Exploring Recent Developments in Graphene-Based Cathode Materials for Fuel Cell Applications: A Comprehensive Overview

Fuel cells are at the forefront of modern energy research, with graphene-based materials emerging as key enhancers of performance. This overview explores recent advancements in graphene-based cathode materials for fuel cell applications. Graphene's large surface area and excellent electrical conductivity and mechanical strength make it ideal for use in different solid oxide fuel cells (SOFCs) as well as proton exchange membrane fuel cells (PEMFCs). This review covers various forms of graphene, including graphene oxide (GO), reduced graphene oxide (rGO), and doped graphene, highlighting their unique attributes and catalytic contributions. It also examines the effects of structural modifications, doping, and functional group integrations on the electrochemical properties and durability of graphene-based cathodes. Additionally, we address the thermal stability challenges of graphene derivatives at high SOFC operating temperatures, suggesting potential solutions and future research directions. This analysis underscores the transformative potential of graphene-based materials in advancing fuel cell technology, aiming for more efficient, cost-effective, and durable energy systems.

Literature Review on Power Battery Echelon Reuse and Recycling from a Circular Economy Perspective

Developing new energy vehicles (NEVs) is necessary to grow the low-carbon vehicle industry. Many concentrated end-of-life (EoL) power batteries will cause large-scale environmental pollution and safety accidents when the time comes to replace the first generation of batteries if improper recycling and disposal methods are utilized. Significant negative externalities will result for the environment and other economic entities. When recycling EoL power batteries, some countries need to solve problems about lower recycling rates, unclear division of echelon utilization scenarios, and incomplete recycling systems. Therefore, this paper first analyzes representative countries' power battery recycling policies and finds out the reasons for the low recycling rate in some countries. It is also found that echelon utilization is the critical link to EoL power battery recycling. Secondly, this paper summarizes the existing recycling models and systems to form a complete closed-loop recycling process from the two stages of consumer recycling and corporate disposal of batteries. The policies and recycling technologies are highly concerned with echelon utilization, but few studies focus on analyzing application scenarios of echelon utilization. Therefore, this paper combines cases to delineate the echelon utilization scenarios clearly. Based on this, the 4R EoL power battery recycling system is proposed, which improves the existing recycling system and can recycle EoL power batteries efficiently. Finally, this paper analyzes the existing policy problems and existing technical challenges. Based on the actual situation and future development trends, we propose development suggestions from the government, enterprises, and consumers to achieve the maximum reused of EoL power batteries.

Promoted glucose electrooxidation at Ni(OH)2/graphene layers exfoliated facilely from carbon waste material

Nowadays, the glucose electro-oxidation reaction (GOR) is considered one of the most important solutions for environmental pollution. The GOR is the anodic reaction in direct glucose fuel cells and hybrid water electrolysis. In this study, the GOR is boosted using a carbon support modified with Ni(OH)2 as a non-precious catalyst. The carbon support, with in situ generated graphene nanosheets having a large surface area, grooves, and surface functional groups, is prepared via a simple electrochemical treatment of the carbon rods of an exhausted zinc-carbon battery. Ni(OH)2 is electrodeposited on the surface of the functionalized exfoliated graphite rod (FEGR) via the dynamic hydrogen bubbling technique (DHBT) and tested for GOR. The thus-prepared Ni(OH)2/FEGR electrode is characterized by SEM, mapping EDX, HR-TEM, XRD, and XPS characterization tools. Ni(OH)2/FEGR displays an onset potential of 1.23 V vs. the reversible hydrogen electrode (RHE) and attains high current densities at lower potentials. Additionally, Ni(OH)2/FEGR showed prolonged stability toward GOR by supporting a constant current over a long electrolysis time. The enhanced catalytic performance is attributed to the superb ionic and electronic conductivity of the catalyst. Importantly, ionic conductivity increased, due to (i) a large surface area of in situ generated graphene layers, (ii) enhanced distribution of active material during deposition using DHBT, and (iii) increased hydrophilicity of the underlying substrate. Therefore, the Ni(OH)2/FEGR electrode can be used efficiently for GOR as a low-cost catalyst, achieving low onset potential and high current densities at low potentials.

Coupling solute interactions with functionalized graphene membranes: towards facile membrane-level engineering

Optimizing ion transport through nanoporous graphene membranes with intricate engineering at nanoscale levels finds applications ranging from ion segregation to desalination. Such membrane-level engineering often requires futuristic and state-of-the-art micro- and nanofabrication infrastructure making it less accessible to widespread applications. In this study, the effective membrane pore size is modulated using macroscopic membrane functionalization, which, when combined with the solute concentration, can prove to be facile nanoscale engineering towards achieving selectivity. By performing robust molecular dynamics (MD) simulations of aqueous NaCl solution through a nanoporous graphene membrane, we demonstrate that varying membrane wettability influences the structural organization of ions and water molecules both in the vicinity and inside the nanopore, which is manifested in the form of altered permeation characteristics. Moreover, the disparate solvation characteristics of the ionic species in conjunction with the variable van der Waals interactive forces affect the ion-selective nature (Cl^- over Na⁺) of the membrane. The relative hydrophilization, resulting from the effective functionalization of the nanoporous graphene membrane, not only allows greater control over the permeation characteristics of ions and water molecules mediated by an altered depletion ratio but also gives rise to the ion-selective nature of the membrane, thus providing a sound understanding of the transport properties of ion-water solutions through nanoporous materials.

Graphene: A Path-Breaking Discovery for Energy Storage and Sustainability

The global energy situation requires the efficient use of resources and the development of new materials and processes for meeting current energy demand. Traditional materials have been explored to large extent for use in energy saving and storage devices. Graphene, being a path-breaking discovery of the present era, has become one of the most-researched materials due to its fascinating properties, such as high tensile strength, half-integer quantum Hall effect and excellent electrical/thermal conductivity. This paper presents an in-depth review on the exploration of deploying diverse derivatives and morphologies of graphene in various energy-saving and environmentally friendly applications. Use of graphene in lubricants has resulted in improvements to anti-wear characteristics and reduced frictional losses. This comprehensive survey facilitates the researchers in selecting the appropriate graphene derivative(s) and their compatibility with various materials to fabricate high-performance composites for usage in solar cells, fuel cells, supercapacitor applications, rechargeable batteries and automotive sectors.

First-principles study of two-dimensional C-silicyne nanosheet as a promising anode material for rechargeable Li-ion batteries

Li-ion batteries are one of the sustainable alternatives to meet the growing energy demands of an increasing population. However, finding a suitable negative electrode is key for improving battery performance. In the present work, first principles-based investigations are carried out to explore the capability of a planar 2D C-silicyne nanosheet - which is a Si analogue of α-graphyne having -CC- substitution - as an anode for improving the performance of Li-ion batteries. Thermally and dynamically stable C-silicyne sheets exhibit a metallic nature as inferred from the density of states studies. The average adsorption energies for sequential adsorption of the Li atom over the monolayer range from -1.35 to -0.46 eV, implying favourable interactions between the monolayer and the Li atom which indicate that during the lithiation process, clustering amongst the metal atoms is not preferred. The energy barrier for the migration of Li-ions is 0.21 eV, indicating an active charge/discharge process. A high storage capacity of 836.07 mA h g^-1 and a working potential of 0.60 V is obtained. A negligible amount of volume change of the C-silicyne monolayer after full lithiation is observed which implies good cyclability. All these outcomes imply that C-silicyne nanosheets are a potential anode material for next-generation LIBs.

Cellulose Nanocrystals (CNC)-Based Functional Materials for Supercapacitor Applications

The growth of industrialization and the population has increased the usage of fossil fuels, resulting in the emission of large amounts of CO_2. This serious environmental issue can be abated by using sustainable and environmentally friendly materials with promising novel and superior performance as an alternative to petroleum-based plastics. Emerging nanomaterials derived from abundant natural resources have received considerable attention as candidates to replace petroleum-based synthetic polymers. As renewable materials from biomass, cellulose nanocrystals (CNCs) nanomaterials exhibit unique physicochemical properties, low cost, biocompatibility and biodegradability. Among a plethora of applications, CNCs have become proven nanomaterials for energy applications encompassing energy storage devices and supercapacitors. This review highlights the recent research contribution on novel CNC-conductive materials and CNCs-based nanocomposites, focusing on their synthesis, surface functionalization and potential applications as supercapacitors (SCs). The synthesis of CNCs encompasses various pretreatment steps including acid hydrolysis, mechanical exfoliation and enzymatic and combination processes from renewable carbon sources. For the widespread applications of CNCs, their derivatives such as carboxylated CNCs, aldehyde-CNCs, hydride-CNCs and sulfonated CNC-based materials are more pertinent. The potential applications of CNCs-conductive hybrid composites as SCs, critical technical issues and the future feasibility of this endeavor are highlighted. Discussion is also extended to the transformation of renewable and low-attractive CNCs to conductive nanocomposites using green approaches. This review also addresses the key scientific achievements and industrial uses of nanoscale materials and composites for energy conversion and storage applications.

High Proton Conductivity of 3D Graphene Oxide Intercalated with Aromatic Sulfonic Acids

The development of efficient proton conductors that are capable of high power density, sufficient mechanical strength, and reduced gas permeability is challenging. Herein, we report the development of a series of aromatic sulfonic acid/graphene oxide hybrid membranes incorporating benzene sulfonic acid (BS), naphthalene sulfonic acid (NS), naphthalene disulfonic acid (DS) or pyrene sulfonic acid (PS) using a facile freeze dried method. For out-of-plane proton conductivity, the 3DGO-BS and 3DGO-NS yielded proton conductivities of 4.4×10-2  S cm-1 and 3.1×10-2  S cm-1 , respectively; this represents a two-times higher value than that which occurs for three dimensional graphene oxide (3DGO). Additionally, the respective prepared films as membranes in a proton exchange membrane fuel cell (PEMFC) show maximum power density of 98.76 mW cm-2 for 3DGO-NS while it is 92.75 mW cm-2 for 3DGO-BS which are close to double that obtained for 3DGO (50 mW cm-2 ).

Revealing Hydrogen States in Carbon Structures by Analyzing the Thermal Desorption Spectra

An effective methodology for the detailed analysis of thermal desorption spectra (TDS) of hydrogen in carbon structures at micro- and nanoscale was further developed and applied for a number of TDS data of one heating rate, in particular, for graphite materials irradiated with atomic hydrogen. The technique is based on a preliminary description of hydrogen desorption spectra by symmetric Gaussians with their special processing in the approximation of the first- and the second-order reactions. As a result, the activation energies and the pre-exponential factors of the rate constants of the hydrogen desorption processes are determined, analyzed and interpreted. Some final verification of the results was completed using methods of numerical simulation of thermal desorption peaks (non-Gaussians) corresponding to the first- and the second-order reactions. The main research finding of this work is a further refinement and/or disclosure of poorly studied characteristics and physics of various states of hydrogen in microscale graphite structures after irradiation with atomic hydrogen, and comparison with the related results for nanoscale carbon structures. This is important for understanding the behavior and relationship of hydrogen in a number of cases of high energy carbon-based materials and nanomaterials.

A molybdenum disulfide-reduced graphene oxide nanocomposite as an electrochemical sensing platform for detecting cyproterone acetate

Based on the synergistic effect of MoS2 and rGO, a MoS2-rGO nanocomposite film shows a wide linear range and high sensitivity towards cyproterone acetate.

Recent Advancements in the Synthesis and Application of Carbon-Based Catalysts in the ORR

Fuel cells are a promising alternative to non-renewable energy production industries such as petroleum and natural gas. The cathodic oxygen reduction reaction (ORR), which makes fuel cell technology possible, is sluggish under normal conditions. Thus, catalysts must be used to allow fuel cells to operate efficiently. Traditionally, platinum (Pt) catalysts are often utilized as they exhibit a highly efficient ORR with low overpotential values. However, Pt is an expensive and precious metal, posing economic problems for commercialization. Herein, advances in carbon-based catalysts are reviewed for their application in ORRs due to their abundance and low-cost syntheses. Various synthetic methods from different renewable sources are presented, and their catalytic properties are compared. Likewise, the effects of heteroatom and non-precious metal doping, surface area, and porosity on their performance are investigated. Carbon-based support materials are discussed in relation to their physical properties and the subsequent effect on Pt ORR performance. Lastly, advances in fuel cell electrolytes for various fuel cell types are presented. This review aims to provide valuable insight into current challenges in fuel cell performance and how they can be overcome using carbon-based materials and next generation electrolytes.

Influence of C=O groups on the optical extinction coefficient of graphene exfoliated in liquid phase

Liquid phase exfoliation of graphite is currently one of the most promising graphene production methods at large scale. For this reason, an accurate calculation of the concentration in graphene dispersions is important for standardization and commercialization. Here, graphene dispersions, at high concentrations, were produced by electrochemical exfoliation. Furthermore, a cleaner methodology to obtain graphene oxide by electrochemical exfoliation at high acid concentrations was implemented. The absorption coefficient for graphene and graphene oxide was determined in the optical range (α_660 nm= 1414 (±3%) ml mg^-1 m^-1andα_660 nm= 648 (±7%) ml mg^-1 m^-1, respectively) with an exponential dependence with the wavelength. The difference inαfor both materials is attributed to an increased presence of C=O groups as evidenced by Fourier transform infrared spectroscopy (FTIR), UV-vis and Raman spectroscopy, as well as, in the calculation of the optical extinction coefficient and optical band-gap via Tauc-plots.

Machine Learning for Estimating Electron Transfer Rates From Square Wave Voltammetry

Electrochemistry of surface-bound molecules is of high importance for numerous electronic and sensor applications. Extracting the electron transfer rate is beneficial for understanding surface-bound processes, but it requires experimental or computational rigor. We evaluate methods to determine electron transfer rates from large voltammetry sets from experiments via machine learning using decision tree ensembles, neural networks, and gaussian process regression models. We applied these to reproduce computational measures of electron transfer rates modeled by first principles. The best machine learning models were a random forest with 80 decision trees and a neural network with Bayesian regularization, producing root mean squared errors of 0.37 and 0.49 s-1 , respectively, corresponding to mean percent errors of 0.38 % and 0.52 %, respectively. This work establishes machine learning methods for rapidly acquiring electron transfer rates across large datasets for widespread applications.

Water at charged interfaces

The ubiquity of aqueous solutions in contact with charged surfaces and the realization that the molecular-level details of water-surface interactions often determine interfacial functions and properties relevant in many natural processes have led to intensive research. Even so, many open questions remain regarding the molecular picture of the interfacial organization and preferential alignment of water molecules, as well as the structure of water molecules and ion distributions at different charged interfaces. While water, solutes and charge are present in each of these systems, the substrate can range from living tissues to metals. This diversity in substrates has led to different communities considering each of these types of aqueous interface. In this Review, by considering water in contact with metals, oxides and biomembranes, we show the essential similarity of these disparate systems. While in each case the classical mean-field theories can explain many macroscopic and mesoscopic observations, it soon becomes apparent that such theories fail to explain phenomena for which molecular properties are relevant, such as interfacial chemical conversion. We highlight the current knowledge and limitations in our understanding and end with a view towards future opportunities in the field.

Progress and Prospects on the Fabrication of Graphene-Based Nanostructures for Energy Storage, Energy Conversion and Biomedical Applications

Graphene, a two-dimensional (2D) layered material has attracted much attention from the scientific community due to its exceptional electrical, thermal, mechanical, biological and optical properties. Hence, numerous applications utilizing graphene-based materials could be conceived in next-generation electronics, chemical and biological sensing, energy conversion and storage, and beyond. The interaction between graphene surfaces with other materials plays a vital role in influencing its properties than other bulk materials. In this review, we outline the recent progress in the production of graphene and related 2D materials, and their uses in energy conversion (solar cells, fuel cells), energy storage (batteries, supercapacitors) and biomedical applications.

Applications of Carbon in Rechargeable Electrochemical Power Sources: A Review

Rechargeable power sources are an essential element of large-scale energy systems based on renewable energy sources. One of the major challenges in rechargeable battery research is the development of electrode materials with good performance and low cost. Carbon-based materials have a wide range of properties, high electrical conductivity, and overall stability during cycling, making them suitable materials for batteries, including stationary and large-scale systems. This review summarizes the latest progress on materials based on elemental carbon for modern rechargeable electrochemical power sources, such as commonly used lead–acid and lithium-ion batteries. Use of carbon in promising technologies (lithium–sulfur, sodium-ion batteries, and supercapacitors) is also described. Carbon is a key element leading to more efficient energy storage in these power sources. The applications, modifications, possible bio-sources, and basic properties of carbon materials, as well as recent developments, are described in detail. Carbon materials presented in the review include nanomaterials (e.g., nanotubes, graphene) and composite materials with metals and their compounds.

Carbonaceous cathode materials for electro-Fenton technology: Mechanism, kinetics, recent advances, opportunities and challenges

Electro-Fenton (EF) technique has gained significant attention in recent years owing to its high efficiency and environmental compatibility for the degradation of organic pollutants and contaminants of emerging concern (CECs). The efficiency of an EF reaction relies primarily on the formation of hydrogen peroxide (H₂O₂) via 2e^─ oxygen reduction reaction (ORR) and the generation of hydroxyl radicals (^●OH). This could be achieved through an efficient cathode material which operates over a wide pH range (pH 3-9). Herein, the current progresses on the advancements of carbonaceous cathode materials for EF reactions are comprehensively reviewed. The insights of various materials such as, activated carbon fibres (ACFs), carbon/graphite felt (CF/GF), carbon nanotubes (CNTs), graphene, carbon aerogels (CAs), ordered mesoporous carbon (OMCs), etc. are discussed inclusively. Transition metals and hetero atoms were used as dopants to enhance the efficiency of homogeneous and heterogeneous EF reactions. Iron-functionalized cathodes widened the working pH window (pH 1-9) and limited the energy consumption. The mechanism, reactor configuration, and kinetic models, are explained. Techno economic analysis of the EF reaction revealed that the anode and the raw materials contributed significantly to the overall cost. It is concluded that most reactions follow pseudo-first order kinetics and rotating cathodes provide the best H₂O₂ production efficiency in lab scale. The challenges, future prospects and commercialization of EF reaction for wastewater treatment are also discussed.

2D Nanomaterials for Effective Energy Scavenging

The development of a nation is deeply related to its energy consumption. 2D nanomaterials have become a spotlight for energy harvesting applications from the small-scale of low-power electronics to a large-scale for industry-level applications, such as self-powered sensor devices, environmental monitoring, and large-scale power generation. Scientists from around the world are working to utilize their engrossing properties to overcome the challenges in material selection and fabrication technologies for compact energy scavenging devices to replace batteries and traditional power sources. In this review, the variety of techniques for scavenging energies from sustainable sources such as solar, air, waste heat, and surrounding mechanical forces are discussed that exploit the fascinating properties of 2D nanomaterials. In addition, practical applications of these fabricated power generating devices and their performance as an alternative to conventional power supplies are discussed with the future pertinence to solve the energy problems in various fields and applications.

Hybridized Graphene for Supercapacitors: Beyond the Limitation of Pure Graphene

Graphene-based supercapacitors have been attracting growing attention due to the predicted intrinsic high surface area, high electron mobility, and many other excellent properties of pristine graphene. However, experimentally, the state-of-the-art graphene electrodes face limitations such as low surface area, low electrical conductivity, and low capacitance, which greatly limit their electrochemical performances for supercapacitor applications. To tackle these issues, hybridizing graphene with other species (e.g., atom, cluster, nanostructure, etc.) to enlarge the surface area, enhance the electrical conductivity, and improve capacitance behaviors are strongly desired. In this review, different hybridization principles (spacers hybridization, conductors hybridization, heteroatoms doping, and pseudocapacitance hybridization) are discussed to provide fundamental guidance for hybridization approaches to solve these challenges. Recent progress in hybridized graphene for supercapacitors guided by the above principles are thereafter summarized, pushing the performance of hybridized graphene electrodes beyond the limitation of pure graphene materials. In addition, the current challenges of energy storage using hybridized graphene and their future directions are discussed.

First-principles study of a 2-dimensional C-silicyne monolayer as a promising anode in Na/K ion secondary batteries

With the depleting resources of energy and increasing demand, the need for sustainable and renewable energy resources has become the need of the hour. The low storage capacity of current materials for Na/K ion batteries has led to the quest to identify suitable materials for an electrode with excellent electrochemical properties. In the present work, a systematic theoretical investigation of C-silicyne, a planar 2-dimensional hexagonal lattice, is performed to establish the geometric and thermal properties and stability. The electronic properties illustrate the metallic nature of C-silicyne, which is conserved even after the effective adsorption of Na/K ions on the surface of the monolayer. For the practical functionality, the storage capacity of C-silicyne is evaluated as 591 mA h g-1 for Na ions and 443 mA h g-1 for K ions. Moreover, the low diffusion barriers for the Na (0.57 eV) and K (0.34 eV) ions display their feasible movement across the monolayer as the electrochemical cycle progresses. The average working voltage is found to lie in the range of 0.1-1 V, which is required for the effective functioning of the anode in a Na/K ion battery. These results demonstrate the potential of C-silicyne as a material for the anode in Na/K ion batteries.

Jackfruit Seed-Derived Nanoporous Carbons as the Electrode Material for Supercapacitors

Hierarchically porous activated carbon materials from agro-waste, Jackfruit seeds are prepared by a chemical activation method involving the treatment with zinc chloride (ZnCl2) at different temperatures (600–1000 °C). The electrochemical supercapacitance performances of the prepared materials were studied in an aqueous electrolyte (1 M sulfuric acid, H2SO4) in a three-electrode system. Jackfruit seed carbons display nanoporous structures consisting of both micro- and mesopore architectures and they are amorphous in nature and also contain oxygenated surface functional groups, as confirmed by powder X-ray diffraction (pXRD), Raman scattering, and Fourier-transformed infrared (FTIR) spectroscopy, respectively. The surface areas and pore volumes were found to be 1216.0 to 1340.4 m2·g−1 and 0.804 to 1.144 cm3·g−1, respectively, demonstrating the better surface textural properties compared to the commercial activated carbons. Due to the high surface area, large pore volume, and well developed hierarchical micro- and mesoporosity, the optimal sample achieved a high specific capacitance of 292.2 F·g−1 at 5 mV·s−1 and 261.3 F·g−1 at 1 A·g−1 followed by outstanding high rate capability. The electrode sustained 71.6% capacity retention at a high current density of 20 A·g−1. Furthermore, the electrode displayed exceptional cycling stability with small capacitance loss (0.6%) even after 10,000 charging–discharging cycles, suggesting that Jackfruit seed would have potential in low-cost and scalable production of nanoporous carbon materials for supercapacitors applications.

An Efficient Bifunctional Electrocatalyst of Phosphorous Carbon Co-doped MOFs

It is eager to develop high-performance and cheap bifunctional electrochemical catalysts for both of the oxygen reduction reaction (ORR) or oxygen evolution reaction (OER) for the energy crisis and environmental problems. Herein, we report a series of ZIF-derived Co-P-C co-doped polyhedral materials with a well-defined morphology. The optimized catalyst Co/P/MOFs-CNTs-700 exhibited favorable electrochemical activities with the lowest overpotential of 420 mV to achieve the current density of 10 mA cm^-2 for OER and the half potential of 0.8 V for ORR in 0.1 M NaOH. The performance can be well improved by doping phosphorous resource which greatly changed its morphology. Meanwhile, the doped carbon resources also improve the conductivity, which makes it a promising bifunctional electrochemical catalyst and can be comparable with the commercial electrocatalysts.

Optimizing the structural design of a nanocomposite catalyst layer for PEM fuel cells for improving mass-specific power density

For the purpose of redesigning a PEM fuel cell with ultralow Pt loading, this review comprehensively summarizes and comments on recent important findings on ultrathin catalyst layer structures. We introduce recent advances in electrocatalyst research and development (R&D), highlighting the urgency of ultralow Pt loading in the total design of PEM fuel cells. Following that, the reason for a thinner and more ordered electrode structure is presented for the next generation of PEM fuel cells. We then review recent progress in methods for preparing Pt nanoparticles on high-aspect-ratio supports, extended surface area of nanowires (confined agglomerates and nanowires) and ordered arrays. Regarding the ordered arrays, we expatiate on proton conductor arrays and electron conductor arrays, including carbon nanotube-assisted arrays, TiO₂ nanotube-assisted arrays, Co-OH-CO₃ nanowire-assisted arrays, and pigment red 149-assisted arrays. Challenges related to proton transport and transfer, electron conduction and mass transport are then discussed to supply further research direction.

Recent advances in catalysts, electrolytes and electrode engineering for the nitrogen reduction reaction under ambient conditions

With the conventional Haber-Bosch NH3 synthesis in industry requiring harsh pressures and high temperatures, artificial N2 fixation has been long sought after. The electrochemical nitrogen reduction reaction (NRR) could offer a solution by allowing NH3 production under ambient conditions. In this review, important recent findings on theoretical calculations and experimental exploration on the NRR at room temperature are systematically reviewed. Firstly, we discuss the mechanism of electrochemical heterogeneous catalysis for the NRR. The NRR is a multi-proton coupled electron transfer (PCET) process which implies that in addition to catalyst surface size effects, ligand and strain effects will also significantly influence the binding energy of the adsorbed N atoms, reaction intermediates and product species. Electrocatalysts including metals, metal nitrides, metal oxides and carbon-based materials will also be discussed at length. A linear scaling relationship seems to limit the NRR activity on most metals and metal oxides. Metal nitrides, however, follow the Mars-van Krevelen (MvK) mechanism which usually shows a lower potential energy barrier compared to the associative mechanism. Carbon-based materials and some single atom catalysts exhibit improved activity and selectivity due to ligand effects. Thus, electrolytes containing a proton donor might play a crucial role in the NRR. The limiting concentration of proton donors and the rate of proton transport to the active sites might be effective factors in boosting the selectivity of the NRR. Specifically, ionic liquids with high N2 solubility demonstrate much larger faradaic efficiency and would be promising candidates for use in NRR processes. Inspired by the characteristics of PCET, four strategies of electrode engineering were introduced including limiting protons, tuning the electron transport, modifying the electrode structure facilitating mass transport, and completely changing the NRR mechanism inspired by bio-nitrogenase and Li mediated N2 fixation.

Ethical, legal, social and economics issues of graphene

There are several applications and innovations of graphene that can change the world in the areas of energy, health, and electro-electronics. Graphene is ideal for bringing together the research sector and the industry, considering that the potential market is huge, as well as profitability. The purpose of this chapter is to present social, economic, ethical, and legal issues involving graphene. Among the existing research with the use of graphene, we can highlight an antibacterial role, acceleration of the internet, membranes that capture carbon dioxide. The global graphene market has an average annual growth of 32%. There is also a manual on processes for making graphene. However, intellectual property must be used in a way that respects its social function and further research on graphene is necessary due to the market trend and applications in several areas.

Properties of Mg/graphite and Mg/graphene as cathode electrode on primary cell battery

Since graphene was first isolated in 2004, it has become an attractive material on electrochemical energy storage devices. The purpose of this study is to compare Mg/graphite and Mg/graphene electrodes to commercial primary battery cathodes. This research is an experimental laboratory research. Graphene was synthesized with Hummer's method modified. Electrodes cathode of primary battery (Mg/graphite and Mg/graphene) were prepared using impregnation method. Graphene and electrodes cathode were analyzed with X-Ray Diffraction (XRD), Scanning Electron Microscope-Energy Dispersive X-Ray (SEM-EDX) and conductivity, respectively. The XRD data of graphene show that there is a weak and sharp peak on 2θ = 26,5o, indicating graphene is formed. The peaks shape of 2θ = 35o are totally different for Mg/graphite and Mg/graphene. At Mg/graphite, the sharp and narrow peak appears on 2θ = 35o. It means Mg is well deposited on graphite. Interestingly, Mg/graphene has narrow and weak peak on 2θ = 35o, indicating the Mg was deposited on graphene and properties of Mg has been changed by graphene. This data is also well confirmed by EDX data. Mg atoms exist on graphene (1.47 wt%) (EDX data). SEM images of Mg/graphite and Mg/graphene are significantly different, probably support material effect. The properties of Mg/graphite and Mg/graphene comparing to commercial primary battery cathode were evaluated using conductivity. The conductivity of Mg/graphene (1080 μS/cm) is highest among Mg/graphite (90 μS/cm) and commercial battery cathode (10 μS/cm). All of data show that the Mg/graphene is potentially used as a primary battery cathode.

One Step Synthesis of a Gold/Ordered Mesoporous Carbon Composite Using a Hard Template Method for Electrocatalytic Oxidation of Methanol and Colorimetric Determination of Glutathione

Ordered mesoporous carbon-supported gold nanoparticles (Au/OMC) have been fabricated in one step through a hard template method using gold nanoparticle-intercalated mesoporous silica (GMS) to explore two different catalytic properties, for example, electrocatalytic oxidation of methanol and colorimetric determination of glutathione (GSH). The catalytically inert but conducting nature of mesoporous carbon (OMC) and promising catalytic activity of gold nanoparticles (AuNPs) has inspired us to synthesize Au/OMC. The as-prepared Au/OMC catalyst was characterized by powder X-ray diffraction, N2 adsorption-desorption, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray analysis-elemental mapping, and X-ray photoelectron spectroscopy. The characterization results indicate that AuNPs are uniformly distributed on the surface of OMC. The conducting-OMC framework with a high surface area of Au/OMC provides superior transport of electrons through the porous surface of carbon matrix and resulted in its high efficiency and stability as an electrocatalyst for the oxidation of methanol in comparison to CMK-3, SBA-15, and GMS in alkaline medium. The efficiency of Au/OMC toward methanol oxidation in alkaline medium is much higher in comparison to that in acidic medium. The lower value of I f/I b in the acidic medium in comparison to that in the alkaline medium clearly indicates that the oxidation process with Au/OMC as a catalyst is much more superior in alkaline medium with better tolerance toward the accumulation of intermediate CO species on the active surface area. Furthermore, the Au/OMC catalyst is successfully utilized for the detection and quantification of GSH spectrophotometrically with a limit of detection value of 0.604 nM.

Tuning the Selectivity and Activity of Electrochemical Interfaces with Defective Graphene Oxide and Reduced Graphene Oxide

Engineered solid-liquid interfaces will play an important role in the development of future energy storage and conversion (ESC) devices. In the present study, defective graphene oxide (GO) and reduced graphene oxide (rGO) structures were used as engineered interfaces to tune the selectivity and activity of Pt disk electrodes. GO was deposited on Pt electrodes via the Langmuir-Blodgett technique, which provided compact and uniform GO films, and these films were subsequently converted to rGO by thermal reduction. Electrochemical measurements revealed that both GO and rGO interfaces on Pt electrodes exhibit selectivity toward the oxygen reduction reaction (ORR), but they do not have an impact on the activity of the hydrogen oxidation reaction in acidic environments. Scanning transmission electron microscopy at atomic resolution, along with Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), revealed possible diffusion sites for H₂ and O₂ gas molecules and functional groups relevant to the selectivity and activity of these surfaces. Based on these insights, rGO interfaces are further demonstrated to exhibit enhanced activity for the ORR in nonaqueous environments and demonstrate the power of our ex situ engineering approach for the development of next-generation ESC devices.

Polybenzimidazole/BaCe0.85Y0.15O3-δ nanocomposites with enhanced proton conductivity for high-temperature PEMFC application

The present work reports the synthesis of polybenzimidazole (PBI)/BaCe0.85Y0.15O3-δ nanocomposite membrane. The obtained membranes were investigated to use as novel electrolytes in high-temperature proton exchange fuel cells. The PBCYx membranes were prepared with dispersing BaCe0.85Y0.15O3-δ into the polyimidazole membrane by solution casting method. The obtained membranes were used as novel proton conductors. The thermal stability and structural properties were investigated. The conductivity and morphology of the obtained materials were studied using impedance spectroscopy AC (IS) and a scanning electron microscope (SEM) equipped with energy dispersive X-ray spectroscopy (EDX). The maximum phosphoric acid adsorption (175%) and protonic conductivity (0.092 S/cm at 180 °C under dry conditions) were observed for all of the PBI nanocomposite membranes containing 5 wt.% of BaCe0.85Y0.15O3-δ in the membrane matrix. The polarization and power density curves were studied at 150 and 180 °C operating temperatures. The power density of about 0.42 W/cm2 and current density of about 0.84 A/cm at 0.5 V and 180 °C were achieved under dry conditions. The data obtained from our studies showed that the physicochemical properties of the novel nanocomposites were enhanced for using in the high-temperature proton transfer fuel cells.

Optimization of reaction parameters affecting crystal phase growth and purity of BaCeO3 and BaCe1-xYbxO3-δ nanopowders and investigating high protonic conductivity of sulfonated poly(ether ether ketone) – BaCe0.85Yb0.15O3-δ composite membrane

Pure and ytterbium-doped BaCeO3 nanostructures were synthesized by solid-state reaction with the mixtures of Ba(NO3)2, BaCO3, (NH4)2Ce(NO3)6, and Yb2O3 at 800 °C for 10 and 24 h. Doping of ytterbium ions in the BaCeO3 host matrix has been studied and confirmed using powder X-ray diffraction. The results from the Rietveld analysis indicated that the sample has a main BaCeO3 structure with the space group of [Formula: see text]. Through intensive experiments and analysis, optimum reaction conditions for the synthesis of doped nanoparticles including the crystal phase impurity and reaction time are proposed. The results of the study showed that for the reaction time of 24 h, BaCO3 reacted more effectively with (NH4)2Ce(NO3)6 than Ba(NO3)2 did. On the other hand, the purity values of 97% and 95% were obtained for pure and Yb3+ doped BaCeO3 samples, respectively. Field emission scanning electron microscope images revealed that the synthesized BaCeO3 nanomaterials have mono-shaped sphere morphology. Furthermore, ytterbium-doped nanoparticles were incorporated into the matrix of sulfonated poly(ether ether ketone) (SPEEK) membranes (SPYb) with the aim of enhancing proton conductivity. The prepared SPYb nanocomposite membrane containing 1.7 wt.% of BaCe0.85Yb0.15O3-δ nanoparticles exhibited a high proton conductivity (67 mS/cm) at 80 °C.

Tunable Electronic Properties of Nitrogen and Sulfur Doped Graphene: Density Functional Theory Approach

We calculated the band structures of a variety of N- and S-doped graphenes in order to understand the effects of the N and S dopants on the graphene electronic structure using density functional theory (DFT). Band-structure analysis revealed energy band upshifting above the Fermi level compared to pristine graphene following doping with three nitrogen atoms around a mono-vacancy defect, which corresponds to p-type nature. On the other hand, the energy bands were increasingly shifted downward below the Fermi level with increasing numbers of S atoms in N/S-co-doped graphene, which results in n-type behavior. Hence, modulating the structure of graphene through N- and S-doping schemes results in the switching of “p-type” to “n-type” behavior with increasing S concentration. Mulliken population analysis indicates that the N atom doped near a mono-vacancy is negatively charged due to its higher electronegativity compared to C, whereas the S atom doped near a mono-vacancy is positively charged due to its similar electronegativity to C and its additional valence electrons. As a result, doping with N and S significantly influences the unique electronic properties of graphene. Due to their tunable band-structure properties, the resulting N- and S-doped graphenes can be used in energy and electronic-device applications. In conclusion, we expect that doping with N and S will lead to new pathways for tailoring and enhancing the electronic properties of graphene at the atomic level.

Nanostructured anode materials

Throughout the lithium ion battery (LIB) history, since they were mass produced by Sony in 1991, graphite-based materials have been the anode material of choice. There have been enormous efforts to search for ways of tapping higher energy with alternative anode materials to work in LIBs. Yet, those materials have always been subjected to detrimental mechanisms that hinder their applications in LIBs. Will nanotechnology and nanostructured anode materials change the energy storage technologies markedly in the future?

Aqueous Preparation of Platinum Nanoflowers on Three-Dimensional Graphene for Efficient Methanol Oxidation

A facile aqueous method to construct a platinum nanoflowers (PtNFs)/three-dimensional (3D) graphene electrode for electrochemical catalysis was demonstrated. PtNFs composed of thin Pt nanowires with the length of 6–16 nm and the diameter of 2–3 nm were prepared on 3D graphene foam as a growth template in the aqueous solution without any surfactant. The 3D graphene foam was used for patterning PtNFs and controlling their morphology. The fabricated PtNF/3D graphene electrode was applied for electrocatalytic methanol oxidation. Electrochemical measurements show that the PtNF/3D graphene electrode has higher electrocatalytic activity and better stability than commercial Pt-C modified glassy carbon electrode. It displays promising potential for applications in fuel cells.