Fluorescence enhancement of benzimidazolium derivative on clay nanosheets by surface-fixation induced emission (S-FIE)

The photophysical behaviors of benzimidazolium derivative [4-(1,3-dimethylbenzimidazol-3-imu-2-yl)-N, N-diphenylaniline (2-(4-(diphenylamino)phenyl)-1,3-dimethyl-1H-benzo[d]imidazol-3-ium)] (BID) in water, organic solvents and on synthetic saponite were investigated. The fluorescence quantum yield (Φf) of BID was 0.91 on the saponite surface under the optimal condition, while that in water was 0.010. Such fluorescence enhancement on the inorganic surface is called "surface-fixation induced emission (S-FIE)". This fluorescence enhancement ratio for BID is significantly high compared to that of conventional S-FIE active dyes. From the values of Φf and the excited lifetime, the non-radiative deactivation rate constant (knr) and radiative deactivation rate constant (kf) of BID on the saponite surface and in water were determined. Results showed that the factors for fluorescence enhancement were both the increase of kf and the decrease of knr on the saponite surface; especially, knr decreased by more than two orders due to the effect of nanosheets.

MXenes vs. clays: emerging and traditional 2D layered nanoarchitectonics

Although MXene materials are considered an emerging research topic, they are receiving considerable interest because, like metals and graphene, they are good electronic conductors but with the particularity that they have a marked hydrophilic character. Having a structural organization and properties close to those of clay minerals (natural silicates typically with a lamellar morphology), they are sometimes referred to as "conducting clays" and exhibit colloidal, surface and intercalation properties also similar to those of clay minerals. The present contribution aims to inform and discuss the nature of MXenes in comparison with clay phyllosilicates, taking into account their structural analogies, outstanding surface properties and advanced applications. The current in-depth understanding of clay minerals may represent a basis for the future development of MXene-derived nanoarchitectures. Comparative examples of the preparation, and studies on the properties and applications of various nanoarchitectures based on clays and MXenes have been included in the present work.

Magnetite-sepiolite nanoarchitectonics for improving zein-based bionanocomposite foams

Magnetic nanoarchitectures have been used to introduce multifunctionality in biopolymeric matrices. Bionanocomposite foams based on the corn protein zein were prepared for the first time using the hydrophobic properties of zein in a sequential treatment consisting of the removal of ethanol-soluble fractions, followed by the water swelling of the remaining phase and a further freeze-drying process. When this protocol is applied to zein pellets, they can be consolidated as porous monoliths. Moreover, it is possible to incorporate diverse types of inorganic nanoparticles in the starting pellet to produce the bionanocomposite foams. In particular, the preparation of superparamagnetic foams has been explored using two approaches: the direct incorporation of magnetite nanoparticles in a ferrofluid by impregnation in the foams, and the application of the foaming process to mixtures of zein with magnetite nanoparticles alone or previously assembled into sepiolite clay fibers. The first methodology leads to the production of inhomogeneous foams, while the use of magnetite nanoparticles and better Fe3O4-sepiolite nanoarchitectured materials as fillers results in more homogeneous materials with improved water stability and mechanical properties, offering superparamagnetic behavior. The resulting multifunctional foams have been tested in adsorption processes using the herbicide 4-chloro-2-methylphenoxyacetic acid as a model pollutant, confirming their potential utility in decontamination applications in open waters as they can be easily recovered from the aqueous medium using a magnet.

Effect of the combined addition of ultrasonicated kraft lignin and montmorillonite on hydroxypropyl methylcellulose bionanocomposites

Although hydroxypropyl methylcellulose (HPMC) has been proposed as renewable substitute for traditional plastic, its barrier and active properties need to be improved. Thus, the combination of an organic residue such as kraft lignin (0-10% w/w) and a natural clay such as montmorillonite (3% w/w) by application of ultrasound can significantly improve HPMC properties. This is most likely due to the close interaction between lignin and montmorillonite, which leads to delamination of the clay and improves its dispersion within the HPMC matrix. Specifically, the addition of kraft lignin to the bionanocomposite films provided them with UV-shielding, antioxidant capacity and antibacterial activity. The incorporation of 3% montmorillonite resulted in reductions of 65.8% and 11.4% in oxygen (OP) and water vapor permeabilities (WVP), respectively. Moreover, a reduction of 43.8% in WVP was achieved when both lignin (1%) and montmorillonite (3%) were incorporated, observing a synergistic effect. Thus, the HPMC bionanocomposite with 1% lignin and 3% montmorillonite, presented good thermal stability and mechanical strength with significantly improved gas barrier permeability, as well as UV-shielding (maintaining a good transparency), antioxidant and antibacterial activities.

Acceleration of the Dehydrogenation of d-Glucose to 2-Keto-d-gluconate in Aqueous Amino Acid via Hydrated Stacked Clay Nanosheets

The assembly of discrete active species to form periodical nanostructures is essential in realizing low-cost artificial enzymes that mimic natural enzymatic functions in extraordinary bio(chemo)selective reactions. In this study, we developed artificial bifunctional glucose/gluconic acid dehydrogenase from naturally abundant resources: l-aspartic acid (Asp) and montmorillonite (a subgroup of smectite natural clay minerals). β-d-Glucose (Glc) was dehydrogenated to 2-keto-d-gluconate (2-KGA) at 25 and 30 °C in an aqueous acidic solution (pH = 3, 4, and 5). The reaction involved sequential steps that yielded d-gluconic acid (GA) as an intermediate. The second step of the dehydrogenation (GA to 2-KGA) occurred at a higher rate than the first (Glc to GA), which is comparable to the natural process. A negatively charged carboxylate in Asp was required for the dehydrogenation, which donates an electron pair (COO:^-) to the hydroxyl group bonded to the C(1)-position of Glc. The acidic sites in clay served as coenzymatic sites (electron acceptor), promoting the Glc dehydrogenation as the Glc reduced by Asp approached the clay coenzymatic sites. The active coenzymatic structures were developed in 48 h (induction period) through the rearrangement of the adsorbed Asp and Glc molecules on montmorillonite in water (intermediate structure). The spontaneous assembling of the intermediate structures facilitated the one-pot dehydrogenation of Glc to 2-KGA via periodic "hydrated stacked layers" comprising clay nanosheets, Asp, and Glc. The facile synthetic route proposed here is inexpensive and would be beneficial without using both GDH and GADH enzymes bound to a cell membrane.

Supramolecular assemblies of organo-functionalised hybrid polyoxometalates: from functional building blocks to hierarchical nanomaterials

This review provides a comprehensive overview of recent advances in the supramolecular organisation and hierarchical self-assembly of organo-functionalised hybrid polyoxometalates (hereafter referred to as hybrid POMs), and their emerging role as multi-functional building blocks in the construction of new nanomaterials. Polyoxometalates have long been studied as a fascinating outgrowth of traditional metal-oxide chemistry, where the unusual position they occupy between individual metal oxoanions and solid-state bulk oxides imbues them with a range of attractive properties (e.g. solubility, high structural modularity and tuneable properties/reactivity). Specifically, the capacity for POMs to be covalently coupled to an effectively limitless range of organic moieties has opened exciting new avenues in their rational design, while the combination of distinct organic and inorganic components facilitates the formation of complex molecular architectures and the emergence of new, unique functionalities. Here, we present a detailed discussion of the design opportunities afforded by hybrid POMs, where fine control over their size, topology and their covalent and non-covalent interactions with a range of other species and/or substrates makes them ideal building blocks in the assembly of a broad range of supramolecular hybrid nanomaterials. We review both direct self-assembly approaches (encompassing both solution and solid-state approaches) and the non-covalent interactions of hybrid POMs with a range of suitable substrates (including cavitands, carbon nanotubes and biological systems), while giving key consideration to the underlying driving forces in each case. Ultimately, this review aims to demonstrate the enormous potential that the rational assembly of hybrid POM clusters shows for the development of next-generation nanomaterials with applications in areas as diverse as catalysis, energy-storage and molecular biology, while providing our perspective on where the next major developments in the field may emerge.

Dopamine-Mediated Biomineralization of Calcium Phosphate as a Strategy to Facilely Synthesize Functionalized Hybrids

Organic-inorganic hybrid materials have been considered to be promising carriers or immobilization matrixes for biomolecules due to their high efficiency and significantly enhanced activities and stabilities of biomolecules. Here, the well-defined dopamine/calcium phosphate organic-inorganic hybrids (DACaPMFs) are fabricated via one-pot dopamine-mediated biomineralization, and their structure and properties are also characterized. Direct stochastic optical reconstruction microscopy (dSTORM) is first used to probe the distribution of organic components in these hybrids. Combined with spectroscopic data, the direct observation of dopamine in the hybrids helps to understand the formation of a physical chemistry mechanism of the biomineralization. The obtained DACaPMFs with multiple-level pores allow the loading of doxorubicin with a high loading efficiency and a pH-responsive property. Furthermore, thrombin is entrapped by the hybrids to prove the controlled release. It is expected that such organic-inorganic hybrid materials may hold great promise for application in drug delivery as well as scaffold materials in bone tissue engineering and hemostatic material.

High-Temperature Resistant Polyborosilazanes with Tailored Structures

Boron-containing organosilicon polymers are widely used under harsh environments as preceramic polymers for advanced ceramics fabrication. However, harmful chemicals released during synthesis and the complex synthesis routes have limited their applications. To solve the problems, a two-component route was adopted to synthesize cross-linked boron-containing silicone polymer (CPBCS) via a solventless process. The boron content and CPBCSs’ polymeric structures could be readily tuned through controlling the ratio of multifunctional boron hybrid silazane monomers (BSZ12) and poly[imino(methylsilylene)]. The CPBCSs showed high thermal stability and good mechanical properties. The CPBCS with Si-H/C=C ratio of 10:1 showed 75 wt% char yields at 1000 °C in argon, and the heat release capacity (HRC) and total heat release (THR) are determined to be 37.9 J/g K and 6.2 KJ/g, demonstrating high thermal stability and flame retardancy. The reduced modulus and hardness of CPBCS are 0.30 GPa and 2.32 GPa, respectively. The novel polysilazanes can be potentially used under harsh environments, such as high temperatures or fire hazards.

Pickering Emulsions Based on Wax and Halloysite Nanotubes: An Ecofriendly Protocol for the Treatment of Archeological Woods

A novel green protocol for the consolidation and protection of waterlogged archeological woods with wax microparticles has been designed. First, we focused on the development of halloysite nanotubes (HNTs) based Pickering emulsions using wax as the inner phase of the oil-in-water droplets. The optimization of the preparation strategy was supported by both optical microscopy and scanning electron microscopy, which allowed us to show the morphological features of the prepared hybrid systems and their structural properties, i.e., the distribution of the clay at the interface. Also, the dependence of the overall dimensions of the prepared systems on the halloysite content was demonstrated. Microdifferential scanning calorimetry (μ-DSC) was conducted in order to assess whether the thermal properties of the wax are affected after its interaction with HNTs. Then, the Pickering emulsions were employed for the treatment of waterlogged wooden samples. Compared to the archeological woods treated with pure wax, the addition of nanotubes induced a remarkable improvement in the mechanical performance in terms of stiffness and flexural strength. The proposed protocol is environmentally friendly since water is the only solvent used throughout the entire procedure, even if wax is vehiculated into the pores at room temperature. As a consequence, the design of wax/halloysite Pickering emulsions represents a promising strategy for the preservation of wooden artworks, and it has a great potential to be scaled up, thus becoming also exploitable for the treatments of shipwrecks of large size.

Designing nanoarchitecture for environmental remediation based on the clay minerals as building block

Nanoarchitecture of hybrids materials based on clay minerals as nano building blocks for the environmental remediation is summarized with the emphasis on the utilization of layered clay minerals, especially smectite group of clay minerals, as nano building blocks for designing functional nanostructures for the adsorption of molecular contaminants from the environments. Smectites are well-known adsorbents of cationic contaminants, while surface modification of smectites with organoammonium ions has given hydrophobic and microporous characters to uptake nonionic organic contaminants from environments. Not only on the designed interactions between adsorbent-adsorbate for efficient and higher capacity adsorption, the states of the adsorbed nonionic organic compounds have been altered and varied by the modification of smectites as shown by the controlled release and specific catalytic reactions. The organically modified clays are classified from the nanoarchitecture, and the functions derived from the nanoarchitectures are discussed based on the structure-property relationship.

Lipid-based mesophases as matrices for nanoscale reactions

Lipidic mesophases are versatile bioorganic materials that have been effectively employed as nanoscale matrices for membrane protein crystallization, drug delivery and as food emulsifiers over the last 30 years. In this review, the focus is upon studies that have employed non-lamellar lipid mesophases as matrices for organic, inorganic and enzymatic reactions. The ability of lipidic mesophases to incorporate hydrophilic, amphiphilic and hydrophobic molecules, together with the high interfacial area of the lipidic cubic and inverse hexagonal phases has been exploited in heterogeneous catalysis as well as for enzyme immobilization. The unique nanostructure of these mesophases is the driving force behind their ability to act as templates for synthesis, resulting in the creation of highly ordered polymeric and inorganic materials with complex geometries.

Exploration of Chitinous Scaffold-Based Interfaces for Glucose Sensing Assemblies

: The nanomaterial-integrated chitinous polymers have promoted the technological advancements in personal health care apparatus, particularly for enzyme-based devices like the glucometer. Chitin and chitosan, being natural biopolymers, have attracted great attention in the field of biocatalysts engineering. Their remarkable tunable properties have been explored for enhancing enzyme performance and biosensor advancements. Currently, incorporation of nanomaterials in chitin and chitosan-based biosensors are also widely exploited for enzyme stability and interference-free detection. Therefore, in this review, we focus on various innovative multi-faceted strategies used for the fabrication of biological assemblies using chitinous biomaterial interface. We aim to summarize the current development on chitin/chitosan and their nano-architecture scaffolds for interdisciplinary biosensor research, especially for analytes like glucose. This review article will be useful for understanding the overall multifunctional aspects and progress of chitin and chitosan-based polysaccharides in the food, biomedical, pharmaceutical, environmental, and other diverse applications.

Preferential immobilization of size-controlled anatase nanoparticles in mesopores

Precise structural design of a host-guest complex was carried out from the aspects of the size and the location of the guest (anatase particles), and the remaining open space of the host (mesoporous silica). The size of the anatase particles was successfully controlled (3, 5 and 8 nm) during the preparation, and the size-controlled nanoparticles were preferentially encapsulated into the mesopores with a diameter of 8 nm. Due to the precise control of the anatase particles, size dependent photoluminescence of the anatase quantum dots was observed for the first time. The change in the porosity of the mesoporous silica by the immobilization of the anatase in the pore was followed to find a systematic variation of the porosity corresponding to the loaded anatase amount. This correlation can be useful to estimate the location of the guest in/on the host for the host-guest hybrids.

Current Biomedical Applications of 3D Printing and Additive Manufacturing

Additive manufacturing (AM) has emerged over the past four decades as a cost-effective, on-demand modality for fabrication of geometrically complex objects. The ability to design and print virtually any object shape using a diverse array of materials, such as metals, polymers, ceramics and bioinks, has allowed for the adoption of this technology for biomedical applications in both research and clinical settings. Current advancements in tissue engineering and regeneration, therapeutic delivery, medical device fabrication and operative management planning ensure that AM will continue to play an increasingly important role in the future of healthcare. In this review, we outline current biomedical applications of common AM techniques and materials.

Nanoengineered Sorbents To Increase the Persistence of the Allelochemical Carvone in the Rhizosphere

This study investigates the changes in sorption/desorption, dissipation, and leaching of the two enantiomeric forms of the allelochemical carvone, R-carvone and S-carvone, after amending an agricultural soil sample with two nanoengineered sorbents: biochar (BC) and organoclay (OCl). The sorption of carvone enantiomers was nonenantioselective and similarly improved by the addition of OCl and BC to the soil. However, OCl-amended soil showed reversible sorption, whereas BC-amended soil displayed sorption-desorption hysteresis. Dissipation of carvone enantiomers was enantioselective. Both amendments increased the half-life of the enantiomers in the soil. This effect was more pronounced for BC-amended soil and for S-carvone. Leaching of R- and S-carvone through soil columns was scarce in unamended soil (<7%), due to their rapid degradation during leaching, and null for OCl- and BC-amended soil, for which much of the applied R- and S-carvone remained in the top 0-5 cm of the amended soil layer. Addition of biochars and organoclays could help increase the persistence of carvone enantiomers in the rhizosphere, which may favor their use as residual pest-management substances.

Photoactive nanoarchitectures based on clays incorporating TiO2 and ZnO nanoparticles

Thought as raw materials clay minerals are often disregarded in the development of advanced materials. However, clays of natural and synthetic origin constitute excellent platforms for developing nanostructured functional materials for numerous applications. They can be easily assembled to diverse types of nanoparticles provided with magnetic, electronic, photoactive or bioactive properties, allowing to overcome drawbacks of other types of substrates in the design of functional nanoarchitectures. Within this scope, clays can be of special relevance in the production of photoactive materials as they offer an advantageous way for the stabilization and immobilization of diverse metal-oxide nanoparticles. The controlled assembly under mild conditions of titanium dioxide and zinc oxide nanoparticles with clay minerals to give diverse clay-semiconductor nanoarchitectures are summarized and critically discussed in this review article. The possibility to use clay minerals as starting components showing different morphologies, such as layered, fibrous, or tubular morphologies, to immobilize these types of nanoparticles mainly plays a role in i) the control of their size and size distribution on the solid surface, ii) the mitigation or suppression of the nanoparticle aggregation, and iii) the hierarchical design for selectivity enhancements in the catalytic transformation and for improved overall reaction efficiency. This article tries also to present new steps towards more sophisticated but efficient and highly selective functional nanoarchitectures incorporating photosensitizer elements for tuning the semiconductor-clay photoactivity.

Layered Silicates as a Possible Drug Carrier

The potential of layered silicates as drug carrier is overviewed. Due to their large surface area and expandable interlayer space to accommodate drug molecules, layered silicates have a potential as carrier of various molecules. In addition to the electrostatic interactions between negatively charged layered silicates and positively charged drug molecules, the organic modification of the surface of layered silicates has been applied to accommodate a variety of drug molecules not only cationic ones. The in vitro release experiment of the accommodated drug molecules has been reported under the acidic conditions. In order to discuss the future direction of layered silicates as drug carrier, materials' variation of layered silicates and their modification, and the reported stimuli-responsive hybrids based on layered silicates were introduced.

Selective adsorption of oppositely charged PNIPAAM on halloysite surfaces: a route to thermo-responsive nanocarriers

Halloysite nanotubes were functionalized with stimuli-responsive macromolecules to generate smart nanohybrids. Poly(N-isopropylacrylamide)-co-methacrylic acid (PNIPAAM-co-MA) was selectively adsorbed into halloysite lumen by exploiting electrostatic interactions. Amine-terminated PNIPAAM polymer was also investigated that selectively interacts with the outer surface of the nanotubes. The adsorption site has a profound effect on the thermodynamic behavior and therefore temperature responsive features of the hybrid material. The drug release kinetics was investigated by using diclofenac as a non-steroidal anti-inflammatory drug model. The release kinetics depends on the nanoarchitecture of the PNIPAAM/halloysite based material. In particular, diclofenac release was slowed down above the LCST for PNIPAAM-co-MA/halloysite. Opposite trends occurred for halloysite functionalized with PNIPAAM at the outer surface. This work represents a further step toward the opportunity to extend and control the delivery conditions of active species, which represent a key point in technological applications.

Phase Engineering of Hydrophobic Meso-Environments in Silica Particles for Technical Performance Enrichment

Hexadecyltrimethylammonium bromide (CTAB) was utilized to template the growth of mesoporous silica particles via ammonia-catalyzed hydrolysis and condensation of tetraethoxysilane (TEOS) in the reaction solutions with varied volume fractions of ethanol ( f_R). The use of 9,10-bis(phenylethynyl) anthracene (BPEA) as a fluorescence probe unraveled a clear difference in interior structure between the CTAB micelles confined at different f_R. At f_R of 0.3, the confined CTAB micelles consisting of regularly and densely packed alkane chains, which created crystalline interiors, in which the doped BPEA molecules were effectively isolated in the monomeric form and well protected against aggressive attack from the surrounding environment. At f_R of 0.4 or 0.5, the confined CTAB micelles consisting of less regularly but densely packed alkane chains created glassy interiors, which enabled reversible aggregation of the doped BPEA in response to the surrounding environmental change, for instance, the ethanol content in the particle dispersion. At f_R of 0.6 or 0.7, the confined CTAB micelles consisting of loosely packed alkane chains created amorphous interiors, which offered sufficiently large free spaces to facilitate the material exchange with the surrounding environment, as evidenced by noticeable intake of the Pyronin Y molecules present in the particle dispersion. The revealed phase modulation of the interiors of surfactant micelles, confined in the pores of mesoporous particles, from crystalline to glassy and amorphous structures, which were scarcely reported in literature, will inspire rational design of mesoporous silica particles with desired technical performance according to the purposes of the practical application.

A Perspective on Bio-Mediated Material Structuring

Bioinspiration, biomorphy, biomimicry, biomimetics, bionics, and biotemplating are terms used to describe the fabrication of materials or, more generally, systems to solve technological problems by abstracting, emulating, using, or transferring structures from biological paradigms. Herein, a brief overview of how the different terminologies are being typically applied is provided. It is proposed that there is a rich field of research that can be expanded by utilizing various novel approaches for the guidance of living organisms for "bio-mediated" material structuring purposes. As examples of contact-based or contact-free guidance, such as substrate patterning, the application of light, magnetic fields, or chemical gradients, potentially interesting methods of creating hierarchically structured monolithic engineering materials, using live patterned biomass, biofilms, or extracellular substances as scaffolds, are presented. The potential advantages of such materials are discussed, and examples of live self-patterning of materials are given.

Mechanochemical methods for the preparation of intercalation compounds, from intercalation to the formation of layered double hydroxides

Mechanochemical methods (solid–solid reactions under ambient conditions or solvent free synthesis) are useful for the preparation of intercalation compounds.

Intercalation of calcein into layered silicate magadiite and their optical properties

Calcein-Ca (II), Zn (II) and Al (III) complexes were successfully intercalated into interlayer surfaces of layered silicate magadiite and fluorescence properties of organic metal-chelates in the confined spaces were investigated. Structures, compositions and morphologies of the intercalated magadiites were adequately studied by tests, including X-ray diffraction, energy-dispersive X-ray spectrometer, elemental mapping, X-ray photoelectron spectroscopy, inductively coupled plasma atomic emission spectroscopy, Fourier-transform infrared spectra, ultraviolet-visible spectroscopy, thermo-gravimetric analysis, differential thermal analysis and scanning electron microscopy. Results confirmed that metal-organic chelate species were immobilized onto the silicate sheets via solid-state interaction. Basal spacings between silicate layers decreased by exchanged metal ions and increased after intercalation of calcein into the interlayer spaces of cation-exchanged magadiites. The encapsulation was obtained by a flexible solid-solid reaction, and the present reaction and products had a potential of application to industrial uses. A speculative mechanism was proposed for reaction by solid-state intercalation. Furthermore, it was found that the complexes in the interlayer space also exhibited special fluorescence properties. The significance of this current work was that it provided a possible route for synthesizing metal-organic complexes that encapsulated in phyllosilicate.

Halloysite Nanotubes: Controlled Access and Release by Smart Gates

Hollow halloysite nanotubes have been used as nanocontainers for loading and for the triggered release of calcium hydroxide for paper preservation. A strategy for placing end-stoppers into the tubular nanocontainer is proposed and the sustained release from the cavity is reported. The incorporation of Ca(OH)₂ into the nanotube lumen, as demonstrated using transmission electron microscopy (TEM) imaging and Energy Dispersive X-ray (EDX) mapping, retards the carbonatation, delaying the reaction with CO₂ gas. This effect can be further controlled by placing the end-stoppers. The obtained material is tested for paper deacidification. We prove that adding halloysite filled with Ca(OH)₂ to paper can reduce the impact of acid exposure on both the mechanical performance and pH alteration. The end-stoppers have a double effect: they preserve the calcium hydroxide from carbonation, and they prevent from the formation of highly basic pH and trigger the response to acid exposure minimizing the pH drop-down. These features are promising for a composite nanoadditive in the smart protection of cellulose-based materials.

Kinetics of Interlayer Expansion of a Layered Silicate Driven by Caffeine Intercalation in the Water Phase Using Transmission X-ray Diffraction

The kinetics of caffeine uptake into the interlayer nanospace of silicate nanosheets modified with benzylammonium (BA) was evaluated by in situ monitoring the basal spacing in aqueous media using transmission X-ray diffraction. An interlayer spacing of 0.58 nm in water before caffeine uptake indicates a monomolecular layer of BA and a few water layers in each interlayer. The interlayer space expanded by 0.10 nm upon caffeine uptake (intercalation) and saturated even in the presence of excess caffeine. Time-course profiles of the interlayer spacing and the uptake amount after injection of caffeine into the water slurry were obtained. At the initial period, the plot for the basal spacing was located above that for the adsorbed amount, suggesting that the rate of the interlayer spacing change was faster than that to attain the adsorption equilibrium. A first-order kinetic simulation fitted to the profile also indicates that the basal spacing included a rapid expansion of 0.08 nm within a few minutes and a slow expansion of 0.02 nm over several hours. Regarding the slow component, the rate constant for the basal spacing was lower than that for the amount of caffeine adsorbed, meaning that a steady-state basal spacing is reached after the adsorption equilibrium.

Cellular uptake pathways of sepiolite nanofibers and DNA transfection improvement

Sepiolite is a nanofibrous natural silicate that can be used as a nanocarrier because it can be naturally internalized into mammalian cells, due to its nano-size dimension. Therefore, deciphering the mechanisms of sepiolite cell internalization constitutes a question interesting biotechnology, for the use of sepiolite as nanocarrier, as well as environmental and public health concerns. Though it is low, the perfectly stable and natural intrinsic fluorescence of sepiolite nanofibers allows to follow their fate into cells by specifically sensitive technics. By combining fluorescence microscopy (including confocal analysis), time-lapse video microscopy, fluorescence activated cell sorting and transmission electron microscopy, we show that sepiolite can be spontaneously internalized into mammalian cells through both non-endocytic and endocytic pathways, macropinocytosis being one of the main pathways. Interestingly, exposure of the cells to endocytosis inhibitors, such as chloroquine, two-fold increase the efficiency of sepiolite-mediated gene transfer, in addition to the 100-fold increased resulting from sepiolite sonomechanical treatment. As sepiolite is able to bind various biological molecules, this nanoparticulate silicate could be a good candidate as a nanocarrier for simultaneous vectorization of diverse biological molecules.

Surface-engineered mesoporous silica particles with luminescent, cytocompatible and targeting properties for cancer cell imaging

Mechanochemically-treated europium(iii)-doped mesoporous silica particles were prepared, and a targeting ligand for cancer cells was immobilized. The surface-engineered particles exhibited the clear imaging along with all the cellular shapes.

Phenolic compound-mediated single-step fabrication of copper oxide nanoparticles for elucidating their influence on anti-bacterial and catalytic activity

A single-step synthesis of copper oxide nanoparticles (CuO NPs) from a phenolic compound (rosmarinic acid) at ambient temperature was developed in this study.

All-into-one strategy to synthesize mesoporous hybrid silicate microspheres from naturally rich red palygorskite clay as high-efficient adsorbents

A mesoporous hybrid silicate microsphere with superior adsorption performance has been successfully synthesized by employing an "all-into-one" strategy and a simple one-pot hydrothermal process using naturally abundant low-grade red palygorskite (PAL) clay as raw material in the presence of non-toxic SiO32- and Mg2+ ions. As is expected, both the PAL and associated minerals transformed into a new amorphous mesoporous hybrid silicate microsphere without using any additional pore-forming template. The mesoporous silicate microsphere shows a large pore size of 37.74 nm, high specific surface area of 489.81 m2/g (only 54.67 m2/g for raw PAL) and negative surface potential of -43.3 mV, and its maximum adsorption capabilities for Methylene bule (MB) and Crystal violet (CV) reach 407.95 mg/g and 397.22 mg/g, respectively. Meanwhile, 99.8% of MB (only 53% for raw PAL) and 99.7% of CV (only 43% for raw PAL) were sucessfully removed from 200 mg/L of initial dye solution by only using 1 g/L of the adsorbent. In addition, the spent adsorbent can be easily regenerated and repeatly reused for muptiple cycles. The study on adsorption mechanism revealed that electrostatic attraction, hydrogen bonding and chemical complexing interactions are the main factors contributed to the high dye adsorption.

Physical interactions between DNA and sepiolite nanofibers, and potential application for DNA transfer into mammalian cells

Nanofibers of sepiolite, a natural silicate belonging to the clay minerals family, might constitute a potential promising nanocarrier for the non-viral transfer of bio-molecules. We show here that sepiolite nanofibers efficiently bind different types of DNA molecules through electrostatic interactions, hydrogen bonding, cation bridges, and van der Waals forces. Moreover, Fourier-transform infrared spectroscopy identified the external silanol groups as the main sites of interaction with the DNA. Furthermore, as a proof of concept, we show that sepiolite is able to stably transfer plasmid DNA into mammalian cells and that the efficiency can be optimized. Indeed, sonication of sepiolite 100-fold stimulated DNA transfection efficiency. These results open the way to the use of sepiolite-based biohybrids as a novel class of nanoplatform for gene transfer with potential clinical applications.

Chemistry of Mesoporous Organosilica in Nanotechnology: Molecularly Organic-Inorganic Hybridization into Frameworks

Organic-inorganic hybrid materials aiming to combine the individual advantages of organic and inorganic components while overcoming their intrinsic drawbacks have shown great potential for future applications in broad fields. In particular, the integration of functional organic fragments into the framework of mesoporous silica to fabricate mesoporous organosilica materials has attracted great attention in the scientific community for decades. The development of such mesoporous organosilica materials has shifted from bulk materials to nanosized mesoporous organosilica nanoparticles (designated as MONs, in comparison with traditional mesoporous silica nanoparticles (MSNs)) and corresponding applications in nanoscience and nanotechnology. In this comprehensive review, the state-of-art progress of this important hybrid nanomaterial family is summarized, focusing on the structure/composition-performance relationship of MONs of well-defined morphology, nanostructure, and nanoparticulate dimension. The synthetic strategies and the corresponding mechanisms for the design and construction of MONs with varied morphologies, compositions, nanostructures, and functionalities are overviewed initially. Then, the following part specifically concentrates on their broad spectrum of applications in nanotechnology, mainly in nanomedicine, nanocatalysis, and nanofabrication. Finally, some critical issues, presenting challenges and the future development of MONs regarding the rational synthesis and applications in nanotechnology are summarized and discussed. It is highly expected that such a unique molecularly organic-inorganic nanohybrid family will find practical applications in nanotechnology, and promote the advances of this discipline regarding hybrid chemistry and materials.