Localized three-photon upconversion enhancement in silver nanowire networks and its effect in thermal sensing

The quest for enhancing the upconversion luminescence (UCL) efficiency of rare-earth doped materials has been a common target in nanophotonics research. Plasmonic nanoarchitectures have proven potential for amplifying UCL signals, prompting investigations into localized enhancement effects within noble metal nanostructures. In this work we investigate the localized enhancement of UCL in silver nanowire (AgNW) networks coated with upconversion nanoparticles (UCNPs) by employing hyperspectral microscopy to unveil distinctive regions of local enhancement. Our study reveals that three-photon upconversion processes predominantly occur at hot-spots in nanowire junctions, contributing to heightened luminescence intensity on AgNW networks. Intriguingly, our findings demonstrate that enhancement on AgNWs introduces significant artifacts for thermometry based on ratiometric analysis of the emission spectra, resulting in the observation of artificial thermal gradients. To address this challenge, we developed correction methods that were successfully applied to mitigate this effect, enabling the generation of accurate thermal maps and the realization of dynamic thermal measurements. We quantified the distance-dependent enhancement profiles and studied the effect of temperature by exploiting the heat dissipation under varying electrical voltages across the electrically percolated AgNW networks. The observations were confirmed through numerical calculations of the enhancement factor and the energy transfer rates. This comprehensive investigation sheds light on the complex interplay between plasmonic nanostructures, three-photon upconversion processes, and their influence on thermal sensing applications. The presented hyperspectral method not only allows a direct visualization of plasmonic hot-spots but also advances our understanding of localized enhancements. The correction methods applied to analyze the emission spectra also contribute to the refinement of accurate temperature mapping using UCNPs, thereby enhancing the reliability of this thermal sensing technology.

Photophysics and its application in photon upconversion

Photoluminescence (PL) upconversion is a phenomenon involving light-matter interaction, where the energy of the emitted photons is higher than that of the incident photons. PL upconversion has promising applications in optoelectronic devices, displays, photovoltaics, imaging, diagnosis and treatment. In this review, we summarize the mechanism of PL upconversion and ultrafast PL physical processes. In particular, we highlight the advances in laser cooling, biological imaging, volumetric displays and photonics.

A paper-based photoelectrochemical aptsensor using near-infrared light-responsive AgBiS2 nanoflowers as probes for the detection of Staphylococcus aureus in pork

Staphylococcus aureus is a gram-positive bacterium that can easily cause outbreaks of food-borne diseases. In this work, a signal-enhanced three-dimensional paper-based photoelectrochemical (PEC) aptsensor for the rapid and sensitive determination of S. aureus was developed. Specifically, gold nanoparticles (AuNPs) were electrodeposited on a paper-based working electrode to provide binding sites for a sulfhydryl-functionalized aptamer. Subsequently, S. aureus was captured with high specificity by a carboxyl-functionalized aptamer modified with amino-functionalized AgBiS2 nanoflowers (NH2-AgBiS2 NFs), which functionalized as PEC probes that generated strong photocurrent under irradiation with 980-nm light. By exploiting the "aptamer-target-aptamer" PEC sensing platform, the rapid and ultrasensitive detection of S. aureus was achieved. The sensor had a wide linear range of 20 to 2 × 107 CFU/mL and low limit of detection of 4 CFU/mL. Further, the applicability of the as-prepared aptsensor was successfully certified for the analysis of pork samples artificially contaminated with S. aureus.

Surface plasmon resonance of Au/Ag metals for the photoluminescence enhancement of lanthanide ion Ln3+ doped upconversion nanoparticles in bioimaging

Deep tissue penetration, chemical inertness and biocompatibility give UCNPs a competitive edge over traditional fluorescent materials like organic dyes or quantum dots. However, the low quantum efficiency of UNCPs becomes an obstacle. Among extensive methods and strategies currently used to prominently solve this concerned issue, surface plasmon resonance (SPR) of noble metals is of great use due to the agreement between the SPR peak of metals and absorption band of UCNPs. A key challenge of this match is that the structures and sizes of noble metals have significant influences on the peak of SPR formants, where achieving an explicit elucidation of relationships between the physical properties of noble metals and their SPR formants is of great importance. This review aims to clarify the mechanism of the SPR effect of noble metals on the optical performance of UCNPs. Furthermore, novel research studies in which Au, Ag or Au/Ag composites in various structures and sizes are combined with UCNPs through different synthetic methods are summarized. We provide an overview of improved photoluminescence for bioimaging exhibited by different composite nanoparticles with respect to UCNPs acting as both cores and shells, taking Au@UCNPs, Ag@UCNPs and Au/Ag@UCNPs into account. Finally, there are remaining shortcomings and latent opportunities which deserve further research. This review will provide directions for the bioimaging applications of UCNPs through the introduction of the SPR effect of noble metals.

Recent Development in Sensitizers for Lanthanide-Doped Upconversion Luminescence

The attractive features of lanthanide-doped upconversion luminescence (UCL), such as high photostability, nonphotobleaching or photoblinking, and large anti-Stokes shift, have shown great potentials in life science, information technology, and energy materials. Therefore, UCL modulation is highly demanded toward expected emission wavelength, lifetime, and relative intensity in order to satisfy stringent requirements raised from a wide variety of areas. Unfortunately, the majority of efforts have been devoted to either simple codoping of multiple activators or variation of hosts, while very little attention has been paid to the critical role that sensitizers have been playing. In fact, different sensitizers possess different excitation wavelengths and different energy transfer pathways (to different activators), which will lead to different UCL features. Thus, rational design of sensitizers shall provide extra opportunities for UCL tuning, particularly from the excitation side. In this review, we specifically focus on advances in sensitizers, including the current status, working mechanisms, design principles, as well as future challenges and endeavor directions.

A quantitative single-nanowire study on the plasmonic enhancement for the upconversion photoluminescence of rare-earth-doped nanoparticles

The enhancement effects of the upconversion photoluminescence of rare-earth-doped nanoparticles by the localized surface plasmon resonance of a single Ag nanowire are quantified on a single-nanowire scale assisted by selective etching treatment.

Upconversion, MRI imaging and optical trapping studies of silver nanoparticle decorated multifunctional NaGdF4:Yb,Er nanocomposite

The multifunctional upconversion nanoparticles (UCNPs) are fascinating tool for biological applications. In the present work, photon upconverting NaGdF₄:Yb,Er and Ag nanoparticles decorated NaGdF₄:Yb,Er (NaGdF₄:Yb,Er@Ag) nanoparticles were prepared using a simple polyol process. Rietveld refinement was performed for detailed crystal structural and phase fraction analysis. The morphology of the NaGdF₄:Yb,Er@Ag was examined using high-resolution transmission electron microscope, which reveals silver nanoparticles of 8 nm in size were decorated over spherical shaped NaGdF₄:Yb,Er nanoparticles with a mean particle size of 90 nm. The chemical compositions were confirmed by EDAX and inductively coupled plasma-optical emission spectrometry analyses. The upconversion luminescence (UCL) of NaGdF₄:Yb,Er at 980 nm excitation showed an intense red emission. After incorporating the silver nanoparticles, the UCL intensity decreased due to weak scattering and surface plasmon resonance effect. The VSM magnetic measurement indicates both the UCNPs possess paramagnetic behaviour. The NaGdF₄:Yb,Er@Ag showed computed tomography imaging. Magnetic resonance imaging study exhibited better T1 weighted relaxivity in the NaGdF₄:Yb,Er than the commercial Gd-DOTA. For the first time, the optical trapping was successfully demonstrated for the upconversion NaGdF₄:Yb,Er nanoparticle at near-infrared 980 nm light using an optical tweezer setup. The optically trapped UCNP possessing paramagnetic property exhibited a good optical trapping stiffness. The UCL of trapped single UCNP is recorded to explore the effect of the silver nanoparticles. The multifunctional properties for the NaGdF₄:Yb,Er@Ag nanoparticle are demonstrated.

Full shell coating or cation exchange enhances luminescence

Core-shell structure is routinely used for enhancing luminescence of optical nanoparticles, where the luminescent core is passivated by an inert shell. It has been intuitively accepted that the luminescence would gradually enhance with the coverage of inert shell. Here we report an “off-on” effect at the interface of core-shell upconversion nanoparticles, i.e., regardless of the shell coverage, the luminescence is not much enhanced unless the core is completely encapsulated. This effect indicates that full shell coating on the luminescent core is critical to significantly enhance luminescence, which is usually neglected. Inspired by this observation, a cation exchange approach is used to block the energy transfer between core nanoparticle and surface quenchers. We find that the luminescent core exhibits enhanced luminescence after cation exchange creates an effective shell region. These findings are believed to provide a better understanding of the interfacial energy dynamics and subsequent luminescence changes.

Core-shell designs enhance the luminescence of lanthanide-doped upconversion nanoparticles (UCNPs), but the effect of shell coverage was insufficiently characterized. Here the authors demonstrate, on a series of core-shell UCNPs with various shell coverage ratios, an on-off effect by which luminescence is enhanced only when a full coverage is achieved.

Binary Nanoparticle Superlattices for Plasmonically Modulating Upconversion Luminescence

Engineering a facile and controllable approach to modulate the spectral properties of lanthanide-doped upconversion nanoparticles (UCNPs) is always an ongoing challenge. Herein, long-range ordered, distinct two-dimensional (2D) binary nanoparticle superlattices (BNSLs) composed of NaREF₄ :Yb/Er (RE = Y and Gd) UCNPs and plasmonic metallic nanoparticles (Au NPs), including AB, AB₃ , and AB₁₃ lattices, are fabricated via a slow evaporation-driven self-assembly to achieve plasmonic modulation of upconversion luminescence (UCL). Optical measurements reveal that typical red-green UCL from UCNPs can be effectively modulated into reddish output in BNSLs, with a drastically shortened lifetime. Notably, for AB₃ - and AB₁₃ -type BNSLs with more proximal Au NPs around each UCNP, modified UCL with fine-structured spectral lineshape is observed. These differences could be interpreted by the interplay of collective plasmon resonance introduced by 2D periodic Au arrays and spectrally selective energy transfer between UCNPs and Au. Thus, fabricating UCNP-Au BNSLs with desired lattice parameters and NP configurations could be a promising way to tailor the UCL through controlled plasmonic modulation.

Colloidal clusters of icosahedrons and face-centred cubes

Synthetically colloidal clusters with new functions and well-controlled size distribution can in principle be constructed using colloidal particles. The building units could be integrated into dense-packed and desired structured with novel functions by means of an efficient strategy or binding patterns. Here we synthesized colloidal clusters of icosahedrons and long-range ordered face-centered cubes (FCCs) via emulsion self-assembly using fluorescence upconversion nanoparticles NaGdF₄: Yb³⁺, Er³⁺ as building blocks. The icosahedrons and FCCs structure may generate spontaneously due to an entropy-driven process. The morphology and structure of colloidal clusters have noticeable transformation from icosahedron-like symmetry to FCC symmetry with the increasing size of clusters. Furthermore, the colloidal clusters could be decorated with cationic polyethyleneimine (PEI) via electrostatic interaction. When copper ions are added, the amino groups of PEI could coordinate with Cu²⁺ forming low toxic PEI-Cu²⁺ layers, which can further serve as energy receptors to quench upconversion fluorescence with 980 nm laser excitation. Our results reflect that the colloidal clusters not only can serve as a fluorescence platform of detection and analysis but also may represent advancement in the field of colloidal and interface sciences.

Recent advances of lanthanide-doped upconversion nanoparticles for biological applications

Near infrared (NIR) excited lanthanide-doped upconversion nanoparticles (UCNPs) are emerging as a new type of fluorescent tag for biological applications, which can emit multi-photon ultraviolet, visible or NIR luminescence for imaging or activation of photosensitive molecules. Here, we present a comprehensive review on recent advances of UCNPs for a manifold of biological applications, including upconversion mechanisms, building bright multicolor upconversion nanocrystals, single nanoparticle and super resolution imaging, in vivo optical and multimodal imaging, photodynamic therapy, light-controlled drug release, biosensing, and toxicities. Our perspectives on the future development of UCNPs are also described.

Plasmonically Enhanced Upconversion Luminescence via Holographically Formed Silver Nanogratings

Greatly enhanced upconversion luminescence was demonstrated by integrating the core-shell upconversion nanorods with the Ag nanogratings. Both the Ag nanogratings and upconversion nanorods were fabricated/synthesized in a facile, cost-effective, high-throughput way. Experimental results showed that the upconversion luminescence intensity of Er³⁺ in the core-shell upconversion nanorods can be well tuned and enhanced by changing the shell thickness and the period of the Ag nanograting. The underlying physical mechanism for the upconversion luminescence enhancement was attributed to the plasmonically enhanced near infrared broadband absorption of the periodic Ag nanograting and the localized surface plasmon resonance of Ag nanocrystals. The maximum enhanced factors of 523 nm, 544 nm (green emission), and 658 nm (red emission) of Er³⁺ ions excited at 980 nm are 3.8-, 5.5-, and 4.6-folds, respectively. Our fabrication approach and results suggest that such a simple integration is potentially useful for biosensing/imaging and anti-counterfeiting applications.

Recent Progress of Rare-Earth Doped Upconversion Nanoparticles: Synthesis, Optimization, and Applications

Upconversion is a nonlinear optical phenomenon that involves the emission of high-energy photons by sequential absorption of two or more low-energy excitation photons. Due to their excellent physiochemical properties such as deep penetration depth, little damage to samples, and high chemical stability, upconversion nanoparticles (UCNPs) are extensively applied in bioimaging, biosensing, theranostic, and photochemical reactions. Here, recent achievements in the synthesis, optimization, and applications of UCNP-based nanomaterials are reviewed. The state-of-the-art approaches to synthesize UCNPs in the past few years are introduced first, followed by a summary of several strategies to optimize upconversion emissive properties and various applications of UCNPs. Lastly, the challenges and future perspectives of UCNPs are provided as a conclusion.

Large-scale dewetting assembly of gold nanoparticles for plasmonic enhanced upconversion nanoparticles

Plasmonic nanostructures have been broadly investigated for enhancing many photophysical properties of luminescent nanomaterials. Precisely controlling the distance between the plasmonic nanostructure and the luminescent material is challenging particularly for the large-scale production of individual nanoparticles. Here we report an easy and reliable method for the large-scale dewetting of plasmonic gold nanoparticles onto core-shell (CS) upconversion nanoparticles (UCNPs). A commensurate NaYF4 shell with a thickness between 5 nm and 15 nm is used as a tunable spacer to control the distance between the UCNP and the plasmonic gold nanoparticles. The upconversion emission intensity of single gold decorated core-inert shell (Au-CS) UCNPs is quantitatively characterized using a scanning confocal microscope. The results demonstrate the highest feasible enhancement of upconversion emission and a record reduction in lifetime for UCNPs fabricated in this manner. The Au-CS UCNPs are further investigated by simulation and synchrotron near edge X-ray absorption fine structure (NEXAFS) analysis.

Enhance the Er3+ Upconversion Luminescence by Constructing NaGdF4:Er3+@NaGdF4:Er3+ Active-Core/Active-Shell Nanocrystals

NaGdF4:12%Er3+@NaGdF4:x%Er3+ (x = 0, 6, 8, 10, and 12) active-core/active-shell nanoparticles (NPs) were peculiarly synthesized via a delayed nucleation pathway with procedures. The phase, shape, and size of the resulting core-shell NPs are confirmed by transmission electron microscopy and X-ray diffraction. Coated with a NaGdF4:10%Er3+ active shell around the NaGdF4:12%Er3+ core NPs, a maximum luminescent enhancement of about 336 times higher than the NaGdF4:12%Er3+ core-only NPs was observed under the 1540 nm excitation. The intensity ratio of green to red was adjusted through the construction of the core-shell structure and the change of Er3+ concentration in the shell. By analyzing the lifetimes of emission bands and exploring the energy transition mechanism, the giant luminescence enhancement is mainly attributed to the significant increase in the near-infrared absorption at 1540 nm and efficient energy migration from the shell to core.

Sensitization, energy transfer and infra-red emission decay modulation in Yb3+-doped NaYF4 nanoparticles with visible light through a perfluoroanthraquinone chromophore

Infra-red emission (980 nm) of sub 10 nm Yb3+-doped NaYF4 nanoparticles has been sensitized through the excitation of 2-hydroxyperfluoroanthraquinone chromophore (1,2,3,4,5,6,7-heptafluro-8-hydroxyanthracene-9,10-dione) functionalizing the nanoparticle surface. The sensitization is achieved with a broad range of visible light excitation (400-600 nm). The overall near infra-red (NIR) emission intensity of Yb3+ ions is increased by a factor 300 as a result of the broad and strong absorption of the chromophore compared with ytterbium's intrinsic absorption. Besides the Yb3+ NIR emission, the hybrid composite shows organic chromophore-based visible emission in the orange-red region of the spectrum. We observe the energy migration process from the sensitized Yb3+ ions at the surface to those in the core of the particle using time-resolved optical spectroscopy. This highlights that the local environments for emitting Yb3+ ions at the surface and center of the nanoparticle are not identical, which causes important differences in the NIR emission dynamics. Based on the understanding of these processes, we suggest a simple strategy to control and modulate the decay time of the functionalized Yb3+-doped nanoparticles over a relatively large range by changing physical or chemical parameters in this model system.

808-nm-Light-Excited Lanthanide-Doped Nanoparticles: Rational Design, Luminescence Control and Theranostic Applications

808 nm-light-excited lanthanide (Ln³⁺ )-doped nanoparticles (LnNPs) hold great promise for a wide range of applications, including bioimaging diagnosis and anticancer therapy. This is due to their unique properties, including their minimized overheating effect, improved penetration depth, relatively high quantum yields, and other common features of LnNPs. In this review, the progress of 808 nm-excited LnNPs is reported, including their i) luminescence mechanism, ii) luminescence enhancement, iii) color tuning, iv) diagnostic and v) therapeutic applications. Finally, the future outlook and challenges of 808 nm-excited LnNPs are presented.

Near-infrared photochemistry at interfaces based on upconverting nanoparticles

We review near-infrared photochemistry at interfaces based on upconverting nanoparticles, highlight its potential applications, and discuss the challenges.

Engineered Upconversion Nanoparticles for Resolving Protein Interactions inside Living Cells

Upconversion nanoparticles (UCNPs) convert near-infrared into visible light at much lower excitation densities than those used in classic two-photon absorption microscopy. Here, we engineered <50 nm UCNPs for application as efficient lanthanide resonance energy transfer (LRET) donors inside living cells. By optimizing the dopant concentrations and the core-shell structure for higher excitation densities, we observed enhanced UCNP emission as well as strongly increased sensitized acceptor fluorescence. For the application of these UCNPs in complex biological environments, we developed a biocompatible surface coating functionalized with a nanobody recognizing green fluorescent protein (GFP). Thus, rapid and specific targeting to GFP-tagged fusion proteins in the mitochondrial outer membrane and detection of protein interactions by LRET in living cells was achieved.

A flexible and superhydrophobic upconversion-luminescence membrane as an ultrasensitive fluorescence sensor for single droplet detection

A Ln³⁺-doped (Yb³⁺, Tm³⁺ or Yb³⁺, Er³⁺ co-doped) NaYF₄ nanoparticle/polystyrene hybrid fibrous membrane (HFM) was fabricated using an electrospinning technique. The HFM shows upconversion luminescence (UCL), flexibility, superhydrophobicity and processability. The UCL membrane can be used as a fluorescence sensor to detect bioinformation from a single water droplet (~10 μl). Based on the fluorescence resonance energy transfer, the detection limits of this sensor can reach 1 and 10 ppb for the biomolecule, avidin, and the dye molecule, Rhodamine B, respectively, which are superior to most of the fluorescence sensors reported in previous works. After the fluorescence detection, the target droplet was easily removed without residues on the UCL membrane surface due to its superhydrophobic property, which exhibits an excellent recyclability that cannot be achieved by traditional liquid-based detection systems.

Plasmon-Mediated Solar Energy Conversion via Photocatalysis in Noble Metal/Semiconductor Composites

Plasmonics has remained a prominent and growing field over the past several decades. The coupling of various chemical and photo phenomenon has sparked considerable interest in plasmon-mediated photocatalysis. Given plasmonic photocatalysis has only been developed for a relatively short period, considerable progress has been made in improving the absorption across the full solar spectrum and the efficiency of photo-generated charge carrier separation. With recent advances in fundamental (i.e., mechanisms) and experimental studies (i.e., the influence of size, geometry, surrounding dielectric field, etc.) on plasmon-mediated photocatalysis, the rational design and synthesis of metal/semiconductor hybrid nanostructure photocatalysts has been realized. This review seeks to highlight the recent impressive developments in plasmon-mediated photocatalytic mechanisms (i.e., Schottky junction, direct electron transfer, enhanced local electric field, plasmon resonant energy transfer, and scattering and heating effects), summarize a set of factors (i.e., size, geometry, dielectric environment, loading amount and composition of plasmonic metal, and nanostructure and properties of semiconductors) that largely affect plasmonic photocatalysis, and finally conclude with a perspective on future directions within this rich field of research.

Enhanced Upconversion Luminescence of Metal-Capped NaGd0.3 Yb0.7 F4:Er Submicrometer Particles

Metallic nanostructures are often used to enhance photoluminescence of nanomaterials based on local field enhancement with plasmons at metal surfaces. Here upconversion luminescence (UCL) enhancement of submicrometer-size NaGd0.3 Yb0.7 F4 :Er particles in cap-like metal cavities, formed by deposition of a silver film on the particles dispersed on glass substrates, is studied. UCL of the particles is shown to be influenced by not only the plasmon-enhanced local field but also the cavity modes. By varying the cavity size and location of the particles in the cavities, fluctuant variations of the UCL enhancement and electronic depopulation rate are observed in experiments. Typically, a maximum of 12-fold enhancement of the UCL intensity is obtained. Combining the results with numerical simulations, the phenomenon is ascribed to effects of metal quenching, plasmonic field enhancement, and the cavity modes for the excitation and emission photons. Finally it is verified that, for the cap-like submicrometer metal cavities, allocating the particles at the open mouths of the cavities is more advantageous to obtaining stronger enhancements of the particles' UCL. And the demonstrated structure is also convenient to fabricate for applications, e.g., in solar cells.

Near-Infrared-Sensitive Materials Based on Upconverting Nanoparticles

The near-infrared (NIR) region of the spectrum is called the "therapeutic window" because NIR light can penetrate deeply into tissue. Therefore, NIR-sensitive materials are attractive for biomedical applications. Recently, upconverting nanoparticles (UCNPs) were used to construct NIR-sensitive materials. UCNPs convert NIR light to UV or visible light, which can trigger photoreactions of photosensitive materials. Here, how to use UCNPs to construct NIR-sensitive materials is introduced, applications of NIR-sensitive materials with a focus on biomedical applications are highlighted, and the associated challenges are discussed.

Fast Photoconductive Responses in Organometal Halide Perovskite Photodetectors

Inorganic semiconductor-based photodetectors have been suffering from slow response speeds, which are caused by the persistent photoconductivity of semiconductor materials. For realizing high speed optoelectronic devices, the organometal halide perovskite thin films were applied onto the interdigitated (IDT) patterned Au electrodes, and symmetrical structured photoconductive detectors were achieved. The detectors were sensitive to the incident light signals, and the photocurrents of the devices were 2-3 orders of magnitude higher than dark currents. The responsivities of the devices could reach up to 55 mA W(1-). Most importantly, the detectors have a fast response time of less than 20 μs. The light and bias induced dipole rearrangement in organometal perovskite thin films has resulted in the instability of photocurrents, and Ag nanowires could quicken the process of dipole alignment and stabilize the photocurrents of the devices.

Upconversion luminescence enhancement in plasmonic architecture with random assembly of metal nanodomes

We report an experimental study on the highly enhanced upconversion luminescence (UCL) of β-NaYF4:Yb(3+)/Er(3+) nanocrystals (NCs) in a plasmonic architecture. For the architecture, we designed a thin film device composed of a thin layer of NCs capped with an upper layer of a plasmonic nanodome array (pNDA) and lower substrate of a back reflector (BR). Compared to the UCL intensity observed in a glass reference substrate, the designed plasmonic architecture exhibits distinctively strong luminescence enhanced by up to 800-fold. The intensity considerably exceeds the previously reported luminescence intensity regardless of the excitation power. We elucidated a mechanism explaining the large UCL enhancement, which quantitatively analyzes the combination of plasmonic effects as well as multiple large scattering. More importantly, we provided a detailed analysis of the Ag NDA-derived and BR-assisted plasmonic effects that contribute to an increase in the radiative decay rate and an enhancement of the absorption of incident light. The present study is expected to be beneficial for designing a thin film-based plasmonic structure with a randomized metal nanostructure for high-efficiency photovoltaic devices and infrared detectors.

Fabrication of core@spacer@shell Aunanorod@mSiO2@Y2O3:Er nanocomposites with enhanced upconversion fluorescence

We fabricated the well-defined Au_nanorod@mSiO₂@Y₂O₃:Er nanocomposites with about 10- and 8-fold strongest upconversion enhancement for green and red emissions, respectively.

Huge enhancement of upconversion luminescence by broadband dye sensitization of core/shell nanocrystals

The UCL intensity of dye-sensitized UCNCs excited at 820 nm is 800-folds higher than that of pure UCNCs excited at 980 nm.

Core–spacer–shell structured NaGdF4:Yb3+/Er3+@NaGdF4@Ag nanoparticles for plasmon-enhanced upconversion luminescence

UCNPs of NaGdF₄:20%Yb³⁺/2%Er³⁺@NaGdF₄@Ag with plasmon-enhanced up-converting emission were designed and obtained.

Tunable and ultra-broad plasmon enhanced upconversion emission of NaYF4:Yb3+, Er3+ nanoparticles deposited on Au films with papilla Au nanoparticles

The application of upconversion nanoparticles was limited due to their low upconversion efficiencies. In the paper, two kinds of Au films with tunable and broad surface plasmonic absorptions were used to enhance the upconversion emission of NaYF₄:Yb³⁺,Er³⁺ nanoparticles.

Experimental and theoretical photoluminescence studies in nucleic acid assembled gold-upconverting nanoparticle clusters

Combinations of rare earth doped upconverting nanoparticles (UCNPs) and gold nanostructures are sought as nanoscale theranostics due to their ability to convert near infrared (NIR) photons into visible light and heat, respectively. However, because the large NIR absorption cross-section of the gold coupled with their thermo-optical properties can significantly hamper the photoluminescence of UCNPs, methods to optimize the ratio of gold nanostructures to UCNPs must be developed and studied. We demonstrate here nucleic acid assembly methods to conjugate spherical gold nanoparticles (AuNPs) and gold nanostars (AuNSs) to silica-coated UCNPs and probe the effect on photoluminescence. These studies showed that while UCNP fluorescence enhancement was observed from the AuNPs conjugated UCNPs, AuNSs tended to quench fluorescence. However, conjugating lower ratios of AuNSs to UCNPs led to reduced quenching. Simulation studies both confirmed the experimental results and demonstrated that the orientation and distance of the UCNP with respect to the core and arms of the gold nanostructures played a significant role in PL. In addition, the AuNS-UCNP assemblies were able to cause rapid gains in temperature of the surrounding medium enabling their potential use as a photoimaging-photodynamic-photothermal agent.

Multimodal cancer imaging using lanthanide-based upconversion nanoparticles

Multimodal nanoprobes that integrate different imaging modalities in one nano-system could offer synergistic effect over any modality alone to satisfy the higher requirements on the efficiency and accuracy for clinical diagnosis and medical research. Upconversion nanoparticles (UCNPs), particularly lanthanide (Ln)-based NPs have been regarded as an ideal building block for constructing multimodal bioprobes due to their fascinating properties. In this review, we first summarize recent advances in the optimizations of existing UCNPs. In particular, we highlight the applications of Ln-based UCNPs for multimodal cancer imaging in vitro and in vivo. The explorations of UCNPs-based multimodal nanoprobes for targeting diagnosis and imaging-guided therapeutics are also presented. Finally, the challenges and perspectives of Ln-based UCNPs in this rapid growing field are discussed.

Upconversion of rare Earth nanomaterials

Rare earth nanomaterials, which feature long-lived intermediate energy levels and intraconfigurational 4f-4f transitions, are promising supporters for photon upconversion. Owing to their unique optical properties, rare earth upconversion nanomaterials have found applications in bioimaging, theranostics, photovoltaic devices, and photochemical reactions. Here, we review recent advances in the photon upconversion processes of these nanomaterials. We start by considering energy transfer models involved in the study of upconversion emissions, as well as well-established synthesis strategies to control the size and shape of rare earth upconversion nanomaterials. Progress in engineering energy transfer pathways, which play a dominant role in determining upconversion emission outputs, is then discussed. Lastly, representative optical applications of these materials are considered. The aim of this review is to provide inspiration for researchers to explore novel upconversion nanomaterials and extended optical applications.

Silver nanowires as receiving-radiating nanoantennas in plasmon-enhanced up-conversion processes

We demonstrate efficient coupling between plasmons in a single silver nanowire and nanocrystals doped with rare earth ions, α-NaYF4:Er(3+)/Yb(3+). Plasmonic interaction results in a sevenfold increase of the up-converted emission of nanocrystals located in the vicinity of the nanowires as well as much faster luminescence decays. The enhancement of the emission can be precisely controlled by the polarization of the excitation laser and is significantly stronger for polarization parallel to the nanowire antennas. Imaging of angular-resolved emission patterns in the Fourier plane reveals plasmon-mediated luminescence, where the up-converted radiation is emitted via the nanowire antennas as leakage radiation.

Upconversion improvement by the reduction of Na+-vacancies in Mn2+ doped hexagonal NaYbF4:Er3+ nanoparticles

A method of Mn²⁺ doping for the simultaneous control of lattice defects and luminescence output in β-NaYbF₄:Er³⁺ upconversion nanoparticles with a fixed composition of both host and dopants of Ln³⁺ is demonstrated.

Probing the nature of upconversion nanocrystals: instrumentation matters

Understanding upconversion nanocrystals: this review intends to summarize instrumental matters related to the characterization of upconversion nanocrystals from surface structures to intrinsic properties to ultimate challenges in nanocrystal analysis at single-particle levels.

Highly-reproducible Raman scattering of NaYF4:Yb,Er@SiO2@Ag for methylamphetamine detection under near-infrared laser excitation

NaYF4:Yb,Er@SiO₂@Ag displays highly-reproducible Raman enhancement ability for methylamphetamine detection under near-infrared excitation.