Citric Acid-Based Intrinsic Band-Shifting Photoluminescent Materials

Citric acid, an important metabolite with abundant reactive groups, has been demonstrated as a promising starting material to synthesize diverse photoluminescent materials including small molecules, polymers, and carbon dots. The unique citrate chemistry enables the development of a series of citric acid-based molecules and nanomaterials with intriguing intrinsic band-shifting behavior, where the emission wavelength shifts as the excitation wavelength increases, ideal for chromatic imaging and many other applications. In this review, we discuss the concept of "intrinsic band-shifting photoluminescent materials", introduce the recent advances in citric acid-based intrinsic band-shifting materials, and discuss their potential applications such as chromatic imaging and multimodal sensing. It is our hope that the insightful and forward-thinking discussion in this review will spur the innovation and applications of the unique band-shifting photoluminescent materials.

Magnifying the ESIPT process in tris(salicylideneanilines) via the steric effect - a pathway to the molecules with panchromatic fluorescence

Four tris(salicylideneanilines) (TSANs) with gradually increased steric interactions between the keto-enamine moiety and neighbouring phenyl substituent are presented. The steric interactions are induced by placing two alkyl groups at the ortho position in the N-aryl substituent. The impact of the steric effect over the radiative channels of deactivation of the excited state was evaluated through spectroscopic measurements and theoretical calculations using ab initio techniques. Our results show that the emission occurring after excited state intramolecular proton transfer (ESIPT) is favoured by placing the bulky groups in the ortho position of the N-phenyl ring of the TSAN. However, our TSANs seem to offer the opportunity to obtain a pronounced emission band at higher energy, significantly increasing the coverage of the visible spectrum, resulting in the enhancement of the dual emissive properties of tris(salicylideneanilines). Thus, TSANs may be promising molecules capable of white-like emission for use in organic electronic devices such as white OLEDs.

Emission Color Tuning and White Light Generation from a Trimolecular Cocktail in Cationic Micellar System with Promising Applicability in the Anticounterfeiting Technology

The development of photoluminescent (PL) systems, displaying multiple stimuli-responsive emission color tuning, has been the pressing priority in the recent times due to their huge role in contemporary lighting and anticounterfeiting technologies. Acknowledging this importance, we present a simple and eco-friendly PL system showing emission color tuning in response to different stimuli, that is, the composition of the system, pH, excitation wavelength, and the temperature with the plus point of getting significantly pure white light emission (WLE). The novel system is fabricated from the aqueous mixture of three organic fluorophores, umbelliferone (UMB), fluorescein (FLU), and Rhodamine-B (RB). By varying the fluorophore composition in the mixture at pH 12, nearly pure WLE with a Commission Internationale d'Eclairage (CIE) 1931 profile of (0.33, 0.33) was obtained at the excitation wavelength of 365 nm, the sustainability of which was ensured by employing the micellar self-assemblies of tetradecyltrimethylammonium bromide (TTAB) molecules. Similar WLE was obtained under mildly acidic conditions (pH 6) but at the excitation wavelength of 330 nm. By proper tuning of pH and the wavelengths of the system to use it as a fluorescent ink, we found a remarkable and highly applicable phenomenon observed for the first time, that is, triple-mode orthogonal emission color tuning with white light ON/OFF switching. We validate the vital applicability of this phenomenon in protecting the authenticity of the document with its hard-to-counterfeit property. The applicability of this phenomenon is also explored by synthesizing PVA-based fluorescent films from the tri-fluorophore mixture. Moreover, the emission color of the PL system was explored lucidly for its temperature dependence owing to the thermal responsiveness of RB emission, where the PL system proves to be a full-color RGB system.

Paintable Hybrids with Thermally Stable Dual Emission Composed of Tetraphenylethene-Integrated POSS and MEH-PPV for Heat-Resistant White-Light Luminophores

Thermally stable dual emission followed by white-light luminescence from hybrid materials is reported. Hybrid films were prepared with a spin-coating method with the mixture solution containing tetraphenylethene (TPE)-integrated polyhedral oligomeric silsesquioxane (POSS) and poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV). TPE-tethered POSS (TPE-POSS) showed high compatibility with MEH-PPV. Therefore, homogeneous films with variable concentrations of TPE-POSS were obtained. Owing to good dispersion of rigid silica cubes into matrices, POSS-containing films demonstrated high thermal stability toward molecular rearrangement by annealing as well as pyrolysis, similar to conventional polymer hybrids. Furthermore, it was found that TPE-POSS was able to enhance emission efficiencies, probably by suppressing chain aggregation. By modulating introduction ratios of TPE-POSS, dual-emission properties followed by white-light luminescence composed of cyan and orange emissions from TPE-POSS and MEH-PPV, respectively, were accomplished. It should be noted that these color balances can be preserved even in the high-temperature region (425 K). Finally, white-light luminescent materials with thermal durability were obtained.

An All-Photonic Molecular Amplifier and Binary Flip-flop

A chemical system is proposed that is capable of amplifying small optical inputs into large changes in internal composition, based on a feedback interaction between switchable fluorescence and visible-light photoswitching. This system would demonstrate bifurcating reaction kinetics under irradiation and reach one of two stable photostationary states depending on the initial composition of the system. This behavior would allow the system to act as a chemical realization of the flip-flop circuit, the fundamental element in sequential logic and binary memory storage. We use detailed numerical modeling to demonstrate the feasibility of the proposed behavior based on known molecular phenomena and comment on some of the conditions required to realize this system.

Single-Molecular White-Light Emitters and Their Potential WOLED Applications

White organic light-emitting diodes (WOLEDs) are superior to traditional incandescent light bulbs and compact fluorescent lamps in terms of their merits in ensuring pure white-light emission, low-energy consumption, large-area thin-film fabrication, etc. Unfortunately, WOLEDs based on multilayered or multicomponent (red, green, and blue (RGB)) emissive layers can suffer from some remarkable disadvantages, such as intricate device fabrication and voltage-dependent emission color, etc. Single molecules, which can emit white light, can be used to replace multiple emitters, leading to a simplified fabrication process, stable and reproducible WOLEDs. Recently, the performance of WOLEDs by using single molecules is catching up with that of the state-of-the-art devices fabricated by multicomponent emitters. Therefore, an increasing attention has been paid on single white-light-emitting materials for efficient WOLEDs. In this review, different mechanisms of white-light emission from a single molecule and the performance of single-molecule-based WOLEDs are collected and expounded, hoping to light up the interesting subject on single-molecule white-light-emitting materials, which have great potential as white-light emitters for illumination and lighting applications in the world.

An all-photonic full color RGB system based on molecular photoswitches

On-command changes in the emission color of functional materials is a sought-after property in many contexts. Of particular interest are systems using light as the external trigger to induce the color changes. Here we report on a tri-component cocktail consisting of a fluorescent donor molecule and two photochromic acceptor molecules encapsulated in polymer micelles and we show that the color of the emitted fluorescence can be continuously changed from blue-to-green and from blue-to-red upon selective light-induced isomerization of the photochromic acceptors to the fluorescent forms. Interestingly, isomerization of both acceptors to different degrees allows for the generation of all emission colors within the red-green-blue (RGB) color system. The function relies on orthogonally controlled FRET reactions between the blue emitting donor and the green and red emitting acceptors, respectively.

Stimuli-responsive multicolor luminescent materials typically react on external triggers of physical nature, but photonically controlled systems which allow for remote operation were not realized. Here the authors use light as the stimulus of a responsive luminescent material which eliminates the need for physical access.

Electron transfer across a spiro link: extreme solvatofluorochromism of a compact spiro-bridged N,N-dimethylaniline-phthalide dyad

Ultrafast intramolecular electron transfer over a spiro link leads to record-breaking solvatofluorochromism [11 600 cm⁻¹, from 357 (hexane) to 595 nm (acetonitrile)].

White light emission from a mixture of silicon quantum dots and gold nanoclusters and its utilities in sensing of mercury(ii) ions and thiol containing amino acid

White light emitting mixture (WLEM) was produced by controlled mixing of blue emitting silicon quantum dots (Si QDs) and orange red emitting gold nanoclusters (Au NCs). The chromaticity color co-ordinate of the WLEM studied using CIE (Commission Internationale del'Eclairage) diagram was found to be (0.33, 0.32), which was very close to that of perfect white light emitting source. The WLEM can also be achieved in the form of gel, solid and film with nearly the same CIE co-ordinates which enhances its utility as white light-emitting source in solid state devices. The reversible and thermo-responsive behaviour of the WLEM broadens its application in thermal sensing. Furthermore, the system was found to be showing fast, sensitive and selective detection of Hg²⁺ ions and thiol containing amino acid cysteine.

A simple solution based approach for generation of WLEM and its utilities in sensing of Hg²⁺ ions and cysteine.

Intense White Molecular Fluorescence from Naphthoxazole-Quinoline Derivatives

Naphthoxazole derivatives are small heterocyclic compounds endowed with outstanding fluorescence properties. In this work, we report a detailed study of the intense white light fluorescence observed in naphthoxazole-quinoline dyads in solvent mixtures including at least a strong hydrogen bonding solvent. The same phenomenon was also studied in inclusion complexes naphthoxazole derivatives-sulfonated-βCD either in aqueous solution as well as in solid phase. A novel mechanism of white molecular fluorescence generation based on solvent-to-fluorophore proton transfer facilitated by ground state hydrogen bonding was characterized. The emission combines both, a blue charge transfer fluorescence emitted by the locally excited singlet state along with a red-shifted emission from a proton transfer complex.

Luminescent properties of benzothiazole derivatives and their application in white light emission

A saturated white-light emission was obtained by dispersing three benzothiazole analogues into a solid PMMA matrix. This skillfully avoids the detrimental energy transfer between doped dyes providing a simple approach for fabrication of white-light emitting devices.

Phenazine-Based Ratiometric Hg2+ Probes with Well-Resolved Dual Emissions: A New Sensing Mechanism by Vibration-Induced Emission (VIE)

Phenazines exhibit intriguing vibration-induced emission (VIE) owing to the fast intrinsic vibration of benzo[a,c]phenazine moiety. For the first time, a phenazine-based ratiometric fluorescent probe DBPST is developed for recognizing Hg²⁺ via restriction of VIE. Upon binding with Hg²⁺ , DBPST demonstrates two well-resolved emission peaks (over 130 nm) with a wide tuning color and affords a large signal-to-background ratio.

Emission color tuning and white-light generation based on photochromic control of energy transfer reactions in polymer micelles

We encapsulate a fluorescent donor molecule and a photochromic acceptor unit (photoswitch) in polymer micelles and show that the color of the emitted fluorescence is continuously changed from blue to yellow upon light-induced isomerization of the acceptor. Interestingly, white-light generation is achieved in between. With the photoswitch in the colorless form, intense blue emission from the donor is observed, while UV-induced isomerization to the colored form induces an energy transfer reaction that quenches the donor emission and sensitizes the yellow emission from the colored photoswitch. The process is reversed by exposure to visible light, triggering isomerization to the colorless form.

Photophysics of crystal violet lactone in reverse micelles and its dual behaviour

The photophysics of Crystal Violet Lactone (CVL) in aqueous and non aqueous reverse micelles (RMs) have been studied. It was observed that in RMs, the CT_A → CT_B transformation is retarded.

A series of MOFs based on a triangular tri(4-pyridylphenyl)amine ligand combined with carboxylate or nitrate auxiliary ligands

A series of new metal–organic frameworks based on a triangular tri(4-pyridylphenyl)amine (TPPA) ligand that possess novel structures and features have been successfully synthesized and structurally characterized in detail.

Intramolecular charge transfer with crystal violet lactone in acetonitrile as a function of temperature: reaction is not solvent-controlled

Intramolecular charge transfer (ICT) with crystal violet lactone (CVL) in the excited singlet state takes place in solvents more polar than n-hexane, such as ethyl acetate, tetrahydrofuran, and acetonitrile (MeCN). In these solvents, the fluorescence spectrum of CVL consists of two emission bands, from a locally excited (LE) and an ICT state. The dominant deactivation channel of the lowest excited singlet state is internal conversion, as the quantum yields of fluorescence (0.007) and intersystem crossing (0.015) in MeCN at 25 °C are very small. CVL is a weakly coupled electron donor/acceptor (D/A) molecule, similar to an exciplex (1)(A(-)D(+)). A solvatochromic treatment of the LE and ICT emission maxima results in the dipole moments μe(LE) = 17 D and μe(ICT) = 33 D, much larger than those previously reported. This discrepancy is attributed to different Onsager radii and spectral fluorimeter calibration. The LE and ICT fluorescence decays of CVL in MeCN are double exponential. As determined by global analysis, the LE and ICT decays at 25 °C have the times τ2 = 9.2 ps and τ1 = 1180 ps, with an amplitude ratio of 35.3 for LE. From these parameters, the rate constants ka = 106 × 10(9) s(-1) and kd = 3.0 × 10(9) s(-1) of the forward and backward reaction in the LE ⇄ ICT equilibrium are calculated, resulting in a free enthalpy difference ΔG of -8.9 kJ/mol. The amplitude ratio of the ICT fluorescence decay equals -1.0, which signifies that the ICT state is not prepared by light absorption in the S0 ground state, but originates exclusively from the directly excited LE precursor. From the temperature dependence of the fluorescence decays of CVL in MeCN (-45 to 75 °C), activation energies E(a) = 3.9 kJ/mol (LE → ICT) and E(d) = 23.6 kJ/mol (ICT → LE) are obtained, giving an enthalpy difference ΔH (= E(a) - E(d)) of -19.7 kJ/mol, and an entropy difference ΔS = -35.5 J mol(-1) K(-1). These data show that the ICT reaction of CVL in MeCN is not barrierless. The ICT reaction time of 9.2 ps is much longer than the mean solvent relaxation time of MeCN (0.26 ps), indicating, in contrast with earlier reports in the literature, that the reaction is not solvent controlled. This conclusion is supported by the observation of double exponential LE and ICT fluorescence with the same decay times.