Micro-patterns of gold nanoparticles assembled by photovoltaic optoelectronic tweezers: application to plasmonic fluorescence enhancement

Noble metal nanostructures are well-known for their ability to increase the efficiency of different optical or physical phenomena due to their plasmonic behavior. This work presents a simple strategy to obtain Au plasmonic patterns by optically induced nanoparticle assembly and its application as fluorescence enhancement platforms. This strategy is based on the so-called photovoltaic optoelectronic tweezers (PVOT) being the first time they are used for fabricating Au periodic micro-patterns. Fringe patterns with a sub-structure of aggregates, assembled from individual spherical nanoparticles of 3.5 or 170 nm diameters, are successfully obtained. The spatial distribution of the aggregates is controlled with micrometric accuracy and the patterns can be arranged over large-scale active areas (tens of mm²). The outcome for the ultra-small (3.5 nm) particles is particularly relevant because this diameter is the smallest one manipulated by PVOT so far. Testing experiments of plasmonic fluorescence enhancement show that the 170-nm patterns present a much better plasmonic behavior. For the 170-nm platform they reveal a 10-fold enhancement factor in the fluorescence of Rhodamine-B dye molecules and a 3-fold one for tagged DNA biomolecules. Hence, the results suggest that these latter plasmonic platforms are good candidates for efficient bio-imaging and biosensing techniques, among other applications.

Evaporation in nano/molecular materials

Evaporation is a physical phenomenon with fundamental significance to both nature and technology ranging from plant transpiration to DNA engineering. Various analytical and empirical relationships have been proposed to characterize evaporation kinetics at macroscopic scales. However, theoretical models to describe the kinetics of evaporation from nano and sub-nanometer (molecular) confinements are absent. On the other hand, the fast advancements in technology concentrated on development of nano/molecular-scale devices demand appropriate models that can accurately predict physics of phase-change in these systems. A thorough understanding of the physics of evaporation in nano/molecular materials is, thus, of critical importance to develop the required models. This understanding is also crucial to explain the intriguing evaporation-related phenomena that only take place when the characteristic length of the system drops to several nanometers. Here, we comprehensively review the underlying physics of evaporation phenomenon and discuss the effects of nano/molecular confinement on evaporation. The role of liquid-wall interface-related phenomena including the effects of disjoining pressure and flow slippage on evaporation from nano/molecular confinements are discussed. Different driving forces that can induce evaporation in small confinements, such as heat transfer, pressure drop, cavitation and density fluctuations are elaborated. Hydrophobic confinement induced evaporation and its potential application for synthetic ion channels are discussed in detail. Evaporation of water as molecular clusters rather than isolated molecules is discussed. Despite the lack of experimental investigations on evaporation at nanoscale, there exist an extensive body of literature that have applied different simulation techniques to predict the phase change behavior of liquids in nanoconfinements. We infer that exploring the effect of electrostatic interactions and flow slippage to enhance evaporation from nanoconduits is an interesting topic for future endeavors. Further future studies could be devoted to developing nano/molecular channels with evaporation-based gating mechanism and utilization of 2D materials to tune energy barrier for evaporation leading to enhanced evaporation.

Evaporative Lithography in Open Microfluidic Channel Networks

We demonstrate a direct capillary-driven method based on wetting and evaporation of various suspensions to fabricate regular two-dimensional wires in an open microfluidic channel through continuous deposition of micro- or nanoparticles under evaporative lithography, akin to the coffee-ring effect. The suspension is gently placed in a loading reservoir connected to the main open microchannel groove on a PDMS substrate. Hydrophilic conditions ensure rapid spreading of the suspension from the loading reservoir to fill the entire channel length. Evaporation during the spreading and after the channel is full increases the particle concentration toward the end of the channel. This evaporation-induced convective transport brings particles from the loading reservoir toward the channel end where this flow deposits a continuous multilayered particle structure. The particle deposition front propagates backward over the entire channel length. The final dry deposit of the particles is thereby much thicker than the initial volume fraction of the suspension. The deposition depth is characterized using a 3D imaging profiler, whereas the deposition topography is revealed using a scanning electron microscope. The patterning technology described here is robust and passive and hence operates without an external field. This work may well become a launching pad to construct low-cost and large-scale thin optoelectronic films with variable thicknesses and interspacing distances.

Orientation of charged clay nanotubes in evaporating droplet meniscus

During drying, an aqueous suspension of strongly charged halloysite clay nanotubes concentrates at the edge of the droplet ("coffee-ring" effect) which provides alignment of the tubes along the liquid-substrate contact line. First, the surface charge of the nanotubes was enhanced by polyanion adsorption inside of the lumen to compensate for the internal positive charges. This increased the magnitude of the ξ-potential of the tubes from -36 to -81 mV and stabilized the colloids. Then, colloidal halloysite was dropped onto the substrate, dried at 65 °C and after a concentration of ∼0.05 mg mL(-1) was reached, the alignment of nanotubes occurred starting from the droplet edges. The process was described with Onsager's theory, in which longer nanorods, which have higher surface charge, give better ordering after a critical concentration is reached. This study indicates a new application of halloysite clay nanotubes in polymeric composites with anisotropic properties, microchannel orientation, and production of coatings with aligned nanotubes.

Porphyrin-based honeycomb films and their antibacterial activity

Micrometer-sized porous honeycomb-patterned thin films based on hybrid complexes formed via electrostatic interaction between Mn(III) meso-tetra(4-sulfonatophenyl) porphine chloride (an acid form, {MnTPPS}) and dimethyldioctadecylammonium bromide (DODMABr). The morphology of the microporous thin films can be well regulated by controlling the concentration of MnTPPS-DODMA complexes, DODMABr, and polystyrene (PS), respectively. The formation of the microporous thin films was largely influenced by different solvents. The well-ordered microporous films of MnTPPS-DODMA complexes exhibit a more efficient antibacterial activity under visible light than those of hybrid complexes of nanoparticles modified with DODMABr, implying that well-ordered microporous films containing porphyrin composition can improve photochemical activity and more dominance in applications in biological medicine fields.

A model for drying control cosolvent selection for spin-coating uniformity: the thin film limit

Striation defects in spin-coated thin films are a result of unfavorable capillary forces that develop due to the physical processes commonly involved in the spin-coating technique. Solvent evaporation during spinning causes slight compositional changes in the coating during drying, and these changes lead to instability in the surface tension, which causes lateral motions of the drying fluid up to the point where it gels and freezes in the thickness variations. In an earlier publication, we looked at the case where evaporation happens fast enough that the compositional depletion is mostly a surface effect. In terms of the mass transport rate competition within the coating solution, that work covered the thick film limit of this instability problem. However, in many cases, the coatings are thin enough or diffusion of solvent within the coating is fast enough to require a different solvent mixing strategy, which is developed here. A simple perturbation analysis of surface roughness is developed, and evaporation is allowed in the thin film limit. The perturbation analysis allows for a simple rubric to be laid out for cosolvent additions that can reduce the Marangoni effect during the later stages of coating deposition and drying when the thin film limit applies.

Spontaneous formation of linearly arranged microcraters on sol-gel-derived silica-poly(vinylpyrrolidone) hybrid films induced by Bénard-Marangoni convection

Complex, sophisticated surface patterns on micrometer and nanometer scales are obtained when solvent evaporates from solutions containing nonvolatile solutes dropped on a solid substrate. Such evaporation-driven pattern formation has been utilized as a fabrication process of highly ordered patterns in thin films. Here, we suggested the spontaneous pattern formation induced by Bénard-Marangoni convection triggered by solvent evaporation as a novel patterning process of sol-gel-derived organic-inorganic hybrid films. Microcraters of 1.0-1.5 μm in height and of 100-200 μm in width were spontaneously formed on the surface of silica-poly(vinylpyrrolidone) hybrid films prepared via temperature-controlled dip-coating process, where the surface patterns were linearly arranged parallel to the substrate withdrawal direction. Such highly ordered micropatterns were achieved by Bénard-Marangoni convection activated at high temperatures and the unidirectional flow of the coating solution on the substrate during dip-coating.