Controlled Synthesis of Unconventional Phase Alloy Nanobranches for Highly Selective Electrocatalytic Nitrite Reduction to Ammonia

The controlled synthesis of metal nanomaterials with unconventional phases is of significant importance to develop high-performance catalysts for various applications. However, it remains challenging to modulate the atomic arrangements of metal nanomaterials, especially the alloy nanostructures that involve different metals with distinct redox potentials. Here we report the general one-pot synthesis of IrNi, IrRhNi and IrFeNi alloy nanobranches with unconventional hexagonal close-packed (hcp) phase. Notably, the as-synthesized hcp IrNi nanobranches demonstrate excellent catalytic performance towards electrochemical nitrite reduction reaction (NO2RR), with superior NH3 Faradaic efficiency and yield rate of 98.2 % and 34.6 mg h-1 mgcat -1 (75.5 mg h-1 mgIr -1) at 0 and -0.1 V (vs reversible hydrogen electrode), respectively. Ex/in situ characterizations and theoretical calculations reveal that the Ir-Ni interactions within hcp IrNi alloy improve electron transfer to benefit both nitrite activation and active hydrogen generation, leading to a stronger reaction trend of NO2RR by greatly reducing energy barriers of rate-determining step.

Magnetically Induced Anisotropic Interaction in Colloidal Assembly

The wide accessibility to nanostructures with high uniformity and controllable sizes and morphologies provides great opportunities for creating complex superstructures with unique functionalities. Employing anisotropic nanostructures as the building blocks significantly enriches the superstructural phases, while their orientational control for obtaining long-range orders has remained a significant challenge. One solution is to introduce magnetic components into the anisotropic nanostructures to enable precise control of their orientations and positions in the superstructures by manipulating magnetic interactions. Recognizing the importance of magnetic anisotropy in colloidal assembly, we provide here an overview of magnetic field-guided self-assembly of magnetic nanoparticles with typical anisotropic shapes, including rods, cubes, plates, and peanuts. The Review starts with discussing the magnetic energy of nanoparticles, appreciating the vital roles of magneto-crystalline and shape anisotropies in determining the easy magnetization direction of the anisotropic nanostructures. It then introduces superstructures assembled from various magnetic building blocks and summarizes their unique properties and intriguing applications. It concludes with a discussion of remaining challenges and an outlook of future research opportunities that the magnetic assembly strategy may offer for colloidal assembly.

One-Pot Seed-Mediated Growth of Co Nanoparticles by the Polyol Process: Unraveling the Heterogeneous Nucleation

The one-step seed-mediated synthesis is widely used for the preparation of ferromagnetic metal nanoparticles (NPs) since it offers a good control of particle morphology. Nevertheless, this approach suffers from a lack of mechanistic studies because of the difficulties of following in real time the heterogeneous nucleation and predicting structure effects with seeds that are generated in situ. Here, we propose a complete scheme of the heteronucleation process involved in one-pot seed-mediated syntheses of cobalt nanoparticles in liquid polyols, relying on geometrical phase analysis (GPA) of high-resolution high-angle annular dark field (HAADF)-STEM images and in situ measurements of the molecular hydrogen evolution. Cobalt particles of different shapes (rods, platelets, or hourglass-like particles) were grown by reducing cobalt carboxylate in liquid polyols in the presence of iridium or ruthenium chloride as the nucleating agent. A reaction scheme was established by monitoring the H₂ evolution resulting from the decomposition of metal hydrides, formed in situ by β-elimination of metal alkoxides, and from the polyol dehydrogenation, catalytically activated by the metal particles. This is a very good probe for both the noble metal nucleation and the heterogeneous nucleation of cobalt, showing a good separation of these two steps. Ir and Ru seeds with a size in the range 1-2 nm were found exactly in the center of the cobalt particles, whatever the cobalt particle shape, and high-resolution images revealed an epitaxial growth of the hcp Co on fcc Ir or hcp Ru seeds. The microstructure analysis around the seeds made evident two different ways of relaxing the lattice mismatch between the seeds and the cobalt, with the presence of dislocations around the Ir seeds and compression zones of the cobalt lattice near the Ru seeds. The relationship between the nature of the nucleating agent, the reaction steps, and the microstructure is discussed.

The polyol process: a unique method for easy access to metal nanoparticles with tailored sizes, shapes and compositions

After about three decades of development, the polyol process is now widely recognized and practised as a unique soft chemical method for the preparation of a large variety of nanoparticles which can be used in important technological fields. It offers many advantages: low cost, ease of use and, very importantly, already proven scalability for industrial applications. Among the different classes of inorganic nanoparticles which can be prepared in liquid polyols, metals were the first reported. This review aims to give a comprehensive account of the strategies used to prepare monometallic nanoparticles and multimetallic materials with tailored size and shape. As regards monometallic materials, while the preparation of noble as well as ferromagnetic metals is now clearly established, the scope of the polyol process has been extended to the preparation of more electropositive metals, such as post-transition metals and semi-metals. The potential of this method is also clearly displayed for the preparation of alloys, intermetallics and core-shell nanostructures with a very large diversity of compositions and architectures.

Air-Stable Anisotropic Monocrystalline Nickel Nanowires Characterized Using Electron Holography

Nickel is capable of discharging electric and magnetic shocks in aerospace materials thanks to its conductivity and magnetism. Nickel nanowires are especially desirable for such an application as electronic percolation can be achieved without significantly increasing the weight of the composite material. In this work, single-crystal nickel nanowires possessing a homogeneous magnetic field are produced via a metal-organic precursor decomposition synthesis in solution. The nickel wires are 20 nm in width and 1-2 μm in length. The high anisotropy is attained through a combination of preferential crystal growth in the ⟨100⟩ direction and surfactant templating using hexadecylamine and stearic acid. The organic template ligands protect the nickel from oxidation, even after months of exposure to ambient conditions. These materials were studied using electron holography to characterize their magnetic properties. These thin nanowires display homogeneous ferromagnetism with a magnetic saturation (517 ± 80 emu cm^-3), which is nearly equivalent to that of bulk nickel (557 emu cm^-3). Nickel nanowires were incorporated into carbon composite test pieces and were shown to dramatically improve the electric discharge properties of the composite material.

Platinum-nickel alloy excavated nano-multipods with hexagonal close-packed structure and superior activity towards hydrogen evolution reaction

Crystal phase regulations may endow materials with enhanced or new functionalities. However, syntheses of noble metal-based allomorphic nanomaterials are extremely difficult, and only a few successful examples have been found. Herein, we report the discovery of hexagonal close-packed Pt-Ni alloy, despite the fact that Pt-Ni alloys are typically crystallized in face-centred cubic structures. The hexagonal close-packed Pt-Ni alloy nano-multipods are synthesized via a facile one-pot solvothermal route, where the branches of nano-multipods take the shape of excavated hexagonal prisms assembled by six nanosheets of 2.5 nm thickness. The hexagonal close-packed Pt-Ni excavated nano-multipods exhibit superior catalytic property towards the hydrogen evolution reaction in alkaline electrolyte. The overpotential is only 65 mV versus reversible hydrogen electrode at a current density of 10 mA cm^-2, and the mass current density reaches 3.03 mA μgPt^-1 at -70 mV versus reversible hydrogen electrode, which outperforms currently reported catalysts to the best of our knowledge.

High coercivity stellated cobalt metal multipods through solvothermal reduction of cobalt hydroxide nanosheets

Solvated 2D nanosheets of dodecylsulphate intercalated α-cobalt hydroxide in 1-butanol are solvothermally reduced to hexagonal close packed (hcp) Co metal multipods in the presence of oleylamine.

Dense arrays of cobalt nanorods as rare-earth free permanent magnets

We demonstrate in this paper the feasibility to elaborate rare-earth free permanent magnets based on cobalt nanorods assemblies with energy product (BH)max exceeding 150 kJ m(-3). The cobalt rods were prepared by the polyol process and assembled from wet suspensions under a magnetic field. Magnetization loops of dense assemblies with remanence to a saturation of 0.99 and squareness of 0.96 were measured. The almost perfect M(H) loop squareness together with electron microscopy and small angle neutron scattering demonstrate the excellent alignment of the rods within the assemblies. The magnetic volume fraction was carefully measured by coupling magnetic and thermogravimetric analysis and found in the range from 45 to 55%, depending on the rod diameter and the alignment procedure. This allowed a quantitative assessment of the (BH)max values. The highest (BH)max of 165 kJ m(-3) was obtained for a sample combining a high magnetic volume fraction and a very large M(H) loop squareness. This study shows that this bottom-up approach is very promising to get new hard magnetic materials that can compete in the permanent magnet panorama and fill the gap between the ferrites and the NdFeB magnets.

Designing axial growth of Co-Ni bimetallic nanowires with hexagon-like caps and their catalytic hydrogenation for nitrobenzene

Co-Ni bimetal nanocrystals, which are constructed with long wires and hexagon-like caps, were synthesized through supersaturation, precipitation, and axial growth from the prenucleated bimetal seeds. These Co-Ni bimetallic nanowires with hexagonal caps are more effective than corresponding nanoparticles for the catalytic hydrogenation of nitrobenzene to produce aniline.

Control of the anisotropic shape of cobalt nanorods in the liquid phase: from experiment to theory… and back

The polyol process is one of the few methods allowing the preparation of metal nanoparticles in solution. Hexagonal close packed monocrystalline Co nanorods are easily obtained in basic 1,2-butanediol at 448 K after a few minutes using a Co(II) dicarboxylate precursor. By using a combined experimental and theoretical approach, this study aims at a better understanding of the growth of anisotropic cobalt ferromagnetic nanoparticles by the polyol process. The growth of Co nanorods along the c axis of the hexagonal system was clearly evidenced by transmission electron microscopy, while the mean diameter was found to be almost constant at about 15 nm. Powder X-ray diffraction data showed that metallic cobalt was generated at the expense of a non-reduced solid lamellar intermediate phase which can be considered as a carboxylate ligand reservoir. Density functional theory calculations combined with a thermodynamic approach unambiguously showed that the main parameter governing the shape of the objects is the chemical potential of the carboxylate ligand: the crystal habit was deeply modified from rods to platelets when increasing the concentration of the ligand, i.e. its chemical potential. The approach presented in this study could be extended to a large number of particle types and growth conditions, where ligands play a key role in determining the particle shape.

A study on the synthesis of Ni50Co50 alloy nanostructures with tuned morphology through metal–organic chemical routes

Isotropic and anisotropic NiCo alloy nanoparticles, as well as elongated nanostructures (nanorods, nanowires) with a tuned size, shape as well as stoichiometric overall composition are synthesized by employing a H₂-assisted metal–organic chemical approach.