The Role of Light Irradiation and Dendrimer Generation in Directing Electrostatic Self-Assembly

pH-responsive polyamidoamine (PAMAM) dendrimers are used as well-defined building blocks to design light-switchable nano-assemblies in solution. The complex interplay between the photoresponsive di-anionic azo dye Acid Yellow 38 (AY38) and the cationic PAMAM dendrimers of different generations is presented in this study. Electrostatic self-assembly involving secondary dipole-dipole interactions provides well-defined assemblies within a broad size range (10 nm-1 μm) with various shapes. The size and shape of these assemblies were determined using dynamic and static light scattering (DLS/SLS) and small-angle neutron scattering (SANS); ζ-potential measurements were performed to elucidate the charge characteristics, revealing the effective surface charge density of the nano-objects as an important parameter in the size and shape control. UV-vis spectroscopy and isothermal titration calorimetry (ITC) were employed to investigate the interaction on a molecular level and from a thermodynamic point of view. The results show that the amount of isomerized cis dye depends on the dendrimer generation because of a photoprotective effect through electrostatics for lower generations and through dipole-dipole interactions for higher generations; as the cis dye and trans dye bind with different strength, the amount of cis dye then again encodes the charge density and thereby the particle size and shape.

Living Supramolecular Polymerization of an Aza-BODIPY Dye Controlled by a Hydrogen-Bond-Accepting Triazole Unit Introduced by Click Chemistry

An aza-BODIPY dye 1 bearing two hydrophobic fan-shaped tridodecyloxybenzamide pendants through 1,2,3-triazole linkages was synthesized by a click reaction and characterized. ¹ H NMR studies indicated that dye 1 exhibited variable conformations through intramolecular H-bonding interaction, which is beneficial for the polymorphism of aggregation. The thermodynamic, structural, and kinetic aspect of the supramolecular polymerization of dye 1 was investigated by UV/Vis absorption spectroscopy, IR spectroscopy, AFM, TEM, and SEM. Biphasic aggregation pathways of dye 1, leads to the formation of off-pathway, metastable Agg. I and thermodynamically stable Agg. II with distinct H-aggregation spectra and nanoscale morphology. The living manner of the supramolecular polymerization of dye 1 was demonstrated in seeded polymerization experiments with temperature-modulated successive cooling-heating cycles.

Bispyrene-Based Self-Assembled Nanomaterials: In Vivo Self-Assembly, Transformation, and Biomedical Effects

Self-assembled nanomaterials show potential high efficiency as theranostic agents for high-performance imaging and therapy. However, superstructures and properties of preassembled nanomaterials are somewhat compromised under complicated physiological conditions. Given the advantages of the dynamic nature and adaptive behavior of self-assembly systems, we propose an "in vivo self-assembly" strategy for in situ construction of nanomaterials in living objects. For the proof-of-concept study of in vivo self-assembly, we developed a bispyrene (BP) molecule as a multifunctional building block. BP molecules show nonfluorescence in the monomeric state. Quantum-chemical calculations indicate that BP forms twisted intramolecular charge transfer states, which are separated into two orthogonal units, preventing the fluorescence emission. Interestingly, the typical excimeric emission of BP is observed with the formation of J-type aggregates, as confirmed by single-crystal X-ray diffraction. Packing of the BP molecules generates parallel pyrene units that interact with adjacent ones in a slipped face-to-face fashion through intermolecular π-π interactions. BP and/or its amphiphilic derivatives are capable of self-aggregating into nanoparticles (NPs) in aqueous solution because of the hydrophobic and π-π interactions of BP. Upon specific biological stimuli, BP NPs can be transformed into variable self-assembled superstructures. Importantly, the self-assembled BP NPs exhibit turn-on fluorescence signals that can be used to monitor the self-assembly/disassembly process in vitro and in vivo. On the basis of the photophysical properties of BP and its aggregates, we synthesized a series of designed BP derivatives as building blocks for in situ construction of functional nanomaterials for bioimaging and/or therapeutics. We observed several new biomedical effects, e.g., (i) the assembly/aggregation-induced retention (AIR) effect, which shows improved accumulation and retention of bioactive nanomaterials in the regions of interests; (ii) the transformation-induced surface adhesion (TISA) effect, which means the BP NPs transform into nanofibers (NFs) on cell surfaces upon binding with specific receptors, which leads to less uptake of BP NPs by cells via traditional endocytosis pathway; and (iii) transformation of the BP NPs into NFs in the tumor microenvironment, showing high accumulation and long-term retention, revealing the transformation-enhanced accumulation and retention (TEAR) effect. In this Account, we summarize the fluorescence property and emission mechanism of BP building blocks upon aggregation in the biological environment. Moreover, BP-derived compounds used for in vivo self-assembly and transformation are introduced involving modulation strategies. Subsequently, unexpected biomedical effects and applications for theranostics of BP based nanomaterials are discussed. We finally conclude with an outlook toward future developments of BP-based self-assembled nanomaterials.

Guest-mediated chirality transfer in the host–guest complexes of an atropisomeric perylene bisimide cyclophane host

Chirality transfer upon preferential binding of homochiral guests to one stereoisomer of a conformationally equilibrated atropisomeric cyclophane is reported.

Light-Responsive Shape: From Micrometer-Long Nanocylinders to Compact Particles in Electrostatic Self-Assembly

A light-triggered shape change of supramolecular nanostructures is achieved through electrostatically self-assembly of linear polyelectrolytes and oppositely charged dyes in aqueous solution: Upon UV-irradiation, 1-µm-long, flexible cylinders with a cross-section of 10 nm convert into ellipsoids of 400 nm × 40 nm. The nano-object shape is encoded in the molecular dye structure.

H-Aggregated π-Systems Based on Disulfide-Linked Dimers of Dipyrrolyldiketone Boron Complexes

Dipyrrolyldiketone boron complexes linked by a disulfide bond were synthesized, forming H-aggregated dimers assisted by intramolecular π-π and hydrogen-bonding interactions. The conformations of the dimers, with small C-S-S-C dihedral angles, were examined by UV-vis absorption and ¹H NMR spectra as well as single-crystal X-ray analysis and theoretical studies.

Aliphatic-Alcohol-Induced Opaque-to-Transparent Transformation and Application of Solubility Theory in a Bis-Dipeptide-Based Supramolecular Gel

A bis-dipeptide supramolecular gelator (DMPV) is prepared, based on l-valine moieties having a pyridinyl group and a long fatty diamine. It is found that the gelator can immobilize organic/water binary mixed solvents, and gel-to-gel transitions with unprecedented opaque-to-transparent transformations are observed upon using aliphatic alcohols such as methanol, ethanol, 1-propyl alcohol, and isopropanol as the organic components. Morphological investigations indicate that a reassembly process occurs, and microstructure evolutions from agglomerates to nanofibers are observed. Opaque and transparent assemblies can interconvert, and respond and restore under mechanical force and pH stimuli. Moreover, Hansen and Flory-Huggins parameters are used to investigate the effect of the solvent on the gelation performance of DMPV. This may facilitate the structure and solvent optimizations and aid the development of advanced gel systems.

Click chemistry-assisted, bis-cholesteryl-appended, isosorbide-based, dual-responsive organogelators and their self-assemblies

A new series of symmetric, bis-cholesteryl-appended, isosorbide derivatives (BCIE, BCIC2 and BCIC4) were designed as gelators to respond to changes in their environment and were synthesized successfully. Among these derivatives, BCIE can gel a wide variety of organic solvents (23 solvents), suggesting that BCIE acts as a more versatile gelator than BCIC2 and BCIC4. The CGC of the gels varies from 1.53 mM in 1-hexanol to 23 mM in pyridine. The results of the gelation ability in different solvents revealed that changing the linking group (ester/carbamate) attached to the cholesteryl units can produce a dramatic change in the gelation behavior of the compounds. The morphology of the as-formed organogels can be regulated by changing the types of organic solvents. The results from electron microscopy studies revealed that the gelator molecule self-assembled into different aggregates, from wrinkled fibers to dense fibers, with the change of solvents. The gels of BCIE in 1-hexanol and 1-octanol exhibited strong CD (circular dichroism) signals, indicating that the gelation induced supramolecular chirality in these gel systems. Secondary forces of van der Waals and π-π stacking (from both 1,2,3-triazole and aromatic units) played important roles in the aggregation of compounds in the solvents according to FTIR and variable temperature (1)H-NMR analysis, and a mechanism for the gel formation was proposed. The gel-to-sol phase transition can be triggered by the addition of trifluoroacetic acid (TFA), and the gel state was obtained slowly (after 1 day) when neutralizing with triethyl amine (TEA), which indicated that the sol ⇄ gel phase transitions are tunable by pH, which is further supported by (1)H-NMR and SEM analysis. In addition, the gel stability of BCIE was investigated using Cu(2+), Cd(2+), Ag(2+), Fe(3+), Hg(2+), Mg(2+), Pd(2+), Al(3+) and Zn(2+), and the results showed that the gel-to-sol phase transition process could be selectively controlled by interaction with Pd(2+) and Zn(2+) because complexation with 1,2,3-triazoles destroyed the interactions between the triazoles, collapsing the gel, which was further evidenced by (1)H-NMR and SEM analysis. However, the gel stability of BCIE was enhanced by the addition of Pd(2+) and Zn(2+) in the presence of pyridine, whereas the gel collapsed in other solvents, which may be due to the chelating effect of the pyridine moiety. Another interesting feature of this gel is that when using the gelator as a stabilizer, stable water in oil (W/O) gel-emulsions were created, in which styrene can be used as the continuous phase and water as the dispersed phase with the stabilizer in the continuous phase of only 2% (w/v). Gel-emulsions were observed with any ratio of water to styrene.

Photo-Induced Assembly of Nanostructures Triggered by Short-Lived Proton Transfers in the Excited-State

Light stimulation was used to trigger the assembly of nanostructures by directly powering changes at the supramolecular level without incurring net chemical changes at the molecular level. Polyethylene imine, a polybase, was mixed in aqueous solution with sodium 1-naphthol-4-sulfonate, an aromatic alcohol, which, in the electronic excited-state, undergoes a short-lived increase in acidity. Excited-state proton transfers between these components were induced by photoexcitation, which led to the formation of hydrogen bonds in the ground-state. Ionic forces, π-π stacking, and hydrophobic effect provided further stabilization. The photoinduced formation of nanosized aggregates was detected by dynamic light scattering and atomic force microscopy. Absorption and emission spectroscopy were used to rule out photochemical reactions and elucidate the supramolecular arrangement.

Structure-property relationships of symmetrical and asymmetrical azobenzene derivatives as gelators and their self-assemblies

Two different series of symmetrical and asymmetrical azobenzenes containing terminal cholesteryl/adamantyl derivatives (SAC/SAA and AAC) with varying spacer lengths (alkyl chains) have been developed. The gelation and aggregation of these derivatives were studied relative to structural motifs, spacer lengths, solvent affinity, temperatures and light conditions. Among these derivatives, the cholesteryl derivatives that have short alkyl chains (<3) act as efficient gelators in a variety of solvents. However, the cholesteryl derivatives with longer alkyl chains (11 spacer) and adamantyl derivatives did not possess this ability. Self-assembled fibrous structures were constructed by gelators with short alkyl chains (<3), while flower-like structures were constructed by gelators with moderately longer alkyl chains (3-6) at their respective critical gelation concentrations (CGCs) according to SEM (Scanning Electron Microscopy) and TEM (Transmission Electron Microscopy) analyses. In some cases, a partial/weak gel was observed in different solvents, which exhibited uniform spherical nanoparticles at CGCs. These nanoparticles were further entangled to form interconnected fibrous structures when the concentration was increased above the CGC (according to the SEM and TEM analyses). Secondary forces (van der Waals/H-bonding) and π-π stacking played important roles in the aggregation of both series in the solvents according to variable temperature (1)H-NMR analysis. The reversibility of sol-gel transitions by light was studied with respect to solvent affinity. This study revealed that reversible transitions were only observed in the non-polar solvents, as supported by the FTIR analysis of the gelators in the various solvents. The thermal and mesomorphic behaviors of the gelators by DSC (Differential Scanning Calorimetry) and POM (Polarized Optical Microscopy) analyses revealed that the chiral nematic (N*) and cholesteric mesophase (Ch*) were exhibited by only the short and longer alkyl chain cholesteryl derivatives, respectively. However, the cholesteryl derivative without a spacer (AAC0) did not exhibit any liquid crystalline phase but acted as an efficient gelator relative to the other gelators in this study.

Solvent induced helical aggregation in the self-assembly of cholesterol tailed platinum complexes

Three alkynylplatinum(ii) bipyridyl complexes in which two cholesterol groups are combined with a bipyridyl group via alkyl chains and amido bonds were designed and synthesized. The complexes have different lengths of ethylene glycol chains at the para-position of 1-phenylethyne. All three complexes can self-assemble to gel networks in DMSO, while only the morphology of 1a without an ether chain shows a well-defined right-handed helical structure in layer packing mode. However, 1c with long ethylene glycol chains forms perfect regular left-handed helical structures in aqueous ethanol solution while the volume percentage of water is less than 5% (v/v). As the ratio of water increases, the chirality changes from a left-handed helix to a right-handed helix and the packing mode alters from a monolayer structure to a hexagonal structure. As the ratio of water further increases to greater than 50% (v/v), the structure of the assembly finally transforms into bilayer vesicles. The process of the morphology transition is traced by circular dichroism spectra, powder X-ray diffraction, SEM and TEM images. The result indicates that a polar solvent (water) acts as a trigger to change the self-assembly of the chiral structures of the complex due to the strong hydrophobic interaction between cholesterol groups and the balance of the hydrophobicity and hydrophilicity of the solvent environment.

Control of molecular gelation by chemical stimuli

Molecular gels are formed by the self-assembly of low-molecular weight compounds by weak non-covalent interactions and thus, they may be easily disassembled in response to external stimuli. Chemically sensitive gels can be prepared by introducing in the molecular design functional groups that may interact either by covalent or non-covalent forces with other molecules present in the medium. Functional molecular gels have been reported that are sensitive to acids, bases, ions, redox-active compounds, neutral species, reactive compounds and enzymes. Here we present a broad revision of the different chemical inputs that can be used to tune gel properties through some appealing application-based selected examples.

Determinants of cyanuric acid and melamine assembly in water

While the recognition of cyanuric acid (CA) by melamine (M) and their derivatives has been known to occur in both water and organic solvents for some time, analysis of CA/M assembly in water has not been reported (Ranganathan, A.; Pedireddi, V. R.; Rao, C. N. R. J. Am. Chem. Soc.1999, 121, 1752-1753; Mathias, J. P.; Simanek, E. E.; Seto, C. T.; Whitesides, G. M. Macromol. Symp.1994, 77, 157-166; Zerkowski, J. A.; MacDonald, J. C.; Seto, C. T.; Wierda, D. A.; Whitesides, G. M. J. Am. Chem. Soc.1994, 116, 2382-2391; Mathias, J. P.; Seto, C. T.; Whitesides, G. M. Polym. Prepr.1993, 34, 92-93; Seto, C. T.; Whitesides, G. M. J. Am. Chem. Soc.1993, 115, 905-916; Zerkowski, J. A.; Seto, C. T.; Whitesides, G. M. J. Am. Chem. Soc.1992, 114, 5473-5475; Seto, C. T.; Whitesides, G. M. J. Am. Chem. Soc.1990, 112, 6409-6411; Wang, Y.; Wei, B.; Wang, Q. J. Chem. Cryst.1990, 20, 79-84; ten Cate, M. G. J.; Huskens, J.; Crego-Calama, M.; Reinhoudt, D. N. Chem.-Eur. J.2004, 10, 3632-3639). We have examined assembly of CA/M, as well as assembly of soluble trivalent CA and M derivatives (TCA/TM), in aqueous solvent, using a combination of solution phase NMR, isothermal titration and differential scanning calorimetry (ITC/DSC), cryo-transmission electron microscopy (cryo-TEM), and synthetic chemistry. While the parent heterocycles coprecipitate in water, the trivalent system displays more controlled and cooperative assembly that occurs at lower concentrations than the parent and yields a stable nanoparticle suspension. The assembly of both parent and trivalent systems is rigorously 1:1 and proceeds as an exothermic, proton-transfer coupled process in neutral pH water. Though CA and M are considered canonical hydrogen-bonding motifs in organic solvents, we find that their assembly in water is driven in large part by enthalpically favorable surface-area burial, similar to what is observed with nucleic acid recognition. There are currently few synthetic systems capable of robust molecular recognition in water that do not rely on native recognition motifs, possibly due to an incomplete understanding of recognition processes in water. This study establishes a detailed conceptual framework for considering CA/M heterocycle recognition in water which enables the future design of molecular recognition systems that function in water.

Rational construction of perylene bisimide columnar superstructures with a biased helical sense

Discotic supramolecular complexes bearing six perylene bisimide (PBI) chromophores were prepared by mixing monotopically triple-hydrogen-bonding melamines equipped with two PBI chromophores and two 3,7-dimethyloctyl chiral handles with tritopically triple-hydrogen-bonding cyanuric acid (CA). UV/Vis and fluorescence titration experiments demonstrated that the discotic complexes were formed in methylcyclohexane by the 3:1 complexation between the melamines and CA. TEM and AFM studies revealed that the complexes hierarchically organize into fibrous columnar assemblies, which eventually results in the formation of organogels. Circular dichroism (CD) and flash-photolysis time resolved microwave conductivity measurements revealed the presence of extended chiral stacks of PBI chromophores within the columns. The anisotropy factors of the columnar assemblies are remarkably high (g=1.5×10(-3)) when considering the presence of only one 3,7-dimethyloctyl chiral handle per perylene chromophore, suggesting that the columnar structures have a biased helical sense. The fact that the chiral centers are located inside the discotic complexes rather than at their peripheries might be unique structural property responsible for the rather strong optical activities for the assemblies of this chromophore. The effective transcription of the molecular chirality to the extended columnar assemblies through the formation of unique discotic complexes enables the expression of "majority-rules" chiral amplification effect, which is unprecedented for the supramolecular assemblies of PBIs.

Mechanical tuning of molecular recognition to discriminate the single-methyl-group difference between thymine and uracil

Construction of enzyme-like artificial cavities is a complex and challenging subject. Rather than synthesizing complicated host molecules, we have proposed mechanical adaptation of relatively simple hosts within dynamic media to determine the optimum conformation for molecular recognition. Here we have applied this concept to one of the most challenging biomolecular recognition problems, i.e., that of discriminating thymine from uracil. We synthesized the novel cholesterol-armed triazacyclononane as a host molecule and subjected it to structural tuning by compression of its Langmuir monolayers in the absence and in the presence of Li(+) cations in the subphase. Experimental results confirm that the monolayer of triazacyclononane host selectively recognizes uracil over adenine (ca. 7 times based on the binding constant) and thymine (ca. 64 times) under optimized conditions ([LiCl] = 10 mM at surface pressure of 35 mN m(-1)). The concept of mechanical tuning of a host structure for optimization of molecular recognition offers a novel methodology in host-guest chemistry as an alternative to the more traditional molecular design strategies.

Structural and electronic properties of extremely long perylene bisimide nanofibers formed through a stoichiometrically mismatched, hydrogen-bonded complexation

Extremely long nanofibers, whose lengths reach the millimeter regime, are generated via co-aggregation of a melamine-appended perylene bisimide semiconductor and a substituted cyanurate, both of which are ditopic triple-hydrogen-bonding building blocks; they co-aggregate in an unexpected stoichiometrically mismatched 1:2 ratio. Various microscopic and X-ray diffraction studies suggest that hydrogen-bonded polymeric chains are formed along the long axis of the nanofibers by the 1:2 complexation of the two components, which further stack along the short axis of the nanofibers. The photocarrier generation mechanism in the nanofibers is investigated by time-of-flight (TOF) experiments under electric and magnetic fields, revealing the birth and efficient recombination of singlet geminate electron-hole pairs. Flash-photolysis time-resolved microwave conductivity (FP-TRMC) measurements revealed intrinsic 1D electron mobilities up to 0.6 cm(2) V(-1) s(-1) within nanofibers.