Selective generation of single-walled carbon nanotubes with metallic, semiconducting and other unique electronic properties

Spatially confined growth of carbon nanotubes in the pore channels of microporous ceramic supports with improved filtration efficiency

Carbon nanotubes (CNTs) with high degrees of uniformity, orientation and controlled dimensions on porous supports are highly desirable for various applications such as separation of O/W emulsions and air purification. In this work, CNTs were fabricated on silicon carbide (SiC) porous supports with different porosities and pore sizes by chemical vapor deposition (CVD). The growth processes of CNTs on the surface and in the pore channels of the SiC support were studied in detail. Based on microstructural characterization by SEM, Raman spectroscopy and TEM, it was found that these CNTs grown in the pore channels of SiC supports had a higher degree of orientation and purity than those grown on the surface due to the spatially confined effect. The growth processes of various types of CNTs on the microporous supports were proposed, which were further verified by CNTs with different steric configurations (S-CNTs and VACNTs) and on Al₂O₃ porous supports. Moreover, the contribution of CNTs in the pore channels to the filtration efficiency was demonstrated in oil-water emulsion separation and particle removal in air. This work provides significant guidance for the preparation and filtration application of CNTs on porous materials.

Nano-Bioelectronics

Nano-bioelectronics represents a rapidly expanding interdisciplinary field that combines nanomaterials with biology and electronics and, in so doing, offers the potential to overcome existing challenges in bioelectronics. In particular, shrinking electronic transducer dimensions to the nanoscale and making their properties appear more biological can yield significant improvements in the sensitivity and biocompatibility and thereby open up opportunities in fundamental biology and healthcare. This review emphasizes recent advances in nano-bioelectronics enabled with semiconductor nanostructures, including silicon nanowires, carbon nanotubes, and graphene. First, the synthesis and electrical properties of these nanomaterials are discussed in the context of bioelectronics. Second, affinity-based nano-bioelectronic sensors for highly sensitive analysis of biomolecules are reviewed. In these studies, semiconductor nanostructures as transistor-based biosensors are discussed from fundamental device behavior through sensing applications and future challenges. Third, the complex interface between nanoelectronics and living biological systems, from single cells to live animals, is reviewed. This discussion focuses on representative advances in electrophysiology enabled using semiconductor nanostructures and their nanoelectronic devices for cellular measurements through emerging work where arrays of nanoelectronic devices are incorporated within three-dimensional cell networks that define synthetic and natural tissues. Last, some challenges and exciting future opportunities are discussed.

Nanotube Electromechanics beyond Carbon: The Case of WS2

The incorporation of nanostructures into nanoelectronic and nanoelectromechanical systems is a long sought-after goal. In the present article, we report the first torsional electromechanical measurements of pure inorganic nanotubes. The WS2 nanotubes exhibited a complex and reproducible electrical response to mechanical deformation. We combined these measurements with density-functional-tight-binding calculations to understand the interplay between mechanical deformation, specifically torsion and tension, and electrical properties of WS2 nanotubes. This yielded the understanding that the electrical response to mechanical deformation may span several orders of magnitude on one hand and detect several modes of mechanical deformation simultaneously on the other. These results demonstrate that inorganic nanotubes could thus be attractive building blocks for nanoelectromechanical systems such as highly sensitive nanometric motion sensors.

Carbon Nanotubes for Dye-Sensitized Solar Cells

As one type of emerging photovoltaic cell, dye-sensitized solar cells (DSSCs) are an attractive potential source of renewable energy due to their eco-friendliness, ease of fabrication, and cost effectiveness. However, in DSSCs, the rarity and high cost of some electrode materials (transparent conducting oxide and platinum) and the inefficient performance caused by slow electron transport, poor light-harvesting efficiency, and significant charge recombination are critical issues. Recent research has shown that carbon nanotubes (CNTs) are promising candidates to overcome these issues due to their unique electrical, optical, chemical, physical, as well as catalytic properties. This article provides a comprehensive review of the research that has focused on the application of CNTs and their hybrids in transparent conducting electrodes (TCEs), in semiconducting layers, and in counter electrodes of DSSCs. At the end of this review, some important research directions for the future use of CNTs in DSSCs are also provided.

Interfacing proteins with graphitic nanomaterials: from spontaneous attraction to tailored assemblies

Thiscritical reviewpresents a detailed overview of the chemico-physical principles ruling the non-covalent association between proteins and fullerene, carbon nanotubes and graphene towards the creation of fascinating and innovative hybrid materials for biotechnological applications.

Selective removal of metallic single-walled carbon nanotubes in full length by organic film-assisted electrical breakdown

An organic film-assisted electrical breakdown technique is proposed to selectively remove metallic (m-) single-walled carbon nanotubes (SWNTs) in full length towards creation of pure semiconducting SWNT arrays which are available for the large-scale fabrication of field effect transistors (FETs). The electrical breakdown of horizontally aligned SWNT arrays embedded in organic films resulted in a maximum removal length of 16.4 μm. The removal of SWNTs was confirmed using scanning electron microscopy and Raman mapping measurements. The on/off ratios of FETs were improved up to ca. 10,000, similar to that achieved for in-air breakdown. The experimental results suggest that exothermic oxidation of organic films induces propagation of oxidation reaction, hence the long-length removal of m-SWNTs.

Field-effect transistors based on WS2 nanotubes with high current-carrying capacity

We report the first transistor based on inorganic nanotubes exhibiting mobility values of up to 50 cm(2) V(-1) s(-1) for an individual WS2 nanotube. The current-carrying capacity of these nanotubes was surprisingly high with respect to other low-dimensional materials, with current density at least 2.4 × 10(8) A cm(-2). These results demonstrate that inorganic nanotubes are promising building blocks for high-performance electronic applications.

Enrichment of Large-Diameter Single-Walled Carbon Nanotubes (SWNTs) with Metallo-Octaethylporphyrins

We report here a detailed experimental investigation on noncovalent functionalization of single-walled carbon nanotubes (SWNTs) with four different metallo-octaethylporphyrins (MOEPs). It has been found that the identity of the center metal of MOEP strongly influences the solubilization of SWNTs. MnOEPs and ZnOEPs successfully extracted SWNTs in methanol, as confirmed by absorption spectroscopy, while CoOEPs and CuOEPs were not able to extract SWNTs at all. Atomic force microscopy (AFM) studies revealed that large SWNTs bundles could be exfoliated into either individual SWNTs or very small bundles by complexation with ZnOEP molecules. As for enrichment of SWNTs, ZnOEPs and MnOEPs show similar diameter discrimination ability toward 76-CoMoCAT, providing the extracted SWNTs with relatively large diameters.

Spectroscopic characterization of the chiral structure of individual single-walled carbon nanotubes and the edge structure of isolated graphene nanoribbons

The chiral structure of single-walled carbon nanotubes (SWNTs) and the edge structure of graphene nanoribbons (GNRs) play an important role in determining their electronic and phonon structures. Spectroscopic methods, which require simple sample preparation and cause minimal sample damage, are the most commonly utilized techniques for determining the structures of SWNTs and graphene. In this review the current status of various spectroscopic methods are presented in detail, including resonance Raman, photoluminescence (PL), and Rayleigh scattering spectroscopies, for determination of the chiral structure of individual SWNTs and the edge structure of isolated graphene, especially of graphene nanoribbons. The different photophysical processes involved in each spectroscopic method are reviewed to achieve a comprehensive understanding of the electronic and phonon properties of SWNTs and graphene. The advantages and limitations of each spectroscopic method as well as the challenges in this area are discussed.

Multiwall nanotubes, multilayers, and hybrid nanostructures: new frontiers for technology and Raman spectroscopy

Technological progress is determined, to a great extent, by developments in material science. Breakthroughs can happen when a new type of material or new combinations of known materials with different dimensionality and functionality are created. Multilayered structures, being planar or concentric, are now emerging as major players at the forefront of research. Raman spectroscopy is a well-established characterization technique for carbon nanomaterials and is being developed for layered materials. In this issue of ACS Nano, Hirschmann et al. investigate triple-wall carbon nanotubes via resonant Raman spectroscopy, showing how a wealth of information can be derived about these complex structures. The next challenge is to tackle hybrid heterostructures, consisting of different planar or concentric materials, arranged "on demand" to achieve targeted properties.

Supramolecular hybrid of metal nanoparticles and semiconducting single-walled carbon nanotubes wrapped by a fluorene-carbazole copolymer

The first approach for the preparation of metal nanoparticle/semiconducting single-walled carbon nanotube (SWNT) hybrids with specified chirality is described. For this purpose, a copolymer of a fluorene derivative with two long-chain alkyl substituents and a carbazole derivative carrying a thiol group was used. The copolymer was found to selectively dissolve (7,6)- and (8,7)SWNTs, as determined by UV/Vis/NIR absorption and Raman spectroscopy and 2D photoluminescence mapping. Gold and silver nanoparticles with diameters of about 3.8 and about 3.2 nm, respectively, were readily attached along the SWNTs by means of coordination bonds between the nanoparticles and the thiol moieties on the copolymer, as revealed by atomic force and electron microscopy studies. The study provides a novel way to design and fabricate metal nanoparticle/semiconducting SWNT hybrids with specific nanotube chirality.

Separated metallic and semiconducting single-walled carbon nanotubes: opportunities in transparent electrodes and beyond

Ever since the discovery of single-walled carbon nanotubes (SWNTs), there have been many reports and predictions on their superior properties for use in a wide variety of potential applications. However, an SWNT is either metallic or semiconducting; these properties are distinctively different in electrical conductivity and many other aspects. The available bulk-production methods generally yield mixtures of metallic and semiconducting SWNTs, despite continuing efforts in metallicity-selective nanotube growth. Presented here are significant advances and major achievements in the development of postproduction separation methods, which are now capable of harvesting separated metallic and semiconducting SWNTs from different production sources with sufficiently high enrichment and quantities for satisfying at least the needs in research and technological explorations. Opportunities and some available examples for the use of metallic SWNTs in transparent electrodes and semiconducting SWNTs in various device nanotechnologies are highlighted and discussed.

Preparation of supported Mo(2)C-based catalysts from organic-inorganic hybrid precursor for hydrogen production from methanol decomposition

An effective and safe route is proposed to prepare supported Mo(2)C-based catalysts from organic-inorganic hybrids, which exhibit high activity and stability for producing H(2) from methanol catalytic decomposition.

A Comprehensive Review on Separation Methods and Techniques for Single-Walled Carbon Nanotubes

Structural control of single-walled carbon nanotubes (SWNTs) is attracting enormous interest in view of their applications to nanoelectronics and nanooptics. Actually, more than 200 papers regarding separation of SWNTs have been published since 1998. In this review, they are classified into the following five sections according to the separation methods; electrophoresis, centrifugation, chromatography, selective solubilization and selective reaction. In each method, all literature is summarized in tables showing the separated objects (metallic/semiconducting (M/S), length, diameter, (n, m) structure and/or handedness), the production process of the used SWNTs (CoMoCAT, HiPco, arc discharge and/or laser vaporization) and the employed chemicals, such as detergents and polymers. Changes in annual number of publications related to this subject are also discussed.

One-dimensional CdS nanostructures: synthesis, properties, and applications

One-dimensional (1D) semiconductor nanostructures are of prime interest due to their potential in investigating the size and dimensionality dependence of the materials' physical properties and constructing nanoscale electronic and optoelectronic devices. Cadmium sulfide (CdS) is an important semiconductor compound of the II-VI group, and its synthesis and properties have been of growing interest owing to prominent applications in several fields. This article provides a comprehensive review of the state-of-the-art research activities that focus on the rational synthesis, novel properties and unique applications of 1D CdS nanostructures in nanotechnology. It begins with the rational design and synthesis of 1D CdS nanostructures, and then highlights a range of unique properties and applications (e.g. photoluminescence, cathodoluminescence, electrochemiluminescence, photocatalysis, lasers, waveguides, modulators, solar cells, field-effect transistors, photodetectors, field-emitters, and nanogenerators) associated with them. Finally, the review is concluded with the author outlook of the perspectives with respect to future research on 1D CdS nanostructures.