Selective detection of trace amount of Cu2+ using semiconductor nanoparticles in photoelectrochemical analysis

Photoelectrochemical detection of copper ions based on a covalent organic framework with tunable properties

Copper ions (Cu2+) play an essential role in various cellular functions, including respiration, nerve conduction, tissue maturation, oxidative stress defense, and iron metabolism. Covalent organic frameworks (COFs) are a class of porous crystalline materials with directed structural designability and high stability due to the combination of different monomers through covalent bonds. In this study, we synthesized a porphyrin-tetrathiazole COF (TT-COF(Zn)) with Zn-porphyrin and tetrathiafulvalene (TTF) as monomers and used it as a photoactive material. The strong light absorption of metalloporphyrin and the electron-rich properties of supplied TTF contribute to its photoelectrochemical performance. Additionally, the sulfur (S) in the TTF can coordinate with Cu2+. Based on these properties, we constructed a highly sensitive photoelectrochemical sensor for detecting Cu2+. The sensor exhibited a linear range from 0.5 nM to 500 nM (R2 = 0.9983) and a detection limit of 0.15 nM for Cu2+. Notably, the sensor performed well when detecting Cu2+ in water samples.

Colorimetric Sensors for Chemical and Biological Sensing Applications

Colorimetric sensors have been widely used to detect numerous analytes due to their cost-effectiveness, high sensitivity and specificity, and clear visibility, even with the naked eye. In recent years, the emergence of advanced nanomaterials has greatly improved the development of colorimetric sensors. This review focuses on the recent (from the years 2015 to 2022) advances in the design, fabrication, and applications of colorimetric sensors. First, the classification and sensing mechanisms of colorimetric sensors are briefly described, and the design of colorimetric sensors based on several typical nanomaterials, including graphene and its derivatives, metal and metal oxide nanoparticles, DNA nanomaterials, quantum dots, and some other materials are discussed. Then the applications, especially for the detection of metallic and non-metallic ions, proteins, small molecules, gas, virus and bacteria, and DNA/RNA are summarized. Finally, the remaining challenges and future trends in the development of colorimetric sensors are also discussed.

An off-on fluorescence aptasensor for trace thrombin detection based on FRET between CdS QDs and AuNPs

An off-on fluorescence aptasensor was developed for trace thrombin detection based on fluorescence resonance energy transfer (FRET) between CdS QDs and gold nanoparticles (AuNPs). Using DNA pairwise hybridization of the aptamer to the complementary DNA (cDNA), the CdS QDs (energy donor) were tightly coupled to the AuNPs (energy acceptor), resulting in the occurrence of FRET and there was a dramatic fluorescence quenching of CdS QDs (turn off). When the thrombin was added to the fluorescence aptasensor, the specific binding of the aptamer to the target formed a G-quadruplex that caused the AuNPs receptor to detach and the DNA duplex to be disassembled. The process would inhibit the FRET which contribute to the recovery of fluorescence (turn on) and an "off-on" fluorescence aptasensor for thrombin detection was constructed accordingly. Under optimal conditions, the fluorescence recovery showed good linearity with the concentration of thrombin in the range of 1.35-54.0 nmol L-1, and the detection limit was 0.38 nmol L-1 (S/N = 3, n = 9). Importantly, the fluorescence aptasensor presented excellent specificity for thrombin, and was successfully applied to the quantitative determination of thrombin in real serum with satisfactory recoveries of 98.60-102.2%.

Ascorbic Acid Sensor Based on CdS QDs@PDA Fluorescence Resonance Energy Transfer

An ascorbic acid (AA) sensor was constructed based on the fluorescence resonance energy transfer (FRET) between CdS quantum dots (CdS QDs) and polydopamine (PDA) to detect trace AA sensitively. FRET occurred due to the broad absorption spectrum of PDA completely overlapped with the narrow emission spectrum of CdS QDs. The fluorescence of CdS QDs was quenched and in the "off" state. When AA was present, the conversion of DA to PDA was hindered and the FRET disappeared, resulting in the fluorescence of CdS QDs in an "on" state. Importantly, the degree of fluorescence recovery of CdS QDs displayed a desirable linear correlation with the concentration of AA in the range of 5.0-100.0 μmol/L, the linear equation is y=0.0119cAA+0.3113, and the detection limit is 1.16 μmol/L (S/N = 3, n = 9). There was almost no interference with common amino acid, glucose and biological sulfhydryl small molecules to AA. Trace amount of AA in vitamin C tablets were determined and satisfactory results were obtained; the recoveries were observed to be 98.01-100.7%.

Dual-Modal Photoelectrochemical and Visualized Detection of Copper Ions

Copper is one of the extensively utilized heavy metals in modern industry and can be easily released into the environment due to high solubility of copper ions (Cu²⁺). Its percolation in water and accumulation along the food chain pose a serious threat to human health. Hence, it is of great significance to explore a novel, facile, and sensitive detection method for Cu²⁺. Based on the intriguing photo-to-electricity conversion process of CdS QDs, as well as desirable electrochromic property of WO₃ NFs, a dual-modal photoelectrochemical (PEC) and visualized detection platform for Cu²⁺ is fabricated. The electrochromic WO₃ NFs act as a display for the Cu²⁺ concentration, of which the color change could be observed directly by the naked eye, while the PEC signal provides accurate data for further analysis. In this work, a sensitive detection of Cu²⁺ in the range of 1 × 10^-5 to 5 × 10^-4 M is achieved, with a detection limit of 3.2 × 10^-6 M. The dual-modal analysis gives more choices for signal readouts with enhanced quantification reliability, which is adaptive for diverse application scenarios, especially for on-site investigation. This protocol offers a prototype for quick and reliable detection of the Cu²⁺ concentrations, and is promising for other environmental pollutants.

Photoelectrochemical assay based on CdS nanocrystal\hexagonal carbon-nitrogen tube nanocomposite for detection of silver ions

A photochemical assay was reported based on CdS nanocrystal (NC)\hexagonal carbon-nitrogen tube (HCNT) nanocomposite for the detection of Ag⁺. When CdS NCs were combined with HCNT, the photocurrent intensity was increased extensively. After incubation of Ag⁺ with CdS NC\HCNT nanocomposite-modified electrode, Ag₂S was formed on the electrode by the ion-change reaction. As the band gap of Ag₂S cannot match well with HCNT, the photogenerated electron-hole pairs cannot separate efficiently, so the photocurrent intensity decreases. A good linear relationship between the concentration of Ag⁺ in the range from 0.01 to 3 μM and the corresponding photocurrent intensity was obtained with a detection limit of 3.3 nM (S/N = 3). The assay was employed to detect Ag⁺ in lake water and human serum with satisfactory results, which indicated that it might have a broad application in different areas. Photoelectrochemical assay was reported based on CdS nanocrystal\hexagonal carbon-nitrogen tube nanocomposite for detection of Ag^.

Visible light mediated self-powered sensing based on target induced recombination of photogenerated carriers

Self-powered sensing platforms have received widespread attention in areas such as portable, wearable and point-of-care devices. Here we reported visible light mediated self-powered electrochemical sensing based on target induced recombination of photogenerated carriers, which has highly sensitive to detect copper ions concentration. We utilized the recombination of photogenerated carriers mechanism to design visible light-responsive Fe₂O₃-CdS n-n heterojunction as photoanode material, which greatly improved the problem of output energy in photocatalytic self-powered sensors. Expectedly, our proposed visible light mediated self-powered electrochemical system has high separation efficiency of photogenerated carriers, which is 8.4 times that in presence of Cu²⁺. Furthermore, this self-powered electrochemical sensing platform used Cu²⁺ induced recombination of photogenerated carriers, showed a clear linear relationship from 1 nM to 5000 nM with an acceptable detection limit of 0.4 nM. This self-powered electrochemical sensing platform with excellent selectivity, accredited reproducibility and believable stability exhibited promising prospects in developing portable sensing devices and detection chip for real-time and rapid monitoring of Cu²⁺.

Ion-selective polymer dots for photoelectrochemical detection of potassium ions

Potassium-selective polymer dots (K-Pdots) containing potassium ionophores were for the first time used for photoelectrochemical (PEC) analysis and yielded sensitive and specific detection of potassium ions. The successful PEC analysis using ion-selective Pdots underscored the effectiveness of the strategy deployed and suggested the potential universality of this strategy for the detection of metal ions, which should advance the development of PEC sensors in ion analysis.

Recent Progress and Development in Inorganic Halide Perovskite Quantum Dots for Photoelectrochemical Applications

Inorganic halide perovskite quantum dots (IHPQDs) have recently emerged as a new class of optoelectronic nanomaterials that can outperform the existing hybrid organometallic halide perovskite (OHP), II-VI and III-V groups semiconductor nanocrystals, mainly due to their relatively high stability, excellent photophysical properties, and promising applications in wide-ranging and diverse fields. In particular, IHPQDs have attracted much recent attention in the field of photoelectrochemistry, with the potential to harness their superb optical and charge transport properties as well as spectacular characteristics of quantum confinement effect for opening up new opportunities in next-generation photoelectrochemical (PEC) systems. Over the past few years, numerous efforts have been made to design and prepare IHPQD-based materials for a wide range of applications in photoelectrochemistry, ranging from photocatalytic degradation, photocatalytic CO₂ reduction and PEC sensing, to photovoltaic devices. In this review, the recent advances in the development of IHPQD-based materials are summarized from the standpoint of photoelectrochemistry. The prospects and further developments of IHPQDs in this exciting field are also discussed.

Three-dimensional CdS nanosheet-enwrapped carbon fiber framework: Towards split-type CuO-mediated photoelectrochemical immunoassay

This work reports a customized methodology for the fabrication of 3D CdS nanosheet (NS)-enwrapped carbon fiber framework (CFF) and its utilization for sensitive split-type CuO-mediated PEC immunoassay. Specifically, the 3D CdS NS-CFF was fabricated via a solvothermal process, while the sandwich immunocomplexing was allowed in a 96 well plate with CuO nanoparticles (NPs) as the signaling labels. The subsequent release of the Cu²⁺ ions was directed to interact with the CdS NS, generating trapping sites and thus inhibiting its photocurrent generation. In such a protocol, the 3D CdS NS-CFF photoelectrode could not only guarantee its sufficient contact with the Cu²⁺-containing solution but also supply plenty CdS surface for the Cu²⁺ ions. Because of the target-dependent release of the Cu²⁺ ions and its proper coupling with the 3D CdS NS-CFF photoelectrode, a sensitive split-type PEC immunoassay was achieved for the detection of brain natriuretic peptide (BNP). This proposed system exhibited good stability and selectivity, and its applicability for real sample analysis was also demonstrated via comparison with the commercial BNP enzyme-linked immunosorbent assay (ELISA) kit. We expect this work could stimulate more interest in the design and utilization of 3D photoelectrodes for novel PEC bioanalysis.

Photoelectrochemical Determination of Cu2+ Using a WO3/CdS Heterojunction Photoanode

Copper ions are not only physiologically essential for life but also hazardous materials causing a series of neurodegenerative diseases. Photoelectrochemical (PEC) detection has attracted a large amount of focus as a potential strategy to develop Cu²⁺ ion sensors. However, relatively low photocurrent signals with poor antidisturbance ability and the limited concentration range have prevented its practical applications. Here, we designed a WO₃/CdS heterojunction photoanode for the PEC determination of Cu²⁺ in aqueous solution through a simple two-step chemical bath deposition method. The obtained WO₃/CdS photoanode had a nanoplate morphology and showed an enhanced photoresponsivity with a photocurrent density of 1.5 mA/cm² at 1.23 V versus RHE under illumination. Naturally, it exhibited a low detection limit (0.06 μM) and wider range (0.5 μM to 1 mM) for Cu²⁺ PEC detection first, suggesting that the WO₃/CdS heterojunction photoanode is a promising tool to monitor copper pollution in natural environments.

Paper based modification-free photoelectrochemical sensing platform with single-crystalline aloe like TiO2 as electron transporting material for cTnI detection

By controlling target-induced signal quencher release, a label-free and modification-free microfluidic paper based photoelectrochemical analytical device (μ-PAD) for cardiac troponin-I (cTnI) detection was designed for the first time. To achieve it, cellulose paper based single-crystalline three-dimensional aloe like TiO₂ arrays (PSATs) were firstly fabricated as the electron transporting material, providing direct pathways for the charge carriers transfer, and subsequently coupled with CdS to form PSATs/CdS heterojunction for extending the solar spectrum response. Meanwhile, positive charged mesoporous silica nanoparticles (PMSNs) were prepared as the nanocarrier to efficient entrap the Cu²⁺ which could be regarded as signal quencher due to their reaction with CdS to form Cu_xS. Single stranded DNAs (ssDNAs), which could bind specifically with the target of cTnI, were then introduced to couple with the PMSNs and used as the bio-gate to encapsulate the signal quencher of Cu²⁺, endowing the functional PMSNs with responsiveness to cTnI. When the cTnI existed, the ssDNAs were dissociated from PMSNs due to the formation of cTnI-ssDNAs complexes, triggering controllable release of the trapped Cu²⁺, and further decreasing the photocurrent signal caused by the formation of Cu_xS. Accordingly, the concentration of cTnI could be accurately quantified via the photocurrent, realizing the target-induced modification-free μ-PAD assay. We believe this work could provide an ingenious idea to construct the easy-to-use novel modification-free μ-PAD.

Development of quantum dot-based biosensors: principles and applications

We review the recent advances in quantum dot-based biosensors and focus on quantum dot-based fluorescent, bioluminescent, chemiluminescent, and photoelectrochemical biosensors.

Photoelectrochemical immunosensor for methylated RNA detection based on g-C3N4/CdS quantum dots heterojunction and Phos-tag-biotin

N⁶-methyladenosine (m⁶A) is an enigmatic and abundant internal modification in eukaryotic messenger RNA (mRNA), which could affect various aspects of RNA metabolism and mRNA translation. Herein, a novel photoelectrochemical (PEC) immunosensor was constructed for m⁶A detection based on the inhibition of Cu²⁺ to the photoactivity of g-C₃N₄/CdS quantum dots (g-C₃N₄/CdS) heterojunction, where g-C₃N₄/CdS heterojunction was used as photoactive material, anti-m⁶A antibody as recognition unit for m⁶A-containing RNA, Phos-tag-biotin as link unit and avidin functionalized CuO as PEC signal indicator. When CuO was captured on electrode through biotin-avidin affinity reaction and then treated with HCl, Cu²⁺ could be released and Cu_xS would be formed based on the selective interaction between CdS and Cu²⁺, leading the photocurrent obviously decreased. Under the optimal detection conditions, the PEC biosensor displayed a linear range of 0.01-10nM and a low detection limit of 3.53 pM for methylated RNA determination. Furthermore, the developed method could also be used to detect the expression level of m⁶A methylated RNA in serum samples of breast cancer patient before and after operative treatment. The proposed assay strategy has a great potential for detecting the expression methylation level of RNA in real sample.

Quantum-dots-based photoelectrochemical bioanalysis highlighted with recent examples

Photoelectrochemical (PEC) bioanalysis is a newly developed methodology that provides an exquisite route for innovative biomolecular detection. Quantum dots (QDs) are semiconductor nanocrystals with unique photophysical properties that have attracted tremendous attentions among the analytical community. QDs-based PEC bioanalysis comprises an important research hotspot in the field of PEC bioanalysis due to its combined advantages and potentials. Currently, it has ignited increasing interests as demonstrated by increased research papers. This review aims to cover the most recent advances in this field. With the discussion of recent examples of QDs-PEC bioanalysis from the literatures, special emphasis will be placed on work reporting on fundamental advances in the signaling strategies of QDs-based PEC bioanalysis from 2013 to now. Future prospects in this field are also discussed.

A stable 3D Cd(ii) metal–organic framework for highly sensitive detection of Cu2+ions and nitroaromatic explosives

A Cd(ii) coordination polymer, [Cd₃(L)₂(H₂O)₅]·(H₂O)₄(1) (H₃L= 9-(4-carboxy-phenyl)-9H-carbazoly-3,6-dicarboxylic acid) has been synthesized solvothermally.

Functionalized poly (ionic liquid) as the support to construct a ratiometric electrochemical biosensor for the selective determination of copper ions in AD rats

An efficient ratiometric electrochemical biosensor for Cu²⁺ determination was constructed using dual hydroxyl-functionalized poly (ionic liquid) (DHF-PIL) as the catalyst support. The DHF-PIL exhibited typical macroporous structure, which provided a high surface area of 39.31m²/g for the sufficient loading of biomolecules. The specific recognition of Cu²⁺ was accomplished by employing neurokinin B (NKB) for the first time, which could bind to Cu²⁺ to form a [Cu^II(NKB)₂] complex with high specificity. Meanwhile, a common redox mediator, 2, 2'-Azinobis-(3-ethylbenzthiazoline-6-sulfonate) (ABTS) was modified into DHF-PIL by electrostatic interactions to act as an inner reference molecule, which provided a built-in correction for environmental effects and improving the detection accuracy. With this strategy, the developed electrochemical biosensor was capable of determining Cu²⁺ with a linear range between 0.9 and 36.1μM and low detection limit (LOD) and quantification limit (LOQ) of 0.24 and 0.6μM, respectively. The sensor also displayed a satisfactory selectivity against a series of interferences in the brain, including metal ions, amino acids and other endogenous compounds. Accordingly, the present biosensor was successfully applied to evaluate Cu²⁺ levels in normal and AD rats.

An ultrasensitive and selective method for the determination of Ceftriaxone using cysteine capped cadmium sulfide fluorescence quenched quantum dots as fluorescence probes

In this paper, l-cysteine (Cys) coated CdS quantum dots (QDs) have been prepared, which have excellent water-solubility and are highly stable in aqueous solution. These QDs is proposed as sensitizers for the determination of Ceftriaxone. The quantum dot nanoparticles were structurally and optically characterized by Ultra Violet-Visible absorption Spectroscopy (UV-vis absorption spectroscopy), Fourier transform infrared spectroscopy (FT-IR spectra) and photoluminescence (PL) emission spectroscopy. High resolution transmission electron microscopy (HRTEM) confirms that the Cys-CdS QDs have a spherical structure with good crystallinity. Therefore, a new simple and selective PL analysis system was developed for the determination of Ceftriaxone (CFX). Under the optimum conditions, The response of l-Cys capped CdS QDs as the probe was linearly proportional to the concentration of Ceftriaxone ions in the range of 1.6×10(-9)-1.1×10(-3)M with a correlation coefficient (R2) of 0.9902. The limit of detection of this system was found to be 1.3nM. This method is simple, sensitive and low cost.

Photoelectrochemical detection of metal ions

Depending on the situation, metal ions may either play beneficial roles or be harmful to human health and ecosystems. Sensitive and accurate detection of metal ions is thus a critical issue in the field of analytical sciences and great efforts have been devoted to the development of various metal ion sensors. Photoelectrochemical (PEC) detection is an emerging technique for the bio/chemical detection of metal ions, and features a fast response, low cost and high sensitivity. Using representative examples, this review will first introduce the fundamentals and summarize recent progress in the PEC detection of metal ions. In addition, interesting strategies for the design of particular PEC metal ion sensors are discussed. Challenges and opportunities in this field are also presented.

Cadmium Sulphide-Reduced Graphene Oxide-Modified Photoelectrode-Based Photoelectrochemical Sensing Platform for Copper(II) Ions

A photoelectrochemical (PEC) sensor with excellent sensitivity and detection toward copper (II) ions (Cu²⁺) was developed using a cadmium sulphide-reduced graphene oxide (CdS-rGO) nanocomposite on an indium tin oxide (ITO) surface, with triethanolamine (TEA) used as the sacrificial electron donor. The CdS nanoparticles were initially synthesized via the aerosol-assisted chemical vapor deposition (AACVD) method using cadmium acetate and thiourea as the precursors to Cd²⁺ and S^2-, respectively. Graphene oxide (GO) was then dip-coated onto the CdS electrode and sintered under an argon gas flow (50 mL/min) for the reduction process. The nanostructured CdS was adhered securely to the ITO by a continuous network of rGO that also acted as an avenue to intensify the transfer of electrons from the conduction band of CdS. The photoelectrochemical results indicated that the ITO/CdS-rGO photoelectrode could facilitate broad UV-visible light absorption, which would lead to a higher and steady-state photocurrent response in the presence of TEA in 0.1 M KCl. The photocurrent decreased with an increase in the concentration of Cu²⁺ ions. The photoelectrode response for Cu²⁺ ion detection had a linear range of 0.5–120 μM, with a limit of detection (LoD) of 16 nM. The proposed PEC sensor displayed ultra-sensitivity and good selectivity toward Cu²⁺ ion detection.

A Robust Luminescent Tb(III)-MOF with Lewis Basic Pyridyl Sites for the Highly Sensitive Detection of Metal Ions and Small Molecules

A new luminescent terbium-metal-organic framework [Tb3(L)2(HCOO)(H2O)5]·DMF·4H2O (1) (H4L = 4,4'-(pyridine-3,5-diyl)diisophthalic acid) has been successfully assembled by Tb(3+) ions and an undeveloped pyridyl-tetracarboxylate. Compound 1 exhibits a 3D porous (3,8)-connected (4.5(2))2(4(2).5(12).6(6).7(5).8(3)) topological framework with fascinating 1D open hydrophilic channels decorated by uncoordinated Lewis basic pyridyl nitrogen atoms. In particular, the Tb-MOF (1) can detect Cu(2+) ions with high selectivity and sensitivity, and its luminescence is nearly entirely quenched in N,N-dimethylformamide (DMF) solution and biological system. In addition, 1 still has high detection for the trace content of nitromethane with 70 ppm, which suggests that 1 is a promising example of dual functional materials with sensing copper ions and nitromethane.

Utilization of reduced graphene oxide/cadmium sulfide-modified carbon cloth for visible-light-prompt photoelectrochemical sensor for copper (II) ions

A newly developed CdS/rGO/CC electrode was prepared based on a flexible carbon cloth (CC) substrate with cadmium sulfide (CdS) nanoparticles and reduced graphene oxide (rGO). The CdS was synthesized using an aerosol-assisted chemical vapor deposition (AACVD) method, and the graphene oxide was thermally reduced on the modified electrode surface. The existence of rGO in the CdS-modified electrode increased the photocurrent intensity of the CdS/rGO/CC-modified electrode by three orders of magnitude, compared to that of the CdS/ITO electrode and two orders of magnitude higher than the CdS/CC electrode. A new visible-light-prompt photoelectrochemical sensor was developed based on the competitive binding reaction of Cu(2+) and CdS on the electrode surface. The results showed that the effect of the Cu(2+) on the photocurrent response was concentration-dependent over the linear ranges of 0.1-1.0 μM and 1.0-40.0 μM with a detection limit of 0.05 μM. The results of a selectivity test showed that this modified electrode has a high response toward Cu(2+) compared to other heavy metal ions. The proposed CdS/rGO/CC electrode provided a significantly high potential current compared to other reported values, and could be a practical tool for the fast, sensitive, and selective determination of Cu(2+).

Fluorescent yeast containing intracellularly biosynthesized CdSe QDs as a sensitive probe for simple determination of copper(ii) in water and plasma

CdSe QDs were attentively biosynthesized in yeast, and these yeasts can be used as a fluorescent probe for tracing Cu²⁺in water and plasma.