Molecular Imprinting: Green Perspectives and Strategies

Advances in revolutionary technologies pose new challenges for human life; in response to them, global responsibility is pushing modern technologies toward greener pathways. Molecular imprinting technology (MIT) is a multidisciplinary mimic technology simulating the specific binding principle of enzymes to substrates or antigens to antibodies; along with its rapid progress and wide applications, MIT faces the challenge of complying with green sustainable development requirements. With the identification of environmental risks associated with unsustainable MIT, a new aspect of MIT, termed green MIT, has emerged and developed. However, so far, no clear definition has been provided to appraise green MIT. Herein, the implementation process of green chemistry in MIT is demonstrated and a mnemonic device in the form of an acronym, GREENIFICATION, is proposed to present the green MIT principles. The entire greenificated imprinting process is surveyed, including element choice, polymerization implementation, energy input, imprinting strategies, waste treatment, and recovery, as well as the impacts of these processes on operator health and the environment. Moreover, assistance of upgraded instrumentation in deploying greener goals is considered. Finally, future perspectives are presented to provide a more complete picture of the greenificated MIT road map and to pave the way for further development.

Synthesis of molecularly imprinted polymers using a functionalized initiator for chiral-selective recognition of propranolol

We present a new concept of synthesis for preparation of molecularly imprinted polymers using a functionalized initiator to replace the traditional functional monomer. Using propranolol as a model template, a carboxyl-functionalized radical initiator was demonstrated to lead to high-selectivity polymer particles prepared in a standard precipitation polymerization system. When a single enantiomer of propranolol was used as template, the imprinted polymer particles exhibited clear chiral selectivity in an equilibrium binding experiment. Unlike the previous molecular imprinting systems where the active free radicals can be distant from the template-functional monomer complex, the method reported in this work makes sure that the actual radical polymerization takes place in the vicinity of the template-associated functional groups. The success of using functional initiator to synthesize molecularly imprinted polymers brings in new possibilities to improve the functional performance of molecularly imprinted synthetic receptors.

Fabrication of Hypericin Imprinted Polymer Nanospheres via Thiol-Yne Click Reaction

To fabricate molecularly imprinted polymer nanospheres via click reaction, five different clickable compounds were synthesized and two types of click reactions (azide-alkyne and thiol-yne) were explored. It was found that molecularly imprinted polymer nanospheres could be successfully synthesized via thiol-yne click reaction using 3,5-diethynyl-pyridine (1) as the monomer, tris(3-mercaptopropionate) (tri-thiol, 5) as the crosslinker, and hypericin as the template (MIP⁻NSHs). The click polymerization completed in merely 4 h to produce the desired MIP⁻NSHs, which were characterized by FTIR, SEM, DLS, and BET, respectively. The reaction conditions for adsorption capacity and selectivity towards hypericin were optimized, and the MIP⁻NSHs synthesized under the optimized conditions showed a high adsorption capacity (Q = 6.03 μmol•g-1) towards hypericin. The imprinting factors of MIP⁻NSHs towards hypericin, protohypericin, and emodin were 2.44, 2.88, and 2.10, respectively.

Dynamic assembly of molecularly imprinted polymer nanoparticles

Manipulation of specific binding and recycling of materials are two important aspects for practical applications of molecularly imprinted polymers. In this work, we developed a new approach to control the dynamic assembly of molecularly imprinted nanoparticles by surface functionalization. Molecularly imprinted polymer nanoparticles with a well-controlled core-shell structure were synthesized using precipitation polymerization. The specific binding sites were created in the core during the first step imprinting reaction. In the second polymerization step, epoxide groups were introduced into the particle shell to act asan intermediate linker to immobilize phenylboronic acids, as well as to introduce cis-diol structures on surface. The imprinted polymer nanoparticles modified with boronic acid and cis-diol structures maintained high molecular binding specificity, and the nanoparticles could be induced to form dynamic particle aggregation that responded to pH variation and chemical stimuli. The possibility of modulating molecular binding and nanoparticle assembly in a mutually independent fashion can be exploited in a number of applications where repeated use of precious nanoparticles is needed.

Molecular imprinting: perspectives and applications

This critical review presents a survey of recent developments in technologies and strategies for the preparation of MIPs, followed by the application of MIPs in sample pretreatment, chromatographic separation and chemical sensing.

Nanohybrid polymer brushes on silica for bioseparation

Surface-initiated atom transfer radical polymerization and click chemistry are used to synthesize temperature-responsive polymer brushes for glycoprotein separation.

A modular approach for assembling turn-on fluorescence sensors using molecularly imprinted nanoparticles

Combining straightforward molecular imprinting with orthogonal click chemistry and accessible fluorescent dyes, a modular approach has been developed to assemble turn-on optical sensors based on fluorescence resonance energy transfer in molecularly imprinted nanoparticles.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

On the influence of crosslinker on template complexation in molecularly imprinted polymers: a computational study of prepolymerization mixture events with correlations to template-polymer recognition behavior and NMR spectroscopic studies

Aspects of the molecular-level basis for the function of ethylene glycol dimethacrylate and trimethylolproprane trimethacrylate crosslinked methacrylic acid copolymers molecularly imprinted with (S)-propranolol have been studied using a series of all-component and all-atom molecular dynamics studies of the corresponding prepolymerization systems. The crosslinking agents were observed to contribute to template complexation, and the results were contrasted with previously reported template-recognition behavior of the corresponding polymers. Differences in the extent to which the two crosslinkers interacted with the functional monomer were identified, and correlations were made to polymer-ligand recognition behavior and the results of nuclear magnetic resonance spectroscopic studies studies. This study demonstrates the importance of considering the functional monomer–crosslinker interaction when designing molecularly imprinted polymers, and highlights the often neglected general contribution of crosslinker to determining the nature of molecularly imprinted polymer-template selectivity.

Molecularly imprinted polymer beads for nicotine recognition prepared by RAFT precipitation polymerization: a step forward towards multi-functionalities

Molecularly imprinted polymer beads synthesized by RAFT precipitation polymerization enable versatile surface functionalization and new applications.

Photoconjugation of molecularly imprinted polymer with magnetic nanoparticles

Because of their synthetic accessibility, molecularly imprinted polymer (MIP) nanoparticles are ideal building blocks for preparing multifunctional composites. In this work, we developed a general photocoupling chemistry to enable simple conjugation of MIP nanoparticles with inorganic magnetic nanoparticles. We first synthesized MIP nanoparticles using propranolol as a model template and perfluorophenyl azide-modified silica-coated magnetic nanoparticles. Using a simple photoactivation followed by facile purification with a magnet, we obtained magnetic composite particles that showed selective uptake of propranolol. We characterized the nanoparticles and composite materials using FT-IR, TEM, fluorescence spectroscopy, and radioligand binding analysis. Through the high molecular selectivity of the magnetic composite, we demonstrated the nondestructive feature and the high efficiency of the photocoupling chemistry. The versatile photoconjugation method developed in this work should also be very useful for combining organic MIPs with other inorganic nanoparticles to enable new chemical sensors and high efficiency photocatalysts.

Molecularly imprinted photocatalyst with a structural analogue of template and its application

To realize selective mineralization of low-level chlorophenols (CPs) in the presence of high-level ordinary pollutants, molecularly imprinted polymers (MIPs) coated photocatalyst was prepared using substrate analog as template. The pseudo-template imprinted photocatalysts showed rapid decomposition ability toward a group of CPs. Based on the complete dechlorination and spectrophotometry, a new method was proposed to detect the total organochlorine on CPs in water samples. The method showed good linearity when the concentrations of the total organochlorine on CPs is in the range of 12.0-200.0μmolL(-1). The detection limit is 1μmolL(-1) for this method. When this method was applied to measure the total organochlorine of the CPs in both tap water and river water samples, an average recovery ranged from 96.3% to 105.1% was obtained with RSD values less than 5%. In this green and simple method, the common inorganic ions in water showed no interference for the detection. The determination of the total organochlorine on the CPs might be used for estimation of the toxicity and the persistence of the water samples.

Electrospun azido-PCL nanofibers for enhanced surface functionalization by click chemistry

This paper reports highly surface functionalized and "clickable" α,ω-azido-poly(ε-caprolactone) fibers (f-PCL-N(3)), obtained by classical electrospinning setup. Azide-functionalized PCL was obtained from a commercially available α,ω-poly(ε-caprolactone)-diol, PCL(2), and electrospun with a nonderivative high-molecular-weight PCL. Successful chemical modifications of PCL(2) were confirmed by NMR, FTIR and MALDI-TOF mass spectroscopy. The high content of surface azides, as a response to the high electric field applied, was characterized using a colorimetric assay. In addition, azide reduction to amines revealed a nondestructive route for highly amine-functionalized fibers. Fluorescence labeling of f-PCL-N(3) fibers with FITC-alkyne fluorophore proved that the azide groups are mainly surface-localized as well as highly available for click-chemistry coupling.

Ionic bis-nanoparticle networks

ABSTRACT

A newly arising challenge in the field of nanoparticle research concerns the control and the understanding of the interparticle interactions and interparticle properties. This should allow the development of materials based on nanoparticle assemblies which represents a great opportunity to exploit nanoparticle collective properties. Although some nanoparticle networks have been reported, few works are addressing the highly exciting problem of forming bis-nanoparticle assemblies in which two different types of nanoparticles are present. In this article we report an original synthesis pathway for the formation of an ionic bis-nanoparticle network, silica/silver, based on the formation of an imidazolium bridging unit. The reaction used for the formation of the bridging imidazolium can be considered as click-like chemistry. The synthesis of the metal/metal oxide hybrid composite material starts from the formation of a metal oxide nanoparticle modified with an imidazole ligand. This composite formation is therefore very general and could be extended to other metal/metal oxide composites.

GRAPHICAL ABSTRACT

.