Self-Assembled Molecular Fibers Aligned by Compression in Water

Molecular self-assembly has attracted much attention as a potential approach for fabricating nanostructured functional materials. To date, energy-efficient fabrication of nano-objects such as nanofibers, nanorings, and nanotubes is achieved using well-designed self-assembling molecules. However, the application of molecular self-assembly to industrial manufacturing processes remains challenging because regulating the positions and directions of self-assembled products is difficult. Non-covalent molecular assemblies are also too fragile to allow mechanical handling. The present work demonstrates the macroscopic alignment of self-assembled molecular fibers using compression. Specifically, the macroscopic bundling of self-assembled nanofibers is achieved following dispersion in water. These fiber bundles can also be chemically crosslinked without drastic changes in morphology via trialkoxysilyl groups. Subsequently, vertically oriented porous membranes can be produced rapidly by slicing the bundles. This technique is expected to be applicable to various functional self-assembled fibers and can lead to the development of innovative methods of producing anisotropic nanostructured materials.

Thermally tunable selective formation of self-assembled fibers into two orthogonal directions in oriented liquid-crystalline smectic templates

Two orthogonal (grid-like) and one directional fibrous structures are selectively formed through anisotropic self-assembly of low-molecular-weight gelators in liquid-crystalline smectic A templates depending on thermally tuned layered structures.

The meniscus-guided deposition of semiconducting polymers

The electronic devices that play a vital role in our daily life are primarily based on silicon and are thus rigid, opaque, and relatively heavy. However, new electronics relying on polymer semiconductors are opening up new application spaces like stretchable and self-healing sensors and devices, and these can facilitate the integration of such devices into our homes, our clothing, and even our bodies. While there has been tremendous interest in such technologies, the widespread adoption of these organic electronics requires low-cost manufacturing techniques. Fortunately, the realization of organic electronics can take inspiration from a technology developed since the beginning of the Common Era: printing. This review addresses the critical issues and considerations in the printing methods for organic electronics, outlines the fundamental fluid mechanics, polymer physics, and deposition parameters involved in the fabrication process, and provides future research directions for the next generation of printed polymer electronics.

Liquid crystal templating as an approach to spatially and temporally organise soft matter

Liquid crystal templating: an emerging technique to organise and control soft matter at multiple length scales.

Directed peptide amphiphile assembly using aqueous liquid crystal templates in magnetic fields

An alignment technique based on the combination of magnetic fields and a liquid crystal (LC) template uses the advantages of both approaches: the magnetic fields offer non-contact methods that apply to all sample sizes and shapes, whilst the LC templates offer high susceptibilities. The combination introduces a route to control the spatial organization of materials with low intrinsic susceptibilities. We demonstrate that we can unidirectionally align one such material, peptide amphiphiles in water, on a centimeter scale at a tenfold lower magnetic field by using a lyotropic chromonic liquid crystal as a template. We can transform the aligned supramolecular assemblies into optically active π-conjugated polymers after photopolymerization. Lastly, by reducing the magnetic field strength needed for addressing these assemblies, we are able to create more complex structures by initiating self-assembly of our supramolecular materials under competing alignment forces between the magnetically induced alignment of the assemblies (with a positive diamagnetic anisotropy) and the elastic force dominated alignment of the template (with a negative diamagnetic anisotropy), which is directed orthogonally. Although the approach is still in its infancy and many critical parameters need optimization, we believe that it is a very promising technique to create tailor-made complex structures of (aqueous) functional soft matter.

Directing Soft Matter in Water Using Electric Fields

Directing the spatial organization of functional supramolecular and polymeric materials at larger length scales is essential for many biological and molecular optoelectronic applications. Although the application of electrical fields is one of the most powerful approaches to induce spatial control, it is rarely applied experimentally in aqueous solutions, since the low susceptibility of soft and biological materials requires the use of high fields, which leads to parasitic heating and electrochemical degradation. In this work, we demonstrate that we can apply electric fields when we use a mineral liquid crystal as a responsive template. Besides aligning and positioning functional soft matter, we show that the concentration of the liquid crystal template controls the morphology of the assembly. As our setup is very easy to operate and our approach lacks specific molecular interactions, we believe it will be applicable for a wide range of (aqueous) materials.

Alignment and Patterning of Ordered Small-Molecule Organic Semiconductor Micro-/Nanocrystals for Device Applications

Large-area alignment and patterning of small-molecule organic semiconductor micro-/nanocrystals (SMOSNs) at desired locations is a prerequisite for their practical device applications. Recent strategies for alignment and patterning of ordered SMOSNs and their corresponding device applications are highlighted.

Small molecular nanowire arrays assisted by superhydrophobic pillar-structured surfaces with high adhesion

Elaborately programmed fluorescent calcein nanowire arrays can be prepared with the aid of superhydrophobic pillar-structured surfaces with high adhesion. Each nanowire can be precisely positioned by well designed tip-structured micropillars, indicating an advance in the methodologies of controlling small molecular 1D organic nanostructures. The as-prepared fluorescent nanowire arrays can serve as a ferrous salt sensing device.

Synthetic scope, computational chemistry and mechanism of a base induced 5-endo cyclization of benzyl alkynyl sulfides

We present an experimental and computational study of the reaction of aryl substituted benzyl 1-alkynyl sulfides with potassium alkoxide in acetonitrile, which produces 2-aryl 2,3-dihydrothiophenes in poor to good yields. The cyclization is most efficient with electron withdrawing groups on the aromatic ring. Evidence indicates there is rapid exchange of protons and tautomerism of the alkynyl unit prior to cyclization. Theoretical calculations were also conducted to help rationalize the base induced 5-endo cyclization of benzyl 1-propynyl sulfide (1a). The potential energy surface was calculated for the formation of 2,3-dihydrothiophene in a reaction of benzyl 1-propynyl sulfide (1a) with potassium methoxide. Geometries were optimized with CAM-B3LYP/6-311+G(d,p) in acetonitrile with the CPCM solvent model. It is significant that the benzyl propa-1,2-dien-1-yl sulfane (6) possessed a lower benzylic proton affinity than the benzyl prop-2-yn-1-yl sulfane (8) thus favoring the base induced reaction of the former. From benzyl(propa-1,2-dien-1-yl sulfane (6), 2,3-dihydrothiophene can be formed via a conjugate base that undergoes 5-endo-trig cyclization followed by a protonation step.