A disposable sensor based on one-pot synthesized tungsten oxide nanostructure-modified screen printed electrodes for selective detection of dopamine and uric acid

Here, screen-printed carbon electrodes (SPCEs) were modified with ultrafine and mainly mono-disperse sea urchin-like tungsten oxide (SUWO3) nanostructures synthesized by a simple one-pot hydrothermal method for non-enzymatic detection of dopamine (DA) and uric acid (UA) in synthetic urine. Sea urchin-like nanostructures were clearly observed in scanning electron microscope images and WO3 composition was confirmed with XRD, Raman, FTIR and UV-Vis spectrophotometer. Modification of SPCEs with SUWO3 nanostructures via the drop-casting method clearly reduced the Rct value of the electrodes, lowered the ∆Ep and enhanced the DA oxidation current due to high electrocatalytic activity. As a result, SUWO3/SPCEs enabled highly sensitive non-enzymatic detection of DA (LOD: 51.4 nM and sensitivity: 127 µA mM-1 cm-2) and UA (LOD: 253 nM and sensitivity: 55.9 µA mM-1 cm-2) at low concentration. Lastly, SUWO3/SPCEs were tested with synthetic urine, in which acceptable recoveries for both molecules (94.02-105.8%) were obtained. Given the high selectivity, the sensor has the potential to be used for highly sensitive simultaneous detection of DA and UA in real biological samples.

Synthesis of Ag nanoparticles for selective dual detection of glutathione and dopamine using N, N-dimethyl-p-phenylenediamine mediated colorimetric probe

We report a simple and easy method to synthesize Ag nanoparticles (Ag NPs) and demonstrate its potential for the detection of glutathione (GSH) and dopamine (DA) via colorimetric assay. The Ag NPs were found to be monodispersed and spherical with a size of 5 ± 2 nm. The X-ray diffraction (XRD) and high resolution transmission electron microscopy (HR-TEM) investigations revealed the formation of crystalline Ag NPs. The colour of N, N-dimethyl-p-phenylenediamine assay changed from dark pink to colourless when the concentration of GSH was increased from 1 to 40 μM. Notably, the suspension colour changed from dark pink to blue when a similar set of experiments were performed with DA. The UV/Visible and interference experiments of Ag NPs exhibited excellent sensitivity and selectivity against both GSH and DA even after the addition of 40 μM of different interference biomolecules. The calculated limit of detection (LOD) was 141 and 245 nM for GSH and DA, respectively. The real-time analysis with serum samples showed satisfactory recovery percentages of >95 and 80-90% for GSH and DA, respectively. Hence, the Ag NPs reported here have huge potential to serve as a sensitive and selective colorimetric sensor for the detection of GSH and DA for diverse applications ranging from catalysis to cancer therapy and theranostics.

Apta-sensor for selective determination of dopamine using chitosan-stabilized Prussian blue nanoparticles

Chitosan-stabilized Prussian blue nanoparticles (CS/PBNPs) were fabricated by a simple synthetic method and used to develop a novel aptamer-based colorimetric assay for selective determination of dopamine (DA). Scanning electron microscopy (SEM) images exhibited a uniform shape of the CS/PBNPs with an average diameter of 37.0 ± 3.2 nm. The CS/PBNPs exhibited strong peroxidase-like activity that catalyzed the reaction between 3,3',5,5'-tetramethylbenzidine (TMB) and hydrogen peroxide (H₂O₂). Chitosan was used for stabilization of the PBNPs and fixation of the DA aptamer on the surface of the CS/PBNPs. The catalytic mechanism of the CS/PBNPs was confirmed to involve first the decomposition of H₂O₂ into a hydroxyl radical (˙OH) and then oxidation of TMB by the ˙OH to produce a blue color. An aptamer-based colorimetric assay was made with the CS/PBNPs to detect DA at concentrations of 0.25-100 μM with a limit of detection (LOD) of 0.16 μM. For comparison, a gold nanoparticle (AuNP)-based apta-sensor detected DA in concentrations of 1-25 μM with a LOD of 0.55 μM. The recovery results of DA concentrations (0.25, 0.5, and 1 μM) from spiked human serum were 92.6%, 102.1%, and 103.9%, verifying the reliability and reproducibility of the CS/PBNP-based apta-sensor for determination of DA level in clinical applications. Moreover, compared to traditional immunoassay, this aptamer-based nanozyme activation/inhibition system needs no washing step, which is very useful to shorten the assay time and maintain high sensitivity.

Comparison of the Antibacterial Effect of Silver Nanoparticles and a Multifunctional Antimicrobial Peptide on Titanium Surface

Titanium implantation success may be compromised by Staphylococcus aureus surface colonization and posterior infection. To avoid this issue, different strategies have been investigated to promote an antibacterial character to titanium. In this work, two antibacterial agents (silver nanoparticles and a multifunctional antimicrobial peptide) were used to coat titanium surfaces. The modulation of the nanoparticle (≈32.1 ± 9.4 nm) density on titanium could be optimized, and a sequential functionalization with both agents was achieved through a two-step functionalization method by means of surface silanization. The antibacterial character of the coating agents was assessed individually as well as combined. The results have shown that a reduction in bacteria after 4 h of incubation can be achieved on all the coated surfaces. After 24 h of incubation, however, the individual antimicrobial peptide coating was more effective than the silver nanoparticles or their combination against Staphylococcus aureus. All tested coatings were non-cytotoxic for eukaryotic cells.

SERS-based detection of 5-S-cysteinyl-dopamine as a novel biomarker of Parkinson's disease in artificial biofluids

The early detection of Parkinson's disease (PD) can significantly improve treatment and quality of life in patients. 5-S-Cysteinyl-dopamine (CDA) is a key metabolite of high relevance for the early detection of PD. Therefore, its sensitive detection with fast and robust methods can improve its use as a biomarker. In this work we show the potentialities of label-free SERS spectroscopy in detecting CDA in aqueous solutions and artificial biofluids, with a simple, fast and sensitive approach. We present a detailed experimental SERS band assignment of CDA employing silver nanoparticle (AgNP) substrates in aqueous media, which was supported by theoretical calculations and simulated Raman and SERS spectra. The tentative orientation of CDA over the AgNP was also studied, indicating that catechol and carboxylic acid play a key role in the metallic surface adsorption. Moreover, we showed that SERS can allow us to identify CDA in aqueous media at low concentration, leading to the identification of some of its characteristic bands in pure water and in synthetic cerebrospinal fluid (SCSF) below 1 × 10^-8 M, while its band identification in simulated urine (SUR) can be reached at 1 × 10^-7 M. In conclusion, we show that CDA can be suitably detected by means of label-free SERS spectroscopy, which can significantly improve its sensitive detection for further analytical studies as a novel biomarker and further clinical diagnosis in PD patients.

Theoretical and Cyclic Voltammetric Analysis of Asparagine and Glutamine Electrocatalytic Activities for Dopamine Sensing Applications

The molecular dynamics and density functional theory (DFT) can be applied to discriminate electrocatalyst’s electron transfer (ET) properties. It will be interesting to discriminate the ET properties of green electrocatalysts such as amino acids. Here, we have used DFT to compare the electrocatalytic abilities of asparagine and glutamine at the carbon paste electrode interface. Cyclic voltammetric results reveal that the electrocatalytic activities of aspargine are higher than glutamine for dopamine sensing. Dopamine requires less energy to bind with asparagine when compared to glutamine. Additionally, asparagine has higher electron-donating and accepting powers. Therefore, asparagine has a higher electrocatalytic activity than glutamine—the ability for the asparagine and glutamine carbon electrodes to detect dopamine in commercial injection, and to obtain satisfactory results. As a part of the work, we have also studied dopamine interaction with the modified carbon surface using molecular dynamics.

Graphene oxide reinforced silk fibroin nanocomposite as an electroactive interface for the estimation of dopamine

The fabrication of 2D materials and polymer-based nanocomposites deposited on flexible conductive interfaces has unblocked new horizons to expedite reaction kinetics for developing highly selective and sensitive electrochemical biosensors. Herein, we developed a novel biosensing platform, comprising graphene oxide and a silk fibroin-based nanocomposite, drop-cast on a carbon cloth electrode. The fabricated interface was expected to be a robust and miniaturized sensing platform for precise detection of dopamine (DA). Characterization was performed by SEM, EDX, FTIR, XRD, UV-visible spectroscopy, contact angle measurement, fluorescence spectroscopy, particle size, and zeta potential analysis. CV, EIS, DPV, and chronoamperometry demonstrated the superior electrochemical properties of the working interface and revealed its enhanced active surface area, increased conductivity, and accelerated electron transfer rate. The designed interface exhibited low LoD (0.41 μM), admirable stability, good sensitivity (2.46 μA μM^-1 cm^-2), wide linearity ranging from 100-900 μM, excellent reproducibility, and superb selectivity against dopamine even in the presence of possible interfering analytes. These findings endorse the feasibility of the practical execution of such an integrated system in real sample analysis.

Core-shell Au-Ag nanoparticles as colorimetric sensing probes for highly selective detection of a dopamine neurotransmitter under different pH conditions

Dopamine (DA) is a vital biomarker for the early diagnosis of dopaminergic dysfunction; therefore, it is important to establish a direct and selective detection tool for DA neurotransmitters. This work reports facilely synthesized Au-Ag core-shell nanoparticles (Au@Ag NPs) as colorimetric sensing probes for highly selective detection of the DA neurotransmitter. Our sensing strategy is based on DA-mediated aggregation of the Au@Ag NPs, which can show a distinct color transition from yellow to greenish grey. With the increase of pH from 6 to 10, the response time of colorimetric transition was significantly reduced by a factor of 10 and the limit of detection (LOD) for DA by a spectroscopic device was estimated to be 0.08 μM. Notably, optimized sensing probes of Au@Ag NPs at pH 10 demonstrated an excellent selectivity to DA against various interfering components (including catecholamines (norepinephrine and epinephrine), lysine, glutamic acid, glucose, or metal ions). Our sensing system also exhibited the reliable detection of DA in spiked human serum with the relative standard deviation lower than 4.0%, suggesting its possible application to the direct detection of DA in biological fluids.

Curcumin-PLGA based nanocapsule for the fluorescence spectroscopic detection of dopamine

The main purpose of this paper is to design curcumin loaded PLGA nanocapsules for the selective detection of dopamine using fluorescence spectroscopy. In the present work curcumin loaded PLGA nanocapsules were synthesized using a solid-in-oil-in water (s/o/w) emulsion technique. The prepared nanocapsules were coated with a poly(diallyldimethylammonium)chloride (PDDA) polymer to increase the entrapment of curcumin into the core of PLGA polymer. PLGA-Cur-PDDA nanocapsules were characterized using different microscopic and spectroscopic techniques. Unlike free curcumin, the formed CUR-PLGA-PDDA NCs were established as nanoprobes for the selective detection of dopamine molecules. The selectivity and specificity of nanocapsules toward dopamine was achieved by measuring the fluorescence emission spectra of the NCs in the presence of other interference molecules such as tryptophan, melamine, adenine, etc. It was noticed that increasing the concentration of the different molecules had no significant change in the fluorescence signal of the nanocapsules. These results confirm the strong quenching between dopamine and curcumin in the nanocapsules. Hence, this fluorescence emission technique was found to be selective, easy and fast with low cost for the determination of dopamine in a concentration range up to 5 mM with a detection limit equal to 22 nM.

Multiplexed Monitoring of Neurochemicals via Electrografting-Enabled Site-Selective Functionalization of Aptamers on Field-Effect Transistors

Neurochemical corelease has received much attention in understanding brain activity and cognition. Despite many attempts, the multiplexed monitoring of coreleased neurochemicals with spatiotemporal precision and minimal crosstalk using existing methods remains challenging. Here, we report a soft neural probe for multiplexed neurochemical monitoring via the electrografting-assisted site-selective functionalization of aptamers on graphene field-effect transistors (G-FETs). The neural probes possess excellent flexibility, ultralight mass (28 mg), and a nearly cellular-scale dimension of 50 μm × 50 μm for each G-FET. As a demonstration, we show that G-FETs with electrochemically grafted molecular linkers (-COOH or -NH₂) and specific aptamers can be used to monitor serotonin and dopamine with high sensitivity (limit of detection: 10 pM) and selectivity (dopamine sensor >22-fold over norepinephrine; serotonin sensor >17-fold over dopamine). In addition, we demonstrate the feasibility of the simultaneous monitoring of dopamine and serotonin in a single neural probe with minimal crosstalk and interferences in phosphate-buffered saline, artificial cerebrospinal fluid, and harvested mouse brain tissues. The stability studies show that multiplexed neural probes maintain the capability for simultaneously monitoring dopamine and serotonin with minimal crosstalk after incubating in rat cerebrospinal fluid for 96 h, although a reduced sensor response at high concentrations is observed. Ex vivo studies in harvested mice brains suggest potential applications in monitoring the evoked release of dopamine and serotonin. The developed multiplexed detection methodology can also be adapted for monitoring other neurochemicals, such as metabolites and neuropeptides, by simply replacing the aptamers functionalized on the G-FETs.

Recent advances in colorimetry/fluorimetry-based dual-modal sensing technologies

Tailored to the increasing demands for sensing technologies, the fabrication of dual-modal sensing technologies through combining two signal transduction channels into one method has been proposed and drawn considerable attention. The integration of two sensing signals not only promotes the analytical efficiency with reduced assumption, but also improves the analytical performances with enlarged detection linear range, enhanced accuracy, and boosted application flexibility. The two top-rated output signals for developing dual-modal sensors are colorimetric and fluorescent signals because of their outstanding merits for point of care applications and real-time sensitive sensing. Given the rapid development of material chemistry and nanotechnology, the recent decade has witnessed great advance in colorimetric/fluorimetric signal based dual-modal sensing technologies. The new sensing strategy leads to a broad avenue for various applications in disease diagnosis, environmental monitoring and food safety because of the complementary and synergistic effects of the two output signals. In this state-of-the-art review, we comprehensively summarize different types of colorimetric/fluorimetric dual-modal sensing methods by highlighting representative research in the last 5 years, digging into their sensing methodologies, particularly the working principles of the signal transduction systems. Then, the challenges and future prospects for boosting further development of this research field are discussed.

Next-Generation Diamond Electrodes for Neurochemical Sensing: Challenges and Opportunities

Carbon-based electrodes combined with fast-scan cyclic voltammetry (FSCV) enable neurochemical sensing with high spatiotemporal resolution and sensitivity. While their attractive electrochemical and conductive properties have established a long history of use in the detection of neurotransmitters both in vitro and in vivo, carbon fiber microelectrodes (CFMEs) also have limitations in their fabrication, flexibility, and chronic stability. Diamond is a form of carbon with a more rigid bonding structure (sp3-hybridized) which can become conductive when boron-doped. Boron-doped diamond (BDD) is characterized by an extremely wide potential window, low background current, and good biocompatibility. Additionally, methods for processing and patterning diamond allow for high-throughput batch fabrication and customization of electrode arrays with unique architectures. While tradeoffs in sensitivity can undermine the advantages of BDD as a neurochemical sensor, there are numerous untapped opportunities to further improve performance, including anodic pretreatment, or optimization of the FSCV waveform, instrumentation, sp2/sp3 character, doping, surface characteristics, and signal processing. Here, we review the state-of-the-art in diamond electrodes for neurochemical sensing and discuss potential opportunities for future advancements of the technology. We highlight our team's progress with the development of an all-diamond fiber ultramicroelectrode as a novel approach to advance the performance and applications of diamond-based neurochemical sensors.

Chemometrics-assisted simultaneous voltammetric determination of multiple neurotransmitters in human serum

An electrochemical method combining chemometrics was developed for simultaneous quantification of multiple neurotransmitters including Dopamine (DA), Epinephrine (EP), Norepinephrine (NE) and serotonin (5-hydroxytryptamine, 5-HT) in human blood serum. A reduced graphene oxide modified glassy carbon electrode (RGO/GCE) was prepared via electrodeposition method. Differential pulse voltammetry (DPV) measurement of the four neurotransmitters showed that the voltammetric signals of the four targets overlapped significantly. To facilitate the simultaneous determination of the neurotransmitters, a chemometric tool of Tchebichef curve moment (TcM) method was proposed. The TcMs calculated from the voltammograms were used to establish the quantitative models by stepwise regression. The intra-day and inter-day precisions of the proposed method were less than 3.5% and 8.1%, respectively, and the recoveries were from 87.4% to 124%. The limit of detection (LOD) for DA, EP, NE and 5-HT were 74 nM, 104 nM, 84 nM and 97 nM, respectively. The above results indicated that the proposed approach is simple and reliable for the simultaneous determination of multiple neurotransmitters in human serum.

The effect of pH and transition metal ions on cysteine-assisted gold aggregation for a distinct colorimetric response

Colorimetric detection is a promising sensing strategy that is applicable to qualitative and quantitative determination of an analyte by monitoring visually detectable color changes with the naked eye. This study explored the cysteine (Cys)-induced aggregation of gold nanoparticles (AuNPs) in order to develop a sensitive colorimetric detection method for Cys. For this purpose, we systematically investigated the colorimetric response of AuNPs to Cys with varying particle sizes and concentrations. The AuNPs with various diameters ranging from 26.5 nm to 58.2 nm were synthesized by the citrate reduction method. When dispersed in water to have the same surface area per unit volume, the smaller AuNPs (26.5 nm) exhibited a more sensitive response to Cys compared to a larger counterpart (46.3 nm). We also examined the effect of divalent first-row transition metal ions (Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) on the Cys-induced aggregation of AuNPs. Among the tested metal ions, the addition of Cu²⁺ provided the highest enhancement in sensitivity to Cys regardless of pH between 3.5 and 7. The significant increase in the sensitivity caused by Cu²⁺ could be attributed to the capability of Cu²⁺ to form a highly stable chelate complex with surface-immobilized Cys, facilitating the aggregation of AuNPs. For the AuNPs–Cu²⁺ system at pH 7, the detection limit for Cys was determined to be 5 nM using UV-vis spectroscopy. The reported strategy showed the potential to be used for a rapid and sensitive detection of Cys and also metal ions that can facilitate Cys-mediated aggregation of AuNPs.

Divalent transition metal ions facilitated the aggregation of gold nanoparticles: Fe²⁺ < Ni²⁺ < Zn²⁺ < Co²⁺ ≪ Mn²⁺ < Cu²⁺ at pH 7. The optimized AuNPs-Cu²⁺ system produced the progressive color change upon the addition of cysteine (0.2–2.0 μM).

Carbon dots-based dual-emission ratiometric fluorescence sensor for dopamine detection

The detection of Dopamine (DA) is significant for disease surveillance and prevention. However, the development of the precise and simple detection techniques is still at a preliminary stage due to their high tester requirements, time-consuming process, and low accuracy. In this work, we present a novel dual-emission ratiometric fluorescence sensing system based on a hybrid of carbon dots (CDs) and 7-amino-4-methylcoumarin (AMC) to quickly monitor the DA concentration. Linked via amide bonds, the CDs and AMC offered dual-emissions with peaks located at 455 and 505 nm, respectively, under a single excitation wavelength of 300 nm. Attributed to the fluorescence of the CDs and AMC in the nanohybrid system can be quenched by DA, the concentration of DA could be quantitatively detected by monitoring the ratiometric ratio change in fluorescent intensity. More importantly, the CDs-AMC-based dual-emission ratiometric fluorescence sensing system demonstrated a remarkable linear relationship in the range of 0-33.6 μM to detection of DA, and a low detection limit of 5.67 nM. Additionally, this sensor successfully applied to the detection of DA in real samples. Therefore, the ratiometric fluorescence sensing system may become promising to find potential applications in biomedical dopamine detection.

Material-Selective Polydopamine Coating in Dimethyl Sulfoxide

Polydopamine coating is known to be performed in a material-independent manner and has become a popular tool when designing a surface-functionalization strategy of a given material. Studies to improve polydopamine coatings have been reported, aiming to reduce the coating time (by transition metals, oxidants, applied voltages, or microwave irradiation), control surface roughness using catechol derivatives, and vary the ad-layer molecules formed on an underlying polydopamine layer. However, none of the techniques have changed the most important intrinsic property of polydopamine, the surface-independent coating. Currently, no method has been reported to modify this property to create a material-selective 'smart' polydopamine coating. Herein, we report a method with polydopamine to differentiate the chemistry of surfaces. We found that the polydopamine coating was largely inhibited on silicon-containing surfaces such as Si wafers and quartz crystals in a dimethyl sulfoxide (DMSO)/phosphate-buffered saline (PBS) cosolvent, while the coating properties on other materials remained mostly unchanged. Among the various interface bonding mechanisms of coordination, namely, cation-π, π-π stacking, and hydrogen-bonding interactions, the DMSO/PBS cosolvent effectively inhibits hydrogen-bond formation between catechol and SiO₂, resulting in surface-selective 'smart' polydopamine coatings. The new polydopamine coating is useful for functionalizing patterned surfaces such as Au patterns on SiO₂ substrates. Considering that Si wafer is the most widely used substrate, the surface-selective polydopamine coating technique described herein opens up a new direction in surface functionalization and interface chemistry.

Colorimetric Detection of Dopamine with J-Aggregate Nanotube-Integrated Hydrogel Thin Films

The deficiency of dopamine (DA) is clinically linked to several neurological diseases. The detection of urinary DA provides a noninvasive method for diagnosing these diseases and monitoring therapies. In this paper, we report the coassembly of lithocholic acid (LCA) and 3,3'-diethythiadicarbocyanine iodide (DiSC₂(5)) at the equimolar ratio in ammonia solution into J-aggregate nanotubes. By integrating the J-aggregate nanotubes into transparent agarose hydrogel films formed on the wall of quartz cuvettes, we fabricate a portable and reproducible sensor platform for the optical detection of DA in synthetic urine. The J-band intensity of the integrated J-aggregate nanotubes is found to linearly decrease with the increase of DA concentrations from 10 to 80 nM, giving the limit of detection of ∼7 nM. The detection mechanism is based on the photoinduced electron transfer (PET) from the excited J-aggregate nanotubes to adsorbed DA-quinone. The PET process used in the sensor platform can reduce the interference of ascorbic acid and uric acid in the detection of DA in synthetic urine. The high sensitivity of the sensor platform is contributed by the delocalized exciton of J-aggregate nanotubes.

Dopamine and Melamine Binding to Gold Nanoparticles Dominates Their Aptamer-Based Label-Free Colorimetric Sensing

Target-directed aptamer adsorption by gold nanoparticles (AuNPs) has been widely used to develop label-free colorimetric biosensors. However, the potential interactions between target molecules and AuNPs have not been considered, which may lead to misinterpretation of analytical results. In this work, the detection of dopamine, melamine, and K⁺ was studied as model systems to address this problem. First, dopamine and two control molecules all induced the aggregation of citrate-capped AuNPs with apparent K_d's of 5.8 μM dopamine, 51.6 μM norepinephrine, and 142 μM tyramine. Isothermal titration calorimetry measured the aptamer K_d to be 1.9 μM dopamine and 16.8 μM norepinephrine, whereas tyramine cannot bind. Surface enhanced Raman spectroscopy confirmed direct adsorption of dopamine, and the adsorbed dopamine inhibited the adsorption of DNA. Using a typical salt-induced colorimetric detection protocol, a similar color response was observed regardless of the sequence of DNA, indicating the observed color change reflected the adsorption of dopamine by the AuNPs instead of the binding of dopamine by the aptamer. For this label-free sensor to work, the interaction between the target molecule and AuNPs should be very weak, while dopamine represents an example of strong interactions. For the other two systems, the melamine detection did not reflect aptamer binding either but the K⁺ detection did, suggesting melamine also strongly interacted with AuNPs, whereas K⁺ had very weak interactions with AuNPs. Since each target molecule is different, such target/AuNP interactions need to be studied case-by-case to ensure the sensing mechanism.

Enhanced LSPR performance of graphene nanoribbons-silver nanoparticles hybrid as a colorimetric sensor for sequential detection of dopamine and glutathione

In the present study, a novel plasmonic sensing platform was proposed for sequential colorimetric detection of dopamine (DA) and glutathione (GSH) in human serum sample by taking advantage of plasmon hybridization in graphene nanoribbons/sliver nanoparticles (GNR/Ag NPs) hybrid. DA was detected based on etching strategy and morphology transition of label-free Ag NPs hybridized with GNR. As a result of the etching process, hexagonal Ag NPs were changed to smaller corner-truncated nanoparticles and a blue shift was observed in its plasmonic band, accompanied by the color change from green to red. Sequentially, GSH induced aggregation of Ag NPs which resulted in a decrease in absorption intensity of Ag NPs plasmonic band and a color change from red to gray. By employing GNR/Ag NPs hybrid as a sensitive colorimetric sensor, DA and GSH were successfully detected in low concentrations of 0.04 μM and 0.23 μM, respectively. The same experiment was carried out in the absence of GNR and the detection limits were obtained 0.46 and 1.2 μM for DA and GSH, respectively. These results confirmed the effective role of GNR on the sensitivity improvement of GNR/Ag NPs hybrid. The proposed simple and sensitive sensing approach offered a beneficial and promising platform for sequential detection of DA and GSH in the biological samples.

Highly fluorescent oligodopamine (F-ODA) for accurate and sensitive detection of the neurotransmitter dopamine

Dopamine (DA) is an important neurotransmitter for regulating the central nervous system, hormones, and cardiovascular system. Fluorescence technique is usually applied for the rapid detection of DA neurotransmitter because DA is easily converted to fluorescent products under alkaline condition. However, it is difficult to accurately quantify low levels of DA (<10 nM) because the final product of DA conversion, so-called polydopamine (PDA), usually have low fluorescence efficiency. In this study, DA dissolved in Tris-EDTA buffer (pH 8.5) was oxidized and polymerized by adding NaOH as an oxidizing agent. After obtaining products with various degrees of polymerization, the fluorescent oligodopamine (F-ODA) (i.e., indole-5,6-quinone-rich compounds) was separated from non-fluorescent polydopamine (PDA) products. After removing non-fluorescent PDA by centrifugation, the F-ODA in the supernatant exhibited high FL intensity at 470 nm under excitation at 360 nm. At the optimal reaction conditions, the standard curve of the F-ODA exhibited a good linearity over wide range of DA concentration from 1 μM to 1 nM (limit of detection = ~0.1 nM), suggesting a very useful analytical tool for the accurate and sensitive detection of the neurotransmitter DA in bio-fluid.

Recent Advances in Electrochemical and Optical Sensing of Dopamine

Nowadays, several neurological disorders and neurocrine tumours are associated with dopamine (DA) concentrations in various biological fluids. Highly accurate and ultrasensitive detection of DA levels in different biological samples in real-time can change and improve the quality of a patient's life in addition to reducing the treatment cost. Therefore, the design and development of diagnostic tool for in vivo and in vitro monitoring of DA is of considerable clinical and pharmacological importance. In recent decades, a large number of techniques have been established for DA detection, including chromatography coupled to mass spectrometry, spectroscopic approaches, and electrochemical (EC) methods. These methods are effective, but most of them still have some drawbacks such as consuming time, effort, and money. Added to that, sometimes they need complex procedures to obtain good sensitivity and suffer from low selectivity due to interference from other biological species such as uric acid (UA) and ascorbic acid (AA). Advanced materials can offer remarkable opportunities to overcome drawbacks in conventional DA sensors. This review aims to explain challenges related to DA detection using different techniques, and to summarize and highlight recent advancements in materials used and approaches applied for several sensor surface modification for the monitoring of DA. Also, it focuses on the analytical features of the EC and optical-based sensing techniques available.

Noble Metal Nanostructured Materials for Chemical and Biosensing Systems

Nanomaterials with unique physical and chemical properties have attracted extensive attention of scientific research and will play an increasingly important role in the future development of science and technology. With the gradual deepening of research, noble metal nanomaterials have been applied in the fields of new energy materials, photoelectric information storage, and nano-enhanced catalysis due to their unique optical, electrical and catalytic properties. Nanostructured materials formed by noble metal elements (Au, Ag, etc.) exhibit remarkable photoelectric properties, good stability and low biotoxicity, which received extensive attention in chemical and biological sensing field and achieved significant research progress. In this paper, the research on the synthesis, modification and sensing application of the existing noble metal nanomaterials is reviewed in detail, which provides a theoretical guidance for further research on the functional properties of such nanostructured materials and their applications of other nanofields.

Redox-modulated colorimetric detection of ascorbic acid and alkaline phosphatase activity with gold nanoparticles

Gold nanoparticles (AuNPs) exhibit characteristic absorption peaks in the ultraviolet visible region due to their special surface plasmon resonance effect. This characteristic absorption peak would change with the relative colour varying from wine red to orange-yellow upon sequential addition of ascorbic acid (AA) into the mixture of AuNPs and Ag(I). Similar observations also could be found when the hydrolysis product of sodium l-ascorbyl-2-phosphate with alkaline phosphatase (ALP) was used as an alternative to AA. Results of structure characterization confirmed that the phenomena were due to the reduction of Ag(I) to Ag(0) on the surface of AuNPs and the formation of core-shell AuNPs@Ag. Therefore, a colorimetric assay for rapid visual detection of AA and ALP based on redox-modulated silver deposition on AuNPs has been proposed. Under the optimal experimental conditions, the absorbance variation ΔA_{522 nm} /A_{370 nm} of AuNPs was proportional to the concentration of AA (5-60 μmol/L) and ALP (3-18 U/L) with the corresponding detection limit of 2.44 μmol/L for AA and 0.52 U/L for ALP. The assay showed excellent selectivity towards AA and ALP. Moreover, the assay has been applied to detect AA and ALP activity in real samples with satisfying results.

Optical nanoprobes for chiral discrimination

Chiral recognition can be achieved by exploiting chiral properties of nanoparticles within various colorimetric and luminescent sensing systems.

Synthesis of a manganese dioxide nanorod-anchored graphene oxide composite for highly sensitive electrochemical sensing of dopamine

A novel manganese dioxide nanorod-anchored graphene oxide (MnO₂ NRs/GO) composite was synthesized by a simple hydrothermal method for the development of a highly sensitive electrochemical sensor for dopamine.

The fabrication of a gold nanoelectrode–nanopore nanopipette for dopamine enrichment and multimode detection

It is important to further improve the electrophysiology and electrochemistry techniques of neurotransmitter detection.

Sensitive Multicolor Visual Detection of Exosomes via Dual Signal Amplification Strategy of Enzyme-Catalyzed Metallization of Au Nanorods and Hybridization Chain Reaction

Exosomes as nanosized vesicles have been recognized as potential noninvasive biomarkers for early cancer diagnosis. Herein, we presented a sensitive multicolor visual method for exosome detection based on enzyme-induced silver deposition on gold nanorods (Au NRs). To achieve highly sensitive determination of exosomes, hybridization chain reaction (HCR) was employed to introduce more alkaline phosphatase (ALP) for signal amplification. First, exosomes were captured by magnetic bead-labeled CD63 aptamer, and, then, cholesterol-modified DNA probes were spontaneously inserted into the exosomal lipid membrane. The ends of the DNA probes act as the initiator to trigger the HCR for signal amplification. Finally, with the help of HCR, increased sites led to enhanced ALP loading and thus boosted the ascorbic acid generation. Silver ions were reduced by ascorbic acid, and silver shells were formed on Au NRs, giving rise to the blue shift of the longitudinal localized surface plasmon resonance peak. Correspondingly, the concentration of exosomes can be obviously distinguished with naked eyes via the vivid color variation. Due to the dual signal amplification of HCR and metallization of Au NRs, highly sensitive detection for exosomes were realized with detection limits as low as 1.6 × 10² particles/μL by UV-vis spectroscopy and 9 × 10³ particles/μL by naked eyes. Compared to the reported colorimetric methods for exosome quantification, visualization based on plentiful color tonalities is the most captivating merit of our approach, and HCR-induced signal amplification highlights the virtue of the strategy. The applicability of the method was validated by the analysis of clinical samples.

A Review of Neurotransmitters Sensing Methods for Neuro-Engineering Research

Neurotransmitters as electrochemical signaling molecules are essential for proper brain function and their dysfunction is involved in several mental disorders. Therefore, the accurate detection and monitoring of these substances are crucial in brain studies. Neurotransmitters are present in the nervous system at very low concentrations, and they mixed with many other biochemical molecules and minerals, thus making their selective detection and measurement difficult. Although numerous techniques to do so have been proposed in the literature, neurotransmitter monitoring in the brain is still a challenge and the subject of ongoing research. This article reviews the current advances and trends in neurotransmitters detection techniques, including in vivo sampling and imaging techniques, electrochemical and nano-object sensing techniques for in vitro and in vivo detection, as well as spectrometric, analytical and derivatization-based methods mainly used for in vitro research. The document analyzes the strengths and weaknesses of each method, with the aim to offer selection guidelines for neuro-engineering research.

Gold nanoparticle-based detection of dopamine based on fluorescence resonance energy transfer between a 4-(4-dialkylaminostyryl)pyridinium derived fluorophore and citrate-capped gold nanoparticles

A colorimetric/fluorometric dual-signal assay is described for the determination of dopamine (DA). A nanoprobe was obtained by linking a 4-(4-dialkylaminostyryl)pyridinium derived fluorophore to citrate-capped gold nanoparticles (AuNPs). The fluorescence of the fluorophore is quenched by the AuNPs via fluorescence resonance energy transfe. In the presence of DA, the catechol group of DA can absorb on the surface of AuNPs to induce aggregation, which is accompanied by a color change from red to blue. The yellow fluorescence of the fluorophore with excitation/emission maximum at 365/570 nm is recovered. The dual-signal detection allows the quantitative analysis of DA within 300 μM by the colorimetric method and 80 μM by the fluorometric method. The detection limits for the colorimetric/fluorometric methods are 1.85 μM and 0.29 μM, respectively. Quantitative determination of DA in spiked urine samples was successfully demonstrated, with recoveries ranging from 98.2 to 106.0%. Graphical abstract A colorimetric/fluorometric dual-signal assay is described for the determination of dopamine by linking a fluorophore to gold nanoparticles. The dopamine causes aggregation of the nanoparticles to induce color change, which is followed by the recovery of the fluorescence.

ThThnated Development of a pH assisted AgNP-based colorimetric sensor Array for simultaneous identification of phosalone and azinphosmethyl pesticides

Development of simple and rapid methods for identification of pesticides, due to their broad usage and harmful effects on mammals, has been known as a critical demand. Herein, we have introduced a silver nanoparticle (AgNP) based colorimetric sensor array for simultaneous identification of Azinphosmethyl (AM) and Phosalone (PS) pesticides. In the presence of the target pesticides, unmodified AgNPs at various pHs (4.5, 5.5 and 9.5) showed different aggregation behaviors. As a result of aggregation, the color and UV-Vis spectra of AgNPs changed differentially, leading to distinct response patterns for AM and PS. The aggregation induced spectral changes of AgNPs, were used to identify AM and PS with the help of linear discriminant analysis (LDA). The applicability of the proposed sensor array was then evaluated by identifying the target pesticides in apple samples. Altogether, the developed AgNPs based colorimetric sensor array can be potentially exploited as an efficient discrimination tool in the near future for agrichemical applications.

Preparation of functionalized double ratio fluorescent imprinted sensors for visual determination and recognition of dopamine in human serum

Ratiometric fluorescent sensors have shown great prospect in chemical monitoring and recognition due to its high intuitiveness, accurateness, and visualization. In this work, the ratiometric fluorescent sensors, which includes a blue fluorescent Carbon quantum dots (CQDs) as internal standard material, and a red fluorescent boric acid-modified CdTe QDs as response signal. Then we choose dopamine (DA) as template, 3-phenylboronic acid (APBA) for functional monomers, tetraethyl orthosilicate (TEOS) for cross-linker to synthesize double ratio molecularly imprinted polymers (DR-MIPs) that can identify dopamine selectively and sensitively. The DR-MIPs has better capability of selective recognition, obvious anti-ion interference, rapid detection and good visualization. Furthermore, the unique DR-MIPs was proved as efficient visual sensors for determination of DA in human serum rapidly and efficiently. The DR-MIPs still displayed well accuracy, and the potential prospects of this smart sensor is clearly demonstrated in the context of modern clinical medicine.

Multiply clustered gold-based nanoparticles complexed with exogenous pDNA achieve prolonged gene expression in stem cells

Development of a stable and prolonged gene delivery system is a key goal in the gene therapy field. To this end, we designed and fabricated a gene delivery system based on multiply-clustered gold particles that could achieve prolonged gene delivery in stem cells, leading to improved induction of differentiation.

Methods: Inorganic gold nanoparticles (AuNPs) underwent three rounds of complexation with catechol-functionalized polyethyleneimine (CPEI) and plasmid DNAs (pDNAs), in that order, with addition of heparin (HP) between rounds, yielding multiply-clustered gold-based nanoparticles (mCGNPs). Via metal-catechol group interactions, the AuNP surface was easily coordinated with positively charged CPEIs, which in turn allowed binding of pDNAs.

Results: Negatively charged HP was encapsulated with the positive charge of CPEIs via electrostatic interactions, making the NPs more compact. Repeating the complexation process yielded mCGNPs with improved transfection efficiency in human mesenchymal stem cells (hMSCs); moreover, these particles exhibited lower cytotoxicity and longer expression of pDNAs than conventional NPs. This design was applied to induction of chondrogenesis in hMSCs using pDNA harboring SOX9, an important chondrogenic transcription factor. Prolonged expression of SOX9 induced by mCGNPs triggered expression of chondrocyte extracellular matrix (ECM) protein after 14 days, leading to more efficient chondrogenic differentiation in vitro and in vivo.

Plasma functional polymerization of dopamine using atmospheric pressure plasma and a dopamine solution mist

By using DBD-type atmospheric pressure plasmas and a dopamine solution mist formed by a piezoelectric module, the possibility of depositing functional polymer films showing the physical and chemical characteristics of polydopamine without breaking the functional group of the dopamine has been investigated for different plasma voltages. The higher DBD voltages up to 3.0 kV decreased the functional groups such as catechol and amine (N/C ratio) relative to dopamine in the deposited polymer by increasing the dissociation of dopamine into atoms and small molecules due to higher electron energies. In contrast, the lower DBD voltages up to 1.5 kV increased the functional group and N/C ratio of dopamine in the deposited polymer by keeping the molecular structures of the dopamine due to lower electron energies. Therefore, the polymer deposited at the lower DBD voltages showed lower contact angles and higher metal absorption properties which are some of the surface modification characteristics of polydopamine. When the metal absorption properties of the polydopamine-like film deposited using the atmospheric pressure plasma of a low DBD voltage with a dopamine solution mist were compared with other metal absorbers for Cu, As, and Cr, the polydopamine-like film exhibited superior metal absorption properties. It is believed that this atmospheric pressure plasma process can be also applied to the plasma polymerization of other monomers without breaking the functional groups of the monomers.

Competitive method for fluorescent dopamine detection in cerebrospinal fluid based on the peroxidase-like activity of ficin

Dopamine (DA), a catecholamine neurotransmitter, is considered to be an important indicator for mental diseases detection in the clinic. In this study, a novel fluorescent sensing platform consisting of the ficin-H₂O₂-tyramine system for determining DA in cerebrospinal fluids (CSF) was established. The proposed method is based on the fact that ficin, a mimetic peroxidase, can catalyze H₂O₂ decomposition into OH radicals, which can oxidize non-fluorescent tyramine into fluorescent dityramine. When DA was introduced, DA can compete with tyramine for OH and resulting in the oxidation reaction of tyramine inhibited along with the fluorescence intensity of the system decreased, which provides a unique strategy for fluorescence detection of DA. Under optimal conditions, the fluorescence intensity decreased linearly with the DA level over a wide concentration range from 0.05 to 12.0 μM (R² = 0.995) with a detection limit of 46 nM (3σ/k). More importantly, the proposed sensing approach exhibits high sensitivity, good selectivity and has been successfully applied to DA sensing in complex biological samples, which made it hold great potential for DA determination in chemical and biological analytical applications.

A Colorimetric Sensor for Dopamine Detection Based on Peroxidase-like Activity of Ce2(MoO4)3 Nanoplates

Introduction:

Artificial enzyme mimics are materials with similar catalytic function of natural enzymes. Among several types of artificial enzymes, nanomaterial-based products or nanozymes have been of particular interest to researchers.

Materials and Methods:

In this work, Ce2(MoO4)3 nanoplates were synthesized via a one-pot hydrothermal approach. SEM and EDS characterizations show a plated-like architecture with high purity. These nanoplates are shown to have an intrinsic peroxidase-mimetic activity. In the presence of H2O2, Ce2(MoO4)3 nanoplates could catalyse the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) with high performance to produce a blue dye (with an absorbance maximum at 652 nm). Dopamine (DA) has some reducibility due to the phenol hydroxyl group, which results in using H2O2 and causing the blue shallowing of the reaction solution by inhibiting the reaction between H2O2 and TMB. Based on that, a visual, sensitive and simple colorimetric method using Ce2(MoO4)3 nanoplates as peroxidase mimics was developed for detecting DA.

Results and Conclusions:

Suitable linear relationship for DA was obtained from 0.1 to 10 µM. The limit of detection (LOD) of the proposed method was calculated as 0.05 µM and the relative standard deviation (RSD) was less than 4.0%. The proposed method was successfully applied to DA detection in human serum sample.