In Situ Synthesis of a Tumor-Microenvironment-Responsive Chemotherapy Drug

Current chemotherapy still suffers from unsatisfactory therapeutic efficacy, multi-drug resistance, and severe adverse effects, thus necessitating the development of techniques to confine chemotherapy drugs in the tumor microenvironment. Herein, we fabricated nanospheres of mesoporous silica (MS) doped with Cu (MS-Cu) and polyethylene glycol (PEG)-coated MS-Cu (PEG-MS-Cu) as exogenous copper supply systems to tumors. The synthesized MS-Cu nanospheres showed diameters of 30-150 nm with Cu/Si molar ratios of 0.041-0.069. Only disulfiram (DSF) and only MS-Cu nanospheres showed little cytotoxicity in vitro, whereas the combination of DSF and MS-Cu nanospheres showed significant cytotoxicity against MOC1 and MOC2 cells at concentrations of 0.2-1 μg/mL. Oral DSF administration in combination with MS-Cu nanospheres intratumoral or PEG-MS-Cu nanospheres intravenous administration showed significant antitumor efficacy against MOC2 cells in vivo. In contrast to traditional drug delivery systems, we herein propose a system for the in situ synthesis of chemotherapy drugs by converting nontoxic substances into antitumor chemotherapy drugs in a specific tumor microenvironment.

Composites consisting of calcium phosphate cements and mesoporous bioactive glasses as a 3D plottable drug delivery system

Calcium phosphate cements (CPC) and mesoporous bioactive glasses (MBG) are two well studied biomaterial groups widely under investigation on their applicability to treat bone defects in orthopaedics and maxillofacial surgery. Recently the extrusion properties of CPC-MBG composites using a pasty CPC based on a hydrophobic carrier-liquid were studied in our group demonstrating that such composites are suitable for low temperature 3D plotting. Based on this work, we show in this study that by variation of the MBG content in the composite the degradation of the final scaffolds can be influenced. Furthermore, by modifying the cement phase and/or the MBG with therapeutically active ions like strontium, the released ion concentration can be varied over a wide range. In a second step the MBG was functionalized exploiting the high specific surface area of the glass as a carrier system for proteins like lysozyme or grow factors. We developed a protocol that allows the incorporation of protein-laden MBG in CPC pastes without impairing the extrudability of the CPC-MBG composites. Additionally, we found that released proteins from pure MBG or 3D plotted composite-scaffolds maintained their biological activity. Therefore, the combination of CPC and MBG allows the creation of a highly flexible composite system making it a promising candidate for bone tissue engineering. STATEMENT OF SIGNIFICANCE: Calcium phosphate cements and mesoporous bioactive glasses are two promising degradable biomaterials for the regenerative treatment of bone defects. The combination of both materials to a 3D printable composite enables the creation of implants with patient specific geometry. By varying the composition of the composite, the degradation behaviour can be influenced and especially the release of therapeutically active ions is tailorable over a wide range. We demonstrated this for strontium, as it has been shown to stimulate bone formation. Moreover, the bioactive glass can be used as a carrier system for drugs or growth factors and we show the successful combination of such functionalised glass particles and a cement paste without affecting the printability.

Design of novel functionalized collagen-chitosan-MBG scaffolds for enhancing osteoblast differentiation in BMSCs

Collagen and chitosan are two different kinds of natural biodegradable polymers commonly used in the regeneration of bone defects. Mesoporous bioactive glass (MBG) is a type of favorable bone filler which can effectively constitute an enlarged microenvironment to facilitate an exchange of important factors between the cells and scaffolds. Here we prepared a collagen-chitosan-MBG (C-C-MBG) scaffold which displayed significantly increased proliferation, differentiation and mineralization in bone mesenchymal stem cells (BMSCs). Additionally, we found that the scaffold can stimulate extra-cellular signal regulated kinase 1/2 (Erk1/2) activated Runx2 pathway, which is the predominant signaling pathway involved in osteoblast differentiation. Consistently, we observed that the scaffold can markedly enhance the expression ofType I collagen, Osteopontin(Opn), andRunx2, which are important osteoblastic marker genes implicated in the process of osteoblast differentiation. Therefore, we conclude that the composite scaffold can significantly promote the differentiation of BMSCs into osteoblasts by activating Erk1/2-Runx2 pathway. Our finding thereby implies that the C-C-MBG scaffold can possibly act as a potential biomaterial in the bone regeneration.

Protein Immobilization on Heterogeneous (SiO2/ZnO) Hollow-Mesoporous Nanocapsules Prepared by Imprinting CPMV: Drug Delivery and Possibility of Immunological Applications

Herein, we report the protein immobilization and stability studies of heterogeneous hollow mesoporous nanocapsules (Hhmn) for drug and protein delivery. The final results of the diverse precursors such as TEOS, TMOS, APTES, and zinc acetate on the formation of the hollow-mesoporous architecture of nanocapsules have been assimilated in this work. Three types of Hhmn of various sizes were synthesized. Among the three Hhmn, sample I and II nanocapsules were synthesized in the presence of zinc acetate and were identified to be amorphous in nature. Sample III nanocapsules synthesized in the absence of zinc acetate were analogous to the other two synthesized samples. Physiochemical analysis showed the formation of zinc phosphate in the silica matrix for the samples when synthesized with zinc acetate. Specific surface area analysis revealed that sample III has a relatively higher specific surface area. Further, the drug/dye loading and release capacity for the nanocapsules were studied using doxorubicin (DOX) and imatinib mesylate (IM) as model anticancerous drugs and rhodamine 6G as a model dye. Among the synthesized nanocapsules, sample III was shown to have a higher loading capacity for DOX (∼128 μg). From the release kinetic studies of drug/dye, sample III nanocapsules demonstrate a controlled release pattern of DOX and IM. Additionally, protein adsorption and stability studies of samples I and II revealed that the BSA adsorption capacity increases with the increase in the initial concentration of BSA. Furthermore, analysis of the release profiles of BSA and OVA leads to the conclusion that the heterogeneous nanocapsules show a higher loading capacity and sustained release pattern toward OVA. These properties of the nanocapsules highlight their path to immunological applications.

Ion release behavior of vanadium-doped mesoporous bioactive glass particles and the effect of the released ions on osteogenic differentiation of BMSCs via the FAK/MAPK signaling pathway

Vanadium is an important trace element in bone and is involved in bone metabolism, bone formation, and bone growth, but the roles of various vanadium ions, especially of pentavalent vanadium, in bone tissue regenerative repair have been underestimated and even misinterpreted for a long time. The main purposes of this study are to investigate the release profile of Si, Ca, P, and V ions from vanadium doped mesoporous bioactive glass (V-MBG) particles and to explore the effect of pentavalent vanadium ions on proliferation and osteogenic differentiation of BMSCs as well as the corresponding osteogenic signaling pathway. On the basis of preparations of V-MBG particles with different pentavalent vanadium contents, the ion release behavior from V-MBG in distilled water and simulated body fluid was systemically investigated. Furthermore, the cytocompatibility and osteogenic effect of V-MBG extracts were studied in rBMSCs, and the related molecular mechanisms were preliminarily discussed. The results of dissolution experiments showed that the V ionic concentration exhibited a burst increase and then a sustained slow increase in the two media. The resultant V ions from 1.0V-MBG, 4.0V-MBG and 10.0V-MBG at 21 days were about 1.1, 5.8, and 12.5 mg L^-1 in water, respectively, and 1.6, 4.8 and 12.8 mg L^-1 in SBF, respectively. The release behaviors of Si, Ca, P, and V ions were evidently affected by high contents of incorporated vanadium. The cellular results indicated that compared to the control and MBG groups, the V(V) ions in V-MBG extracts at about 19.4 μM markedly promoted the proliferation, the gene and protein expression of BMP-2 and COL-I, and the ALP activity of rBMSCs in non-osteoinductive media, but insignificantly stimulated the OCN protein synthesis. More deeply, V(V) ions at about 19.4 μM significantly upregulated the gene and protein expressions of Itga 2b, FAK, and pERK1/2, demonstrating that V(V) ions could regulate osteogenic differentiation of rBMSCs through the activation of the Itga 2b-FAK-MAPK (pERK1/2) signaling pathway. The in vivo results further confirmed that V-MBG induced and promoted new bone formation in the defect area compared to the PGC and PGC/V-M0 groups. These results would contribute to modify the perception about the biocompatibility and osteogenic promotion of pentavalent vanadium at an appropriate concentration.

Evaluation of bioactive glass scaffolds incorporating SrO or ZnO for bone repair: In vitro bioactivity and antibacterial activity

A series of bioactive glass scaffolds doped with SrO or ZnO (0, 5, and 10 mol%) were synthesized by the foam replica and melting method. The thermodynamic evolution, phase composition, microstructure, ion release, in vitro bioactivity, and oxygen density of the scaffolds were characterized. The proliferation of murine long bone osteocyte Y4 cells was studied by cell culture. The survival rate of the BGs evaluated the antibacterial activity and Escherichia coli strains in co-culture. The results indicated that the process window decreases with the increase of dopants. All the samples have a pore structure size of 200-400 μm. When the scaffolds were immersed in simulated body fluid for 28 days, hydroxyapatite formation was not affected, but the degradation process was retarded. The glass network packing and ionic radii variations of the substitution ions control surface degradation, glass dissolution, and ion release. MTT results revealed that 5Sr-BG had a significant effect on promoting cell proliferation and none of the BGs were cytotoxicity. Sr-BGs and Zn-BGs exhibited significantly inhibited growth against E. coli bacterial strains. Generally, these results showed the 5Sr-BG scaffold with high vitro bioactivity, cell proliferation, and antibacterial property is an important candidate material for bone tissue regeneration and repair.

Nanotherapeutics for regeneration of degenerated tissue infected by bacteria through the multiple delivery of bioactive ions and growth factor with antibacterial/angiogenic and osteogenic/odontogenic capacity

Therapeutic options are quite limited in clinics for the successful repair of infected/degenerated tissues. Although the prevalent treatment is the complete removal of the whole infected tissue, this leads to a loss of tissue function and serious complications. Herein the dental pulp infection, as one of the most common dental problems, was selected as a clinically relevant case to regenerate using a multifunctional nanotherapeutic approach. For this, a mesoporous bioactive glass nano-delivery system incorporating silicate, calcium, and copper as well as loading epidermal growth factor (EGF) was designed to provide antibacterial/pro-angiogenic and osteo/odontogenic multiple therapeutic effects. Amine-functionalized Cu-doped bioactive glass nanospheres (Cu-BGn) were prepared to be 50-60 nm in size, mesoporous, positive-charged and bone-bioactive. The Cu-BGn could release bioactive ions (copper, calcium and silicate ions) with therapeutically-effective doses. The Cu-BGn treatment to human umbilical vein endothelial cells (HUVEC) led to significant enhancement of the migration, tubule formation and expression of angiogenic gene (e.g. vascular endothelial growth factor, VEGF). Furthermore, the EGF-loaded Cu-BGn (EGF@Cu-BGn) showed pro-angiogenic effects with antibacterial activity against E. faecalis, a pathogen commonly involved in the pulp infection. Of note, under the co-culture condition of HUVEC with E. faecalis, the secretion of VEGF was up-regulated. In addition, the osteo/odontogenic stimulation of the EGF@Cu-BGn was evidenced with human dental pulp stem cells. The local administration of the EGF@Cu-BGn in a rat molar tooth defect infected with E. faecalis revealed significant in vivo regenerative capacity, highlighting the nanotherapeutic uses of the multifunctional nanoparticles for regenerating infected/damaged hard tissues.

A Structural Comparison of Ordered and Non-Ordered Ion Doped Silicate Bioactive Glasses

One of the key benefits of sol-gel-derived glasses is the presence of a mesoporous structure and the resulting increase in surface area. This enhancement in textural properties has a significant effect on the physicochemical properties of the materials. In this context the aim of this study was to investigate how sol-gel synthesis parameters can influence the textural and structural properties of mesoporous silicate glasses. We report the synthesis and characterization of metal ion doped sol-gel derived glasses with different dopants in the presence or absence of a surfactant (Pluronic P123) used as structure-directing templating agent. Characterization was done by several methods. Using a structure directing agent led to larger surface areas and highly ordered mesoporous structures. The chemical structure of the non-ordered glasses was modified to a larger extent than the one of the ordered glasses due to increased incorporation of dopant ions into the glass network. The results will help to further understand how the properties of sol-gel glasses can be controlled by incorporation of metal dopants, in conjunction with control over the textural properties, and will be important to optimize the properties of sol-gel glasses for specific applications, e.g., drug delivery, bone regeneration, wound healing, and antibacterial materials.

Recent advances and future perspectives of sol–gel derived porous bioactive glasses: a review

Sol–gel derived bioactive glasses have been extensively explored as a promising and highly porous scaffold materials for bone tissue regeneration applications owing to their exceptional osteoconductivity, osteostimulation and degradation rates.

Rubidium-containing mesoporous bioactive glass scaffolds support angiogenesis, osteogenesis and antibacterial activity

In this study, rubidium-containing mesoporous bioglass (Rb-MBG) scaffolds were formed with the investigation of the influence of Rb addition on angiogenic and osteogenic differentiation abilities of hBMSC. The phase composition, microstructure, pore size distribution, ion release, biological activity, drug loading rate, and release rate of Rb-MBG were characterized. The proliferation and differentiation of hBMSC, the markers of bone formation (ALP, COL-1) and angiogenesis (VEGF, HIF-1α), and wnt/β-catenin related-signaling pathway gene were studied by cell culture. Rb-MBG loaded with antibacterial agents enoxacin (ENX), coliforms and Staphylococcus aureus were cultured together to study the antibacterial effects. The results indicate that the samples have a 350-550 μm large pore structure and 4.5-5.5 nm mesoporous size. Adding Rb can increase the activity of ALP, the secretion of VEGF and COLI, and the expression of HIF-1α of hBMSCs. Rb containing MBG is likely to enhance the proliferation and differentiation of hBMSCs through the influence of Wnt/ß-catenin signal path. Rb-MBG scaffold can load effectively and release Rb ions and ENX continuously to damage the bacterial cell membrane with the synergistic effect, and therefore achieve antibacterial results. In conclusion, adding Rb to MBG supports angiogenesis and osteogenesis of hBMSCs, as well as antibacterial activity.

Mesoporous bioactive glass nanoparticles doped with magnesium: drug delivery and acellular in vitro bioactivity

The effects of the magnesium doping of binary glass (Si–Ca) on particle texture, on the biomineralization process in simulated body fluid (SBF) as well as on drug loading and release were examined. For this purpose, magnesium-doped binary bioglass nanoparticles (85SiO₂–(15 − x)CaO–xMgO, with x = 1, 3, 5 and 10 mol%) were prepared by a base catalysed sol–gel method. N₂ adsorption isotherm analysis showed an enhancement in specific surface area as the Mg molar fraction increased. In addition, the FTIR spectra of the samples after soaking in SBF for various periods of time confirmed the presence of new chemical bonds related to the apatite phase, as was also confirmed by SEM observations. XRD patterns of the samples after soaking revealed that the crystallization to form a more stable apatite-like phase was hindered with increasing magnesium content in the glass composition. Furthermore, it was proved that the kinetics of drug release improved with increasing magnesium content. The porosity and the specific surface area were found to be responsible for this improvement.

The effects of the magnesium doping of binary glass (Si–Ca) on particle texture, on the biomineralization process in simulated body fluid (SBF) as well as on drug loading and release were examined.

Biodegradable Metal Ion-Doped Mesoporous Silica Nanospheres Stimulate Anticancer Th1 Immune Response in Vivo

Modern vaccines usually require accompanying adjuvants to increase the immune response to antigens. Aluminum (alum) compounds are the most commonly used adjuvants in human vaccinations for infection diseases. However, alum adjuvants are nondegradable, cause side effects due to the persistence of alum at injection sites, and are rather ineffective for cancer immunotherapy, which requires the Th1 immune response. Recently, we have shown that a plain mesoporous silica (MS) adjuvant can stimulate Th1 anticancer immunity for cancer vaccines. Herein, MS nanospheres doped with Ca, Mg, and Zn (MS-Ca, MS-Mg, and MS-Zn) showed significantly higher degradation rates than pure MS. Moreover, MS-Ca, MS-Mg, and MS-Zn nanospheres  stimulated anticancer immune response and increased the CD4⁺ and CD8⁺ T cell populations in spleen. The MS-Ca, MS-Mg, and MS-Zn nanospheres with improved biodegradability and excellent ability to induce Th1 anticancer immunity show potential for clinical applications as cancer immunoadjuvants.

Hierarchically porous, and Cu- and Zn-containing γ-AlOOH mesostrands as adjuvants for cancer immunotherapy

Alum is the only licensed adjuvant by Food and Drug Administration of USA used in many human vaccines and has excellent safety record in clinical applications. However, alum hardly induces T helper 1 (Th1) immune responses that are required for anti-tumor immunity. In the present study, we fabricated hierarchical copper- and zinc- buds dressing γ-AlOOH mesostrands (Cu- and Zn-AMSs) with randomly wrinkled morphology, mesoscale void- or cave-like pockets, high-exposed surface coverage sites, and positive charge streams in saline. We confirmed that Cu- and Zn-AMSs promoted intracellular uptake of model cancer antigen (ovalbumin, OVA) by THP-1-differentiated macrophage-like cells in vitro. Moreover, Cu- and Zn-AMSs enhanced maturation and cytokine release of bone marrow dendritic cells in vitro. In vivo study demonstrated that Cu- and Zn-AMSs markedly induced anti-tumor-immunity and enhanced CD₄⁺ and CD₈⁺ T cell populations in splenocytes of mice. These findings demonstrated that hierarchical copper- and zinc- buds dressing γ-AlOOH mesostrands, which are oriented in randomly wrinkled matrice, are suitable platforms as novel adjuvants for cancer immunotherapy.

Biocomposites of copper-containing mesoporous bioactive glass and nanofibrillated cellulose: Biocompatibility and angiogenic promotion in chronic wound healing application

Biocomposites of copper-containing mesoporous bioactive glass (Cu-MBG) and nanofibrillated cellulose (NFC) were designated as potential dressing material for chronic wound healing. The phase composition and mesoporous micro-structure of the synthesized Cu-MBGs were elaborately characterized by combining several techniques, including TEM, SEM, XRD, SXAS and N₂ physisorption. High bioactivity of the Cu-MBG was confirmed in stimulated body fluids in vitro. A controlled dissolution of Cu from the glass suggests Cu-MBG a suitable source for Cu release in wound healing dressings. Depending on the content of Cu-MBG in the composite formulation, the composites were fabricated as membranes and aerogels. In biocompatibility assessment of the composites, a dose-dependent cytotoxicity of Cu²⁺ on 3T3 fibroblasts was found. Importantly, a critical biological level of Cu²⁺ below 10mg/L was suggested for the survival and growth of 3T3 fibroblasts. The Cu²⁺ released from the composite aerogel of NFC and Cu-MBG showed a profound angiogenic effect in the 3D spheroid culture system of human umbilical vein endothelial cells. Moreover, the angiogenic gene expression of 3T3 fibroblast was upregulated in the real-time quantitative PCR analysis, which also confirms that the incorporation of Cu-MBG into NFC matrix enhances the proangiogenic potential of the biocomposites. In addition, composites of NFC and Cu-MBG also showed an inhibiting effect on the growth of E. coli.

STATEMENT OF SIGNIFICANCE

To address an urgent need in clinics on developing a new generation of therapeutic dressings with advanced functionalities, this study has exploited the utilization of Cu-containing mesoporous bioactive glass in the nanocellulose matrix to release Cu²⁺ as therapeutic ions for its angiogenic effect on promoting wound healing. This manuscript reports research work on biomaterial design, fabrication development, material characterizations and bioassessments in 2D cellular studies. To utilize nanocellulose derived from the wood resource in biomedical applications is of great significance, due to its vast availability and bioeconomy competence. The use of Cu-containing bioactive glass in tissue engineering scaffolds, including wound healing, is an intriguing research topic, which has been recently discussed in the field of biomaterials. I think that our manuscript title with 'Biocomposites of copper-containing mesoporous bioactive glass and nanofibrillated cellulose: biocompatibility and angiogenic promotion in chronic wound healing application' will make its own contribution on understanding the complex effects of Cu²⁺ on wound-healing-relevant events with acceptable novelty for Acta Biomaterialia.

Incorporation of particulate bioactive glasses into a dental root canal sealer

Flame spray synthesis has opened the possibility to add additional elements to complex materials such as bioactive glasseswhile maintaining nanoparticulate properties. In this study, it was investigated whether a flamesprayed bismuth oxide doped nanometric 45S5 bioactive glass could be incorporated into a commercially available epoxy-resin root canal sealer, and how this compared to a conventional, pure 45S5 micrometric bioactive glass. Effects on radiopacity, microhardness, pH and mineral induction in phosphate buffered saline and simulated body fluid were studied. It was revealed that the radiopaque nanometric bismuth-containing 45S5 bioactive glass reduced radiopacity of the root canal sealer less than a conventional micrometric counterpart. In addition, pH induction and calcium phosphate precipitation were quicker with the nanometric compared to the micrometric material, whilst the micrometric glass displayed a higher alkaline capacity. Both materials apparently bound to the epoxy resin matrix, thus increasing its microhardness after polymerization reaction. Effects were dose-dependent. The investigated radiopaque bioactive glass containing bismuth oxide could be a valuable add-on for current root canal sealers.

Review and the state of the art: Sol-gel and melt quenched bioactive glasses for tissue engineering

Biomaterial development is currently the most active research area in the field of biomedical engineering. The bioglasses possess immense potential for being the ideal biomaterials due to their high adaptiveness to the biological environment as well as tunable properties. Bioglasses like 45S5 has shown great clinical success over the past 10 years. The bioglasses like 45S5 were prepared using melt-quenching techniques but recently porous bioactive glasses have been derived through sol-gel process. The synthesis route exhibits marked effect on the specific surface area, as well as degradability of the material. This article is an attempt to provide state of the art of the sol-gel and melt quenched bioactive bioglasses for tissue regeneration. Fabrication routes for bioglasses suitable for bone tissue engineering are highlighted and the effect of these fabrication techniques on the porosity, pore-volume, mechanical properties, cytocompatibilty and especially apatite layer formation on the surface of bioglasses is analyzed in detail. Drug delivery capability of bioglasses is addressed shortly along with the bioactivity of mesoporous glasses. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1248-1275, 2016.

Tailoring the biological response of mesoporous bioactive materials

Mesoporous bioactive glasses can be tailored using structure directing agents to optimize their biological response.

Stimulatory effects of the fast setting and suitable degrading Ca–Si–Mg cement on both cementogenesis and angiogenesis differentiation of human periodontal ligament cells

The purpose of this study is to develop a fast setting and suitable degrading Mg–calcium silicate cement (Mg–CS) and a mechanism using Mg ions to stimulate human periodontal ligament cells (hPDLCs).

Preparation, physicochemical properties and in vitro bioactivity of hierarchically porous bioactive glass scaffolds

Bioactive glass scaffolds with macropores (300–500 μm), midpores (20 nm to 2 μm) and mesopores (around 5 nm) were prepared using P123, yeast cells and polyurethane sponges as templates.

In vitro antibacterial capacity and cytocompatibility of SiO2-CaO-P2O5 meso-macroporous glass scaffolds enriched with ZnO

Zn²⁺ ions exhibit osteogenic, angiogenic and antimicrobial properties. For this reason, they are often added in small amounts to bioceramics being investigated for bone tissue engineering. In this paper, the cytocompatibility and antibacterial properties of 80% SiO₂-15% CaO-5% P₂O₅ (mol%) mesoporous bioactive glass (MBG) scaffolds substituted with 4.0% and 7.0% of ZnO were studied and compared with the Zn-free scaffold. Cell proliferation, morphology, differentiation and cytotoxic effects of Zn²⁺ ions released from the samples were examined by culturing human osteoblast-like cells (HOS) osteoblasts both in the presence of sample extracts and on the scaffold surface. The bacterial inhibition capacity of the scaffolds was explored by using Gram-positive Stapylococcus aureus bacteria, responsible for numerous infections in orthopedic surgery, to simulate a severe infection. Our results show that the Zn-MBG scaffolds possess a hierarchical meso-macropore structure suitable for osteoblast growth. Furthermore, the amount of Zn²⁺ released from the scaffold with 4.0% ZnO was found to be more favorable for HOS cell development than that released from the scaffold including 7.0% ZnO. Zn²⁺ released to the medium from both scaffolds exhibited antibacterial properties against S. aureus. Thus, the cytocompatibility and the antibacterial ability exhibited by the MBG scaffold containing 4.0% ZnO make it a suitable candidate for bone regeneration applications.

Osteoblastic differentiation under controlled bioactive ion release by silica and titania doped sodium-free calcium phosphate-based glass

Sodium-free phosphate-based glasses (PGs) doped with both SiO2 and TiO2 (50P2O5-40CaO-xSiO2-(10-x)TiO2, where x=10, 7, 5, 3, and 0mol%) were developed and characterised for controlled ion release applications in bone tissue engineering. Substituting SiO2 with TiO2 directly increased PG density and glass transition temperature, indicating a cross-linking effect of Ti on the glass network which was reflected by significantly reduced degradation rates in an aqueous environment. X-ray diffraction confirmed the presence of Ti(P2O7) in crystallised TiO2-containing PGs, and nuclear magnetic resonance showed an increase in Q(1) phosphate species with increasing TiO2 content. Substitution of SiO2 with TiO2 also reduced hydrophilicity and surface energy. In biological assays, MC3T3-E1 pre-osteoblasts effectively adhered to the surface of PG discs and the incorporation of TiO2, and hence higher stability of the PG network, significantly increased cell viability and metabolic activity indicating the biocompatibility of the PGs. Addition of SiO2 increased ionic release from the PG, which stimulated alkaline phosphatase (ALP) activity in MC3T3-E1 cells upon ion exposure. The incorporation of 3mol% TiO2 was required to stabilise the PG network against unfavourable rapid degradation in aqueous environments. However, ALP activity was greatest in PGs doped with 5-7mol% SiO2 due to up-regulation of ionic concentrations. Thus, the properties of PGs can be readily controlled by modifying the extent of Si and Ti doping in order to optimise ion release and osteoblastic differentiation for bone tissue engineering applications.

Strontium-containing mesoporous bioactive glass scaffolds with improved osteogenic/cementogenic differentiation of periodontal ligament cells for periodontal tissue engineering

To achieve the ultimate goal of periodontal tissue engineering, it is of great importance to develop bioactive scaffolds which can stimulate the osteogenic/cementogenic differentiation of periodontal ligament cells (PDLCs) for the favorable regeneration of alveolar bone, root cementum and periodontal ligament. Strontium (Sr) and Sr-containing biomaterials have been found to induce osteoblast activity. However, there has been no systematic report about the interaction between Sr or Sr-containing biomaterials and PDLCs for periodontal tissue engineering. The aims of this study were to prepare Sr-containing mesoporous bioactive glass (Sr-MBG) scaffolds and investigate whether the addition of Sr could stimulate osteogenic/cementogenic differentiation of PDLCs in a tissue-engineering scaffold system. The composition, microstructure and mesopore properties (specific surface area, nanopore volume and nanopore distribution) of Sr-MBG scaffolds were characterized. The proliferation, alkaline phosphatase (ALP) activity and osteogenesis/cementogenesis-related gene expression (ALP, Runx2, Col I, OPN and CEMP1) of PDLCs on different kinds of Sr-MBG scaffolds were systematically investigated. The results show that Sr plays an important role in influencing the mesoporous structure of MBG scaffolds in which high contents of Sr decreased the well-ordered mesopores as well as their surface area/pore volume. Sr(2+) ions could be released from Sr-MBG scaffolds in a controlled way. The incorporation of Sr into MBG scaffolds has significantly stimulated ALP activity and osteogenesis/cementogenesis-related gene expression of PDLCs. Furthermore, Sr-MBG scaffolds in a simulated body fluid environment still maintained excellent apatite-mineralization ability. The study suggests that the incorporation of Sr into MBG scaffolds is a viable way to stimulate the biological response of PDLCs. Sr-MBG scaffolds are a promising bioactive material for periodontal tissue-engineering applications.

Mesoporous bioactive glasses as drug delivery and bone tissue regeneration platforms

The use of mesoporous bioactive glasses (MBG) for drug delivery and bone tissue regeneration has grown significantly over the past 5 years. In this article, we highlight recent advances made in the preparation of MBG particles, spheres, fibers and scaffolds. The advantages of MBG for drug delivery and bone scaffold applications are related to this material's well-ordered mesopore channel structure, superior bioactivity and its capability to deliver both hydrophilic and hydrophobic drugs. A brief forward-looking perspective on the potential clinical applications of MBG in regenerative medicine is also discussed.

Mesoporous bioactive glasses: structure characteristics, drug/growth factor delivery and bone regeneration application

The impact of bone diseases and trauma in the whole world has increased significantly in the past decades. Bioactive glasses are regarded as an important bone regeneration material owing to their generally excellent osteoconductivity and osteostimulativity. A new class of bioactive glass, referred to as mesoporous bioglass (MBG), was developed 7 years ago, which possess a highly ordered mesoporous channel structure and a highly specific surface area. The study of MBG for drug/growth factor delivery and bone tissue engineering has grown significantly in the past several years. In this article, we review the recent advances of MBG materials, including the preparation of different forms of MBG, composition-structure relationship, efficient drug/growth factor delivery and bone tissue engineering application. By summarizing our recent research, the interaction of MBG scaffolds with bone-forming cells, the effect of drug/growth factor delivery on proliferation and differentiation of tissue cells and the in vivo osteogenesis of MBG scaffolds are highlighted. The advantages and limitations of MBG for drug delivery and bone tissue engineering have been compared with microsize bioactive glasses and nanosize bioactive glasses. The future perspective of MBG is discussed for bone regeneration application by combining drug delivery with bone tissue engineering and investigating the in vivo osteogenesis mechanism in large animal models.

Preparation and characterization of bioactive glass nanoparticles prepared by sol-gel for biomedical applications

Bioactive glass nanoparticles (BG-NPs), based on both ternary (SiO(2)-CaO-P(2)O(5)) and binary (SiO(2)-CaO) systems, were prepared via an optimized sol-gel method. The pH of preparation and the effect of heat treatment temperature were evaluated, as well as the effect of suppressing P in the bioactivity ability of the materials. The morphology and composition of the BG-NPs were studied using FTIR, XRD and SEM. The bioactive character of these materials was accessed in vitro by analyzing the ability for apatite formation onto the surface after being immersed in simulated body fluid (SBF). XRD, EDX and SEM were used to confirm the bioactivity of the materials. The BG-NP effect on cell metabolic activity was assessed by seeding L929 cells with their leachables, proving the non-cytotoxicity of the materials. Finally the most bioactive BG-NPs developed (ternary system prepared at pH 11.5 and treated at 700 °C) were successfully combined with chitosan in the production of biomimetic nanocomposite osteoconductive membranes that could have the potential to be used in guided tissue regeneration.

Synthesis and characterization of hierarchically macroporous and mesoporous CaO-MO-SiO(2)-P(2)O(5) (M=Mg, Zn, Sr) bioactive glass scaffolds

Mg-, Zn- and Sr-doped hierarchically macroporous and mesoporous CaO-MO-SiO(2)-P(2)O(5) (M=Mg, Zn or Sr) bioactive glass (HMMBG) scaffolds were synthesized using the non-ionic block copolymer EO(20)PO(70)EO(20) and polyurethane sponges as cotemplates. The Mg-, Zn- or Sr-doped HMMBG scaffolds showed no distinct difference in phase composition, macroporous structure or pore volume from the HMMBG scaffolds without Mg, Zn or Sr. The Mg-, Zn- and Sr-doped HMMBG scaffolds showed no cytotoxicity. The gradual release of Ca, P, Si, Mg, Zn and Sr into the culture medium from these scaffolds contributed to the enhancement of the proliferation and ALP activity of mesenchymal stem cells (MSCs). The Mg-, Zn- and Sr-doped HMMBG scaffolds may be used as bone substitute materials.

A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics

Several inorganic materials such as special compositions of silicate glasses, glass-ceramics and calcium phosphates have been shown to be bioactive and resorbable and to exhibit appropriate mechanical properties which make them suitable for bone tissue engineering applications. However, the exact mechanism of interaction between the ionic dissolution products of such inorganic materials and human cells are not fully understood, which has prompted considerable research work in the biomaterials community during the last decade. This review comprehensively covers literature reports which have investigated specifically the effect of dissolution products of silicate bioactive glasses and glass-ceramics in relation to osteogenesis and angiogenesis. Particularly, recent advances made in fabricating dense biomaterials and scaffolds doped with trace elements (e.g. Zn, Sr, Mg, and Cu) and investigations on the effect of these elements on the scaffold biological performance are summarized and discussed in detail. Clearly, the biological response to artificial materials depends on many parameters such as chemical composition, topography, porosity and grain size. This review, however, focuses only on the ion release kinetics of the materials and the specific effect of the released ionic dissolution products on human cell behaviour, providing also a scope for future investigations and identifying specific research needs to advance the field. The biological performance of pure and doped silicate glasses, phosphate based glasses with novel specific compositions as well as several other silicate based compounds are discussed in detail. Cells investigated in the reviewed articles include human osteoblastic and osteoclastic cells as well as endothelial cells and stem cells.