Moderating the interaction among Pd, CeO2, and Al2O3 for improved three-way catalysts

The Pd distribution and the CeO₂-Al₂O₃ combination are among the decisive factors for the performance of commercial three-way catalysts. Generally, the sufficient doping of Pd into ceria-based oxides and the intimate interaction between CeO₂ and Al₂O₃ could both benefit the three-way catalytic reactions. However, in the present work, the moderate doping of Pd into CeO₂ and less intimate CeO₂-Al₂O₃ interaction were found to be responsible for the much higher catalytic activity (the decrease in T₅₀ was 52, 119, or 55 °C for C₃H₆, CO, or NO) in PdCe/Al₂O₃-CP than PdCe/Al₂O₃-Imp, for which the Pd and Ce species were co-loaded onto Al₂O₃ through the co-precipitation or impregnation method, respectively. It was intriguing to find that the co-precipitated PdCeO_x in PdCe/Al₂O₃-CP showed less sufficient doping of Pd into CeO₂ than the co-impregnated PdCeO_x in PdCe/Al₂O₃-Imp; as a result, both a higher fraction of highly active metallic Pd and a higher Pd dispersion were realized in PdCe/Al₂O₃-CP. Moreover, due to the less intimate CeO₂-Al₂O₃ interaction, specifically the less severe penetration of the Pd and Ce species into Al₂O₃, PdCe/Al₂O₃-CP showed higher Pd dispersion, specific surface area, pore volume and size than PdCe/Al₂O₃-Imp. The presence of more abundant reactive Pd⁰, and the higher accessibility of the active Pd and CeO₂ sites, together with improved redox properties and enriched oxygen vacancies contributed much to the enhanced three-way catalytic activity of PdCe/Al₂O₃-CP. Additionally, simultaneously optimizing the Pd distribution and the CeO₂-Al₂O₃ combination in a single step, as reported in this work, is also highly desirable in industry.

On the effect of metal loading on the reducibility and redox chemistry of ceria supported Pd catalysts

The effect of Pd loading on the redox characteristics of a ceria support was examined using in situ Pd K-edge XAS, Ce L₃-edge XAS and in situ X-ray diffraction techniques. Analysis of the data obtained from these techniques indicates that the onset temperature for the partial reduction of Ce(IV) to Ce(III), by exposure to H₂, varies inversely with the loading of Pd. Whilst the onset and completion temperatures of the reduction of Ce(IV) to Ce(III) are different, both samples yield the same maximal fraction of Ce(III) formation independent of Pd loading. Furthermore, the partial reduction of Ce is found to be concurrent with the reduction of PdO and demonstrated that the presence of metallic Pd is necessary for the reduction of the CeO₂ support. Upon passivation by room temperature oxidation, a full oxidation of the reduced ceria support was observed. However, only a mild surface oxidation of Pd was identified. The mild passivation of the Pd is found to lead to a highly reactive sample upon a second reduction by H₂. The onset of the reduction of Pd and Ce has been demonstrated to be independent of the Pd loading after a mild passivation with both samples exhibiting near room temperature reduction in the presence of H₂.

Adsorption and Oxidation of CO on Ceria Nanoparticles Exposing Single-Atom Pd and Ag: A DFT Modelling

Various COx species formed upon the adsorption and oxidation of CO on palladium and silver single atoms supported on a model ceria nanoparticle (NP) have been studied using density functional calculations. For both metals M, the ceria-supported MCOx moieties are found to be stabilised in the order MCO < MCO2 < MCO3, similar to the trend for COx species adsorbed on M-free ceria NP. Nevertheless, the characteristics of the palladium and silver intermediates are different. Very weak CO adsorption and the small exothermicity of the CO to CO2 transformation are found for O4Pd site of the Pd/Ce21O42 model featuring a square-planar coordination of the Pd2+ cation. The removal of one O atom and formation of the O3Pd site resulted in a notable strengthening of CO adsorption and increased the exothermicity of the CO to CO2 reaction. For the analogous ceria models with atomic Ag instead of atomic Pd, these two energies became twice as small in magnitude and basically independent of the presence of an O vacancy near the Ag atom. CO2-species are strongly bound in palladium carboxylate complexes, whereas the CO2 molecule easily desorbs from oxide-supported AgCO2 moieties. Opposite to metal-free ceria particle, the formation of neither PdCO3 nor AgCO3 carbonate intermediates before CO2 desorption is predicted. Overall, CO oxidation is concluded to be more favourable at Ag centres atomically dispersed on ceria nanostructures than at the corresponding Pd centres. Calculated vibrational fingerprints of surface COx moieties allow us to distinguish between CO adsorption on bare ceria NP (blue frequency shifts) and ceria-supported metal atoms (red frequency shifts). However, discrimination between the CO2 and CO32- species anchored to M-containing and bare ceria particles based solely on vibrational spectroscopy seems problematic. This computational modelling study provides guidance for the knowledge-driven design of more efficient ceria-based single-atom catalysts for the environmentally important CO oxidation reaction.

Stable and Catalytically Active Shape-Engineered Cerium Oxide Nanorods by Controlled Doping of Aluminum Cations

Shape-engineered nanocrystals (SENs) promise a better selectivity and a higher activity in catalytic reactions than the corresponding non-shape-engineered ones because of their larger specific surface areas and desirable crystal facets. However, often, it is challenging to apply SENs in practical catalytic applications at high reaction temperatures, where SENs deforms into more stable, less active nanoparticles. In this paper, we show that atomic layer deposition (ALD) of Al₂O₃ at 200 °C can controllably dope Al cations into the shape-engineered CeO₂ nanorods (NRs) to not only increase their shape transition temperature from 400 °C to beyond 700 °C but also greatly increase their specific reversible oxygen storage capacity (srOSC). The substituted Al³⁺ ions impede the surface diffusion of Ce ions and therefore improve the thermal stability of CeO₂ NRs. These Al³⁺ dopants form -Al-O-Ce-O- clusters, which are new Ce species and can be reversibly reduced and oxidized at 500-700 °C. This low-temperature chemical doping method decouples the synthesis process of SENs from the doping process and maintains the shape of the SENs during the activation of dopants. This concept could be adopted to enable the applications of other SENs in challenging high-temperature environments.

Strain-engineered indirect-direct band-gap transitions of PbPdO2 slab with preferred (0 0 2) orientation

Layered transition metal oxide PbPdO₂ has great potential application in electronic devices because of its unique electronic structure and large thermoelectric power at room temperature. In this work, strain effect on the electronic structure of PbPdO₂ slab with preferred (0 0 2) orientation was systematically investigated using first-principles calculation. The calculated results indicate that PbPdO₂ ultrathin slab possesses a small indirect gap while an indirect-direct band gap transition occurs when a moderate 2% compression or tensile strain is applied on the slab. Moreover, this strain induced indirect-direct band gap transition was analyzed in detail using the charge density difference at different point of valence band. The charge transfer and energy barrier with charge polarization resulting from the changes of bond length and angle for Pd-O bonding under the strain, have been accounted for this transition. Remarkablely, for the (0 0 2) preferred orientation PbPdO₂ slab, the predicted carrier mobilities of electrons and holes are 11 645.31 and 694.60 cm² V^-1 s^-1 along the x-axis direction, 935.05 and 16.05 cm² V^-1 s^-1 along the y -axis direction, respectively. These calculated mobilities of electrons along the x-axis direction are larger than those for 2D MoS₂ (~400 cm² V^-1 s^-1), and being comparable to those for InSe (10³ cm² V^-1 s^-1) and black phosphorene (10³-10⁴ cm² V^-1 s^-1). It is strong suggested that the (0 0 2) orientated PbPdO₂ slab with high mobility should be an ideal candidate material for the application of electronics devices.

Pt/CeO2 and Pt/CeSnOx Catalysts for Low-Temperature CO Oxidation Prepared by Plasma-Arc Technique

We applied a method of plasma arc synthesis to study effects of modification of the fluorite phase of ceria by tin ions. By sputtering active components (Pt, Ce, Sn) together with carbon from a graphite electrode in a helium ambient we prepared samples of complex highly defective composite PtCeC and PtCeSnC oxide particles stabilized in a matrix of carbon. Subsequent high-temperature annealing of the samples in oxygen removes the carbon matrix and causes the formation of active catalysts Pt/CeO_x and Pt/CeSnO_x for CO oxidation. In the presence of Sn, X-Ray Diffraction (XRD) and High-Resolution Transmission Electron Microscopy (HRTEM) show formation of a mixed phase CeSnO_x and stabilization of more dispersed species with a fluorite-type structure. These factors are essential for the observed high activity and thermic stability of the catalyst modified by Sn. X-Ray Photoelectron Spectroscopy (XPS) reveals the presence of both Pt²⁺ and Pt⁴⁺ ions in the catalyst Pt/CeO_x, whereas only the state Pt²⁺ of platinum could be detected in the Sn-modified catalyst Pt/CeSnO_x. Insertion of Sn ions into the Pt/CeO_x lattice destabilizes/reduces Pt⁴⁺ cations in the Pt/CeSnO_x catalyst and induces formation of strikingly high concentration (up to 50% at.) of lattice Ce³⁺ ions. Our DFT calculations corroborate destabilization of Pt⁴⁺ ions by incorporation of cationic Sn in Pt/CeO_x. The presented results show that modification of the fluorite lattice of ceria by tin induces substantial amount of mobile reactive oxygen partly due to affecting geometric parameters of ceria by tin ions.

Tuning Pt-CeO2 interactions by high-temperature vapor-phase synthesis for improved reducibility of lattice oxygen

In this work, we compare the CO oxidation performance of Pt single atom catalysts (SACs) prepared via two methods: (1) conventional wet chemical synthesis (strong electrostatic adsorption–SEA) with calcination at 350 °C in air; and (2) high temperature vapor phase synthesis (atom trapping–AT) with calcination in air at 800 °C leading to ionic Pt being trapped on the CeO₂ in a thermally stable form. As-synthesized, both SACs are inactive for low temperature (<150 °C) CO oxidation. After treatment in CO at 275 °C, both catalysts show enhanced reactivity. Despite similar Pt metal particle size, the AT catalyst is significantly more active, with onset of CO oxidation near room temperature. A combination of near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and CO temperature-programmed reduction (CO-TPR) shows that the high reactivity at low temperatures can be related to the improved reducibility of lattice oxygen on the CeO₂ support.

While single-atom catalysts (SACs) have attracted a lot of interest, the nature of the active sites in SACs remains elusive. Here the authors elucidate that depositing single atoms via high temperature synthesis leads to improved reducibility of lattice oxygen on CeO2 yielding low temperature reactivity of Pt catalysts in CO oxidation.

Stable Pd-Doped Ceria Structures for CH4 Activation and CO Oxidation

Doping CeO2 with Pd atoms has been associated with catalytic CO oxidation, but current surface models do not allow CO adsorption. Here, we report a new structure of Pd-doped CeO2(111), in which Pd adopts a square planar configuration instead of the previously assumed octahedral configuration. Oxygen removal from this doped structure is favorable. The resulting defective Pd-doped CeO2 surface is active for CO oxidation and is also able to cleave the first C-H bond in methane. We show how the moderate CO adsorption energy and dynamic features of the Pd atom upon CO adsorption and CO oxidation contribute to a low-barrier catalytic cycle for CO oxidation. These structures, which are also observed for Ni and Pt, can lead to a more open coordination environment around the doped-transition-metal center. These thermally stable structures are relevant to the development of single-atom catalysts.

Metal-doped ceria nanoparticles: stability and redox processes

Doping oxide materials by inserting atoms of a different element in their lattices is a common procedure for modifying properties of the host oxide. Using catalytically active, yet expensive noble metals as dopants allows synthesizing materials with atomically dispersed metal atoms, which can become cost-efficient catalysts. The stability and chemical properties of the resulting materials depend on the structure of the host oxide and on the position of the dopant atoms in it. In the present work we analyze by means of density functional calculations the relative stability and redox properties of cerium dioxide (ceria) nanoparticles doped with atoms of four technologically relevant transition metals - Pt, Pd, Ni and Cu. Our calculations indicate that the dopants are most stable at surface positions of ceria nanoparticles, highlighting the role of under-coordinated sites in the preparation and characterization of doped nanostructured oxides. The energies of two catalytically important reduction reactions - the formation of oxygen vacancies and homolytic dissociative adsorption of H₂ - are found to strongly depend on the position of the doping atoms in nanoparticulate ceria.

Reactivity of atomically dispersed Pt2+ species towards H2: model Pt–CeO2 fuel cell catalyst

Formation of at least two oxygen vacancies triggers the reduction of one Pt²⁺ species.

Noble metal ions in CeO2 and TiO2: synthesis, structure and catalytic properties

CeO₂ and TiO₂ based noble metal ionic catalysts show very high catalytic activities toward several reactions such as auto exhaust, water gas shift, H₂ + O₂ recombination compared to supported nanometal catalysts due to their electronic interactions.

The structure and stability of reduced and oxidized mononuclear platinum species on nanostructured ceria from density functional modeling

The most stable neutral and ionic mononuclear platinum species and their positions on a ceria nanoparticle under different conditions are identified.

Spectromicroscopic evidence of interstitial and substitutional dopants in association with oxygen vacancies in Sm-doped ceria nanoparticles

Dopant-induced structural differences and defects in Sm doped CeO2 nanoparticles (NPs) exhibiting room temperature ferromagnetism were investigated by complementary spectroscopic analysis, including X-ray Absorption Spectroscopy, Extended X-Ray Absorption Fine Structure analysis, Raman spectroscopy and atomically resolved Scanning Transmission Electron Microscopy-Electron Energy Loss Spectroscopy (STEM-EELS). The CeO2 NPs were prepared by precipitation methods with Sm/Ce ratios ranging from 0 to 0.17 and with typical sizes from 2 to 4 nanometers. These results demonstrated that the nature and the distributions of defects strongly depend on the concentrations of the dopants. Two regimes in the formation of these (Ce1-x, Smx)O2-δ NPs were observed. At lower dopant levels (x < 7%), Sm(3+) atoms mainly replace the Ce atoms in the (Ce(3+)-O(2-) vacancy) complexes which are present in ceria NPs. The dopants are unambiguously observed and localized as diluted by real space STEM-EELS spectromicroscopy done with atomic sensitivity. Nevertheless, this substitution induces a strong structural rearrangement and some Sm dopants are also observed as interstitials in association with Ce vacancies. At higher doping concentrations (x > 7%), a Sm rich phase in association with a high amount of oxygen vacancies is observed at the surface of the particles. It results in the formation of core-shell type nanoparticles with crystallographic continuities where a Sm doped CeO2-δ core is surrounded by a layer of typical (Ce0.7, Sm0.3)2O3 composition.

Chemistry of precious metal oxides relevant to heterogeneous catalysis

The platinum group metals (PGMs) are widely employed as catalysts, especially for the mitigation of automotive exhaust pollutants. The low natural abundance of PGMs and increasing demand from the expanding automotive sector necessitates strategies to improve the efficiency of PGM use. Conventional catalysts typically consist of PGM nanoparticles dispersed on high surface area oxide supports. However, high PGM loadings must be used to counter sintering, ablation, and deactivation of the catalyst such that sufficient activity is maintained over the operating lifetime. An appealing strategy for reducing metal loading is the substitution of PGM ions into oxide hosts: the use of single atoms (ions) as catalytic active sites represents a highly atom-efficient alternative to the use of nanoparticles. This review addresses the crystal chemistry and reactivity of oxide compounds of precious metals that are, or could be relevant to developing an understanding of the role of precious metal ions in heterogeneous catalysis. We review the chemical conditions that facilitate stabilization of the notoriously oxophobic precious metals in oxide environments, and survey complex oxide hosts that have proven to be amenable to reversible redox cycling of PGMs.

The local structure of PdxCe1−xO2−x−δsolid solutions

In this paper, physical methods in combination with quantum chemistry calculations are used to study the local structure of Pd_xCe_1−xO_2−δsolid solutions.