Solvent Geometry Regulated J- and H-Type Aggregates of Photoswitchable Organogelator: Phase-Selective Thixotropic Gelation and Oil Spill Recovery

We demonstrate supramolecular polymerization and formation of 1D nanofiber of azobenzene based organogelator (AZO-4) in cyclic hydrocarbon solvents (toluene and methylcyclohexane). The AZO-4 exhibits J- and H-type aggregates in toluene: MCH (9 : 1) and MCH: toluene (9 : 1) respectively. The type of aggregate was governed by the geometry of the solvents used in the self-assembly process. The J-type aggregates with high thermal stability in toluene is due to the enhanced interaction of AZO-4 π- surface with the toluene π-surface, whereas H-aggregate with moderate thermal stability in MCH was due to the interruption of the cyclic hydrocarbon in van der Waals interactions of peripheral chains of AZO-4 molecule. The light induced reversible photoisomerization is observed for both J- and H-aggregates. The macroscopic property revealed spontaneous and strong gelation in toluene preferably due to the strong interactions of the AZO-4 nanofibers with the toluene solvent molecules compared to the MCH. The rheological measurements revealed thixotropic nature of the gels by step-strain experiments at room temperature. The thermodynamic parameter (ΔHm) of gel-to-sol transition was determined for all the gels to get more insight into the gelation property. Furthermore, the phase selective gelation property was extended to the oil spill recovery application using diesel/water and petrol/water mixture.

Efficient Hydro- and Organogelation by Minimalistic Diketopiperazines Containing a Highly Insoluble Aggregation-Induced, Blue-Shifted Emission Luminophore*

We report the synthesis, gelation abilities and aggregation-induced, blue-shifted emission (AIBSE) properties of two minimalistic diketopiperazine-based gelators. Despite containing a highly insoluble luminophore that makes up more than half of their respective molecular masses, efficient hydrogelation by multiple stimuli for one and efficient organogelation for the other compound are reported. Insights into the aggregation and gelation properties were gained through examination of the photophysical and material properties of selected gels, which are representative of the different modes of gelation. The synthesis of the gelators is highly modular and based on readily available amino acid building blocks, allowing the efficient and rapid diversification of these core structures and fine-tuning of gel properties.

An alternative approach to create N-substituted cyclic dipeptides

N-Modified peptide backbones are promising peptidomimetics which offer several advantages in terms of improved biological activity and stability.

Reversibly Thermochromic Cyclic Dipeptide Nanotubes

Owing to their capability of forming extensive hydrogen bondings and the facile introduction of chirality, cyclic dipeptides (CDPs) have gained great attention as scaffolds for functional supramolecules. Surprisingly, introduction of a photopolymerizable diacetylene (DA) moiety to the CDP afforded nanotubular structures with enhanced stability and reversible thermochromism. A series of CDP-containing DAs (CDP-DAs) are prepared by coupling 10,12-pentacosadiynoic acid with CDPs, cyclo(-Gly-Ser) and cis/trans cyclo(-Ser-Ser). Fabrication of CDP-DA self-assemblies in a polar chloroform and methanol solvent mixture affords nanotubes comprising single-wall and multiwall structures. The self-assembly behavior and morphology characteristic are examined by scanning electron microscopy and transmission electron microscopy. Next, X-ray diffraction analysis confirms well-ordered lamellar structures with a perfect agreement with the bilayer formation leading to the tubular structure via lamellar scrolling behavior. Upon UV irradiation, monomeric CDP-DA tubular assemblies result in the blue-colored CDP/polydiacetylene (PDA) nanotubes. Interestingly, CDP/PDA nanotubes exhibit a reversible blue-to-red color change for over 10 consecutive thermal cycles. The CDP-DA/PDA supramolecular system demonstrates potential applications in developing stimulus-responsive functional materials.

Rapidly Recoverable Thixotropic Hydrogels from the Racemate of Chiral OFm Monosubstituted Cyclo(Glu-Glu) Derivatives

Both chiral OFm monosubstituted cyclo(l-Glu-l-Glu) and cyclo(d-Glu-d-Glu) display a robust gelation ability in a variety of organic solvents and water. In contrast to an individual enantiomer, their racemate can form rapidly recoverable thixotropic hydrogels with a remarkably shorter thixotropic recovery time. This unexpected thixotropic behavior is induced by the random arrangement of d- and l-enantiomers in the cell units, leading to the formation of "pseudoracemate", noncrystalline self-assemblies in the resulting 3D fibrous network.

A shear-induced network of aligned wormlike micelles in a sugar-based molecular gel. From gelation to biocompatibility assays

A new low molecular weight hydrogelator with a saccharide (lactobionic) polar head linked by azide-alkyne click chemistry was prepared in three steps. It was obtained in high purity without chromatography, by phase separation and ultrafiltration of the aqueous gel. Gelation was not obtained reproducibly by conventional heating-cooling cycles and instead was obtained by shearing the aqueous solutions, from 2 wt% to 0.25 wt%. This method of preparation favored the formation of a quite unusual network of interconnected large but thin 2D-sheets (7nm-thick) formed by the association side-by-side of long and aligned 7nm diameter wormlike micelles. It was responsible for the reproducible gelation at the macroscopic scale. A second network made of helical fibres with a 10-13nm diameter, more or less intertwined was also formed but was scarcely able to sustain a macroscopic gel on its own. The gels were analysed by TEM (Transmission Electronic Microscopy), cryo-TEM and SAXS (Small Angle X-ray Scattering). Molecular modelling was also used to highlight the possible conformations the hydrogelator can take. The gels displayed a weak and reversible transition near 20°C, close to room temperature, ascribed to the wormlike micelles 2D-sheets network. Heating over 30°C led to the loss of the gel macroscopic integrity, but gel fragments were still observed in suspension. A second transition near 50°C, ascribed to the network of helical fibres, finally dissolved completely these fragments. The gels showed thixotropic behaviour, recovering slowly their initial elastic modulus, in few hours, after injection through a needle. Stable gels were tested as scaffold for neural cell line culture, showing a reduced biocompatibility. This new gelator is a clear illustration of how controlling the pathway was critical for gel formation and how a new kind of self-assembly was obtained by shearing.

Molecular Self-Assembly of Cyclic Dipeptide Derivatives and Their Applications

Cyclic dipeptides (CDPs) are heterocyclic 2,5-diketopiperazines with exceptional structural rigidity, enzymatic stability, and biological activity, exhibiting a substantial tendency to take part in intermolecular interactions. Strong intermolecular interactions driven by unique hydrogen bonding patterns render CDPs with a high propensity to undergo molecular self-assembly. In this Review, the aim is to provide a comprehensive summary of design strategies used to engineer the molecular self-assembly of CDPs into functional nano- and micro-architectures and molecular gels with potential applications in biomedical and materials engineering fields.

Low-Molecular-Weight Organo- and Hydrogelators Based on Cyclo(l-Lys-l-Glu)

Four cyclo(l-Lys-l-Glu) derivatives (3-6) were synthesized from the coupling reaction of protecting l-lysine with l-glutamic acid followed by the cyclization, deprotection, and protection reactions. They can efficiently gelate a wide variety of organic solvents or water. Interestingly, a spontaneous chemical reaction proceeded in the organogel obtained from 3 in acetone exhibiting not only visual color alteration but also increasing mechanical strength with the progress of time due to the formation of Schiff base. Moreover, 6 bearing a carboxylic acid and Fmoc group displayed a robust hydrogelation capability in PBS solution. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) revealed the characteristic gelation morphologies of 3D fibrous network structures in the resulting organo- and hydrogels. FT-IR and fluorescence analyses indicated that the hydrogen bonding and π-π stacking play as major driving forces for the self-assembly of these cyclic dipeptides as low-molecular-weight gelators. X-ray diffraction (XRD) measurements and computer modeling provided information on the molecular packing model in the hydrogelation state of 6. A spontaneous chemical reaction proceeded in the organogel obtained from 3 in acetone exhibiting visual color alteration and increasing mechanical strength. 6 bearing an optimized balance of hydrophilicity to lipophilicity gave rise to a hydrogel in PBS with MGC at 1 mg/mL.

Photoresponsive gelators

We review the different approaches that have been used to form low molecular weight gels that respond to light.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Mechano-responsive gelation of water by a short alanine-derivative

We report the design of a structurally concise alanine derivative (Ala-hyd) that has a rotationally flexible aromatic N-protecting group for alanine and a hydrazide functionality at its carboxylic end. Ala-hyd requires mechanical agitation (physically stirring, vortexing or sonicating) to form supramolecular hydrogels at medium concentrations (0.4-0.8 wt%). At higher concentrations (>0.8 wt%), it spontaneously gelates water on undisturbed cooling of the hot solution, while at lower concentrations (<0.4 wt%), only turbid suspensions were formed upon agitation. In the <0.8 wt% regime, hydrogelation by Ala-hyd is modulated by its concentration as well as by the extent of applied mechanical agitation. Turbidimetry and fluorescence spectroscopy indicate enhanced self-assembly of Ala-hyd upon agitation, and FTIR studies point towards stronger hydrogen bonds in the resulting assemblies. Since Ala-hyd requires mechanical agitation to undergo self-assembly, its aqueous sols exhibited mild shear-thickening behaviour in buffered as well as salt-free conditions. During shearing, the formation of an entangled mesh of long, helical nanofibers coincided with the maximum in the bulk shear viscosity. pH-dependent rheological investigations indicate that protonation of the amine unit (pKa = 8.9) of hydrazide diminishes the self-assembly propensity of this compound. The self-assembly of Ala-hyd can thus be modulated through mechanical as well as chemical cues.

Self-assembly of short peptides to form hydrogels: design of building blocks, physical properties and technological applications

Hydrogels are unique supramolecular solid-like assemblies composed mainly of water molecules that are held by molecular networks. Physical hydrogels that are formed by a set of non-covalent interactions to establish a well-ordered scaffold devoid of any chemical cross-linking are especially intriguing for various biotechnological and medical applications. Peptides are particularly interesting building blocks of physical gels because of the role of polypeptides as structural elements in biological systems, the extensive ability for their chemical and biological decoration and functionalization, and the facile synthesis of natural and modified peptides. This review describes the assembly and properties of physical hydrogels that have been formed by the self-association of very simple peptide building blocks. Natural short peptides, as short as dipeptides, can form ordered gel assemblies. Moreover, in the case of N-terminal protection, even a protected amino acid can serve as an efficient hydrogelator. Further elucidation of hydrogelators' assembly, as well as the characterization of their physical properties, can guide the rational design of building blocks for a desired application. The possible mechanism of self-assembly is discussed in line with the chemical nature of the short peptides. Different methods have been used to induce hydrogel assembly, which may significantly affect the mechanical characteristics of the resulting gels. Here, special emphasis is given to methods that allow either spatial control of hydrogel formation or modulation of physical properties of the gel. Finally, the parameters that influence hydrogelation are described, and insights for their design are provided.

Phenylalanine-containing cyclic dipeptides--the lowest molecular weight hydrogelators based on unmodified proteinogenic amino acids

Cyclic dipeptides (diketopiperazines - DKPs) that are based on the proteinogenic amino acid phenylalanine in combination with serine, cysteine, glutamate, histidine and lysine are described as simple and remarkable low molecular weight hydrogelators. Blends of selected DKPs show remarkable pH-dependent properties and can be applied as easy to tune materials in drug delivery.

Mechanically induced gel formation

Mechanical triggering of gelation of an organic solution by a carbazole-based bisurea organogelator is described. Both the duration of the mechanical stimulation and the gelator concentration control the gelation process and the characteristics of the gel obtained.

Mechanical control of nanomaterials and nanosystems

In situations of power outage or shortage, such as periods just following a seismic disaster, the only reliable power source available is the most fundamental of forces i.e., manual mechanical stimuli. Although there are many macroscopic mechanical tools, mechanical control of nanomaterials and nanosystems has not been an easy subject to develop even by using advanced nanotechnological concepts. However, this challenge has now become a hot topic and many new ideas and strategies have been proposed recently. This report summarizes recent research examples of mechanical control of nanomaterials and nanosystems. Creation of macroscopic mechanical outputs by efficient accumulation of molecular-level phenomena is first briefly introduced. We will then introduce the main subject: control of molecular systems by macroscopic mechanical stimuli. The research described is categorized according to the respective areas of mechanical control of molecular structure, molecular orientation, molecular interaction including cleavage and healing, and biological and micron-level phenomena. Finally, we will introduce two more advanced approaches, namely, mechanical strategies for microdevice fabrication and mechanical control of molecular machines. As mechanical forces are much more reliable and widely applicable than other stimuli, we believe that development of mechanically responsive nanomaterials and nanosystems will make a significant contribution to fundamental improvements in our lifestyles and help to maintain and stabilize our society.