Synthesis and properties of thienonaphtho[bc]pyridines and thienonaphtho[bc]quinolines

The incorporation of heteroatoms within polycyclic aromatic compounds has gained significant interest due to its potential to effectively alter the inherent physicochemical properties of compounds without the need for profound structural changes. We herein report the development of a modular synthesis of hitherto unknown thienonaphtho[bc]pyridines and thienonaphtho[bc]quinolines in very good yields by Brønsted acid mediated cycloisomerization, permitting selective access to two isomeric products that are isoelectronic to the parent dibenzopyrene. The photophysical and electrochemical properties of the desired compounds were extensively studied and further complemented by DFT calculations.

Synthesis and Properties of Dibenzo-Fused Naphtho[2,3-b:6,7-b']disilole and Naphtho[2,3-b:6,7-b']diphosphole

Silole- and phosphole-containing polycyclic aromatic compounds have attracted significant attention in the field of organic functional materials. The structure of the aromatic units has great impact on the photophysical properties of the resulting silole- and phosphole-containing polycyclic aromatic compounds. Here, dibenzo-fused naphtho[2,3-b:6,7-b']disilole (NDS) and naphtho[2,3-b:6,7-b']diphosphole (NDP), where a naphthalene unit is arranged between two silole and phosphole units, respectively, were designed and synthesized. The solid-state structures of them were confirmed by X-ray crystallographic analysis. The photophysical properties were evaluated by UV-vis absorption and photoluminescence spectroscopies and compared with those of their related compounds, such as dibenzo-fused silolo[3,2-b]silole and benzo[1,2-b:4,5-b']disilole, ever reported. The longest wavelength absorption band of a series of silole-fused compounds was found to be red-shifted in the order benzo[1,2-b:4,5-b']disilole < NDS < silolo[3,2-b]silole derivatives. For a series of phosphole-fused compounds, π-extension from phospholo[3,2-b]phosphole to NDP derivatives induces the lower absorption coefficient of the longest wavelength absorption band and the red-shift of the second longest wavelength absorption band. Both NDS and NDP exhibit much lower fluorescence quantum yields than their related compounds.

A high-performance organic lithium salt-doped OFET with the optical radical effect for photoelectric pulse synaptic simulation and neuromorphic memory learning

Simulation of synaptic characteristics is essential for the application of organic field effect transistors (OFETs) in neural morphology. Although excellent performance, including bias stability and mobility, as well as photoelectric pulse synaptic simulation, has been achieved in SiO2-gated OFETs with PDVT-10 as an organic channel, there are relatively few studies on photoelectric pulse synaptic simulation of electrolyte-gated OFETs based on environmentally friendly and low-voltage operation. Herein, synaptic transistors based on organic semiconductors are reported to simulate the photoelectric pulse response by developing solution-based organic semiconductor PDVT-10, and polyvinyl alcohol (PVA) with an electric double layer (EDL) effect to act as a channel and gate dielectric layer, respectively, and organic lithium salt-doped PVA is used to enhance the EDL effect. The presence of electrical pulses in doped devices not only achieves basic electrical synaptic characteristics, but also significantly realizes the long-term characteristics, pain perception, memory and sensitization applications. Furthermore, the introduction of photoinitiator molecules into the channel layer leads to improved photosynaptic performances by using light-induced free radicals, and the photoelectric synergistic effect has been actualized by introducing heterojunction architecture. This work provides promising prospects for achieving photoelectric pulse modulation based on organic synaptic devices, which shows great potential for the development of artificial intelligence.

Regioselective Electrooxidative [3+2] Annulation between Indole and Aniline Derivatives to Construct Functionalized Indolo[2,3-b]indoles

A protocol for the electrooxidative [3+2] annulation to generate indolo[2,3-b]indoles in an undivided cell is reported. It exhibits good yields with excellent regioselectivities and tolerates various functional groups without external chemical oxidants. Cyclic voltammetry and density functional theory calculations indicate that the [3+2] annulation is initiated by the simultaneous anodic oxidation of indole and aniline derivatives, and the step to determine the rate relies on the combination of radical cations.

Molecular Electronics: From Nanostructure Assembly to Device Integration

Integrated electronics and optoelectronics based on organic semiconductors have attracted considerable interest in displays, photovoltaics, and biosensing owing to their designable electronic properties, solution processability, and flexibility. Miniaturization and integration of devices are growing trends in molecular electronics and optoelectronics for practical applications, which requires large-scale and versatile assembly strategies for patterning organic micro/nano-structures with simultaneously long-range order, pure orientation, and high resolution. Although various integration methods have been developed in past decades, molecular electronics still needs a versatile platform to avoid defects and disorders due to weak intermolecular interactions in organic materials. In this perspective, a roadmap of organic integration technologies in recent three decades is provided to review the history of molecular electronics. First, we highlight the importance of long-range-ordered molecular packing for achieving exotic electronic and photophysical properties. Second, we classify the strategies for large-scale integration of molecular electronics through the control of nucleation and crystallographic orientation, and evaluate them based on factors of resolution, crystallinity, orientation, scalability, and versatility. Third, we discuss the multifunctional devices and integrated circuits based on organic field-effect transistors (OFETs) and photodetectors. Finally, we explore future research directions and outlines the need for further development of molecular electronics, including assembly of doped organic semiconductors and heterostructures, biological interfaces in molecular electronics and integrated organic logics based on complementary FETs.

Recent synthetic strategies of small heterocyclic organic molecules with optoelectronic applications: a review

Over the past few years, there have been tremendous developments in the design and synthesis of organic optoelectronic materials with appealing applications in device fabrication of organic light-emitting diodes, superconductors, organic lasers, organic field-effect transistors, clean energy-producing organic solar cells, etc. There is an increasing demand for the synthesis of green, highly efficient organic optoelectronic materials to cope with the issue of efficiency roll-off in organic semiconductor-based devices. This review systematically summarized the recent progress in the design and synthesis of small organic molecules having promising optoelectronic properties for their potential applications in optoelectronic devices during the last 10-year range (2010-early 2021).

Synthesis, Photophysical Properties and Self-Assembly of a Tetraphenylethylene-Naphthalene Diimide Donor-Acceptor Molecule

The development of new π-conjugated molecular structures with controlled self-assembly and distinct photophysical properties is crucial for advancing applications in optoelectronics and biomaterials. This study introduces the synthesis and detailed self-assembly analysis of tetraphenylethylene (TPE) functionalized naphthalene diimide (NDI), a novel donor-acceptor molecular structure referred to as TPE-NDI. The investigation specifically focuses on elucidating the self-assembly behavior of TPE-NDI in mixed solvents of varying polarities, namely chloroform: methylcyclohexane (CHCl3 : MCH) and chloroform: methanol (CHCl3 : MeOH). Employing a several analytical methodologies, including UV-Vis absorption and fluorescence emission spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and dynamic light scattering (DLS), these self-assembled systems have been comprehensively examined. The results reveal that TPE-NDI manifests as distinct particles in CHCl3 : MCH (fMCH =90 %), while transitioning to flower-like assemblies in CHCl3 : MeOH (fMeOH =90 %). This finding underscores the critical role of solvent polarity in dictating the morphological characteristics of TPE-NDI self-assembled aggregates. Furthermore, the study proposes a molecular packing mechanism, based on SEM data, offering significant insights into the design and development of functional supramolecular systems. Such advancements in understanding the molecular self-assembly new π-conjugated molecular structures are anticipated to pave the way for novel applications in material science and nanotechnology.

Incorporation of Diketopyrrolopyrrole into Polythiophene for the Preparation of Organic Polymer Transistors

Polythiophene, as a class of potential electron donor units, is widely used in organic electronics such as transistors. In this work, a novel polymeric material, PDPPTT-FT, was prepared by incorporating the electron acceptor unit into the polythiophene system. The incorporation of the DPP molecule assists in improving the solubility of the material and provides a convenient method for the preparation of field effect transistors via subsequent solution processing. The introduction of fluorine atoms forms a good intramolecular conformational lock, and theoretical calculations show that the structure displays excellent co-planarity and regularity. Grazing incidence wide-angle X-ray (GIWAXS) results indicate that the PDPPTT-FT is highly crystalline, which facilitates carrier migration within and between polymer chains. The hole mobility of this π-conjugated material is as high as 0.30 cm2 V-1 s-1 in organic transistor measurements, demonstrating the great potential of this polymer material in the field of optoelectronics.

Fully Aromatic Self-Assembled Hole-Selective Layer toward Efficient Inverted Wide-Bandgap Perovskite Solar Cells with Ultraviolet Resistance

Ultraviolet-induced degradation has emerged as a critical stability concern impeding the widespread adoption of perovskite solar cells (PSCs), particularly in the context of phase-unstable wide-band gap perovskite films. This study introduces a novel approach by employing a fully aromatic carbazole-based self-assembled monolayer, denoted as (4-(3,6-dimethoxy-9H-carbazol-9-yl)phenyl)phosphonic acid (MeO-PhPACz), as a hole-selective layer (HSL) in inverted wide-band gap PSCs. Incorporating a conjugated linker plays a pivotal role in promoting the formation of a dense and highly ordered HSL on substrates, facilitating subsequent perovskite interfacial interactions, and fostering the growth of uniform perovskite films. The high-quality film could effectively suppress interfacial non-radiative recombination, improving hole extraction/transport efficiency. Through these advancements, the optimized wide-band gap PSCs, featuring a band gap of 1.68 eV, attain an impressive power conversion efficiency (PCE) of 21.10 %. Remarkably, MeO-PhPACz demonstrates inherent UV resistance and heightened UV absorption capabilities, substantially improving UV resistance for the targeted PSCs. This characteristic holds significance for the feasibility of large-scale outdoor applications.

Noncovalent Dualism in Perylene-Diimide-Based Keggin Anion Complexes: Theoretical and Experimental studies

We report the synthesis and comprehensive characterization of organic-inorganic hybrid salts formed by bis-cationic N,N'-bis(2-(trimethylammonium)ethylene)perylene-3,4,9,10-tetracarboxylic acid bisimide (PTCD2+) and Keggin-type [XW12O40]n- (X = Si, n = 4; X = P, n = 3) polyoxometalates. (PTCD)3[PW12O40]2·3DMSO·2H2O (2) and (PTCD)2[SiW12O40]·DMSO·2H2O (3) were structurally characterized by single crystal X-ray diffraction. The cations in both structures exhibited infinite chainlike arrangements through π-π interactions, contrasting with the previously reported cation-anion stacking observed in naphthalene diimide derivatives. A detailed theoretical study employing topological analysis of the electron density distribution within the quantum theory of atoms in molecules approach provided further insights into this structural dualism. Atomic force microscopy analyses revealed the formation of self-assembled supramolecular structures on graphite from molecular monolayers (3 nm of thick) to submicrometer aggregates for 2. Hyperspectral Raman spectroscopy imaging revealed that such heterostructures are likely formed by an enhanced π-π interactions. Both complexes demonstrated interesting electrochemical behavior, photoluminescence and X-ray-induced luminescence. Electron spin resonance analysis confirmed charge separation in both compounds, with enhanced efficiency observed in compound 2. Our findings of these perylene-based organic-inorganic hybrid salts offer the potential for their application in optoelectronic devices and functional materials.

Synthesis of p-Azaquinodimethane-based Quinoidal Fluorophores

Quinoidal π-conjugated systems are sought-after materials for semiconducting applications because of their rich optical and electronic characteristics. However, the analogous fluorescent compounds are extremely rare, with just two reports in the literature. Here, we present the design and development of a third series of quinoidal fluorophores [(2,5-diarylidene)-3,6-bis(hexyloxy)-2,5-dihydropyrazine (Q1-Q5)] that incorporates p-azaquinodimethane. The fluorophores are synthesized in a two-step synthetic approach employing Knoevenagel condensation of N,N-diacetyl-piperazine-2,5-dione with different aromatic aldehydes followed by O-alkylation in high yields. Q1-Q5 are strongly emissive, and by altering the aryl-substituents, the emission colors can be modulated from blue to orange. The compounds possess emission maxima (λem) at 475-555 nm in the solution state and 510-610 nm in the solid state, with fluorescence quantum yields of up to 60%. To the best of our knowledge, the reported systems are the first quinoidal dual-state emissive (solution- and solid-state) compounds. In trifluoroacetic acid, Q5 exhibits halochromic behavior, with a dramatic color change from yellow to blue. Furthermore, the preliminary fluorescent sensing studies demonstrated that Q5 could act as a selective turn-off fluorescence probe for electron-deficient picric acid (PA), with an emission quenching of >90% in the solution state. The thin-layer chromatography (TLC) strip sensor of Q5 was also designed to detect PA in water.

Aggregation behaviour of pyrene-based luminescent materials, from molecular design and optical properties to application

Molecular aggregates are self-assembled from multiple molecules via weak intermolecular interactions, and new chemical and physical properties can emerge compared to their individual molecule. With the development of aggregate science, much research has focused on the study of the luminescence behaviour of aggregates rather than single molecules. Pyrene as a classical fluorophore has attracted great attention due to its diverse luminescence behavior depending on the solution state, molecular packing pattern as well as morphology, resulting in wide potential applications. For example, pyrene prefers to emit monomer emission in dilute solution but tends to form a dimer via π-π stacking in the aggregation state, resulting in red-shifted emission with quenched fluorescence and quantum yield. Over the past two decades, much effort has been devoted to developing novel pyrene-based fluorescent molecules and determining the luminescence mechanism for potential applications. Since the concept of "aggregation-induced emission (AIE)" was proposed by Tang et al. in 2001, aggregate science has been established, and the aggregated luminescence behaviour of pyrene-based materials has been extensively investigated. New pyrene-based emitters have been designed and synthesized not only to investigate the relationships between the molecular structure and properties and advanced applications but also to examine the effect of the aggregate morphology on their optical and electronic properties. Indeed, new aggregated pyrene-based molecules have emerged with unique properties, such as circularly polarized luminescence, excellent fluorescence and phosphorescence and electroluminescence, ultra-high mobility, etc. These properties are independent of their molecular constituents and allow for a number of cutting-edge technological applications, such as chemosensors, organic light-emitting diodes, organic field effect transistors, organic solar cells, Li-batteries, etc. Reviews published to-date have mainly concentrated on summarizing the molecular design and multi-functional applications of pyrene-based fluorophores, whereas the aggregation behaviour of pyrene-based luminescent materials has received very little attention. The majority of the multi-functional applications of pyrene molecules are not only closely related to their molecular structures, but also to the packing model they adopt in the aggregated state. In this review, we will summarize the intriguing optoelectronic properties of pyrene-based luminescent materials boosted by aggregation behaviour, and systematically establish the relationship between the molecular structure, aggregation states, and optoelectronic properties. This review will provide a new perspective for understanding the luminescence and electronic transition mechanism of pyrene-based materials and will facilitate further development of pyrene chemistry.

Rational Design of Novel Conjugated Terpolymers Based on Diketopyrrolopyrrole and Their Applications to Organic Thin-Film Transistors

Organic polymer semiconductor materials, due to their good chemical modifiability, can be easily tuned by rational molecular structure design to modulate their material properties, which, in turn, affects the device performance. Here, we designed and synthesized a series of materials based on terpolymer structures and applied them to organic thin-film transistor (OTFT) device applications. The four polymers, obtained by polymerization of three monomers relying on the Stille coupling reaction, shared comparable molecular weights, with the main structural difference being the ratio of the thiazole component to the fluorinated thiophene (Tz/FS). The conjugated polymers exhibited similar energy levels and thermal stability; however, their photochemical and crystalline properties were distinctly different, leading to significantly varied mobility behavior. Materials with a Tz/FS ratio of 50:50 showed the highest electron mobility, up to 0.69 cm2 V-1 s-1. Our investigation reveals the fundamental relationship between the structure and properties of materials and provides a basis for the design of semiconductor materials with higher carrier mobility.

Donor-Acceptor-Based Organic Polymer Semiconductor Materials to Achieve High Hole Mobility in Organic Field-Effect Transistors

Organic polymer semiconductor materials are conveniently tuned to energy levels because of their good chemically modifiable properties, thus enhancing their carrier transport capabilities. Here, we have designed and prepared a polymer with a donor-acceptor structure and tested its potential as a p-type material for organic field-effect transistor (OFET) applications using a solution-processing method. The conjugated polymers, obtained via the polymerization of the two monomers relying on the Stille coupling reaction, possess extremely high molecular weights and thermodynamic stability. Theoretical-based calculations show that PDPP-2S-Se has superior planarity, which is favorable for carrier transport within the main chain. Photophysical and electrochemical measurements systematically investigated the properties of the material and the energy levels with respect to the theoretical values. The maximum hole mobility of the PDPP-2S-Se-based OFET device is 0.59 cm2 V-1 s-1, which makes it a useful material for potential organic electronics applications.

Tetraazacoronenes and Their Dimers, Trimers and Tetramers

Tetraazacoronenes were synthesized from bay-functionalized tetraazaperylenes by Zr-mediated cyclization and four-fold Suzuki-Miyaura cross coupling. In the Zr-mediated approach, an η4 -cyclobutadiene-zirconium(IV) complex was isolated as an intermediate to cyclobutene-annulated derivatives. Using bis(pinacolatoboryl)vinyltrimethylsilane as a C2 building block gave the tetraazacoronene target compound along with the condensed azacoronene dimer as well as higher oligomers. The series of extended azacoronenes show highly resolved UV/Vis absorption bands with increased extinction coefficients for the extended aromatic cores and fluorescence quantum yields of up to 80 % at 659 nm.

Microwave-assisted C-C bond formation of diarylacetylenes and aromatic hydrocarbons on carbon beads under continuous-flow conditions

The synthesis of polycyclic aromatic compounds generally requires stoichiometric oxidants or homogeneous metal catalysts, however, the risk of contamination of inorganic residues can affect their properties. Here we present a microwave (MW)-assisted platinum on beaded activated carbon (Pt/CB)-catalyzed C-C bond formation of diarylacetylenes and aromatic hydrocarbons under continuous-flow conditions. Various fused aromatic compounds were continuously synthesized via dehydrogenative C(sp²)-C(sp²) and C(sp²)-C(sp³) bond formation with yields of up to 87% without the use of oxidants and bases. An activated, local reaction site on Pt/CB in the flow reaction channel reaching temperatures of more than three hundred degrees Celsius was generated in the catalyst cartridge by selective microwave absorption in CB with an absorption efficiency of > 90%. Mechanistic experiments of the transformation reaction indicated that a constant hydrogen gas supply was essential for activating Pt. This is an ideal reaction with minimal input energy and no waste production.

Mitochondria-targeting fluorescent sensor with high photostability and permeability for visualizing viscosity in mitochondrial malfunction, inflammation, and AD models

Viscosity changes in mitochondria are closely associated with numerous cellular processes and diseases. Currently available fluorescence probes used in mitochondrial viscosity imaging are not very photostable or sufficiently permeable. Herein, a highly photostable and permeable mitochondria-targeting red fluorescent probe (Mito-DDP) was designed and synthesized for viscosity sensing. Viscosity was imaged in living cells using a confocal laser scanning microscope, and the results suggested that Mito-DDP penetrated the membrane and stained the living cells. Importantly, practical applications of Mito-DDP were demonstrated: viscosity visualization was realized for mitochondrial malfunction, cellular and zebrafish inflammation, and Drosophila Alzheimer's disease models, i.e., for subcellular organelles, cells, and organisms. The excellent analytical and bioimaging performance of Mito-DDP in vivo makes it an effective tool for exploring the physiological and pathological effects of viscosity.

Synthesis, photoluminescence and electroluminescence properties of a new blue emitter with aggregation-induced emission and thermally activated delayed fluorescence characteristics

The emitters with aggregation-induced emission (AIE) and thermally activated delayed fluorescence (TADF) characteristics are in high demand in organic light-emitting diodes (OLEDs) owing to their strong fluorescence and high exciton utilization under electrical excitation. Herein, a blue emitter, 10-(3-((3,5-di(9H-carbazol-9-yl)phenyl)sulfonyl)phenyl)-9,9-dimethyl-9,10-dihydroacridine (m-CZ-DPS-DMAC), was synthesized by incorporating carbazole as skeleton, acridine as electron donor, and diphenyl sulfone as electron acceptor. m-CZ-DPS-DMAC emits weak fluorescence in good solvent, while it is obviously enhanced in the aggregate state, which is typical of AIE molecules. Meanwhile, the energy levels of the singlet and triplet states (ΔE_ST) of the molecule is relatively small, and it also exhibits obvious temperature dependence and oxygen sensitivity, which directly proves its TADF properties. In view of the above properties, a series of non-doped and doped OLEDs were prepared using m-CZ-DPS-DMAC as light-emitting layers. Among them, non-doped OLED (device A) displays blue emission (488 nm) with the turn-on voltage (V_on), the maximum luminance (L_max), the maximum current efficiency (CE_max), the maximum power efficiency (PE_max) and the maximum external quantum efficiency (EQE_max) of 2.6 V, 3460 cd m^-2, 26.09 cd A^-1, 29.26 lm W^-1 and 10.05%, respectively. Doped OLED (device C) constructed based on m-CZ-DPS-DMAC doped 30% in DPEPO shows the satisfactory performance with the maximum emission peak of 486 nm, the V_on of 2.8 V, the L_max of 4571 cd m^-2, the CE_max of 21.37 cd A^-1, the PE_max of 22.37 lm W^-1, and the EQE_max of 9.44%, respectively. The outstanding performance of m-CZ-DPS-DMAC proves that it is a potential material for designing blue OLEDs with AIE-TADF properties.

Molecular Engineering of Chalcogen-Embedded Anthanthrenes via peri-Selective C-H Activation: Fine-Tuning of Crystal Packing for Organic Field-Effect Transistors

Disclosed herein is a RhCl₃ -catalyzed peri-selective C-H/C-H oxidative homo-coupling of 1-substituted naphthalenes, which provides a highly efficient and streamlined approach to chalcogen-embedded anthanthrenes from readily available starting materials. Introducing O, S, and Se into the anthanthrene skeleton leads to gradually increased π-π stacking distances but significantly enhanced π-π overlaps with the growth of the hetero-atom radius. Moderate π-π distance, overlap area, and intermolecular S-S interactions endow S-embedded anthanthrene (PTT) with excellent 2D charge-transport properties. Moreover, the transformation of p-type to n-type S-embedded anthanthrenes is realized for the first time via the S-atom oxidation from PTT to PTT-O4. In organic field-effect transistor devices, PTT derivatives exhibit hole transport with mobilities up to 1.1 cm²  V^-1  s^-1 , while PTT-O4 shows electron transport with a mobility of 0.022 cm²  V^-1  s^-1 .

Ion Transport in 2D Nanostructured π-Conjugated Thieno[3,2-b]thiophene-Based Liquid Crystal

Leveraging the self-assembling behavior of liquid crystals designed for controlling ion transport is of both fundamental and technological significance. Here, we have designed and prepared a liquid crystal that contains 2,5-bis(thien-2-yl)thieno[3,2-b]thiophene (BTTT) as mesogenic core and conjugated segment and symmetric tetra(ethylene oxide) (EO4) as polar side chains for ion-conducting regions. Driven by the crystallization of the BTTT cores, BTTT/dEO4 exhibits well-ordered smectic phases below 71.5 °C as confirmed by differential scanning calorimetry, polarized optical microscopy, temperature-dependent wide-angle X-ray scattering, and grazing incidence wide-angle X-ray scattering (GIWAXS). We adopted a combination of experimental GIWAXS and molecular dynamics (MD) simulations to better understand the molecular packing of BTTT/dEO4 films, particularly when loaded with the ion-conducting salt lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Ionic conduction of BTTT/dEO4 is realized by the addition of LiTFSI, with the material able to maintain smectic phases up to r = [Li⁺]/[EO] = 0.1. The highest ionic conductivity of 8 × 10^-3 S/cm was attained at an intermedium salt concentration of r = 0.05. It was also found that ion conduction in BTTT/dEO4 is enhanced by forming a smectic layered structure with irregular interfaces between the BTTT and EO4 layers and by the lateral film expansion upon salt addition. This can be explained by the enhancement of the misalignment and configurational entropy of the side chains, which increase their local mobility and that of the solvated ions. Our molecular design thus illustrates how, beyond the favorable energetic interactions that drive the assembly of ion solvating domains, modulation of entropic effects can also be favorably harnessed to improve ion conduction.

π-Expanded Carbazoles as Hole-Selective Self-Assembled Monolayers for High-Performance Perovskite Solar Cells

Carbazole-derived self-assembled monolayers (SAMs) are promising hole-selective materials for inverted perovskite solar cells (PSCs). However, they often possess small dipoles which prohibit them from effectively modulating the workfunction of ITO substrate, limiting the PSC photovoltage. Moreover, their properties can be drastically affected by even subtle structural modifications, undermining the final PSC performance. Here, we designed two carbazole-derived SAMs, CbzPh and CbzNaph through asymmetric or helical π-expansion for improved molecular dipole moment and strengthened π-π interaction. The helical π-expanded CbzNaph has the largest dipole, forming densely packed and ordered monolayer, facilitated by the highly ordered assembly observed in its π-scaffold's single crystal. These synergistically modulate the perovskite crystallization atop and tune the ITO workfunction. Consequently, the champion PSC employing CbzNaph showed an excellent 24.1 % efficiency and improved stability.

Dithieno[3,2-b:2',3'-d]thiophene (DTT): an emerging heterocyclic building block for future organic electronic materials & functional supramolecular chemistry

Heterocyclic compounds being potent biochemical materials are ubiquitous molecules in our life. Amongst, the five membered aromatic ring systems, thiophene has emerged as a remarkable entity in organic electronics owing to its (i) high resonance energy, (ii) more electrophilic reactivity than benzene, (iii) high π-electron density, (iv) planar structure and, (v) presence of vacant d-orbital in addition to the presence of loosely bind lone-pairs of electrons on sulfur atoms. In recent past, thiophene-fused molecule namely, dithienothiophene (DTT) has attracted a tremendous attention of the researchers worldwide due to their potential applicability in organic electronics such as in solar cells, electrochromic devices (ECDs), organic field effect transistors (OFETs), organic limiting diodes (OLEDs), fluorescent probes, redox switching and so forth because of their (i) higher charge mobility, (ii) extended π-conjugation, and (iii) better tuning of band gaps, etc. In this particular review article, we envisioned to report the recent advancements made on the DTT-based architectures not only because of the potential applicability of this valuable scaffold in organic electronic but also to motivate the young researchers worldwide to look for the challenging opportunities related to this privileged building block in both material sciences and functional supramolecular chemistry.

Effect of sulfur doping of zinc-imidazole coordination polymer (ZnIm CP) as a novel photocatalyst for degradation of ionic dyes

Zinc-Imidazole coordination polymer (ZnImCP) was simply synthesized hydrothermally at relatively low temperature (70 °C) from zinc acetate and imidazole. ZnImCP was treated by sulfide solution to produce sulfur-doped samples (S-ZnImCPs). Structures of the synthesized ZnImCP and S-ZnImCPs were characterized through FTIR, PXRD, and, Raman, SEM/EDX, N2-BET, UV–VIS DRS, and pHpzc analyses. The photocatalytic performances of pristine CP and sulfur modified CPs under visible and ultra-violet irradiations for degrading the cationic methylene blue (MB) and the anionic methyl orange (MO) were investigated considering different initial pH values 4, 7 and 10. Under visible light, the results indicate that these CPs display considerable photocatalytic degradation towards the cationic MB for the initial pH 4 and 7 where degradation increases with sulfur content. While under ultra-violet, results indicate considerable photocatalytic degradation towards both dyes for the initial pH 7 and 10 where degradation increases with sulfur content which indicates the gainful of non-metal dopping. The buffering nature of CPs and the type of radiation considering determined band-gap values effectively influence the degradation mechanisms.

Solution Processed Photodetectors with PVK-WS2 Nanotube/Nanofullerene Organic-Inorganic Hybrid Films

Organic-inorganic hybrid photodetectors have attracted increased interest due to their exceptional properties, such as flexibility, transparency, and low cost for many promising applications. Low-dimensional tungsten disulfide (WS₂) nanostructures have outstanding electrical and optical properties, making them ideal candidates for ultrasensitive photodetector devices. In this paper, photodetectors were fabricated with hybrid thin films containing two different WS₂ nanomaterials, one-dimensional (1D) WS₂ nanotubes (WS₂-NTs) and a zero-dimensional (0D) WS₂ nanofullerene (WS₂-FLs) hybrid with poly(N-vinyl carbazole) (PVK). The electrical responses of the devices under visible-light illuminations were studied. The photodetector devices with 0D WS₂-FLs/PVK hybrid thin films have relatively higher sensitivity and stable voltage responses to visible light. Besides, the hybrid film shows a strong surface-enhanced Raman effect (SERS). These materials and new strategies enable the creation of a new class of processed photodetectors for practical applications.

Aggregation Modes of Chiral Diketopyrrolo[3,4-c]pyrrole Dyes in Solution and Thin Films

The chiroptical features of chiral diketopyrrolo[3,4-c]pyrrole (DPP) derivatives have been only marginally investigated to date. In this regard, we have synthesized ad hoc four chiral DPP dyes, functionalized with enantiopure alkyl groups from natural sources either on the lactam moieties or on the terminal positions of the π-conjugated backbone, to promote an efficient self-assembly into chiral supramolecular structures. For each of them, the aggregation modes has been investigated by absorbance and ECD spectroscopies in conditions of solution aggregation and on thin films, considering the effects of deposition technique (drop casting vs. spin coating) and post-deposition operations (solvent and thermal annealing). The effect of the structure of lateral π-conjugated units attached to the central DPP scaffold, as well as that of the position of the alkyl chiral group, has been assessed. ECD revealed superior capability, compared to absorbance spectroscopy, to provide information on the aggregation modes and to detect the possible co-existence of multiple aggregation pathways.

On the interface between biomaterials and two-dimensional materials for biomedical applications

Two-dimensional (2D) materials have garnered significant attention due to their ultrathin 2D structures with a high degree of anisotropy and functionality. Reliable manipulation of interfaces between 2D materials and biomaterials is a new frontier for biomedical nanoscience and combining biomaterials with 2D materials offers a promising way to fabricate innovative 2D biomaterials composites with distinct functionality for biomedical applications. Here, we focus exclusively on a summary of the current work in the interface investigation of 2D biomaterials. Specifically, we highlight extraordinary features that make 2D materials so desirable, as well as the molecular level interactions between 2D materials and biomaterials that have been studied thus far. Furthermore, the approaches for investigating the interface characteristics of 2D biomaterials are presented and described in depth. To capture the emerging trend in mass manufacturing of 2D materials, we review the research progress on biomaterial-assisted exfoliation. Finally, we present a critical assessment of newly developed 2D biomaterials in biomedical applications.

Development of Synthesis and Application of High Molecular Weight Poly(Methyl Methacrylate)

Poly(methyl methacrylate) (PMMA) is widely used in aviation, architecture, medical treatment, optical instruments and other fields because of its good transparency, chemical stability and electrical insulation. However, the application of PMMA largely depends on its physical properties. Mechanical properties such as tensile strength, fracture surface energy, shear modulus and Young’s modulus are increased with the increase in molecular weight. Consequently, it is of great significance to synthesize high molecular weight PMMA. In this article, we review the application of conventional free radical polymerization, atom transfer radical polymerization (ATRP) and coordination polymerization for preparing high molecular weight PMMA. The mechanisms of these polymerizations are discussed. In addition, applications of PMMA are also summarized.

Orienting dilute thin films of non-planar spin-1/2 vanadyl-phthalocyanine complexes

The molecular orientation as well as the electronic and magnetic properties of vanadyl-phthalocyanine (VOPc) diluted into titanyl-phthalocyanine (TiOPc) thin films on Si(100) and polycrystalline aluminum substrates have been investigated by soft X-ray absorption spectroscopy (XAS), X-ray linear dichroism (XLD) and X-ray magnetic circular dichroism (XMCD). On the bare substrates the films grow with a standing-up geometry. By contrast, on template layers of 3,4,9,10-perylene-tetracarboxylic dianhydride (PTCDA), they assume a lying-down orientation. Moreover, a theoretical model based on the normalized intensity of the nitrogen K-edge XLD is established in order to extract the molecular orientation angle quantitatively without the need for crystallinity and with the sub-monolayer sensitivity of soft-XAS. XMCD reveals that the vanadium magnetic properties are preserved in both non-diluted and diluted films. The results pave the way toward the use of VOPc as nanometer-sized spin quantum bits.

Achieving Balanced Electrical Performance of Host Material through Dual N-P═O Resonance Linkage for Efficient Electroluminescence

Developing high-performance host materials is one of the biggest challenges for blue and white thermally activated delayed-fluorescence (TADF) organic light-emitting diode (OLED) technology due to the rigorous requirements of both efficient carrier flux ability and high triplet energy (E_T) levels in static donor-acceptor molecules. Here, with the aid of a dual-resonance strategy, a host molecule showing dynamic adaption features in the acceptor-resonance-donor-resonance-acceptor (A-r-D-r-A) molecular configuration has been successfully developed through the implantation of two acceptors of diphenylphosphine oxide into electron-donating 5,10-dihydrophenazine with N-P═O resonance linkages. Owing to the dual enantiotropic N⁺═P-O^- resonances, the designed A-r-D-r-A molecule exhibits an extraordinarily balanced charge flux transportation attribute at high E_T (2.96 eV). Excitingly, blue and warm-white TADF OLEDs hosted by the A-r-D-r-A molecule exhibit outstanding external quantum efficiencies of 14.7 and 20.3%, respectively. Our studies not only broaden the scope of resonance molecules but also indicate that a resonance structure is an effective linkage to develop optoelectronic materials with dynamically adaptive properties.

Tuning the Electronic Properties of Main-Group Species by N-Heterocyclic Vinyl (NHV) Scaffolds

ConspectusMolecules and materials with easily tunable electronic structures and properties are at the forefront of contemporary research. π-Conjugation is fundamental in organic chemistry and plays a key role in the design of molecular materials. In this Account, we showcase the applicability of N-heterocyclic vinyl (NHV) substituents based on classical N-heterocyclic carbenes (NHCs) for tuning the structure, properties, and stability of main-group species (E) via π-conjugation and/or π-donation.NHVs such as [(NHC)═CR] (R = H or aryl) are monoanionic ligands formally derived by the deprotonation of N-heterocyclic olefins (NHOs), (NHC)═CHR. Further deprotonation of [(NHC)═CR] (R = H) is viable, giving rise to N-heterocyclic vinylidene (NHVD) species such as (NHC)═C. NHVs and NHVDs feature a highly polarizable exocyclic C_NHC═C bond because of the presence of adjacent π-donor nitrogen atoms. The nature of the NHC, in particular the π-acceptor property, has a direct consequence on the polarity of the C_NHC═C bond and hence on the magnitude of π-conjugation in the derived molecules. Thus, the electronic structure, especially the energy and shape of frontier molecular orbitals, HOMO and LUMO, of derived species can be fine-tuned by a judicious choice of the carbene unit. For instance, the HOMO of classical diphosphenes (RP═PR) (R = alkyl or aryl) is invariably the phosphorus lone-pair orbital, while the P═P π-bond is HOMO - 1 or HOMO - 2. In strong contrast, the HOMO of divinyldiphosphenes (R = NHV) is mainly the P═P π-bond. This is owing to the π-conjugation, resulting in the lowering of the LUMO and raising of the HOMO energy. They have a remarkably small HOMO-LUMO energy gap (4.15-4.50 eV) and readily undergo 1e-oxidations, giving rise to stable radical cations and dications.By employing a similar approach, one can access divinyldiarsenes and the corresponding radical cations and dications as crystalline solids. The use of divinyldiphosphenes and divinyldiarsenes as promising ligands in the stabilization of metalloradicals has been shown. By a logical selection of singlet carbenes, stable 2-phosha-1,3-butadiene and 2-arsa-1,3-butadiene compounds, as well as related radical cations and dications, can be prepared as crystalline solids.The relevance of NHV ligands as potent π-donors has been demonstrated for the stabilization of elusive electrophilic phosphinidene and arsinidene complexes {(NHV)E}Fe(CO)₄ (E = P or As). Moreover, stable singlet diradicaloid [(NHC)CP]₂ and p-quinodimethane derivatives [(NHC)CP₂]₂ based on an NHVD framework are accessible as stable solids.In this Account, a special emphasis is given to the contributions from this laboratory. The author hopes that this Account will serve as a useful reference guide for researchers interested in studying and applying NHV and NHVD scaffolds in modern molecular chemistry and materials sciences.

One-step synthesis of indolizino[3,4,5-ab]isoindoles by manganese(I)-catalyzed C-H activation: structural studies and photophysical properties

Herein, a regioselective synthesis of indolizino[3,4,5-ab]isoindoles, a valuable class of heterocycles with interesting luminescence properties, is described using manganese(I)-catalyzed C-H activation. The reported transformation proceeds in one-step and employs readily available 2-phenylpyridines as starting materials. Furthermore, the obtained single products exhibit blue-greenish fluorescence with high quantum yields.

Conductive metal and covalent organic frameworks for electrocatalysis: design principles, recent progress and perspective

Metal and covalent organic frameworks (MOFs/COFs) are emerging promising candidates in the field of catalysts due to their porous nature, chemically well-defined active sites and structural diversity. However, they are typically provided with poor electrical conductivity, which is insufficient for them to work as satisfying electrocatalysts. Designing and fabricating MOFs/COFs with high conductivity presents a new avenue towards special electrochemical reactions. This minireview firstly highlighted the origin and design principles of conductive MOFs/COFs for electrocatalysis on the basis of typical charge transfer mechanisms, that is "through space", "extended conjugation" and "through bond". An overview of conductive MOFs/COFs used in the electrocatalytic carbon dioxide reduction reaction (CO₂RR), water splitting and the oxygen reduction reaction (ORR) was then made to track the very recent progress. In the final remarks, the present challenges and perspectives for the use of conductive MOFs/COFs as electrocatalysts including their structural optimization, feasible applications and structure-activity correlation are proposed.

Synthesis and characterization of naphthalene derivatives for two-component heterojunction-based ambipolar field-effect transistors complemented with copper hexadecafluorophthalocyanine (F16CuPc)

Ambipolar OFET performance was obtained by adjusting two-component bilayer devices based on new naphthalene derivatives and F16CuPc.

Computational studies on nitrogen (N)-substituted 2,6-diphenylanthracene: a novel precursor of organic field effect transistor materials

The investigation shows that nitrogen (N)-substituted π-conjugated semiconductor materials have improved optical and electronic performance and work efficiently in organic field-effect transistors (OFETs).

Polycyclic Arenes Dihydrodinaphthopentacene-based Hole-Transporting Materials for Perovskite Solar Cells Application

In this paper, two D-π-D type compounds, C1 and C2, containing dihydrodinaphthopentacene (DHDNP) as a π-bridge, p-methoxydiphenylamine and p-methoxytriphenylamine groups as the donor groups were synthesized. The four 4-hexylphenyl groups at the sp³ -carbon bridges of DHDNP were acquainted with control morphology and improving solubility. The light absorption, energy level, thermal properties, and application as hole-transporting materials in perovskite solar cells of these compounds were fully investigated. The HOMO/LUMO levels and energy gaps of these DHDNP-based molecules are suitable for use as hole-transporting materials in PSCs. The best power conversion efficiencies of the PVSCs based on the C1 and C2 are 15.96% and 12.86%, respectively. The performance of C1 is comparable to that of the reference compound spiro-OMeTAD (16.38%). Compared with spiro-OMeTAD, the C1-based PVSC device showed good stability, which was slightly decreased to 98.68% of its initial efficiency after 48 h and retained 81% of its original PCE after 334 h without encapsulation. These results reveal the potential usefulness of the DHDNP building block for further development of economical and highly efficient HTMs for PVSCs.

Copper-mediated construction of benzothieno[3,2-b]benzofurans by intramolecular dehydrogenative C-O coupling reaction

An efficient method to synthesize benzothieno[3,2-b]benzofurans via intramolecular dehydrogenative C-H/O-H coupling has been developed. Good to excellent yields (64-91%) could be obtained no matter if the substituted group is electron-donating or electron-withdrawing. Notably, three-to-six fused ring thienofuran compounds could be constructed using this method. A reaction mechanism study showed that 1,1-diphenylethylene can completely inhibit the reaction. Therefore, it is a radical pathway initiated by single electron transfer between the hydroxyl of the substrate and the copper catalyst.

Unconventional Thermoelectric Materials for Energy Harvesting and Sensing Applications

Heat is an abundant but often wasted source of energy. Thus, harvesting just a portion of this tremendous amount of energy holds significant promise for a more sustainable society. While traditional solid-state inorganic semiconductors have dominated the research stage on thermal-to-electrical energy conversion, carbon-based semiconductors have recently attracted a great deal of attention as potential thermoelectric materials for low-temperature energy harvesting, primarily driven by the high abundance of their atomic elements, ease of processing/manufacturing, and intrinsically low thermal conductivity. This quest for new materials has resulted in the discovery of several new kinds of thermoelectric materials and concepts capable of converting a heat flux into an electrical current by means of various types of particles transporting the electric charge: (i) electrons, (ii) ions, and (iii) redox molecules. This has contributed to expanding the applications envisaged for thermoelectric materials far beyond simple conversion of heat into electricity. This is the motivation behind this review. This work is divided in three sections. In the first section, we present the basic principle of the thermoelectric effects when the particles transporting the electric charge are electrons, ions, and redox molecules and describe the conceptual differences between the three thermodiffusion phenomena. In the second section, we review the efforts made on developing devices exploiting these three effects and give a thorough understanding of what limits their performance. In the third section, we review the state-of-the-art thermoelectric materials investigated so far and provide a comprehensive understanding of what limits charge and energy transport in each of these classes of materials.