Plasmonic Nanostructures Grown from Reacting Droplet-In-Microwell Array on Flexible Films for Quantitative Surface-Enhanced Raman Spectroscopy in Plant Wearable In Situ Detection

Plant wearable detection has garnered significant interest in advancing agricultural intelligence and promoting sustainable food production amidst the challenges of climate change. Accurately monitoring plant health and agrochemical residue levels necessitates qualities such as precision, affordability, simplicity, and noninvasiveness. Here, a novel attachable plasmonic film is introduced and designed for on-site detection of agrochemical residues utilizing surface-enhanced Raman spectroscopy (SERS). By functionalizing a thin polydimethylsiloxane film with silver nanoparticles via controlled droplet reactions in micro-well arrays, a plasmonic film is achieved that not only maintains optical transparency for precise analyte localization but also conforms closely to the plant surface, facilitating highly sensitive SERS measurements. The reliability of this film enables accurate identification and quantification of individual compounds and their mixtures, boasting an ultra-low detection limit ranging from 10-16 to 10-13 m, with mini mal relative standard deviation. To showcase its potential, on-field detection of pesticide residues on fruit surfaces is conducted using a handheld Raman spectrometer. This advancement in fabricating plasmonic nanostructures on flexible films holds promise for expanding SERS applications beyond plant monitoring, including personalized health monitoring, point-of-care diagnosis, wearable devices for human-machine interface, and on-site monitoring of environmental pollutants.

Nanostructured N, S, and P-Doped Elaeagnus Angustifolia Gum-Derived Porous Carbon with Electrodeposited Silver for Enhanced Electrochemical Sensing of Acetaminophen

Acetaminophen (N-acetyl-p-aminophenol, APAP) is regularly used for antipyretic and analgesic purposes. Overdose or long-term exposure to APAP could lead to liver damage and hepatotoxicity. In this study, the approach of enhanced electrochemical detection of APAP by nanostructured biomass carbon/silver was developed. Porous biomass carbon derived from Elaeagnus Angustifolia gum was prepared by pyrolysis with co-doping of electron-rich elements of nitrogen, sulfur, and phosphorus. The electrodeposition of silver onto a glassy carbon electrode modified with porous carbon could enhance the sensing signal towards APAP. Two linear ranges from 61 nM to 500 μM were achieved with a limit of detection of 33 nM. The developed GCE sensor has good anti-interference, stability, reproducibility, and human urine sample analysis performance. The silver-enhanced biomass carbon GCE sensor extends the application of biomass carbon, and its facile preparation approach could be used in constructing disposable sensing chips in the future.

A novel and portable electrochemical sensor for 5-hydroxymethylfurfural detection using silver microdendrite electrodeposited paper-based electrode

A lab-made screen-printed carbon electrode was fabricated on poster paper and modified with silver microdendrites for the determination of 5-hydroxymethylfurfural in honey.

Correlation of Morphology and Crystal Structure of Metal Powders Produced by Electrolysis Processes

In this review paper, morphologies of metal powders produced by the constant (potentiostatic and galvanostatic) regimes of electrolysis from aqueous electrolytes are correlated with their crystal structure at the semiquantitative level. The main parameters affecting the shape of powder particles are the exchange current density (rate of electrochemical process) and overpotential for hydrogen evolution reaction. Depending on them, various shapes of dendrites (the needles, the two-dimensional (2D) fern-like, and the three-dimensional (3D) pine-like dendrites), and the particles formed under vigorous hydrogen evolution (cauliflower-like and spongy-like particles) are produced by these regimes of electrolysis. By decreasing the exchange current density value, the crystal structure of the powder particles is changed from the strong (111) preferred orientation obtained for the needle-like (silver) and the 2D (lead) dendrites to the randomly orientated crystallites in particles with the spherical morphology (the 3D dendrites and the cauliflower-like and the spongy-like particles). The formation of metal powders by molten salt electrolysis and by electrolysis in deep eutectic solvents (DESs) and the crystallographic aspects of dendritic growth are also mentioned in this review.

In-situ green synthesis of fluorescent silica-silver conjugate nanodendrites using nanoporous frustules of diatoms: an unprecedented approach

Generally, nanodendrite synthesis is chemical mediated and expensive. The biogenesis of such hierarchical structures is still in its nascent stage. The present study aimed at exploiting the nanoporous frustules of Halamphora subturgida, as a source of biosilica for the biosynthesis and stabilization of conjugate nanodendrites of silica and silver. These minute diatom frustules when exposed to 9 mM of silver nitrate solution, a highly crystalline nanohybride dendrites were synthesized. The nanohybrid dendrite synthesis was initially confirmed by the formation of greyish-brown frustules after 72 h of exposure. The composite dendrites were thoroughly characterized by standard techniques. Electron microscopic images illustrated that the process began with the formation of isotropic hybrid nanospheres with an internal diameter of 20 nm and continued to develop anisotropic nanocrystals with time. The nanodendrites externally formed on the siliceous frustules, acting as a template for the former. They were characterized by distinct 100 nm wide and 1-2 µm long trunks and 70-100 nm wide and 220-220 nm long branches on either side of the trunk. The optical measurement revealed the fluorescence property of the nanostructures owing to the photoluminescent efficiency of the frustules. Both the externally derived hybrid nanodendrites and internally synthesized nanospheres possessed superior stability in the suspension with a zeta potential value of - 35.7 mV and - 24.8 mV, respectively. Thus, this method is eco-friendly and provides a new dimension for nanodendrite synthesis with minimal cost and maximal yield compared to its non-biologically synthesized counterparts that involve several other drawbacks like chemical hazards and high energy consumption.

One-step green synthesis of 2D Ag-dendrite-embedded biopolymer hydrogel beads as a catalytic reactor

Silver (Ag) nanocrystals with a dendritic structure have attracted intensive attention because of their unique structural properties, which include abundant sharp corners and edges that provide a large number of active atoms. However, the synthesis of Ag dendrites via a simple and environmentally friendly method under ambient conditions remains a challenge. In this paper, we report a simple water-based green method for the production of biopolymer hydrogel beads embedded with Ag dendrites without using an additional reducing agent, stabilizer, or crosslinking agent. The obtained Ag dendrites exhibit a unique two-dimensional (2D) structure rather than a conventional three-dimensional structure because Ag⁺ ions are reduced on the surface of the solid-phase hydrogel beads and grow into crystals. Reasonable mechanisms explaining the formation of the nanocomposite hydrogel beads and the formation of 2D Ag dendrites in the hydrogel are proposed on the basis of our observations and results. The hydrogel beads embedded the 2D Ag dendrites were used as an environmentally friendly catalytic reactor, and their catalytic performance was evaluated by adopting the reduction of 4-nitrophenol to 4-aminophenol with NaBH₄ as a model reaction.

Alginate hydrogel beads embedded with 2D Ag dendrites were synthesized by simply adding aqueous alginate droplets to an aqueous AgNO₃ solution.

Robust and cost-effective silver dendritic nanostructures for SERS-based trace detection of RDX and ammonium nitrate

We report the fabrication and performance evaluation of cost-effective, reproducible silver nanodendrite (AgND) substrates, possessing high-density trunks and branches, achieved by a simple electroless etching process and subsequently utilized them for the trace detection of 1,3,5-trinitroperhydro-1,3,5-triazine (Research Development Explosive, RDX) and Ammonium Nitrate (AN). The intricate structural features in AgNDs offer high-density hotspots for effective molecular detection based on the surface enhanced Raman scattering (SERS) technique. The active SERS-substrate was initially tested with standard Rhodamine 6G (R6G) molecules at 1 nM concentration, which established an effective enhancement factor (EF) of ∼108. The AgNDs were subsequently utilized in the detection of the explosives RDX and AN, down to concentrations of 1 μM. The typical EF achieved in the case of RDX and AN was ∼104. The sensitivity of 1 μM R6G was further enhanced by two-fold through the deposition of Au nanoparticles on the AgNDs. The reproducibility of the low-cost substrate was also demonstrated, with a ∼9% RSD value in the measurements.

Simultaneous growth of spherical, bipyramidal and wire-like gold nanostructures in solid and solution phases: SERS and electrocatalytic applications

Anisotropic growth of Au nanostructures including bipyramidal and nanowires on ITO substrate was achieved by in situ electrochemical reduction of Au⁺ ions from the growth solution. The AuNS grown ITO substrates were utilized for SERS and electrochemical reduction of hydrogen peroxide.

Electrochemical deposition of layered copper thin films based on the diffusion limited aggregation

In this work layered copper films with smooth surface were successfully fabricated onto ITO substrate by electrochemical deposition (ECD) and the thickness of the films was nearly 60 nm. The resulting films were characterized by SEM, TEM, AFM, XPS, and XRD. We have investigated the effects of potential and the concentration of additives and found that 2D dendritic-like growth process leaded the formation of films. A suitable growth mechanism based on diffusion limited aggregation (DLA) mechanism for the copper films formation is presented, which are meaningful for further designing homogeneous and functional films.

Toehold-mediated DNA displacement-based surface-enhanced Raman scattering DNA sensor utilizing an Au-Ag bimetallic nanodendrite substrate

A simple and sensitive surface enhanced Raman scattering (SERS)-based DNA sensor that utilizes the toehold-mediated DNA displacement reaction as a target-capturing scheme has been demonstrated. For a SERS substrate, Au-Ag bimetallic nanodendrites were electrochemically synthesized and used as a sensor platform. The incorporation of both Ag and Au was employed to simultaneously secure high sensitivity and stability of the substrate. An optimal composition of Ag and Au that satisfied these needs was determined. A double-strand composed of 'a probe DNA (pDNA)' complementary to 'a target DNA (tDNA)' and 'an indicator DNA tagged with a Raman reporter (iDNA)' was conjugated on the substrate. The conjugation made the reporter molecule close to the surface and induced generation of the Raman signal. The tDNA released the pre-hybridized iDNA from the pDNA via toehold-mediated displacement, and the displacement of the iDNA resulted in the decrease of Raman intensity. The variation of percent intensity change was sensitive and linear in the concentration range from 200fM to 20nM, and the achieved limit of detection (LOD) was 96.3fM, superior to those reported in previous studies that adopted different signal taggings based on such as fluorescence and electrochemistry.

Facile electrochemical synthesis of titanium dioxide dendrites and their electrochemical properties

Titanium dioxide dendrites were successfully prepared by a simple electrochemical deposition technique in acidic solution.

Electrodeposition of Ag nanosheet-assembled microsphere@Ag dendrite core–shell hierarchical architectures and their application in SERS

Ag nanosheet-assembled microsphere@Ag dendrite core–shell hierarchical architectures with excellent SERS performance are successfully synthesized.