Effects of Sr/F-Bioactive Glass Nanoparticles and Calcium Phosphate on Monomer Conversion, Biaxial Flexural Strength, Surface Microhardness, Mass/Volume Changes, and Color Stability of Dual-Cured Dental Composites for Core Build-Up Materials

This study prepared composites for core build-up containing Sr/F bioactive glass nanoparticles (Sr/F-BGNPs) and monocalcium phosphate monohydrate (MCPM) to prevent dental caries. The effect of the additives on the physical/mechanical properties of the materials was examined. Dual-cured resin composites were prepared using dimethacrylate monomers with added Sr/F-BGNPs (5 or 10 wt%) and MCPM (3 or 6 wt%). The additives reduced the light-activated monomer conversion by ~10%, but their effect on the conversion upon self-curing was negligible. The conversions of light-curing or self-curing polymerization of the experimental materials were greater than that of the commercial material. The additives reduced biaxial flexural strength (191 to 155 MPa), modulus (4.4 to 3.3), and surface microhardness (53 to 45 VHN). These values were comparable to that of the commercial material or within the acceptable range of the standard. The changes in the experimental composites' mass and volume (~1%) were similar to that of the commercial comparison. The color change of the commercial material (1.0) was lower than that of the experimental composites (1.5-5.8). The addition of Sr/F-BGNPs and MCPM negatively affected the physical/mechanical properties of the composites, but the results were satisfactory except for color stability.

Development of self-repair nano-rod scaffold materials for implantation of osteosarcoma affected bone tissue

Nano-hydroxyapatite with a xylitol based co-polymer and a capsaicin loaded scaffold was investigated as a natural antioxidant loaded bone implant material on osteosarcoma cells.

Functional calcium phosphate composites in nanomedicine

Calcium phosphate (CaP) materials have many peculiar and intriguing properties. In nature, CaP is found in nanostructured form embedded in a soft proteic matrix as the main mineral component of bones and teeth. The extraordinary stoichiometric flexibility, the different stabilities exhibited by its different forms as a function of pH and the highly dynamic nature of its surface ions, render CaP one of the most versatile materials for nanomedicine. This review summarizes some of the guidelines so far emerged for the synthesis of CaP composites in aqueous media that endow the material with tailored crystallinity, morphology, size, and functional properties. First, we introduce very briefly the areas of application of CaP within the nanomedicine field. Then through some selected examples, we review some synthetic routes where the presence of functional units (small templating molecules like surfactants, or oligomers and polymers) assists the synthesis and at the same time impart the functionality or the responsiveness desired for the end-application of the material. Finally, we illustrate two examples from our laboratory, where CaP is decorated by biologically active polymers or prepared within a thermo- and magneto-responsive hydrogel, respectively.

Hydrogels based on poly(ethylene glycol) as scaffolds for tissue engineering application: biocompatibility assessment and effect of the sterilization process

Hydrogels are suitable materials to promote cell proliferation and tissue support because of their hydrophilic nature, porous structure and sticky properties. However, hydrogel synthesis involves the addition of additives that can increase the risk of inducing cytotoxicity. Sterilization is a critical process for hydrogel clinical use as a proper scaffold for tissue engineering. In this study, poly(ethylene glycol) (PEG), poly(ethylene glycol)-chitosan (PEG-CH) and multi-arm PEG hydrogels were synthesized by free radical polymerization and sterilized by gamma irradiation or disinfected using 70 % ethanol. The biocompatibility assessment in human fibroblasts and hemocompatibility studies (hemolysis, platelet aggregation, morphology of mononuclear cells and viability) in peripheral blood from healthy volunteers (ex vivo), were performed. The sterilization or disinfection effect on hydrogel structures was evaluated by FT-IR spectroscopy. Results indicated that hydrogels do not induce any damage to fibroblasts, erythrocytes, platelets or mononuclear cells. Moreover, there was no significant difference in the biocompatibility after the sterilization or disinfection treatment. However, after gamma irradiation, several IR spectroscopic bands were shifted to higher or lower energies with different intensity in all hydrogels. In particular, several bands associated to carboxyl or hydroxyl groups were slightly shifted, possibly associated to scission reactions. The disinfection treatment (70 % ethanol) and γ-irradiation at 13.83 ± 0.7 kGy did not induce morphological damages and yielded sterile and biocompatible PEG hydrogels potentially useful for clinical applications.

Advances in synthesis of calcium phosphate crystals with controlled size and shape

Calcium phosphate (CaP) materials have a wide range of applications, including biomaterials, adsorbents, chemical engineering materials, catalysts and catalyst supports and mechanical reinforcements. The size and shape of CaP crystals and aggregates play critical roles in their applications. The main inorganic building blocks of human bones and teeth are nanocrystalline CaPs; recently, much progress has been made in the application of CaP nanocrystals and their composites for clinical repair of damaged bone and tooth. For example, CaPs with special micro- and nanostructures can better imitate the biomimetic features of human bone and tooth, and this offers significantly enhanced biological performances. Therefore, the design of CaP nano-/microcrystals, and the shape and hierarchical structures of CaPs, have great potential to revolutionize the field of hard tissue engineering, starting from bone/tooth repair and augmentation to controlled drug delivery devices. Previously, a number of reviews have reported the synthesis and properties of CaP materials, especially for hydroxyapatite (HAp). However, most of them mainly focused on the characterizations and physicochemical and biological properties of HAp particles. There are few reviews about the control of particle size and size distribution of CaPs, and in particular the control of nano-/microstructures on bulk CaP ceramic surfaces, which is a big challenge technically and may have great potential in tissue engineering applications. This review summarizes the current state of the art for the synthesis of CaP crystals with controlled sizes from the nano- to the macroscale, and the diverse shapes including the zero-dimensional shapes of particles and spheres, the one-dimensional shapes of rods, fibers, wires and whiskers, the two-dimensional shapes of sheets, disks, plates, belts, ribbons and flakes and the three-dimensional (3-D) shapes of porous, hollow, and biomimetic structures similar to biological bone and tooth. In addition, this review will also summarize studies on the controlled formation of nano-/microstructures on the surface of bulk ceramics, and the preparation of macroscopical bone grafts with 3-D architecture nano-/microstructured surfaces. Moreover, the possible directions of future research and development in this field, such as the detailed mechanisms behind the size and shape control in various strategies, the importance of theoretical simulation, self-assembly, biomineralization and sacrificial precursor strategies in the fabrication of biomimetic bone-like and enamel-like CaP materials are proposed.

Shape evolution and size controlled synthesis of mesoporous hydroxyapatite nanostructures and their morphology dependent Pb(ii) removal from waste water

Nanostructured hydroxyapatite with tunable morphologies was prepared by suitably adjusting the surfactants and used as an adsorbent for Pb(ii) from wastewater.

Facile in situ growth of Fe3O4 nanoparticles on hydroxyapatite nanorods for pH dependent adsorption and controlled release of proteins

The magnetic hydroxyapatite nanostructures were prepared by hydrothermal technique and studied their protein adsorption and in vitro cytotoxicity in humen MGC-803 cell.

Utilization of waste phosphogypsum to prepare hydroxyapatite nanoparticles and its application towards removal of fluoride from aqueous solution

In the present study, waste phosphogypsum (PG) was utilized firstly to prepare hydroxyapatite nanoparticles (nHAp) via microwave irradiation technology. The nHAp derived from PG exhibited a hexagonal structure with the particle size about 20 nm × 60 nm and high purity. Meanwhile, the adsorption behaviour of fluoride onto the nHAp derived from PG was investigated to evaluate the potential application of this material for the treatment of the wastewater polluted with fluoride. The results indicate that the nHAp derived from PG can be used as an efficient adsorbent for the removal of fluoride from aqueous solution. The maximum adsorption capacities calculated from Langmuir-Freundlich model were 19.742, 26.108, 36.914 and 40.818 mg F(-)/g nHAp for 298, 308, 318 and 328 K, respectively. The pseudo-second order kinetic model was found to provide the best correlation of the used experimental data compared to the pseudo-first order and the adsorption isotherm could be well defined by Langmuir-Freundlich equation. The adsorption mechanism investigation shows that electrostatic interaction and hydrogen bond are the main driving force for fluoride uptake onto nHAp derived from waste PG.