Ionic liquids as amphiphile self-assembly media

Thermal Stability of Protic Ionic Liquids

While protic ionic liquids (ILs) have found great success as solvents for a broad range of applications, little is known about their degradation when exposed to temperatures above ambient for extended periods of time. Here, we report the thermal stability of six protic ILs, namely, ethylammonium nitrate, ethylammonium formate, ethylammonium acetate, ethanolammonium nitrate, ethanolammonium formate, and ethanolammonium acetate. The effect of heating each ionic liquid to 60 °C for 1 h or 1 week (sealed or open to the atmosphere) was evaluated by considering the changes to water content, pH, mass, thermal phase transitions, and molecular structure after each treatment. Heating each of the six ILs when sealed led to measurable shifts in their water content and 10 wt % pH, but there was no significant change in their mass, thermal phase transitions according to differential scanning calorimetry (DSC), or molecular structure using proton nuclear magnetic resonance (1H NMR) spectra, indicating that the samples were largely unchanged. The samples that were heated open to the atmosphere also displayed no significant changes after 1 h but displayed significant changes after 1 week.

Anion Architecture Controls Structure and Electroresponsivity of Anhalogenous Ionic Liquids in a Sustainable Fluid

Three nonhalogenated ionic liquids (ILs) dissolved in 2-ethylhexyl laurate (2-EHL), a biodegradable oil, are investigated in terms of their bulk and electro-interfacial nanoscale structures using small-angle neutron scattering (SANS) and neutron reflectivity (NR). The ILs share the same trihexyl(tetradecyl)phosphonium ([P6,6,6,14]+) cation paired with different anions, bis(mandelato)borate ([BMB]-), bis(oxalato)borate ([BOB]-), and bis(salicylato)borate ([BScB]-). SANS shows a high aspect ratio tubular self-assembly structure characterized by an IL core of alternating cations and anions with a 2-EHL-rich shell or corona in the bulk, the geometry of which depends upon the anion structure and concentration. NR also reveals a solvent-rich interfacial corona layer. Their electro-responsive behavior, pertaining to the structuring and composition of the interfacial layers, is also influenced by the anion identity. [P6,6,6,14][BOB] exhibits distinct electroresponsiveness to applied potentials, suggesting an ion exchange behavior from cation-dominated to anion-rich. Conversely, [P6,6,6,14][BMB] and [P6,6,6,14][BScB] demonstrate minimal electroresponses across all studied potentials, related to their different dissociative and diffusive behavior. A mixed system is dominated by the least soluble IL but exhibits an increase in disorder. This work reveals the subtlety of anion architecture in tuning bulk and electro-interfacial properties, offering valuable molecular insights for deploying nonhalogenated ILs as additives in biodegradable lubricants and supercapacitors.

Are nature's strategies the solutions to the rational design of low-melting, lipophilic ionic liquids?

Ionic liquids (ILs) have emerged as a new class of materials, displaying a unique capability to self-assemble into micelles, liposomes, liquid crystals, and microemulsions. Despite evident interest, advancements in the controlled formation of amphiphilic ILs remain in the early stages. Taking inspiration from nature, we introduced the concept of lipid-like (or lipid-inspired) ILs more than a decade ago, aiming to create very low-melting, highly lipophilic ILs that are potentially bio-innocuous - a combination of attributes that is frequently antithetical but highly desirable from several application-specific standpoints. Lipid-like ILs are a subclass of functional organic liquid salts that include a range of lipidic side chains such as saturated, unsaturated, linear, branched, and thioether while retaining melting points below room temperature. It was observed in several homologous series of [Cnmim] ILs that elongation of N-appended alkyl chains to greater than seven carbons leads to a substantial increase in melting point (Tm) - which is the most characteristic feature of ILs. Accordingly, it is challenging to develop ILs with low Tm values while preserving their hydrophobicity and self-organizing properties. We found that two alternative Tm depressive approaches are useful. One of these is the replacement of the double bonds with thioether moieties in the alkyl chains, as detailed in several published papers detailing the chemistry of these ILs. Employing thiol-ene and thiol-yne click reactions is a facile, robust, and orthogonal method to overcome the challenges associated with the synthesis of alkyl thioether-functionalized ILs. The second approach involves replacing the double bonds with the cisoid cyclopropyl motif, mimicking the strategy used by certain organisms to modulate cell membrane fluidity. This discovery has the potential to greatly impact the utilization of lipid-like ILs in various applications, including gene delivery, lubricants, heat transfer fluids, and haloalkane separations, among others. This feature article presents a concise, historical overview, highlighting key findings from our work while offering speculation about the future trajectory of this de novo class of soft organic-ion materials.

Stable diesel microemulsion using diammonium ionic liquids and their effects on fuel properties, particle size characteristics and combustion calculations

Ecofriendly and stable Fuel Microemulsions based on renewable components were prepared through solubilizing ethanol in diesel and waste cooking oil blend (4:1). New diquaternary ammonium ionic liquids (3a & 3b) were synthesized through a quaternization reaction of the synthesized dihaloester with diethyl ethanolamine tridecantrioate and triethyl amine tridecantrioate, respectively. The chemical structures were elucidated by NMR spectroscopy. It was observed from DLS analyses that the ethanol particles in all samples have sizes between 4.77 to 11.22 nm. The distribution becomes narrower with the decrease in the ionic liquid concentrations. The fuel properties fall within the ASTM D975 acceptable specifications and are close to the neat diesel properties. The Cetane index were 53 and 53.5, heating values were 38.5 and 38.5 MJ/kg, viscosities were 2.91 and 2.98 mm2/s, densities were 8.26 and 8.29 g/mL and flash points were 49 °C and 48 °C for 3a1 and 3b1 microemulsions, respectively. The particle sizes of samples were examined by DLS for 160 days and they were significantly stable. The amount of ethanol solubilized increases with the increase in the amount of the synthesized ionic liquids and cosurfactant. The combustion calculations pointed out that the microemulsions 3a1 and 3b1 need 13.07 kg air/kg fuel and 12.79 kg air/kg fuel, respectively, which are less than the air required to combust the pure diesel. According to theoretical combustion, using ionic liquids saves the air consumption required for combustion and reduces the quantities of combustion products. The prepared microemulsions were successfully used as a diesel substitute due to their improved combustion properties than pure diesel and low pollution levels.

Green solvent systems for material syntheses and chemical reactions

It is of great significance to develop environmentally benign, non-volatile and recyclable green solvents for different applications. This feature article overviews the properties of green solvent systems (e.g., ionic liquids, supercritical carbon dioxide, deep eutectic solvents and mixed green solvent systems) and their applications in (1) framework material syntheses, including metal-organic frameworks, covalent organic frameworks and hydrogen-bonded organic frameworks, and (2) CO2 conversion reactions, including photocatalytic and electrocatalytic reduction reactions. Finally, the future perspective for research on green solvent systems is proposed from different aspects.

Regulating the structural polymorphism and protein corona composition of phytantriol-based lipid nanoparticles using choline ionic liquids

Lipid-based lyotropic liquid crystalline nanoparticles (LCNPs) face stability challenges in biological fluids during clinical translation. Ionic Liquids (ILs) have emerged as effective solvent additives for tuning the structure of LCNP's and enhancing their stability. We investigated the effect of a library of 21 choline-based biocompatible ILs with 9 amino acid anions as well as 10 other organic/inorganic anions during the preparation of phytantriol (PHY)-based LCNPs, followed by incubation in human serum and serum proteins. Small angle X-ray scattering (SAXS) results show that the phase behaviour of the LCNPs depends on the IL concentration and anion structure. Incubation with human serum led to a phase transition from the inverse bicontinuous cubic (Q2) to the inverse hexagonal (H2) mesophase, influenced by the specific IL present. Liquid chromatography-mass spectrometry (LC-MS) and proteomics analysis of selected samples, including PHY control and those with choline glutamate, choline hexanoate, and choline geranate, identified abundant proteins in the protein corona, including albumin, apolipoproteins, and serotransferrin. The composition of the protein corona varied among samples, shedding light on the intricate interplay between ILs, internal structure and surface chemistry of LCNPs, and biological fluids.

Effects of Ionic Liquids on the Cylindrical Self-Assemblies Formed by Poly(ethylene oxide)-Poly(propylene oxide)-Poly(ethylene oxide) Block Copolymers in Water

Aiming at the fundamental understanding of solvent effects in amphiphilic polymer systems, we considered poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers in water mixed with an ionic liquid-ethylammonium nitrate (EAN), 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6), or 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4)-and we investigated the hexagonal lyotropic liquid crystal structures by means of small-angle X-ray scattering (SAXS). At 50% polymer, the hexagonal structure (cylinders of self-assembled block copolymer) was maintained across the solvent mixing ratio. The effects of the ionic liquids were reflected in the characteristic length scales of the hexagonal structure and were interpreted in terms of the location of the ionic liquid in the self-assembled block copolymer domains. The protic ionic liquid EAN was evenly distributed within the aqueous domains and showed no affinity for the interface, whereas BMIMPF6 preferred to swell PEO and was located at the interface so as to reduce contact with water. BMIMBF4 was also interfacially active, but to a lesser extent.

Aggregation Behavior of Ethoxylated Phytosterol Surfactants in Different Protic Solvents: An Insight from Dielectric Relaxation Studies

The micellar aggregation behavior of biocompatible surfactants, phytosterol ethoxylates (BPS-n, n is the oxyethylene (EO) chain length), containing polyoxyethylene chains in four organic solvents (glycerol (G), ethylene glycol (EG), formamide (FA), and N,N-dimethylformamide (DMF)) was studied by dielectric spectroscopy in the frequency range of 40 Hz to 110 MHz. Only the BPS-n/EG and BPS-n/G systems show distinct dielectric loss peaks near 104 Hz, indicating that BPS-n forms micellar aggregates in EG and G solvents, and the interfacial polarization (IP) between the aggregates and solvents leads to this relaxation. The dielectric spectra were analyzed based on the IP theory and a columnar dispersion model. The dielectric parameters of micelles, the permittivity and conductivity of micelles and solvents, and the volume fraction of the aggregates in solvents were calculated. On this basis, the binding numbers of each EO group on the hydrophobic chain to the solvent molecules EG and G were calculated to be 0.42 and 0.22, respectively. It was suggested that the aggregation appears to be related to the magnitude of the hydrogen bonding interactions. The lower number of EO group-binding solvents is because of the strong steric effect of alcohol solvents and the magnitude of the hydrogen bonding force.

Lyotropic liquid crystal phases of monoolein in protic ionic liquids

Monoolein-based liquid crystal phases are established media that are researched for various biological applications, including drug delivery. While water is the most common solvent for self-assembly, some ionic liquids (ILs) can support lipidic self-assembly. However, currently, there is limited knowledge of IL-lipid phase behavior in ILs. In this study, the lyotropic liquid crystal phase behavior of monoolein was investigated in six protic ILs known to support amphiphile self-assembly, namely ethylammonium nitrate, ethanolammonium nitrate, ethylammonium formate, ethanolammonium formate, ethylammonium acetate, and ethanolammonium acetate. These ILs were selected to identify specific ion effects on monoolein self-assembly, specifically increasing the alkyl chain length of the cation or anion, the presence of a hydroxyl group in the cation, and varying the anion. The lyotropic liquid crystal phases with 20-80 wt. % of monoolein were characterized over a temperature range from 25 to 65 °C using synchrotron small angle x-ray scattering and cross-polarized optical microscopy. These results were used to construct partial phase diagrams of monoolein in each of the six protic ILs, with inverse hexagonal, bicontinuous cubic, and lamellar phases observed. Protic ILs containing the ethylammonium cation led to monoolein forming lamellar and bicontinuous cubic phases, while those containing the ethanolammonium cation formed inverse hexagonal and bicontinuous cubic phases. Protic ILs containing formate and acetate anions favored bicontinuous cubic phases across a broader range of protic IL concentrations than those containing the nitrate anion.

Phase Behavior and Structure of Poloxamer Block Copolymers in Protic and Aprotic Ionic Liquids

Ionic liquids are promising media for self-assembling block copolymers in applications such as energy storage. A robust design of block copolymer formulations in ionic liquids requires fundamental knowledge of their self-organization at the nanoscale. To this end, here, we focus on modeling two-component systems comprising a Poly(ethylene oxide)-poly (propylene oxide)-Poly(ethylene oxide) (PEO-PPO-PEO) block copolymer (Pluronic P105: EO37PO58EO37) and room temperature ionic liquids (RTILs): protic ethylammonium nitrate (EAN), aprotic ionic liquids (1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6), or 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4). Rich structural polymorphism was exhibited, including phases of micellar (sphere) cubic, hexagonal (cylinder), bicontinuous cubic, and lamellar (bilayer) lyotropic liquid crystalline (LLC) ordered structures in addition to solution regions. The characteristic scales of the structural lengths were obtained using small-angle X-ray scattering (SAXS) data analysis. On the basis of phase behavior and structure, the effects of the ionic liquid solvent on block copolymer organization were assessed and contrasted to those of molecular solvents, such as water and formamide.

Water Induced Alterations in Self-Assembly of a Bio-Surfactant in Deep Eutectic Solvent for Enhanced Enzyme Activity

Deep eutectic solvents (DESs) meet important requirements for green solvent technology, including non-toxicity, biodegradability, sustainability, and affordability. Despite possessing low cohesive energy density than water, DESs have been found to support the self-assembly of amphiphiles. It is very much pertinent to examine the effect of water on self-assembly of surfactants in DESs as the presence of water alters the inherent structure of DES, which is expected to affect the characteristic properties of self-assembly. Following this, we have investigated the self-assembly of amino-acid based surfactant, Sodium N-lauroyl sarcosinate (SLS), in DES-water mixtures (10, 30 and 50 w/w% of water) and explored the catalytic activity of Cytochrome-c (Cyt-c) in the formed colloidal systems. Investigations using surface tension, fluorescence, dynamic light scattering (DLS), and isothermal titration calorimetry (ITC) have shown that DES-water mixtures promote the aggregation of SLS, resulting in the lower critical aggregation concentration (cac ∼1.5-6-fold) of the surfactant as compared to water. The nanoclustering of DES at low water content and it's complete de-structuring at high water content affects the self-assembly in a contrasting manner governed by different set of interactions. Further, Cyt-c dispersed in DES-water colloidal solutions demonstrated 5-fold higher peroxidase activity than that observed in phosphate buffer.

Adaptive Ion-Gel: Stimuli-Responsive, and Self-Healing Ion Gels

Ion gels are an emerging class of polymer gels in which a three-dimensional polymer network swells with an ionic liquid. Ion gels have drawn considerable attention in various fields such as energy and biotechnology owing to their excellent properties including nonvolatility, nonflammability, high ionic conductivity, and high thermal and electrochemical stability. Since the first report on ion gels (published ∼30 years ago), diverse functional ion gels exhibiting impressive physicochemical properties have been reported. In this review, recent developments in functional ion gels that can modulate their physical properties in response to environmental conditions are outlined. Stimuli-responsive ion gels that can adaptively undergo phase transitions in response to thermal and light stimuli are initially discussed, followed by an evaluation of diverse self-healing ion gels that can spontaneously mend mechanical damage through judiciously designed ion-gel networks.

A high-absorbance water-soluble photoinitiator nanoparticle for hydrogel 3D printing: synthesis, characterization and in vitro cytotoxicity study

Light-based hydrogel crosslinking is a new approach in rapid and high-resolution 3D printing; however, using this method in tissue engineering is challenging due to the toxicity of photoinitiators, their solvents, and their low efficiency. Herein, a novel, water-soluble photoinitiator with high efficiency in light-based 3D printing is introduced. Low-cost photoinitator, 2,4,6-trimethylbenzoylphenyl phosphinate, is converted into nanoparticles via a microemulsion method and dispersed in water. Cell toxicity assays were performed to prove that these nanoparticles are non-toxic and can be used in biomedical applications. Finally, the nanoparticles were utilized in the high-accuracy 3D printing of hydrogels. The results of this study indicate that these particles are potent to be used in bioprinting.

How Does Nanostructure in Ionic Liquids and Hybrid Solvents Affect Surfactant Self-Assembly?

Ionic liquids (ILs) have recently emerged as novel classes of solvents that support surfactant self-assembly into micelles, liquid crystals, and microemulsions. Their low volatility and wide liquid stability ranges make them attractive for many diverse applications, especially in extreme environments. However, the number of possible ion combinations makes systematic investigations both challenging and rare; this is further amplified when mixtures are considered, whether with water or other H-bonding components such as those found in deep eutectics. In this Perspective we examine what factors determine amphiphilicity, solvophobicity and solvophilicity, in ILs and related exotic environments, in what ways these differ from water, and how the underlying nanostructure of the liquid itself affects the formation and structure of micelles and other self-assembled materials.

Role and Recent Advancements of Ionic Liquids in Drug Delivery Systems

Advancements in the fields of ionic liquids (ILs) broaden its applications not only in traditional use but also in different pharmaceutical and biomedical fields. Ionic liquids "Solutions for Your Success" have received a lot of interest from scientists due to a myriad of applications in the pharmaceutical industry for drug delivery systems as well as targeting different diseases. Solubility is a critical physicochemical property that determines the drug's fate at the target site. Many promising drug candidates fail in various phases of drug research due to poor solubility. In this context, ionic liquids are regarded as effective drug delivery systems for poorly soluble medicines. ILs are also able to combine different anions/cations with other cations/anions to produce salts that satisfy the concept behind the ILs. The important characteristics of ionic liquids are the modularity of their physicochemical properties depending on the application. The review highlights the recent advancement and further applications of ionic liquids to deliver drugs in the pharmaceutical and biomedical fields.

Automation of liquid crystal phase analysis for SAXS, including the rapid production of novel phase diagrams for SDS-water-PIL systems

Lyotropic liquid crystal phases (LCPs) are widely studied for diverse applications, including protein crystallization and drug delivery. The structure and properties of LCPs vary widely depending on the composition, concentration, temperature, pH, and pressure. High-throughput structural characterization approaches, such as small-angle x-ray scattering (SAXS), are important to cover meaningfully large compositional spaces. However, high-throughput LCP phase analysis for SAXS data is currently lacking, particularly for patterns of multiphase mixtures. In this paper, we develop semi-automated software for high throughput LCP phase identification from SAXS data. We validate the accuracy and time-savings of this software on a total of 668 SAXS patterns for the LCPs of the amphiphile hexadecyltrimethylammonium bromide (CTAB) in 53 acidic or basic ionic liquid derived solvents, within a temperature range of 25-75 °C. The solvents were derived from stoichiometric ethylammonium nitrate (EAN) or ethanolammonium nitrate (EtAN) by adding water to vary the ionicity, and adding precursor ions of ethylamine, ethanolamine, and nitric acid to vary the pH. The thermal stability ranges and lattice parameters for CTAB-based LCPs obtained from the semi-automated analysis showed equivalent accuracy to manual analysis, the results of which were previously published. A time comparison of 40 CTAB systems demonstrated that the automated phase identification procedure was more than 20 times faster than manual analysis. Moreover, the high throughput identification procedure was also applied to 300 unpublished scattering patterns of sodium dodecyl-sulfate in the same EAN and EtAN based solvents in this study, to construct phase diagrams that exhibit phase transitions from micellar, to hexagonal, cubic, and lamellar LCPs. The accuracy and significantly low analysis time of the high throughput identification procedure validates a new, rapid, unrestricted analytical method for the determination of LCPs.

Using Nanoscopic Solvent Defects for the Spatial and Temporal Manipulation of Single Assemblies of Molecules

Here we report the use of defects in ordered solvents to form, manipulate, and characterize individual molecular assemblies of either small-molecule amphiphiles or polymers. The approach exploits nanoscopic control of the structure of nematic solvents (achieved by the introduction of topological defects) to trigger the formation of molecular assemblies and the subsequent manipulation of defects using electric fields. We show that molecular assemblies formed in solvent defects slow defect motion in the presence of an electric field and that time-of-flight measurements correlate with assembly size, suggesting methods for the characterization of single assemblies of molecules. Solvent defects are also used to transport single assemblies of molecules between solvent locations that differ in composition, enabling the assembly and disassembly of molecular "nanocontainers". Overall, our results provide new methods for studying molecular self-assembly at the single-assembly level and new principles for integrated nanoscale chemical systems that use solvent defects to transport and position molecular cargo.

Molecular simulations explain the exceptional thermal stability, solvent tolerance and solubility of protein-polymer surfactant bioconjugates in ionic liquids

Proteins complexed electrostatically with polymer surfactants constitute a viscous liquid by themselves, called the solvent-free protein liquid (SFPL). A solution of SFPL in a room temperature ionic liquid (PS-IL) offers the protein hyperthermal stability, higher solubility and greater IL tolerance. A generic understanding of these protein-polymer systems is obtained herein through extensive atomistic molecular dynamics simulations of three different enzymes (lipase A, lysozyme and myoglobin) under various conditions. Along with increased intra-protein hydrogen bonding, the surfactant coating around the proteins imparts greater thermal stability, and also aids in screening protein-IL interactions, endowing them IL tolerance. The reduced surface polarity of the protein-polymer bioconjugate and hydrogen bonding between the ethylene glycol groups of the surfactant and the IL cation contribute to the facile solvation of the protein in its PS-IL form. The results presented here rationalize several experimental observations and will aid in the improved design of such hybrid materials for sustainable catalysis.

Emulsion Polymerization Using an Amphiphilic Oligoether Ionic Liquid as a Surfactant

We investigate the use of an ionic liquid (IL) as a surfactant in emulsion polymerization (EP) reactions. ILs have been proposed as surfactants for micellar dispersions, emulsions, micro-emulsions and suspensions. Thus, it is important to acquire knowledge of the application of ILs in heterogeneous polymerizations. We selected the amphiphile cationic oligoether IoLiLyte C1EG™ as an IL for this purpose and compared its performance to that of the conventional surfactant dodecyl trimethyl ammonium bromide (DTAB) in the EP of methyl methacrylate and styrene. After we found the proper concentration range of the IL, this amphiphile showed similar polymerization rates to those observed with DTAB for both monomers. The evolution of monomer conversion and the final average diameter of formed polymeric particles were similar for both evaluated surfactants, demonstrating their capability to stabilize the EPs of the investigated monomers. We simulated the evolution of monomer conversion and particle size using a conventional model for emulsion polymerization, which showed good agreement with the experimental data, suggesting that the EP with this IL follows Smith-Ewart kinetics.

Lipid Membrane Flexibility in Protic Ionic Liquids

Here, we determine by neutron spin echo spectrometry (NSE) how the flexibility of egg lecithin vesicles depends on solvent composition in two protic ionic liquids (PILs) and their aqueous mixtures. In combination with small-angle neutron scattering (SANS), dynamic light scattering (DLS), and fluorescent probe microscopy, we show that the bending modulus is up to an order of magnitude lower than in water but with no change in bilayer thickness or nonpolar chain composition. This effect is attributed to the dynamic association and exchange of the IL cation between the membrane and bulk liquid, which has the same origin as the underlying amphiphilic nanostructure of the IL solvent itself. This provides a new mechanism by which to tune and control lipid membrane behavior.

Ionic liquid-hydroxide-mediated low-temperature synthesis of high-entropy perovskite oxide nanoparticles

High-entropy perovskite oxides (HEPOs) are attracting significant attention due to their unique structures, unprecedented properties and great application potential in many fields, while available synthetic methods have many shortcomings; so it is still a challenge to develop a simple, low-cost and environment-friendly synthetic strategy for HEPOs. Herein, a novel synthetic strategy is reported for HEPOs using an ionic liquid (IL)-hydroxide-mediated technique at a low temperature and normal atmospheric pressure. The synthesized HEPOs, including Ba(FeNbTiZrTa)O₃, Ba(MnNbTiZrTa)O₃, Ba(FeSnTiZrTa)O₃ and Ba(FeVTiZrTa)O₃, exhibit a cubic structure and a dispersed nanoparticle morphology (particle size of 20-60 nm). The formation process of HEPOs in an IL-KOH system can be described as follows: first, B-site metal source compounds are dissolved in IL-KOH medium to form hydroxyl complexes; second, the complexes further dehydrate, condensate and react with Ba²⁺ ions to form the crystal nuclei of HEPOs under the synergistic effect of reaction temperature and basicity; third, the growth of HEPO nuclei is completed by the Ostwald ripening process. In these processes, KOH not only plays a role as a solvent, but also provides sufficient OH^- concentration for the formation and condensation of B-site metal hydroxyl complexes, while the IL also makes significant contributions: first, a lower reaction temperature and lower dosage of KOH are achieved by the use of the IL; second, the IL with good dissolving ability and low surface tensions can promote the nucleation rate of HEPOs and improve the Ostwald ripening process; third, the compact adsorption of the IL on the surface of products ensures a small particle size and high dispersion of HEPO nanoparticles to a certain extent. In brief, the technique provides an innovative, low-cost, simple and nontoxic strategy for the synthesis of HEPOs, which can be extended to other high-entropy materials.

Recent advances in versatile inverse lyotropic liquid crystals

Owing to the rapid and significant progress in advanced materials and life sciences, nanotechnology is increasingly gaining in popularity. Among numerous bio-mimicking carriers, inverse lyotropic liquid crystals are known for their unique properties. These carriers make accommodation of molecules with varied characteristics achievable due to their complicated topologies. Besides, versatile symmetries of inverse LCNPs (lyotropic crystalline nanoparticles) and their aggregating bulk phases allow them to be applied in a wide range of fields including drug delivery, food, cosmetics, material sciences etc. In this review, in-depth summary, discussion and outlook for inverse lyotropic liquid crystals are provided.

Electrochemical Stability of Zinc and Copper Surfaces in Protic Ionic Liquids

Ionic liquids are versatile solvents that can be tailored through modification of the cation and anion species. Relatively little is known about the corrosive properties of protic ionic liquids. In this study, we have explored the corrosion of both zinc and copper within a series of protic ionic liquids consisting of alkylammonium or alkanolammonium cations paired with nitrate or carboxylate anions along with three aprotic imidazolium ionic liquids for comparison. Electrochemical studies revealed that the presence of either carboxylate anions or alkanolammonium cations tend to induce a cathodic shift in the corrosion potential. The effect in copper was similar in magnitude for both cations and anions, while the anion effect was slightly more pronounced than that of the cation in the case of zinc. For copper, the presence of carboxylate anions or alkanolammonium cations led to a notable decrease in corrosion current, whereas an increase was typically observed for zinc. The ionic liquid-metal surface interactions were further explored for select protic ionic liquids on copper using X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) to characterize the interface. From these studies, the oxide species formed on the surface were identified, and copper speciation at the surface linked to ionic liquid and potential dependent surface passivation. Density functional theory and ab initio molecular dynamics simulations revealed that the ethanolammonium cation was more strongly bound to the copper surface than the ethylammonium counterpart. In addition, the nitrate anion was more tightly bound than the formate anion. These likely lead to competing effects on the process of corrosion: the tightly bound cations act as a source of passivation, whereas the tightly bound anions facilitate the electrodissolution of the copper.

Protein aggregation and crystallization with ionic liquids: Insights into the influence of solvent properties

Ionic liquids (ILs) have been used in solvents for proteins in many applications, including biotechnology, pharmaceutics, and medicine due to their tunable physicochemical and biological properties. Protein aggregation is often undesirable, and predominantly occurs during bioprocesses, while the aggregation process can be reversible or irreversible and the aggregates formed can be native/non-native and soluble/insoluble. Recent studies have clearly identified key properties of ILs and IL-water mixtures related to protein performance, suggesting the use of the tailorable properties of ILs to inhibit protein aggregation, to promote protein crystallization, and to control protein aggregation pathways. This review discusses the critical properties of IL and IL-water mixtures and presents the latest understanding of the protein aggregation pathways and the development of IL systems that affect or control the protein aggregation process. Through this feature article, we hope to inspire further advances in understanding and new approaches to controlling protein behavior to optimize bioprocesses.

Exploring the Interactions of Ionic Liquids with Bio-Organic Amphiphiles Using Computational Approaches

Bio-organic amphiphiles have been shown to effectively impart unique physicochemical properties to ionic liquids resulting in the formation of versatile hybrid composites. In this work, we utilized computational methods to probe the formation and properties of hybrids prepared by mixing three newly designed bio-organic amphiphiles with 14 ionic liquids containing cholinium or glycine betaine cations and a variety of anions. The three amphiphiles were designed such that they contain unique biological moieties found in nature by conjugating (a) malic acid with the amino acid glutamine, (b) thiomalic acid with the antiviral, antibacterial pyrazole compound [3-(3,5-dimethyl-1H-pyrazol-1-yl)benzyl]amine, and (c) Fmoc-protected valine with diphenyl amine. Conductor-like screening model for real solvents (COSMO-RS) was used to obtain sigma profiles of the hybrid mixtures and to predict viscosities and mixing enthalpies of each composite. These results were used to determine optimal ionic liquid-bio-organic amphiphile mixtures. Molecular dynamics simulations of three optimal hybrids were then performed, and the interactions involved in the formation of the hybrids were analyzed. Our results indicated that cholinium-based ILs interacted most favorably with the amphiphiles through a variety of inter- and intramolecular interactions. This work serves to illustrate important factors that influence the interactions between bio-organic amphiphiles and bio-ILs and aids in the development of novel ionic liquid-based composites for a wide variety of potential biological applications.

Fundamentals and Design-Led Synthesis of Emulsion-Templated Porous Materials for Environmental Applications

Emulsion templating is at the forefront of producing a wide array of porous materials that offers interconnected porous structure, easy permeability, homogeneous flow-through, high diffusion rates, convective mass transfer, and direct accessibility to interact with atoms/ions/molecules throughout the exterior and interior of the bulk. These interesting features together with easily available ingredients, facile preparation methods, flexible pore-size tuning protocols, controlled surface modification strategies, good physicochemical and dimensional stability, lightweight, convenient processing and subsequent recovery, superior pollutants remediation/monitoring performance, and decent recyclability underscore the benchmark potential of the emulsion-templated porous materials in large-scale practical environmental applications. To this end, many research breakthroughs in emulsion templating technique witnessed by the recent achievements have been widely unfolded and currently being extensively explored to address many of the environmental challenges. Taking into account the burgeoning progress of the emulsion-templated porous materials in the environmental field, this review article provides a conceptual overview of emulsions and emulsion templating technique, sums up the general procedures to design and fabricate many state-of-the-art emulsion-templated porous materials, and presents a critical overview of their marked momentum in adsorption, separation, disinfection, catalysis/degradation, capture, and sensing of the inorganic, organic and biological contaminants in water and air.

Synthesis and characterization of chemically fueled supramolecular materials driven by carbodiimide-based fuels

Many supramolecular materials in biological systems are driven to a nonequilibrium state by the irreversible consumption of high-energy molecules such as ATP or GTP. As a result, they exhibit unique dynamic properties such as a tunable lifetime, adaptivity or the ability to self-heal. In contrast, synthetic counterparts that exist in or close to equilibrium are controlled by thermodynamic parameters and therefore lack these dynamic properties. To mimic biological materials more closely, synthetic self-assembling systems have been developed that are driven out of equilibrium by chemical reactions. This protocol describes the synthesis and characterization of such an assembly, which is driven by carbodiimide fuels. Depending on the amount of chemical fuel added to the material, its lifetime can be tuned. In the first step, the protocol details the synthesis and purification of the peptide-based precursors for the fuel-driven assemblies by solid-phase peptide synthesis. Then, we explain how to analyze the kinetic response of the precursors to a carbodiimide-based chemical fuel by HPLC and kinetic models. Finally, we detail how to study the emerging assembly's macro- and microscopic properties by time-lapse photography, UV-visible spectroscopy, shear rheology, confocal laser scanning microscopy and electron microscopy. The procedure is described using the example of a colloid-forming precursor Fmoc-E-OH and a fiber-forming precursor Fmoc-AAD-OH to emphasize the differences in characterization depending on the type of assembly. The characterization of a precursor's transient assembly can be done within 5 d. The synthesis and purification of a peptide precursor requires 2 d of work.

Fracto-eutectogels: SDS fractal dendrites via counterion condensation in a deep eutectic solvent

Glyceline, a deep eutectic solvent comprising glycerol and choline chloride, is a green nonaqueous solvent with potential industrial applications. Molecular mechanisms of surfactant self-assembly in deep eutectic solvents are expected to differ from those in their constituent polar components and are not well understood. Here we report the observation of self-assembled SDS fractal dendrites with dimensions up to ∼mm in glyceline at SDS concentrations as low as cSDS ∼ 0.1 wt%. The prevalence of these dendritic fractal aggregates led to the formation of a gel phase at SDS concentrations above ≥1.9 wt% (the critical gelation concentration cCGC). The gel microscopic structure was visualised using polarised light microscopy (PLM); rheology measurements confirmed the formation of a colloidal gel, where the first normal stress difference was negative and the elastic modulus was dominant. Detailed nano-structural characterisation by small-angle neutron scattering (SANS) further confirmed the presence of fractal aggregates. Such SDS aggregation or gelation has not been observed in water at such low surfactant concentrations, whereas SDS has been reported to form lamellar aggregates in glycerol (a component of glyceline). We attribute the formation of the SDS fractal dendrites to the condensation of counterions (i.e. the choline ions) around the SDS aggregates - a diffusion-controlled process, leading to the aggregate morphology observed. These unprecedented results shed light on the molecular mechanisms of surfactant self-assembly in deep eutectic solvents, important to their application in industrial formulation.

Self-assembly of an imidazolium surfactant in aprotic ionic liquids. 2. More than solvents

As tailorable solvents, the physiochemical properties of ionic liquids can be tuned by the structure of ions. Herein, we investigate the structural effects of ILs on the self-assembly of surfactants. It has been confirmed that the cationic surfactant 1-hexadecyl-3-methylimidazolium bromide (C₁₆mimBr) can self-assemble into micellar and lamellar lyotropic liquid crystal phases in the aprotic ionic liquid (AIL) 1-ethyl-3-methylimidazolium tetrafluoroborate ([Emim]BF₄). In this work, we explore the aggregation behaviours in AILs with different alkyl chains on the imidazolium group, i.e., 1-propyl-3-methylimidazolium tetrafluoroborate ([Pmim]BF₄), 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF₄), 1-hexyl-3-methylimidazolium tetrafluoroborate ([Hmim]BF₄) and 1-octyl-3-methylimidazolium tetrafluoroborate ([Omim]BF₄). With the increase of the cation chain length, AILs have better solubility of the solvophobic part of the surfactants and hence a weaker driving force for self-assembly. Therefore, the critical micellization concentration of C₁₆mimBr in AILs increases as confirmed by the surface tension and small angle X-ray scattering characterizations. More interesting things happen to the phase behaviours. Besides the micellar and lamellar lyotropic liquid crystal phases, a hexagonal lyotropic liquid crystal phase is formed in [Pmim]BF₄ while hexagonal and bicontinuous cubic lyotropic liquid crystal phases are formed in [Bmim]BF₄, [Hmim]BF₄ and [Omim]BF₄. It is surprising to observe richer phase behaviours in solvents of lower cohesive energy. The detailed structural information of various aggregates has been obtained by small-angle X-ray scattering. It is demonstrated that AILs work as not only solvents but also co-surfactants.

Selective ion transport across a lipid bilayer in a protic ionic liquid

Ionic liquids (ILs) have exhibited enormous potential as electrolytes, designer solvents and reaction media, as well as being surprisingly effective platforms for amphiphile self-assembly and for preserving structure of complex biomolecules. This has led to their exploration as media for long-term biopreservation and in biosensors, for which their viability depends on their ability to sustain both structure and function within complex, multicomponent nanoscale compartments and assemblies. Here we show that a tethered lipid bilayer can be assembled directly in a purely IL environment that retains its structure upon exchange between IL and aqueous buffer, and that the membrane transporter valinomycin can be incorporated so as to retain its functionality and cation selectivity. This paves the way for the development of long-lived, non-aqueous microreactors and sensor assemblies, and demonstrates the potential for complex proteins to retain functionality in non-aqueous, ionic liquid solvents.

Tuning Nanostructured Lyotropic Liquid Crystalline Mesophases in Lipid Nanoparticles with Protic Ionic Liquids

We herein report 13 protic ionic liquids (PILs) as tunable solvation media to regulate the internal lyotropic liquid crystalline mesophase of monoolein-based nanoparticles. A range of nanostructures, including inverse bicontinuous cubic, inverse hexagonal, and sponge/lamellar mesophases, were produced and verified by synchrotron small-angle X-ray scattering. Notably, manipulating the cation/anion structures of the PILs can alter the monoolein packing behavior and cause a sequential phase transition (hexagonal → cubic → lamellar) in the nanoparticles. The solvent channels inside the nanoparticles were enlarged up to 40% under certain PIL-water conditions, making these materials prospective for encapsulation of large molecules. Finally, a freeze-drying study demonstrated the ability of PILs to preserve nanostructure upon reconstitution of the nanoparticles compared to that in pure water. This study opens a new route for fine-tuning lyotropic liquid crystalline structures using PILs, which circumvents issues encountered using conventional salts.

Effect of Brønsted Acidity on Ion Conduction in Fluorinated Acetic Acid and N-Methylimidazole Equimolar Mixtures as Pseudo-protic Ionic Liquids

To clarify proton conduction mechanism in protic ionic liquids (PILs) and pseudo-PILs (pPILs), equimolar mixtures of N-methylimidazole (C₁Im) with fluorinated acetic acids were investigated by Raman spectroscopy, X-ray scattering, and dielectric relaxation spectroscopy (DRS). Only the ionic species exist in the equimolar mixture of C₁Im and HTFA (HTFA: trifluoroacetic acid). On the other hand, the equimolar mixture of C₁Im and HDFA (HDFA: difluoroacetic acid) consists of both ionic and electrically neutral species. In particular, not only the electrostatic but also van der Waals interactions with the F atoms were observed in the liquid structures of both [C₁hIm⁺][TFA^-] and [C₁hIm⁺][DFA^-]. The concept for proton conduction mechanism that we have proposed in previous study was revisited; the proton conduction mechanism could be classified with two linear free energy relationship lines for proton exchange reaction and translation/rotation of proton carriers. Our results exhibit that the proton conduction mechanism changes from proton hopping to vehicle mechanism with increasing acidity of an acid HA in PILs.

Lyotropic liquid crystal phase behavior of a cationic amphiphile in aqueous and non-stoichiometric protic ionic liquid mixtures

Protic ionic liquids (PILs) are the largest and most tailorable known class of non-aqueous solvents which possess the ability to support amphiphile self-assembly. However, little is known about the effect of solvent additives on this ability. In this study, the lyotropic liquid crystal phase (LLCP) behavior of the cationic surfactant cetyltrimethylammonium bromide (CTAB) was investigated in the model PILs of ethylammonium nitrate (EAN) and ethanolammonium nitrate (EtAN), and derived multi-component solvent systems containing them to determine phase formation and diversity with changing solvent composition. The solvent systems were composed of water, nitric acid and ethylamine (or ethanolamine), with 26 unique compositions for each PIL covering the apparent pH and ionicity ranges of 0-13.5 and 0-11 M, respectively. The LLCPs were studied using cross polarized optical microscopy (CPOM) and small and wide-angle X-ray scattering (SAXS/WAXS). Partial phase diagrams were constructed for CTAB concentrations of 50 wt% and 70 wt% in the temperature range of 25 °C to 75 °C to characterise the effect of surfactant concentration and temperature on the LLCPs in each solvent environment. Normal micellar (L1), hexagonal (H1) and bicontinuous cubic (V1) phases were identified at both surfactant concentrations, and from temperatures as low as 35 °C, with large variations dependent on the solvent composition. The thermal stability and diversity of phases were greater and broader in solvent compositions with excess precursor amines present compared to those in the neat PILs. In acid-rich solvent combinations, the same phase diversity was found, though with reduced onset temperatures of phase formation; however, some structural changes were observed which were attributed to oxidation/decomposition of CTAB in a nitric acid environment. This study showed that the ability of PIL solutions to support amphiphile self-assembly can readily be tuned, and that the ability of PILs to promote amphiphile self-assembly is robust, even with other solvent species present.

Structure and Stability of the Ionic Liquid Clusters [EMIM]n[BF4]n+1- (n = 1-9): Implications for Electrochemical Separations

Precise functionalization of electrodes with size-selected ionic liquid (IL) clusters may improve the application of ILs in electrochemical separations. Herein we report our combined experimental and theoretical investigation of the IL clusters 1-ethyl-3-methylimidazolium tetrafluoroborate [EMIM]_n[BF₄]_n+1^- (n = 1-9) and demonstrate their selectivity and efficiency toward targeted adsorption of ions from solution. The structures and energies of the IL clusters, predicted with global optimization, agree with and help interpret the ion abundances and stabilities measured by high-mass-resolution electrospray ionization mass spectrometry and collision-induced dissociation experiments. The [EMIM][BF₄]₂^- cluster, which was identified as the most stable IL cluster, was selectively soft-landed onto a working electrode. Electrochemical impedance spectroscopy revealed a lower charge transfer resistance on the soft-landed electrode containing [EMIM][BF₄]₂^- compared with an electrode prepared by drop-casting of an IL solution containing the full range of IL clusters. Our findings indicate that specific IL clusters may be used to increase the efficiency of electrochemical separations by lowering the overpotentials involved.

The self-assembly of an imidazolium surfactant in an aprotic ionic liquid. 1. Comparison in aprotic and protic ionic liquids

The aggregation behaviour of a cationic surfactant in an aprotic ionic liquid has been explored. Prolate micelles are formed at low surfactant concentrations, while a lamellar lyotropic liquid crystal phase is formed at high surfactant concentrations.

Catanionic Surfactant Self-Assembly in Protic Ionic Liquids

Mixing of cationic and anionic surfactants in water can result in pseudo-double-tailed catanionic surfactant ion pairs that form lamellar phases or vesicles that are unstable toward electrolyte addition. Here we show that despite the very high ionic strengths, catanionic surfactants counterintuitively form a wider variety of self-assembled aggregates in pure ionic liquids (ILs, pure salts in a liquid phase) than in water, including micelles, vesicles, and lyotropic phases. Self-assembled structures only form when the IL is sufficiently polar to drive self-assembly through electrostatic interactions and/or H-bond networks, but the catanionic effect is manifested only when the IL does not itself exhibit pronounced amphiphilic nanostructure. This enables the type of catanionic aggregate formed to be designed by changing the hydrogen bonds between the ions through variation of the structures of the cation and anion. These results reveal an entirely new way of controlling catanionic surfactant self-assembly under nonaqueous and high-salt conditions.