Silver(I) complexes with voriconazole as promising anti-Candida agents

Recognizing that metal ions play an important role in modifying the pharmacological properties of known organic-based drugs, the present manuscript addresses the complexation of the antifungal agent voriconazole (vcz) with the biologically relevant silver(I) ion as a strategy for the development of new antimycotics. The synthesized silver(I) complexes with vcz were characterized by mass spectrometry, IR, UV-Vis and NMR spectroscopy and single-crystal X-ray diffraction analysis. The crystallographic results showed that complexes {[Ag(vcz)(H2O)]CH3SO3}n (1), {[Ag(vcz)2]BF4}n (2) and {[Ag(vcz)2]PF6}n (3) have polymeric structures in the solid state, in which silver(I) ions have a distorted tetrahedral geometry. On the other hand, DFT calculations revealed that the investigated silver(I) complexes 1-3 in DMSO exist as linear [Ag(vcz-N2)(vcz-N19)]+ (1a), [Ag(vcz-N2)(vcz-N4)]+ (2a) and [Ag(vcz-N4)2]+ (3a) species, respectively. The evaluated complexes showed an enhanced anti-Candida activity compared to the parent drug with minimal inhibitory concentration (MIC) values in the range of 0.02-1.05 μM. In comparison with vcz, the corresponding silver(I) complexes showed better activity in prevention hyphae and biofilm formation of C. albicans, indicating that they could be considered as promising agents against Candida that significantly inhibit its virulence. Also, these complexes are much better inhibitors of ergosterol synthesis in the cell membrane of C. albicans at the concentration of 0.5 × MIC. This is also confirmed by a molecular docking, which revealed that complexes 1a - 3a showed better inhibitory activity than vcz against the sterol 14α-demethylase enzyme cytochrome P450 (CYP51B), which plays a crucial role in the formation of ergosterol.

Synthesis of a Family of Pd(II) Complexes Using Pyridyl-Ketone Ligands: Crystal Structure, Thermal, Physicochemical, XRD/HSA, Docking, and Heck Reaction Application

Four Pd(II) complexes, (dpk)PdCl2 (complex-1), and (dpk)Pd(OAc)2 (complex-2) have been prepared using di(2-pyridyl) ketone as the chelate ligand (dpk). The (dpk·EtOH)PdCl2 (complex-3) and (dpk·EtOH)Pd(OAc)2 (complex-4) were synthesized by selectively introducing complex-1 and complex-2 to an EtOH in situ nucleophilic addition reaction on the O=C of the dpk ligand, respectively. All complexes were characterized using CHN-EA, UV-vis, FT-IR, FAB-MS, EDX, TGA, and NMR physicochemical tools. The XRD-crystallography technique was employed to ascertain the structure of complex-3. The analysis revealed a monoclinic/P21/c crystal system characterized by a square planar structure oriented in the cis direction around the Pd center. Several C-H···Cl and O-H···O H-bonds constructing 2D-S12 and S7 synthons were confirmed via XRD/HSA interactions. The influence of EtOH addition to the O=C group of dpk in (dpk)PdCl2 was documented by using UV-vis/FT-IR spectra and TGA analysis. As catalysts, all complexes have demonstrated a notable catalytic function in the Heck reaction, resulting in a high yield under gentle conditions using iodobenzene and methyl acrylate as model reactions. Moreover, the complex-1 and complex-3 docking activity was evaluated against 1BNA-DNA.

Interface Nuclei in the Y-Ag-Zn System: Three Chemical Pressure-Templated Phases with Lamellar Mg2Zn11- and CaPd5+x-Type Domains

The interface nucleus approach was recently presented as a framework for understanding and predicting the emergence of modular intermetallic phases, i.e., complex structures derived from the assembly of units from simpler parent structures. Here, we present the synthesis and crystal structures of three new modular intermetallics in the Y-Ag-Zn system that support this strategy: YAg2.79Zn2.80 (I), YAg2.44Zn3.17 (II), and YAg2.71Zn2.71 (III). Each of these structures is derived from an intergrowth of slabs of the Mg2Zn11 and CaPd5+x types, with the chief differences being in the thickness and degree of disorder within the CaPd5+x-type domains. The merging of the parent structure domains is facilitated by their sharing a common geometrical unit, a double hexagonal antiprism. The use of this motif as an interface nucleus mirrors its role in another family of structures: an intergrowth series combining the CaCu5 and Laves phase structure types, as in the PuNi3-type phase YNi3. However, there is a key difference between the two series. While in the CaCu5/Laves intergrowths, the interface between the parent structures arises perpendicular to the interface nucleus's unique (hexagonal) axis, in the Mg2Zn11/CaPd5+x-type intergrowths revealed here, the interfaces run parallel to this axis. Using CP analysis of the Mg2Zn11/CaPd5+x-type parent structures, we trace this behavior to the different directions of high-CP compatibility of the interface nuclei in the Mg2Zn11/CaPd5+x and CaCu5/Laves structure type pairs. In this way, the Y(Ag/Zn)5+x phases highlight the role that interface nuclei play in directing the domain morphologies of modular intermetallic phases.

A new 1D Mn(II) coordination polymer: Synthesis, crystal structure, hirshfeld surface analysis and molecular docking studies

The synthesis of novel metal-organic coordination polymers (MOCP) with the chemical formula [Mn2L (SCN)2(OH)2]3·CH3OH [L = 1,5-bis(pyridine-4-ylmethylene) carbonohydrazide] {1} was accomplished using two different techniques: solvothermal and sonochemical ultrasonic-assisted. An investigation was carried out to examine the impact of various factors such as reaction time, sonication power, temperature, and reactant concentration on the morphology and size of the crystals. Interestingly, it was found that sonication power and temperature did not affect the crystals' morphology and size. To further analyze the prepared microcrystals of MOCPs, SEM was utilized to examine their surface morphology, and XRD, elemental evaluation composition. The identification of the functional groups present in the prepared Mn-MOCPs was accomplished through the utilization of FT-IR spectroscopy. Subsequently, the calcination of 1 in an air atmosphere at 650 °C led to the formation of Mn3O4 nanoparticles. The geometric and electronic structure of the MOCPs was evaluated using density functional theory (DFT). The utilization of molecular docking methodologies demonstrated that the best cavity of the human androgen receptor possessed an interaction energy of -116.3 kJ mol-1. This energy encompassed a combination of both bonding and non-bonding interactions. The Results showed that steric interaction and electrostatic potential are the main interactions in AR polymer and Mn(II). These interactions in the defined cavity indicated that this polymer could be an effective anti-prostate candidate, because AR is involved in the growth of prostate cancer cells, and these interactions indicated the inhibition of prostate cancer cell growth.

Biomedical application of metal-organic frameworks (MOFs) in cancer therapy: Stimuli-responsive and biomimetic nanocomposites in targeted delivery, phototherapy and diagnosis

The nanotechnology is an interdisciplinary field that has become a hot topic in cancer therapy. Metal-organic frameworks (MOFs) are porous materials and hybrid composites consisted of organic linkers and metal cations. Despite the wide application of MOFs in other fields, the potential of MOFs for purpose of cancer therapy has been revealed by the recent studies. High surface area and porosity, significant drug loading and encapsulation efficiency are among the benefits of using MOFs in drug delivery. MOFs can deliver genes/drugs with selective targeting of tumor cells that can be achieved through functionalization with ligands. The photosensitizers and photo-responsive nanostructures including carbon dots and gold nanoparticles can be loaded in/on MOFs to cause phototherapy-mediated tumor ablation. The immunogenic cell death induction and increased infiltration of cytotoxic CD8+ and CD4+ T cells can be accelerated by MOF platforms in providing immunotherapy of tumor cells. The stimuli-responsive MOF platforms responsive to pH, redox, enzyme and ion can accelerate release of therapeutics in tumor site. Moreover, MOF nanocomposites can be modified ligands and green polymers to improve their selectivity and biocompatibility for cancer therapy. The application of MOFs for the detection of cancer-related biomarkers can participate in the early diagnosis of patients.

Transition mechanism of the coverage-dependent polymorphism of self-assembled melamine nanostructures on Au(111)

Molecular self-assembled films have recently attracted increasing attention within the field of nanotechnology as they offer a route to obtain new materials. However, careful selection of the molecular precursors and substrates, as well as exhaustive control of the system evolution is required to obtain the best possible outcome. The three-fold rotational symmetry of melamine molecules and their capability to form hydrogen bonds make them suitable candidates to synthesize this type of self-assembled network. In this work, we have studied the polymorphism of melamine nanostructures on Au(111) at room temperature. We find two coverage-dependent phases: a honeycomb structure (α-phase) for submonolayer coverage and a close-packed structure (β-phase) for full monolayer coverage. A combined scanning tunnel microscopy and density functional theory based-calculations study of the transition regime where both phases coexist allows describing the mechanism underlying this coverage driven phase transition in terms of the changes in the molecular lateral tension.

Crystal Engineering of a New Hexafluorogermanate Pillared Hybrid Ultramicroporous Material Delivers Enhanced Acetylene Selectivity

Hybrid ultramicroporous materials (HUMs), metal-organic platforms that incorporate inorganic pillars, are a promising class of porous solids. A key area of interest for such materials is gas separation, where HUMs have already established benchmark performances. Thanks to their ready compositional modularity, we report the design and synthesis of a new HUM, GEFSIX-21-Cu, incorporating the ligand pypz (4-(3,5-dimethyl-1H-pyrazol-4-yl)pyridine, 21) and GeF62- pillaring anions. GEFSIX-21-Cu delivers on two fronts: first, it displays an exceptionally high C2H2 adsorption capacity (≥5 mmol g-1) which is paired with low uptake of CO2 (<2 mmol g-1), and, second, a low enthalpy of adsorption for C2H2 (ca. 32 kJ mol-1). This combination is rarely seen in the C2H2 selective physisorbents reported thus far, and not observed in related isostructural HUMs featuring pypz and other pillaring anions. Dynamic column breakthrough experiments for 1:1 and 2:1 C2H2/CO2 mixtures revealed GEFSIX-21-Cu to selectively separate C2H2 from CO2, yielding ≥99.99% CO2 effluent purities. Temperature-programmed desorption experiments revealed full sorbent regeneration in <35 min at 60 °C, reinforcing HUMs as potentially technologically relevant materials for strategic gas separations.

Physical binding energies using the electron localization function in 4-hydroxyphenylboronic acid co-crystals with aza donors

Binding energies are traditionally simulated using cluster models by computation of each synthon for each individual co-crystal former. However, our investigation of the binding strengths using the electron localization function (ELF) reveals that these can be determined directly from the crystal supercell computations. We propose a new modeling protocol for the computation of physical binding energies directly from bulk simulations using ELF analysis. In this work, we establish a correlation between ELF values and binding energies calculated for co-crystals of 4-hydroxyphenylboronic acid (4HPBA) with four different aza donors using density functional theory with varying descriptions of dispersion. Boronic acids are gaining significant interest in the field of crystal engineering, but theoretical studies on their use in materials are still very limited. Here, we present a systematic investigation of the non-covalent interactions in experimentally realized co-crystals. Prior diffraction studies on these complexes have shown the competitive nature between the boronic acid functional group and the para-substituted phenolic group forming heteromeric interactions with aza donors. We determine the stability of the co-crystals by simulating their lattice energies, and the different dispersion descriptions show similar trends in lattice energies and lattice parameters. Our study bolsters the experimental observation of the boronic acid group as a competitive co-crystal former in addition to the well-studied phenolic group. Further research on correlating ELF values for physical binding could potentially transform this approach to a viable alternative for the computation of binding energies.

Hydrogen-Bonding Trends in a Bithiophene with 3- and/or 4-Pyridyl Substituents

To improve the charge-carrier transport capabilities of thin-film organic materials, the intermolecular electronic couplings in the material should be maximized. Decreasing intermolecular distance while maintaining proper orbital overlap in highly conjugated aromatic molecules has so far been a successful way to increase electronic coupling. We attempted to decrease the intermolecular distance in this study by synthesizing cocrystals of simple benzoic acid coformers and dipyridyl-2,2'-bithiophene molecules to understand how the coformer identity and pyridine N atom placement affected solid-state properties. We found that with the 5-(3-pyridyl)-5'-(4-pyridyl)-isomer, the 4-pyridyl ring interacted with electrophiles and protons more strongly. Synthesized cocrystal powders were found to have reduced average crystallite size in reference to the parent compounds. The opposite was found for the intermolecular electronic couplings, as determined via density functional theory (DFT) calculations, which were relatively large in some of the cocrystals.

Two-Dimensional Self-Assembly Driven by Intermolecular Hydrogen Bonding in Benzodi-7-azaindole Molecules on Au(111)

The control of molecular structures at the nanoscale plays a critical role in the development of materials and applications. The adsorption of a polyheteroaromatic molecule with hydrogen bond donor and acceptor sites integrated in the conjugated structure itself, namely, benzodi-7-azaindole (BDAI), has been studied on Au(111). Intermolecular hydrogen bonding determines the formation of highly organized linear structures where surface chirality, resulting from the 2D confinement of the centrosymmetric molecules, is observed. Moreover, the structural features of the BDAI molecule lead to the formation of two differentiated arrangements with extended brick-wall and herringbone packing. A comprehensive experimental study that combines scanning tunneling microscopy, high-resolution X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and density functional theory theoretical calculations has been performed to fully characterize the 2D hydrogen-bonded domains and the on-surface thermal stability of the physisorbed material.

Aryl Boronic Acids in Columnar Stacked Co-crystalline Materials: Key-Factors Governing the Assembly with Quinones

The assembly of aryl boronic acids B with quinones Q into columnar mixed stacked materials, as previously observed in the solid-state, has been here subjected to a detailed theoretical analysis focusing on the properties of the isolated synthons (HOMO-LUMO energies, electron affinity, ionization potential, reorganization hole/electron energies, partial Hirshfeld atomic charges and conformation stabilities) as well as those of the 1 : 1 adducts (Hirshfeld analysis, IRI surfaces, Hirshfeld atomic charges, hydrogen bond and slipped stacked π-π contributions). The overall picture obtained throught this study shows an intricate pattern of interconnected factors contributing to the formation and stability of the B_x Q_y adducts, and it unveils the importance of parameters such as HOMO-LUMO gap, polarization and charge transfer, in addition to the more evident hydrogen bond and slipped-stacked π-π interactions in the formation of 1 : 1 adducts. An explanation has been also given for the presence in some B_x Q_y adducts of the rare anti-anti conformation for the BO-H group with respect to the most studied and common anti-syn conformation.

Shedding Light on the Vibrational Signatures in Halogen-Bonded Graphitic Carbon Nitride Building Blocks

The relative contributions of halogen and hydrogen bonding to the interaction between graphitic carbon nitride monomers and halogen bond (XB) donors containing C-X and C≡C bonds were evaluated using computational vibrational spectroscopy. Conventional probes into select vibrational stretching frequencies can often lead to disconnected results. To elucidate this behavior, local mode analyses were performed on the XB donors and complexes identified previously at the M06-2X/aVDZ-PP level of theory. Due to coupling between low and high energy C-X vibrations, the C≡C stretch is deemed a better candidate when analyzing XB complex properties or detecting XB formation. The local force constants support this conclusion, as the C≡C values correlate much better with the σ-hole magnitude than their C-X counterparts. The intermolecular local stretching force constants were also assessed, and it was found that attractive forces other than halogen bonding play a supporting role in complex formation.

Crystal Engineering and Photomagnetic Studies of CN-Bridged Coordination Polymers Based on Octacyanidometallates(IV) and [Ni(cyclam)]2

A series of new CN-bridged coordination networks of different dimensionality and topology was obtained through the modification of reaction conditions between [Ni(cyclam)]²⁺ (cyclam = 1,4,8,11-tetraazacyclotetradecane) and [W(CN)₈]^4–. The factors determining the reaction pathway are temperature and addition of the LiCl electrolyte. The products include three negatively charged frameworks incorporating Li⁺ guests: the 1D Li₂[Ni(cyclam)][W(CN)₈]·6H₂O (1) straight chain, the 1D Li₂[Ni(cyclam)][W(CN)₈]·2H₂O (2) zigzag chain, and the 2D Li₂[Ni(cyclam)]₃[W(CN)₈]₂·24H₂O (3) honeycomb-like network, as well as the 3D two-fold interpenetrating [Ni(cyclam)]₅[Ni(CN)₄][W(CN)₈]₂·11H₂O (4) network and the 1D [Ni(cyclam)][Ni(CN)₄]·2H₂O (5) chain, which result from partial decomposition of the starting complexes. Together with the previously characterized 3D [Ni(cyclam)]₂[W(CN)₈]·16H₂O (6) network, they constitute the largest family of CN-bridged coordination polymers obtained from the same pair of building blocks. All compounds exhibit paramagnetic behavior because of the separation of paramagnetic nickel(II) centers through the diamagnetic polycyanidometallates. However, the presence of the photomagnetically active octacyanidotungstate(IV) ions allowed observation of the magnetic superexchange after the violet light excitation (405 nm) for compound 3, which constitutes the first example of the photomagnetic effect in a Ni^II–[W^IV(CN)₈] system. The photomagnetic investigations for fully hydrated and dehydrated sample of 3, as well as for the isostructural octacyanidomolybdate(IV)-based network are discussed.

Six coordination networks of different dimensionality and topology can be obtained from the same pair of building blocks: [Ni(cyclam)]²⁺ and [W(CN)₈]⁴⁻ depending on reaction conditions. The negatively charged 2D Li₂[Ni(cyclam)]₃[W(CN)₈]₂·nH₂O microporous network is the first example of the photomagnetic effect in a Ni^II−[W^IV(CN)₈] system.

Pharmaceutical Cocrystals of Ethenzamide: Molecular Structure Analysis Based on Vibrational Spectra and DFT Calculations

Pharmaceutical cocrystals can offer another advanced strategy for drug preparation and development and can facilitate improvements to the physicochemical properties of active pharmaceutical ingredients (APIs) without altering their chemical structures and corresponding pharmacological activities. Therefore, cocrystals show a great deal of potential in the development and research of drugs. In this work, pharmaceutical cocrystals of ethenzamide (ETZ) with 2,6-dihydroxybenzoic acid (26DHBA), 2,4-dihydroxybenzoic acid (24DHBA) and gallic acid (GA) were synthesized by the solvent evaporation method. In order to gain a deeper understanding of the structural changes after ETZ cocrystallization, terahertz time domain spectroscopy (THz-TDS) and Raman spectroscopy were used to characterize the single starting samples, corresponding physical mixtures and the cocrystals. In addition, the possible molecular structures of ETZ-GA, ETZ-26DHBA and ETZ-24DHBA cocrystals were optimized by density functional theory (DFT). The results of THz and Raman spectra with the DFT simulations for the three cocrystals revealed that the ETZ-GA cocrystal formed an O−H∙∙∙O hydrogen bond between the -OH of GA and oxygen of the amide group of the ETZ molecule, and it was also found that ETZ formed a dimer through a supramolecular amide–amide homosynthon; meanwhile, the ETZ-26DHBA cocrystal was formed by a powerful supramolecular acid–amide heterosynthon, and the ETZ-24DHBA cocrystal formed the O−H∙∙∙O hydrogen bond between the 4-hydroxy group of 24DHBA and oxygen of the amide group of the ETZ molecule. It could be seen that in the molecular structure analysis of the three cocrystals, the position and number of hydroxyl groups in the coformers play an essential role in guiding the formation of specific supramolecular synthons.

Weaving a 2D net of hydrogen and halogen bonds: cocrystal of a pyrazolium bromide with tetrafluorodiiodobenzene

Hydrohalides of Lewis bases may act as halogen bond (XB) acceptors and combine two directional interactions, namely, hydrogen bonds (HB) and XBs in the same solid. 3-(1,3,5-Trimethyl-1H-pyrazol-4-yl)acetylacetone (C11H16N2O2, HacacMePz) was protonated with HX (X = Cl or Br) to afford the hydrohalides, C11H17N2O2 +·X − or H2acacMePz+·X − (1, X = Cl; 2, X = Br). Hydrohalides 1 and 2 are isomorphous and adopt a classical dipole packing. Consistent with the observation for most β-diketones, the enol form with an intramolecular HB is observed. Additional noteworthy interactions are HBs of the protonated pyrazolium towards the X − anion at donor–acceptor distances of 2.9671 (17) Å for 1 and 3.159 (4) Å for 2. Cocrystallization of hydrobromide 2 with the XB donor tetrafluorodiiodobenzene (TFDIB) leads to the adduct C11H17N2O2 +·Br−·0.5C6F4I2·H2O or (H2acacMePz+·Br−)2·(H2O)2·TFDIB (3), in which the XB donor TFDIB is situated on a crystallographic centre of inversion. Classical HBs link organic cations, water molecules and Br− anions into chains along [010]. Almost orthogonal to this interaction, XBs with Br...I = 3.2956 (4) Å connect neighbouring chains along [102] into two-dimensional sheets in the (10\overline{2}) plane. Assisted by their negative charge, halide anions represent particularly good nucleophiles towards XB donors.

Experimental and Hirshfeld Surface Investigations for Unexpected Aminophenazone Cocrystal Formation under Thiourea Reaction Conditions via Possible Enamine Assisted Rearrangement

Considering the astounding biomedicine properties of pharmaceutically active drug, 4-aminophenazone, also known as 4-aminoantipyrine, the work reported in this manuscript details the formation of novel cocrystals of rearranged 4-aminophenazone and 4-nitro-N-(4-nitrobenzoyl) benzamide in 1:1 stoichiometry under employed conditions for thiourea synthesis by exploiting the use of its active amino component. However, detailed analysis via various characterization techniques such as FT-IR, nuclear magnetic resonance spectroscopy and single crystal XRD, for this unforeseen, but useful cocrystalline synthetic adduct (4 and 5) prompted us to delve into its mechanistic pathway under provided reaction conditions. The coformer 4-nitro-N-(4-nitrobenzoyl) benzamide originates via nucleophilic addition reaction following tetrahedral mechanism between para-nitro substituted benzoyl amide and its acid halide (1). While the enamine nucleophilic addition reaction by 4-aminophenazone on 4-nitrosubstituted aroyl isothiocyanates under reflux temperature suggests the emergence of rearranged counterpart of cocrystal named N-(1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazole-4-carbonothioyl)-4-nitrobenzamide. Crystallographic studies reveal triclinic system P-1 space group for cocrystal (4 and 5) and depicts two different crystallographically independent molecules with prominent C–H···O and N–H···O hydrogen bonding effective for structure stabilization. Hirshfeld surface analysis also displays hydrogen bonding and van der Waals interactions as dominant interactions in crystal packing. Further insight into the cocrystal synthetic methodologies supported the occurrence of solution-based evaporation/cocrystallization methodology in our case during purification step, promoting the synthesis of this first-ever reported novel cocrystal of 4-aminophenazone with promising future application in medicinal industry.

Structural properties of [Cu(II)3L6] cages: bridged polyatomic anion effects on unprecedented efficiency of heterogeneous catechol oxidation

Self-assembly of CuX₂ (X^- = BF₄^-, ClO₄^-, PF₆^-, and SbF₆^-) with a bidentate ethylmethylbis(3-pyridine)silane ligand (L) in the presence of additional polyatomic anions (X' = SiF₆^2- and PF₆^-) gives rise to single crystals consisting of the X'@[Cu(II)₃L₆] cage motif. These cages exist as discrete or anion-bridged 3D networks depending on outside anions. The anion-bridged 3D networks interpenetrate in a four-fold fashion, and show, to our best knowledge, the most effective heterogeneous catalysis in 3,5-di-tert-butylcatechol oxidation reaction within 20 min at room temperature. Surprisingly, the heterogeneous catalysis is more effective than its corresponding homogeneous catalysis. Such notable catalytic effects can be explained by the maintenance of 3D inter-cage Cu⋯Cu distance as a catalytic center.

Rapid Generation of Metal-Organic Framework Phase Diagrams by High-Throughput Transmission Electron Microscopy

Metal-organic frameworks (MOFs) constructed from Zr₆ nodes and tetratopic carboxylate linkers display high structural diversity and complexity in which various crystal topologies can result from identical building units. To determine correlations between MOF topologies and experimental parameters, such as solvent choice or modulator identity and concentration, we demonstrate the rapid generation of phase diagrams for Zr₆-MOFs with 1,4-dibromo-2,3,5,6-tetrakis(4-carboxyphenyl)benzene linkers under a variety of conditions. We have developed a full set of methods for high-throughput transmission electron microscopy (TEM), including automated sample preparation and data acquisition, to accelerate MOF characterization. The use of acetic acid as a modulator yields amorphous, NU-906, NU-600, and mixed-phase structures depending on the ratio of N,N-dimethylformamide to N,N-diethylformamide solvent and the quantity of the modulator. Notably, the use of formic acid as a modulator enables direct control of crystal growth along the c direction through variation of the modulator quantity, thus realizing aspect ratio control of NU-1008 crystals with different catalytic hydrolysis performance toward a nerve agent simulant.

Structural Characterization of Multicomponent Crystals Formed from Diclofenac and Acridines

Multicomponent crystals containing diclofenac and acridine (1) and diclofenac and 6,9-diamino-2-ethoxyacridine (2) were synthesized and structurally characterized. The single-crystal XRD measurements showed that compound 1 crystallizes in the triclinic P-1 space group as a salt cocrystal with one acridinium cation, one diclofenac anion, and one diclofenac molecule in the asymmetric unit, whereas compound 2 crystallizes in the triclinic P-1 space group as an ethanol solvate monohydrate salt with one 6,9-diamino-2-ethoxyacridinium cation, one diclofenac anion, one ethanol molecule, and one water molecule in the asymmetric unit. In the crystals of the title compounds, diclofenac and acridines ions and solvent molecules interact via N–H⋯O, O–H⋯O, and C–H⋯O hydrogen bonds, as well as C–H⋯π and π–π interactions, and form heterotetramer bis[⋯cation⋯anion⋯] (1) or heterohexamer bis[⋯cation⋯ethanol⋯anion⋯] (2). Moreover, in the crystal of compound 1, acridine cations and diclofenac anions interact via N–H⋯O hydrogen bond, C–H⋯π and π–π interactions to produce blocks, while diclofenac molecules interact via C–Cl⋯π interactions to form columns. In the crystal of compound 2, the ethacridine cations interact via C–H⋯π and π–π interactions building blocks, while diclofenac anions interact via π–π interactions to form columns.

Conservation of the Hydrogen-Bonded Pyridone Homosynthon in Halogen-Bonded Cocrystals

Seven cocrystals of pyridone and perfluorinated halocarbons have been prepared. In all cases pairs of pyridone molecules are connected into dimers by two N-H···O hydrogen bonds, forming the characteristic pyridone homosynthon of R₂ ²(8) topology. These dimers further act as acceptors of halogen bonds through the two pyridone oxygen atoms, forming two (in six cases) or three (in one case) halogen bonds with the donor molecules. The stoichiometry of the cocrystals obtained and the overall topology of the supramolecular architecture depend primarily on the topicity of the halogen bond donor, with the monotopic donor yielding a cocrystal of 1:1 stoichiometry comprising discrete supramolecular complexes, the ditopic donors cocrystals of 1:2 stoichiometry comprising chains, and the tritopic donor a cocrystal of 1:2 stoichiometry comprising hydrogen- and halogen-bonded layers. The results indicate that the pyridone homosynthon is a robust and reliable supramolecular synthon that is conserved in halogen-bonded cocrystals of pyridone.

Isostructural Halogen Exchange and Halogen Bonds: The Case of N-(4-Halogenobenzyl)-3-halogenopyridinium Halogenides

Six N-(4-halogenobenzyl)-3-halogenopyridinium cations were prepared by reacting meta-halogenopyridines (Cl, Br, and I) with (4-halogenobenzyl) bromides (Br and I) and were isolated as bromide salts, which were further used to obtain iodides and chlorides. Sixteen compounds (out of 18 possible cation/anion combinations) were obtained; two crystallized as hydrates and 14 as solvent free salts, 11 of which belonged to one isostructural series and 3 to another. All crystal structures comprise halogen-bonded chains, with the anion as an acceptor of two halogen bonds, with the pyridine and the benzyl halogen substituents of two neighboring cations. The halogen bonds with the pyridine halogen show a linear correlation between the relative halogen bond length and angle, which primarily depend on the donor halogen. The parameters of the other halogen bonds vary with all three halogens, indicating that the former halogen bond is the dominant interaction. This is also in accord with the calculated electrostatic potential in the σ-holes of the halogens and the thermal properties of the solids. The second isostructural group comprises combinations of the best halogen bond donors and acceptors, and features a more favorable halogen bond geometry of the dominant halogen bond, reaffirming its significance as the main factor in determining the structure.

Ligand-Driven Self-Assembly of Iodine-Based Cd(II) Complexes via Dissolution-Recrystallization Structural Transformation

The iodo-cadmium(II) complexes with a diversity of crystalline architectures have been prepared via a combination of a Cd(II) precursor and varied iodine solutions. The iodo-Cd(II) complexes with 1,10-phenantroline were assembled...

Structure directing roles of weak noncovalent interactions and charge-assisted hydrogen bonds in the self-assembly of solvated podands: Example of an anion-assisted dimeric water capsule

Crystal structures of two new podand molecules (1 and 2) synthesized from 1,3,5-tris(bromomethyl)mesitylene and two bromide salts of tris(4-amino-N-ethylbenzamide)amine (3) were elucidated to witness the structure directing roles of weak...

A new cotton functionalized with iron(III) trimer-like metal framework as an effective strategy for the adsorption of triarylmethane dye: An insight into the dye adsorption processes

A new Cotton@Fe-BTC composite formed by Fe-BTC (BTC-H3: trimesic acid) metal framework (Fe-BTC MOF loading as high 38 wt %) supported by cellulose fiber is synthesized in aqueous media using a simple and green preparation method, described for the first time in this manuscript. This new strategy relies on the synergetic effect of the pure cellulose and MOFs frameworks resulting in hybrid nanofibers of MOFs@cellulose composite. A complete characterization of the composite material reveals its structural similarity to MIL-100(Fe), a Fe-BTC material. The Cotton@Fe-BTC composite potential use as an eco-friendly and low-cost adsorbent was evaluated for its adsorptive performance for the removal of dye belonging to the triarylmethane dye family (Malachite Green (MQ), Brilliant Green (BG), Pararosaniline (PR), Basic Fuchsine (BF), Crystal Violet (CV), Methyl Green (Met-G), Victoria Blue B (VB), Acid Fuchsin (AF) and Aniline Blue (AB)) in aqueous solution. The fast kinetics and high dye removal efficiencies (>90%) obtained in aqueous solutions. The structure of Cotton@Fe-BTC network, contributed to the remarkable adsorption properties towards a variety of triphenylmethanedye. The interparticle studies showed two main steps in the dye adsorption processes, with the exception of AF and BG. The equilibrium adsorption capacities qe (mg/g) follow the order: AF (3.64) Collapse

Key Words

• Adsorption
• Fe-BTC
• Natural cotton
• Solvation/desolvation penalty processes
• Triphenylmetane dye
• Water

Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

J.E. Conde-González Departamento de Química, Unidad Departamental de Química Analítica, Facultad de Ciencias, Universidad de La Laguna, Tenerife, Spain
P. Lorenzo-Luis Inorganic Chemistry Area, Section of Chemistry Faculty of Science, Tenerife, Spain Instituto Universitario de Bio-Orgánica “Antonio González”, University of La Laguna, Tenerife, Spain
V. Salvadó Department de Química, Facultat de Ciències, Universitat de Girona, C/ M Aurèlia Capmany, 69, 17003 Girona, Spain
J. Havel Department of Chemistry, Faculty of Science, Masaryk University, Kamenice 5/A14, 625 00 Brno, Czech Republic
E.M. Peña-Méndez Departamento de Química, Unidad Departamental de Química Analítica, Facultad de Ciencias, Universidad de La Laguna, Tenerife, Spain

Collapse

Crystal structure of 4,5-diiodo-1,3-dimesityl-1H-1,2,3-triazol-3-ium chloride – chloroform (1/1), C21H23Cl4I2N3

C21H23Cl4I2N3, monoclinic, P21/c (no. 14), a = 26.110(2) Å, b = 9.1149(8) Å, c = 33.793(3) Å, β = 134.138(3)°, V = 5771.8(9) Å3, Z = 8, R gt (F) = 0.0624, wRref (F 2) = 0.1525, T = 297.93 K.

Post-synthetically modified metal-organic frameworks for sensing and capture of water pollutants

Thanks to a bottom-up design of metals and organic ligands, the library of metal-organic frameworks (MOFs) has seen a conspicuous growth. Post-synthetically modified MOFs comprise a relatively smaller subset of this library. Whereas the approach of post-synthetic modification was seminally introduced for MOFs in the early 1990s, the earliest examples of post-synthetically modified MOFs are only congruous with adsorption and catalysis. The utility of PSM-derived MOFs for the sensing and capture of water contaminants is relatively niche. Arguably though, an increasing number of post-synthetically modified MOFs are finding relevance in the context of water pollutant remediation. In this article, we review the recent advances in this area and propose a structure-function relationship-guided blueprint for the future outlook.

The Balance between Hydrogen Bonds, Halogen Bonds, and Chalcogen Bonds in the Crystal Structures of a Series of 1,3,4-Chalcogenadiazoles

In order to explore how specific atom-to-atom replacements change the electrostatic potentials on 1,3,4-chalcogenadiazole derivatives, and to deliberately alter the balance between intermolecular interactions, four target molecules were synthesized and characterized. DFT calculations indicated that the atom-to-atom substitution of Br with I, and S with Se enhanced the σ-hole potentials, thus increasing the structure directing ability of halogen bonds and chalcogen bonds as compared to intermolecular hydrogen bonding. The delicate balance between these intermolecular forces was further underlined by the formation of two polymorphs of 5-(4-iodophenyl)-1,3,4-thiadiazol-2-amine; Form I displayed all three interactions while Form II only showed hydrogen and chalcogen bonding. The results emphasize that the deliberate alterations of the electrostatic potential on polarizable atoms can cause specific and deliberate changes to the main synthons and subsequent assemblies in the structures of this family of compounds.

The "Chemistree" of Porous Coordination Networks: Taxonomic Classification of Porous Solids to Guide Crystal Engineering Studies

New approaches to gas/vapor storage and purification are urgently needed to address the large energy footprint, cost, and/or risk associated with existing technologies. In this context, new classes of porous physisorbents, exemplified by porous coordination networks (PCNs), have emerged. There are now >100 000 entries in the Cambridge Structural Database (CSD) metal-organic framework (MOF) subset and the rate of publication, >5000 per year, grows unabatedly. The number of PCNs makes it infeasible to test all of them for sorption performance and it is therefore timely to introduce a classification approach based upon taxonomy to supplement topological classification of PCNs. This taxonomic approach complements existing databases such as the CSD and enable the design (crystal engineering) of new families of PCNs. It also categorizes existing PCNs in a manner useful to crystal engineers. The internal consistency of the taxonomic approach is verified by case studies of several well-known PCNs whereas its utility is demonstrated upon understudied topologies and hard-to-rationalize infinite rod building blocks. Overall, taxonomic classification enables a traffic light system to direct crystal engineers towards finding a "needle in haystack," that is, a family (platform) of PCNs that is amenable to crystal engineering and systematic structure/property studies.