Surface coating induced room-temperature phosphorescence in flexible organic single crystals

Materials exhibiting room temperature phosphorescence (RTP) are in high demand for signage, information encryption, sensing, and biological imaging. Due to weak spin-orbit coupling and other non-radiative processes that effectively quench the triplet excited states, RTP is sparsely observed in organic materials. Although the incorporation of a heavy atom through covalent or non-covalent modification circumvents these drawbacks, heavy-atom-containing materials are undesirable because of their deleterious side effects. Here, we designed and synthesized a new naphthalidenimine-boron complex as a coating material for the single crystals of 4,4'-dimethoxybenzophenone. The coated surface was observed to exhibit yellowish-green phosphorescence with ms lifetimes at ambient conditions through Förster resonance energy transfer (FRET). Importantly, the mechanical flexibility of the single crystals was observed to be retained after coating. The fluorescence-phosphorescence dual emission was utilised for colour-tunable optical waveguiding and anti-counterfeiting applications. As organic single crystals that can sustain mechanical deformations are emerging as the next-generation materials for electronic device fabrication, the flexible RTP organic crystals showing colour-tuneable optical waveguiding could be omnipotent in electronics.

Gas Release as an Efficient Strategy to Tune Mechanical Properties and Thermoresponsiveness of Dynamic Molecular Crystals

Dynamic molecular crystals combining multiple and finely tunable functionalities are attracting and an increasing attention due to their potential applications in a broad range of fields as efficient energy transducers and stimuli-responsive materials. In this context, a multicomponent organic salt, piperazinium trifluoroacetate (PZTFA), endowed with an unusual multidimensional responsive landscape is reported. Crystals of the salt undergo smooth plastic deformation under mechanical stress and thermo-induced jumping. Furthermore, via controlled crystal bending and release of trifluoroacetic acid from the lattice, which is anticipated from the design of the material, both the mechanical response and the thermoresponsive behavior are efficiently tuned while partially preserving the crystallinity of the system. In particular, mechanical deformation hampers guest release and hence the macroscopic jumping effect, while trifluoroacetic acid release stiffens the crystals. These complex adaptive responses establish a new crystal engineering strategy to gain further control over dynamic organic crystals.

Mechanoresponsive Flexible Crystals

Flexible crystals have gained significant attention owing to their remarkable pliability, plasticity, and adaptability, making them highly popular in various research and application fields. The main challenges in developing flexible crystals lie in the rational design, preparation, and performance optimization of such crystals. Therefore, a comprehensive understanding of the fundamental origins of crystal flexibility is crucial for establishing evaluation criteria and design principles. This Perspective offers a retrospective analysis of the development of flexible crystals over the past two decades. It summarizes the elastic standards and possible plastic bending mechanisms tailored to diverse flexible crystals and analyzes the assessment of their theoretical basis and applicability. Meanwhile, the compatibility between crystal elasticity and plasticity has been discussed, unveiling the immense prospects of elastic/plastic crystals for applications in biomedicine, flexible electronic devices, and flexible optics. Furthermore, this Perspective presents state-of-the-art experimental avenues and analysis methods for investigating molecular interactions in molecular crystals, which is vital for the future exploration of the mechanisms of crystal flexibility.

Molecular complexes of drug combinations: A review of cocrystals, salts, coamorphous systems and amorphous solid dispersions

As the advancements in the medical technology and healthcare develop through the years, combinational therapy has evolved to be an important treatment modality in many disease settings, including cancer, cardiovascular disease and infectious diseases. In an effort to alleviate "pill burden" and improve patient compliance, fixed dose combinations (FDCs) have been developed to be used as effective therapeutics. Among all FDCs, the category of drug-drug molecular complexes has been proven an efficient methodology in designing and treating diseases, with many drugs being approved. Among all drug-drug molecular complexes, drug-drug cocrystals, salts, coamorphous systems and solid dispersions have been successfully developed and many have been approved by the FDA. In this review, we dwell deeply into the molecular mechanisms behind the different types of drug-drug molecular complexes, including the key functional groups involved in the intermolecular interactions, the applications of each category of molecular complexes, as well as the advantages and challenges thereof. This comprehensive review provides useful insights into the practical design and manufacture of drug-drug molecular complexes and points out the future direction for the development of new advantageous combinational therapies that benefit more patients.

A comparative study of structural and spectroscopic properties of three structurally similar mechanically bending organic single crystals - 2-Amino-3-nitro-5-halo (halo = Cl, Br, or I) pyridine

In recent years, scientists have been very interested in single crystals of monoaromatic compounds with mechanical softness, but they are hard to find. The present work reports a comparative study of structural, spectroscopic, and quantum chemical investigations of three structurally similar mechanically bending monoaromatic compounds, namely, 2-amino-3-nitro-5-chloro pyridine (I), 2-amino-3-nitro-5-bromo pyridine (II), and 2-amino-3-nitro-5-iodo pyridine (III). The mechanical responses of the three organic crystals studied here are very intriguing due to the similarity of their chemical structures, which only differ in the presence of halogen atoms (Cl, Br, and I) at the fifth position of the pyridine ring and are explained through examining intermolecular interaction energies from energy frameworks analysis, slip layer topology, and Hirshfeld surface analysis. The crystals of all the three feature one dimensional ribbons comprising alternating NaminoH⋯Onitro and NaminoH⋯Npyridine hydrogen bonds that form R22(12) and R22(8) dimeric rings, respectively. In (III), weak I⋯I interactions link the adjacent ribbons forming a two dimensional sheet. Layer-like structures are observed in all three crystals, with no significant interactions between the adjacent architectures (ribbons or sheets). Energy framework calculations are used for estimating the bending ability of the three compounds, with the three following the order Cl ≪ Br < I. The iterative electrostatic scheme coupled with the supermolecule approach (SM) at the DFT/CAM-B3LYP/aug-cc-pVTZ level is used to calculate the third-order nonlinear susceptibility (χ3) values in a simulated crystalline environment for the static case as well as two typical electric field frequency values, (λ = 1064 nm) and (λ = 532 nm). In addition, estimates of the topological studies (localized orbital locator and electron localization function) and reactivity characteristics (global reactivity parameters, molecular electrostatic potential, and Fukui function) are made for the compounds under investigation. Docking studies done using AutoDock software with a protein target (PDB ID: 6CM4) revealed that three compounds could be used to treat Alzheimer's disease.

Recent Advances in Nanomechanical Measurements and Their Application for Pharmaceutical Crystals

Mechanical behavior of pharmaceutical crystals directly impacts the formulation development and manufacturing of drug products. The understanding of crystal structure-mechanical behavior of pharmaceutical and molecular crystals has recently gained substantial attention among pharmaceutical and materials scientists with the advent of advanced nanomechanical testing instruments like nanoindentation. For the past few decades, instrumented nanoindentation was a popular technique for measuring the mechanical properties of thin films and small-length scale materials. More recently it is being implemented to investigate the mechanical properties of pharmaceutical crystals. Integration of correlative microscopy techniques and environmental control opened the door for advanced structure-property correlation under processing conditions. Preventing the degradation of active pharmaceutical ingredients from external factors such as humidity, temperature, or pressure is important during processing. This review deals with the recent developments in the synchronized nanomechanical measurements of pharmaceutical crystals toward the fast and effective development of high-quality pharmaceutical drug products. This review also summarizes some recent reports to intensify how one can design and control the nanomechanical properties of pharmaceutical solids. Measurement challenges and the scope for studying nanomechanical properties of pharmaceutical crystals using nanoindentation as a function of crystal structure and in turn to develop fundamental knowledge in the structure-property relationship with the implications for drug manufacturing and development are discussed in this review. This review further highlights recently developed capabilities in nanoindentation, for example, variable temperature nanoindentation testing, in situ imaging of the indented volume, and nanoindentation coupled Raman spectroscopy that can offer new quantitative details on nanomechanical behavior of crystals and will play a decisive role in the development of coherent theories for nanomechanical study of pharmaceutical crystal.

Modulating Thermal Properties of Polymers through Crystal Engineering

Crystal engineering has exclusively focused on the development of advanced materials based on small organic molecules. We now demonstrate how the cocrystallization of a polymer yields a material with significantly enhanced thermal stability but equivalent mechanical flexibility. Isomorphous replacement of one of the cocrystal components enables the formation of solid solutions with melting points that can be readily fine-tuned over a usefully wide temperature range. The results of this study credibly extend the scope of crystal engineering and cocrystallization from small molecules to polymers.

Non-stoichiometric carbamazepine cocrystal hydrates of 3,4-/3,5-dihydroxybenzoic acids: coformer-water exchange

The cocrystallisation of carbamazepine (CBZ) with 3,4-/3,5-dihydroxybenzoic acids (34/35DHBA) with different stoichiometries formed molecular alloys, exchanging a water molecule, in their isostructural CBZ dihydrate form. Furthermore, we show a correlation between the mechanical properties of the CBZ-DHBA cocrystals with the amount of coformer present.

Role of Crystal Disorder and Mechanoactivation in Solid-State Stability of Pharmaceuticals

Common energy-intensive processes applied in oral solid dosage development, such as milling, sieving, blending, compaction, etc. generate particles with surface and bulk crystal disorder. An intriguing aspect of the generated crystal disorder is its evolution and repercussion on the physical- and chemical stabilities of drugs. In this review, we firstly examine the existing literature on crystal disorder and its implications on solid-state stability of pharmaceuticals. Secondly, we discuss the key aspects related to the generation and evolution of crystal disorder, dynamics of the disordered/amorphous phase, analytical techniques to measure/quantify them, and approaches to model the disordering propensity from first principles. The main objective of this compilation is to provide special impetus to predict or model the chemical degradation(s) resulting from processing-induced manifestation in bulk solid manufacturing. Finally, a generic workflow is proposed that can be useful to investigate the relevance of crystal disorder on the degradation of pharmaceuticals during stability studies. The present review will cater to the requirements for developing physically- and chemically stable drugs, thereby enabling early and rational decision-making during candidate screening and in assessing degradation risks associated with formulations and processing.

Polymorphs with Remarkably Distinct Physical and/or Chemical Properties

Polymorphism in crystals is known since 1822 and the credit goes to Mitscherlich who realized the existence of different crystal structures of the same compound while working with some arsenate and phosphate salts. Later on, this phenomenon was observed also in organic crystals. With the advent of different technologies, especially the easy availability of single crystal XRD instruments, polymorphism in crystals has become a common phenomenon. Almost 37 % of compounds (single component) are polymorphic to date. As the energies of the different polymorphic forms are very close to each other, small changes in crystallization conditions might lead to different polymorphic structures. As a result, sometimes it is difficult to control polymorphism. For this reason, it is considered to be a nuisance to crystal engineering. It has been realized that the property of a material depends not only on the molecular structure but also on its crystal structure. Therefore, it is not only of interest to academia but also has widespread applications in the materials science as well as pharmaceutical industries. In this review, we have discussed polymorphism which causes significant changes in materials properties in different fields of solid-state science, such as electrical, magnetic, SHG, thermal expansion, mechanical, luminescence, color, and pharmaceutical. Therefore, this review will interest researchers from supramolecular chemistry, materials science as well as medicinal chemistry.

Plastic bending in a semiconducting coordination polymer crystal enabled by delamination

Coordination polymers (CPs) are a class of crystalline solids that are considered brittle, due to the dominance of directional coordination bonding, which limits their utility in flexible electronics and wearable devices. Hence, engineering plasticity into functional CPs is of great importance. Here, we report plastic bending of a semiconducting CP crystal, Cu-Trz (Trz = 1,2,3-triazolate), that originates from delamination facilitated by the discrete bonding interactions along different crystallographic directions in the lattice. The coexistence of strong coordination bonds and weak supramolecular interactions, together with the unique molecular packing, are the structural features that enable the mechanical flexibility and anisotropic response. The spatially resolved analysis of short-range molecular forces reveals that the strong coordination bonds, and the adaptive C–H···π and Cu···Cu interactions, synergistically lead to the delamination of the local structures and consequently the associated mechanical bending. The proposed delamination mechanism offers a versatile tool for designing the plasticity of CPs and other molecular crystals.

Catalytic Stereoconvergent Synthesis of Homochiral β-CF3, β-SCF3, and β-OCF3 Benzylic Alcohols

We describe an efficient catalytic strategy for enantio- and diastereoselective synthesis of homochiral β-CF₃, β-SCF₃, and β-OCF₃ benzylic alcohols. The approach is based on dynamic kinetic resolution (DKR) with Noyori–Ikariya asymmetric transfer hydrogenation leading to simultaneous construction of two contiguous stereogenic centers with up to 99.9% ee, up to 99.9:0.1 dr, and up to 99% isolated yield. The origin of the stereoselectivity and racemization mechanism of DKR is rationalized by density functional theory calculations. Applicability of the previously inaccessible chiral fluorinated alcohols obtained by this method in two directions is further demonstrated: As building blocks for pharmaceuticals, illustrated by the synthesis of heat shock protein 90 inhibitor with in vitro anticancer activity, and in particular, needle-shaped crystals of representative stereopure products that exhibit either elastic or plastic flexibility, which opens the door to functional materials based on mechanically responsive chiral molecular crystals.

Recrystallization solvent-dependent elastic/plastic flexibility of an n-dodecyl-substituted tetrachlorophthalimide

A long alkyl-chained organic molecule, 4,5,6,7-tetrachloro-2-dodecylisoindoline-1,3-dione (1), was crystallized into needle-like crystals in dichloromethane (1DCM) or plate-like ones in tetrahydrofuran (1THF) depending on the recrystallisation solvent. X-ray crystallography analyses revealed the alkyl chains of the molecules, in which they were assembled differently, with the former responding flexibly bendable and elastic deformation, and the later being a permanent plastic one by external mechanical stress. The elastic modulus (E) and hardness (H) indicating both compliant and soft nature, reflecting their weak interaction in crystals, were quantified from the nano-indentation test.

Mechanophotonics - a guide to integrating microcrystals toward monolithic and hybrid all-organic photonic circuits

Molecular crystals are emerging as a non-silicon alternative for the construction of all-organic photonic integrated circuits (OPICs). The advent of flexible molecular crystals and the development of atomic force microscopy tip-based mechanical micromanipulation (mechanophotonics) techniques facilitate the construction of many proof-of-principle OPICs. This article validates the reason for using organic crystals as alternate non-silicon materials for OPIC fabrication. It also guides the readers by introducing several crystal-based photonic modules and OPIC prototypes, their passive and active light transduction potentials, and the possibility of implementing well-known photo-physical concepts viz. optical energy transfer and reabsorbance mechanisms. There is also an urgent need to develop a suitable technique for creating geometrically and dimensionally well-defined organic crystals displaying photonic attributes. Finally, the goal should be to build a library of selected optical crystals to facilitate the construction of OPICs with a pick-and-place approach.

The bending behavior of an L-phenylalanine monohydrate soft crystal via reversible hydrogen bond rupture and remodeling

The present study reports a novel L-phenylalanine monohydrate (L-Phe·H₂O) soft crystal, which has the potential to be developed as a medical microdevice owing to its flexibility and biosafety. Structure analysis indicated that there were plenty of directional hydrogen bonds distributed along almost every direction of the L-Phe·H₂O crystal, which appeared to be a rigid and brittle crystal. However, the L-Phe·H₂O crystal could be easily bent heavily and repeatedly. The aim of this study was to systematically investigate the bending mechanism of the L-Phe·H₂O soft crystal from the viewpoint of hydrogen bond variations. In situ micro-Raman and in situ micro-infrared spectra showed that the hydrogen bonds ruptured and rearranged during the bending process. According to the micro-X-ray diffraction results, the order of the L-Phe·H₂O lattice decreased in the bending region, and the varied lattice could return to its original state after straightening. Additionally, energy calculations suggested that the non-directional Coulomb attraction was the major force maintaining the macroscopic crystal integrity of L-Phe·H₂O when it was bent.

Evaluating structure-property relationship in a new family of mechanically flexible co-crystals

A structure-property analysis of ten compositionally and chemically similar co-crystals of N-(pyridin-2-yl)alkylamides and carboxylic acids show that three co-crystals of targets bearing a methyl chain were brittle, while the remaining...

Mechanical twinning in organic crystals

Various kinds of organic crystals can deform beyond their elastic limit, show unique mechanical properties, and switch directions of anisotropic functions by mechanical twinning based on stress-induced molecular movements.

Flexible organic crystals. Understanding the tractable co-existence of elastic and plastic bending

As an emerging class of flexible materials, mechanically bendable molecular crystals are broadly classified as elastic or plastic. Nevertheless, flexible organic crystals with mutually exclusive elastic and plastic traits, with contrasting structural requirements, co-existing under different stress settings are exceptional; hence, it is imperative to establish the concurring factors that beget this rare occurrence. We report a series of halogen-substituted benzil crystals showing elastic bending (within ∼2.45% strain), followed by elastoplastic deformation under ambient conditions. Under higher stress settings, they display exceptional plastic flexibility that one could bend, twist, or even coil around a capillary tube. X-ray diffraction, microscopy, and computational data reveal the microscopic and macroscopic basis for the exciting co-existence of elastic, elastoplastic, and plastic properties in the crystals. The layered molecular arrangement and the weak dispersive interactions sustaining the interlayer region provide considerable tolerance towards breaking and making upon engaging or releasing the external stress; it enables restoring the original state within the elastic strain. Comparative studies with oxalate compounds, wherein the twisted diketo moiety in benzil was replaced with a rigid and coplanar central oxalate moiety, enabled us to understand the effect of the anisotropy factor on the crystal packing induced by the C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O⋯C tetral interactions. The enhanced anisotropy depreciated the elastic domain, making the oxalate crystals more prone to plastic deformation. Three-point bending experiments and the determined Young's moduli further corroborate the co-existence of the elastic and plastic realm and highlight the critical role of the underlying structural elements that determine the elastic to plastic transformation. The work highlights the possible co-existence of orthogonal mechanical characteristics in molecular crystals and further construed the concurrent role of microscopic and macroscopic elements in attaining this exceptional mechanical trait.

Structural and mechanical studies of benzil and oxalate crystals highlight the microscopic and macroscopic basis for the co-existence of orthogonal mechanical traits and the elastic to plastic transformation under different stress settings.

Differences in thermal expansion and motion ability for herringbone and face-to-face π-stacked solids

A series of aromatic organic molecules functionalized with different halogen atoms (I/ Br), motion-capable groups (olefin, azo or imine) and molecular length were designed and synthesized. The molecules self-assemble in the solid state through halogen bonding and exhibit molecular packing sustained by either herringbone or face-to-face π-stacking, two common motifs in organic semiconductor molecules. Interestingly, dynamic pedal motion is only achieved in solids with herringbone packing. On average, solids with herringbone packing exhibit larger thermal expansion within the halogen-bonded sheets due to motion occurrence and molecular twisting, whereas molecules with face-to-face π-stacking do not undergo motion or twisting. Thermal expansion along the π-stacked direction is surprisingly similar, but slightly larger for the face-to-face π-stacked solids due to larger changes in π-stacking distances with temperature changes. The results speak to the importance of crystal packing and intermolecular interaction strength when designing aromatic-based solids for organic electronics applications.

Temperature-Reliant Dynamic Properties and Elasto-Plastic to Plastic Crystal (Rotator) Phase Transition in a Metal Oxyacid Salt

Although, dynamic crystals are attractive for use in many technologies, molecular level mechanisms of various solid-state dynamic processes and their interdependence, remain poorly understood. Here, we report a rare example of a dynamic crystal (1), involving a heavy transition metal, rhenium, with an initial two-face elasticity (within ≈1 % strain), followed by elasto-plastic deformation, at room temperature. Further, these crystals transform to a rotator (plastic) crystal phase at ≈105 °C, displaying exceptional malleability. Qualitative and quantitative mechanical tests, X-ray diffraction, μ-Raman and polarized light microscopy experiments reveal that the elasto-plastic deformation involves both partial molecular rotations and slip, while malleability in the rotator phase is facilitated by reorientational motions and increased symmetry (slip planes). Our work, connecting the plastically bendable (1D or 2D) crystals with the rotator phases (3D), is important for designing multi-functional dynamic crystals.

Global Analysis of the Mechanical Properties of Organic Crystals

Organic crystals, although widely studied, have not been considered nascent candidate materials in the engineering design. Here we summarize the reported mechanical properties of organic crystals reported over the past three decades, and we establish a global mechanical property profile that can be used to predict and identify mechanically robust organic crystals. Being composed of light elements, organic crystals populate a narrow region in the mechanical property-density space between soft, disordered organic materials and stiff, ordered materials. Two subsets of extraordinarily stiff and hard organic crystalline materials were identified and rationalized by the normalized number density, strength and directionality of their intermolecular interactions. We conclude that the future light-weight, soft, all-organic components in devices should capitalize on the combination of long-range structural order and softness as the greatest asset of organic single crystals.

Elastic Flexibility in an Optically Active Naphthalidenimine-Based Single Crystal

Organic single crystals that combine mechanical flexibility and optical properties are important for developing flexible optical devices, but examples of such crystals remain scarce. Both mechanical flexibility and optical activity depend on the underlying crystal packing and the nature of the intermolecular interactions present in the solid state. Hence, both properties can be expected to be tunable by small chemical modifications to the organic molecule. By incorporating a chlorine atom, a reportedly mechanically flexible crystal of (E)-1-(4-bromo-phenyl)iminomethyl-2-hydroxyl-naphthalene (BPIN) produces (E)-1-(4-bromo-2-chloro-phenyl)iminomethyl-2-hydroxyl-naphthalene (BCPIN). BCPIN crystals show elastic bending similar to BPIN upon mechanical stress, but exhibit a remarkable difference in their optical properties as a result of the chemical modification to the backbone of the organic molecule. This work thus demonstrates that the optical properties and mechanical flexibility of molecular materials can, in principle, be tuned independently.

Quantifying Mechanical Properties of Molecular Crystals: A Critical Overview of Experimental Elastic Tensors

This review presents a critical and comprehensive overview of current experimental measurements of complete elastic constant tensors for molecular crystals. For a large fraction of these molecular crystals, detailed comparisons are made with elastic tensors obtained using the corrected small basis set Hartree-Fock method S-HF-3c, and these are shown to be competitive with many of those obtained from more sophisticated density functional theory plus dispersion (DFT-D) approaches. These detailed comparisons between S-HF-3c, experimental and DFT-D computed tensors make use of a novel rotation-invariant spherical harmonic description of the Young's modulus, and identify outliers among sets of independent experimental results. The result is a curated database of experimental elastic tensors for molecular crystals, which we hope will stimulate more extensive use of elastic tensor information-experimental and computational-in studies aimed at correlating mechanical properties of molecular crystals with their underlying crystal structure.

Elastic Properties of High-Symmetry Sb4O6 Cage-Molecular Crystal

The cubic-phase antimony trioxide (α-Sb₂O₃) is a room-temperature stable molecular crystal, composed of cage-like tetraantimony hexoxide (Sb₄O₆) molecules. Despite its versatile functionality, the van der Waals (vdW) bond-dominated nanomechanics is still unclear. Here, the bending plate-like linear behaviors of high-quality α-Sb₂O₃ nanoflakes were observed using the nanoindentation method. It is found that the cage-molecular crystal owns a very low in-plane Young's modulus of 14.9 ± 0.8 GPa and a remarkable maximum tensile strain of 6.0-8.8%, corresponding to a rupture strength of 0.89-1.31 GPa. Elucidated by the atomistic simulations, the compliant elastic modulus and the unexpectedly strong rupture strain are associated with the high-symmetry vdW bonding structure. The vdW nanomechanics is of fundamental and technological relevance to nanoelectronics.

Distinct pathways of solid-to-solid phase transitions induced by defects: the case of dl-me-thio-nine

Understanding of solid-to-solid phase transition mechanisms in polymorphic systems is of critical importance for rigorous control over polymorph purity in the pharmaceutical industry to achieve the desired bioavailability and efficacy of drugs. Ubiquitous defects in crystals may play an important role in the pathways of phase transitions. However, such effects remain poorly understood. Here, the effects of crystal defects on the solid-to-solid phase transformations between dl-me-thio-nine polymorphs α and β are investigated by means of experimental and computational approaches. Thermal analyses of polycrystalline powders show two endothermic peaks in the α-to-β phase transition (and two exothermic peaks for the reverse transition), in contrast with one thermal event observed for single crystals. Variable-temperature 1D and 2D Raman spectra, as well as powder X-ray diffraction patterns, reveal the appearance of two peaks that can attributed to a two-step phase transition, and the extent of the second-step phase transition increases with milling time (or defect density). Quantification of transition kinetics unveils a remarkably higher energy barrier in the second-step phase transition than in the first, proceeding by the cooperative molecular motion pathway. The good linear fitting on the kinetic data by the Jeziorny model suggests that the second-step transition follows the nucleation and growth mechanism. Molecular dynamics simulations were also conducted to understand the role of crystal defects in the solid-state phase transition by tracking the atomic distribution and hydrogen bond lifetime during the transition. It was found that the increasing defect density hinders the propagation of cooperative molecular motion, leading to a combined transition mechanism involving both cooperative motion and nucleation and growth. This study highlights the significant impact of crystal defects on solid-state phase transitions, and the two-step transition mechanism postulated may be universal given the ubiquitous presence of defects in crystalline materials.

Tuning the mechanical flexibility of organic molecular crystals by polymorphism for flexible optical waveguides

The ability to selectively tune the optical and the mechanical properties of organic molecular crystals offers a promising approach towards developing flexible optical devices.

A ferroelastic molecular rotor crystal showing inverse temperature symmetry breaking

A molecular rotor crystal shows a ferroelastic phase transition with unique inverse temperature symmetry breaking which is a result of concerted molecular movement triggered by anisotropic steric repulsion among adjacent molecules.

Coupling of mechanical deformation and reaction in mechanochemical transformations

Co-deformation and forced mixing contribute to the rate of chemical reaction between molecular solids subjected to mechanical processing.

Exploring the diversity of elastic responses of crystalline cadmium(ii) coordination polymers: from elastic towards plastic and brittle responses

Noticeable differences in mechanically induced elastic responses were observed for isostructural crystalline coordination polymers, and their mechanical properties were examined through a highly integrated approach, using both theory and experiment.

Potential and challenges of engineering mechanically flexible molecular crystals

Crystal adaptronics has undergone tremendous developments that have been utilized to rationalize dynamics in crystals. This highlight discusses about the role of intermolecular interactions in rationalizing mechanical responses in crystals.

Determining the mechanisms of deformation in flexible crystals using micro-focus X-ray diffraction

A newly developed methodology allows for the determination of the mechanisms of deformation in flexible crystals with atomic precision. With broader applications, mapping experiments have wide reaching potential within the field of materials science.

Impact of polymorphism on mechanical properties of molecular crystals: a study of p-amino and p-nitro benzoic acid with nanoindentation

We report on nanoindentation data for two pairs of polymorphic compounds of p-aminobenzoic acid (pABA) and p-nitrobenzoic acid (pNBA) and compare it with existing data in the literature. We also explore on a new parameter, s-PBC, as a tool to estimate hardness.

Separation of a diastereomeric diol pair using the mechanical properties of crystals

The visually indistinguishable acicular crystals of a (2S,3R/S)-3-ethyl-1-phenylhex-5-ene-2,3-diol (ephd) diastereomeric pair are separated via the mechanical response based on elastic (2S,3R, right) and brittle (2S,3S, left) crystals.

Martensitic transition in molecular crystals for dynamic functional materials

Molecular martensitic materials are an emerging class of smart materials with enormous tunability in physicochemical properties, attributed to the tailored molecular and crystal structures through molecular design. This class of materials exhibits ultrafast and reversible structural transitions in response to thermal and mechanical stimuli, which underlies fascinating properties such as thermoelasticity, superelasticity, ferroelasticity, and shape memory effect. These dynamic properties are not widely explored in molecular crystals and therefore molecular martensitic materials represent a new frontier in the field of solid-state chemistry. In martensitic transitions, the materials not only exhibit substantial shape changes but also remember the functions in the associated polymorphic phases. This suggests promising applicability towards light-weight actuators, lifts, dampers, sensors, shape-/function-memory and ultraflexible optoelectronic devices. In this article, we review characteristics, detailed transition mechanisms, and potential applications of molecular martensitic materials. In particular, we aim to describe transition characteristics by collecting cases with similar transition principles in order to glean insights into further advancement of molecular martensitic materials. Overall, we believe that molecular martensitic materials are emerging as the next generation smart materials that have shown promise in advancing a wide range of domains of applications.

Harnessing molecular rotations in plastic crystals: a holistic view for crystal engineering of adaptive soft materials

Plastic crystals (PCs), formed by certain types of molecules or ions with reorientational freedom, offer both exceptional mechanical plasticity and long range order, hence they are attractive for many mechano-adaptable technologies. While most classic PCs belong to simple globular molecular systems, a vast number of examples in the literature with diverse geometrical (cylindrical, bent, disk, etc.) and chemical (neutral, ionic, etc.) natures have proven their wide scope and opportunities. All the recent reviews on PCs aim to provide insights into a particular application, for instance, organic plastic crystal electrolytes or ferroelectrics. This tutorial review presents a holistic view of PCs by unifying the recent excellent progress in fundamental concepts from diverse areas as well as comparing them with liquid crystals, amphidynamic crystals, ordered crystals, etc. We cover the molecular and structural origins of the unique characteristics of PCs, such as exceptional plasticity, facile reversible switching of order-to-disorder states and associated colossal heat changes, and diffusion of ions/molecules, and their attractive applications in solid electrolytes, opto-electronics, ferroeletrics, piezoelectrics, pyroelectrics, barocalorics, magnetics, nonlinear optics, and so on. The recent progress not only demonstrates the diversity of scientific areas in which PCs are gaining attention but also the opportunities one can exploit using a crystal engineering approach, for example, the design of novel dynamic functional soft materials for future use in flexible devices or soft-robotic machines.

Enabling Control over Mechanical Conformity and Luminescence in Molecular Crystals: Interaction Engineering in Action

Molecular crystals of π-conjugated molecules are of great interest as the highly ordered dense packing offers superior charge and exciton transport compared with its amorphous counterparts. However, integration into optoelectronic devices remains a major challenge owing to its inherently brittle nature. Herein, control over the mechanical conformity in single crystals of pyridine-appended thiazolothiazole derivatives is reported by modulating the molecular packing through interaction engineering. Two polymorphs were prepared by achieving control over the thermodynamic/kinetic factors of crystallization; one of the polymorphs exhibits elastic bending whereas the other is brittle. The control over the bending ability was achieved by forming co-crystals with hydrogen/halogen bond donors. A seamless extended crisscross pattern with respect to the bend plane through a ditopic hydrogen-bonding motif showed the highest compliance towards mechanical bending, whereas the co-crystals with a layered crisscross arrangement with segregated layers of co-formers exhibit slightly lower bending conformity. These results update the rationale behind the plastic/elastic bending in molecular crystals. The co-crystals of ditopic halogen bond co-assemblies are particularly appealing for waveguiding applications as the co-crystals blend high mechanical flexibility and luminescence properties. The hydrogen bonded co-crystals are non-emissive in nature owing to excited state proton transfer dynamics. The rationale behind the fluorescence properties of these materials was also established from DFT calculations in a quantum mechanics/molecular mechanics (QM/MM) framework.

Exceptionally Plastic/Elastic Organic Crystals of a Naphthalidenimine-Boron Complex Show Flexible Optical Waveguide Properties

The design of molecular compounds that exhibit flexibility is an emerging area of research. Although a fair amount of success has been achieved in the design of plastic or elastic crystals, realizing multidimensional plastic and elastic bending remains challenging. We report herein a naphthalidenimine-boron complex that showed size-dependent dual mechanical bending behavior whereas its parent Schiff base was brittle. Detailed crystallographic and spectroscopic analysis revealed the importance of boron in imparting the interesting mechanical properties. Furthermore, the luminescence of the molecule was turned-on subsequent to boron complexation, thereby allowing it to be explored for multimode optical waveguide applications. Our in-depth study of the size-dependent plastic and elastic bending of the crystals thus provides important insights in molecular engineering and could act as a platform for the development of future smart flexible materials for optoelectronic applications.

Nanoindentation of Molecular Crystals: Lessons Learned from Aspirin

Nanoindentation enables the measurement of mechanical properties from single crystals with dimensions of a few micrometers. This experimental technique, however, has only recently been applied to molecular crystals. Key differences between the application of this technique to molecular crystals and metals and other inorganics are identified. From this, protocols for the measurement of hardness and elastic modulus of molecular crystals of pharmaceutical interest are proposed. Using form I aspirin as a model system, the impact of single crystal sample surface preparation (washing and cleaving) on the surface roughness is explored. We show the importance of using a calibration sample with hardness and stiffness close to that of molecular crystals for the acquisition of more accurate data. The issue of solvent occlusions formed during crystal growth is discussed as a source of material property variation as well as tip contamination. It is proposed that this in part explains the significantly larger variation of the measured mechanical properties among different single crystals compared to those performed on a unique sample. Because both the indentation modulus and the hardness can vary significantly for low depth indents, samples were tested over a wide range of depths, which revealed that a minimum depth of penetration is required for the acquisition of data. This experiment is crucial and needs to be carried out for every system under study since it allows for the determination of the minimum-working load. Post-indentation imaging combined with crystallographic analysis and molecular simulations allows for the characterization and rationalization of the material plastic deformation mechanisms.