Chemical redox-regulated mesoporous silica-coated gold nanorods for colorimetric probing of Hg2+ and S2-

Structurally engineered ion-receptor probe immobilized porous polymer platform as reusable solid-state chromogenic sensor for the ultra-trace sensing and recovery of mercury ions

This study reports an efficacious solid-state optical sensor through the synergistic coalescences of an original chromoionophoric probe and a structurally engineered porous polymer monolith for the selective and sensitive colorimetric spotting of ultra-trace toxic mercury ions. The unique properties of the bimodal macro-/meso-pore structured polymer, i.e., poly(AAm-co-EGDMA) monolith, offer voluminous and uniform anchoring of probe molecules, i.e., (Z)-N-phenyl-2-(quinoline-4-yl-methylene)hydrazine-1-carbothioamide (PQMHC). The structure/surface features of the sensory system, i.e., surface area, pore dimensions, monolith framework, elemental mapping, and phase composition, were examined by p-XRD, XPS, FT-IR, HR-TEM-SAED, FE-SEM-EDAX, and BET/BJH analysis. The sensor's ion-capturing ability was established through naked eye color transition and UV-Vis-DRS response. The sensor exhibits a strong binding affinity for Hg²⁺, with a linear signal response in the concentration range of 0-200 μg/L (r² >0.999), with a detection limit of 0.33 μg/L. The analytical parameters were optimized to facilitate pH-dependent visual sensing of ultra-trace Hg²⁺ in ≤ 30 s. The sensor exhibits high chemical/physical stability characteristics, with reliable data reproducibility (RSD ≤1.94 %), while testing with natural/synthetic water and cigarette samples. The proposed work offers a cost-effective and reusable naked-eye sensory system for the selective sensing of ultra-trace Hg²⁺, with potential prospects of commercialization considering their simplicity, viability, and reliability.

Colorimetric detection of heavy metal ions with various chromogenic materials: Strategies and applications

Detection of heavy metal ions has drawn significant attention in environmental and food area due to their threats to the human health and ecosystem. Colorimetry is one of the most frequently-used methods for the detection of heavy metal ions owing to its simplicity, easy operation and rapid on-site detection. The development of chromogenic materials and their sensing mechanisms are the key research direction in the area of colorimetric method. Since each chromogenic material has their unique optical and chemical properties, they have totally different colorimetric sensing mechanisms. This review focuses on the chromogenic materials and their sensing strategies for the colorimetric detection of heavy metal ions. We divide the chromogenic materials into three types, including organic materials, inorganic materials, and other materials. As for each type of chromogenic material, we discuss their detailed sensing strategies, sensing performance, and real sample applications. Moreover, current challenges and perspectives related to the colorimetry of heavy metal ions are also discussed in this review. The aim of this review is to help readers to better understand the principles of colorimetric methods for heavy metal ions and push the development of rapid detection of heavy metal ions.

Amine-Functionalized Silane-Assisted Preparation of AgNP-Deposited α-Ni(OH)2 Composite Materials and Their Application in Hg2+ Ion Sensing

A facile synthetic methodology for the deposition of different concentrations of Ag nanoparticles (AgNPs) on α-Ni(OH)₂ sheets (α-Ni₁(OH)₂-Ag_0.5, α-Ni₁(OH)₂-Ag₁, α-Ni₁(OH)₂-Ag₂, and α-Ni₁(OH)₂-Ag₃) is reported using N-[3-(trimethoxysilyl)propyl]diethylenetriamine (TPDT) silane. The TPDT aminosilane facilitates the formation of α-Ni(OH)₂ sheets and reduces the Ag⁺ precursor to AgNPs, leading to the deposition of AgNPs on α-Ni(OH)₂ sheets. UV-vis absorption spectroscopy, transmission microscopy analyses, X-ray photoelectron spectroscopy, X-ray diffraction, and attenuated total reflectance-Fourier transform infrared spectroscopy techniques were used to characterize the prepared α-Ni₁(OH)₂-Ag_0.5-3 composite materials. High-angle annular dark-field scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy mapping images and scanning electron microscopy-energy-dispersive X-ray spectroscopy mapping images were recorded to understand the α-Ni₁(OH)₂-Ag composite sheet materials. The optical sensing property of α-Ni₁(OH)₂-Ag_0.5-3 composite materials toward toxic Hg²⁺ ions were investigated using a UV-vis absorption spectroscopy technique. The α-Ni₁(OH)₂-Ag₂ composite material showed selective sensing behavior.

Capability of Au nano-rhombic dodecahedra in a label-free colorimetric assay: application in the determination of S2− and Hg2+

Au nano-rhombic dodecahedra  with high sensitivity to the environmental refractive index afford sensitive detection of S2- and Hg2+.

Interfacing DNA with Gold Nanoparticles for Heavy Metal Detection

The contamination of heavy metals (e.g., Hg, Pb, Cd and As) poses great risks to the environment and human health. Rapid and simple detection of heavy metals of considerable toxicity in low concentration levels is an important task in biological and environmental analysis. Among the many convenient detection methods for heavy metals, DNA-inspired gold nanoparticles (DNA-AuNPs) have become a well-established approach, in which assembly/disassembly of AuNPs is used for colorimetric signaling of the recognition event between DNA and target heavy metals at the AuNP interface. This review focuses on the recent efforts of employing DNA to manipulate the interfacial properties of AuNPs, as well as the major advances in the colorimetric detection of heavy metals. Beginning with the introduction of the fundamental aspects of DNA and AuNPs, three main strategies of constructing DNA-AuNPs with DNA binding-responsive interface are discussed, namely, crosslinking, electrostatic interaction and base pair stacking. Then, recent achievements in colorimetric biosensing of heavy metals based on manipulation of the interface of DNA-AuNPs are surveyed and compared. Finally, perspectives on challenges and opportunities for future research in this field are provided.

Colorimetric determination of mercury(II) ion based on DNA-assisted amalgamation: a comparison study on gold, silver and Ag@Au Nanoplates

Inspired by the increasing use of plasmonic gold and silver nanoplates as probes for diverse analytes, the research community often questions which metal nanoplates should be chosen for a given application. A comparative study was performed on the performance and physicochemical properties of three types of metal nanoplates for use in plasmonic detection of Hg(II) ion. Specifically, gold, silver and Ag@Au nanoplates were studied. The established amalgamation method integrated into a detection scheme using nanoplates affords a unique yet straightforward signaling and extraction route for selective recognition of Hg(II) ion. Upon transformation of Hg(II) ion to metallic mercury, nanoplate amalgamation takes place instantly. This reshapes both the morphology and the optical characteristics of nanoplates. It is found that gold and Ag@Au nanoplates enable highly selective quantitation of Hg(II) ion by using a DNA oligomer consisting of poly-deoxycytidine (poly(C)) as a masking agent against Ag(I) ion. The silver nanoplates, in turn, display the best sensitivity owing to the chemical instability. The induced surface plasmonic shifts (of up to 250 nm and color changes from red to green) allows for determination of Hg(II) over a wide range and with a limit of detection of ~10 nM. It is recommended that the gold and Ag@Au nanoplates are used in relatively complex systems, while silver nanoplates are suited for simple matrices. Graphic abstract The amalgamation process integrated with metal (e.g., Au, Ag and Ag@Au) nanoplates affords plasmonic detection of Hg(II) ion with the aid of a poly(c) DNA sequence as the masking agent for Ag(I) ion.

Colorimetric Detection of Sulfide Anions via Redox-Modulated Surface Chemistry and Morphology of Au-Hg Nanorods

A new colorimetric assay for the detection of sulfide anions with high sensitivity and selectivity is reported, utilizing Au-Hg alloy nanorods (Au-HgNRs) as probe. Au-HgNRs were prepared by modifying gold nanorods (AuNRs) with reducing agent and mercury ions. In an aqueous solution with sulfide anions, the formation of mercuric sulfide due to redox reaction between the amalgams and sulfide anions greatly changed the surface chemistry and morphology of the Au-HgNRs, leading to a red shift of the localized surface plasmon resonance (LSPR) absorption peak, accompanied by a change in colorimetric response. A good linear relationship was obtained between the LSPR peak wavelength shift and concentration of sulfide anion in the range of 1 × 10⁻⁵−1 × 10⁻⁴mol/L. The selectivity of this method has been investigated by other anions. The colorimetric sensing system successfully detected sulfide in wastewater from leather industry.

Time-resolved visual detection of heparin by accelerated etching of gold nanorods

Plasmonic gold nanorods are promising and sensitive light scattering probes, which can reach the single particle level. Herein, we present the light scattering properties of gold nanorods for time-resolved visual detection of heparin based on the rapid etching of gold nanorods under dark-field microscopy.

In solution SERS sensing using mesoporous silica-coated gold nanorods

Mesoporous silica-coated gold nanorods (AuNR@MS) act as a colloidally stable Raman sensing platform with a built-in analyte size cutoff. Herein, these core-shell plasmonic nanostructures were presented with a range of thiolated Raman-active molecules to probe the limits of this platform for SERS sensing. The experimental results show generally, that the transport of molecules through the mesopores is highly dependent on the size of the molecule and specifically, that AuNR@MS with pores of ∼4 nm diameter are able to sense analytes with molecular dimensions smaller than 1.5 nm. This sensing platform will likely find broad use, performing well even in complex media based on the high colloidal stability imbued by the mesoporous silica shell.

Robust colorimetric detection based on the anti-aggregation of gold nanoparticles for bromide in rice samples

Inorganic bromide (Br⁻) is an important contaminant ion as it can originate from the overuse of illegal methyl bromide as a fumigant in stored rice samples. Herein, we developed a simple and highly sensitive colorimetric sensor for bromide ion detection in rice samples. The sensor is based on the anti-aggregation of gold nanoparticles (AuNPs) by Br⁻ in the presence of Cr³⁺, which made the method more selective than other typical aggregations of nanoparticles. The AuNPs underwent an aggregation process as a result of the coordination of Cr³⁺ and the carboxylate group of a citrate ion stabilized the AuNPs, resulting in a red-to-blue color change. When Br⁻ was pre-mixed with the AuNPs and Cr³⁺ was added, the solution color changed from blue to red with an increase in the Br⁻ concentration. The anti-aggregation process can be detected with the naked eye and monitored using UV-vis spectrophotometry. The linear calibration curve ranged between 0.31 and 3.75 μM Br⁻ with a low LOD and LOQ of 0.04 and 0.13 μM. The recovery was excellent, ranging from 79.9–92.2% with an RSD of less than 4.0%. The good inter-day and intra-day precisions were 2.9–6.4% and 3.1–7.1%, respectively. The developed sensor has proved to provide a robust method for Br⁻ detection in rice samples.

In this work, we developed a AuNP colorimetric sensor for the facile, sensitive and selective detection of bromide ions in rice samples.

Advances in the development of aptamer drug conjugates for targeted drug delivery

A key goal of modern medicine is target-specific therapeutic intervention. However, most drugs lack selectivity, resulting in 'off-target' side effects. To address the requirements of 'targeted therapy,' aptamers, which are artificial oligonucleotides, have been used as novel targeting ligands to construct aptamer drug conjugates (ApDC) that can specifically bind to a broad spectrum of targets, including diseased cells. Accordingly, the application of aptamers in targeted drug delivery has attracted broad interest due to their impressive selectivity and affinity, low immunogenicity, easy synthesis with high reproducibility, facile modification, and relatively rapid tissue penetration with no toxicity. Functionally, aptamers themselves can be used as macromolecular drugs, and they are also commonly used in biomarker discovery and targeted drug delivery. In this review, we will highlight the most recent advances in the development of aptamers and aptamer conjugates, and discuss their potential in targeted therapy. WIREs Nanomed Nanobiotechnol 2017, 9:e1438. doi: 10.1002/wnan.1438 For further resources related to this article, please visit the WIREs website.

Oxidase-like mimic of Ag@Ag3PO4 microcubes as a smart probe for ultrasensitive and selective Hg(2+) detection

An oxidase-like mimic system based on facilely synthesized Ag@Ag3PO4 microcubes (Ag@Ag3PO4MCs) was designed and utilized to detect mercury ions with high selectivity and ultrasensitivity. Ag@Ag3PO4MCs with an average size of ca. 1.6 μm were synthesized by the reaction of [Ag(NH3)2](+) complex and Na2HPO4 and subsequent photoreduction under ultraviolet light. The as-prepared Ag@Ag3PO4MCs can effectively catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and o-phenylenediamine (OPD) in the presence of dissolved oxygen in slightly acidic solution, exhibiting oxidase-like activities rather than peroxidase-like activity. Interestingly, the introduction of Ag nanoparticles (AgNPs) on the surfaces of Ag3PO4MCs can dramatically enhance the oxidase-like activities due to a synergistic effect between AgNPs and Ag3PO4MCs, as evidenced by the faster oxidation speed of TMB and OPD than that of native Ag3PO4MCs in the presence of dissolved oxygen. The enzyme kinetics can be well-explained by the Michaelis-Menten equation. As "poisoning" inhibitor, Hg(2+) ions can inhibit the enzyme reaction catalyzed by Ag3PO4MCs or Ag@Ag3PO4MCs. On the basis of this effect, a colorimetric Hg(2+) sensor was developed by the enzyme inhibition reaction of Ag3PO4MCs or Ag@Ag3PO4MCs. The excellent specific interaction of Hg-Ag or Hg(2+)-Ag(+) provides high selectivity for Hg(2+) over interfering metal ions. Meanwhile, the sensitivity of this sensor to Hg(2+) is extremely excellent with a limit of detection as low as 0.253 nM for Ag@Ag3PO4MCs. Considering the advantages of low detection limit, low cost, facile preparation, and visualization, the colorimetric Ag@Ag3PO4MCs sensor shows high promise for the testing of Hg(2+) in water samples.

One-pot preparation of graphene–Ag nano composite for selective and environmentally-friendly recognition of trace mercury(ii)

A graphene–silver nano composite was prepared by a simple one-pot redox method, using ascorbic acid as a catalytic reagent, which was applied for colorimetric Hg²⁺ detection. The proposed method is selective and sensitive with little secondary pollution.

Gold nanoparticle-based nanosystems for the colorimetric detection of Hg2+ ion contamination in the environment

This review highlights the impact of Hg²⁺ contamination on the human population and the need for its detection.

A gold nanorod-based localized surface plasmon resonance platform for the detection of environmentally toxic metal ions

Gold nanorods (Au NRs) are elongated nanoparticles with unique optical properties which depend on their shape anisometry. The Au NR-based longitudinal localized surface plasmon resonance (longitudinal LSPR) band is very sensitive to the surrounding local environment and upon the addition of target analytes, the interaction between the analytes and the surface of the Au NRs leads to a change in the longitudinal LSPR band. This makes it possible to devise Au NR probes with application potential to the detection of toxic metal ions with an improved limit of detection, response time, and selectivity for the fabrication of sensing devices. The effective surface modification of Au NRs helps in improving their selectivity and sensitivity toward the detection of toxic metal ions. In this review, we discuss different methods for the preparation of surface modified Au NRs for the detection of toxic metal ions based on the LSPR band of the Au NRs and the types of interactions between the surface of Au NRs and metal ions. We summarize the work that has been done on Au NR-based longitudinal LSPR detection of environmentally toxic metal ions, sensing mechanisms, and the current progress in various modified Au NR-based longitudinal LSPR sensors for toxic metal ions. Finally, we discuss the applications of Au NR-based longitudinal LSPR sensors to real sample analysis and some of the future challenges facing longitudinal LSPR-based sensors for the detection of toxic metal ions toward commercial devices.

"Elastic" property of mesoporous silica shell: for dynamic surface enhanced Raman scattering ability monitoring of growing noble metal nanostructures via a simplified spatially confined growth method

The Raman enhancing ability of noble metal nanoparticles (NPs) is an important factor for surface enhanced Raman scattering (SERS) substrate screening, which is generally evaluated by simply mixing as-prepared NPs with Raman reporters for Raman signal measurements. This method usually leads to incredible results because of the NP surface coverage nonuniformity and reporter-induced NP aggregation. Moreover, it cannot realize in situ, continuous SERS characterization. Herein, we proposed a dynamic SERS monitoring strategy for NPs with precisely tuned structures based on a simplified spatially confined NP growth method. Gold nanorod (AuNR) seed NPs were coated with a mesoporous silica (mSiO2) shell. The permeability of mSiO2 for both reactive species and Raman reporters rendered the silver overcoating reaction and SERS indication of NP growth. Additionally, the mSiO2 coating ensured monodisperse NP growth in a Raman reporter-rich reaction system. Moreover, "elastic" features of mSiO2 were observed for the first time, which is crucial for holding the growing NP without breakage. This feature makes the mSiO2 coating adhere to metal NPs throughout the growing process, providing a stable Raman reporter distribution microenvironment near the NPs and ensuring that the substrate's SERS ability comparison is accurate. Three types of NPs, i.e., core-shell Au@AgNR@mSiO2, Au@AuNR@mSiO2, and yolk-shell Au@void@AuNR@mSiO2 NPs, were synthesized via core-shell overgrowth and galvanic replacement methods, showing the versatility of the approach. The living cell SERS labeling ability of Au@AgNR@mSiO2-based tags was also demonstrated. This strategy addresses the problems of multiple batch NP preparation, aggregation, and surface adsorption differentiation, which is a breakthrough for the dynamic comparison of SERS ability of metal NPs with precisely tuned structures and optical properties.

Fluorescent sensing of sulfide ions based on papain-directed gold nanoclusters

This fluorescence sensing system showed excellent performance and could be applied to the determination of S²⁻ in natural water samples.

Carbamodithioate-based dual functional fluorescent probe for Hg(2+) and S(2-)

Carbamodithioate-based compound T1 was designed and synthesized as a dual-functional probe for Hg(2+) ions and S(2-) anions. The underlying signaling mechanism was intramolecular charge transfer (ICT). It could serve as a direct probe towards Hg(2+) ions through "on-off" fluorescence changes and an indirect probe towards S(2-) anions through "on-off-on" fluorescence changes.

An ultrasensitive quantum dots fluorescent polarization immunoassay based on the antibody modified Au nanoparticles amplifying for the detection of adenosine triphosphate

In this work, an ultrasensitive fluorescent polarization immunoassay (FPIA) method based on the quantum dot/aptamer/antibody/gold nanoparticles ensemble has been developed for the detection of adenosine triphosphate (ATP). DNA hybridization is formed when ATP is present in the PBS solution containing the DNA-conjugated quantum dots (QDs) and antibody-AuNPs. The substantial sensitivity improvement of the antibody-AuNPs-enhanced method is mainly attributed to the slower rotation of fluorescent unit when QDs-labeled oligonucleotides hybridize with antibody modified the gold nanoparticle. As a result, the fluorescent polarization (FP) values of the system increase significantly. Under the optimal conditions, a linear response with ATP concentration is ranged from 8×10(-12) M to 2.40×10(-4) M. The detection limit reached as low as 1.8 pM. The developed work provides a sensitive and selective immunoassay protocol for ATP detection, which could be applied in more bioanalytical systems.

Gold nanorods and their plasmonic properties

Gold nanorods have been receiving extensive attention owing to their extremely attractive applications in biomedical technologies, plasmon-enhanced spectroscopies, and optical and optoelectronic devices. The growth methods and plasmonic properties of Au nanorods have therefore been intensively studied. In this review, we present a comprehensive overview of the flourishing field of Au nanorods in the past five years. We will focus mainly on the approaches for the growth, shape and size tuning, functionalization, and assembly of Au nanorods, as well as the methods for the preparation of their hybrid structures. The plasmonic properties and the associated applications of Au nanorods will also be discussed in detail.

Surface-functionalized nanoparticles for biosensing and imaging-guided therapeutics

In this article, the very recent progress of various functional inorganic nanomaterials is reviewed including their unique properties, surface functionalization strategies, and applications in biosensing and imaging-guided therapeutics. The proper surface functionalization renders them with stability, biocompatibility and functionality in physiological environments, and further enables their targeted use in bioapplications after bioconjugation via selective and specific recognition. The surface-functionalized nanoprobes using the most actively studied nanoparticles (i.e., gold nanoparticles, quantum dots, upconversion nanoparticles, and magnetic nanoparticles) make them an excellent platform for a wide range of bioapplications. With more efforts in recent years, they have been widely developed as labeling probes to detect various biological species such as proteins, nucleic acids and ions, and extensively employed as imaging probes to guide therapeutics such as drug/gene delivery and photothermal/photodynamic therapy.

Ion-directed assembly of gold nanorods: a strategy for mercury detection

Water-soluble gold nanorods (Au NRs) have been functionalized with an N-alkylaminopyrazole ligand, 1-[2-(octylamino)ethyl]-3,5-diphenylpyrazole (PyL), that has been demonstrated able to coordinate heavy metal ions. The N-alkylaminopyrazole functionalized Au NRs have been characterized by electron microscopy and spectroscopic investigation and tested in optical detection experiments of different ions, namely, Zn(2+), Cd(2+), Hg(2+), Cu(2+), Pb(2+), and As(3+). In particular, the exposure of the functionalized NRs to increasing amounts of Hg(2+) ions has resulted in a gradual red-shift and broadening of the longitudinal plasmon band, up to 900 nm. Interestingly, a significantly different response has been recorded for the other tested ions. In fact, no significant shift in the longitudinal plasmon band has been observed for any of them, while a nearly linear reduction in the plasmon band intensity versus ion concentration in solution has been detected. The very high sensitivity for Hg(2+) with respect to other investigated ions, with a limit of detection of 3 ppt, demonstrates that the functionalization of Au NRs with PyL is a very effective method to be implemented in a reliable colorimetric sensing device, able to push further down the detection limit achieved by applying similar strategies to spherical Au NPs.

Novel Hg2+-imprinted polymers based on thymine-Hg2+-thymine interaction for highly selective preconcentration of Hg2+ in water samples

A novel functional monomer T-IPTS, 3-isocyanatopropyltriethoxysilane (IPTS) bearing thymine (T) bases, was synthesized for imprinting Hg(2+). Then a novel Hg(2+) ionic imprinted polymers (IIPs) based on thymine-Hg(2+)-thymine (T-Hg(2+)-T) interactions, i.e. Hg-IIPs-T, were prepared by sol-gel process for the first time in this work. The Hg-IIPs-T exhibited excellent selectivity towards Hg(2+) over Cd(2+), Zn(2+) Pb(2+), Co(2+), Mn(2+), Mg(2+) and Ca(2+), due to the specific T-Hg(2+)-T interactions with high selectivity and high affinity. Accordingly, Hg-IIPs-T were used as solid-phase extraction (SPE) sorbents for preconcentration of trace Hg(2+) in water samples, and satisfactory recoveries ranging from 95.2 to 116.3% were obtained. Also, under optimized conditions, preconcentration factor and detection limit were achieved of 200 and 0.03 μg L(-1), respectively. The IIPs-T-SPE proved to be a rapid and high-effective cleanup and enrichment method for trace Hg(2+) in water samples. More importantly, these results indicated that devising and synthesizing new functional monomers tailor-made for template would become a general promising way to improve the selectivity and stability of IIPs.

"Turn-on" fluorescence detection of lead ions based on accelerated leaching of gold nanoparticles on the surface of graphene

A novel platform for effective "turn-on" fluorescence sensing of lead ions (Pb(2+)) in aqueous solution was developed based on gold nanoparticle (AuNP)-functionalized graphene. The AuNP-functionalized graphene exhibited minimal background fluorescence because of the extraordinarily high quenching ability of AuNPs. Interestingly, the AuNP-functionalized graphene underwent fluorescence restoration as well as significant enhancement upon adding Pb(2+), which was attributed to the fact that Pb(2+) could accelerate the leaching rate of the AuNPs on graphene surfaces in the presence of both thiosulfate (S(2)O(3)(2-)) and 2-mercaptoethanol (2-ME). Consequently, this could be utilized as the basis for selective detection of Pb(2+). With the optimum conditions chosen, the relative fluorescence intensity showed good linearity versus logarithm concentration of Pb(2+) in the range of 50-1000 nM (R = 0.9982), and a detection limit of 10 nM. High selectivity over common coexistent metal ions was also demonstrated. The practical application had been carried out for determination of Pb(2+) in tap water and mineral water samples. The Pb(2+)-specific "turn-on" fluorescence sensor, based on Pb(2+) accelerated leaching of AuNPs on the surface of graphene, provided new opportunities for highly sensitive and selective Pb(2+) detection in aqueous media.