Synthesis of Cu and Zr-based coordination polymers with N/O donors and investigation of their photocatalytic activity against dye

The coordination polymers (CPs) of Cu and Zr were synthesized by the hydrothermal method. The orotic acid potassium salt (H3KL) was used as a linker, which coordinates via O-O. Whereas, 4,4'-trimethylenedipyridine (4,4'-TMDP) was used as a bifunctional monomer, which coordinates via N-N. The synthesized CPs were characterized by FTIR, P-XRD, TGA, DSC and SEM. The photocatalytic activity was investigated against methylene blue (MB) under sunlight irradiation. Both Cu-CP and Zr-CP exhibited potential activity for the degradation of MB, which was 72 % for Cu-CP and 93 % for Zr-CP. The band gap of the CPs was also investigated, and the observed value was 2.2 eV. The band gap indicates that these compounds could bring breakthroughs as photocatalysts instead of semiconductors. These kinds of CPs could be used for multiple purposes in industry and in a green environment.

AIEE activated Pyrene-Dansyl coupled FRET probe for discriminating detection of lethal Cu2+ and CN-: Bio-Imaging, DNA binding studies and prompt prognosis of Menke's disease

In present work a pyrene-dansyl dyad functionalized chemoreceptor, DPNS is unveiled towards ultrasensitive chromo-fluorogenic detection of heavy and transition metal ions (HTMs) like Cu2+ and pernicious CN-. It demonstrated distinct chromogenic responses; colorless to faint yellow (Cu2+), intense yellow (CN-) from contaminant aqueous sources. Cu2+ instigated alteration in DPNS fluorescence from feeble emission to sparkling green with LOD: 37.75 × 10-9 M, cyan emission for CN- having LOD 61.51 × 10-8M. In particular, chemical scaffold of DPNS consists of -C = N, O = S = O donor entitities that escalates overall polarity thereby providing an excellent binding pocket for simultaneous Cu2+ and CN- recognition with distinct photophysical signaling. Impressively, presence of two fluorophoric moieties triggers FRET, CHEF phenomenon. The conceivable host:guest interactive pathway is manifested by LMCT- FRET-PET-CHEF, C = N isomerization for Cu2+ and ICT-H-bonding for CN-. An exquisite experimental and theoretical corroboration further strengthened the recognition phenomenon. In addition owing to pyrene excimer formation, DPNS exhibits AIEE with increasing water fraction. Notably, DPNS could successfully undergo intracellular tracking of Cu2+ in Tecoma Stans, Peperomia Pellucida. DPNS•••Cu2+ adduct displayed significant intercalative DNA binding activity rationalized by spectral investigation, competitive EB binding, viscosity study. The overall findings, excellent properties endows DPNS a potential contender towards discriminative detection of Cu2+ and CN- like toxic industrial contaminants.

Photoactive glycoconjugates with a very large Stokes shift: synthesis, photophysics, and copper(II) and BSA sensing

This study presents the synthesis of novel glycoconjugates by connecting benzazole and carbohydrate units with a 1,2,3-triazole linker. A simple synthetic route employing a copper(I) catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC) was utilized. The synthesized compounds exhibit excited-state intramolecular proton transfer (ESIPT), resulting in longer wavelength emission with a significantly large Stokes shift (∼10 000 cm-1). These compounds show potential as chemical sensors due to their ability to detect Cu2+ ions, causing a decrease in fluorescence emission (turn-off effect). Additionally, they demonstrate strong interaction with proteins, exemplified by their interaction with bovine serum albumin (BSA) as a model protein.

A new series of magnetic and luminescent layered hybrid materials obtained from thianthrene phosphonic acid: M(H2O)PO3-S2C12H7 (M = Cu, Zn) and M(H2O)2(PO2OH-S2C12H7)2 (M = Mn, Co)

Four new metallophosphonates with the chemical formulae M(H2O)PO3-S2C12H7 (M = Cu, Zn) and M(H2O)2(PO2OH-S2C12H7)2 (M = Mn, Co) were synthesized using a hydrothermal route from the original bent rigid thianthrene-2-ylphosphonic acid (TPA). This organic precursor crystallizes in a non-centrosymmetric space group P212121 and presents a unique bent geometry due to the presence of two sulfur atoms in its rigid platform architecture. Obtained as single crystal and polycrystalline powders, the structures of the four hybrid materials were solved using X-ray diffraction on single crystals in a monoclinic P21/c space group. These compounds adopt a lamellar structure consisting of one inorganic subnetwork alternating with a 'sawtooth' double organic -S2C12H7 subnetwork. The inorganic layers of these compounds are made of (PO3C) or partially deprotonated (PO2OHC) tetrahedra connected by the apices to isolated ZnO3(H2O) tetrahedra, Cu2O6(H2O)2 copper dimers and cobalt and manganese MO4(H2O)2 octahedra, where the latter two exhibit an isotype structure. Thermogravimetric analysis was performed to confirm the amount of water molecules present in the formula, to track the dehydration process of the structures, and to evaluate their thermal stability. The magnetic properties of the copper, cobalt, and manganese-based materials were investigated from 2 K to 300 K by using a SQUID magnetometer revealing dominant antiferromagnetic interactions with Weiss temperatures of -8.0, -10, and -1 K, respectively. These magnetic behaviors were further corroborated by first-principles simulations based on Density Functional Theory (DFT). Finally, the absorption and photoluminescence properties of both the ligand and hybrid materials were investigated, revealing diverse excitation and recombination mechanisms. The organic moiety based on thianthrene significantly influenced the absorption and emission, with additional peaks attributed to transition metals. Singlet and triplet states recombination were observed, accompanied by an unidentified quenching mechanism affecting the triplet state lifetime.

Hydrogel Nanocomposite Towards Optical Sensing of Spermine in Biomedical and Real-Life Food Samples and Remediation of Toxic Dyes from Wastewater

Nanocomposites such as graphene oxide (GO) have been incorporated into hydrogels to enhance conventional hydrogels' properties and develop new functions. Unique and strong molecular interactions between GO and low molecular weight gelators allow the fabrication of various functional hydrogels suitable for different applications. In the present study, we report a stable and soft nanocomposite hydrogel comprising a pyrene-based chiral amphipath having an amino acid (l-phenylalanine) core with pendant oligo-oxyethylene hydrophilic chains and GO. The mechanical and viscoelastic properties of the nanocomposite hydrogel were thoroughly studied using various spectroscopic, microscopic, and mechanical techniques. Even without GO, native hydrogels could form a self-supported thermoreversible and thixotropic hydrogel composed of the fibrillar network. Unlike native hydrogels, the morphological investigation of nanocomposite gels shows the presence of cross-linked nanosheet-like structures. The combined effect of π-π stacking and H-bonding interactions is the driving force for the formation of such composite hydrogels. Moreover, the nanocomposite hydrogels possess significantly superior mechanical stiffness than the native hydrogels. Interestingly, the thixotropic properties observed with the parent gel were retained even in the presence of carbon nanomaterials (GO). The nanocomposite hydrogel could be employed in the optical sensing of a biogenic polyamine, spermine, resulting in a visible gel-to-sol transition. The superior electrostatic interaction between the GOs and spermine molecules might have led to the release of entrapped fluorogenic dyes from the hydrogel network and a turn-on emission response. The sensory system was employed to analyze spermine content in human urine samples and decomposed food items. A gel-coated paper strip was also developed for onsite detection of the spermine. The nanocomposite hydrogel was further utilized to remove toxic organic dyes such as methylene blue (MB) and rhodamine B (RhB) from the aqueous media. The nanocomposite hydrogel thus showed excellent dye removal capabilities and was also found to be recyclable. Calculations of different mechanical parameters suggest that the dye removal efficiency of the nanocomposite hydrogel was better for MB than for RhB.

Dual-Mode Multiple Ion Sensing via Analyte-Specific Modulation of Keto-Enol Tautomerization of an ESIPT Active Pyrene Derivative: Experimental Findings and Computational Rationalization

A pyrene-based e xcited - state intramolecular proton transfer (ESIPT) active probe PMHMP was synthesized, characterized, and employed for the ppb-level, dual-mode, and high-fidelity detection of Cu²⁺ (LOD: 7.8 ppb) and Zn²⁺ ions (LOD: 4.2 ppb) in acetonitrile medium. The colorless solution of PMHMP turned yellow upon the addition of Cu²⁺, suggesting its ratiometric, naked-eye sensing. On the contrary, Zn²⁺ ions displayed concentration-dependent fluorescence rise till a 0.5 mole fraction and subsequent quenching. Mechanistic investigations indicated the formation of a 1:2 exciplex (Zn²⁺:PMHMP) at a lower concentration of Zn²⁺, which eventually turned into a more stable 1:1 (Zn²⁺:PMHMP) complex with an additional amount of Zn²⁺ ions. However, in both cases, it was observed that the hydroxyl group and the nitrogen atom of the azomethine unit were involved in the metal ion coordination, which eventually altered the ESIPT emission. Furthermore, a green-fluorescent 2:1 PMHMP-Zn²⁺ complex was developed and additionally employed for the fluorimetric analysis of both Cu²⁺ and H₂PO₄ ^- ions. The Cu²⁺ ion, owing to its higher binding affinity for PMHMP, could replace the Zn²⁺ ion from the preformed complex. On the other hand, H₂PO₄ ^- formed a tertiary adduct with the Zn²⁺-complex, leading to a distinguishable optical signal. Furthermore, extensive and organized density functional theory calculations were performed to explore the ESIPT behavior of PMHMP and the geometrical and electronic properties of the metal complexes.

A Novel Quinoline Derivative for Selective and Sensitive Visual Detection of PPB Level Cu2+ in an Aqueous Solution

Aim:

Selective and sensitive visual detection of Cu2+in aqueous solution at PPB level using easily synthesized compound.

Background:

The search for a chemosensor that can detect Cu2+ is very long owing to the fact that an optimum level of Cu2+ is required for human health and the recommended amount of Cu2+ in drinking water is set to be 1-2 mgL-1 . Thus, it is very important to detect Cu2+ even at a very low concentration to assess the associated health risks.

Objective:

We are still seeking for the easiest, cheapest, fastest and greenest sensor that can selectively, sensitively and accurately detect Cu2+ with lowest detection limit. Our objective of this work is to find one such Cu2+ sensor.

Methods:

We have synthesized a quinoline derivative following very easy synthetic procedures and characterize the compound by standard methods. For sensing study, we used steady state absorption and emission spectroscopy.

Results:

Our sensor can detect Cu2+ selectively and sensitively in aqueous solution instantaneously even in the presence of excess amount of other salts. The pale-yellow color of the sensor turns red on the addition of Cu2+ . There is no interference from other cations and anions. A 2:1 binding mechanism of the ligand with Cu2+ is proposed using Jobs plot with binding constant in the order of 109 M-2 . We calculated the LOD to be 18 ppb, which is quite low than what is permissible in drinking water.

Conclusion:

We developed a new quinoline based chemo-sensor following straightforward synthetic procedure from very cheap starting materials that can detect Cu2+ visually and instantaneously in aqueous solution with ppb level sensitivity and zero interference from other ions.

Antimicrobial Peptides and Copper(II) Ions: Novel Therapeutic Opportunities

The emergence of new pathogens and multidrug resistant bacteria is an important public health issue that requires the development of novel classes of antibiotics. Antimicrobial peptides (AMPs) are a promising platform with great potential for the identification of new lead compounds that can combat the aforementioned pathogens due to their broad-spectrum antimicrobial activity and relatively low rate of resistance emergence. AMPs of multicellular organisms made their debut four decades ago thanks to ingenious researchers who asked simple questions about the resistance to bacterial infections of insects. Questions such as "Do fruit flies ever get sick?", combined with pioneering studies, have led to an understanding of AMPs as universal weapons of the immune system. This review focuses on a subclass of AMPs that feature a metal binding motif known as the amino terminal copper and nickel (ATCUN) motif. One of the metal-based strategies of hosts facing a pathogen, it includes wielding the inherent toxicity of copper and deliberately trafficking this metal ion into sites of infection. The sudden increase in the concentration of copper ions in the presence of ATCUN-containing AMPs (ATCUN-AMPs) likely results in a synergistic interaction. Herein, we examine common structural features in ATCUN-AMPs that exist across species, and we highlight unique features that deserve additional attention. We also present the current state of knowledge about the molecular mechanisms behind their antimicrobial activity and the methods available to study this promising class of AMPs.

Regulation of π⋯π stacking interactions between triimidazole luminophores and comprehensive emission quenching by coordination to Cu(ii)

Pioneering work demonstrating coordination preferences towards Cu(ii) of unexplored cyclic triimidazole-based luminophores and their favorable stacking patterns in coordination compounds.

M(H2O)(PO3C10H6OH)·(H2O)0.5 (M = Co, Mn, Zn, Cu): a new series of layered metallophosphonate compounds obtained from 6-hydroxy-2-naphthylphosphonic acid

Four new metallophosphonates M(H₂O)(PO₃C₁₀H₆OH)·(H₂O)_0.5 (M = Mn, Co, Cu, Zn) were obtained as single crystal and polycrystalline powders by hydrothermal synthesis from the precursors 6-hydroxy-2-naphthylphosphonic acid and the corresponding metal salts. These analogous hybrids crystalized in the space group P12₁/c1 in a lamellar structure. Their layered structures consisted of inorganic [M(H₂O)(PO₃C)] layers stacked with organic bilayers of 6-hydroxy-2-naphthyl moieties "HO-C₁₀H₆" and free water molecules. Their structures were determined by single crystal X-ray diffraction and confirmed by powder X-ray diffraction and Le Bail refinement for the powder sample. The removal of water upon heating at 250 °C was studied by thermogravimetric analysis and temperature-dependent powder X-ray diffraction. Their magnetic properties were studied by SQUID magnetometry and show antiferromagnetic behavior for the Co analogue and the occurrence of a canted antiferromagnetic order at T_N = 12.2 K for the Mn analogue. The Cu compound displayed an unprecedented ferromagnetic behavior. Their absorption and luminescence properties were investigated and revealed that the ligand and the compounds displayed a common behavior below a wavelength of 400 nm. Specific absorption bands were found in the compounds with Co²⁺ and Cu²⁺ at 539 nm and 849 nm, respectively. Moreover, particular luminescence bands were found for the compounds with Mn²⁺, Co²⁺ and Zn²⁺ at 598 nm, 551 nm and 530 and 611 nm, respectively.

Two 8-hydroxyquinoline-based fluorescent chemosensors for ultra-fast and sensitive detection of water content in strong polar organic solvents with large Stokes shifts

It is of great significance to detect the moisture in organic solvents before used in water-sensitive reactions. Herein, two Schiff base quinoline derivatives, 8-hydroxyquinoline-2-carboxaldehyde thiosemicarbazone (HQCT) and 8-hydroxyquinoline-2-carboxaldehyde (pyridine-2-carbonyl)-hydrazine (HQPH), were designed and synthesized by a simple one-step reaction, and used as fluorescent chemosensors for ultra-fast and sensitive detection of water content in strong polar organic solvents. Based on excited-state intramolecular proton transfer (ESIPT) process, HQCT and HQPH exhibited strong fluorescence emissions with large Stokes shifts in dimethyl sulfoxide (DMSO) and N, N-dimethylformamide (DMF) solvents compared to other various organic solvents, and their fluorescence quenching and fluorescent color changes were obviously observed with increasing water content. The experimental results revealed that the hydroxyl groups substituted at the 8-position of HQCT and HQPH played a key role in the fluorescence emission processes. Dynamic light scattering (DLS) and ¹H NMR titration indicated that the sensing mechanism for the detection of water was based on inhibition of the ESIPT by H₂O via forming hydrogen bonds. In the range of 0.0-1.8 wt%, the fluorescence intensity of chemosensors changed as a linear function of water content. The detection limits of water in DMSO by HQCT and HQPH were as low as 0.0220 wt% and 0.0274 wt%, respectively. Moreover, HQCT and HQPH are successfully applied for the detection of moisture content in real commercial organic solvents.

Picolinate-appended tacn complexes for bimodal imaging: Radiolabeling, relaxivity, photophysical and electrochemical studies

Based on our previous works involving two 1,4,7-triazacyclononane (tacn)-based ligands Hno2py1pa (1-Picolinic acid-4,7-bis(pyridin-2-ylmethyl)-1,4,7-triazacyclononane) and Hno1pa (1-Picolinic acid-1,4,7-triazacyclononane), we report here the synthesis of analogues bearing picolinate-based π-conjugated ILCT (Intra-Ligand Charge Transfer) transition antenna (HL1, HL2), using regiospecific N-functionalization of the tacn skeleton and their related transition metal complexes (e.g. Cu²⁺, Zn²⁺ and Mn²⁺). Coordination properties as well as their photophysical and electrochemical properties were investigated in order to quantify the impact of such antenna on the luminescent or relaxometric properties of the complexes. The spectroscopic properties of the targeted ligands and metal complexes have been studied using UV-Vis absorption and fluorescence spectrocopies. While the zinc complex formed with HL1 possesses a moderate quantum yield of 5%, complexation of Cu²⁺ led to an extinction of the luminescence putatively attributed to a photo-induced electron transfer, as supported by spectroscopic and electrochemical evidences. The [Mn(L2)]⁺ complex is characterized by a fluorescence quantum yield close to 8% in CH₂Cl₂. The potential interest of such systems as bimodal probes has been assessed from radiolabeling experiments conducted on HL1 and ⁶⁴Cu²⁺ as well as confocal microscopy analyses and from relaxometric studies carried out on the cationic [Mn(L2)]⁺ complex. These results showed that HL1 can be used for radiolabeling, with a radiochemical conversion of 40% in 15 min at 100 °C. Finally, the relaxivity values obtained for [Mn(L2)]⁺, r_1p = 4.80 mM^-1·s^-1 and r_2p = 8.72 mM^-1·s^-1, make the Mn(II) complex an ideal candidate as a probe for Magnetic Resonance Imaging.

A rhodamine-based fluorescent sensor for selective detection of Cu2+ in aqueous media: synthesis and spectroscopic properties

Two new chemosensors, rhodamine B derivative bearing 3-formyl-6-nitrochromone (L ₁ ) and 3-formyl-6-methylchromone (L ₂ ) units were designed and synthesized using microwave irradiation for the selective detection of Cu²⁺ in aqueous media. Copper triggers the formation of highly fluorescent ring-open spirolactam. The fluorescence intensity was remarkably increased upon the addition of Cu²⁺ within a minute, while the other metal ions caused no significant effect. More importantly, the resulting complexes can be used as a reversible fluorescence sensor for CN^-. The recognition ability of the sensors was investigated by fluorescence titration, Job's plot, ¹H NMR spectroscopy and density functional theory (DFT) calculations.

Synthesis and characterization of ethyl benzotriazolyl acrylate-based D-π-A fluorophores for live cell-based imaging applications

A series of eight new ethyl (Z)-benzotriazolyl acrylates 6a-d and 7a-d have been synthesized by conventional heating and microwave irradiation from ethyl benzotriazolyl acetates 3 and 4 with the corresponding aromatic aldehydes. This work reports the synthetic approach and spectroscopic characterization (1H, 13C-NMR, HRMS) of all the synthesized compounds. X-ray diffraction analyses were performed for molecules 6a, 7a and 7d. Photophysical properties of compounds were evaluated. Finally, compound 6a was tested in a human cell line and showed low to no cytotoxicity at relevant concentrations. Initial testing demonstrates its potential use as a fluid-phase fluorescent marker for live cell imaging.

Synthesis, crystal structures, photoluminescence, magnetic and antioxidant properties, and theoretical analysis of Zn(ii) and Cu(ii) complexes of an aminoalcohol ligand supported by benzoate counter anions

Two photoluminescent Zn(ii) and Cu(ii) complexes are designed, characterized and assessed for DNA binding and antioxidant properties.

A dual target chemosensor for the fluorometric detection of In3+ and colorimetric detection of Fe3

A new dual target chemosensor 1, 1,1'‑((1E,1'E)‑((thiobis(ethane‑2,1‑diyl))bis(azanylylidene))bis(methanylylidene))bis(naphthalen‑2‑ol), was prepared by the reaction of a hydroxy-naphthaldehyde and a thiobis(ethylamine). Sensor 1 detected In³⁺ with turn-on fluorescence and Fe³⁺ via the change of color from colorless to pale violet. The sensing behaviors of 1 toward In³⁺ and Fe³⁺ were studied through photophysical experiments, ESI-mass, NMR titration, and theoretical calculations. In particular, 1 can discriminate In³⁺ from Al³⁺ and Fe³⁺ from Fe²⁺. Limits of detection for the analysis of In³⁺ and Fe³⁺ ions turned out to be 5.89 μM and 0.30 μM, respectively. In addition, sensor 1 functioned practically as a naked-eye test strip for Fe³⁺ and could be recycled by using EDTA for In³⁺ and DFO for Fe³⁺.

3-[Bis(pyridin-2-ylmethyl)amino]-5-(4-carboxyphenyl)-BODIPY as Ratiometric Fluorescent Sensor for Cu2

We developed an asymmetric fluorescent sensor 1 for Cu²⁺, based on 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY), by introducing 4-carboxyphenyl and bis(pyridin-2-ylmethyl)amine groups at the 5- and 3-positions, respectively, of the BODIPY core. We then investigated the photophysical and cation-sensing properties of the sensor. BODIPY 1 showed large absorption and fluorescence spectral shifts on binding to Cu²⁺. The fluorescence peak at 580 nm red-shifted to 620 nm. The binding stoichiometry of BODIPY 1 and Cu²⁺ was 1:3. The ratio of the fluorescence intensity at 620 nm to that at 580 nm (F₆₂₀/F₅₈₀) increased with increasing concentration of Cu²⁺ (3–10 equiv); this enabled ratiometric determination of Cu²⁺. Although BODIPY 1 showed good selectivity for Cu²⁺, there was an interfering effect of Fe³⁺. BODIPY 1 could be used for the naked-eye detection of Cu²⁺ in a water-containing sample.

Achieving selectivity for copper over zinc with luminescent terbium probes bearing phenanthridine antennas

A family of terbium probes was synthesized and evaluated for the luminescence detection of copper and zinc in water at neutral pH. Each probe incorporates a terbium ion chelated by a macrocyclic polyaminocarboxylate and conjugated to either one, two, or three phenanthridine antennas via a diamine linker. All three probes, Tb-1Phen, Tb-2Phen, and Tb-3Phen, exhibit similar responses toward copper and zinc. In each case, the terbium-centered time-gated phosphorescence decreases upon binding either Cu^I or Cu^II but not upon addition of Zn^II. The phosphorescence of Tb-2Phen is also not significantly affected by other metal ions including Mg^II, Ca^II, Mn^II, Fe^II, Ni^II, Cd^II, and Hg^II. Tb-1Phen, on the other hand, responds weakly to Mn^II, Fe^II and Ni^II. The lack of affinity of each probe for Zn^II was further confirmed by competition experiments with Cu^I and Cu^II. Notably, whereas the terbium-centered emission of each probe is quenched upon copper coordination, the phenanthridine-centered luminescence emission is not. As such, each probe functions as a ratiometric probe for the selective detection of copper over zinc. Theoretical calculations further demonstrate that the turn off response of the probe is due to an increase in the distance separating the lanthanide ion from its phenanthridine antennas upon coordination of copper, which in turn decreases the efficiency of terbium sensitization by the phenanthridines.

Synthetic receptor molecules for selective fluorescence detection of 8-oxo-dGTP in aqueous media

A series of 9-hydroxy-1,3-diazaphenoxazine-2-one derivatives were synthesized as fluorescent receptor molecules for 8-oxo-dGTP, which attach the cyclen-zinc complex at the 3-N position as the binding site for the triphosphate and the (2-aryloxycarbonylamino)ethyl group at the 9-O position as the hydrogen bonding site for 8-oxoguanine. Among these molecules, the receptor molecule 5a-Zn constructed of the ethyl linker at 3-N and the (2-benzyloxycarbonyl amino)ethyl group at 9-O displayed the best recognition ability for 8-oxoguanosine triphosphate (8-oxo-dGTP) in aqueous media. The receptor 5a-Zn was also shown to selectively detect 8-oxo-dGTP in a cell lysate solution.

A multifunctional selective “turn-on” fluorescent chemosensor for detection of Group IIIA ions Al3+, Ga3+ and In3+

A versatile chemosensor was developed for highly distinguishable and selective recognition of group IIIA metal ions (Al³⁺, Ga³⁺ and In³⁺).

N9 substituent mediated structural tuning of copper–purine complexes: chelate effect and thin film studies

Six Cu(ii) complexes of strategically designed derivatives of 6-chloropurine, one of which has been explored as a thin film precursor on quartz and Si(111) surfaces by using chemical vapor deposition (CVD).

Real-time detection and imaging of copper(ii) in cellular mitochondria

L displays high selectivity for Cu²⁺ with a rapidly reversible on–off–on fluorescence switch.

A highly selective “ON–OFF” probe for colorimetric and fluorometric sensing of Cu2+in water

A new diformyl phenol based probe for selective detection of Cu²⁺in aqueous medium, applicable for cell imaging in Vero cells. Theoretical studies were performed to establish the underlying keto–enol tautomerism and optimization of the Cu²⁺complex.

Aminoalcohols and benzoates-friends or foes? Tuning nuclearity of Cu(ii) complexes, studies of their structures, magnetism, and catecholase-like activities as well as performing DFT and TDDFT studies

The Cu(ii) complexes of varying nuclearity are synthesized, characterized and assessed for catecholase activities.

An unusual (4,4)-connected 3D porous cadmium metal–organic framework as a luminescent sensor for detection of nitrobenzene

The MOF 1 shows an unusual (4,4)-connected 3D porous network. The high quenching efficiency of 1 is up to 98.2% at 160 ppm NBZ. 1 displays highly selectivity, sensitivity and recyclability in the detection of nitrobenzene.

A novel Schiff-base as a Cu(II) ion fluorescent sensor in aqueous solution

A new fluorescent Cu(II) sensor (L) obtained from the Schiff base of 5,5'-methylene-bis-salicylaldehyde with amidol (2,4-diaminophenol) was synthesized and characterized by FT-IR, MS, (1)H NMR, (13)C NMR techniques. In the presence of pH 6.5 (KHPO4-Na2HPO4) buffer solutions, copper reacted with L to form a stable 2:1 complex. Fluorescence spectroscopic study showed that Schiff base is highly sensitive towards Cu(II) over other metal ions (K(+), Na(+), Al(3+), Ni(2+), Co(2+), Fe(3+), Zn(2+), Pb(2+)) in DMSO/H2O (30%, v/v). The sensor L was successfully applied to the determination of copper in standard reference material. The structural properties and molecular orbitals of the complex formed between L and Cu(2+) ions were also investigated using quantum chemical computations.

Two dinuclear Ru(II) polypyridyl complexes with different photophysical and cation recognition properties

Two dinuclear Ru(II) polypyridyl complexes functionalized with vacant coordination sites have been designed and synthesized. Their photophysical properties and interactions with various metal ions have been investigated at room temperature. The two complexes exhibit different UV/Vis absorption and emission intensities. When titrated with various metal ions, complex [{Ru(bpy)2}2(μ2-L(1))](4+) exhibits a notable fluorescence quenching in the presence of Cu(2+) in H2O-CH3CN media (1:1, v/v); its analogous complex [{Ru(bpy)2}2(μ2-L(2))](4+) exhibits no cation selectivity, the fluorescence intensity of complex [{Ru(bpy)2}2(μ2-L(2))](4+) has been enhanced by several transition metal ions due to prevention of the photo-induced electron transfer process. The fluorescence titration spectra and Benesi-Hildebrand expression reveal the formation of a 1:1 bonding mode between [{Ru(bpy)2}2(μ2-L(1))](4+) and Cu(2+) ion with the association constant of 5.50×10(4) M(-1).

A highly selective CHEF-type chemosensor for monitoring Zn2+ in aqueous solution and living cells

A new quinolone-based chemosensor was synthesized and successfully applied to quantify and image Zn²⁺ in water samples and living cells.