, the Cr(IV) oxo can be oxidized in a reversible reaction to yield a Cr(V) cationic oxo complex, which is a very rare high oxidation state Cr-NHC-compound. This Cr(V) oxo undergoes stoichiometric oxygen atom transfer. Similar reactions were attempted with molybdenum and tungsten to form macrocyclic NHC complexes, but only a molybdenum dimer could be isolated.

Probing the gas-phase structure of charge-tagged intermediates of a proline catalyzed aldol reaction – vibrational spectroscopy distinguishes oxazolidinone from enamine species

Charge-tagging enables the detection of reaction intermediates which are probed by IRMPD spectroscopy in combination with theory.

Is the formation of N-heterocyclic carbenes (NHCs) a feasible mechanism for the distillation of imidazolium ionic liquids?

We describe the synthesis of two tetrachloroindate ionic liquids used as probes to study the involvement of NHCs (N-heterocyclic carbenes) in the distillation of imidazolium derivatives. Atmospheric-pressure chemical ionization mass spectrometry (APCI-MS), electrospray ionization mass spectrometry (ESI-MS), atmospheric-pressure thermal desorption ion mass spectrometry (APTDI-MS) and laser-induced acoustic desorption (LIAD) were used to depict the possibility of the involvement of NHCs during the distillation process. Each type of imidazolium derivative showed a particular mechanism of distillation, pointing firmly to the dependence of both the cation and the anion natures to distil as ion pairs or NHCs. Ionic liquid 1-n-butyl-3-methylimidazolium tetrachloroindate (1a) exhibited a preference to distil as ion pairs, whereas 3,3'-(ethane-1,2-diyl)bis(1-methyimidazolium)bis-tetrachloroindate (1b) may react with the Lewis acid anion, affording a bidentate NHC complex to distil. Thermodynamics, quantum theory of atoms in molecules (QTAIM) and natural bond orbital (NBO) analyses of the ionic liquid 1a were also conducted and helped understand the preference for ion pairs instead of NHCs. The performed theoretical calculations did not forwent the possibility of NHC formation; however, they clearly indicated the high stability of the anions (Lewis acids in nature) and also indicated that the possible reaction between NHC and the anion is not favoured. The calculated thermodynamic values were in accordance with the features observed by MS and indicated ion pairs as the feasible species for the distillation of imidazolium-based ionic liquids.

Ionization methods for the mass spectrometry of organometallic compounds

The rapid development of new ionization methods has greatly expanded the ability of mass spectrometry to target diverse areas of chemistry. Synthetic organometallic and inorganic chemists often find themselves with interesting characterization problems that mass spectrometry could potentially find the answer for, but without a guide for choosing the appropriate method of analysis. This tutorial review seeks to provide that guidance via a simple flow chart followed by a brief description of how each common ionization method works. It covers all of the commonly used ionization techniques as well as promising variants and aims to be a resource of first resort for organometallic chemists and analysts tackling a new problem.

Mass transfer and convection effects in small-scale catalytic hydrogenation

The reaction rate of rhodium-catalyzed hydrogenation of alkynes was shown to be strongly influenced by the transfer of the hydrogen gas into the solution and stirring in the solution.

Experimental Insight into the Thermodynamics of the Dissolution of Electrolytes in Room-Temperature Ionic Liquids: From the Mass Action Law to the Absolute Standard Chemical Potential of a Proton

Room-temperature ionic liquids (ILs) are a class of nonaqueous solvents that have expanded the realm of modern chemistry, drawing increasing interest over the last few decades, not only in terms of their own unique physical chemistry but also in many applications including organic synthesis, electrochemistry, and biological systems, wherein charged solutes (i.e., electrolytes) often play vital roles. However, our fundamental understanding of the dissolution of an electrolyte in an IL is still rather limited. For example, the activity of a charged species has frequently been assumed to be unity without a clear experimental basis. In this study, we have discussed a standard component-based scheme for the dissolution of an electrolyte in an IL, supported by our observation of ideal Nernstian responses for the reduction of silver and ferrocenium salts in a representative IL, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([emim⁺][NTf₂ ^-] or [emim⁺][TFSI^-]). Using this scheme, which was also supported by temperature-dependent measurements with ILs having longer alkyl chains in the imidazolium ring, and the solubility of the IL in water, we established the concept of Gibbs transfer energies of "pseudo-single ions" from the IL to conventional neutral molecular solvents (water, acetonitrile, and methanol). This concept, which bridges component- and constituent-based energetics, utilizes an extrathermodynamic assumption, which itself was justified by experimental observations. These energies enable us to eliminate inner potential differences between the IL and molecular solvents (solvent-solvent interactions), that is, on a practical level, conditional liquid junction potential differences, so that we can discuss ion-solvent interactions independently. Specifically, we have examined the standard electrode potential of the ferrocenium/ferrocene redox couple, Fc⁺/Fc, and the absolute intrinsic standard chemical potential of a proton in [emim⁺][NTf₂ ^-], finding that the proton is more acidic in the IL than in water by 6.5 ± 0.6 units on the unified pH scale. These results strengthen the progress on the physical chemistry of ions in IL solvent systems on the basis of their activities, providing a rigorous thermodynamic framework.

Synthesis, Structure, and Applications of α-Cationic Phosphines

In α-cationic phosphines, at least one of the three substituents on phosphorus corresponds to a cationic (normally, but not always heteroaromatic) group, which is attached without any spacer to the phosphorus atom by a relatively inert P-C bond. This unique architecture confers to the resulting ligand strong acceptor properties, which frequently surpass those of traditional acceptor ligands such as phosphites or polyfluorinated phosphines. In addition, the fine-tuning of the stereoelectronic properties of α-cationic phosphines is also possible by judicious selection of the number and nature of the cationic groups. The opportunities offered in catalysis by α-cationic ligands arise from this ability to deplete electron density from the metals they coordinate. Thus, if in a hypothetical catalytic cycle the step that determines the rate is facilitated by an increase of the Lewis acidity at the metal center, then an acceleration of the whole process is expected by their use as ancillary ligands. Interestingly, this situation is found more frequently than one might think; many common elementary steps involved in catalytic cycles, such as reductive eliminations, coordination of substrates to metals, or attack of nucleophiles to coordinated substrates, belong to this category and are often fostered by electron poor metal centers. In this regard, our group has observed remarkable ligand acceleration effects by the employment of α-cationic phosphines in Au(I)- and Pt(II)-promoted hydroarylation and cycloisomerization reactions. These results seem to be general in π-acid catalysis when the nucleophile used is not especially electron rich because then their attack to the activated alkene or alkyne is normally rate determining. On the other hand, the use of cationic phosphines also presents drawbacks that limit their range of application. As a general rule, the reduced σ-donation from the phosphine is not compensated by the increased π-back-donation from the metal making the resulting phosphorus-metal bond weaker, and the corresponding catalysts more prone to decomposition. This can be critical when di- or tricationic ancillary ligands are used. In addition, the positively charged groups occasionally participate in undesired side reactions, with either the metal or the substrate, which are not present when their neutral congeners are used. Stimulated by both the fundamental questions regarding bonding and their valuable applications in catalysis, the chemistry of α-cationic phosphines has experienced an enormous growth during the last years. This Account describes our group's efforts and those of others to understand their coordination behavior, study their reactivity, and further develop their range of applications in catalysis.

Copper-catalyzed reactions: Research in the gas phase

Electrospray ionization mass spectrometry (ESI-MS) is becoming an important tool for mechanistic studies in organic and organometallic chemistry. It allows investigation of reaction mixtures including monitoring of reactants, products, and intermediates, studying properties of the intermediates and their reactivity. Studying the reactive species in the gas phase can be advantageously combined with theoretical calculations. This review is focused on ESI-MS studies of copper-catalyzed reactions. Possible effects of the electrospray process on the transfer of the copper complexes to the gas phase are discussed. The plethora of mass spectrometric approaches is demonstrated on copper mediated C-H activations, cross coupling reactions, rearrangements, organocuprate chemistry, and other examples.

Synergistic catalysis within TEMPO-functionalized periodic mesoporous organosilica with bridge imidazolium groups in the aerobic oxidation of alcohols

Anchoring TEMPO within the nanospaces of a PMO with bridged imidazolium groups led to an powerful bifunctional catalyst (TEMPO@PMO-IL-Br), which showed enhanced activity in the metal-free aerobic oxidation of alcohols.

Mechanistic insights from mass spectrometry: examination of the elementary steps of catalytic reactions in the gas phase

Real-time mass spectrometric monitoring of speciation in a catalytic reaction while it is occurring provides powerful insights into mechanistic aspects of the reaction, but cannot be expected to elucidate all details. However, mass spectrometers are not limited just to analysis: they can serve as reaction vessels in their own right, and given their powers of separation and activation in the gas phase, they are also capable of generating and isolating reactive intermediates. We can use these capabilities to help fill in our overall understanding of the catalytic cycle by examining the elementary steps that make it up. This article provides examples of how these simple reactions have been examined in the gas phase.

A new charge-tagged proline-based organocatalyst for mechanistic studies using electrospray mass spectrometry

A new 4-hydroxy-L-proline derivative with a charged 1-ethylpyridinium-4-phenoxy substituent has been synthesized with the aim of facilitating mechanistic studies of proline-catalyzed reactions by ESI mass spectrometry. The charged residue ensures a strongly enhanced ESI response compared to neutral unmodified proline. The connection by a rigid linker fixes the position of the charge tag far away from the catalytic center in order to avoid unwanted interactions. The use of a charged catalyst leads to significantly enhanced ESI signal abundances for every catalyst-derived species which are the ones of highest interest present in a reacting solution. The new charged proline catalyst has been tested in the direct asymmetric inverse aldol reaction between aldehydes and diethyl ketomalonate. Two intermediates in accordance with the List-Houk mechanism for enamine catalysis have been detected and characterized by gas-phase fragmentation. In addition, their temporal evolution has been followed using a microreactor continuous-flow technique.

Charge-tagged ligands: useful tools for immobilising complexes and detecting reaction species during catalysis

A critical overview is presented on the use of charged tagged ligands (CTLs) as immobilising agents in organometallic catalysis and as probes for studying mechanisms through electrospray ionisation mass spectrometry (ESI-MS) based on the most recent literature.

In recent years, charge-tagged ligands (CTLs) have become valuable tools in organometallic catalysis. Insertion of an ionic side chain into the molecular skeleton of a known ligand has become a useful protocol for anchoring ligands, and consequently catalysts, in polar and ionic liquid phases. In addition, the insertion of a cationic moiety into a ligand is a powerful tool that can be used to detect reaction intermediates in organometallic catalysis through electrospray ionisation mass spectrometry (ESI-MS) experiments. The insertion of an ionic tag ensures the charge in the intermediates independently of the ESI-MS. For this reason, these ligands have been used as ionic probes in mechanistic studies for several catalytic reactions. Here, we summarise selected examples on the use of CTLs as immobilising agents in organometallic catalysis and as probes for studying mechanisms through ESI-MS.

α-Cationic phosphines: synthesis and applications

In coordination chemistry, typical ancillary ligands are anionic or neutral species. Cationic ones are exceptions and, when used, the positively charged groups are normally attached to the periphery and not close to the donating atom. However, this concept article highlights a series of recent experimental, as well as theoretical results, suggesting that the utility in catalysis of cationic phosphines with no spacer between the phosphorus atom and the positively charged group(s) has been largely overlooked. In fact, a growing number of studies indicate that, because of their specific architecture, these cationic ligands depict excellent π-acceptor character that can exceed that of phosphites or polyfluorinated phosphines. This property has been used to increase the Lewis acidity of the metals they coordinate. Specifically, new extreme π-acid catalysts, mainly based on Pt(II) and Au(I) , have been recently prepared and their superior performance demonstrated along several mechanistically distinct transformations. In this concept article the current state of the art is critically assessed and possible future directions of the topic discussed.

A detailed kinetic analysis of rhodium-catalyzed alkyne hydrogenation

Continuous monitoring using electrospray ionisation mass spectrometry (ESI-MS) shows that Wilkinson's catalyst hydrogenates a charge-tagged alkyne to the corresponding alkene, and at only a marginally slower rate, to the alkane. No rhodium-containing intermediates were observed during the reaction, consistent with the established mechanism which points at the initial dissociation of triphenylphosphine from Rh(PPh₃)₃Cl as being the key step in the reaction. A numerical model was constructed that the closely matched the experimental data, and correctly predicted the response of the reaction to the addition of excess PPh₃.

Practical approaches to the ESI-MS analysis of catalytic reactions

Electrospray ionization mass spectrometry (ESI-MS) is a soft ionization technique commonly coupled with liquid or gas chromatography for the identification of compounds in a one-time view of a mixture (for example, the resulting mixture generated by a synthesis). Over the past decade, Scott McIndoe and his research group at the University of Victoria have developed various methodologies to enhance the ability of ESI-MS to continuously monitor catalytic reactions as they proceed. The power, sensitivity and large dynamic range of ESI-MS have allowed for the refinement of several homogenous catalytic mechanisms and could potentially be applied to a wide range of reactions (catalytic or otherwise) for the determination of their mechanistic pathways. In this special feature article, some of the key challenges encountered and the adaptations employed to counter them are briefly reviewed.