Promoting bacteria-anode interfacial electron transfer by palladium nano-complex in double chamber microbial fuel cell

The slow electron transfer between microbial outer membrane and electrode surface is considered one of the limitations of Microbial Fuel Cell (MFC) performance. The aim of the present work is to assess the role of palladium α-lipoic acid nanocomplex compound (PLAC) in promoting bacteria-anode interfacial electron transfer, by studying the dielectric properties of Shewanella oneidensis WW-1 cell membrane and its contribution to biofilm formation on the anode. The results showed that adding PLAC increased bacterial cell membrane permeability and outer cell surface charge. Exopolysaccharides (EPS) and surface-bound proteins increased 2.27 and 1.14 fold, respectively upon adding 0.25% v/v PLAC. Dynamic Light Scattering (DLS) showed uniform distribution of Shewanella-PLAC biocomposite size while Zeta potential and Fourier Transform Infrared (FTIR) Spectroscopy results suggest that PLAC diffused inside the cells. Transmission Electron Microscope (TEM) images reveal Exopolysaccharide (EPS) mat around the cells when PLAC was added to the cells, also confirmed by the FTIR spectrum. Scanning Electron Microscope and Atomic Force Microscope (AFM) confirmed the thickness of biofilm in the presence of PLAC. The average voltage reached 492 mV (external resistance 1 KΩ) over 35 days using 0.25% v/v PLAC as compared to a few hours in MFCs lacking PLAC. The results suggest that the addition of PLAC assisted in interfacial direct electron transfer through enhancing biofilm formation, moreover, its hydrophilic/lipophilic nature facilitated the electron shuttling process from within the bacterial cell to the electrode surface suggesting the involvement of mediated electron transfer as well.

Microbial extracellular electron transfer and strategies for engineering electroactive microorganisms

Electroactive microorganisms (EAMs) are ubiquitous in nature and have attracted considerable attention as they can be used for energy recovery and environmental remediation via their extracellular electron transfer (EET) capabilities. Although the EET mechanisms of Shewanella and Geobacter have been rigorously investigated and are well characterized, much less is known about the EET mechanisms of other microorganisms. For EAMs, efficient EET is crucial for the sustainable economic development of bioelectrochemical systems (BESs). Currently, the low efficiency of EET remains a key factor in limiting the development of BESs. In this review, we focus on the EET mechanisms of different microorganisms, (i.e., bacteria, fungi, and archaea). In addition, we describe in detail three engineering strategies for improving the EET ability of EAMs: (1) enhancing transmembrane electron transport via cytochrome protein channels; (2) accelerating electron transport via electron shuttle synthesis and transmission; and (3) promoting the microbe-electrode interface reaction via regulating biofilm formation. At the end of this review, we look to the future, with an emphasis on the cross-disciplinary integration of systems biology and synthetic biology to build high-performance EAM systems.

Viability and distribution of bacteria immobilized on Sawdust@silica: The removal mechanism of phenanthrene in soil

Immobilized cells (ICs) have been widely used to enhance the remediation of organic-contaminated soil (e.g., polycyclic aromatic hydrocarbons, PAHs). Once ICs are added to the heterogeneous soil, degradation hotspots are immediately formed near the carrier, leaving the remaining soil lack of degrading bacteria. Therefore, it remains unclear how ICs efficiently utilize PAHs in soil. In this study, the viability of Silica-IC (Cells@Sawdust@Silica) and the distribution of inoculated ICs and phenanthrene (Phe) in a slurry system (soil to water ratio 1:2) were investigated to explore the removal mechanism of PAHs by the ICs. Results showed that the Silica-IC maintained (i) good reproductive ability (displayed by the growth curve in soil and water phase), (ii) excellent stability, which was identified by the ratio of colony forming units in the soil phase to the water phase, the difference between the colony number and the DNA copies, and characteristics of the biomaterial observed by the FESEM, and (iii) high metabolic activity (the removal percentages of Phe in soil by the ICs were more than 95% after 48 h). Finally, the possible pathways for the ICs to efficiently utilize Phe in soil are proposed based on the distribution and correlation of Phe and ICs between the soil and water phase. The adsorption-degradation process was dominant, i.e., the enhanced degradation occurred between the ICs and carrier-adsorbed Phe. This study provided new insights on developing a bio-material for efficient bio-remediation of PAHs-contaminated soil.

Strategies for improving the electroactivity and specific metabolic functionality of microorganisms for various microbial electrochemical technologies

Electroactive microorganisms, which possess extracellular electron transfer (EET) capabilities, are the basis of microbial electrochemical technologies (METs) such as microbial fuel and electrolysis cells. These are considered for several applications ranging from the energy-efficient treatment of waste streams to the production of value-added chemicals and fuels, bioremediation, and biosensing. Various aspects related to the microorganisms, electrodes, separators, reactor design, and operational or process parameters influence the overall functioning of METs. The most fundamental and critical performance-determining factor is, however, the microorganism-electrode interactions. Modification of the electrode surfaces and microorganisms for optimizing their interactions has therefore been the major MET research focus area over the last decade. In the case of microorganisms, primarily their EET mechanisms and efficiencies along with the biofilm formation capabilities, collectively considered as microbial electroactivity, affect their interactions with the electrodes. In addition to electroactivity, the specific metabolic or biochemical functionality of microorganisms is equally crucial to the target MET application. In this article, we present the major strategies that are used to enhance the electroactivity and specific functionality of microorganisms pertaining to both anodic and cathodic processes of METs. These include simple physical methods based on the use of heat and magnetic field along with chemical, electrochemical, and growth media amendment approaches to the complex procedure-based microbial bioaugmentation, co-culture, and cell immobilization or entrapment, and advanced toolkit-based biofilm engineering, genetic modifications, and synthetic biology strategies. We further discuss the applicability and limitations of these strategies and possible future research directions for advancing the highly promising microbial electrochemistry-driven biotechnology.

Influence of cytochrome charge and potential on the cathodic current of electroactive artificial biofilms

An electroactive artificial biofilm has been optimized for the cathodic reduction of fumarate by Shewanella oneidensis. The system is based on the self-assembly of multi-walled carbon nanotubes with bacterial cells in the presence of a c-type cytochrome. The aggregates are then deposited on an electrode to form the electroactive artificial biofilm. Six c-type cytochromes have been studied, from bovine heart or Desulfuromonas and Desulfuvibrio strains. The isoelectric point of the cytochrome controls the self-assembly process that occurs only with positively-charged cytochromes. The redox potential of the cytochrome is critical for electron transfer reactions with membrane cytochromes of the Mtr pathway. Optimal results have been obtained with c₃ from Desulfovibrio vulgaris Hildenborough having an isoelectric point of 10.2 and redox potentials of the four hemes ranging between -290 and -375 mV vs SHE. A current density of 170 μA cm^-2 could be achieved in the presence of 50 mM fumarate. The stability of the electrochemical response was evaluated, showing a regular decrease of the current within 13 h, possibly due to the inactivation or leaching of loosely-bound cytochromes from the biofilm.

DNA Hybridization To Interface Current-Producing Cells with Electrode Surfaces

As fossil fuels are increasingly linked to environmental damage, the development of renewable, affordable biological alternative fuels is vital. Shewanella oneidensis is often suggested as a potential component of bioelectrochemical cells because of its ability to act as an electron donor to metal surfaces. These microbes remain challenging to implement, though, due to inconsistency in biofilm formation on electrodes and therefore current generation. We have applied DNA hybridization-based cell adhesion to immobilize S. oneidensis on electrodes. High levels of current are reproducibly generated from these cell layers following only 30 min of immobilization without the need for the formation of a biofilm. Upon incorporation of DNA mismatches in the microbe immobilization sequence, significant attenuation in current production is observed, suggesting that at least part of the electron transfer to the electrode is DNA-mediated. This method of microbe assembly is rapid, reproducible, and facile for the production of anodes for biofuel cells.

Electroactive Biofilms for Sensing: Reflections and Perspectives

Microbial electrochemistry has from the onset been recognized for its sensing potential due to the microbial ability to enhance signals through metabolic cascades, its relative selectivity toward substrates, and the higher stability conferred by the microbial ability to self-replicate. The greatest challenge has been to achieve stable and efficient transduction between a microorganism and an electrode surface. Over the past decades, a new kind of microbial architecture has been observed to spontaneously develop on polarized electrodes: the electroactive biofilm (EAB). The EAB conducts electrons over long distances and performs quasi-reversible electron transfer on conventional electrode surfaces. It also possesses self-regenerative properties. In only a few years, EABs have inspired considerable research interest for use as biosensors for environmental or bioprocess monitoring. Multiple challenges still need to be overcome before implementation at larger scale of this new kind of biosensors can be realized. This perspective first introduces the specific characteristics of the EAB with respect to other electrochemical biosensors. It summarizes the sensing applications currently proposed for EABs, stresses their limitations, and suggests strategies toward potential solutions. Conceptual prospects to engineer EABs for sensing purposes are also discussed.

A bio-hybrid material for adsorption and degradation of phenanthrene: bacteria immobilized on sawdust coated with a silica layer

Membrane permeability of bacteria immobilized in silica-coated sawdust was increased, and its metabolic activity toward Phe was enhanced.

Innovative statistical interpretation of Shewanella oneidensis microbial fuel cells data

The last decade of research has made significant strides toward practical applications of Microbial Fuel Cells (MFCs); however, design improvements and operational optimization cannot be realized without equally considering engineering designs and biological interfacial reactions. In this study, the main factors contributing to MFCs' overall performance and their influence on MFC reproducibility are discussed. Two statistical approaches were used to create a map of MFC components and their expanded uncertainties, principal component analysis (PCA) and uncertainty of measurement results (UMR). PCA was used to identify the major factors influencing MFCs and to determine their ascendency over MFC operational characteristics statistically. UMR was applied to evaluate the factors' uncertainties and estimate their level of contribution to the final irreproducibility. In order to simplify the presentation and concentrate on the MFC components, only results from Shewanella spp. were included; however, a similar analysis could be applied for any DMRB or microbial community. The performed PCA/UMR analyses suggest that better reproducibility of MFC performance can be achieved through improved design parameters. This approach is exactly opposite to the MFC optimization and scale up approach, which should start with improving the bacteria-electrode interactions and applying these findings to well-designed systems.

Sol-Generating Chemical Vapor into Liquid (SG-CViL) Deposition- A Facile Method for Encapsulation of Diverse Cell Types in Silica Matrices

In nature, cells perform a variety of complex functions such as sensing, catalysis, and energy conversion which hold great potential for biotechnological device construction. However, cellular sensitivity to ex-vivo environments necessitates development of bio-nano interfaces which allow integration of cells into devices and maintain their desired functionality. In order to develop such an interface, the use of a novel Sol Generating Chemical Vapor into Liquid (SG-CViL) deposition process for whole cell encapsulation in silica was explored. In SG-CViL, the high vapor pressure of tetramethyl orthosilicate (TMOS) is utilized to deliver silica into an aqueous medium, creating a silica sol. Cells are then mixed with the resulting silica sol, facilitating encapsulation of cells in silica while minimizing cell contact with the cytotoxic products of silica generating reactions (i.e. methanol), and reduce exposure of cells to compressive stresses induced from silica condensation reactions. Using SG-CVIL, Saccharomyces cerevisiae (S. cerevisiae) engineered with an inducible beta galactosidase system were encapsulated in silica solids and remained both viable and responsive 29 days post encapsulation. By tuning SG-CViL parameters thin layer silica deposition on mammalian HeLa and U87 human cancer cells was also achieved. The ability to encapsulate various cell types in either a multi cell (S. cerevisiae) or a thin layer (HeLa and U87 cells) fashion shows the promise of SG-CViL as an encapsulation strategy for generating cell-silica constructs with diverse functions for incorporation into devices for sensing, bioelectronics, biocatalysis, and biofuel applications.

Highly active bidirectional electron transfer by a self-assembled electroactive reduced-graphene-oxide-hybridized biofilm

Low extracellular electron transfer performance is often a bottleneck in developing high-performance bioelectrochemical systems. Herein, we show that the self-assembly of graphene oxide and Shewanella oneidensis MR-1 formed an electroactive, reduced-graphene-oxide-hybridized, three-dimensional macroporous biofilm, which enabled highly efficient bidirectional electron transfers between Shewanella and electrodes owing to high biomass incorporation and enhanced direct contact-based extracellular electron transfer. This 3D electroactive biofilm delivered a 25-fold increase in the outward current (oxidation current, electron flux from bacteria to electrodes) and 74-fold increase in the inward current (reduction current, electron flux from electrodes to bacteria) over that of the naturally occurring biofilms.

Electroanalysis of microbial anodes for bioelectrochemical systems: basics, progress and perspectives

Over about the last ten years, microbial anodes have been the subject of a huge number of fundamental studies dealing with an increasing variety of possible application domains.

Stable and fluid multilayer phospholipid-silica thin films: mimicking active multi-lamellar biological assemblies

Phospholipid-based nanomaterials are of interest in several applications including drug delivery, sensing, energy harvesting, and as model systems in basic research. However, a general challenge in creating functional hybrid biomaterials from phospholipid assemblies is their fragility, instability in air, insolubility in water, and the difficulty of integrating them into useful composites that retain or enhance the properties of interest, therefore limiting there use in integrated devices. We document the synthesis and characterization of highly ordered and stable phospholipid-silica thin films that resemble multilamellar architectures present in nature such as the myelin sheath. We have used a near room temperature chemical vapor deposition method to synthesize these robust functional materials. Highly ordered lipid films are exposed to vapors of silica precursor resulting in the formation of nanostructured hybrid assemblies. This process is simple, scalable, and offers advantages such as exclusion of ethanol and no (or minimal) need for exposure to mineral acids, which are generally required in conventional sol-gel synthesis strategies. The structure of the phospholipid-silica assemblies can be tuned to either lamellar or hexagonal organization depending on the synthesis conditions. The phospholipid-silica films exhibit long-term structural stability in air as well as when placed in aqueous solutions and maintain their fluidity under aqueous or humid conditions. This platform provides a model for robust implementation of phospholipid multilayers and a means toward future applications of functional phospholipid supramolecular assemblies in device integration.

High performance thylakoid bio-solar cell using laccase enzymatic biocathodes

Thylakoid membranes have previously been used for electrochemical solar energy conversion, but the current output and open circuit voltage are low, in part due to limitations of the cathode. In this paper, a thylakoid bioanode and laccase biocathode were combined in the construction of a bio-solar cell capable of light-induced generation of electrical power. This two-compartment cell showed a greater than 5-fold increase in short circuit current density and an open circuit voltage 0.275 V larger than that of a thylakoid bio-solar cell incorporating an air-breathing Pt cathode. The electrodes were then tested in several solutions of varying pH to evaluate the possibility of constructing a compartment-less bio-solar cell. This membrane-less cell, operating at pH 5.5, generated a short circuit photocurrent density of 14.0 ± 1.8 μA cm(-2) which is 25% larger than the two-compartment cell and a similar open circuit voltage of 0.720 ± 0.018 V.

Immobilization of whole cells by chemical vapor deposition of silica

Effective entrapment of whole bacterial cells onto solid-phase materials can significantly improve bioprocessing and other biotechnology applications. Cell immobilization allows integration of biocatalysts in a manner that maintains long-term cell viability and typically enhances process output. A wide variety of functionalized materials have been explored for microbial cell immobilization, and specific advantages and limitations were identified. The method described here is a simple, versatile, and scalable one-step process for the chemical vapor deposition of silica to encapsulate and stabilize viable, whole bacterial cells. The immobilized bacterial population is prepared and captured at a predefined physiological state so as to affix bacteria with a selected metabolic or catalytic capability to compatible materials and surfaces. Immobilization of Shewanella oneidensis to carbon electrodes and immobilization of Acinetobacter venetianus to adsorbent mats are described as model systems.

Facile fabrication of scalable, hierarchically structured polymer/carbon architectures for bioelectrodes

This research introduces a method for fabrication of conductive electrode materials with hierarchical structure from porous polymer/carbon composite materials. We describe the fabrication of (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) scaffolds doped with carbon materials that provide a conductive three-dimensional architecture that was demonstrated for application in microbial fuel cell (MFC) anodes. Composite electrodes from PHBV were fabricated to defined dimensions by solvent casting and particulate leaching of a size-specific porogen (in this case, sucrose). The cellular biocompatibility of the resulting composite material facilitated effective immobilization of a defined preparation of Shewanella oneidensis DSP-10 as a model microbial catalyst. Bacterial cells were immobilized via chemical vapor deposition (CVD) of silica to create an engineered biofilm that exhibits efficient bioelectrocatalysis of a simple-carbon fuel in a MFC. The functionalized PHBV electrodes demonstrate stable and reproducible anodic open circuit potentials of -320 ± 20 mV (vs Ag/AgCl) with lactate as the electron donor. Maximum power densities achieved by the hierarchically structured electrodes (~5 mW cm(3)) were significantly higher than previously observed for graphite-felt electrodes. The methodology for fabrication of scalable electrode materials may be amenable to other bioelectrochemical applications, such as enzyme fuel cells and biosensors, and could easily be adapted to various design concepts.