Synergistic effect of manganese (II) phosphate & diamond nanoparticles in electrochemical sensors for reactive oxygen species determination in seminal plasma

In this work, we explore the ability of manganese (II) phosphate (MnP) as a catalytic element for the determination of reactive oxygen species (ROS) in seminal plasma, when MnP is employed as modifier of a glassy carbon electrode. The electrochemical response of the manganese (II) phosphate-modified electrode shows a wave at around +0.65 V due to the oxidation of Mn²⁺ to MnO₂⁺, which is clearly enhanced after addition of superoxide, the molecule considered as the mother of ROS. Once proved the suitability of manganese (II) phosphate as catalyst, we evaluate the effect of including a 0D (diamond nanoparticles) or a 2D (ReS₂) nanomaterial in the sensor design. The system consisting of manganese (II) phosphate and diamond nanoparticles yielded the largest improvement of the response. The morphological characterization of the sensor surface was performed by scanning electron microscopy and atomic force microscopy, while cyclic and differential pulse voltammetry were employed for the electrochemical characterization of the sensor. After optimizing the sensor construction, calibration procedures by chronoamperometry were performed, leading to a linear relation between peak intensity and the superoxide concentration in the range of 1.1 10^-4 M - 1.0 10^-3 M with a limit of detection of 3.2 10^-5 M. Seminal plasma samples were analysed by the standard addition method. Moreover, the analysis of samples fortified with superoxide at the μM level leads to recoveries of 95%.

Electrochemical Sensors for the Detection of Reactive Oxygen Species in Biological Systems: A Critical Review

Reactive oxygen species (ROS) involving superoxide anion, hydrogen peroxide and hydroxyl radical play important role in human health. ROS are known to be the markers of oxidative stress associated with different pathologies including neurodegenerative and cardiovascular diseases, as well as cancer. Accordingly, ROS level detection in biological systems is an essential problem for biomedical and analytical research. Electrochemical methods seem to have promising prospects in ROS determination due to their high sensitivity, rapidity, and simple equipment. This review demonstrates application of modern electrochemical sensors for ROS detection in biological objects (e.g., cell lines and body fluids) over a decade between 2011 and 2021. Particular attention is paid to sensors materials and various types of modifiers for ROS selective detection. Moreover, the sensors comparative characteristics, their main advantages, disadvantages and their possibilities and limitations are discussed.

Tailoring pore structures with optimal mesopores to remarkably promote DNA adsorption guiding the growth of active Mn3(PO4)2 toward sensitive superoxide biomimetic enzyme sensors

The great challenge in preparing a biomimetic enzyme sensor is to have sensitivity and selectivity equal to or better than its corresponding biological sensor. Porous electrodes possess a large surface area and are often used to greatly improve the sensor sensitivity. However, how to tailor the pore structure, especially the pore size distribution to further improve the sensitivity and selectivity of a biomimetic sensor, has not been investigated yet. The superoxide anion (O2˙-) plays essential roles in various biological processes and is of importance in clinical diagnosis and life science research. It is generally detected by the superoxide dismutase enzyme. Herein, we delicately tailor the pore structure of carbon nanofibers (CNFs) by pyrolysis to obtain an optimal mesopore structure for strong adsorption of DNA, followed by guiding the growth of Mn3(PO4)2 as a biomimetic enzyme toward highly sensitive detection of O2˙-. The Mn3(PO4)2-DNA/CNF sensor achieves the best sensitivity among the reported O2˙- sensors while possessing good selectivity. The enhancement mechanism is also investigated, indicating that the mesopore ratio of CNFs plays an essential role in the high sensitivity and selectivity due to their strong adsorption of DNA for guiding the growth of a large amount of uniform sensing components, Mn3(PO4)2, toward high sensitivity and selectivity. The biomimetic sensor was further used to in situ monitor O2˙- released from human keratinocyte cells and human malignant melanoma cells under drug stimulation, showing high sensitivity to real-time quantitative detection of O2˙-. This work provides a highly sensitive in situ real-time biomimetic O2˙- sensor for applications in biological research and diagnosis, while shedding light on the enhancement mechanism of the pore structure, especially the pore size distribution of a porous electrode for high performance sensing processes.

An ultrasensitive biosensor for superoxide anion based on hollow porous PtAg nanospheres

The accurate detection of the superoxide anion (O₂^•-) has vital academic and medical diagnostic significance due to its important dual roles in biological functioning. In this work, hollow porous PtAg nanospheres (PtAg HPNSs) were fabricated by a facile hydrothermal method followed by a dealloying procedure. The as-made PtAg nanospheres possessed hollow interiors and porous shells composed of interconnected ligaments and pores with the typical size around 4 nm. Benefitting from the unique hollow nanoporous architecture and the specific alloying effect, the PtAg HPNSs showed high electrocatalytic activity towards superoxide anions. The constructed biosensor based on PtAg HPNSs presented a fast and ultrasensitive response in a wide range of 0.8-1080 nM with much higher sensitivity of 4.5 × 10^-2 μA cm^-2 nM^-1 and low detection limit of 0.2 nM (S/N = 3). Moreover, the novel biosensors can achieve electrochemical detection for O₂^•- released from living cells, exhibiting outstanding real time detection capability in cell environment. The facile controllable fabrication and unique sensing performance for PtAg HPNSs offers potential practical applications in developing highly sensitive and stable biosensor towards superoxide anion.

Applications of zeolites in biotechnology and medicine – a review

Zeolites are microporous natural or synthetic tectosilicates, promising for organism detoxification, improvement of the nutrition status and immunity, separation of various biomolecules and cells, detection of biomarkers of various diseases, controlled drug and gene delivery, radical scavenging, haemostasis, tissue engineering and biomaterial coating.

Superoxide Anion Biosensor Based on Bionic-Enzyme Hyperbranched Polyester Particles

Self-assembly techniques have been demonstrated to be a useful approach to developing new functional nanomaterials. In this study, a novel method to fabricate a manganese phosphate self-assembly monolayer (SAM) on a hyperbranched polyester (HBPE-OH) nanoparticle surface is described. First, the second-generation aliphatic HBPE-OH was carboxy-terminated, phosphorylated, and then ionized with manganese by a three-step modification process. The final product of HBPE-AMPA-Mn2+ particles was obtained and characterised by FT-IR spectroscopy, 1H NMR spectroscopy, transmission electron microscopy (TEM), Zeta potential, and energy dispersive spectroscopy (EDS). Moreover, the HBPE-AMPA-Mn2+ particles were used to construct a novel biosensor for detection of superoxide anions (O2•−) released from HeLa cells. Results showed that the response currents of this biosensor were proportional to the O2•− concentration ranging from 0.79 to 16.6 μM, and provided an extremely low detection limit of 0.026 μM (S/N = 3). The results indicate that the particle-decorated electrode surface, which involved a hyperbranched structure and a surface self-assembly technology, proposed here will offer the ideal catalytic system for electrochemical enzymatic sensors.

Manganese Phosphate Self-assembled Nanoparticle Surface and Its application for Superoxide Anion Detection

Quantitative analysis of superoxide anion (O2(·-)) has increasing importance considering its potential damages to organism. Herein, a novel Mn-superoxide dismutase (MnSOD) mimics, silica-manganous phosphate (SiO2-Mn3(PO4)2) nanoparticles, were designed and synthesized by surface self-assembly processes that occur on the surface of silica-phytic acid (SiO2-PA) nanoparticles. The composite nanoparticles were characterized by fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), scanning electronic microscopy (SEM), electron diffraction pattern, energy dispersive spectroscopy (EDS) and elemental mapping. Then the electrochemical measurements of O2(·-) based on the incorporation of SiO2-Mn3(PO4)2 onto the surface of electrodes were performed, and some satisfactory results were obtained. This is the first report that manganous phosphate (Mn3(PO4)2) nanoparticles with shape-controlled, but not multilayer sheets, were utilized for O2(·-) detection. The surface self-assembly technology we proposed will offer the ideal material to construct more types biosensor and catalytic system for its nanosized effect.

Preconcentration of synthetic phenolic antioxidants by using magnetic zeolites derived with carboxylatocalix[4]arenes combined with high performance liquid chromatography

A hybrid adsorbent assembling carboxylatocalix[4]arene onto the surface of magnetic zeolite was prepared and used for the preconcentration and determination of synthetic phenolic antioxidants coupled with HPLC.