Fabrication of high-performance MXene-based all-solid-state flexible microsupercapacitor based on a facile scratch method

MXenes have emerged as promising electrode materials for microsupercapacitors (MSCs) owing to their high volumetric and areal capacitances. In addition to the development of novel electrode materials, fabrication of interdigital electrodes is another key to realize high-performance MSCs. Herein, we demonstrate the patterning of few-layered Ti₃C₂T _x nanosheets on various substrates for MSCs by a facile, fast, and nearly zero-cost 'scratch' strategy. The fabricated Ti₃C₂T _x -based all-solid-state MSC achieves a high areal capacitance of 25.5 mF cm^-2, which benefits from the unique layered structure and high electrical conductivity of the electrode. The fabricated planar MSC also delivers good cycling stability and excellent flexibility. Moreover, our fabrication strategy can be readily extended to other composite films for MSCs and become potential micropower sources for miniaturized electronic devices.

Reactions in ultra-small droplets by tip-assisted chemistry

The confinement of chemical reactions within small droplets has received much attention in the last few years. This approach has been proved successful for the in-depth study of naturally occurring chemical processes as well as for the synthesis of different sets of nanomaterials with control over their size, shape and properties. Different approaches such as the use of self-contained structures or microfluidic generated droplets have been followed over the years with success. However, novel approaches have emerged during the last years based on the deposition of femtolitre-sized droplets on surfaces using tip-assisted lithographic methods. In this feature article, we review the advances made towards the use of these ultra-small droplets patterned on surfaces as confined nano-reactors.

Self-assembly of graphene oxide at interfaces

Due to its amphiphilic property, graphene oxide (GO) can achieve a variety of nanostructures with different morphologies (for example membranes, hydrogel, crumpled particles, hollow spheres, sack-cargo particles, Pickering emulsions, and so on) by self-assembly. The self-assembly is mostly derived from the self-concentration of GO sheets at various interfaces, including liquid-air, liquid-liquid and liquid-solid interfaces. This paper gives a comprehensive review of these assembly phenomena of GO at the three types of interfaces, the derived interfacial self-assembly techniques, and the as-obtained assembled materials and their properties. The interfacial self-assembly of GO, enabled by its fantastic features including the amphiphilicity, the negatively charged nature, abundant oxygen-containing groups and two-dimensional flexibility, is highlighted as an easy and well-controlled strategy for the design and preparation of functionalized carbon materials, and the use of self-assembly for uniform hybridization is addressed for preparing hybrid carbon materials with various functions. A number of new exciting and potential applications are also presented for the assembled GO-based materials. This contribution concludes with some personal perspectives on future challenges before interfacial self-assembly may become a major strategy for the application-targeted design and preparation of functionalized carbon materials.

Multiplexed biomimetic lipid membranes on graphene by dip-pen nanolithography

The application of graphene in sensor devices depends on the ability to appropriately functionalize the pristine graphene. Here we show the direct writing of tailored phospholipid membranes on graphene using dip-pen nanolithography. Phospholipids exhibit higher mobility on graphene compared with the commonly used silicon dioxide substrate, leading to well-spread uniform membranes. Dip-pen nanolithography allows for multiplexed assembly of phospholipid membranes of different functionalities in close proximity to each other. The membranes are stable in aqueous environments and we observe electronic doping of graphene by charged phospholipids. On the basis of these results, we propose phospholipid membranes as a route for non-covalent immobilization of various functional groups on graphene for applications in biosensing and biocatalysis. As a proof of principle, we demonstrate the specific binding of streptavidin to biotin-functionalized membranes. The combination of atomic force microscopy and binding experiments yields a consistent model for the layer organization within phospholipid stacks on graphene.

The sensitivity and selectivity of graphene-based biosensors depends on attaching various functional groups to graphene. Hirtz et al. use dip-pen nanolithography to directly write phospholipid membranes on graphene, which enables multiplexed and heterogeneous non-covalent functionalization.

Investigation of MoS₂ and graphene nanosheets by magnetic force microscopy

For the first time, magnetic force microscopy (MFM) is used to characterize the mechanically exfoliated single- and few-layer MoS2 and graphene nanosheets. By analysis of the phase and amplitude shifts, the magnetic response of MoS2 and graphene nanosheets exhibits the dependence on their layer number. However, the solution-processed single-layer MoS2 nanosheet shows the reverse magnetic signal to the mechanically exfoliated one, and the graphene oxide nanosheet has not shown any detectable magnetic signal. Importantly, graphene and MoS2 flakes become nonmagnetic when they exceed a certain thickness.

Graphene oxide scrolls on hydrophobic substrates fabricated by molecular combing and their application in gas sensing

Well-aligned graphene oxide (GO) scrolls are prepared through the controlled folding/scrolling of single-layer GO sheets using molecular combing on hydrophobic substrates, such as aged gold substrate, polydimethylsiloxane film, poly(L-lactic acid) film, and octadecyltrimethoxysilane-modified silicon dioxide. As a proof of concept, the gas sensor fabricated with a single reduced GO scroll is used to detect NO(2) gas with a concentration as low as 0.4 ppm.

Nanobionics: the impact of nanotechnology on implantable medical bionic devices

The nexus of any bionic device can be found at the electrode-cellular interface. Overall efficiency is determined by our ability to transfer electronic information across that interface. The nanostructure imparted to electrodes plays a critical role in controlling the cascade of events that determines the composition and structure of that interface. With commonly used conductors: metals, carbon and organic conducting polymers, a number of approaches that promote control over structure in the nanodomain have emerged in recent years with subsequent studies revealing a critical dependency between nanostructure and cellular behaviour. As we continue to develop our understanding of how to create and characterise electromaterials in the nanodomain, this is expected to have a profound effect on the development of next generation bionic devices. In this review, we focus on advances in fabricating nanostructured electrodes that present new opportunities in the field of medical bionics. We also briefly evaluate the interactions of living cells with the nanostructured electromaterials, in addition to highlighting emerging tools used for nanofabrication and nanocharacterisation of the electrode-cellular interface.