Silica@poly(chitosan-N-isopropylacrylamide-methacrylic acid) microgels: Extraction of palladium (II) ions and in situ formation of palladium nanoparticles for pollutant reduction

Most of the transition metal ions and organic dyes are toxic in nature. Therefore, their removal from water is imperative for human health. For this purpose, various types of systems have been developed to tackle either transition metal ions or organic dyes individually. A core-shell microgel system is introduced which is capable of effectively removing both types (toxic organic dyes and transition metal ions) of pollutants. A long-rod-shaped silica@poly(chitosan-N-isopropylacrylamide-methacrylic acid) S@P(CS-NIPAM-MAA) S@P(CNM) core-shell microgel system was developed by free radical precipitation polymerization method (FRPPM). S@P(CNM) was utilized as an adsorbent for extracting palladium (II) (Pd (II)) ions from water under different concentrations of S@P(CNM), several agitation times, palladium (II) ion content, and pH levels. The adsorption data of Pd (II) ions on S@P(CNM) was evaluated by various adsorption isotherms. The kinetic study was investigated by employing pseudo-2nd order (Ps2O), Elovich model (ElM), intra-particle diffusion (IPDM), and pseudo-1st order (Ps1O). Additionally, palladium nanoparticles (Pd NPs) were generated via in-situ reduction of adsorbed Pd (II) ions within the P(CNM) shell region of S@P(CNM). The resulting Pd NPs loaded S@P(CNM) exhibited the capability to reduce organic pollutants like methyl orange (MeO), 4-nitrophenol (4NiP), methylene blue (MeB), and Rhodamine B (RhB) from aqueous medium. 0.766 min-1, 0.433 min-1, 0.682 min-1, and 1.140 min-1 were the values of pseudo 1st order rate constant (kobs) for catalytic reduction of MeB, 4NiP, MeO, and RhB respectively. The S@Pd-P(CNM) system exhibits significant catalytic potential for various organic transformations.

Porphyrin-Based Hybrid Nanohelices: Cooperative Effect between Molecular and Supramolecular Chirality on Amplified Optical Activity

The development of chiral receptors for discriminating the configuration of the analyte of interest is increasingly urgent in view of monitoring pollution in water and waste liquids. Here, we investigate an easy protocol to immobilize the desired non-water-soluble receptors inside a water-dispersible chiral nanoplatform made of silica. This approach induces chirality in the receptors and Here, we investigate an easy protocol to immobilize the desired non-water-soluble receptors inside a water-dispersible chiral nanoplatform made of silica. This approach induces chirality in the receptors and makes the dye@nanohelix system disperse in a suspension of water without aggregation. We noted strong induction and amplification of chiroptical activity in both achiral and chiral (proline-based or hemicucurbituril-based) porphyrin derivatives with and without zinc ions once confined and organized in nanometer silica helices. The results clearly demonstrated that the organization-induced chirality amplification of porphyrins dominates the molecular chirality, and the amplification is more efficient for more flexible porphyrins (especially free-base and achiral).

Eco-friendly and cost-effective adsorbent derived from blast furnace slag with black liquor waste for hazardous remediation

The current investigation concerns with preparation eco-friendly and cost-effective adsorbent (mesoporous silica nanoparticles (SBL)) based on black liquor (BL) containing lignin derived from sugarcane bagasse and combining it with sodium silicate derived from blast furnace slag (BFS) for thorium adsorption. Thorium ions were adsorbed from an aqueous solution using the synthesized bio-sorbent (SBL), which was then assessed by X-ray diffraction, BET surface area analysis, scanning electron microscopy with energy dispersive X-ray spectroscopy (EDX), and Fourier transforms infrared spectroscopy (FTIR). Th(IV) sorption properties, including the pH effect, uptake rate, and sorption isotherms across various temperatures were investigated. The maximum sorption capacity of Th(IV) on SBL is 158.88 mg/L at pH value of 4328 K, and 60 min contact time. We demonstrated that the adsorption processes comport well with pseudo-second-order and Langmuir adsorption models considering the kinetics and equilibrium data. According to thermodynamic inspections results, the Th(IV) adsorption process exhibited endothermic and random behavior suggested by positive ΔH° and ΔS° values, while the negative ΔG° values indicated a spontaneous sorption process. The maximum Th(IV) desorption from the loaded SBL (Th/SBL) was carried out at 0.25 M of NaHCO3 and 60 min of contact. Sorption/desorption processes have five successive cycles. Finally, this study suggests that the recycling of BFS and BL can be exploited for the procurement of a promising Th(IV) adsorbents.

Green wastewater treatment of repurposed COVID-19 therapy (levofloxacin) using synthesized magnetite pectin nanoparticles, comparison with mesoporous silica nanoparticles

RATIONALE

Antibiotics have been detected worldwide in the aquatic environment. Moreover, certain classes of antibiotics have been repurposed for the management of COVID-19, which increased their use and presence in wastewater. Their occurrence even in low concentrations leads to the development of antibiotic resistance.

METHODOLOGY

Magnetite pectin nanoparticles (MPNP) were fabricated and compared to an established model of mesoporous silica nanoparticles (MSNP). Our studied adsorbate is levofloxacin, a fluoroquinolone antibiotic, commonly used in managing COVID-19 cases.

RESULTS

The influence of various factors affecting the adsorption process was studied, such as pH, the type and concentration of the adsorbent, contact time, and drug concentration. The results illustrated that the optimum adsorption capacity for antibiotic clearance from wastewater using MPNP was at pH 4 with a contact time of 4 h; while using MSNP, it was found to be optimum at pH 7 with a contact time of 12 h at concentrations of 10 µg/mL and 16 g/L of the drug and nanoparticles, respectively, showing adsorption percentages of 96.55% and 98.89%. Drug adsorption equilibrium data obeyed the Sips isotherm model.

DISCUSSION AND CONCLUSION

HPLC assay method was developed and validated. The experimental results revealed that the MPNP was as efficient as MSNP for removing the antibacterial agent. Moreover, MPNP is eco-friendly (a natural by-product of citrus fruit) and more economic as it could be recovered and reused. The procedure was evaluated according to the greenness assessment tools: AGREE calculator and Hexagon-CALIFICAMET, showing good green scores, ensuring the process's eco-friendliness.

Tailoring of Mesoporous Silica-Based Materials for Enhanced Water Pollutants Removal

The adsorptive performance of mesoporous silica-based materials towards inorganic (metal ions) and organic (dyes) water pollutants was investigated. Mesoporous silica materials with different particle size, surface area and pore volume were prepared and tailored with different functional groups. These materials were then characterised by solid-state techniques, namely vibrational spectroscopy, elemental analysis, scanning electron microscopy and nitrogen adsorption-desorption isotherms, allowing the successful preparation and structural modifications of the materials to be confirmed. The influence of the physicochemical properties of the adsorbents towards the removal of metal ions (Ni²⁺, Cu²⁺ and Fe³⁺) and organic dyes (methylene blue and methyl green) from aqueous solutions was also investigated. The results reveal that the exceptionally high surface area and suitable ζ-potential of the nanosized mesoporous silica nanoparticles (MSNPs) seem to favour the adsorptive capacity of the material for both types of water pollutants. Kinetic studies were performed for the adsorption of organic dyes by MSNPs and large-pore mesoporous silica (LPMS), suggesting that the process follows a pseudo-second-order model. The recyclability along consecutive adsorption cycles and the stability of the adsorbents after use were also investigated, showing that the material can be reused. Current results show the potentialities of novel silica-based material as a suitable adsorbent to remove pollutants from aquatic matrices with an applicability to reduce water pollution.

Extraction of silica from fly-ash and fabrication of silica-clay composite for dye removal and kinetic studies

A facile and green approach to extract silica from the coal fly-ash waste is extremely critical for environmental sustainability and economically suitable. In this study, we have used acid-alkali coupled approach to improvised the proficiency of the extraction process. The sodium hydroxide (NaOH) soaking results the formation of the sodium silicate (Na2SiO3) solution then pure silica was obtained by heating at high temperature; this coupled route-way results better yield of silica (SiO2) which is ∼ 40 g. The efficiency of pure silica is not enough to remove toxic effluents from the aqueous media. A highly versatile approach of composite formation was adopted to fabricate silica-clay composite using kaolinite-clay and extracted silica. Both materials, extracted silica and its silica-clay composite were analyzed using scanning electron microscopy (SEM), energy dispersive X-ray (EDX) method, X-ray diffraction technique (XRD) and Fourier transform infra-red spectroscopy (FTIR). The silica-clay composite showed plate-tubular like morphology with enormous binding sites available for the sorption pollutants like organic dyes. It has shown excellent sorption of methylene blue (MB) efficiency of 131.5 mg/g, while silica furnished the sorption of 70.5 mg/g. Results revealed that the synthesized material could probably have better potential for dye removal from industrial effluents.

Screening of new adsorbents to remove algal organic matter from aqueous solutions: kinetic analyses and reduction of disinfection by-products formation

The algal organic matter (AOM) is a problem in water treatment. Although the adsorption process is extensively applied to drinking water treatment, little information is known about the potential of new adsorbents to remove AOM. Herein, this work evaluated the removal of AOM and its main compounds (dissolved organic carbon (DOC), carbohydrate, and protein) by new adsorbents-mesoporous silica (SBA-16), graphene oxide material from citric acid (CA), and sugar (SU), and a composite of CA immobilized on sand (GSC). In general, the removal efficiencies followed the order of SBA-16 > CA > SU or GSC for DOC, carbohydrate, and protein. At environmental condition (5 mg DOC·L^-1 and pH 8), high removals were reported for SBA-16 (88.8% DOC, 80.0% carbohydrate, and 99.6% protein) and CA (70.0% DOC, 66.7% carbohydrate, and 89.7% protein), while moderate removals were found for SU (60.5% DOC, 47.9% carbohydrate, and 66.5% protein) and GSC (67.4% DOC, 60.8% carbohydrate, and 57.4% protein). Based on these results, further analyses were done with SBA-16 and CA. Both adsorbents' efficiencies decayed with the pH increment of the test water. Disinfection by-products reductions found using SBA-16 - trihalomethanes (58.2 to 94.7%) and chloral hydrate (48.7 to 78.8%) - were higher than the ones using CA-trihalomethanes (45.2 to 82.4%) and chloral hydrate (40.1 to 70.8%). This study showed the potential of applying these adsorbents for AOM removal, and further investigations are suggested to increase the adsorption capacity of these adsorbents.

Removal of Zn2+ from Aqueous Solution Using Biomass Ash and Its Modified Product as Biosorbent

To study the removal effect of bottom ash of biomass power plants and its modified products on zinc (Zn²⁺) in aqueous solution, a series of indoor experiments is carried out. The aim of this work is to explore a method to improve the ability of biomass ash to remove Zn²⁺ from aqueous solution and obtain its adsorption characteristics of Zn²⁺ in aqueous solution; on this basis, the feasibility of its application in the treatment of Zn²⁺-contaminated wastewater is analyzed. The mesoporous siliceous material is used to modify the biomass, and the modified material is functionalized with 3-aminopropyltriethoxysilane. The results show that the specific surface area of modified biomass ash is nine times that of the material before modification. The adsorption capacity of Zn²⁺ on the material increases with the increase of pH, and pH 6 is the optimum pH to remove Zn²⁺ from the aqueous solution. The Langmuir model and Freundlich model can show better fits for biomass ash and the modified material, respectively. Thermodynamic analysis results show that the adsorption of Zn²⁺ is spontaneous and endothermic in nature. The adsorption of Zn²⁺ onto biomass and modified biomass ash follow pseudo-first-order and pseudo-second-order kinetics, respectively.

Nanostructured Materials for Water Purification: Adsorption of Heavy Metal Ions and Organic Dyes

Chemical water pollution poses a threat to human beings and ecological systems. The purification of water to remove toxic organic and inorganic pollutants is essential for a safe society and a clean environment. Adsorption-based water treatment is considered one of the most effective and economic technologies designed to remove toxic substances. In this article, we review the recent progress in the field of nanostructured materials used for water purification, particularly those used for the adsorption of heavy metal ions and organic dyes. This review includes a range of nanostructured materials such as metal-based nanoparticles, polymer-based nanomaterials, carbon nanomaterials, bio-mass materials, and other types of nanostructured materials. Finally, the current challenges in the fields of adsorption of toxic materials using nanostructured materials are briefly discussed.

Synthesis and Characterization of Mesoporous Aluminum Silicate and Its Adsorption for Pb (II) Ions and Methylene Blue in Aqueous Solution

Aluminum silicate powder was prepared using two different syntheses: (1) co-precipitation and (2) two-step sol-gel method. All synthesized powders were characterized by various techniques including XRD, FE-SEM, FT-IR, BET, porosimeter, and zetasizer. The particle morphology of the synthesized aluminum silicate powder was greatly different depending on the synthesis. The synthesized aluminum silicate powder by co-precipitation had a low specific surface area (158 m²/g) and the particle appeared to have a sharp edge, as though in a glassy state. On the other hand, synthesized aluminum silicate powder by the two-step sol-gel method had a mesoporous structure and a large specific surface area (430 m²/g). The aluminum silicate powders as adsorbents were characterized for their adsorption behavior towards Pb (II) ions and methylene blue in an aqueous solution performed in a batch adsorption experiment. The maximum adsorption capacities of Pb (II) ions and methylene blue onto the two-step sol-gel method powder were over four-times and seven-times higher than that of the co-precipitation powder, respectively. These results show that the aluminum silicate powder synthesized with a two-step sol-gel method using ammonia can be a potential adsorbent for removing heavy metal ions and organic dyes from an aqueous solution.

A review on the adsorption mechanism of different organic contaminants by covalent organic framework (COF) from the aquatic environment

Recently, covalent organic frameworks (COFs) have gained significant attention as a promising material for the elimination of various organic pollutants due to their distinctive characteristics such as high surface area, adjustable porosity, high removal efficiency, and recyclability. The efficiency and selectivity of COFs depend on the decorated functional group and the pore size of the chemical structure. Hence, this review highlights the adsorption removal mechanism of different organic contaminants such as (pharmaceutical and personal care products, pesticides, dyes, and industrial by-products) by COFs from an aqueous solution. Spectroscopic techniques and theoretical calculation methods are introduced to understand the mechanism of the adsorption process. Also, a comparison between the performance of COFs and other adsorbents was discussed. Furthermore, future research directions and challenges encountered in the removal of organic contaminants by COFs are discussed.

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

A Novel In Situ Method for Simultaneously and Selectively Measuring AsIII, SbIII, and SeIV in Freshwater and Soils

Anthropogenic and climatic perturbations redistribute arsenic (As), antimony (Sb), and selenium (Se) within the environment. The speciation characteristics of these elements determine their behavior and biogeochemical cycling, but these redox-sensitive species are challenging to capture, with few methods able to harmonize measurements across the whole plant-soil-ecosystem continuum. In this study, we developed a novel diffusive gradient in thin films (DGT) method based on aminopropyl and mercaptopropyl bi-functionalized mesoporous silica spheres (AMBS) to achieve in-situ, simultaneous, and selective quantification of As^III, Sb^III, and Se^IV, three typical/toxic but difficult to measure inorganic species. When used for environmental monitoring within a river catchment, AMBS-DGT exhibited stable/accurate predictions of these species despite varying water chemistries (ionic strength 0.01-200 mmol L^-1 NO₃^-, pH 5-9 for As^III and Sb^III, and pH 5-7.5 for Se^IV). Furthermore, river deployments also showed that time-averaged species concentrations by AMBS-DGT were reproducible compared with high-frequency sampling and measurement by high performance liquid chromatography coupled with inductively coupled plasma mass spectroscopy. When AMBS-DGT was used for sub-mm scale chemical imaging of soil solute fluxes, the method resolved concomitant redox-constrained spatial patterns of As^III, Sb^III, and Se^IV associated with root O₂ penetration within anaerobic soil. Improved capabilities for measurement of compartment interfaces and microniche features are critical alongside the measurement of larger-scale hydrological processes that dictate the fine-scale effects, with the AMBS-DGT achieving this for As^III, Sb^III, and Se^IV.

Yolk-shell smart Pickering nanoreactors for base-free one-pot cascade Knoevenagel-Hydrogenation with high catalytic efficiency in water

In present work, Au@Pd nanoparticles, catalytic active centers, were first implanted in amphiphilic hollow vinyl-pyridyl groups-doped periodic mesoporous organosilica (PMO) shells, and we got yolk–shell smart Pickering Au@Pd@Py-PMO nanoreactors. Two...

Preparation of novel porous Al2O3-SiO2nanocomposites via solution-freeze-drying-calcination method for the efficient removal of uranium in solution

In this work, the efficient extraction of uranium in solution using Al₂O₃-SiO₂-T was reported. Kinetics and isotherm models indicated that the removal process of uranium on Al₂O₃-SiO₂-T accorded with pseudo-second-order kinetic model and Langmuir isotherm model, which showed that the adsorption process was a uniform mono-layer chemical behavior. The maximum adsorption capacity of Al₂O₃-SiO₂-T reached 738.7 mg g^-1, which was higher than AlNaO₆Si₂(349.8 mg g^-1) and Al₂O₃-SiO₂-NT (453.1 mg g^-1), indicating that the addition of template could effectively improve the adsorption performance of Al₂O₃-SiO₂to uranium. Even after five cycles of adsorption-desorption, the removal percentage of uranium on Al₂O₃-SiO₂-T remained 96%. Besides, the extraction efficiency of uranium on Al₂O₃-SiO₂-T was 72.5% in simulated seawater, which suggested that the Al₂O₃-SiO₂-T was expected to be used for uranium extraction from seawater. Further, the interaction mechanism between Al₂O₃-SiO₂-T and uranium species was studied. The results showed that the electrostatic interaction and complexation played key roles in the adsorption process of Al₂O₃-SiO₂-T to uranium.

Cubically cage-shaped mesoporous ordered silica for simultaneous visual detection and removal of uranium ions from contaminated seawater

A dual-function organic-inorganic mesoporous structure is reported for naked-eye detection and removal of uranyl ions from an aqueous environment. The mesoporous sensor/adsorbent is fabricated via direct template synthesis of highly ordered silica monolith (HOM) starting from a quaternary microemulsion liquid crystalline phase. The produced HOM is subjected to further modifications through growing an organic probe, omega chrome black blue G (OCBBG), in the cavities and on the outer surface of the silica structure. The spectral response for [HOM-OCBBG → U(VI)] complex shows a maximum reflectance at λ_max = 548 nm within 1 min response time (t_R); the LOD is close to 9.1 μg/L while the LOQ approaches 30.4 μg/L, and this corresponds to the range of concentration where the signal is linear against U(VI) concentration (i.e., 5-1000 μg/L) at pH 3.4 with standard deviation (SD) of 0.079 (RSD% = 11.7 at n = 10). Experiments and DFT calculations indicate the existence of strong binding energy between the organic probe and uranyl ions forming a complex with blue color that can be detected by naked eyes even at low uranium concentrations. With regard to the radioactive remediation, the new mesoporous sensor/captor is able to reach a maximum capacity of 95 mg/g within a few minutes of the sorption process. The synthesized material can be regenerated using simple leaching and re-used several times without a significant decrease in capacity.

Synthesis, Characterization, and Application of Co-Al-Zn Layered Double Hydroxide/Hydrochar Composite for Simultaneous Removal of Cationic and Anionic Dyes

Decontamination of organic dyes from wastewater requires efficient and compatible materials that must be able to remove dyes with different charges at the same time. In this study, composites of layered double hydroxide (LDH) and hydrochar (HC) were prepared and tested for use as general-purpose sorbents for the simultaneous removal of cationic and anionic dyes (i.e., methylene blue (MB), methyl orange (MO), and reactive yellow (RY)). Characterization studies reveal that the surface functional groups on composites are –OH, NO3, M–O bonds. It was observed that crystallinity of LDH decreased with an increasing amount of HC. Preliminary experiments showed that the dyes (i.e., MB, MO, and RY) were well removed simultaneously onto the composite with HC (2.0 g HC/prepared composite). This composite was selected for more experiments, and the adsorption efficiency was optimized by the multivariate technique using the response surface methodology (RSM). Removal efficiency of 100% was obtained for all three dyes with an adsorption capacity of 243, 5.3, and 16.3 µmol g−1 for MB, MO, and RY, respectively. Elovich’s initial intake rates (α) were 4,272, 441, and 99.5 mg g−1 min−1 for RY, MB, and MO, respectively. Data fitted in various models suggested second-order multiplex kinetics, where the surface heterogeneity response was sorbate dependent.

Carrageenan-based nano-hybrid materials for the mitigation of hazardous environmental pollutants

Fast industrialization and population growth are associated with the increased release of hazardous contaminants in the environment. These hazardous substances, including pharmaceutical, biomedical, personal-care products, heavy metals, endocrine-disrupters, and colorants, pollute the ecosystem by disturbing nature's balance. Nanotechnology has paved new horizons in biochemical engineering by designing novel approaches of integrating nanoscale science with biotechnology to construct improved quality materials for target uptake of pollutants. Recently, nanostructured materials have emerged as research and development frontiers owing to their excellent properties. The tailored designing of nanohybrids constructs with physicochemical alteration enables the nano-bioadsorbent with high target specificity and efficiency. The development of eco-friendly, biodegradable, cost-efficient, and biopolymer-based nanohybrid constructs is gaining attention to remove hazardous environmental pollutants. κ-carrageenan biopolymer is frequently used with different nanomaterials to design nanohybrid bio-adsorbents to remove various contaminants. Herein, the potentialities of carrageenan-based nanohybrid constructs in environmental remediation have been summarized. Different nanostructures, e.g., silica, non-magnetic/magnetic, carbon nanotubes/nanorods, nanoclay/nanomembrane, metal organic frameworks, graphene oxide, and other nanomaterials have been described in combination with carrageenan biopolymers focusing on environmental remediation.

SBA-15 with Crystalline Walls Produced via Thermal Treatment with the Alkali and Alkali Earth Metal Ions

Crystalline walled SBA-15 with large pore size were prepared using alkali and alkali earth metal ions (Na⁺, Li⁺, K⁺ and Ca²⁺). For this work, the ratios of alkali metal ions (Si/metal ion) ranged from 2.1 to 80, while the temperatures tested ranged from 500 to 700 °C. The SBA-15 prepared with Si/Na⁺ ratios ranging from 2.1 to 40 at 700 °C exhibited both cristobalite and quartz SiO₂ structures in pore walls. When the Na⁺ amount increased (i.e., Si/Na increased from 80 to 40), the pore size was increased remarkably but the surface area and pore volume of the metal ion-based SBA-15 were decreased. When the SBA-15 prepared with Li⁺, K⁺ and Ca²⁺ ions (Si/metal ion = 40) was thermally treated at 700 °C, the crystalline SiO₂ of quartz structure with large pore diameter (i.e., 802.5 Å) was observed for Ca⁺² ion-based SBA-15, while no crystalline SiO₂ structures were observed in pore walls for both the K⁺ and Li⁺ ions treated SBA-15. The crystalline SiO₂ structures may be formed by the rearrangement of silica matrix when alkali or alkali earth metal ions are inserted into silica matrix at elevated temperature.

Ultrahigh Adsorption Capacity and Kinetics of Vertically Oriented Mesoporous Coatings for Removal of Organic Pollutants

Highly efficient removal of organic pollutants currently is a main worldwide concern in water treatment, and highly challenging. Here, vertically oriented mesoporous coatings (MCs) with tunable surface properties and pore sizes have been developed via the single-micelle directing assembly strategy, which show good adsorption performances toward a wide range of organic pollutants. The micelle size and structure can be precisely regulated by oil molecules based on their n-octanol/water partition coefficients (Log P) in the oil-water diphase assembly system, which are critical to the pore size and pore surface property of the MCs. The affinity and steric effects of the MCs can be on-demand adjusted, as a result, the MCs show a ultrahigh adsorption capacity (263 mg g^-1 ), surface occupancy ratio (≈41.92%), and adsorption rate (≈10.85 mg g^-1  min^-1 ) for microcystin-LR, which is among the best performances up to date. The MCs also show an excellent universality to remove organic pollutants with different properties. Moreover, overcoming the challenges proposed by particulate absorbents, the MCs are stable and can be easily regenerated and reused without secondary contamination. This work paves a new route to the synthesis of high-quality MCs for water purification.

Removal of Pesticides from Waters by Adsorption: Comparison between Synthetic Zeolites and Mesoporous Silica Materials. A Review

Pesticides are pollutants found in wastewater due to increasing agricultural activities over the years. Inappropriate dosing of pesticides results in the dispersal of active ingredients in the environment. The complete removal of pesticides from wastewater is an immediate concern due to their high toxicity and mobility. At present, adsorption is one of the most widely used methods for pesticide removal, in which synthetic zeolites and mesoporous silica materials are extensively applied. This article presents a systematic and comparative review of the applications and comparison of these adsorbents, based on the data reported in the literature. The paper summarizes the information collected from various studies, including the type of adsorbents and pesticides used, experimental conditions, and results of each work. The studies analyzed were laboratory-based and show potential advantages for the treatment of pesticide-bearing waters using functionalized and unfunctionalized synthetic zeolites and mesoporous silica materials. As a whole, functionalized materials are reported to exhibit better removal performance for different pesticides than conventional materials. It is expected that the results of this review will help researchers to establish a powerful strategy for the abatement of pesticides in wastewater.

Multiple Roles of Mesoporous Silica in Safe Pesticide Application by Nanotechnology: A Review

Pollution related to pesticides has become a global problem due to their low utilization and non-targeting application, and nanotechnology has shown great potential in promoting sustainable agriculture. Nowadays, mesoporous silica-based nanomaterials have garnered immense attention for improving the efficacy and safety of pesticides due to their distinctive advantages of low toxicity, high thermal and chemical stability, and particularly size tunability and versatile functionality. Based on the introduction of the structure and synthesis of different types of mesoporous silica nanoparticles (MSNs), the multiple roles of mesoporous silica in safe pesticide application using nanotechnology are discussed in this Review: (i) as nanocarrier for sustained/controlled delivery of pesticides, (ii) as adsorbent for enrichment or removal of pesticides in aqueous media, (iii) as support of catalysts for degradation of pesticide contaminants, and (iv) as support of sensors for detection of pesticides. Several scientific issues, strategies, and mechanisms regarding the application of MSNs in the pesticide field are presented, with their future directions discussed in terms of their environmental risk assessment, in-depth mechanism exploration, and cost-benefit consideration for their continuous development. This Review will provide critical information to related researchers and may open up their minds to develop new advances in pesticide application.

Mesoporous Biopolymer Architecture Enhanced the Adsorption and Selectivity of Aqueous Heavy-Metal Ions

Halloysite nanotubes (HNT) and ball-milled biochar (BC) incorporated biocompatible mesoporous adsorbents (HNT-BC@Alg) were synthesized for adsorption of aqueous heavy-metal ions. HNT-BC@Alg outperformed the BC, HNT, and BC@Alg in removing cadmium (Cd), copper (Cu), nickel (Ni), and lead (Pb). Mesoporous structure (∼7.19 to 7.56 nm) of HNT-BC@Alg was developed containing an abundance of functional groups induced from encapsulated BC and tubular HNT, which allowed heavy metals to infiltrate and interact with the adsorbents. Siloxane groups from HNT, oxygen-containing functional groups from BC, and hydroxyl and carboxyl groups from alginate polymer play a significant role in the adsorption of heavy-metal ions. The removal percentage of heavy metals was recorded as Pb (∼99.97 to 99.05%) > Cu (∼95.01 to 90.53%) > Cd (∼92.5 to 55.25%) > Ni (∼80.85 to 50.6%), even in the presence of 0.01/0.001 M of CaCl₂ and Na₂SO₄ as background electrolytes and charged organic molecule under an environmentally relevant concentration (200 μg/L). The maximum adsorption capacities of Ni, Cd, Cu, and Pb were calculated as 2.85 ± 0.08, 6.96 ± 0.31, 16.87 ± 1.50, and 26.49 ± 2.04 mg/g, respectively. HNT-BC@Alg has fast sorption kinetics and maximum adsorption capacity within a short contact time (∼2 h). Energy-dispersive X-ray spectroscopy (EDS) elemental mapping exhibited that adsorbed heavy metals co-distributed with Ca, Si, and Al. The reduction of surface area, pore volume, and pore area of HNT-BC@Alg (after sorption of heavy metals) confirms that mesoporous surface (2-18 nm) supports diffusion, infiltration, and interaction. However, a lower range of mesoporous diameter of the adsorbent is more suitable for the adsorption of heavy-metal ions. The adsorption isotherm and kinetics fitted well with the Langmuir isotherm and the pseudo-second-order kinetic models, demonstrating the monolayer formation of heavy-metal ions through both the physical sorption and chemical sorption, including pore filling, ion exchange, and electrostatic interaction.

Effects of Residual Silanol on Solid Phase Extraction of Organic Compounds to Octadecylsilyl Silica

Batchwise equilibrium study was carried out on the retention of nonpolar and polar organic compounds to octadecylsilyl (ODS) silicas of different properties at atmospheric pressure. While nonpolar compounds were retained only by distribution on the ODS phase, polar compounds were retained by both distribution and Langmuir-type adsorption on residual silanol. Retention on ODS silica with more silanol proceeded at a higher rate than retention on ODS silica with less silanol and was reversible on this solid phase extraction time-scale. An increase in surface density of ODS decreased the distribution constant, due to a decrease in fraction of ODS functioning as an extracting medium and also decreased the saturated adsorption amount, due to reductions of the residual silanol and the functioning ODS. The ODS silica with the lowest ODS density showed a distribution constant 31 times higher and a saturated adsorption amount 27 times higher than the ODS silica with the highest ODS density. On the other hand, because the interaction between the organic part and the ODS group introduced at higher density is strengthened, the adsorption constant is increased by about 5 times compared to the low density ODS silica. The electronic effects of substituents to nitrogen- and oxygen-containing compounds on retention were discussed. In conclusion, ODS silica with an appreciable amount of residual silanol is superior for solid phase extraction.

Simultaneous removal of organic pollutants and heavy metals in wastewater by photoelectrocatalysis: A review

As a powerful technique by combining photocatalysis with electrochemistry, photoelectrocatalysis has been extensively explored to simultaneously remove mixed pollutants of organic and heavy metal in wastewater in the past decade. In the photoelectrocatalytic system, the bias potential can remarkably promote the oxidation of organic pollutants on the photoanode by suppressing the recombination of photogenerated electron-hole pairs and extending the lifetime of photogenerated holes. Meanwhile, some photogenerated electrons are driven by the bias potential to the cathode to reduce heavy metals. In this review, we summarize the research advances in photoelectrocatalytic treatment of organic-heavy metal mixed pollution systems under UV light, visible light and sunlight. We demonstrate the main operation variables affecting the photoelectrocatalytic removal processes of organic pollutants and heavy metals. The problems for utilization of solar energy in photoelectrocatalysis are discussed. Finally, this review proposes the perspectives for future development of photoelectrocatalysis to industrial applications.

Adsorption mechanism of Zn2+, Ni2+, Cd2+, and Cu2+ ions by carbon-based adsorbents: interpretation of the adsorption isotherms via physical modelling

A theoretical physicochemical and thermodynamic investigation of the adsorption of heavy metals Zn2+, Cd2+, Ni2+, and Cu2+on carbon-based adsorbents was performed with statistical physics fundaments. Particularly, the experimental adsorption isotherms of heavy metal removal, at 30°C and pH 5, using adsorbents obtained from the pyrolysis of three biomasses (cauliflower cores, broccoli stalks, and coconut shell) were modelled and interpreted with a homogeneous statistical physics adsorption model. Calculations indicated that the heavy metal adsorption with these carbon-based materials was a multi-ionic process where several ions interact simultaneously with the same carboxylic functional group on the adsorbent surface. Adsorption capacities for these metal ions and adsorbents were correlated with electronegativity theory, which established that the adsorbate with the highest electronegativity was more readily adsorbed by the carboxylic functional groups available on the adsorbent surfaces. Also, the chemical compositions of biomass precursors explained achieved adsorption capacities for these metallic ions. The best adsorbent for heavy metal removal was obtained from CC biomass pyrolysis. Calculated adsorption energies for heavy metal removal could be associated with physisorption-type forces. Finally, the adsorption mechanism analysis was complemented with the determination of adsorption thermodynamic functions using the statistical physics.

Synthesis of the magnetic core-shell bi-metallic and tri-metallic metal-organic framework nanocomposites for dye adsorption

Bi-metallic and tri-metallic metal-organic frameworks (MOFs) supported on the magnetic activated carbon (MAC) were synthesized for the reduction of methylene blue (MB) concentration in the aqueous solutions. The adsorbent nanocomposites were characterized by applying the general tests including XRD, FTIR, FESEM, TEM, BET, and VSM. The XRD achievements demonstrated that crystalline structure of MOFs was derived on the MAC by the presented method. The core-shell morphology with nano-scale size of the magnetic carbonaceous MOFs was detected in TEM and FESEM micro-images. The acceptable magnetic strength of the prepared adsorbents was proved by using the VSM analysis. The important operating conditions including pH and temperature were also evaluated, while the other parameters were kept constant. The pseudo-second-order kinetic model was matched with the experimental data to show the kinetic behavior of the multi-component MOFs. The isotherm studies showed that the good agreement between the experimental data with both Langmuir model and the maximum capacities was calculated to be about 66.51 and 71.43 mg/g for the bi-metallic and tri-metallic nanocomposites, respectively. Regeneration experiments indicated that the fabricated adsorbents have an excellent reusing adsorption capacity which can be a proper selection for the industrial applications. PRACTITIONER POINTS: Bi-metallic and tri-metallic MOFs supported on the magnetic activated carbon were synthesized by the facile preparation method. Adsorption of methylene blue by using MOFs were successfully done. Nanocomposites were evaluated by XRD, FTIR, BET, FESEM, TEM, and VSM techniques. Maximum of adsorption capacity was observed for tri-metallic MOF as 71.43 mg/g.

Treatment of Wastewaters with Zirconium Phosphate Based Materials: A Review on Efficient Systems for the Removal of Heavy Metal and Dye Water Pollutants

Layered zirconium phosphate (ZrP) is a versatile material with phosphate (POH ) groups able to exchange inorganic and organic cations or to intercalate basic molecules. The present review deals with the use of this material as a sorbent for heavy metal cations or dye molecules in wastewater treatments. The possibility to combine ZrP with polymers or other inorganic materials, in order to have suitable systems for real and large scale applications, was investigated, as well as the combination with photocatalytic materials to obtain hetrogeneous photocatalysts for the capture and photodegradation of organic dye molecules.

Recent advances in the design of inorganic and nano-clay particles for the treatment of brain disorders

Inorganic materials, in particular nanoclays and silica nanoparticles, have attracted enormous attention due to their versatile and tuneable properties, making them ideal candidates for a wide range of biomedical applications, such as drug delivery. This review aims at overviewing recent developments of inorganic nanoparticles (like porous or mesoporous silica particles) and different nano-clay materials (like montmorillonite, laponites or halloysite nanotubes) employed for overcoming the blood brain barrier (BBB) in the treatment and therapy of major brain diseases such as Alzheimer's, Parkinson's, glioma or amyotrophic lateral sclerosis. Recent strategies of crossing the BBB through invasive and not invasive administration routes by using different types of nanoparticles compared to nano-clays and inorganic particles are overviewed.

Efficient removal of chromate ions from aqueous solution using a highly cost-effective ferric coordinated [3-(2-aminoethylamino)propyl]trimethoxysilane-MCM-41 adsorbent

The present investigation involves synthesis and characterization of MCM-41-AEAPTMS-Fe(iii)Cl using coordinated Fe(iii) on MCM-41-AEAPTMS for efficient removal of hazardous Cr(vi) ions from aqueous solution. The adsorbent MCM-41-AEAPTMS-Fe(iii)Cl was characterized using small-angle X-ray diffraction (SAX), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier-transform infrared (FT-IR) and Brunauer-Emmett-Teller (BET) surface analyzer techniques. The BET surface area was found to be 87.598 m2 g-1. The MCM-41-AEAPTMS-Fe(iii)Cl effectively adsorbs Cr(vi) with an adsorption capacity acquiring the maximum value of 84.9 mg g-1 at pH 3 at 298 K. The data followed pseudo-second-order kinetics and obeyed the Langmuir isotherm model. The thermodynamic data proved the exothermic and spontaneous nature of Cr(vi) ion adsorption on MCM-41-AEAPTMS-Fe(iii). Further, the higher value of ΔH° (-64.339 kJ mol-1) indicated that the adsorption was chemisorption in nature.

Ultra-sensitive slot-waveguide-enhanced Raman spectroscopy for aqueous solutions of non-polar compounds using a functionalized silicon nitride photonic integrated circuit

We demonstrate an ultra-sensitive waveguide-enhanced Raman sensor for low concentration organic compounds dissolved in water. The spectra are obtained using silicon nitride slot waveguides coated with a thin film of hexamethyldisilazane-modified mesoporous silica. Enriched locally by 600-fold within the coating, a micromolar level of cyclohexanone is probed. The sensor is also capable of simultaneous quantification of multiple analytes, and the adsorbed analytes can be completely released from the coating. These properties make this on-chip Raman sensor promising for diverse applications, especially for the monitoring of non-polar organics and biomolecules in aqueous environments.

Recent Developments in Chitosan-Based Adsorbents for the Removal of Pollutants from Aqueous Environments

The quality of water is continuously under threat as increasing concentrations of pollutants escape into the aquatic environment. However, these issues can be alleviated by adsorbing pollutants onto adsorbents. Chitosan and its composites are attracting considerable interest as environmentally acceptable adsorbents and have the potential to remove many of these contaminants. In this review the development of chitosan-based adsorbents is described and discussed. Following a short introduction to the extraction of chitin from seafood wastes, followed by its conversion to chitosan, the properties of chitosan are described. Then, the emerging chitosan/carbon-based materials, including magnetic chitosan and chitosan combined with graphene oxide, carbon nanotubes, biochar, and activated carbon and also chitosan-silica composites are introduced. The applications of these materials in the removal of various heavy metal ions, including Cr(VI), Pb(II), Cd(II), Cu(II), and different cationic and anionic dyes, phenol and other organic molecules, such as antibiotics, are reviewed, compared and discussed. Adsorption isotherms and adsorption kinetics are then highlighted and followed by details on the mechanisms of adsorption and the role of the chitosan and the carbon or silica supports. Based on the reviewed papers, it is clear, that while some challenges remain, chitosan-based materials are emerging as promising adsorbents.

Mesoporous Silica Nanoparticles for Targeting Subcellular Organelles

Current chemotherapy treatments lack great selectivity towards tumoral cells, which leads to nonspecific drug distribution and subsequent side effects. In this regard, the use of nanoparticles able to encapsulate and release therapeutic agents has attracted growing attention. In this sense, mesoporous silica nanoparticles (MSNs) have been widely employed as drug carriers owing to their exquisite physico-chemical properties. Because MSNs present a surface full of silanol groups, they can be easily functionalized to endow the nanoparticles with many different functionalities, including the introduction of moieties with affinity for the cell membrane or relevant compartments within the cell, thus increasing the efficacy of the treatments. This review manuscript will provide the state-of-the-art on MSNs functionalized for targeting subcellular compartments, focusing on the cytoplasm, the mitochondria, and the nucleus.

Palladium nanoparticle loaded β-cyclodextrin monolith as a flow reactor for concentration enrichment and conversion of pollutants based on molecular recognition

This study reports pollutant remediation by a catalyst-loaded, β-cyclodextrin cross-linked polymer monolith. The monolith enabled removal of the pollutant to a residual concentration with no environmental effect and conversion of the adsorbed pollutant into useful compounds with enriched concentration, allowing for the adsorption capacity regeneration.

Application of micro/nanomaterials in adsorption and sensing of active ingredients in traditional Chinese medicine

Traditional Chinese medicine (TCM) has been widely applied for the prevention and cure of various diseases for centuries. Ingredient with pharmacological activity is the key to the application of TCM. Hence, it is of significance to separate and detect active ingredients in TCM effectively. Micro/nanomaterial is the promising candidate for adsorption and sensing due to its unique physical and chemical properties. For years, many efforts have been made to develop functional micro/nanomaterials to realize the effective adsorption or sensing of bioactive compounds in TCM. In this review, we discussed recent progresses in the application of various functional micro/nanomaterials for adsorption or detection (electrochemical detection, fluorescent detection, and colorimetric detection) of active ingredients. Based on the kind of matrix materials, micro/nano-adsorbents or sensors can be classified into following categories: metal-based micro/nanomaterials, porous materials, carbon-based materials, graphene/graphite-liked micro/nanomaterials and hybrid micro/nanomaterials.

Nanomaterials with Tailored Magnetic Properties as Adsorbents of Organic Pollutants from Wastewaters

Water quality has become one of the most critical issue of concern worldwide. The main challenge of the scientific community is to develop innovative and sustainable water treatment technologies with high efficiencies and low production costs. In recent years, the use of nanomaterials with magnetic properties used as adsorbents in the water decontamination process has received considerable attention since they can be easily separated and reused. This review focuses on the state-of-art of magnetic core–shell nanoparticles and nanocomposites developed for the adsorption of organic pollutants from water. Special attention is paid to magnetic nanoadsorbents based on silica, clay composites, carbonaceous materials, polymers and wastes. Furthermore, we compare different synthesis approaches and adsorption performance of every nanomaterials. The data gathered in this review will provide information for the further development of new efficient water treatment technologies.

Preparation of Nano-Porous Carbon-Silica Composites and Its Adsorption Capacity to Volatile Organic Compounds

Carbon-silica composites with nanoporous structures were synthesized for the adsorption of volatile organic compounds (VOCs), taking tetraethyl orthosilicate (TEOS) as the silicon source and activated carbon powder as the carbon source. The preparation conditions were as follows: the pH of the reaction system was 5.5, the hydrophobic modification time was 50 h, and the dosage of activated carbon was 2 wt%. Infrared spectrum analysis showed that the activated carbon was dispersed in the pores of aerogel to form the carbon-silica composites material. The static adsorption experiments, dynamic adsorption-desorption experiments, and regeneration experiments show that the prepared carbon-silica composites have microporous and mesoporous structures, the adsorption capacity for n-hexane is better than that of conventional hydrophobic silica gel, and the desorption performance is better than that of activated carbon. It still has a high retention rate of adsorption capacity after multiple adsorption-desorption cycles. The prepared carbon-silica composites material has good industrial application prospects in oil vapor recovery, providing a new alternative for solving organic waste gas pollution.