A water-responsive calix[4]resorcinarene system: self-assembly and fluorescence modulation

This study explores how water content modulates the self-assembly and fluorescence behavior of two novel calix[4]resorcinarene macrocycles. These macrocycles transition from large, flattened structures in pure THF to large giant vesicles (500-5000 nm) coexisting with small micelles (3.4-3.5 nm) as the water percentage in THF/water mixtures increases up to 53%. At higher water percentages, the assemblies become smaller, forming unimodal micelles with diameters of approximately 140-160 nm. Fluorescence quenching is observed upon water addition, attributed to nonradiative deactivation. These findings highlight water as a key regulator of the assembly and fluorescence of these calix[4]resorcinarene macrocycles, paving the way for further development of water-responsive calixarene systems.

Unravel-engineer-design: a three-pronged approach to advance ionomer performance at interfaces in proton exchange membrane fuel cells

Proton exchange membrane fuel cells (PEMFCs), which use hydrogen as fuel, present an eco-friendly alternative to internal combustion engines (ICEs) for powering low-to-heavy-duty vehicles and various devices. Despite their promise, PEMFCs must meet strict cost, performance, and durability standards to reach their full potential. A key challenge lies in optimizing the electrode, where a thin ionomer layer is responsible for proton conduction and binding catalyst particles to the electrode. Enhancing ion transport within these sub-μm thick films is critical to improving the oxygen reduction reaction (ORR) at the cathodes of PEMFCs. For the past 15 years, our research has targeted this limitation through a comprehensive "Unravel - Engineer - Design" approach. We first unraveled the behavior of ionomers, gaining deeper insights into both the average and distributed proton conduction properties within sub-μm thick films and at interfaces that mimic catalyst binder layers. Next, we engineered ionomer-substrate interfaces to gain control over interfacial makeup and boost proton conductivity, essential for PEMFC efficiency. Finally, we designed novel nature-derived or nature-inspired, fluorine-free ionomers to tackle the ion transport limitations seen in state-of-the-art ionomers under thin-film confinement. Some of these ionomers even pave the way to address cost and sustainability challenges in PEMFC materials. This feature article highlights our contributions and their importance in advancing PEMFCs and other sustainable energy conversion and storage technologies.

Comparative Study of the Antioxidant Activity of the Conformers of C-tetra(4-methoxyphenyl)calix[4]resorcinarene

C-tetra(4-methoxyphenyl)calix[4]resorcinarene was synthesized by hydrochloric acid-catalysed cyclocondensation of resorcinol and 4-methoxybenzaldehyde. Under these conditions, the reaction produces a conformational mixture of crown and chair structural conformers, which were separated and characterized by chromatographic and spectroscopic techniques. The antioxidant activity of both conformers was measured by using the DPPH assay, through which it was observed that the chair conformer showed greater antioxidant activity (IC50 = 47.46 ppm) than the crown conformer (IC50 = 78.46 ppm). Additionally, it was observed that the mixture of both conformers presented lower antioxidant activity than either conformer in isolation. The results found suggest that the chair conformer has efficient antioxidant activity that makes it a potential target for further research.

The effect of water in THF/water mixtures on CMC, aggregation sizes, and fluorescence quenching of a new calix[4]resorcinarene macrocycle

This study explores how water content modulates the self-assembly and fluorescence behavior of a novel calixarene, C1. C1 forms large, flattened structures in pure THF, but water addition triggers a transition to smaller, unimodal clusters. A critical micellar concentration (CMC) is identified, decreasing with increasing water content. Fluorescence quenching is observed upon water addition, attributed to nonradiative deactivation. These findings highlight water as a key regulator of C1's assembly and fluorescence, paving the way for further development of water-responsive calixarene systems.

Molecular-Level Control over Ionic Conduction and Ionic Current Direction by Designing Macrocycle-Based Ionomers

Poor ionic conductivity of the catalyst-binding, sub-micrometer-thick ionomer layers in energy conversion and storage devices is a huge challenge. However, ionomers are rarely designed keeping in mind the specific issues associated with nanoconfinement. Here, we designed nature-inspired ionomers (calix-2) having hollow, macrocyclic, calix[4]arene-based repeat units with precise, sub-nanometer diameter. In ≤100 nm-thick films, the in-plane proton conductivity of calix-2 was up to 8 times higher than the current benchmark ionomer Nafion at 85% relative humidity (RH), while it was 1-2 orders of magnitude higher than Nafion at 20-25% RH. Confocal laser scanning microscopy and other synthetic techniques allowed us to demonstrate the role of macrocyclic cavities in boosting the proton conductivity. The systematic self-assembly of calix-2 chains into ellipsoids in thin films was evidenced from atomic force microscopy and grazing incidence small-angle X-ray scattering measurements. Moreover, the likelihood of alignment and stacking of macrocyclic units, the presence of one-dimensional water wires across this macrocycle stacks, and thus the formation of long-range proton conduction pathways were suggested by atomistic simulations. We not only did see an unprecedented improvement in thin-film proton conductivity but also saw an improvement in proton conductivity of bulk membranes when calix-2 was added to the Nafion matrices. Nafion-calix-2 composite membranes also took advantage of the asymmetric charge distribution across calix[4]arene repeat units collectively and exhibited voltage-gating behavior. The inclusion of molecular macrocyclic cavities into the ionomer chemical structure can thus emerge as a promising design concept for highly efficient ion-conducting and ion-permselective materials for sustainable energy applications.

Exploring the Assembly of Resorc[4]arenes for the Construction of Supramolecular Nano-Aggregates

Many biologically active compounds feature low solubility in aqueous media and, thus, poor bioavailability. The formation of the host-guest complex by using calixarene-based macrocycles (i.e., resorcinol-derived cyclic oligomers) with a good solubility profile can improve solubilization of hydrophobic drugs. Herein, we explore the ability of resorc[4]arenes to self-assemble in polar solutions, to form supramolecular aggregates, and to promote water-solubility of an isoflavone endowed with anti-cancer activity, namely Glabrescione B (GlaB). Accordingly, we synthesized several architectures featuring a different pattern of substitution on the upper rim including functional groups able to undergo acid dissociation (i.e., carboxyl and hydroxyl groups). The aggregation phenomenon of the amphiphilic resorc[4]arenes has been investigated in a THF/water solution by UV–visible spectroscopy, at different pH values. Based on their ionization properties, we demonstrated that the supramolecular assembly of resorc[4]arene-based systems can be modulated at given pH values, and thus promoting the solubility of GlaB.

Macrocyclic-Amphiphile-Based Self-Assembled Nanoparticles for Ratiometric Delivery of Therapeutic Combinations to Tumors

Combination chemotherapy refers to the use of multiple drugs to treat cancer. In this therapy, the optimal ratio of the drugs is essential to achieve drug synergism and the desired therapeutic effects. However, most delivery strategies are unable to precisely control the ratio of the drugs during the drug loading and delivery processes, resulting in inefficient synergy and unpredictable efficacy. Herein, a macrocyclic-amphiphile-based self-assembled nanoparticle (MASN) that achieves precise loading and ratiometric delivery of therapeutic combinations is presented. By integrating multiple macrocyclic cavities within a single nanoparticle, the MASN can load multiple drug molecules via the host-guest interaction, and the ratio of the drugs loaded can be predicted with their initial concentrations and characteristic binding affinity. Moreover, MASNs are readily degraded under a hypoxic microenvironment, allowing spontaneous release of the drugs upon reaching tumor tissues. With precise drug loading and controlled release mechanisms, MASNs achieve ratiometric delivery of multiple commercial drugs to tumors, thereby achieving optimal anti-tumor effects. Since the optimal drug ratio of a therapeutic combination can be quickly determined in vitro, MASNs can translate this optimal ratio to the therapeutic benefits in vivo, providing a potential platform for the rapid development of effective combination cancer therapies involving multiple drugs.

New Amphiphilic Imidazolium/Benzimidazolium Calix[4]arene Derivatives: Synthesis, Aggregation Behavior and Decoration of DPPC Vesicles for Suzuki Coupling in Aqueous Media

In this study, new types of amphiphilic calix[4]arene derivatives bearing N-alkyl/aryl imidazolium/benzimidazolium fragments were designed and synthesized by two step transformation: Regioselective Blanc chloromethylation of distal-di-O-butyl calix[4]arene and subsequent interaction with N-Substituted imidazole/benzimidazole. Critical aggregation concentration (CAC) values were estimated using pyrene fluorescent probe. Obtained macrocycles were found to form submicron particles with electrokinetic potential +44–+57 mV in aqueous solution. For the first time it was found that amphiphilic calixarene causes the fast transformation of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) multilamellar vesicles into unilamellar ones and leads to the ordering of the lipid in membranes at the molar calixarene/DPPC ratio more than 0.07. In situ complexes of calixarene aggregates with Pd(OAc)₂ were found to be active in Suzuki–Miyaura coupling of 1-bromo-4-nitrobenzene with phenylboronic acid in water. It was shown that bulky N-substituents of heterocycle decrease the catalytic activity of the aggregates. These result can be assigned to the inhibition effect of Pd(II) complex in situ formation by bulky substituents located on the aggregate surface. Embedding of the most active palladium N-heterocyclic carbene (NHC) complex with methylimidazolium headgroups into DPPC vesicles enhances its catalytic activity in Suzuki–Miyaura coupling.

Assembly behaviors of calixarene-based amphiphile and supra-amphiphile and the applications in drug delivery and protein recognition

Calixarene is the third generation of supra-molecular compounds after crown ether and cyclodextrin. Amphiphilic calixarene can be obtained by modulation with both hydrophilic group and hydrophobic alkyl chain. Compared with conventional surfactant, amphiphilic calixarene has much lower critical micelle concentration and is much easier to self-assemble into different morphological aggregates. Calixarene-basedsupra-amphiphile can be designed via noncovalent bonds due to the capability of calixarene to recognize surfactant; the binding of a surfactant with calixarene can decrease the critical micelle concentration of surfactant by several times. The calixarene-surfactant complex can self-aggregate to form spherical micelles, vesicles, and spherical nanoparticles, and the aggregation behavior can be controlled by the structures and the molar ratio of surfactant to calixarene and environmental factors. Calixarene-based amphiphile and supra-amphiphile show low cytotoxicity. They can load drugs and assemble into nanocapsules with drugs. The structure of the calixarene-drug complex can respond to external stimuli, rendering the sustained release of the drug and suggesting its potential application as a drug delivery system. Recently, calixarene has also been found to selectively bind proteins, suggesting its prospect in disease diagnosis and intervention treatment in clinics. This review elaborates on the research progress in the self-assembly behaviors of calixarene-based amphiphile and supra-amphiphile and the applications of the calixarenes in drug delivery and protein recognition. The prospectives for the studies are also provided in this review.

Recent applications of chiral calixarenes in asymmetric catalysis

The use of calixarenes in asymmetric catalysis is receiving increasing attention due to their tunable three-dimensional molecular platforms along with their easy syntheses and versatile modification at the upper and lower rims. This review summarizes the recent progress of synthesis and use of chiral calixarenes in asymmetric syntheses which emerged later than 2010.

Closed polymer containers based on phenylboronic esters of resorcinarenes

Novel polymer nanospheres (p(SRA-B)) were prepared by cross-linking a sulfonated resorcinarene (SRA) with phenylboronic acid. p(SRA-B) shows good stability in water and can be used as a nanocontainer for the pH- and glucose-controlled substrate release. Fluorescent dyes (fluorescein, pyrene and 1,3,6,8-pyrenetetrasulfonic acid tetrasodium salt) were successfully loaded into p(SRA-B). The release of dye is achieved by lowering the pH value to 3 or by adding glucose.

A tetramer micelle: the smallest aggregation number corresponding to the vertex number of regular polyhedra in platonic micelles

In this paper, we describe the construction of tetramer micelles based on the idea of "Platonic micelles" whose aggregation number (N_agg) matches the vertex number of regular polyhedra and exhibits the monodispersity and discreteness in the N_agg.

Synthetic approaches to construct viral capsid-like spherical nanomaterials

This feature article describes recent progress in synthetic strategies to construct viral capsid-like spherical nanomaterials using the self-assembly of peptides and/or proteins.

Self-Assembly Can Direct Dynamic Covalent Bond Formation toward Diversity or Specificity

With the advent of reversible covalent chemistry the study of the interplay between covalent bond formation and noncovalent interactions has become increasingly relevant. Here we report that the interplay between reversible disulfide chemistry and self-assembly can give rise either to molecular diversity, i.e., the emergence of a unprecedentedly large range of macrocycles or to molecular specificity, i.e., the autocatalytic emergence of a single species. The two phenomena are the result of two different modes of self-assembly, demonstrating that control over self-assembly pathways can enable control over covalent bond formation.

A cavity extended water-soluble resorcin[4]arene: synthesis, pH-controlled complexation with paraquat, and application in controllable self-assembly

A novel pH-responsive molecular recognition motif was built between an anionic carboxylate group modified resorcin[4]arene and paraquat in water. We then employed it to fabricate a supra-amphiphile for controllable self-assembly.

Broad-Spectrum Tunable Photoluminescent Nanomaterials Constructed from a Modular Light-Harvesting Platform Based on Macrocyclic Amphiphiles

Broad-spectrum tunable photoluminescent nanomaterials are developed based on macrocyclic amphiphiles serving as a novel modular light-harvesting platform with discrete addressability of luminophores in a noncovalent way. By simply varying the donor/acceptor ratio, a broad spectrum of energy transfer outputs is achieved, pointing toward a proof-of-principle application as fluorescent inks for security printing.

Amphiphilic calixresorcinarene associates as effective solubilizing agents for hydrophobic organic acids: construction of nano-aggregates

Here we represent the first example of the formation of mixed nanoscale associates, constructed from amphiphilic calixresorcinarenes and hydrophobic carboxylic acids including drugs. The amidoamino-calixresorcinarene self-associates effectively solubilize hydrophobic carboxylic acids - drugs such as naproxen, ibuprofen, ursodeoxycholic acid and aliphatic dodecanoic acid - with the formation of the mixed aggregates with the macrocycle/substrate stoichiometry from 1/1 to 1/7. The ionization of organic acids and the peripheral nitrogen atoms of the macrocycles with the subsequent inclusion of hydrophobic acids into the macrocycle self-associates is the driving force of solubilization. In some cases, this leads to the co-assembly of the macrocycle polydisperse associates into supramolecular monodisperse nanoparticles with the diameter of about 100 nm. The efficiency of drug loading into the nanoparticles is up to 45% and depends on the structure of organic acid. The dissociation of the mixed aggregates and release of organic acid are attained by decreasing pH.

Soft Supramolecular Nanoparticles by Noncovalent and Host-Guest Interactions

Supramolecular chemistry provides a tool for the formation of highly ordered structures by means of noncovalent interactions. Soft supramolecular nanoparticles are self-assembled nanoassemblies based on small building blocks and stabilized by basic noncovalent interactions, selective host-guest interactions, or a combination of different interaction types. This review provides an overview of the existing approaches for the formation of supramolecular nanoparticles by various types of noncovalent interactions, with a strong focus on host-guest-mediated assemblies. The approaches are ordered based on the nature of the stabilizing supramolecular interaction, while focusing on the aspects that determine the particle structure. Where applicable, the use of these self-assembled nanostructures as vectors in molecular diagnostics and therapeutics is described as well. The stable yet reversible nature of supramolecular interactions and their chemical flexibility offer great prospects for the development of highly engineered nanoparticles which are compatible with the complexity of living systems.

Binding of calixarene-based Langmuir monolayers to mercury chloride is dependent on the amphiphile structure

Langmuir monolayers of the tetra and two regioselective diamino-substituted amphiphilic calix[4]arenes show different recognition properties towards HgCl₂ at the air–water interface, despite the macrocycles have highly similar structures.

Interfacial binding of divalent cations to calixarene-based Langmuir monolayers

The interactions of Langmuir monolayers produced through the self-assembly of an amphiphilic p-carboxycalix[4]arene (1) with a series of divalent, fourth-period transition metals, at the air-water interface, were investigated. Changes in the interfacial behavior of 1 in response to the presence of CuCl2, CoCl2, MnCl2, and NiCl2 were studied by means of Langmuir compression isotherms and Brewster angle microscopy (BAM). The measurements revealed that the self-assembly properties of 1 are significantly affected by Cu(2+) ions. The interactions of 1-based monolayers with Co(2+) and Cu(2+) ions were further investigated by means of synchrotron radiation-based X-ray reflectivity (XRR), X-ray near-total-reflection fluorescence (XNTRF), and grazing incidence X-ray diffraction (GIXD). XNTRF and XRR analyses revealed that the monolayer of 1 binds more strongly to Cu(2+) than Co(2+) ions. In the presence of relatively high concentrations of Cu(2+) ions in the subphase (1.4 × 10(-3) M), XNTRF exhibited anomalous depth profile behavior and GIXD measurements showed considerably strong diffuse scattering. Both measurements suggest the formation of Cu(2+) clusters contiguous to the monolayer of 1.

Synthesis and photophysical, electrochemical, antibacterial, and DNA binding studies of triazinocalix[2]arenes

The synthesized calix[2]arene[2]triazine derivatives bind effectively to DNA and exhibit efficient antibacterial activity against B. cereus, S. aureus and E. coli bacteria as supported by docking studies.

Macrocyclic amphiphiles

This review describes recent results in the investigation of macrocyclic amphiphiles, which are classified based on different macrocyclic frameworks including cyclodextrins, calixarenes, cucurbiturils, pillararenes, and other macrocycles involved.