Constructing Hollow Multishelled Microreactors with a Nanoconfined Microenvironment for Ofloxacin Degradation through Peroxymonosulfate Activation: Evolution of High-Valence Cobalt-Oxo Species

This study constructed hollow multishelled microreactors with a nanoconfined microenvironment for degrading ofloxacin (OFX) through peroxymonosulfate (PMS) activation in Fenton-like advanced oxidation processes (AOPs), resulting in adequate contaminant mineralization. Among the microreactors, a triple-shelled Co-based hollow microsphere (TS-Co/HM) exhibited optimal performance; its OFX degradation rate was 0.598 min-1, which was higher than that of Co3O4 nanoparticles by 8.97-fold. The structural tuning of Co/HM promoted the formation of oxygen vacancies (VO), which then facilitated the evolution of high-valence cobalt-oxo (Co(IV)═O) and shifted the entire t2g orbital of the Co atom upward, promoting catalytic reactions. Co(IV)═O was identified using a phenylmethyl sulfoxide (PMSO) probe and in situ Raman spectroscopy, and theoretical calculations were conducted to identify the lower energy barrier for Co(IV)═O formation on the defect-rich catalyst. Furthermore, the TS-Co/HM catalyst exhibited remarkable stability in inorganic (Cl-, H2PO4-, and NO3-), organic (humic acid), real water samples (tap water, river water, and hospital water), and in a continuous flow system in a microreactor. The nanoconfined microenvironment could enrich reactants in the catalyst cavities, prolong the residence time of molecules, and increase the utilization efficiency of Co(IV)═O. This work describes an activation process involving Co(IV)═O for organic contaminants elimination. Our results may encourage the use of multishelled structures and inform the design of nanoconfined catalysts in AOPs.

Nanoparticle design and assembly for p-type metal oxide gas sensors

Metal oxide semiconductors have wide band gaps with tailorable electrical properties and high stability, suitable for chemiresistive gas sensors. p-Type oxide semiconductors generally have less sensitivity than their n-type counterparts but provide unique functionality with low humidity dependence. Among various approaches to enhance the p-type characteristics, nanostructuring of active materials is essential to exhibit high sensing performances comparable to n-type materials. Moreover, p-n heterojunction formation can achieve superior sensitivity at low operating temperatures. The representative examples are hollow and urchin-like particles, mesoporous structures, and nanowire networks. These morphologies can generate abundant active surface sites with a high surface area and induce rapid gas diffusion and facile charge transport. For growing interests in environmental and healthcare monitoring, p-type oxide semiconductors and their heterojunctions with well-designed nanostructures gain much attention as advanced gas sensing materials for practical applications. In addition to precise nanostructure design, the combination with other strategies, e.g. light activation and multiple gas sensing analysis using sensor arrays will be able to fabricate the desired gas sensors with exclusive gas detection at ultra-low concentrations operating even at room temperature.

UV-enhanced NO2sensor using ZnO quantum dots sensitized SnO2porous nanowires

ZnO quantum dots sensitized SnO₂porous nanowires were fabricated and designed for UV excitation gas sensor. The ZnO/SnO₂composite (SZQ1%) with the molar proportion of 1:100 exhibits excellent sensing properties to NO₂gas under UV irradiation at 40 °C. The limits of detection of the SZQ1% sensor is 100 ppb. The humidity stability of SZQ1% was also measured and discussed by DC reversed circuit and complex impedance curves. The gas sensing mechanism is well discussed and illustrated to the ZnO quantum dots sensitized and the increased photo-generated carriers under UV irradiation.

Principles of odor coding in vertebrates and artificial chemosensory systems

The biological olfactory system is the sensory system responsible for the detection of the chemical composition of the environment. Several attempts to mimic biological olfactory systems have led to various artificial olfactory systems using different technical approaches. Here we provide a parallel description of biological olfactory systems and their technical counterparts. We start with a presentation of the input to the systems, the stimuli, and treat the interface between the external world and the environment where receptor neurons or artificial chemosensors reside. We then delineate the functions of receptor neurons and chemosensors as well as their overall I-O relationships. Up to this point, our account of the systems goes along similar lines. The next processing steps differ considerably: while in biology the processing step following the receptor neurons is the "integration" and "processing" of receptor neuron outputs in the olfactory bulb, this step has various realizations in electronic noses. For a long period of time, the signal processing stages beyond the olfactory bulb, i.e., the higher olfactory centers were little studied. Only recently there has been a marked growth of studies tackling the information processing in these centers. In electronic noses, a third stage of processing has virtually never been considered. In this review, we provide an up-to-date overview of the current knowledge of both fields and, for the first time, attempt to tie them together. We hope it will be a breeding ground for better information, communication, and data exchange between very related but so far little connected fields.

Socio-economic demands and challenges for non-invasive disease diagnosis through a portable breathalyzer by the incorporation of 2D nanosheets and SMO nanocomposites

Breath analysis for non-invasive clinical diagnostics and treatment progression has penetrated the research community owing to the technological developments in novel sensing nanomaterials. The trace level selective detection of volatile organic compounds (VOCs) in breath facilitates the study of physiological disorder and real-time health monitoring. This review focuses on advancements in chemiresistive gas sensor technology for biomarker detection associated with different diseases. Emphasis is placed on selective biomarker detection by semiconducting metal oxide (SMO) nanostructures, 2-dimensional nanomaterials (2DMs) and nanocomposites through various optimization strategies and sensing mechanisms. Their synergistic properties for incorporation in a portable breathalyzer have been elucidated. Furthermore, the socio-economic demands of a breathalyzer in terms of recent establishment of startups globally and challenges of a breathalyzer are critically reviewed. This initiative is aimed at highlighting the challenges and scope for improvement to realize a high performance chemiresistive gas sensor for non-invasive disease diagnosis.

Breath analysis for non-invasive clinical diagnostics and treatment progression has penetrated the research community owing to the technological developments in novel sensing nanomaterials.

Self-Assembled Monolayers Coated Porous SnO2 Film Gas Sensor with Reduced Humidity Influence

Metal-oxide sensors, detect gas through the reaction of surface oxygen molecules with target gases, are promising for the detection of toxic pollutant gases, combustible gases, and organic vapors; however, their sensitivity, selectivity, and long-term stability limit practical applications. Porous structure for increasing surface area, adding catalyst, and altering the operation temperature are proposed for enhancing the sensitivity and selectivity. Although humidity can significantly affect the property and stability of the sensors, studies focusing on the long-term stability of gas sensors are scarce. To reduce the effects of humidity, 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (PFOTS) was coated on a porous SnO₂ film. The interconnected SnO₂ nanowires improved the high surface area, and the PFOTS coating provided superhydrophobicity at water contact angle of 159°and perfect water vapor repellency inside E-SEM. The superhydrophobic porous morphology was maintained under relative humidity of 99% and operating temperature of 300 °C. The CO gas sensing of 5, 20, and 50 ppm were obtained with linearity at various humidity. Flame detection was also achieved with practical high humidity conditions. These results suggest the simple way for reliable sensing of nanostructured metal-oxide gas sensors with high sensitivity and long-term stability even in highly humid environments.

Development of high-performance sensor based on NiO/SnO2 heterostructures to study sensing properties towards various reducing gases

In this work, we report the spontaneous formation of NiO nanoparticles-decorated onto smooth SnO₂ nanofibers, which is an inexpensive and scalable method for yielding a high composite surface area via a simple two-step synthesis process based on electrospinning and the hydrothermal method. A Nickel Oxide proton-conducting electrolyte is deposited homogeneously over a large surface area in a transparent solution, mixed and decorated onto Tin dioxide nanofibers, as evidenced by cross sectional imaging of the electrospun nanofibers. The composite based on nanoparticle-decorated fibers enlarges the surface area of the exposed electrolyte, which fundamentally improves the overall gas sensing performance. The crystal structure, morphology, and physio-chemical surface state of the NiO/SnO₂-based specimen are comprehensively examined using XRD, SEM, TEM, HRTEM, EDX, and photoelectron (XPS) spectroscopy. The composite based on NiO/SnO₂ nanoparticle-decorated fibers exhibits an optimistic mesoporous nature with a huge specific area, which is key for superior gas sensors. The result reveals that NiO/SnO₂ nanoparticle-decorated fibers with an average size of 180-260 nm in diameter, where the average length of fibers was about 1.5 μm. The composite-based heterojunction of NiO/SnO₂ nanoparticle-decorated fibers enhances the adsorption of oxygen molecules, which show fast response, good selectivity and quick recovery speed against ethanol gas at an optimal temperature of about 160 °C. The maximum sensitivity response of the sensor-based composite NiO/SnO₂ nanoparticle-decorated fibers was 23.87 in respect of 100 ppm ethanol gas at a low temperature of 160 °C; this is approximately about 7.2 times superior to that of pure SnO₂ nanofibers. The superior gas sensing capabilities of a composite based on NiO/SnO₂ nanoparticle-decorated fibers may be attributable to the enhanced catalytic effect of the small sized NiO nanoparticles on smooth SnO₂ nanofibers, together with the p/n heterojunction effects between NiO and SnO₂ heterostructures.

Sr-Doped Cubic In2O3/Rhombohedral In2O3 Homojunction Nanowires for Highly Sensitive and Selective Breath Ethanol Sensing: Experiment and DFT Simulation Studies

In recent years, it is urgent and challenging to fabricate highly sensitive and selective gas sensors for breath analyses. In this work, Sr-doped cubic In₂O₃/rhombohedral In₂O₃ homojunction nanowires (NWs) are synthesized by one-step electrospun technology. The Sr doping alters the cubic phase of pure In₂O₃ into the rhombohedral phase, which is verified by the high-resolution transmittance electron microscopy, X-ray diffraction, and Raman spectroscopy, and is attributable to the low cohesive energy as calculated by the density functional theory (DFT). As a proof-of-concept of fatty liver biomarker sensing, ethanol sensors are fabricated using the electrospun In₂O₃ NWs. The results show that 8 wt % Sr-doped In₂O₃ shows the highest ethanol sensing performance with a high response of 21-1 ppm, a high selectivity over other interfering gases such as methanol, acetone, formaldehyde, toluene, xylene, and benzene, a high stability measured in 6 weeks, and also a high resistance to high humidity of 80%. The outstanding ethanol sensing performance is attributable to the enhanced ethanol adsorption by Sr doping as calculated by DFT, the stable rhombohedral phase and the preferred (104) facet exposure, and the formed homojunctions favoring the electron transfer. All these results show the effective structural modification of In₂O₃ by Sr doping, and also the great potency of the homojunction Sr-doped In₂O₃ NWs for highly sensitive, selective, and stable breath ethanol sensing.

Heterostructured NiO/ZnO Nanorod Arrays with Significantly Enhanced H2S Sensing Performance

H2S gas sensors were fabricated using p-n heterojunctions of NiO/ZnO, in which the ZnO nanorod arrays were wrapped with NiO nanosheets via a hydrothermal synthesis method. When the H2S gas molecules were adsorbed and then oxidized on the ZnO surfaces, the free electrons were released. The increase in the electron concentration on the ZnO boosts the transport speed of the electrons on both sides of the NiO/ZnO p-n junction, which significantly improved the sensing performance and selectivity for H2S detection, if compared with sensors using the pure ZnO nanorod arrays. The response to 20 ppm of H2S was 21.3 at 160 °C for the heterostructured NiO/ZnO sensor, and the limit of detection was 0.1 ppm. We found that when the sensor was exposed to H2S at an operating temperature below 160 °C, the resistance of the sensor significantly decreased, indicating its n-type semiconductor nature, whereas when the operating temperature was above 160 °C, the resistance significantly increased, indicating its p-type semiconductor nature. The sensing mechanism of the NiO/ZnO heterostructured H2S gas sensor was discussed in detail.

NiO nanoparticle-decorated SnO2 nanosheets for ethanol sensing with enhanced moisture resistance

In a high relative humidity (RH) environment, it is challenging for ethanol sensors to maintain a high response and excellent selectivity. Herein, tetragonal rutile SnO₂ nanosheets decorated with NiO nanoparticles were synthesized by a two-step hydrothermal process. The NiO-decorated SnO₂ nanosheet-based sensors displayed a significantly improved sensitivity and excellent selectivity to ethanol gas. For example, the 3 mol% NiO-decorated SnO₂ (SnO₂-3Ni) sensor reached its highest response (153 at 100 ppm) at an operating temperature of 260 °C. Moreover, the SnO₂-3Ni sensor had substantially improved moisture resistance. The excellent properties of the sensors can be attributed to the uniform dispersion of the NiO nanoparticles on the surface of the SnO₂ nanosheets and the formation of NiO-SnO₂ p-n heterojunctions. Considering the long-term stability and reproducibility of these sensors, our study suggests that the NiO nanoparticle-decorated SnO₂ nanosheets are a promising material for highly efficient detection of ethanol.

Glass-Fabric Reinforced Ag Nanowire/Siloxane Composite Heater Substrate: Sub-10 nm Metal@Metal Oxide Nanosheet for Sensitive Flexible Sensing Platform

The development of flexible chemiresistors is imperative for real-time monitoring of air quality and/or human physical conditions without space constraints. However, critical challenges such as poor sensing characteristics, vulnerability under toxic chemicals, and weak reliability hinder their practical use. In this work, for the first time, an ultrasensitive flexible sensing platform is reported by assembling Pt loaded thin-layered (≈10 nm) SnO₂ nanosheets (Pt-SnO₂ NSs) based 2D sensing layers on Ag nanowires embedded glass-fabric reinforced vinyl-phenyl siloxane hybrid composite substrate (AgNW-GFRVPH film) as a heater. The thermally stable AgNW-GFRVPH film based heater is fabricated by free radical polymerization of vinyl groups in vinyl-phenyl oligosiloxane and phenyltris(dimethylvinylsiloxy)silane with Ag NW and glass-fabric, showing outstanding heat generation (≈200 °C), high dimensional stability (13 ppm °C^-1), and good thermal stability (≈350 °C). The Pt-SnO₂ NSs, which are synthesized by calcination of Sn precursor coated graphene oxide (GO) sheets and subsequent Pt functionalization, exhibit high mechanical flexibility and superior response (R_air/R_gas = 4.84) to 1 ppm level dimethyl sulfide. Taking these advantages, GO-templated oxide NSs combined with a highly stable AgNW-GFRVPH film heater exhibits the best dimethyl sulfide sensing performance compared to state-of-the-art flexible chemiresistors, enabling them as a superior flexible gas sensing platform.

A New Insight into Cross-Sensitivity to Humidity of SnO2 Sensor

The efficiency of gas sensors varies enormously from fundamental study to practical application. This big gap comes mainly from the complex and unpredictable effect of atmospheric environment, especially in humidity. Here, the cross-sensitivity to humidity of a SnO₂ sensor from local structural and lattice evolutions is studied. The sensing response of ethanol is found to be efficiently activated by adsorbing trace of water but inhibited as humidity increases. By X-ray diffraction, pair distribution function of synchrotron and ab initio calculations, the independent effect of water and ethanol on lattice and local structure are clearly revealed, which elucidate the intricate sensing reactions. The formation of hydrogen bonds and repulsion of ethoxides play key roles in the structural distortions, and also in adsorption energies that are critical to the sensitive behavior. The results show the sensor performance coupled with local structural evolution, which provides a new insight into the controversial effects of humidity on SnO₂ sensors.

Toward Tunable Photonic Nanosheet Sensors: Strong Influence of the Interlayer Cation on the Sensing Characteristics

An approach toward intercalant tunable nanosheet-based Fabry-Pérot sensors is presented. The intercalant tetrabutylammonium significantly increases the sensitivity of the photonic nose sensor to volatile organic compounds with increasing polarity, enabling polarity-driven color-coded vapor differentiation. Paired with the improved millisecond response times for polar vapors, vapor imaging with spatio-temporal resolution is within reach.

High-Resolution p-Type Metal Oxide Semiconductor Nanowire Array as an Ultrasensitive Sensor for Volatile Organic Compounds

The development of high-performance volatile organic compound (VOC) sensor based on a p-type metal oxide semiconductor (MOS) is one of the important topics in gas sensor research because of its unique sensing characteristics, namely, rapid recovery kinetics, low temperature dependence, high humidity or thermal stability, and high potential for p-n junction applications. Despite intensive efforts made in this area, the applications of such sensors are hindered because of drawbacks related to the low sensitivity and slow response or long recovery time of p-type MOSs. In this study, the VOC sensing performance of a p-type MOS was significantly enhanced by forming a patterned p-type polycrystalline MOS with an ultrathin, high-aspect-ratio (∼25) structure (∼14 nm thickness) composed of ultrasmall grains (∼5 nm size). A high-resolution polycrystalline p-type MOS nanowire array with a grain size of ∼5 nm was fabricated by secondary sputtering via Ar(+) bombardment. Various p-type nanowire arrays of CuO, NiO, and Cr2O3 were easily fabricated by simply changing the sputtering material. The VOC sensor thus fabricated exhibited higher sensitivity (ΔR/Ra = 30 at 1 ppm hexane using NiO channels), as well as faster response or shorter recovery time (∼30 s) than that of previously reported p-type MOS sensors. This result is attributed to the high resolution and small grain size of p-type MOSs, which lead to overlap of fully charged zones; as a result, electrical properties are predominantly determined by surface states. Our new approach may be used as a route for producing high-resolution MOSs with particle sizes of ∼5 nm within a highly ordered, tall nanowire array structure.

Recent Developments in p-Type Oxide Semiconductor Materials and Devices

The development of transparent p-type oxide semiconductors with good performance may be a true enabler for a variety of applications where transparency, power efficiency, and greater circuit complexity are needed. Such applications include transparent electronics, displays, sensors, photovoltaics, memristors, and electrochromics. Hence, here, recent developments in materials and devices based on p-type oxide semiconductors are reviewed, including ternary Cu-bearing oxides, binary copper oxides, tin monoxide, spinel oxides, and nickel oxides. The crystal and electronic structures of these materials are discussed, along with approaches to enhance valence-band dispersion to reduce effective mass and increase mobility. Strategies to reduce interfacial defects, off-state current, and material instability are suggested. Furthermore, it is shown that promising progress has been made in the performance of various types of devices based on p-type oxides. Several innovative approaches exist to fabricate transparent complementary metal oxide semiconductor (CMOS) devices, including novel device fabrication schemes and utilization of surface chemistry effects, resulting in good inverter gains. However, despite recent developments, p-type oxides still lag in performance behind their n-type counterparts, which have entered volume production in the display market. Recent successes along with the hurdles that stand in the way of commercial success of p-type oxide semiconductors are presented.

Self-assembled SnO2 micro- and nanosphere-based gas sensor thick films from an alkoxide-derived high purity aqueous colloid precursor

Tin oxide is considered to be one of the most promising semiconductor oxide materials for use as a gas sensor. However, a simple route for the controllable build-up of nanostructured, sufficiently pure and hierarchical SnO2 structures for gas sensor applications is still a challenge. In the current work, an aqueous SnO2 nanoparticulate precursor sol, which is free of organic contaminants and sorbed ions and is fully stable over time, was prepared in a highly reproducible manner from an alkoxide Sn(OR)4 just by mixing it with a large excess of pure neutral water. The precursor is formed as a separate liquid phase. The structure and purity of the precursor is revealed using XRD, SAXS, EXAFS, HRTEM imaging, FTIR, and XRF analysis. An unconventional approach for the estimation of the particle size based on the quantification of the Sn-Sn contacts in the structure was developed using EXAFS spectroscopy and verified using HRTEM. To construct sensors with a hierarchical 3D structure, we employed an unusual emulsification technique not involving any additives or surfactants, using simply the extraction of the liquid phase, water, with the help of dry butanol under ambient conditions. The originally generated crystalline but yet highly reactive nanoparticles form relatively uniform spheres through self-assembly and solidify instantly. The spheres floating in butanol were left to deposit on the surface of quartz plates bearing sputtered gold electrodes, producing ready-for-use gas sensors in the form of ca. 50 μm thick sphere-based-films. The films were dried for 24 h and calcined at 300 °C in air before use. The gas sensitivity of the structures was tested in the temperature range of 150-400 °C. The materials showed a very quickly emerging and reversible (20-30 times) increase in electrical conductivity as a response to exposure to air containing 100 ppm of H2 or CO and short (10 s) recovery times when the gas flow was stopped.

Co3O4-SnO2 Hollow Heteronanostructures: Facile Control of Gas Selectivity by Compositional Tuning of Sensing Materials via Galvanic Replacement

Co3O4 hollow spheres prepared by ultrasonic spray pyrolysis were converted into Co3O4-SnO2 core-shell hollow spheres by galvanic replacement with subsequent calcination at 450 °C for 2 h for gas sensor applications. Gas selectivity of the obtained spheres can be controlled by varying the amount of SnO2 shells (14.6, 24.3, and 43.3 at. %) and sensor temperatures. Co3O4 sensors possess an ability to selectively detect ethanol at 275 °C. When the amount of SnO2 shells was increased to 14.6 and 24.3 at. %, highly selective detection of xylene and methylbenzenes (xylene + toluene) was achieved at 275 and 300 °C, respectively. Good selectivity of Co3O4 hollow spheres to ethanol can be explained by a catalytic activity of Co3O4; whereas high selectivity of Co3O4-SnO2 core-shell hollow spheres to methylbenzenes is attributed to a synergistic effect of catalytic SnO2 and Co3O4 and promotion of gas sensing reactions by a pore-size control of microreactors.

The synthesis and fast ethanol sensing properties of core–shell SnO2@ZnO composite nanospheres using carbon spheres as templates

A special core–shell SnO₂@ZnO composite nanosphere with hollow and porous structures shows excellent ethanol sensing properties.

A CuO–ZnO nanostructured p–n junction sensor for enhanced N-butanol detection

Herein, a novel CuO–ZnO nanostructured p–n junction composite is prepared via the hydrothermal method.

Hierarchical Assembly of α-Fe₂O₃ Nanosheets on SnO2₂Hollow Nanospheres with Enhanced Ethanol Sensing Properties

We present the preparation of a hierarchical nanoheterostructure consisting of inner SnO2 hollow spheres (SHS) surrounded by an outer α-Fe2O3 nanosheet (FNS). Deposition of the FNS on the SHS outer surface was achieved by a facile microwave hydrothermal reaction to generate a double-shell SHS@FNS nanostructure. Such a composite with novel heterostructure acted as a sensing material for gas sensors. Significantly, the hierarchical composites exhibit excellent sensing performance toward ethanol, which is superior to the single component (SHS), mainly because of the synergistic effect and heterojunction.

Ethanol Gas Detection Using a Yolk-Shell (Core-Shell) α-Fe2O3 Nanospheres as Sensing Material

Three-dimensional (3D) nanostructures of α-Fe2O3 materials, including both hollow sphere-shaped and yolk-shell (core-shell)-shaped, have been successfully synthesized via an environmentally friendly hydrothermal approach. By expertly adjusting the reaction time, the solid, hollow, and yolk-shell shaped α-Fe2O3 can be selectively synthesized. Yolk-shell α-Fe2O3 nanospheres display outer diameters of 350 nm, and the interstitial hollow spaces layer is intimately sandwiched between the inner and outer shell of α-Fe2O3 nanostructures. The possible growth mechanism of the yolk-shell nanostructure is proposed. The results showed that the well-defined bilayer interface effectively enhanced the sensing performance of the α-Fe2O3 nanostructures (i.e., yolk-shell α-Fe2O3@α-Fe2O3), owing predominantly to the unique nanostructure, thus facilitated the transport rate and augmented the adsorption quantity of the target gas molecule under gas detection.

Micro/Nano gas sensors: a new strategy towards in-situ wafer-level fabrication of high-performance gas sensing chips

Nano-structured gas sensing materials, in particular nanoparticles, nanotubes, and nanowires, enable high sensitivity at a ppb level for gas sensors. For practical applications, it is highly desirable to be able to manufacture such gas sensors in batch and at low cost. We present here a strategy of in-situ wafer-level fabrication of the high-performance micro/nano gas sensing chips by naturally integrating microhotplatform (MHP) with nanopore array (NPA). By introducing colloidal crystal template, a wafer-level ordered homogenous SnO2 NPA is synthesized in-situ on a 4-inch MHP wafer, able to produce thousands of gas sensing units in one batch. The integration of micromachining process and nanofabrication process endues micro/nano gas sensing chips at low cost, high throughput, and with high sensitivity (down to ~20 ppb), fast response time (down to ~1 s), and low power consumption (down to ~30 mW). The proposed strategy of integrating MHP with NPA represents a versatile approach for in-situ wafer-level fabrication of high-performance micro/nano gas sensors for real industrial applications.

Facile synthesis of hierarchical porous WO3 nanofibers having 1D nanoneedles and their functionalization with non-oxidized graphene flakes for selective detection of acetone molecules

Hierarchical and porous one-dimensional (1D) nonwoven WO₃ nanofibers were synthesized by electrospinning and controlled two-step heat-treatment, and are applicable for diabetes diagnostic sensors by selective detection of breath acetone.

A highly sensitive room temperature H2S gas sensor based on SnO2 multi-tube arrays bio-templated from insect bristles

A tin oxide multi-tube array with a parallel effect was fabricated, which exhibited high sensitivity to H₂S gas at room temperature.

Facile Au catalyst loading on the inner shell of hollow SnO2 spheres using Au-decorated block copolymer sphere templates and their selective H2S sensing characteristics

Hollow SnO2 spheres functionalized by Au catalysts were synthesized via the use of Au-decorated block copolymer (Au-BCP) sphere templates. Uniformly distributed Au nanoparticles on BCP spheres were prepared by the infiltration of Au precursors into polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) spheres. A thin SnO2 layer was coated on the Au-BCP spheres using RF sputtering at room temperature without morphological deformation of the spheres. The Au nanoparticles were uniformly transferred from the Au-BCP spheres to the inner shells of the hollow SnO2 spheres followed by decomposition of BCP spheres. The Au-loaded hollow SnO2 spheres exhibited a superior H2S sensitivity (Rair/Rgas = 17.4 at 5 ppm) with remarkably selective characteristics with a minor response (Rair/Rgas < 2.5 at 5 ppm) toward other interfering gases. Our results pave the way for a new catalyst loading method using Au-BCP spheres for the uniformly distributed Au NPs on the SnO2 layers.

Design of highly sensitive and selective Au@NiO yolk-shell nanoreactors for gas sensor applications

Au@NiO yolk-shell nanoparticles (NPs) were synthesized by simple solution route and applied for efficient gas sensor towards H₂S gas. Carbon encapsulated Au (Au@C core-shell) NPs were synthesized by glucose-assisted hydrothermal method, whereas Au@NiO yolk-shell NPs were synthesized by precipitation method using Au@C core-shell NPs as a template. Sub-micrometer Au@NiO yolk-shell NPs were formed having 50-70 nm Au NPs at the periphery of NiO shell (10-20 nm), which was composed of 6-12 nm primary NiO particles. Au@NiO yolk-shell NPs showed higher response for H2S compared to other interfering gases (ethanol, p-xylene, NH₃, CO and H₂). The maximum response was 108.92 for 5 ppm of H₂S gas at 300 °C, which was approximately 19 times higher than that for the interfering gases. The response of Au@NiO yolk-shell NPs to H₂S was approximately 4 times higher than that of bare NiO hollow nanospheres. Improved performance of Au@NiO yolk-shell NPs was attributed to hollow spaces that allowed the accessibility of Au NPs to gas molecules. It was suggested that adsorption of H₂S on Au NPs resulted in the formation of sulfide layer, which possibly lowered its work function, and therefore tuned the electron transfer from Au to NiO rather NiO to Au, which leaded to increase in resistance and therefore response.

Rh-catalyzed WO3 with anomalous humidity dependence of gas sensing characteristics

An anomalous humidity dependence of gas sensing characteristics is found for a Rh-loaded WO₃ sensor, where the resistance and gas response increased in humid atmospheres.

High performance chemiresistive H2S sensors using Ag-loaded SnO2 yolk–shell nanostructures

Highly selective, sensitive, and reversible H₂S sensors were designed using Ag-loaded SnO₂ yolk–shell nanostructures prepared by one-pot ultrasonic spray pyrolysis.

SnO₂ tube-in-tube nanostructures: Cu@C nanocable templated synthesis and their mutual interferences between heavy metal ions revealed by stripping voltammetry

SnO2 tube-in-tube nanostructures are synthesized using Cu@C nanocables as effective sacrificial templates. It is revealed by stripping voltammetry that SnO2 tube-in-tube nanostructures show excellent performances in the determination of heavy metal ions, which might be related to the extraordinary adsorbing capacities of the hollow structure to metal ions, i.e., metal ions could diffuse into the interior of tubular structure.

Encapsuled nanoreactors (Au@SnO₂): a new sensing material for chemical sensors

New Au@SnO2 yolk-shell nanospheres have been successfully synthesized by using Au@SiO2 nanospheres as sacrificial templates. This process is environmentally friendly and is based on hydrothermal shell-by-shell deposition of polycrystalline SnO2 on spheriform Au@SiO2 nanotemplates. Au nanoparticles can be impregnated into the SnO2 nanospheres and the nanospheres show outer diameters of 110 nm and thicknesses of 15 nm. The possible growth model of the nanospheres is proposed. The gas sensing properties of the Au@SnO2 yolk-shell nanospheres were researched and compared with that of the hollow SnO2 nanospheres. The former shows lower operating temperature (210 °C), lower detection limit (5 ppm), faster response (0.3 s) and better selectivity. These improved sensing properties were attributed to the catalytic effect of Au, and enhanced electron depletion at the surface of the Au@SnO2 yolk-shell nanospheres.

Sodium chloride template synthesis of cubic tin dioxide hollow particles for lithium ion battery applications

This paper describes a new synthesis and lithium ion charge-discharge property of tin dioxide (SnO(2)) hollow nanocubes. SnO(2) is one of the best-known anode materials for lithium-ion battery application because of its high lithiation-delithiation capacity. Hollow nanostructures with high surface area are preferred, because they accommodate large volume changes and maintain the structural stability of electrode materials during charge-discharge cycles. The SnO(2) hollow cubes made in this study had a discharge capacity of up to 1783 mA h g(-1) for the initial cycle and 546 mA h g(-1) after 30 cycles at a current density of 0.2 C between 0.02 and 2.0 V (vs Li/Li(+)).

Co3O4/ZnO nanocomposites: from plasma synthesis to gas sensing applications

Herein, we describe the design, fabrication and gas sensing tests of p-Co(3)O(4)/n-ZnO nanocomposites. Specifically, arrays of (001) oriented ZnO nanoparticles were grown on alumina substrates by plasma enhanced-chemical vapor deposition (PECVD) and used as templates for the subsequent PECVD of Co(3)O(4) nanograins. Structural, morphological and compositional analyses evidenced the successful formation of pure and high-area nanocomposites with a tailored overdispersion of Co(3)O(4) particles on ZnO and an intimate contact between the two oxides. Preliminary functional tests for the detection of flammable/toxic analytes (CH(3)COCH(3), CH(3)CH(2)OH, NO(2)) indicated promising sensing responses and the possibility of discriminating between reducing and oxidizing species as a function of the operating temperature.