Multimodal coupling of optical transitions and plasmonic oscillations in rhodamine B modified gold nanoparticles

Towards High-Performance Photo-Fenton Degradation of Organic Pollutants with Magnetite-Silver Composites: Synthesis, Catalytic Reactions and In Situ Insights

In this study, Fe3O4/Ag magnetite-silver (MSx) nanocomposites were investigated as catalysts for advanced oxidation processes by coupling the plasmonic effect of silver nanoparticles and the ferromagnetism of iron oxide species. A surfactant-free co-precipitation synthesis method yielded pure Fe3O4 magnetite and four types of MSx nanocomposites. Their characterisation included structural, compositional, morphological and optical analyses, revealing Fe3O4 magnetite and Ag silver phases with particle sizes ranging from 15 to 40 nm, increasing with the silver content. The heterostructures with silver reduced magnetite particle aggregation, as confirmed by dynamic light scattering. The UV-Vis spectra showed that the Fe:Ag ratio strongly influenced the absorbance, with a strong absorption band around 400 nm due to the silver phase. The oxidation kinetics of organic pollutants, monitored by in situ luminescence measurements using rhodamine B as a model system, demonstrated the higher performance of the developed catalysts with increasing Ag content. The specific surface area measurements highlighted the importance of active sites in the synergistic catalytic activity of Fe3O4/Ag nanocomposites in the photo-Fenton reaction. Finally, the straightforward fabrication of diverse Fe3O4/Ag heterostructures combining magnetism and plasmonic effects opens up promising possibilities for heterogeneous catalysis and environmental remediation.

Fluorescent probes based on the core-shell structure of molecular imprinted materials and gold nanoparticles for highly selective glutathione detection

Glutathione (GSH) is a polypeptide with important physiological functions. Real-time and accurate detection of GSH is of great significance for clinical diagnosis, disease treatment and pathogen detection. A fluorescent nanosensor based on composite core-shell nanoparticles for the highly selective detection of GSH is reported. In the cores, the fluorescence of rhodamine b was quenched by using gold nanoparticles (AuNPs), and GSH could competitively combine with AuNPs to cause rhodamine b to fall off, thereby recovering the fluorescence. In the shell part, molecularly imprinted materials using oxidized glutathione (GSSG) as a pseudotemplate provide GSH/GSSG specific pores and improve the specificity and anti-interference ability of the sensor. The GSH sensor has a detection range of 0-100 μM and limit of detection (LOD) of 0.18 μM, and robust sensing performance in fetal bovine serum, indicating its great potential for clinical diagnosis.

A laser-driven optical atomizer: photothermal generation and transport of zeptoliter-droplets along a carbon nanotube deposited hollow optical fiber

From mechanical syringes to electric field-assisted injection devices, precise control of liquid droplet generation has been sought after, and the present state-of-the-art technologies have provided droplets ranging from nanoliter to subpicoliter volume sizes. In this study, we present a new laser-driven method to generate liquid droplets with a zeptoliter volume, breaking the fundamental limits of previous studies. We guided an infrared laser beam through a hollow optical fiber (HOF) with a ring core whose end facet was coated with single-walled carbon nanotubes. The laser light was absorbed by this nanotube film and efficiently generated a highly localized microring heat source. This evaporated the liquid inside the HOF, which rapidly recondensed into zeptoliter droplets in the surrounding air at room temperature. We spectroscopically confirmed the chemical structures of the liquid precursor maintained in the droplets by atomizing dye-dissolved glycerol. Moreover, we explain the fundamental physical principles as well as functionalities of the optical atomizer and perform a detailed characterization of the droplets. Our approach has strong prospects for nanoscale delivery of biochemical substances in minuscule zeptoliter volumes.

Cellulose Acetate-Based Plasmonic Crystals for Surface-Enhanced Raman and Fluorescence Spectroscopy

In order to meet environmental concerns, there is an increasing demand for biodegradable and sustainable materials in many areas, including photonics. Cellulose and its derivatives are potentially eco-friendly alternatives to conventional plastics, because of their abundance and lower environmental impact. Here, we report the fabrication of plasmonic structures by molding cellulose acetate into submicrometric periodic lattices, using soft lithography. The fabricated platforms can be used for the enhancement of Raman and fluorescence signals of a range of analytes including a model immunoassay utilizing a streptavidin-conjugated dye, which is characterized by a 23-fold enhancement in fluorescence signal intensity, which shows the potential of the platform to be further used for the assay-based development of diagnostic tools.

Impact of atomic layer deposited TiO2 on the photocatalytic efficiency of TiO2/w-VA-CNT nanocomposite materials

Titanium oxide (TiO₂) has been widely investigated as a photocatalytic material, and the fact that its performance depends on its crystalline structure motivates further research on the relationship between preparation methods and material properties. In this work, TiO₂ thin films were grown on non-functionalized wave-like patterned vertically aligned carbon nanotubes (w-VA-CNTs) via the atomic layer deposition (ALD) technique. Grazing incidence X-ray diffraction (GIXRD) analysis revealed that the structure of the TiO₂/VA-CNT nanocomposites varied from amorphous to a crystalline phase with increasing deposition temperature, suggesting a “critical deposition temperature” for the anatase crystalline phase formation. On the other hand, scanning transmission electron microscopy (STEM) studies revealed that the non-functionalized carbon nanotubes were conformally and homogeneously coated with TiO₂, forming a nanocomposite while preserving the morphology of the nanotubes. X-ray photoelectron spectroscopy (XPS) provided information about the surface chemistry and stoichiometry of TiO₂. The photodegradation experiments under ultraviolet (UV) light on a model pollutant (Rhodamine B, RhB) revealed that the nanocomposite comprised of anatase crystalline TiO₂ grown at 200 °C (11.2 nm thickness) presented the highest degradation efficiency viz 55% with an illumination time of 240 min. Furthermore, its recyclability was also demonstrated for multiple cycles, showing good recovery and potential for practical applications.

Amorphous or anatase crystalline TiO₂/VA-CNT nanocomposites were grown controlling the synthesis temperature. Photocatalytic degradation of RhB of 55% was achieved after 240 min. The immobilized material remains active after 4 cycles of use.

Rhodamine B Photodegradation in Aqueous Solutions Containing Nitrogen Doped TiO2 and Carbon Nanotubes Composites

In this work, new results concerning the potential of mixtures based on nitrogen doped titanium dioxide (TiO₂:N) and carbon nanotubes (CNTs) as possible catalyst candidates for the rhodamine B (RhB) UV photodegradation are reported. The RhB photodegradation was evaluated by UV-VIS absorption spectroscopy using samples of TiO₂:N and CNTs of the type of single-walled carbon nanotubes (SWNTs), double-wall carbon nanotubes (DWNTs), multi-wall carbon nanotubes (MWNTs), and single-walled carbon nanotubes functionalized with carboxyl groups (SWNT-COOH) having various concentrations of CNTs. The best photocatalytic performance was obtained for sample containing TiO₂:N and 2.5 wt.% SWNTs-COOH, when approx. 85% of dye removal was achieved after 300 min. of UV irradiation. The reaction kinetics of RhB aqueous solutions containing TiO₂:N/CNT mixtures followed a complex first-order kinetic model. The TiO₂:N/CNTs catalyst induced higher photodegradation efficiency of RhB than TiO₂:N due to the presence of CNTs, which act as adsorbent and dispersing agent and capture the photogenerated electrons of TiO₂:N hindering the electron-hole recombination.

Electrospun rhodamine@MOF/polymer luminescent fibers with a quantum yield of over 90

Tailored luminescent guest@metal-organic framework (Guest@MOF) materials with outstanding photophysical properties are enabling materials for emergent technologies in smart sensors and optoelectronics. However, the practical utility of Guest@MOF currently is impaired by its poor stability and difficult-to-handle powder form. Here, we combine a luminescent-sensing Guest@MOF system with a non-luminescent polymer matrix and, for the first time, demonstrated the easy-to-apply electrospinning of luminescent fibers comprising nanocrystals of RhB@ZIF-71 (rhodamine B@zeolitic imidazolate framework-71) homogeneously dispersed in a polyvinylidene difluoride (PVDF) matrix. The luminescence of RhB@ZIF-71/PVDF fiber is tunable and exhibits a quantum yield exceeding 90%. Compared with RhB fluorophore in PVDF fiber, the ZIF-71 (host) protects the nanoconfined RhB guest molecules (especially the J-aggregates of RhB), giving the composite fiber its unique thermofluorochromic response and enhanced thermal stability to 200°C. Our results reveal the exciting opportunities for implementing electrospun luminescent fibers functionalized with bespoke Guest@MOF nanocrystals for multifunctional device applications.

Shell-Isolated Au Nanoparticles Functionalized with Rhodamine B Fluorophores in Helium Nanodroplets

Nanoparticles consisting of three different materials in a layered core@shell@shell structure are synthesized in cold helium droplets by sequential doping. Upon the formation of Au core particles, a first shell layer is formed by adding either Ar, isopropyl alcohol, or hexane. Subsequently, the droplets are doped with rhodamine B (RB) molecules; fluorescence spectra recorded upon laser excitation at 532 nm provide insight into the structure of the formed complexes. For the two-component Au@RB system, the RB fluorescence is quenched in the presence of the Au core. If an intermediate isolating shell layer is introduced (Au@shell@RB), the fluorescence increases again. The results demonstrate that shell-isolated nanoparticles can be formed inside He nanodroplets and functionalized in situ with additional molecules. As the structure of the particles depends on the pickup sequence, the approach can be exploited for the synthesis and investigation of a large variety of different combinations of plasmonic metals, intermediate layers, and molecules.

Photoluminescent and Chromic Nanomaterials for Anticounterfeiting Technologies: Recent Advances and Future Challenges

Counterfeiting and inverse engineering of security and confidential documents, such as banknotes, passports, national cards, certificates, and valuable products, has significantly been increased, which is a major challenge for governments, companies, and customers. From recent global reports published in 2017, the counterfeiting market was evaluated to be $107.26 billion in 2016 and forecasted to reach $206.57 billion by 2021 at a compound annual growth rate of 14.0%. Development of anticounterfeiting and authentication technologies with multilevel securities is a powerful solution to overcome this challenge. Stimuli-chromic (photochromic, hydrochromic, and thermochromic) and photoluminescent (fluorescent and phosphorescent) compounds are the most significant and applicable materials for development of complex anticounterfeiting inks with a high-security level and fast authentication. Highly efficient anticounterfeiting and authentication technologies have been developed to reach high security and efficiency. Applicable materials for anticounterfeiting applications are generally based on photochromic and photoluminescent compounds, for which hydrochromic and thermochromic materials have extensively been used in recent decades. A wide range of materials, such as organic and inorganic metal complexes, polymer nanoparticles, quantum dots, polymer dots, carbon dots, upconverting nanoparticles, and supramolecular structures, could display all of these phenomena depending on their physical and chemical characteristics. The polymeric anticounterfeiting inks have recently received significant attention because of their high stability for printing on confidential documents. In addition, the printing technologies including hand-writing, stamping, inkjet printing, screen printing, and anticounterfeiting labels are discussed for introduction of the most efficient methods for application of different anticounterfeiting inks. This review would help scientists to design and develop the most applicable encryption, authentication, and anticounterfeiting technologies with high security, fast detection, and potential applications in security marking and information encryption on various substrates.

A Facile One-Pot Synthesis of Versatile PEGylated Platinum Nanoflowers and Their Application in Radiation Therapy

Nanomedicine has stepped into the spotlight of radiation therapy over the last two decades. Nanoparticles (NPs), especially metallic NPs, can potentiate radiotherapy by specific accumulation into tumors, thus enhancing the efficacy while alleviating the toxicity of radiotherapy. Water radiolysis is a simple, fast and environmentally-friendly method to prepare highly controllable metallic nanoparticles in large scale. In this study, we used this method to prepare biocompatible PEGylated (with Poly(Ethylene Glycol) diamine) platinum nanoflowers (Pt NFs). These nanoagents provide unique surface chemistry, which allows functionalization with various molecules such as fluorescent markers, drugs or radionuclides. The Pt NFs were produced with a controlled aggregation of small Pt subunits through a combination of grafted polymers and radiation-induced polymer cross-linking. Confocal microscopy and fluorescence lifetime imaging microscopy revealed that Pt NFs were localized in the cytoplasm of cervical cancer cells (HeLa) but not in the nucleus. Clonogenic assays revealed that Pt NFs amplify the gamma rays induced killing of HeLa cells with a sensitizing enhancement ratio (SER) of 23%, thus making them promising candidates for future cancer radiation therapy. Furthermore, the efficiency of Pt NFs to induce nanoscopic biomolecular damage by interacting with gamma rays, was evaluated using plasmids as molecular probe. These findings show that the Pt NFs are efficient nano-radio-enhancers. Finally, these NFs could be used to improve not only the performances of radiation therapy treatments but also drug delivery and/or diagnosis when functionalized with various molecules.

Environmentally friendly Au@CNC hybrid systems as prospective humidity sensors

Cellulose nanocrystals are a “green” support for nanogold. Hybrid films quickly and autonomously respond to changes in humidity and can be used in sensing applications.

Density Gradient Selection of Colloidal Silver Nanotriangles for Assembling Dye-Particle Plasmophores

A simple method based on sucrose density gradient centrifugation is proposed here for the fractionation of colloidal silver nanotriangles. This method afforded particle fractions with surface plasmon resonances, spanning from red to infrared spectral ranges that could be used to tune optical properties for plasmonic applications. This feature was exemplified by selecting silver nanotriangle samples with spectral overlap with Atto-655 dye's absorption and emission in order to assemble dye-particle plasmophores. The emission brightness of an individual plasmophore, as characterized by fluorescence correlation spectroscopy, is at least 1000-fold more intense than that of a single Atto-655 dye label, which renders them as promising platforms for the development of fluorescence-based nanosensors.

Plasmon-Enhanced Fluorescence Resonance Energy Transfer

In this review, we firstly introduce physical mechanism of fluorescence resonance energy transfer (FRET), the methods to measure FRET efficiency, and the applications of FRET. Secondly, we introduce the principle and applications of plasmon-enhanced fluorescence (PEF). Thirdly, we focused on the principle and applications of plasmon-enhanced FRET. This review can promote further understanding of FRET and PE-FRET.

Multiple-Exposure Drug Release from Stable Nanodroplets by High-Intensity Focused Ultrasound for a Potential Degenerative Disc Disease Treatment

The combination of simvastatin and CF680 dye encapsulated by stable nanodroplets has been developed as a drug delivery carrier. Simvastatin has previously been found to be a potential degenerative disc disease treatment. Multiple exposures of the nanodroplets to high-intensity focused ultrasound induced release of simvastatin. Each ultrasound exposure yielded a consistent concentration of the drug and dye released. B-mode ultrasound image analysis data and cavitation data clearly indicated the release mechanism is phase transition of the liquid nanodroplets into gas bubbles. The nanodroplets were stably stored in ex vivo rabbit spinal discs for at least 14 days, and the contents responded to ultrasound exposure on demand. Lastly, nucleus pulposus cells harvested from rabbit spine discs and exposed to media with nanodroplets exhibited a decrease in cell viability (85%) relative to the cells only (96.7%) at 24 h, but no difference at 48 h. Thus, the system may be a potential degenerative disc disease treatment.

Optical Biosensing System for the Detection of Survivin mRNA in Colorectal Cancer Cells Using a Graphene Oxide Carrier-Bound Oligonucleotide Molecular Beacon

The anti-apoptotic protein survivin is one of the most promising cancer biomarkers owing to its high expression in human cancers and rare occurrence in normal adult tissues. In this work, we have investigated the role of supramolecular interactions between a graphene oxide (GO) nanosheet nanocarrier and a survivin molecular beacon (SurMB), functionalized by attaching fluorophore Joe and quencher Dabcyl (SurMB-Joe). Molecular dynamics simulations revealed hydrogen bonding of Joe moiety and Dabcyl to GO carriers that considerably increase the SurMB-GO bonding strength. This was confirmed in experimental work by the reduced fluorescence background in the OFF state, thereby increasing the useful analytical signal range for mRNA detection. A new mechanism of hairpin–hairpin interaction of GO@SurMB with target oligonucleotides has been proposed. A low limit of detection, LOD = 16 nM (S/N = 3), has been achieved for complementary tDNA using GO@SurMB-Joe nanocarriers. We have demonstrated an efficient internalization of SurMB-Joe-loaded GO nanocarriers in malignant SW480 cells. The proposed tunability of the bonding strength in the attached motifs for MBs immobilized on nanocarriers, via structural modifications, should be useful in gene delivery systems to enhance the efficacy of gene retention, cell transfection and genomic material survivability in the cellular environment.

Nanosensing of ATP by fluorescence recovery after surface energy transfer between rhodamine B and curcubit[7]uril-capped gold nanoparticles

The authors describe a method for functionalization of gold nanoparticles (AuNPs) with the supramolecular host molecule, curcubit[7]uril (CB[7]) which can bind rhodamine B (RhB). The fluorescence of RhB is quenched by the AuNPs via surface energy transfer. On addition of ATP, a dimeric RhB-ATP complex is formed and RhB is pushed out of CB[7]. Hence, fluorescence increases by a factor of 8. This fluorescence recovery effect has been utilized to develop a new detection scheme for ATP. The assay, measured at fluorescence excitation and emission wavelengths of 500 nm and 574 nm respectively, works in the 0.5-10 μM concentration range and has a 100 nM detection limit. The method is not interfered by UTP, GTP, CTP, TTP, ascorbic acid and glutathione. Graphical abstract Schematic of a method for determination of ATP in the 500 nM to 10 μM concentration range by using fluorescence recovery after surface energy transfer (SET) between rhodamine B (RhB) and gold nanoparticles capped with curcubit[7]uril (CB[7]).

Fluorometric 'switch-on' detection of heparin based on a system composed of rhodamine-labeled chitosan oligosaccharide lactate, and graphene oxide

A novel fluorescence 'Switch on' for the detection of heparin based on the RhB-COL/GO system was achieved. A strong fluorescence dye, Rhodamine B, was modified by chitosan oligosaccharide lactate (COL), which plays a major role in the formation of a positively charged RhB-COL complex. RhB-COL was soluble and stable in solution, which was characterized by using Fourier transform infrared spectroscopy and x-ray photoelectron spectroscopy. GO sheets quenched the fluorescence intensity of RhB-COL due to electron transfer from RhB to the GO surface. The decrease in fluorescence intensity of RhB-COL with increasing GO concentration was recorded using a Cary Eclipse fluorescence spectrophotometer. On the other hand, the addition of heparin replaced GO to bind with the RhB-COL surface via an electrostatic and noncovalent bond due to the abundant negative charge, which resulted in recovery of the fluorescence intensity. This RhB-COL/GO system possessed high selectivity and good sensitivity for the detection of heparin compared to other biomolecules, such as glycine, D-glucose, hyaluronic acid, L-glutamic acid, and ascorbic acid. The linear response toward heparin was measured over the range, 0-1.8 U · ml^-1, with a low detection limit of 0.04 U · ml^-1. The satisfactory sensing performance of RhB-COL/GO for heparin supports new 'switch-on' sensor applications in heparin-related biomedical detection.

Supramolecular interactions of oxidative stress biomarker glutathione with fluorone black

Oxidative stress biomarkers, including glutathione (GSH) and related compounds, are involved in a variety of interactions enabling redox potential maintenance in living cells and protection against radicals. Since the oxidative stress is promoting and, in many cases, inducing serious illnesses, monitoring of GSH levels can aid in diagnostics and disease prevention. Herein, we report on the discovery of the formation of a supramolecular ensemble of GSH with fluorone black (9-phenyl fluorone, FB) which is optically active and enables sensitive determination of GSH by resonance elastic light scattering (RELS). We have found that supramolecular interactions of GSH with FB can be probed with spectroscopic, RELS, and electrochemical methods. Our investigations show that RELS intensity for FB solutions increases with GSH concentration while fluorescence emission of FB is not affected, as quenching begins only above 0.8mM GSH. The UV-Vis difference spectra show a positive peak at 383nm and a negative peak at 458nm, indicating a higher-energy absorbing complex in comparison to the non-bonded FB host. Supramolecular interactions of FB with GSH have also been corroborated by electrochemical measurements involving two configurations of FB-GSH ensembles on electrodes: (i) an inverted orientation on Au-coated quartz crystal piezoelectrode (Au@SG-FB), with strong thiolate bonding to gold, and (ii) a non-inverted orientation on glassy carbon electrode (GCE@FB-GS), with weak π-π stacking attachment and efficient charge mediation through the ensemble. The formation of a supramolecular ensemble with hydrogen bonding has also been confirmed by quantum mechanical calculations. The discovery of supramolecular FB-GSH ensemble formation enables elucidating the mechanisms of strong RELS responses, changes in UV-Vis absorption spectra, and the electrochemical reactivity. Also, it provides new insights to the understanding of the efficient charge-transfer in redox potential homeostasis which is likely based on an intermediate formation of a similar type of supramolecular ensembles.

Light-Activatable Theranostic Agents for Image-Monitored Controlled Drug Delivery

A novel drug delivery vehicle using nanodroplets activated by light irradiation for drug release in a controlled manner has been developed. The drug encapsulated in the nanodroplets was released upon phase transition from a liquid droplet to microbubbles (vaporization) by plasmonic photothermal heat from gold nanorods adsorbed on the surface of the nanodroplets. The nanodroplets were stable against aggregation and dissolution at 4 °C over 3 months to date. The phase transition was quantitatively analyzed by ultrasound imaging to examine the amount of drug release noninvasively. In vitro studies showed that cell death occurred only when light irradiation was performed on the drug-encapsulated nanodroplets. Ex vivo studies demonstrated a potential application of the nanodroplets for treating posterior eye diseases. Thus, it has been demonstrated that our gold-nanorod-coated light-activatable nanodroplets can be a candidate for a controlled release and a dosage-monitored drug delivery system.

Surface-enhanced Raman scattering investigation of targeted delivery and controlled release of gemcitabine

Advanced and metastatic cancer forms are extremely difficult to treat and require high doses of chemotherapeutics, inadvertently affecting also healthy cells. As a result, the observed survival rates are very low. For instance, gemcitabine (GEM), one of the most effective chemotherapeutic drugs used for the treatment of breast and pancreatic cancers, sees only a 20% efficacy in penetrating cancer tissue, resulting in <5% survival rate in pancreatic cancer. Here, we present a method for delivering the drug that offers mitigation of side effects, as well as a targeted delivery and controlled release of the drug, improving its overall efficacy. By modifying the surface of gold nanoparticles (AuNPs) with covalently bonded thiol linkers, we have immobilized GEM on the nanoparticle (NP) through a pH-sensitive amide bond. This bond prevents the drug from being metabolized or acting on tissue at physiological pH 7.4, but breaks, releasing the drug at acidic pH, characteristic of cancer cells. Further functionalization of the NP with folic acid and/or transferrin (TF) offers a targeted delivery, as cancer cells overexpress folate and TF receptors, which can mediate the endocytosis of the NP carrying the drug. Thus, through the modification of AuNPs, we have been able to produce a nanocarrier containing GEM and folate/TF ligands, which is capable of targeted controlled-release delivery of the drug, reducing the side effects of the drug and increasing its efficacy. Here, we demonstrate the pH-dependent GEM release, using an ultrasensitive surface-enhanced Raman scattering spectroscopy to monitor the GEM loading onto the nanocarrier and follow its stimulated release. Further in vitro studies with model triple-negative breast cancer cell line MDA-MB-231 have corroborated the utility of the proposed nanocarrier method allowing the administration of high drug doses to targeted cancer cells.

Coupling of Molecular Transition with the Surface Plasmon Resonance of Silver Nanoparticles inside the Restricted Environment of Reverse Micelles

Interaction of molecular transitions of two fluorophores-fluorescein (FL) and safranin O (SAF)-with the surface plasmon resonance (SPR) of silver nanoparticles (AgNPs) inside a water/sodium dioctylsulfosuccinate (AOT)/n-heptane reverse micelle (RM) has been studied using ultraviolet-visible and fluorescence spectroscopies. Here, we exploit the natural capacity of a RM to act simultaneously as a template for nanoparticle formation and host the fluorophores. The fluorophores and reducing agent were loaded together into the water pool; thereafter, silver salt was added, and subsequently, spectral modification and size evolution were monitored by steady-state and time-resolved optical spectroscopy. In the FL-AgNP composite, the SPR band of AgNPs undergoes a strong red shift. Moreover, significant modifications of both the fluorescence intensity and lifetime of FL were found when AgNPs formed inside the RM core. On the contrary, in the SAF-AgNP composite, no such effect was noticed, and the composite system retains the original optical characteristics of their constituents (i.e., both the position of molecular transitions and SPR maximum remain unchanged). This differential effect has been rationalized by the dissimilar plasmon-fluorophore coupling in the two systems, controlled by a combination of spatial distribution and spectral detuning of the molecular absorption maxima of the dyes (455 and 530 nm for FL and SAF, respectively) from the SPR band maximum (∼400 nm) of AgNPs.

Ternary Interactions and Energy Transfer between Fluorescein Isothiocyanate, Adenosine Triphosphate, and Graphene Oxide Nanocarriers

The interactions of fluorescent probes and biomolecules with nanocarriers are of key importance to the emerging targeted drug delivery systems. Graphene oxide nanosheets (GONs) as the nanocarriers offer biocompatibility and robust drug binding capacity. The interactions of GONs with fluorophores lead to strong fluorescence quenching, which may interfere with fluorescence bioimaging and biodetection. Herein, we report on the interactions and energy transfers in a model ternary system: GONs-FITC-ATP, where FITC is a model fluorophore (fluorescein isothiocyanate) and ATP is a common biomolecule (adenosine-5'-triphosphate). We have found that FITC fluorescence is considerably quenched by ATP (the quenching constant K_SV = 113 ± 22 M^-1). The temperature coefficient of K_SV is positive (α_T = 4.15 M^-1deg^-1). The detailed analysis of a model for internal self-quenching of FITC indicates that the temperature dependence of the net quenching efficiency η for the FITC-ATP pair is dominated by FITC internal self-quenching modes with their contribution estimated at 79%. The quenching of FITC by GONs is much stronger (K_SV = 598 ± 29 M^-1) than that of FITC-ATP and is associated with the formation of supramolecular assemblies bound with hydrogen bonding and π-π stacking interactions. For the analysis of the complex behavior of the ternary system GONs-FITC-ATP, a model of chemisorption of ATP on GONs, with partial blocking of FITC quenching, has been developed. Our results indicate that ATP acts as a moderator for FITC quenching by GONs. The interactions between ATP, FITC, and GONs have been corroborated using molecular dynamics and quantum mechanical calculations.

Highly Selective and Ultrasensitive Turn-on Luminescence Chemosensor for Mercury (II) Determination Based on the Rhodamine 6G Derivative FC1 and Au Nanoparticles

A method for the detection and quantitation of Hg²⁺ in aqueous samples by fluorescence spectroscopy is presented. It consists of a turn-on sensor developed by coupling Gold nanoparticles (AuNPs) with the rhodamine 6G derivative FC1, in which the response is generated by a mercury-induced ring-opening reaction. The AuNPs were included in order to improve the sensitivity of the method towards the analyte, maintaining its high selectivity. The method was validated in terms of linearity, precision and accuracy, and applied to the quantitation of Hg²⁺ in Milli-Q and tap water with and without spiked analyte. The limit of detection and quantitation were 0.15 μg·L⁻¹ and 0.43 μg·L⁻¹, respectively, constituting a substantial improvement of sensitivity in comparison with the previously reported detection of Hg²⁺ with free FC1.

DNA Strand Replacement Mechanism in Molecular Beacons Encoded for the Detection of Cancer Biomarkers

Signaling properties of a fluorescent hairpin oligonucleotide molecular beacon (MB) encoded to recognize protein survivin (Sur) mRNA have been investigated. The process of complementary target binding to SurMB with 20-mer loop sequence is spontaneous, as expected, and characterized by a high affinity constant (K = 2.51 × 10(16) M(-1)). However, the slow kinetics at room temperature makes it highly irreversible. To understand the intricacies of target binding to MB, a detailed kinetic study has been performed to determine the rate constants and activation energy Ea for the reaction at physiological temperature (37 °C). Special attention has been paid to assess the value of Ea in view of reports of negative activation enthalpy for some nucleic acid reactions that would make the target binding even slower at increasing temperatures in a non-Arrhenius process. The target-binding rate constant determined is k = 3.99 × 10(3) M(-1) s(-1) at 37 °C with Ea = 28.7 ± 2.3 kcal/mol (120.2 ± 9.6 kJ/mol) for the temperature range of 23 to 55 °C. The positive high value of Ea is consistent with a kinetically controlled classical Arrhenius process. We hypothesize that the likely contribution to the activation energy barrier comes from the SurMB stem melting (tm = 53.7 ± 0.2 °C), which is a necessary step in the completion of target strand hybridization with the SurMB loop. A low limit of detection (LOD = 2 nM) for target tDNA has been achieved. Small effects of conformational polymorphs of SurMB have been observed on melting curves. Although these polymorphs could potentially cause a negative Ea, their effect on kinetic transients for target binding is negligible. No toehold preceding steps in the mechanism of target binding were identified.

Wavelength dependent specific plasmon resonance coupling of single silver nanoparticles with EGFP

Noble metal nanoparticles (NPs) possess unique plasmonic properties, enabling them to serve as sub-diffraction light sources and nano- antennae for a wide range of applications. Here we report the specific interaction of single Ag NPs with single EGFP molecules and a high dependence of their interaction upon localized-surface-plasmon-resonance (LSPR) spectra of single Ag NPs and EGFP. The LSPR spectra of single red Ag NPs show a stunning 60 nm blue-shift during their incubation with EGFP, whereas they remain unchanged during their incubation with bovine serum albumin (BSA). Interestingly, the peak wavelengths of the LSPR spectra of green and blue Ag NPs remain essentially unchanged during their incubation with either EGFP or BSA. These interesting findings suggest that plasmon-resonance-energy-transfer (PRET) from single Ag NPs to EGFP might follow a two-photon excitation mechanism to excite EGFP and the fluorescence of the excited EGFP might couple with the plasmon of single NPs leading to a blue-shift of the red NPs. These distinctive phenomena are only observed by real-time single NP spectroscopic measurements. This study offers exciting new opportunities to design new sensing and imaging tools with high specificity and sensitivity to study long-range molecular interactions and dynamic events in single live cells, and to probe the underlying molecular mechanisms of PRET.

Poly(N-acryloyl ciprofloxacin-co-acrylic acid) grafted magnetite nanoparticles for microbial decontamination of collagen solution: have we conquered the problem of antimicrobial residues?

A strategy to avoid antimicrobial residues in decontaminated collagen solution is provided.

DNA-length-dependent quenching of fluorescently labeled iron oxide nanoparticles with gold, graphene oxide and MoS2 nanostructures

We controlled the fluorescence emission of a fluorescently labeled iron oxide nanoparticle using three different nanomaterials with ultraefficient quenching capabilities. The control over the fluorescence emission was investigated via spacing introduced by the surface-functionalized single-stranded DNA molecules. DNA molecules were conjugated on different templates, either on the surface of the fluorescently labeled iron oxide nanoparticles or gold and nanographene oxide. The efficiency of the quenching was determined and compared with various fluorescently labeled iron oxide nanoparticle and nanoquencher combinations using DNA molecules with three different lengths. We have found that the template for DNA conjugation plays significant role on quenching the fluorescence emission of the fluorescently labeled iron oxide nanoparticles. We have observed that the size of the DNA controls the quenching efficiency when conjugated only on the fluorescently labeled iron oxide nanoparticles by setting a spacer between the surfaces and resulting change in the hydrodynamic size. The quenching efficiency with 12mer, 23mer and 36mer oligonucleotides decreased to 56%, 54% and 53% with gold nanoparticles, 58%, 38% and 32% with nanographene oxide, 46%, 38% and 35% with MoS2, respectively. On the other hand, the presence, not the size, of the DNA molecules on the other surfaces quenched the fluorescence significantly with different degrees. To understand the effect of the mobility of the DNA molecules on the nanoparticle surface, DNA molecules were attached to the surface with two different approaches. Covalently immobilized oligonucleotides decreased the quenching efficiency of nanographene oxide and gold nanoparticles to ∼22% and ∼21%, respectively, whereas noncovalently adsorbed oligonucleotides decreased it to ∼25% and ∼55%, respectively. As a result, we have found that each nanoquencher has a powerful quenching capability against a fluorescent nanoparticle, which can be tuned with surface functionalized DNA molecules.

Solvothermal-induced conversion of one-dimensional multilayer nanotubes to two-dimensional hydrophilic VOx nanosheets: synthesis and water treatment application

Ultrathin 2D nanostructures have shown many unique properties and are attractive for various potential applications. Here, we demonstrated a strategy to synthesize ultrathin VOx nanosheets. The as-obtained ultrathin VOx nanosheets showed a large Brunauer-Emmett-Teller (BET) surface area of 136.3 m2 g(-1), which is much larger than that of 1D multilayer VOx nanotubes. As a proof of concept, these hydrophilic ultrathin nanosheets were applied in water treatment and exhibited excellent absorption capability to remove Rhodamine B (RhB) in wastewater owing to their large specific surface area, good hydrophilic property, and more negative zeta potential. In addition, this method could be generalized to prepare other 2D nanostructures with great potential for various attractive applications.

Upconversion nanoparticle-based Förster resonance energy transfer for detecting the IS6110 sequence of Mycobacterium tuberculosis complex in sputum

Upconversion nanoparticles (UCNPs), which are excited at near-infrared wavelength (980 nm), emit high-energy photons. Since UCNPs display a high signal-to-noise ratio and no photobleaching, they are extremely useful for diagnostic application. In this study, we applied UCNPs for detecting the IS6110 sequence of the Mycobacterium tuberculosis complex (MTBC) and evaluated the feasibility of the system for use in molecular diagnostics. Using biotinylated primers, IS6110 DNA PCR was performed and the PCR amplicon was then mixed with streptavidin-conjugated UCNPs, followed by intercalation with SYTOX Orange dye. Fluorescence detection for the Förster resonance energy transfer (FRET) of the UCNPs (UCNP-FRET) was then performed. The estimated lowest detection by UCNP-FRET was 10(2) copies/μL of IS6110 DNA (157 bp). The kappa agreement of the UCNP-FRET assay with conventional PCR was 0.8464 (95% confidence interval, 0.7442-0.9486) and false-negative results were reduced. Our results demonstrated the successful implementation of the UCNP-FRET system in detecting the IS6110 sequence of the MTBC and its potential application for molecular diagnostics.

Chromium(VI) but not chromium(III) species decrease mitoxantrone affinity to DNA

Binding of mitoxantrone (MXT) to double-stranded DNA has been investigated as a model drug-DNA binding system to evaluate the effects of various forms of chromium on the binding properties. We have found that Cr(III), which binds strongly to DNA, does not affect the MXT affinity to DNA. In contrast, Cr(VI), in the form of chromate ions CrO(4)(2-), decreases the MXT affinity to DNA despite electrostatic repulsions with phosphate-deoxyribose chains of DNA. The MXT-DNA binding constant was found to decrease from (1.96 ± 0.005) × 10(5) to (0.77 ± 0.018) × 10(5) M(-1) for Cr(VI) concentration changing from 0 to 30 μM. The influence of Cr(VI) on MXT-DNA binding has been attributed to the oxidation of guanine residue, thus interrupting the intercalation of MXT into the DNA double helix at the preferential CpG intercalation site. This supposition is corroborated by the observed increase in the MXT binding site size from 2 bp (base pairs) to 4-6 bp in the presence of Cr(VI). The measurements of the MXT-DNA binding constant and the MXT binding site size on a DNA molecule have been carried out using spectroscopic, voltammetric, and nanogravimetric techniques, providing useful information on the mechanism of the interactions.

Phospholipid membrane encapsulation of nanoparticles for surface-enhanced Raman scattering

Lipid-encapsulated surface-enhanced Raman scattering (SERS) nanoparticles, with promising applications in biomedical diagnostics, were produced. Gold nanoparticles, 60 nm in diameter, were coated with a ternary mixture of DOPC, sphingomyelin, and cholesterol. The lipid layer is versatile for engineering the chemical and optical properties of the particles. The stability of the lipid-encapsulated particles is demonstrated over a period of weeks. The versatility of the layer is demonstrated by the incorporation of three different Raman-active species using three different strategies. The lipid layer was directly observed by TEM, and the SERS spectrum of the three dye species was confirmed by Raman spectroscopy. UV-vis absorption and dynamic light scattering provide additional evidence of lipid encapsulation. The encapsulation is achieved in aqueous solution, avoiding phase transfer and possible contamination from organic solvents. Furthermore, when fluorescent dye-labeled lipids were employed in the encapsulant, the fluorescence and SERS activity of the particles were controlled by the use of dissolved ions in the preparation solution.

Double-shell gold nanoparticle-based DNA-carriers with poly-L-lysine binding surface

In view of the prospective applications of polyamine coatings in functional gold nanoparticles for use as carriers in gene delivery systems, in tissue repair and as bactericidal and virucidal non-toxic vehicle, we have investigated the interactions of poly-l-lysine (PLL) with gold nanoparticles (AuNP). Since direct binding of PLL to AuNP is not strong at neutral pH, we have focused on PLL interactions with carboxylated self-assembled monolayers (SAM) on AuNP, such as the citrate-capped AuNP. The double-shell nanoparticles AuNP@Cit/PLL thus produced do not contain any toxic thiols. We have observed strong electrostatic interactions between polycationic chains of PLL and AuNP@Cit in weakly acidic to weakly alkaline solutions (pH 5-9), as evidenced by the bathochromic shift of the local surface plasmon (SP) band and strong increase in resonance elastic light scattering (RELS) intensity. The stoichiometry of interactions evaluated on the basis of RELS data indicates on a hyper-Langmuirian type of interactions with stoichiometric coefficient n = 1.35 (PLL : AuNP@Cit). From the RELS titration data, a shift of the deprotonation constant for the bound PLL has been determined (pK(a) = 11.6 for the bound PLL vs. 10.48 for the free PLL). The deprotonation of PLL leads to AuNP aggregate disassembly, evidenced by sharp RELS decline and hypsochromic shift of SP band. We have found that under these conditions, a residual aggregation due to the interparticle interactions between β-sheets of PLL overcoat become predominant. The molecular dynamics simulations indicate that multiple hydrogen bonds can also be formed between the PLL linker and the shell molecules of AuNP@Cit. The double-shell nanoparticles, AuNP@Cit/PLL, have been shown to attract DNA molecules using highly sensitive RELS measurements presenting the proof-of-concept for the suitability of this non-toxic nanostructured material for gene delivery applications. The advantage of the proposed material is no toxicity related to the ligand release in gene delivery processes in contrast to the thiol-functionalized AuNP.