Atomic Level Understanding of the Structural Stability and Catalytic Activity of Nanoporous Gold/Titania Cluster Inverse Catalysts at Ambient and High Temperatures

Nanoporous gold (NPG) exhibits exceptional catalytic performance at low temperatures, but its activity declines at elevated temperatures due to structural coarsening. Loading metal oxide nanoparticles onto NPG can enhance its catalytic activity at high temperatures. In this work, we used NPG-supported titania nanoparticles as a model system (denoted as Ti2O4/NPG) to study their catalytic activity at ambient and high temperatures with CO oxidation as a probe reaction by density functional theory (DFT) calculation and ab initio molecular dynamics (AIMD) simulations. The possible factors that may affect the CO oxidation reaction pathways and energy profiles on the Ti2O4/NPG, such as oxygen vacancies; silver impurities; Mars-van Krevelen (MvK), Eley-Rideal (ER), or trimolecular Eley-Rideal (TER) mechanisms; and catalytic active sites, were comprehensively investigated. The results showed that reaction energy barriers on Ti2O4/NPG were not significantly decreased compared to the pristine NPG, indicating that their catalytic activities at ambient temperature were comparable. At the evaluated temperature (400 °C), the Ti2O4/NPG exhibited superior thermal stability and maintained its active sites, while the NPG reduced active sites due to surface coarsening. The strong oxide-metal interaction (SOMI) effect between the NPG and Ti2O4 nanoparticles is found to be a main factor for the high structural stability and catalytic activity at high temperatures.

Nanoporous Gold: From Structure Evolution to Functional Properties in Catalysis and Electrochemistry

Nanoporous gold (NPG) is characterized by a bicontinuous network of nanometer-sized metallic struts and interconnected pores formed spontaneously by oxidative dissolution of the less noble element from gold alloys. The resulting material exhibits decent catalytic activity for low-temperature, aerobic total as well as partial oxidation reactions, the oxidative coupling of methanol to methyl formate being the prototypical example. This review not only provides a critical discussion of ways to tune the morphology and composition of this material and its implication for catalysis and electrocatalysis, but will also exemplarily review the current mechanistic understanding of the partial oxidation of methanol using information from quantum chemical studies, model studies on single-crystal surfaces, gas phase catalysis, aerobic liquid phase oxidation, and electrocatalysis. In this respect, a particular focus will be on mechanistic aspects not well understood, yet. Apart from the mechanistic aspects of catalysis, best practice examples with respect to material preparation and characterization will be discussed. These can improve the reproducibility of the materials property such as the catalytic activity and selectivity as well as the scope of reactions being identified as the main challenges for a broader application of NPG in target-oriented organic synthesis.

New Perspectives for Evaluating the Mass Transport in Porous Catalysts and Unfolding Macro- and Microkinetics

In this article we shed light on newly emerging perspectives to characterize and understand the interplay of diffusive mass transport and surface catalytic processes in pores of gas phase metal catalysts. As a case study, nanoporous gold, as an interesting example exhibiting a well-defined pore structure and a high activity for total and partial oxidation reactions is considered. PFG NMR (pulsed field gradient nuclear magnetic resonance) measurements allowed here for a quantitative evaluation of gas diffusivities within the material. STEM (scanning transmission electron microscopy) tomography furthermore provided additional insight into the structural details of the pore system, helping to judge which of its features are most decisive for slowing down mass transport. Based on the quantitative knowledge about the diffusion coefficients inside a porous catalyst, it becomes possible to disentangle mass transport contributions form the measured reaction kinetics and to determine the kinetic rate constant of the underlying catalytic surface reaction. In addition, predictions can be made for an improved effectiveness of the catalyst, i.e., optimized conversion rates. This approach will be discussed at the example of low-temperature CO oxidation, efficiently catalysed by npAu at 30 °C. The case study shall reveal that novel porous materials exhibiting well-defined micro- and mesoscopic features and sufficient catalytic activity, in combination with modern techniques to evaluate diffusive transport, offer interesting new opportunities for an integral understanding of catalytic processes.

Graphical Abstract

Exploring the Effects of a Doping Silver Atom on Anionic Gold Clusters' Reactivity with O2

Reactivities of AgAu_n-1^- (n = 3-10) with O₂ at a low temperature were studied using an instrument combining a magnetron sputter cluster source, a microflow reactor, and a time-of-flight mass spectrometer. Their reaction products as well as size-dependent kinetic rates were nearly identical to those of corresponding Au_n^- (n = 3-10). Previous experiments showed that the Ag atom in AgAu_n-1^- (n = 3-10) was fully or partially enclosed by the gold atoms. We studied the adsorption of O₂ on these reported structures using the B3LYP theory with relatively large basis sets. The theoretical results indicate that the adsorption sites as well as the adsorption energies of O₂ on AgAu_n-1^- (n = 3-10) are nearly identical to those on the corresponding Au_n^- (n = 3-10). The O₂ adsorption on a series of proposed isomers of AgAu_n-1^- (denoted as Au_n-1Ag^-), in which the silver atom was on the protruding site, was explored using the same theoretical methods. The O₂ tends to bond with the protruding Ag atoms, and the binding energies are apparently higher than those on the corresponding Au_n^- and AgAu_n-1^-. The adsorption and activation of O₂ on Au_n^-, AgAu_n-1^-, and Au_n-1Ag^- were correlated with their global electron detachment energies (VDEs) as well as the element types of the adsorption sites. Generally, low VDE values and silver sites facilitate the O₂ adsorption, and these two factors separately dominate in various cluster species. The revealed effects of a doping silver atom in small gold clusters are helpful to understand the role of the residual silver components in many nano gold catalysts.

Effect of the Metal Deposition Order on Structural, Electronic and Catalytic Properties of TiO2-Supported Bimetallic Au-Ag Catalysts in 1-Octanol Selective Oxidation

Au and Ag were deposited on TiO2 modified with Ce, La, Fe or Mg in order to obtain bimetallic catalysts to be used for liquid-phase oxidation of 1-octanol. The effects of the deposition order of gold and silver, and the nature of the support modifying additives and redox pretreatments on the catalytic properties of the bimetallic Au-Ag catalysts were studied. Catalysts were characterized by low-temperature nitrogen adsorption–desorption, energy dispersive spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy and ultraviolet-visible diffuse reflectance spectroscopy. It was found that pretreatments with hydrogen and oxygen at 300 °C significantly decreased the activity of AuAg catalysts (silver was deposited first) and had little effect on the catalytic properties of AgAu samples (gold was deposited first). The density functional theory method demonstrated that the adsorption energy of 1-octanol increased for all positively charged AuxAgyq (x + y = 10, with a charge of q = 0 or +1) clusters compared with the neutral counterparts. Lanthanum oxide was a very effective promoter for both monometallic and bimetallic gold and silver catalysts in the studied process.

Direct and Broadband Plasmonic Charge Transfer to Enhance Water Oxidation on a Gold Electrode

Plasmonic photocatalysis via hot charge carriers suffers from their short lifetime compared with the sluggish kinetics of most reactions. To increase lifetime, adsorbates on the surface of a plasmonic metal may create preferential states for electrons to be excited from. We demonstrate this effect with O adsorbates on a nanoporous gold electrode. Nanoporous gold is used to obtain a broadband optical response, to increase the obtained photocurrent, and to provide a SERS-active substrate. Only with adsorbates present, we observe significant photocurrents. Illumination also increases the adsorbate coverage above its dark potential-dependent equilibrium, as derived from a two-laser in situ SERS approach. Density functional theory calculations confirm the appearance of excitable states below the Fermi level. The photocurrent enhancement and broadband characteristics reveal the potential of the plasmonic approach to improve the efficiency of photoelectrochemical water splitting.

Dealloyed porous gold anchored by in situ generated graphene sheets as high activity catalyst for methanol electro-oxidation reaction

A novel one-step method to prepare the nanocomposites of reduced graphene oxide (RGO)/nanoporous gold (NPG) is realized by chemically dealloying an Al₂Au precursor. The RGO nanosheets anchored on the surface of NPG have a cicada wing like shape and act as both conductive agent and buffer layer to improve the catalytic ability of NPG for methanol electro-oxidation reaction (MOR). This improvement can also be ascribed to the microstructure change of NPG in dealloying with RGO. This work inspires a facile and economic method to prepare the NPG based catalyst for MOR.

A novel one-step method to prepare the nanocomposites of reduced graphene oxide (RGO)/nanoporous gold (NPG) is realized by chemically dealloying an Al₂Au precursor.

Aerobic Methanol Oxidation over Unsupported Nanoporous Gold: The Influence of an Added Base

We studied the aerobic oxidation of methanol over nanoporous gold catalysts under neutral and alkaline conditions. We find that under neutral conditions the catalyst has an activation period of about 10 h while upon addition of a base the catalyst becomes active right away. After this activation period, however, the activity of the catalyst is in both cases similar. Moreover, the selectivity was not affected by the base. We tested different bases and found the largest effect when adding OH−. The cation, however, does not play a role. We conclude that it is OH−, which is impacting the reaction and propose a mechanism for the suppression of the activation period. While the catalytic cycle, i.e., the reaction of methanol on the catalyst surface seems unaffected, the transient adsorption of OH− onto the surface can facilitate the activation of molecular oxygen by donating electrons to the surface. Due to the intermediate formation of oxidic Ag species, an effective segregation of surface-near Ag can be induced, which increases the abundance of Ag being essential for the activation of oxygen at the surface. In this way, a more efficient pathway for the generation of active oxygen is opened, allowing the reaction to set in faster.

Independent control over residual silver content of nanoporous gold by galvanodynamically controlled dealloying

A new procedure was developed and characterized for the galvanodynamically controlled dealloying (GCD) of AuxAg100-x alloys to obtain nanoporous gold (npAu) mainly as an unsupported catalyst material for partial oxidation of alcohols. Such catalysts require residual Ag content of less than 1 at%. GCD was compared to the preparation of npAu by potentiostatically controlled deallyoing (PCD) and free corrosion (FC). The main advantage of GCD is the ability to obtain npAu with a predetermined residual Ag content including residual Ag contents below 1 at% while retarding the coarsening of the ligaments. For PCD and FC, there is a strong increase of ligament size with decreasing residual Ag content because the longer times required for dealloying unavoidably lead to coarsening of the npAu structure. On the other hand, GCD also prevented too high initial current density that leads to cracking of the samples and prevents formation of mechanically stable monoliths. GCD tolerates different compositions of the starting alloy for AuxAg100-x within the tested composition range (20 at% ≤ xAu ≤ 30 at%). The samples obtained by GCD were tested for methanol and ethanol oxidation and showed favorable characteristics for partial oxidation of methanol to methyl formate and of ethanol to ethyl acetate.

Self-activated surface dynamics in gold catalysts under reaction environments

Nanoporous gold (NPG) with sponge-like structures has been studied by atomic-scale and microsecond-resolution environmental transmission electron microscopy (ETEM) combined with ab initio energy calculations. Peculiar surface dynamics were found in the reaction environment for the oxidation of CO at room temperature, involving residual silver in the NPG leaves as well as gold and oxygen atoms, especially on {110} facets. The NPG is thus classified as a novel self-activating catalyst. The essential structure unit for catalytic activity was identified as Au–AgO surface clusters, implying that the NPG is regarded as a nano-structured silver oxide catalyst supported on the matrix of NPG, or an inverse catalyst of a supported gold nanoparticulate (AuNP) catalyst. Hence, the catalytically active structure in the gold catalysts (supported AuNP and NPG catalysts) can now be experimentally unified in low-temperature CO oxidation, a step forward towards elucidating the fascinating catalysis mechanism of gold.

Nanoporous gold (NPG) has gained significant attention, but its catalytically active structure has not yet been clarified. Here, the authors identify the catalytically active and dynamic structure in NPG by combining atomic-scale and microsecond-resolution environmental transmission electron microscopy with ab initio calculations.

Active site densities, oxygen activation and adsorbed reactive oxygen in alcohol activation on npAu catalysts

The activation of molecular O2 as well as the reactivity of adsorbed oxygen species is of central importance in aerobic selective oxidation chemistry on Au-based catalysts. Herein, we address the issue of O2 activation on unsupported nanoporous gold (npAu) catalysts by applying a transient pressure technique, a temporal analysis of products (TAP) reactor, to measure the saturation coverage of atomic oxygen, its collisional dissociation probability, the activation barrier for O2 dissociation, and the facility with which adsorbed O species activate methanol, the initial step in the catalytic cycle of esterification. The results from these experiments indicate that molecular O2 dissociation is associated with surface silver, that the density of reactive sites is quite low, that adsorbed oxygen atoms do not spill over from the sites of activation onto the surrounding surface, and that methanol reacts quite facilely with the adsorbed oxygen atoms. In addition, the O species from O2 dissociation exhibits reactivity for the selective oxidation of methanol but not for CO. The TAP experiments also revealed that the surface of the npAu catalyst is saturated with adsorbed O under steady state reaction conditions, at least for the pulse reaction.

CO adsorption and oxygen activation on group 11 nanoparticles – a combined DFT and high level CCSD(T) study about size effects and activation processes

The focus of this study lies in the activation of molecular oxygen and reaction with CO within density functional theory (DFT) and high level CCSD(T) calculations.

Electrocatalytic methanol oxidation with nanoporous gold: microstructure and selectivity

The properties of Nanoporous Gold (NPG) obtained by the selective dissolution of Ag from an Au-Ag alloy can be tuned by the details of its fabrication, and specifically the residual Ag content is correlated to the ligament size of the material. We link this correlation to methanol electro-oxidation. Specifically, two different NPG types (obtained by potentiostatic dealloying) are compared with one obtained by free corrosion. They show remarkable differences in activity. Quantitative product analysis reveals that NPG shows nearly selective oxidation of CH₃OH to HCOO^- when NPG is used as an active electrode in contrast to planar Au. This trend can further be enhanced when applying finer nanoporous structures that are linked to a higher Ag content. X-ray photoelectron spectroscopy (XPS) reveals changes in the nature of residual Ag from which we conclude that Ag is not a passive component in the methanol oxidation process.

Effect of nanoscale flows on the surface structure of nanoporous catalysts

The surface structure and composition of a multi-component catalyst are critical factors in determining its catalytic performance. The surface composition can depend on the local pressure of the reacting species, leading to the possibility that the flow through a nanoporous catalyst can affect its structure and reactivity. Here, we explore this possibility for oxidation reactions on nanoporous gold, an AgAu bimetallic catalyst. We use microscopy and digital reconstruction to obtain the morphology of a two-dimensional slice of a nanoporous gold sample. Using lattice Boltzmann fluid dynamics simulations along with thermodynamic models based on first-principles total-energy calculations, we show that some sections of this sample have low local O2 partial pressures when exposed to reaction conditions, which leads to a pure Au surface in these regions, instead of the active bimetallic AgAu phase. We also explore the effect of temperature on the surface structure and find that moderate temperatures (≈300-450 K) should result in the highest intrinsic catalytic performance, in apparent agreement with experimental results.

Redox titration of gold and platinum surface oxides at porous microelectrodes

Cavity-microelectrodes were used to investigate surface oxides on supported platinum nanoparticles and nanoporous gold with the surface interrogation mode of scanning electrochemical microscopy.

Atomically dispersed supported metal catalysts: perspectives and suggestions for future research

Catalysts consisting of metal atoms that are atomically dispersed on supports are gaining wide attention because of the rapidly developing understanding of their structures and functions and the discovery of new, stable catalysts with new properties.

How silver segregation stabilizes 1D surface gold oxide: a cluster expansion study combined with ab initio MD simulations

Gold surprises us again by the unusual stability of one-dimensional gold oxide structures supported on bimetallic surfaces of gold and silver.

Residual Silver Remarkably Enhances Electrocatalytic Activity and Durability of Dealloyed Gold Nanosponge Particles

Percolation dealloying of multimetallic alloys entangles the selective dissolution of the less-noble elements with nanoscale restructuring of the more-noble components, resulting in the formation of spongelike, nanoporous architectures with a unique set of structural characteristics highly desirable for heterogeneous catalysis. Although the dealloyed nanoporous materials are compositionally dominated by the more-noble elements, they inevitably contain residual less-noble elements that cannot be completely removed through the percolation dealloying process. How to employ the less-noble elements to rationally guide the structural evolution and optimize the catalytic performances of the dealloyed noble metal nanocatalysts still remains largely unexplored. Here, we have discovered that incorporation of Ag into Au-Cu binary alloy nanoparticles substantially enhances the Cu leaching kinetics while effectively suppressing the ligament coarsening during the nanoporosity-evolving percolation dealloying of the alloy nanoparticles. The controlled coleaching of Ag and Cu from Au-Ag-Cu ternary alloy nanoparticles provides a unique way to optimize both the surface area-to-mass ratios and specific activities of the dealloyed nanosponge particles for the electrocatalytic oxidation of alcohols. The residual Ag in the fully dealloyed nanosponge particles plays crucial roles in stabilizing the surface active sites and maintaining the nanoporous architectures during the electrocatalytic reactions, thereby greatly enhancing the durability of the electrocatalysts. The insights gained from this work shed light on the underlying roles of residual less-noble elements that are crucial to the rational optimization of electrocatalysis on noble-metal nanostructures.

Catalyst design for enhanced sustainability through fundamental surface chemistry

Decreasing energy consumption in the production of platform chemicals is necessary to improve the sustainability of the chemical industry, which is the largest consumer of delivered energy. The majority of industrial chemical transformations rely on catalysts, and therefore designing new materials that catalyse the production of important chemicals via more selective and energy-efficient processes is a promising pathway to reducing energy use by the chemical industry. Efficiently designing new catalysts benefits from an integrated approach involving fundamental experimental studies and theoretical modelling in addition to evaluation of materials under working catalytic conditions. In this review, we outline this approach in the context of a particular catalyst-nanoporous gold (npAu)-which is an unsupported, dilute AgAu alloy catalyst that is highly active for the selective oxidative transformation of alcohols. Fundamental surface science studies on Au single crystals and AgAu thin-film alloys in combination with theoretical modelling were used to identify the principles which define the reactivity of npAu and subsequently enabled prediction of new reactive pathways on this material. Specifically, weak van der Waals interactions are key to the selectivity of Au materials, including npAu. We also briefly describe other systems in which this integrated approach was applied.

Spin and structural features of oxygen dissociation on tetrahedral Ag20 and Ag19Au clusters

The spin-crossing mechanism of oxygen dissociation on Ag₂₀ and monodoped Ag₁₉Au clusters was investigated using spin-polarized scalar-relativistic DFT. The activation energy decreases by 11–29 kJ mol⁻¹ relative to that for the spin-conserving pathway.

Controlling O coverage and stability by alloying Au and Ag

Alloying Au into Ag(110) reduces the O coverage and stability in a well-controlled manner.

Carbon-Free Cathodes: A Step Forward in the Development of Stable Lithium-Oxygen Batteries

Lithium-oxygen (Li-O2 ) batteries are receiving considerable interest owing to their potential for higher energy densities than current Li-ion systems. However, the lack stability of carbon-based oxygen electrodes is believed to promote carbonate formation leading to capacity fade and limiting the cycling performance of the battery. To improve the stability and cyclability of these systems, alternative electrode materials are required. Metal oxides are mainly utilized at low current densities, whereas noble metals show outstanding performance at high current densities. Carbides appear to provide a good compromise between electrochemical performance and cost, which makes them interesting materials for further investigations. Here, a critical review of current carbon-free electrode research is provided with the goal of identifying routes to its successful optimization.

Nanocatalysts Fabricated by a Dealloying Method

Two types of nanomaterials with different morphologies are described in this article: nanoporous metals and titanate nanowires. Both materials are fabricated by a dealloying method. In the former case, the catalytic properties of nanoporous gold and palladium are exemplified by many chemical transformations. The reactions proceed without any support, stabilizer, or ligands. The catalyst can be easily recovered by a simple separation process and reused many times without significant loss of catalytic activity. In the latter case, the dealloying of Ti-Al alloy is described as a new fabrication method for producing ultrafine titanate nanowires. This method does not require high-temperature conditions, which is advantageous for the construction of fine structures. The key to this process is achieving a fine dispersion of intermetallic TiAl3 nanocrystals in the Al matrix in the mother alloy. The resulting nanowires exhibit remarkable Sr(2+) ion-exchange properties.

The atomistic origin of the extraordinary oxygen reduction activity of Pt3Ni7 fuel cell catalysts

Recently Debe et al. reported that Pt3Ni7 leads to extraordinary Oxygen Reduction Reaction (ORR) activity. However, several reports show that hardly any Ni remains in the layers of the catalysts close to the surface ("Pt-skin effect"). This paradox that Ni is essential to the high catalytic activity with the peak ORR activity at Pt3Ni7 while little or no Ni remains close to the surface is explained here using large-scale first-principles-based simulations. We make the radical assumption that processing Pt-Ni catalysts under ORR conditions would leach out all Ni accessible to the solvent. To simulate this process we use the ReaxFF reactive force field, starting with random alloy particles ranging from 50% Ni to 90% Ni and containing up to ∼300 000 atoms, deleting the Ni atoms, and equilibrating the resulting structures. We find that the Pt3Ni7 case and a final particle radius around 7.5 nm lead to internal voids in communication with the exterior, doubling the external surface footprint, in fair agreement with experiment. Then we examine the surface character of these nanoporous systems and find that a prominent feature in the surface of the de-alloyed particles is a rhombic structure involving 4 surface atoms which is crystalline-like but under-coordinated. Using density-functional theory, we calculate the energy barriers of ORR steps on Pt nanoporous catalysts, focusing on the Oad-hydration reaction (Oad + H2Oad → OHad + OHad) but including the barriers of O2 dissociation (O2ad → Oad + Oad) and water formation (OHad + Had → H2Oad). We find that the reaction barrier for the Oad-hydration rate-determining-step is reduced significantly on the de-alloyed surface sites compared to Pt(111). Moreover we find that these active sites are prevalent on the surface of particles de-alloyed from a Pt-Ni 30 : 70 initial composition. These simulations explain the peak in surface reactivity at Pt3Ni7, and provide a rational guide to use for further optimization of improved catalytic and nanoporous materials.

Correlation of the structure and applications of dealloyed nanoporous metals in catalysis and energy conversion/storage

Nanoporous metals produced by dealloying have shown great promise in many areas such as catalysis/electrocatalysis, energy conversion/storage, sensing/biosensing, actuation, and surface-enhanced Raman scattering. Particularly, nanoscale metal ligaments with high electronic conductivity, tunable size and rich surface chemistry make nanoporous metals very promising as catalysts/electrocatalysts for energy conversion applications such as fuel cells and also as versatile three-dimensional substrates for energy-storage in supercapacitors and lithium ion batteries. In this review, we focus on the recent developments of dealloyed nanoporous metals in both catalysis/electrocatalysis and energy storage. In particular, based on the state-of-the-art electron microscopy characterization, we explain the atomic origin of the high catalytic activity of nanoporous gold. We also highlight the recent advances in rationally designing nanoporous metal-based composites and hierarchical structures for enhanced energy storage. Finally, we conclude with some outlook and perspectives with respect to future research on dealloyed nanoporous metals in catalysis- and energy-related applications.

Methyl ester synthesis catalyzed by nanoporous gold: from 10−9 Torr to 1 atm

Highly selective synthesis of methyl esters can be achieved by oxidative coupling of methanol and aldehydes (acetaldehyde, butyraldehyde) under mild conditions using unsupported nanoporous gold catalysts over a wide pressure range (from 10⁻⁹ Torr to 1 atm).

Catalysis by unsupported skeletal gold catalysts

Catalysis is one of the key technologies for the 21st century for achieving the required sustainability of chemical processes. Critical improvements are based on the development of new catalysts and catalytic concepts. In this context, gold holds great promise because it is more active and selective than other precious metal catalysts at low temperatures. However, gold becomes only chemically and catalytically active when it is nanostructured. Since the 1970s and 1980s, the first type of gold catalysts that chemists studied were small nanoparticles on oxidic supports. With the later onset of nanotechnology, a variety of nanostructured materials not requiring a support or organic stabilizers became available within about the last 10 years. Among these are gold nanofoams generated by combustion of gold compounds, nanotube membranes prepared by electroless deposition of gold inside a template, and corrosion-derived nanoporous gold. Even though these materials are macroscopic in their geometric dimensions (e.g., disks, cubes, and membranes with dimensions of millimeters), they are comprised of gold nanostructures, for example, in the form of ligaments as small as 15 nm in diameter (nanoporous gold, npAu). The nanostructure brings about a high surface to volume ratio and a large fraction of low coordinated surface atoms. In this Account, we discuss how unsupported materials are active catalysts for aerobic oxidation reaction in gas phase (oxidation of CO and primary alcohols), as well as liquid phase oxidation and reduction reactions. It turns out that the bonding and activation of molecular oxygen for gas phase oxidations strongly profits from trace amounts of an ad-metal residue such as silver. It is noteworthy that these catalysts still exhibit the special gold type chemistry, characterized by activity at very low temperatures and high selectivity for partial oxidations. For example, we can oxidize CO over these unsupported catalysts (npAu, nanotubes, and powder) at temperatures well below water's freezing point (-30 °C) and with turnover frequencies up to 0.5 s(-1) (at 30 °C). Yet, we can anticipate the surface chemistry of these unsupported and extended gold surfaces based on model experiments under UHV conditions. We have demonstrated this for the selective oxidation of primary alcohols at low temperatures employing npAu catalysts. Chemists have paid growing interest to oxidation and reduction reactions in liquid phase catalysis, most suitable for synthetic organic chemistry. Early work on the aerobic oxidation of d-glucose in 2008 using Raney type npAu already showed the potential of this type of catalyst for liquid phase reactions. Since then, researchers have investigated further oxidation reactions (silanes to silanols) and reduction reactions of alkynes, as well as C-C coupling reactions ([4 + 2] benzannulation) and azo compound decomposition, with likely several more reactions to be reported in the next years. The advantage of this unsupported skeletal type of catalyst is its recyclability and retrievability without leaching of gold into the reaction medium, owing to its monolithic structure. Even though these materials contain nanoscopic structures, they are macroscopic in their geometric dimensions and pose no threat to the environment or health as discussed for other nanomaterials.