Fluorescent probe for detection of fluoride in water and bioimaging in A549 human lung carcinoma cells

Evaluation of Fluorescence-Based Screening Assays for the Detection and Quantification of Silyl Hydrolase Activity

This study reports the development of fluorometric assays for the detection and quantification of silyl hydrolase activity using silicatein as a model enzyme. These assays employed a series of organosilane substrates containing either mycophenolate or umbelliferone moieties, which become fluorescent upon hydrolysis of a scissile Si-O bond. Among these substrates, the mycophenolate-derived molecule MycoF, emerged as the most promising candidate due to its relative stability in aqueous media, which resulted in good differentiation between the enzyme-catalyzed and uncatalyzed background hydrolysis. The utility of MycoF was also demonstrated in the detection of enzyme activity in cell lysates and was found to be capable of qualitative identification of positive "hit" candidates in a high-throughput format. These fluorogenic substrates were also suitable for use in quantitative kinetic assays, as demonstrated by the acquisition of their Michaelis-Menten parameters.

Alginate-modified surfactants functionalized metal-organic framework-based fluorescent film sensors for detection and adsorption of volatile aldehydes in water

Volatile aldehydes have an adverse impact on both human health and the environment, therefore, a fast, straightforward, highly accurate detection technique for the simultaneous detection and removal of several aldehydes is eagerly anticipated. Herein, novel APGF@ZIF-8 and APOF@ZIF-8 sensing materials were developed by coating fluorescent alginate-modified surfactants (APGF and APOF) into the ZIF-8 MOFs to produce quite porous fluorescent sensors (SBET up to 1519 m2/g). The detection capacity of the prepared sensors for benzaldehyde, glyoxal, formaldehyde, and acetaldehyde has been examined. The detection mechanism was suggested as hydrogen bonding formation between the sensors and volatile aldehydes as confirmed by Gaussian calculations. All the fluorescence spectra of aldehydes display remarkable linear detection relationships in the range of 0.05-200 μM with the limits of detection (LOD) values in the range of 0.001-0.18 μM (0.106-10.44 ppb). These sensors were utilized successfully to detect multiple volatile aldehydes in river water samples with satisfactory recoveries of 96-107 %. Interestingly, fluorescent APGF@ZIF-8/CS and APOF@ZIF-8/CS films as portable disposable removal techniques for benzaldehyde, glyoxal, formaldehyde, and acetaldehyde from water were fabricated. APOF@ZIF-8/CS exhibited an excellent formaldehyde adsorption capacity of 58.30 mg/g and an adsorption removal efficiency of 93.5 %. The adsorption process of biosorbent on various aldehydes was fitted by Freundlich adsorption isotherm. The adsorption kinetics followed Pseudo-second-order kinetic model.

13-8-13-Membered Tricyclic Ladder-Type Siloxanes Hybridized with BINOLs: Synthesis, Characterization, and Fluorescence Sensing of Fluorides

Developing fluorescent chemosensors with sensitivity and high specificity for recognizing fluorides is still challenging. Herein, four innovative compounds based on 13-8-13-membered tricyclic ladder-type siloxanes hybridized with BINOLs (abbreviated as TLS-BINOLs) were prepared through the B(C6F5)3-catalyzed Piers-Rubinsztajn reaction. The well-defined ladder-type structure of the TLS-BINOLs was determined by X-ray crystallographic analysis. Additionally, the fluorescent sensing ability of the TLS-BINOLs toward anions was studied. Our finding revealed that all four ladder-type compounds (TLS-BINOLs) exhibited high specificity in recognizing fluorides through fluoride-triggered structural decomposition. The detection limits for fluorides were determined to be 0.37, 0.35, 0.39, and 0.48 μM for the respective TLS-BINOLs. The nonemissive product induced by the fluorides was also determined using single-crystal X-ray diffraction analysis.

Ultra-trace detection and efficient adsorption removal of multiple water-soluble volatile organic compounds by fluorescent sensor array

Due to the extremely low concentration, complex composition and easy to be converted into each other in water and air of water-soluble volatile organic compounds (VOCs), it is a great challenge to the traditional detection technology, pollution control and traceability, etc. Therefore, developing a convenient, swift and on-site detection method for simultaneous quantification of multiple VOCs is highly anticipated. In this paper, a multifunctional sensor array with adsorption and sensing of VOCs has been constructed by four fluorescence channels of small-sized Eu@Uio-66 and Tb@Uio-66. Due to the obvious cross-reactive characteristics between 4 fluorescence channels and VOCs, the sensor array could detect 8 VOCs simultaneously with all detection limits as low as ppb level. In addition, the detection results of sensor array for actual water samples coexisting with multiple VOCs confirmed that it has strong anti-interference performance and could be used for simultaneous detection of multiple VOCs in real water. The construction of sensor array with VOC adsorption function not only helps to reduce the detection limit of VOCs benefiting from the pre-concentration of materials, but also has significant value to reduce the harmfulness of pollutants. Predictably, this work is of great significance for VOC traceability, analysis of ecotoxicological effects and monitoring of pollution distribution characteristics.

New method for morphological identification and simultaneous quantification of multiple tetracyclines by a white fluorescent probe

The threat of tetracycline antibiotics to the environment and human health is attracting widespread attention. The development of morphological analysis and quantitative techniques of multiple tetracyclines is of great significance for the evaluation of biochemical toxicity, wide-spectrum antibacterial property and degradation cycle between different tetracyclines. In this study, the white fluorescent Eu/Tb@CDs was synthesized and applied successfully to the identification and detection of the most widely used tetracycline antibiotics (tetracycline (TC), oxytetracycline (OC), chlortetracycline (CC) and doxycycline (DC)) with detection limits all below 1 nM. For the actual water samples with coexistence of the above 4 tetracyclines, their simultaneous morphology identification and accurate quantitative detection can also be realized through simple spectrometric measurement. In addition, the selective and competitive experiments have been carried out on the pollutants widely present in water, and the results have also confirmed that other pollutants could not interfere with the detection of the above 4 tetracyclines. It is undeniable that this work will conveniently and visually reveal the existence information and geographical distribution characteristics of different tetracycline antibiotics in the environment and their action mechanism on organisms.

Turn-on fluorescent capsule for selective fluoride detection and water purification

It has been a long-standing challenge to develop organic molecular capsules for selective anion binding in water. Here, selective recognition of aqueous fluoride was achieved through triple protonation of a hemicryptophane (L), which is composed of a fluorescent cyclotriveratrylene (CTV) cap and tris(2-aminoethyl)amine (tren) as the anion binding site. Fluoride encapsulation by [3H-L]³⁺ was evidenced by ¹H NMR, ¹⁹F NMR, LC-MS, and X-ray crystallography. In addition, [3H-L]³⁺ exhibited a 'turn-on' fluorescence signal (λ _em = 324 nm) upon fluoride addition. An apparent association constant K _A = (7.5 ± 0.4) × 10⁴ M^-1 and a detection limit of 570 nM fluoride were extracted from the fluorescence titration experiments in citrate buffer at pH 4.1. To the best of our knowledge, [3H-L]³⁺ is the first example of a metal-free molecular capsule that reports on fluoride binding in purely aqueous solutions with a fluorescence response. Finally, the protonated capsule was supported on silica gel, which enabled adsorptive removal of stoichiometric fluoride from water and highlights real-world applications of this organic host-guest chemistry.

The sensing mechanism of a flavone-based ESIPT fluorescent chemodosimeter for selective recognition towards fluoride: a theoretical

The sensing mechanism of 3-hydroxyflavone-based (3-HF) fluorescent chemodosimeter 3-triisopropylsilylflavone (3-TPSF) for detecting fluoride (F-) has been theoretically investigated. The calculated Laplacian bond order confirms that the Si-O bond of 3-TPSF is the reaction site of F-. The free energy barrier of 18.33 kcal mol-1 indicates that F-triggered desilylation reaction can occur and then form the anionic state of 3-HF (3-HF-) with a fluorescence peak at 545 nm. 3-HF- captures H+ of the mixed aqueous medium to be transformed into 3-HF with an intramolecular hydrogen bond (O1-H⋯O2). The energy barrier of 1.86 kcal mol-1 in the S1 state obtained from the constructed potential energy curves confirms that the excited state intramolecular proton transfer (ESIPT) in 3-HF occurs to form a tautomer structure, which produces a long-wavelength emission of 549 nm. The fluorescence emitted from both 3-HF- and 3-HF agrees with the experimental value of 530 nm appearing after adding F-. Charge transfer analyses indicate that the extent of intramolecular charge transfer in 3-HF- is more intense than that of 3-TPSF, which induces a large Stokes shift of 180 nm. Therefore, the sensing mechanism is attributed to the combination of a large charge transfer feature and ESIPT that are caused by desilylation reaction. The significant fluorescence change makes 3-TPSF a chemodosimeter for detecting F-.

DFT/TD-DFT study to decipher the fluoride induced ring opening process of spiropyran

DFT/TD-DFT methods were used to determine the fluoride anion sensing mechanism of 3',6'-Bis(tert-butyldimethylsilyloxy)spiro[benzo[f]chromene3,9'ffuorene], abbreviated as SP. The description of ring opening in the ground state of SP molecule and its isomerization in open form is presented. It was revealed from the study that in the ground state, SP is the most stable form in contrast with the isomer obtained in the open form. To initiate the ring opening, at first, the fluoride ion attacks as a nucleophile to de-silylate the SP molecule. This attack of fluoride ion may induce Cspiro-O bond cleavage leading to the formation of two anionic species, i.e., MC-D1 and MC-D2 respectively (MC is merocyanin). The mono-de-silylation process was endogenic, which was followed by the ring opening process. Furthermore, the orthogonal geometry of probe SP does not show ICT character, whereas, MC-D1 and MC-D2 displayed ICT character owing to the formation of planar geometry along with an increase in conjugation. The fluorescence property of SP, and most stable isomers of open form (CT, MC-D1, and MC-D2) were predicted theoretically. The calculated emission spectra uncovered that SP may show fluorescence, which could be quenched in presence of fluoride anion.

Exogenous transforming growth factor-β1 prevents the inflow of fluoride to ameleoblasts through regulation of voltage-gated chloride channels 5 and 7

Dental fluorosis is a global issue. Although there are multiple causes of dental fluorosis, the precise mechanism remains controversial. Previous studies have demonstrated that extracellular fluoride may promote an accumulation of fluoride ions in ameloblasts, which may induce oxidative and endoplasmic reticulum stresses, leading to dental fluorosis. However, the exact process by which fluoride ions enter cells has not been determined. In the present study, intracellular fluoride concentration was determined using a newly developed specific fluorescent probe called probe 1. Under high extracellular fluoride concentrations, the fluorescence intensity of the ameloblasts increased, however, exogenous transforming growth factor-β1 (TGF-β1) was able to inhibit the increase. Furthermore, changes in the expression of the voltage-gated chloride channels 5 and 7 (ClC5 and ClC-7), which are responsible for the transport of fluoride were investigated. The results indicated that fluoride reduced the expression of endogenous TGF-β1 and increased the expression of ClC-5 and ClC-7. Additionally, exogenous TGF-β1 reduced the expression of ClC-5 and ClC-7. The results of the present study indicate that exogenous TGF-β1 may prevent accumulation of fluoride in ameloblasts through the regulation of ClC-5 and ClC-7 under high extracellular fluoride concentrations.

Lowest aqueous picomolar fluoride ions and in vivo aluminum toxicity detection by an aluminum(iii) binding chemosensor

Aluminum toxicity in biological systems is a well-known issue yet remains as a prevalent and unsolvable problem due to the lack of proper molecular tools that can detect free aluminum(iii) or Al(iii) ions in vivo. Herein, we report a water-soluble photo-induced electron transfer (PET)-based turn-ON/OFF fluorometric chemosensor for the dual detection of Al(iii) and fluoride ions in aqueous media with a nanomolar (∼1.7 × 10^-9 M) and picomolar (∼2 × 10^-12 M, lowest ever detection so far) detection limit, respectively. Fluoride ions in sea water could be detected as well as the recognition of non-contamination in drinking water. In addition, using live-cell microscopy, Al(iii) ions were detected in live biological samples in vivo to aid establishing the aluminum-toxicity effect.

Coumarin functionalized molecular scaffolds for the effectual detection of hazardous fluoride and cyanide

Fluoride and cyanide contamination in drinking water imposes detrimental impacts on human health above their permissible limits. Hence, the quantitative detection of these colourless water-soluble toxins has attracted attention. Even though a plethora of chemosensors have been reported so far for the detection of fluoride and cyanide from various matrices, still their applicability is limited to a few examples. Nevertheless, recent advances in the syntheses of coumarin derivatives have shown significant impact on fluoride and cyanide detection. Therefore, this present review provides a brief overview of the application of coumarin-coupled molecular scaffolds towards the detection of perilous fluoride and cyanide along with their sensing mechanisms in order to develop more innovative, simple, sensitive, real-time responsive and cost-effective coumarin-based supramolecular chemosensors to promote next generation approaches towards the ultra-trace quantitative detection of these toxic anions.

Ratiometric sensing of fluoride ions using Raman spectroscopy

Ratiometric Raman spectroscopy represents a novel sensing approach for the detection of fluoride anions based on alkyne desilylation chemistry. This method enables rapid, anion selective and highly sensitive detection of fluoride in a simple paper-based assay format using a portable Raman spectrometer.

Ultrasensitive, rapid and selective sensing of hazardous fluoride ion in aqueous solution using a zirconium porphyrinic luminescent metal-organic framework

The development of a rapid and sensitive method for the detection of fluoride ion (F^-) in aqueous systems is of great significance for human health and environmental monitoring. In this study, a zirconium porphyrinic luminescent metal-organic framework (LMOF), PCN-222, was employed as a novel fluorescent probe for the ultrasensitive, rapid and selective detection of F^- in water. The PCN-222 probe was prepared by a facile solvothermal method. It exhibited good fluorescence stability and was highly stable in water. The fluorescence emission of PCN-222 could be effectively and selectively quenched by F^- due to the strong coordination affinity of F^- to the zirconium clusters in PCN-222. The proposed fluorescence method for F^- detection based on PCN-222 probe afforded a linear response range of 1-20 μmol/L and a very low detection limit (0.048-0.065 μmol/L) in reference to many reported F^- fluorescent probes. Moreover, a rapid response time (<10 s) was obtained due to the open and uniform pore structure of PCN-222 that allowed the fast diffusion of F^- to interact with the zirconium recognition sites. Finally, the PCN-222 probe was successfully applied for the fluorescence detection of F^- in real water samples. These results highlight the great application potential of LMOF in the sensing fields.

Depolymerization-Induced Electrochemiluminescence of Insoluble Porphyrin in Aqueous Phase

Exploring efficient and robust electrochemiluminescence (ECL) performance of liposoluble porphyrins in aqueous phase for analytical purposes especially for important biological targets is still very challenging. In this work, a novel depolymerization-induced electrochemiluminescence (DIECL) of porphyrin and β-cyclodextrin (β-CD) self-assembly through a coreactant route was discovered. Among the studied meso-tetrasubstituted porphyrins, self-assembly of 5,10,15,20-tetrakis(4-hydroxyphenyl) porphyrin (THPP) and β-CD (THPP@β-CD) exhibits the best DIECL behavior with high efficiency (21.8%) as well as good reproducibility and stability. A mechanistic study suggests that the facile complexation of porphyrins with amphiphilic β-CD via hydrogen bonding interaction greatly improves the water insolubility and the aggregation-caused deficient ECL of liposoluble porphyrins in aqueous solution. Furthermore, because of the strong hydrogen bonding between the hydroxyl groups on THPP@β-CD and a highly electronegative substrate, such THPP@β-CD is found to serve as an efficient luminophore for recognition of most electronegative fluoride (F^-) in the aqueous phase with high sensitivity and selectivity, together with a low limit of detection (0.74 μΜ). The simplicity of this THPP@β-CD and its unique DIECL property in current work provides a new guide for the ECL applications of liposoluble porphyrins in aqueous phase.

An efficient ICT-based ratio/colorimetric tripodal azobenzene probe for the recognition/discrimination of F-, AcO- and H2PO4- anions

The tripodal probe L was readily prepared via introducing rhodamine and azobenzene groups in a two-step procedure. Studies of the recognition properties indicated that probe L exhibited high sensitivity and selectivity towards F^-, AcO^- and H₂PO₄^- through a ratiometric colorimetric response with low detection limits of the order of 10^-7 M. The complexation behaviour was fully investigated by spectral titration, ¹H NMR spectroscopic titration and mass spectrometry. Probe L not only recognizes F^-, AcO^- and H₂PO₄^-, but can also distinguish between these three anions via the different ratiometric behaviour in their UV-vis spectra (387/505 nm for L-H₂PO₄^-, 387/530 nm for L-AcO^- and 387/575 nm for L-F^- complex) or via different colour changes (light coral for L-H₂PO₄^-, light pink for L-AcO^- and violet for the L-F^- complex). Additionally, given the presence of NH and OH groups in probe L, which can be protonated and deprotonated, probe L further exhibited an excellent pH response over a wide pH range (pH 3 to pH 12).

Highly Sensitive Ratiometric Fluorescent Paper Sensors for the Detection of Fluoride Ions

Two sensitive and ratiometric fluorescent probes (probe I and probe II) were developed for the detection of fluoride ions. Probe I can detect fluoride ions quantitatively within a range of 0-6 μM and a detection limit of 73 nM, while probe II has a range of 0-40 μM and a detection limit of 138 nM. The test strips from probe I are quickly able to recognize F- (5 min) inside of the F- safety level in drinking water (1.0 mg/L, ∼5 μM) under 254 nm ultraviolet light, and the test strips from probe II quickly recognize F- (12 min) in dangerously high F- levels in water (4.0 mg/L, ∼21 μM) under 254 nm ultraviolet light. This combination of fluorescent paper sensors from probe I and probe II can be used as a simple and convenient tool to determine whether water is safe to drink or dangerous.

Simple Tyrosine Derivatives Act as Low Molecular Weight Organogelators

The gelation of L-Tyr(tBu)-OH in tetrahydrofuran (THF) was discovered serendipitously. It was noted that this tremendously low molecular weight (LMW) compound has the ability to gel a wide variety of organic solvents (e.g., N,N-Dimetylformamide (DMF), THF, butanol, toluene), even in very low concentrations (i.e., 0.1 wt/v% in DMF). Addition of bases such as NaOH and piperidine enhanced the gel property. By changing the side-chain protecting group to tert-butyldimethylsilyl (TBDMS), a fluoride ion-responsive organogel was also acquired. This new organogelator responded fluoride ion concentration as low as 0.2 ppm. Characterization of microstructures and gel behaviours were studied by powder X-Ray diffraction spectroscopy (XRD), transmission electron microscopy (TEM), rheological measurements and molecular dynamics (MD) simulations. Experimental observations and theoretical simulations consistently show a fibre-like structure of the gel, in which the organogelator molecules are held together via a dense network of hydrogen bonds, and via van der Waals interactions between hydrophobic groups.

Förster Resonance Energy-Transfer-Based Ratiometric Fluorescent Indicator for Quantifying Fluoride Ion in Water and Toothpaste

A Förster resonance energy-transfer (FRET)-based ratiometric fluorescent indicator Cou-FITC-Si toward fluoride ion has been designed and synthesized by combining coumarin unit and fluorescein derivative as energy donor and acceptor, respectively. The fluorescein unit is capped with tert-butyldiphenylchlorosilane. The indicator gives out emission responses based on switch-on of the FRET process that triggered by the desilylation mediated by the fluoride ion. The fluorescence emission spectrum of Cou-FITC-Si presents a significant bathochromic shift of 59 nm after the addition of fluoride ion with up to 180-fold increase of the fluorescence intensity ratio. The limit of detection of the Cou-FITC-Si indicator system toward fluoride ion was estimated to be 3.3 ppb. Furthermore, this indicator has been successfully applied for quantifying the fluoride ion of different concentrations from commercially available toothpaste.

A targetable fluorescent probe for real-time monitoring of fluoride ions in mitochondria

Fluorion are pivotal anions in biology because they play an important role in dental care, treating osteoporosis, preventing tooth decay and promoting the healthy growth of bone. Studies have shown that high levels of fluoride will lead to the inactivation of the mitochondria. Therefore, it is urgent to develop a method to detect the fluoride anions in the mitochondria. Herein, we have developed a novel mitochondrial-target fluorescent probe for detecting F^- in living cells. The probe exhibited excellent sensitivity and high selectivity for F^- over the other relative species. With changing fluoride ions, the fluorescence spectrum of the probe changed significantly with a large turn-on fluorescence signal. Cell imaging indicated that the probe can penetrate viable cell membranes and rapidly detects and images fluorion over other anions in the mitochondria.

In Vivo Fluoride Ion Detection and Imaging in Mice Using a Designed Near-Infrared Ratiometric Fluorescent Probe Based on IR-780

A ratiometric near-infrared fluorescence probe based on IR-780 is developed and applied to fluoride anion (F^-) detection in potable water and white flour as well as fluorescence imaging in living cells and mice. The proposed probe not only displays a linear ratiometric (F₇₄₀/F₆₉₀ nm) fluorescence response but also possesses near-infrared wavelengths to F^- with a detection limit of 0.2 μM. Moreover, the designed probe displays high selectivity toward F^-, which makes it feasible for F^- detection in potable water and white flour. More importantly, applied to monitor F^- in living HepG2 cells and male BALB/c mice, the probe indicates good biocompatibility and low cytotoxicity. However, no study for F^- detection has been reported by a ratiometric NIR fluorescent probe so far. We expect that this probe with superior properties has great potential for use in F^- detection in biological systems and in vivo studies.

Fluorescent probes for detecting cysteine

Cysteine plays a crucial role in physiological processes. Therefore, it is necessary to develop a method for detecting cysteine. Fluorimetry has the advantages of convenient detection, short response time, high sensitivity and good selectivity. In this review, fluorescent probes that detect cysteine over the past three years are summarized based on structural features of fluorophores such as coumarin, BODIPY, rhodamine, fluorescein, CDs, QDs, etc and reaction groups including acrylate, aldehyde, halogen, 7-nitrobenzofurazan, etc. Then, effects of different combinations between fluorophores and response groups on probe properties and detection performances are discussed.

Coumarin Probe for Selective Detection of Fluoride Ions in Aqueous Solution and Its Bioimaging in Live Cells

We have synthesized novel coumarin-based fluorescent chemosensors for detection of fluoride ions in aqueous solution. The detection mechanism relied on a fluoride-mediated desilylation triggering fluorogenic reaction and a strong interaction between fluoride and the silicon center. In this work, the hydroxyl-decorated coumarins containing oxysilyl moiety have been synthesized through the aldehyde-functionalized coumarins. The optical responses toward fluoride, as well as aqueous stability studies of both aldehyde and hydroxyl functionalized coumarins, have been investigated. Due to the highest fluorescence enhancement upon the addition of fluoride and good stability in aqueous solution, the hydroxyl-decorated coumarin connected with the bulky tert-butyldiphenyloxysilyl group (-OSitBuPh₂) has been selected for further investigation of its potential as a fluoride sensor. This hydroxyl-decorated coumarin can selectively sense fluoride ions in aqueous media (contain 0.8% MeCN) with desirable response times (40 min). The limit of detection of this compound was determined as 0.043 ppm, satisfying the standard fluoride level (0.7 ppm) in drinking water recommended by U.S. Department of Health and Human Services. The application of this silyl-capped coumarin derivative for fluoride analysis in collected water samples displayed satisfactory analytical accuracy (<5% error). Finally, this compound was successfully employed in fluorescence bioimaging of fluoride ions in human liver cancer cells, indicating its excellent cell permeability, ability to retain inside the living cells, and good stability under physiological conditions.

A fluorescent HTS assay for phosphohydrolases based on nucleoside 5'-fluorophosphates: its application in screening for inhibitors of mRNA decapping scavenger and PDE-I

Several nucleotide-specific phosphohydrolases can cleave P-F bonds in substrate analogues containing a fluorophosphate moiety to release fluoride ions. In this work, by employing a fluoride-sensitive molecular sensor, we harnessed this cleavage reaction to develop a fluorescence assay to screen for phosphohydrolase inhibitors. The assay is rapid, sensitive, and based on simple and synthetically available reagents. The assay was adapted to the high-throughput screening (HTS) format and its utility was demonstrated by screening an 'in-house' library of small nucleotides against two enzymes: DcpS, a metal-independent mRNA decapping pyrophosphatase of the histidine triad (HIT) family; and PDE-I, a divalent cation-dependent nuclease. Our screening results agreed with the known specificities of DcpS and PDE-I, and led to the selection of several inhibitors featuring low-micromolar IC50 values. For DcpS, we also verified the results by using an alternative method with the natural substrate. Notably, the assay presented here is the first fluorescence-based HTS-adaptable assay for DcpS, an established therapeutic target for spinal muscular atrophy. The assay should be useful for phosphohydrolase specificity profiling and inhibitor discovery, particularly in the context of DcpS and other HIT-family enzymes, which play key roles in maintaining cellular functions and have been linked to disease development.

Encumbrance in desilylation triggered fluorogenic detection of the fluoride ion - a kinetic approach

Highly selective fluorogenic detection of the fluoride ion becomes viable due to its propensity towards cleaving Si-O and Si-C bonds, the key reactive elements in fluoride selective chemodosimeters. Herein, acridinedione derived, two novel fluorescent probes bearing tertiarybutyldiphenylsilyloxy (TBDPS) and tertiarybutyldimethylsilyloxy (TBDMS) groups were synthesized and their fluoride selective dosimetric action in organic solvents and in mixed aqueous medium was established through steady state and time resolved fluorescence techniques. Unusually, these molecular probes maintain their sensitivity down to 10 ppb in both organic and mixed aqueous medium; hence they can be considered as highly selective and sensitive fluorescent probes for the fluoride anion. By following the kinetics of the desilylation process it is established that the reaction follows second order kinetics with respect to fluoride ion concentration in acetonitrile whereas it becomes first order in mixed aqueous medium owing to its high degree of hydration. Also, the hydrophobic and sterically crowded substitution on the silyl receptor hampers the reaction kinetics only in organic solvents whereas its influence in mixed aqueous medium is relatively very less. However, common inorganic cations (Na⁺) effectively hinder the reaction kinetics through strong ion pair interaction and prolong the response time. Therefore, the indigenous influences of three different factors which encumber the desilylation process were quantitatively enumerated and the prospective application of these fluorescent probes in detecting and validating fluoride ions in various environmental samples is demonstrated.

β-Carboline–imidazopyridine hybrids: selective and sensitive optical sensors for copper and fluoride ions

Two rationally designed β-carboline–imidazopyridine hybrid chromofluorescent sensors S1 and S2 have been successfully synthesized and evaluated for the selective sensing of metal ions and anions.

A fluoride activated methylene blue releasing platform for imaging and antimicrobial photodynamic therapy of human dental plaque

A fluoride activated methylene blue releasing platform was developed for imaging and antimicrobial photodynamic therapy of human dental plaque.

Synthesis of Bisimidazole Derivatives for Selective Sensing of Fluoride Ion

Rapid and efficient analysis of fluoride ion is crucial to providing key information for fluoride ion hazard assessment and pollution management. In this study, we synthesized one symmetrical structure called 1,4-bis(4,5-diphenyl-1H-imidazol-2-yl)benzene (1a) and two asymmetrical structures, namely 2-(4-(4,5-diphenyl-1H-imidazol-2-yl)phenyl)-1H-phenanthro(9,10-d)imidazole (1b) and 2-(4-(4,5-diphenyl-1H-imidazol-2-yl)phenyl)-1H-imidazo(4,5-f)(1,10)phenanthroline (1c), which served as an efficient anion sensor for fluoride ion over a wide range of other anions (Cl-, Br-, I-, NO₃-, ClO₄-, HSO₄-, BF₄-, and PF₆-) owing to imidazole group in the main backbone. The absorption intensity of compound 1a at λmax 358 nm slightly decreased; however, a new band at λmax 414 nm appeared upon the addition of fluoride ion, while no evident change occurred upon the addition of eight other anions. The photoluminescence intensity of compound 1a at λmax 426 nm was nearly quenched and fluorescence emission spectra were broadened when fluoride ion was added into dimethyl sulfoxide (DMSO) solution of compound 1a. Compared with the optical behaviors of the DMSO solution of compound 1a in the presence of Bu₄N⁺F-, compounds 1b and 1c exhibited considerable sensitivity to fluoride ion due to the increase in coplanarity. Furthermore, compared with the fluorescence emission behaviors of the DMSO solutions of compounds 1a and 1b in the presence of Bu₄N⁺F-, compound 1c exhibited the most significant sensitivity to fluoride ion due to the charge transfer enhancement. Consequently, the detection limits of compounds 1a-1c increased from 5.47 × 10-6 M to 4.21 × 10-6 M to 9.12 × 10-7 M. Furthermore, the largest red shift (75 nm) of the DMSO solution compound 1c in the presence of fluoride ion can be observed. Our results suggest that the increase in coplanarity and the introduction of electron-withdrawing groups to the imidazole backbone can improve the performance in detecting fluoride ion.

Green, Water-Dispersible Photoluminescent On-Off-On Probe for Selective Detection of Fluoride Ions

Considering the high toxicity and widespread availability of fluoride ions in different environmental matrices, it is imperative to design a probe for its detection. In view of this, a selective fluorescent on-off-on probe based on carbon quantum dots (CQDs) and Eu³⁺ has been designed. We have synthesized water-soluble carboxylic acid-functionalized CQDs and monitored their interaction with Eu³⁺. Luminescence quenching in the CQD emission was observed (switch-off) on adding Eu³⁺ ions. We investigate the reason for this luminescence quenching using time-resolved emission and high-resolution transmission electron microscopy (HRTEM) studies and observed that both electron transfer from CQDs to Eu³⁺ and aggregation of CQDs are responsible for the luminescence quenching. ζ-Potential and X-ray photoelectron spectroscopy studies confirm Eu³⁺ binding with the COOH groups on CQD surface. Interestingly, luminescence regains after the addition of fluoride ions to the CQDs/Eu³⁺ system (switch-on). This has been assigned to the removal of Eu³⁺ from the CQD surface due to the formation of EuF₃ and is confirmed by X-ray diffraction and HRTEM measurements. The sensitivity of the probe was tested by carrying out experiments with other competing ions and was found to be selective for fluoride ions. Experiments with variable concentrations of fluoride ions suggest that the working range of the probe is 1-25 ppm. The probe has been successfully tested for the detection of fluoride ions in a toothpaste sample and the results were compared to those of ion chromatography. To the best of our knowledge, this is the first report based on CQDs and Eu³⁺ for the detection of fluoride ions, wherein a clear mechanism of the detection has been demonstrated, which, in turn, will help to develop better detection methods. The suggested probe is green, economical, rapid, efficient, and, most importantly, selective and can be used for the detection of fluoride ions in real environmental samples.

A smart ratiometric red fluorescent chemodosimeter for fluoride based on anthraquinone nosylate

A smart ratiometric red fluorescent chemodosimeter (AH) has been explored for specific detection of F⁻ with a lowest detection limit of 3.45 × 10⁻¹⁰ M. The sensing mechanism was worked out as fluoride-triggered deprotonation of imidazole accompanied by deprotection of the nosylate group.

Synthesis and application of a new class of D–π–A type charge transfer probe containing imidazole – naphthalene units for detection of F− and CO2

A new class of D–π–A type charge transfer probe, 3 and 4, containing imidazole – naphthalene moieties as donor and acceptor, respectively, has been synthesized via a Suzuki coupling reaction.

Graphene Oxide-Based Sensor for Ultrasensitive Visual Detection of Fluoride

Visual fluoride ion detection with a detection limit down to pmol L-1 is achieved through quenching/reactivating the fluorescence of N-doped graphene oxide.

Fluorescence and visual detection of fluoride ions using a photoluminescent graphene oxide paper sensor

The instant and on-site detection of trace aqueous fluoride ions is still a challenge for environmental monitoring and protection. This work demonstrates a new analytical method and its utility of a paper sensor for visual detection of F(-) on the basis of the fluorescence resonance energy transfer (FRET) between photoluminescent graphene oxide (GO) and silver nanoparticles (AgNPs) through the formation of cyclic esters between phenylborinic acid and diol. The fluorescence of GO was quenched by the AgNPs, and trace F(-) can recover the fluorescence of the quenched photoluminescent GO. The increase in fluorescence intensity is proportional to the concentration of F(-) in the range of 0.05-0.55 nM, along with a limit of detection (LOD) as low as 9.07 pM. Following the sensing mechanism, a paper-based sensor for the visual detection of aqueous F(-) has been successfully developed. The paper sensor showed high sensitivity for aqueous F(-), and the LOD could reach as low as 0.1 μM as observed by the naked eye. The very simple and effective strategy reported here could be extended to the visual detection of a wide range of analytes in the environment by the construction of highly efficient FRET nanoprobes.

Reaction-based phosphorescent nanosensor for ratiometric and time-resolved luminescence imaging of fluoride in live cells

A two-channel phosphorescent nanosensor for fluoride with excellent selectivity and sensitivity has been designed and synthesized. By using the specific chemical affinity between silicon and fluoride, the nanosensor has been used for ratiometric and time-resolved luminescence detection of F(-) in aqueous media and live cells.

Fluoride-induced modulation of ionic transport in asymmetric nanopores functionalized with "caged" fluorescein moieties

We demonstrate experimentally and theoretically a nanofluidic fluoride sensing device based on a single conical pore functionalized with "caged" fluorescein moieties. The nanopore functionalization is based on an amine-terminated fluorescein whose phenolic hydroxyl groups are protected with tert-butyldiphenylsilyl (TBDPS) moieties. The protected fluorescein (Fcn-TBDPS-NH2) molecules are then immobilized on the nanopore surface via carbodiimide coupling chemistry. Exposure to fluoride ions removes the uncharged TBDPS moieties due to the fluoride-promoted cleavage of the silicon-oxygen bond, leading to the generation of negatively charged groups on the fluorescein moieties immobilized onto the pore surface. The asymmetrical distribution of these groups along the conical nanopore leads to the electrical rectification observed in the current-voltage (I-V) curve. On the contrary, other halides and anions are not able to induce any significant ionic rectification in the asymmetric pore. In each case, the success of the chemical functionalization and deprotection reactions is monitored through the changes observed in the I-V curves before and after the specified reaction step. The theoretical results based on the Nernst-Planck and Poisson equations further demonstrate the validity of an experimental approach to fluoride-induced modulation of nanopore current rectification behaviour.

Quantitative determination of fluoride in pure water using luminescent europium complexes

Two luminescent probes [Eu.L¹⁻²]⁺ are reported for the rapid detection of fluoride in water. Probes [Eu.L¹⁻²]⁺ exhibit exceptional enhancements in Eu emission in the presence of fluoride, permitting its selective determination within the environmentally relevant concentration range (20-210 μM).