Resonance Light-Scattering Correlation Spectroscopy and Its Application in Analytical Chemistry for Life Science

Resonance light-scattering correlation spectroscopy (RLSCS) is a new single-particle detection method with its working principle being like fluorescence correlation spectroscopy (FCS). RLSCS is obtained by autocorrelation function analysis on the measured fluctuation of the resonance light scattering (RLS) intensity occurring within a subfemtoliter volume when a single nanoparticle (such as gold nanoparticles (NPs) or silver (SNPs)) freely diffuses through the volume. The RLSCS technique can detect such parameters as concentration, diffusion coefficient (translation and rotation), etc. Compared with the FCS technique, the correlated fluorescence intensity signal in RLSCS is replaced with the RLS signal of the nanoparticles, overcoming some limits of the fluorescent probes such as photobleaching under high-intensity or long-term illumination. In this Account, we showcase RLSCS methods, theoretical models at different optical configurations, and some key applications. First, the RLSCS optical detection system was constructed based on the confocal optics, its theoretical model was proposed, and the diffusion behaviors of the nanoparticles in the solution were studied including the rotational and translational diffusion. And, methods were developed to measure the concentration, size, aspect ratio, and size distribution of the NPs. Second, based on the RLSCS methods, some detection strategies were developed for homogeneous DNA detection, immunoassay, apoptosis assay, self-thermophoresis of the nanomotor, and quantitative assay in single living cells. Meanwhile, a new fluorescence/scattering cross-correlation spectroscopy (FSCCS) method was proposed for monitoring the molecule-particle interaction. This method enriched the conventional fluorescence/fluorescence cross-correlation spectroscopy (FCCS) method. Third, using the EMCCD with high sensitivity and rapid response as an optical detector, two temporospatially resolved scattering correlation spectroscopy methods and their theoretical models were developed: total internal reflection (TIR) configuration-based spatially resolved scattering correlation spectroscopy (SRSCS) and dark-field illumination-based scattering correlation spectroscopy (DFSCS). These methods extended single-spot confocal RLSCS to imaging RLSCS, which makes RLSCS have the ability for multiple channel detection with temporospatial resolution. The method was successfully used for investigating the dynamic behaviors of gold NPs in live cells and obtained its temporospatial concentration distribution and diffusion behaviors. The final section of this Account outlines future directions in the development of RLSCS.

Numerical Simulation of a Scanning Illumination System for Deep Tissue Fluorescence Imaging

The spatial resolution and light detected in fluorescence imaging for small animals are limited by light scattering, absorption and autofluorescence. To address this, novel near-infrared fluorescent contrast agents and imaging configurations have been investigated. In this paper, the influence of the light wavelength and imaging configurations (full-field illumination system and scanning system) on fluorescence imaging are compared quantitatively. The surface radiance for both systems is calculated by modifying the simulation tool Near-Infrared Fluorescence and Spectral Tomography. Fluorescent targets are embedded within a scattering medium at different positions. The surface radiance and spatial resolution are obtained for emission wavelengths between 620 nm and 1000 nm. It was found that the spatial resolution of the scanning system is independent of the tissue optical properties, whereas for full-field illumination, the spatial resolution degrades at longer wavelength. The full width at half maximum obtained by the scanning system is 25% lower than that obtained by the full-field illumination system when the targets are located in the middle of the phantom. The results indicate that although imaging at near-infrared wavelength can achieve a higher surface radiance, it may produce worse spatial resolution.

Size-Dependent Band-Gap and Molar Absorption Coefficients of Colloidal CuInS2 Quantum Dots

The knowledge of the quantum dot (QD) concentration in a colloidal suspension and the quantitative understanding of the size-dependence of the band gap of QDs are of crucial importance from both applied and fundamental viewpoints. In this work, we investigate the size-dependence of the optical properties of nearly spherical wurtzite (wz) CuInS₂ (CIS) QDs in the 2.7 to 6.1 nm diameter range (polydispersity ≤10%). The QDs are synthesized by partial Cu⁺ for In³⁺ cation exchange in template Cu_{2- x}S nanocrystals, which yields CIS QDs with very small composition variations (In/Cu = 0.91 ± 0.11), regardless of their sizes. These well-defined QDs are used to investigate the size-dependence of the band gap of wz CIS QDs. A sizing curve is also constructed for chalcopyrite CIS QDs by collecting and reanalyzing literature data. We observe that both sizing curves follow primarily a 1/ d dependence. Moreover, the molar absorption coefficients and the absorption cross-section per CIS formula unit, both at 3.1 eV and at the band gap, are analyzed. The results demonstrate that the molar absorption coefficients of CIS QDs follow a power law at the first exciton transition energy (ε _E1 = 5208 d^2.45) and scale with the QD volume at 3.1 eV. This latter observation implies that the absorption cross-section per unit cell at 3.1 eV is size-independent and therefore can be estimated from bulk optical constants. These results also demonstrate that the molar absorption coefficients at 3.1 eV are more reliable for analytical purposes, since they are less sensitive to size and shape dispersion.

Rapid and Quantitative Measurement of Single Quantum Dots in a Sheath Flow Cuvette

Semiconducting quantum dots (QDs) are finding a wide range of biomedical applications due to their intense fluorescence brightness and long-term photostability. Here, we report precise quantification of the fluorescence intensity of single QDs on a laboratory-built high-sensitivity flow cytometer (HSFCM). The nearly uniform illumination of the particles at the intense portions of the radiation field resulted in narrowly distributed signals with high signal-to-noise ratios. By analysis of thousands of QDs individually in as little time as 1 min, intrinsic polydispersity was quickly revealed in a statistically robust manner. Applications of this technique in QD quality assessment, study of metal ion influence, and evaluation of aggregation upon biomolecule coupling are presented. Moreover, an accurate measurement of the QD particle concentration was achieved via single-particle enumeration. HSFCM is believed to provide a powerful characterization tool for QD synthesis and application development.

Size-dependent optical properties of conjugated polymer nanoparticles

The systematic understanding of size-dependent optical properties of conjugated polymer nanoparticles is rather significant to the selecting of labelling materials.

An aptamer-based single particle method for sensitive detection of thrombin using fluorescent quantum dots as labeling probes

In this study, an aptamer-based single particle method was developed for the thrombin detection in human serum samples using fluorescence correlation spectroscopy (FCS). In this method, quantum dots (QDs) were used as the fluorescent probes and thrombin-binding aptamer (TBA) was used as molecular recognition unit. When two QDs probes labeled with TBA (QD-TBA1 and QD-TBA2) are mixed in a sample containing thrombin targets, the binding of targets will cause QDs to form dimers (or oligomers) with bigger sizes, which leads to the nearly double increase in the characteristic diffusion time of QDs in the detection volume of FCS. FCS method can detect the change in the characteristic diffusion time of QDs. Firstly, the diffusion and blinking behaviors of QD-TBA probes in the presence of thrombin were investigated by FCS and total internal reflection fluorescence microscopy (TIRFM) imaging system, and the experimental results documented that QD-TBAs were bound together with "one-by-one" structure when thrombin were added into the solution. And then, the assay conditions were optimized in order to improve the sensitivity and specificity of this method. Under the optimized conditions, the linear range of the method is from 5.0 nM to 500 nM of thrombin, and the limit of detection is about 2.6 nM. Finally, this method was applied to homogeneous determination of thrombin in human serum samples.

Assessing the blinking state of fluorescent quantum dots in free solution by combining fluorescence correlation spectroscopy with ensemble spectroscopic methods

The current method for investigating the blinking behavior is to immobilize quantum dots (QDs) in the matrix and then apply a fluorescent technique to monitor the fluorescent trajectories of individual QDs. So far, no method can be used to directly assess the blinking state of ensemble QDs in free solution. In this study, a new method was described to characterize the blinking state of the QDs in free solution by combining single molecule fluorescence correlation spectroscopy (FCS) with ensemble spectroscopic methods. Its principle is based on the observation that the apparent concentration of bright QDs obtained by FCS is less than its actual concentration measured by ensemble spectroscopic method due to the QDs blinking. We proposed a blinking index (Kblink) for characterizing the blinking state of QDs, and Kblink is defined as the ratio of the actual concentration (Cb,actual) measured by the ensemble spectroscopic method to the apparent concentration (Cb,app) of QDs obtained by FCS. The effects of certain factors such as laser intensity, growth process, and ligands on blinking of QDs were investigated. The Kblink data of QDs obtained were successfully used to characterize the blinking state of QDs and explain certain experimental results.

Are bidentate ligands really better than monodentate ligands for nanoparticles?

Coordinating ligands are widely used to vary the solubility and reactivity of nanoparticles for subsequent bioconjugation. Although long-term colloidal stability is enhanced by using bidentate coordinating ligands over monodentate ones, other properties such as nonspecific adsorption of target molecules and ligand exchange have not been quantified. In this study, we modified a near-infrared dye to serve as a highly sensitive reporter for nonspecific binding of thiolated target molecules to nanoparticle surfaces that are functionalized with monodentate or bidentate coordinated ligands. Specifically, we analyzed nonspecific binding mechanisms to quantum dots (QDs) by fitting the adsorption profiles to the Hill equation and the parameters are used to provide a microscopic picture of how ligand density and lability control nonspecific adsorption. Surprisingly, bidentate ligands are worse at inhibiting adsorption to QD surfaces at low target/QD ratios, although they become better as the ratio increases, but only if the nanoparticle surface area is large enough to overcome steric effects. This result highlights that a balance between ligand density and lability depends on the dentate nature of the ligands and controls how molecules in solution can coordinate to the nanoparticle surface. These results will have major implications for a range of applications in nanobiomedicine, bioconjugation, single molecule spectroscopy, self-assembly, and nano(photo)catalysis where both nonspecific and specific surface interactions play important roles. As an example, we tested the ability of monodentate and bidentate functionalized nanoparticles to resist nonspecific adsorption of IgG antibodies that contained free thiol groups at a 1:1 QD/IgG ratio and found that QDs with monodentate ligands did indeed result in lower nonspecific adsorption.

Quantum dots in bioanalysis: a review of applications across various platforms for fluorescence spectroscopy and imaging

Semiconductor quantum dots (QDs) are brightly luminescent nanoparticles that have found numerous applications in bioanalysis and bioimaging. In this review, we highlight recent developments in these areas in the context of specific methods for fluorescence spectroscopy and imaging. Following a primer on the structure, properties, and biofunctionalization of QDs, we describe select examples of how QDs have been used in combination with steady-state or time-resolved spectroscopic techniques to develop a variety of assays, bioprobes, and biosensors that function via changes in QD photoluminescence intensity, polarization, or lifetime. Some special attention is paid to the use of Förster resonance energy transfer-type methods in bioanalysis, including those based on bioluminescence and chemiluminescence. Direct chemiluminescence, electrochemiluminescence, and charge transfer quenching are similarly discussed. We further describe the combination of QDs and flow cytometry, including traditional cellular analyses and spectrally encoded barcode-based assay technologies, before turning our attention to enhanced fluorescence techniques based on photonic crystals or plasmon coupling. Finally, we survey the use of QDs across different platforms for biological fluorescence imaging, including epifluorescence, confocal, and two-photon excitation microscopy; single particle tracking and fluorescence correlation spectroscopy; super-resolution imaging; near-field scanning optical microscopy; and fluorescence lifetime imaging microscopy. In each of the above-mentioned platforms, QDs provide the brightness needed for highly sensitive detection, the photostability needed for tracking dynamic processes, or the multiplexing capacity needed to elucidate complex systems. There is a clear synergy between advances in QD materials and spectroscopy and imaging techniques, as both must be applied in concert to achieve their full potential.

Hydrodynamic size-dependent cellular uptake of aqueous QDs probed by fluorescence correlation spectroscopy

Aqueous quantum dots (QDs) directly synthesized with various thiol ligands have been investigated as imaging probes in living cells. However, the effect of the surface chemistry of these ligands on QDs' cellular uptakes and their intracellular fate remains poorly understood. In this work, four CdTe QDs were directly synthesized under aqueous conditions using four different thiols as stabilizers and their interactions with cells were investigated. Fluorescence correlation spectroscopy (FCS), X-ray photoelectron spectroscopy (XPS), and zeta potential measurements on QDs primarily show that the surface structure of these QDs is highly dependent on the thiol ligands used in the preparation of QDs' precursors, including its layer thicknesses, densities, and surface charges. Subsequently, FCS integrated with the maximum-entropy-method-based FCS (MEMFCS) was used to investigate the concentration distribution and dynamics of these QDs in living A-427 cells. Our findings indicate that QDs' surface characteristics affect cell membrane adsorption and subsequent internalization. More critically, we show that the cellular uptake of aqueous QDs is dependent on their hydrodynamic diameter and might have the potential to escape trapped environments to accumulate in the cytoplasm.